Pages : 1
#1 Le 04/07/2009, à 21:36
- Aurel07
[Upgrade]Carte mère compatible C2Duo ?
Bonsoir a tous,
J'ai un vieux portable (5ans) avec un proc pentiom 4 qui chauffe a mort et qui du coup fait planter la machine de temps en temps. Cependant, il a un écran 17 pouces vachement bien, et je voudrais savoir si sa carte mere serait capable de prendre un processeur plus récent qui chauffe moins, genre un de la serie des "core".
J'y connais rien en carte mere, mais voici ce que j'ai pu apprendre :
Résultat de dmidecode :
# dmidecode 2.9
SMBIOS 2.31 present.
29 structures occupying 906 bytes.
Table at 0x000DC010.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: PHOENIX FirstBIOS
Version: V2.90.T05
Release Date: 05/26/2005
Address: 0xE4160
Runtime Size: 114336 bytes
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
ACPI is supported
USB legacy is supported
AGP is supported
Smart battery is supported
BIOS boot specification is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: Acer
Product Name: Aspire 1800
Version: Null
Serial Number: Null
UUID: 37383433-3838-3464-6666-000XXXXXXX
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Acer
Product Name: Aspire 1800
Version: Null
Serial Number: LXA2905XXXXXXXXXX
Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
Manufacturer: No Enclosure
Type: Other
Lock: Not Present
Version: N/A
Serial Number: None
Asset Tag: No Asset Tag
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: 52 U
Number Of Power Cords: 18
Contained Elements: 0
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: WMT478/NWD
Type: Central Processor
Family: Pentium 4
Manufacturer: Intel
ID: 34 0F 00 00 FF FB EB XX
Signature: Type 0, Family 15, Model 3, Stepping 4
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: D0
Voltage: 1.8 V
External Clock: 200 MHz
Max Speed: 1600 MHz
Current Speed: 3200 MHz
Status: Populated, Enabled
Upgrade: Slot 1
L1 Cache Handle: 0x0008
L2 Cache Handle: 0x0009
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0005, DMI type 5, 20 bytes
Memory Controller Information
Error Detecting Method: None
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 1024 MB
Maximum Total Memory Size: 2048 MB
Supported Speeds:
70 ns
60 ns
Supported Memory Types:
DIMM
SDRAM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 2
0x0006
0x0007
Enabled Error Correcting Capabilities:
Unknown
Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: M1
Bank Connections: 0 1
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 512 MB (Double-bank Connection)
Enabled Size: 512 MB (Double-bank Connection)
Error Status: OK
Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: M2
Bank Connections: 2 3
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0008, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 16 KB
Maximum Size: 16 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0009, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 1024 KB
Maximum Size: 512 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000A, DMI type 7, 19 bytes
Cache Information
Socket Designation: L3 Cache
Configuration: Enabled, Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 1024 KB
Maximum Size: 512 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A1
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator: COM 1
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A1
Internal Connector Type: 25 Pin Dual Inline (pin 26 cut)
External Reference Designator: Parallel
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: Circular DIN-8 male
Port Type: Keyboard Port
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: PS/2 Mouse
External Connector Type: Circular DIN-8 male
Port Type: Keyboard Port
Handle 0x000F, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Slot #1 - J5B1
Type: 32-bit PCI
Current Usage: Unknown
Length: Long
ID: 0
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x0010, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Disabled
Description: ADI1886
Handle 0x0011, DMI type 11, 5 bytes
OEM Strings
String 1: This is the Intel 915G
String 2: Customer Reference Board
Handle 0x0012, DMI type 12, 5 bytes
System Configuration Options
Option 1: Jumper settings can be described here.
Handle 0x0013, DMI type 15, 29 bytes
System Event Log
Area Length: 0 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: General-purpose non-volatile data functions
Access Address: 0x0000
Status: Invalid, Full
Change Token: 0x0000002B
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: Single-bit ECC memory error
Data Format 2: Multiple-event
Descriptor 3: Multi-bit ECC memory error
Data Format 3: Multiple-event
Handle 0x0014, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x0015, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0014
Error Information Handle: No Error
Total Width: 72 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: 1
Locator: J6G1
Bank Locator: DIMM 0
Type: DDR
Type Detail: Synchronous
Speed: 133 MHz (7.5 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0016, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0014
Error Information Handle: No Error
Total Width: 72 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: 1
Locator: J6H1
Bank Locator: DIMM 2
Type: DDR
Type Detail: Synchronous
Speed: 133 MHz (7.5 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0017, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0005FFFFFFF
Range Size: 1536 MB
Physical Array Handle: 0x0014
Partition Width: 0
Handle 0x0018, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x0015
Memory Array Mapped Address Handle: 0x0017
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x0019, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00020000000
Ending Address: 0x0005FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0016
Memory Array Mapped Address Handle: 0x0017
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x001A, DMI type 32, 20 bytes
System Boot Information
Status: <OUT OF SPEC>
Handle 0x001B, DMI type 127, 4 bytes
End Of Table
Handle 0x001C, DMI type 127, 4 bytes
End Of TableRésultat de lshw :
acer1800
description: Computer
product: Aspire 1800
vendor: Acer
version: Null
serial: Null
width: 32 bits
capabilities: smbios-2.31 dmi-2.31 smp-1.4 smp
configuration: boot=oem-specific cpus=1 uuid=37383433-3838-3464-6666-000XXXXXXXXX
*-core
description: Motherboard
product: Aspire 1800
vendor: Acer
physical id: 0
version: Null
serial: LXA29050XXXXXXXX
*-firmware
description: BIOS
vendor: PHOENIX FirstBIOS
physical id: 0
version: V2.90.T05 (05/26/2005)
size: 111KiB
capacity: 448KiB
capabilities: isa pci pcmcia pnp apm upgrade shadowing escd acpi usb agp smartbattery biosbootspecification
*-cpu
description: CPU
product: Intel(R) Pentium(R) 4 CPU 3.20GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: 15.3.4
serial: 0000-0F34-0000-0000-0000-0000
slot: WMT478/NWD
size: 3200MHz
width: 32 bits
clock: 200MHz
capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc pebs bts sync_rdtsc pni monitor ds_cpl cid xtpr
configuration: id=0
*-cache:0
description: L1 cache
physical id: 8
slot: L1 Cache
size: 16KiB
capacity: 16KiB
capabilities: asynchronous internal write-back
*-cache:1
description: L2 cache
physical id: 9
slot: L2 Cache
size: 1MiB
capabilities: burst internal write-back
*-logicalcpu:0
description: Logical CPU
physical id: 0.1
width: 32 bits
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 0.2
width: 32 bits
capabilities: logical
*-cache
description: L3 cache
physical id: a
slot: L3 Cache
size: 1MiB
capabilities: burst internal write-back
*-memory
description: System Memory
physical id: 14
slot: System board or motherboard
size: 1536MiB
*-bank:0
description: DIMM DDR Synchronous 133 MHz (7.5 ns)
physical id: 0
slot: J6G1
size: 512MiB
width: 64 bits
clock: 133MHz (7.5ns)
*-bank:1
description: DIMM DDR Synchronous 133 MHz (7.5 ns)
physical id: 1
slot: J6H1
size: 1GiB
width: 64 bits
clock: 133MHz (7.5ns)
*-pci
description: Host bridge
product: 82915G/P/GV/GL/PL/910GL Memory Controller Hub
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 04
width: 32 bits
clock: 33MHz
*-pci:0
description: PCI bridge
product: 82915G/P/GV/GL/PL/910GL PCI Express Root Port
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: 04
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport-driver
*-display UNCLAIMED
description: VGA compatible controller
product: M24 1P [Radeon Mobility X600]
vendor: ATI Technologies Inc
physical id: 0
bus info: pci@0000:01:00.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pm pciexpress vga_controller bus_master cap_list
configuration: latency=0
*-usb:0
description: USB Controller
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.24-gentoo-r7 uhci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 2.06
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12.0MB/s
*-usb:1
description: USB Controller
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@0000:00:1d.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.24-gentoo-r7 uhci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 2.06
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12.0MB/s
*-usb:2
description: USB Controller
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@0000:00:1d.2
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.24-gentoo-r7 uhci_hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 2.06
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12.0MB/s
*-usb:3
description: USB Controller
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4
vendor: Intel Corporation
physical id: 1d.3
bus info: pci@0000:00:1d.3
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.24-gentoo-r7 uhci_hcd
physical id: 1
bus info: usb@5
logical name: usb5
version: 2.06
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12.0MB/s
*-usb:4
description: USB Controller
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@0000:00:1d.7
version: 03
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0 module=ehci_hcd
*-usbhost
product: EHCI Host Controller
vendor: Linux 2.6.24-gentoo-r7 ehci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-2.00
configuration: driver=hub slots=8 speed=480.0MB/s
*-usb:0
description: Mass storage device
product: USB DISK 2.0
physical id: 1
bus info: usb@1:1
logical name: scsi2
version: 1.10
serial: 078A0B4C0FC3
capabilities: usb-2.00 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=200mA speed=480.0MB/s
*-disk
description: SCSI Disk
physical id: 0.0.0
bus info: scsi@2:0.0.0
logical name: /dev/sdb
size: 1866MiB (1956MB)
capabilities: partitioned partitioned:dos
configuration: signature=0001492f
*-volume
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi@2:0.0.0,1
logical name: /dev/sdb1
logical name: /media/disk
version: 1.0
serial: 209baf8e-ad4d-47eb-9cfe-c422bb13d569
size: 1859MiB
capacity: 1859MiB
capabilities: primary journaled extended_attributes large_files huge_files recover ext3 ext2 initialized
configuration: created=2009-07-04 21:51:54 filesystem=ext3 modified=2009-07-04 21:52:29 mount.fstype=ext3 mount.options=rw,nosuid,nodev,data=ordered mounted=2009-07-04 21:52:29 state=mounted
*-usb:1
description: Mass storage device
product: USB 2.0 5 IN 1 CARD READER
vendor: Aspire 1800
physical id: 8
bus info: usb@1:8
logical name: scsi0
version: 3.23
serial: 040525200000
capabilities: usb-2.00 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=96mA speed=480.0MB/s
*-disk
description: SCSI Disk
product: USB20 HS-5IN1
vendor: acer
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: 3.23
capabilities: removable
*-medium
physical id: 0
logical name: /dev/sda
*-pci:1
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: d3
width: 32 bits
clock: 33MHz
capabilities: pci subtractive_decode bus_master cap_list
*-firewire
description: FireWire (IEEE 1394)
product: TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
vendor: Texas Instruments
physical id: 0
bus info: pci@0000:0a:00.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=ohci1394 latency=32 maxlatency=4 mingnt=2 module=ohci1394
*-network:0
description: Ethernet interface
product: NetXtreme BCM5788 Gigabit Ethernet
vendor: Broadcom Corporation
physical id: 1
bus info: pci@0000:0a:01.0
logical name: eth0
version: 03
serial: 00:02:3f:08:76:0b
size: 100MB/s
capacity: 1GB/s
width: 32 bits
clock: 66MHz
capabilities: pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.86 duplex=full firmware=5788-v3.04 ip=88.160.37.59 latency=32 link=yes mingnt=64 module=tg3 multicast=yes port=twisted pair speed=100MB/s
*-network:1 UNCLAIMED
description: Ethernet controller
product: [AirConn] INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)
vendor: Linksys, A Division of Cisco Systems
physical id: 2
bus info: pci@0000:0a:02.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: latency=32 maxlatency=32 mingnt=32
*-pcmcia
description: CardBus bridge
product: CB1410 Cardbus Controller
vendor: ENE Technology Inc
physical id: 4
bus info: pci@0000:0a:04.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=192 module=yenta_socket
*-multimedia
description: Multimedia audio controller
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller
vendor: Intel Corporation
physical id: 1e.2
bus info: pci@0000:00:1e.2
version: 03
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=Intel ICH latency=0 module=snd_intel8x0
*-communication UNCLAIMED
description: Modem
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller
vendor: Intel Corporation
physical id: 1e.3
bus info: pci@0000:00:1e.3
version: 03
width: 32 bits
clock: 33MHz
capabilities: pm generic cap_list
configuration: latency=0
*-isa
description: ISA bridge
product: 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
configuration: latency=0
*-ide
description: IDE interface
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller
vendor: Intel Corporation
physical id: 1f.1
bus info: pci@0000:00:1f.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: ide bus_master
configuration: driver=PIIX_IDE latency=0
*-ide
description: IDE Channel 0
physical id: 0
bus info: ide@0
logical name: ide0
clock: 33MHz
*-disk
description: ATA Disk
product: FUJITSU MHV2080AH
vendor: Fujitsu
physical id: 0
bus info: ide@0.0
logical name: /dev/hda
version: 000000A0
serial: NT61T732MV7P
size: 74GiB (80GB)
capacity: 74GiB (80GB)
capabilities: ata dma lba iordy smart security pm apm partitioned partitioned:dos
configuration: apm=off mode=udma5 signature=00096055 smart=on
*-volume:0
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: ide@0.0,1
logical name: /dev/hda1
logical name: /boot
version: 1.0
serial: b6f404c7-02cb-4ffe-a72b-2cd29d2a912e
size: 39MiB
capacity: 39MiB
capabilities: primary bootable journaled extended_attributes large_files huge_files recover ext3 ext2 initialized
configuration: created=2008-05-04 20:45:10 filesystem=ext3 modified=2009-07-04 21:32:32 mount.fstype=ext2 mount.options=rw,noatime mounted=2009-07-04 21:32:32 state=mounted
*-volume:1
description: Linux swap volume
physical id: 2
bus info: ide@0.0,2
logical name: /dev/hda2
version: 1
serial: 1f50bb3c-071d-4cb3-a8ee-72664cf333f7
size: 980MiB
capacity: 980MiB
capabilities: primary nofs swap initialized
configuration: filesystem=swap pagesize=4096
*-volume:2
description: EXT3 volume
vendor: Linux
physical id: 3
bus info: ide@0.0,3
logical name: /dev/hda3
logical name: /
version: 1.0
serial: 2da1caaa-0a13-4521-9414-d89a4a66d655
size: 9773MiB
capacity: 9773MiB
capabilities: primary journaled extended_attributes large_files huge_files recover ext3 ext2 initialized
configuration: created=2008-05-04 20:46:36 filesystem=ext3 modified=2009-07-04 21:32:31 mount.fstype=ext3 mount.options=rw,noatime,data=ordered mounted=2009-07-04 21:32:31 state=mounted
*-volume:3
description: Extended partition
physical id: 4
bus info: ide@0.0,4
logical name: /dev/hda4
size: 63GiB
capacity: 63GiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume:0
description: Linux filesystem partition
physical id: 5
logical name: /dev/hda5
logical name: /home
capacity: 4777MiB
configuration: mount.fstype=ext3 mount.options=rw,noatime,data=ordered state=mounted
*-logicalvolume:1
description: Linux filesystem partition
physical id: 6
logical name: /dev/hda6
logical name: /media/stockage
capacity: 59GiB
configuration: mount.fstype=ext3 mount.options=rw,noatime,data=ordered state=mounted
*-cdrom
description: DVD-RAM writer
product: MATSHITADVD-RAM UJ-830S
physical id: 1
bus info: ide@0.1
logical name: /dev/hdb
version: 1.00
capabilities: packet atapi cdrom removable nonmagnetic dma lba iordy audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: mode=udma2 status=nodisc
*-serial UNCLAIMED
description: SMBus
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 03
width: 32 bits
clock: 33MHz
configuration: latency=0Est ce qu'un fin connaisseur passant par la saura me dire si je peux remplacer mon P4 kipuékichof par un Intel Core ?
Merci !
Hors ligne
#2 Le 04/07/2009, à 22:03
- wido
Re : [Upgrade]Carte mère compatible C2Duo ?
et je voudrais savoir si sa carte mere serait capable de prendre un processeur plus récent qui chauffe moins, genre un de la serie des "core".
Bonjour, ton pc est un portable si tu veux remplacer la carte mère te reviendra plus cher que le prix de ton portable (ta carte mère n'est plus fabriquée), les cartes mères pour portable ne sont pas conçues comme une carte mère classique (emplacement des usb,lecteur optique, taille de la carte,...) , si tu pensais à acheter une carte mère pour un Core Duo ou Quad core déjà pour monter ton processeur sur la carte te posera des problèmes (Nombre de pin), le seul conseil que je te donne serait d'ouvrir ton portable est de nettoyer le ventilateur avec un surpresseur ou aspirateur sans sac (en cas de perte de pièce ce sera plus facile à le retrouver).
Dernière modification par wido (Le 04/07/2009, à 22:03)
Hors ligne
#3 Le 04/07/2009, à 22:13
- Aurel07
Re : [Upgrade]Carte mère compatible C2Duo ?
Non mais je ne veux pas changer de carte mere ! J'ai lu sur wikipedia que certaines cartes meres pour processeur P4 pouvait prendre des Core (http://fr.wikipedia.org/wiki/LGA_775), mais je suis incapable de savoir si MA carte mere possede le bon socket qui va bien et marche avec les core.
Hors ligne