[résolu] problème au démarrage sur acer aspire 3410

Garsric · Le 10/08/2009, à 14:34

Bonjour,

J'ai récemment acquis un pc portable acer aspire 3410 fourni avec vista.
J'ai installé ubuntu 8.04 (donc noyau 2.6.24) à l'aide d'une live-usb, tout s'est bien passé, le système fonctionnait à peu près, à part un temps de chargement extrêmement long (1 à 2 minutes)
J'ai ensuite fait une migration vers la 8.10 (noyau 2.6.26 je crois) et là l'ordinateur ne veut plus démarrer, sauf si je boot sur le noyau 2.6.24

Le résultat est le même en migrant vers la 9.04 (avec quelques soucis de driver video en plus...). Bref je suis revenu à la 8.10 et je démarre en 2.6.24
edit du 13/12/09 : finalement ça a mis plus de temps à apparaitre mais ça plantait aussi

Le problème c'est que je n'ai pas le wifi, et qu'il semblerait que celui-ci ne fonctionne qu'avec madwifi et un noyau 2.6.29.
Ce noyau ne fonctionne pas non plus, j'ai essayé.

Je poste donc le résultat de dmesg, le premier quand je démarre avec le noyau 24 (quand ça fonctionne), et le second avec le noyau 26.

Si quelqu'un comprend le problème...

irq 221
[   26.514197] ata6: SATA max UDMA/133 abar m2048@0xd4505000 port 0xd4505380 irq 221
[   26.832613] ata1: SATA link down (SStatus 0 SControl 300)
[   27.472313] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   27.473626] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   27.473802] ata2.00: ACPI cmd ef/10:01:00:00:00:b0 succeeded
[   27.473977] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 succeeded
[   27.474152] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 succeeded
[   27.474327] ata2.00: ACPI cmd ef/10:04:00:00:00:b0 succeeded
[   27.474508] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   27.475317] ata2.00: ATA-8: Hitachi HTS545025B9A300, PB2OC60F, max UDMA/133
[   27.475321] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   27.476717] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   27.476898] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   27.477045] ata2.00: configured for UDMA/133
[   27.796155] ata5: SATA link down (SStatus 4 SControl 300)
[   28.116019] ata6: SATA link down (SStatus 4 SControl 300)
[   28.116160] scsi 1:0:0:0: Direct-Access     ATA      Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
[   28.126931] Driver 'sd' needs updating - please use bus_type methods
[   28.132055] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   28.132072] sd 1:0:0:0: [sda] Write Protect is off
[   28.132076] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   28.132096] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   28.132151] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   28.132163] sd 1:0:0:0: [sda] Write Protect is off
[   28.132166] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   28.132185] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   28.132190]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[   28.514829] sd 1:0:0:0: [sda] Attached SCSI disk
[   28.521319] sd 1:0:0:0: Attached scsi generic sg0 type 0
[   58.633854] ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
[   58.633865] ata2.00: cmd 60/08:00:c0:07:a0/00:00:01:00:00/40 tag 0 ncq 4096 in
[   58.633867]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   58.633871] ata2.00: status: { DRDY }
[   58.633882] ata2: hard resetting link
[   60.281102] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   60.282639] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   60.282816] ata2.00: ACPI cmd ef/10:01:00:00:00:b0 succeeded
[   60.282991] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 succeeded
[   60.283165] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 succeeded
[   60.283340] ata2.00: ACPI cmd ef/10:04:00:00:00:b0 succeeded
[   60.283520] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   60.285711] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   60.285894] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   60.286043] ata2.00: configured for UDMA/133
[   60.286060] ata2: EH complete
[   60.286106] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   60.286121] sd 1:0:0:0: [sda] Write Protect is off
[   60.286124] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   60.286145] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   90.655021] ata2.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x2 frozen
[   90.655031] ata2.00: cmd 60/02:00:71:21:5e/00:00:0f:00:00/40 tag 0 ncq 1024 in
[   90.655033]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   90.655037] ata2.00: status: { DRDY }
[   90.655044] ata2.00: cmd 60/80:08:b5:3c:a0/00:00:01:00:00/40 tag 1 ncq 65536 in
[   90.655045]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   90.655049] ata2.00: status: { DRDY }
[   90.655055] ata2.00: cmd 60/80:10:35:3d:a0/00:00:01:00:00/40 tag 2 ncq 65536 in
[   90.655057]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   90.655060] ata2.00: status: { DRDY }
[   90.655066] ata2.00: cmd 60/4d:18:b5:3d:a0/00:00:01:00:00/40 tag 3 ncq 39424 in
[   90.655068]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   90.655071] ata2.00: status: { DRDY }
[   90.655081] ata2: hard resetting link
[   92.302263] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   92.303575] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   92.303754] ata2.00: ACPI cmd ef/10:01:00:00:00:b0 succeeded
[   92.303931] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 succeeded
[   92.304107] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 succeeded
[   92.304283] ata2.00: ACPI cmd ef/10:04:00:00:00:b0 succeeded
[   92.304465] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   92.307163] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   92.307342] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   92.307489] ata2.00: configured for UDMA/133
[   92.307510] ata2: EH complete
[   92.307552] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   92.307567] sd 1:0:0:0: [sda] Write Protect is off
[   92.307570] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   92.307590] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   92.888994] Attempting manual resume
[   92.888998] swsusp: Resume From Partition 8:5
[   92.889000] PM: Checking swsusp image.
[   92.889117] PM: Resume from disk failed.
[   92.926661] kjournald starting.  Commit interval 5 seconds
[   92.926674] EXT3-fs: mounted filesystem with ordered data mode.
[  123.159937] ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
[  123.159993] ata2.00: cmd 60/00:00:86:e4:df/01:00:10:00:00/40 tag 0 ncq 131072 in
[  123.159995]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  123.160044] ata2.00: status: { DRDY }
[  123.160094] ata2: hard resetting link
[  124.807171] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  124.808467] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[  124.808642] ata2.00: ACPI cmd ef/10:01:00:00:00:b0 succeeded
[  124.808812] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 succeeded
[  124.808979] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 succeeded
[  124.809149] ata2.00: ACPI cmd ef/10:04:00:00:00:b0 succeeded
[  124.809324] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[  124.811492] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[  124.811671] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[  124.811817] ata2.00: configured for UDMA/133
[  124.811833] ata2: EH complete
[  124.811868] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[  124.811883] sd 1:0:0:0: [sda] Write Protect is off
[  124.811887] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[  124.811906] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  155.744828] ata2.00: NCQ disabled due to excessive errors
[  155.744835] ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
[  155.744891] ata2.00: cmd 60/88:00:0e:ed:df/00:00:10:00:00/40 tag 0 ncq 69632 in
[  155.744892]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  155.744941] ata2.00: status: { DRDY }
[  155.744990] ata2: hard resetting link
[  157.392063] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  157.393362] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[  157.393532] ata2.00: ACPI cmd ef/10:01:00:00:00:b0 succeeded
[  157.393702] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 succeeded
[  157.393871] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 succeeded
[  157.394045] ata2.00: ACPI cmd ef/10:04:00:00:00:b0 succeeded
[  157.394221] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[  157.396390] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[  157.396569] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[  157.396714] ata2.00: configured for UDMA/133
[  157.396730] ata2: EH complete
[  157.396761] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[  157.396776] sd 1:0:0:0: [sda] Write Protect is off
[  157.396778] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[  157.396798] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  163.916248] udevd version 124 started
[  165.234072] Linux agpgart interface v0.102
[  165.268728] agpgart: Detected an Intel Intel Integrated Graphics Device Chipset.
[  165.269241] agpgart: Detected 65020K stolen memory.
[  165.296170] agpgart: AGP aperture is 256M @ 0xc0000000
[  165.316425] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  165.392419] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  166.092192] input: Power Button (FF) as /devices/virtual/input/input2
[  166.108026] ACPI: Power Button (FF) [PWRF]
[  166.108138] input: Power Button (CM) as /devices/virtual/input/input3
[  166.124014] ACPI: Power Button (CM) [PWRB]
[  166.124101] input: Lid Switch as /devices/virtual/input/input4
[  166.124234] ACPI: Lid Switch [LID0]
[  166.124293] input: Sleep Button (CM) as /devices/virtual/input/input5
[  166.140005] ACPI: Sleep Button (CM) [SLPB]
[  166.140502] ACPI: WMI-Acer: Mapper loaded
[  166.160138] input: PC Speaker as /devices/platform/pcspkr/input/input6
[  166.447880] Atheros(R) AR8121/AR8113/AR8114/AR8131/AR8132 PCI-E Ethernet Network Driver - version 1.0.0.6
[  166.447885] Copyright (c) 2007 - 2009 Atheros Corporation.
[  166.447978] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 17
[  166.447993] PCI: Setting latency timer of device 0000:02:00.0 to 64
[  166.786422] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[  166.786450] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[  166.817453] hda_codec: Unknown model for ALC269, trying auto-probe from BIOS...
[  167.271571] acer_acpi: Acer Laptop ACPI Extras version 0.11.1
[  167.271579] acer_acpi: Detected Acer WMID interface
[  167.525688] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[  167.525767] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa44000
[  167.556712] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[  167.564398] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[  169.305968] ACPI: AC Adapter [ADP1] (on-line)
[  169.386323] Linux video capture interface: v2.00
[  169.408277] ACPI: Battery Slot [BAT0] (battery present)
[  169.454126] uvcvideo: Found UVC 1.00 device HD Video WebCam (064e:a133)
[  169.461479] usbcore: registered new interface driver uvcvideo
[  169.461489] USB Video Class driver (v0.1.0)
[  170.613976] lp: driver loaded but no devices found
[  170.915814] Adding 4096532k swap on /dev/sda5.  Priority:-1 extents:1 across:4096532k
[  171.367291] EXT3 FS on sda6, internal journal
[  172.246267] kjournald starting.  Commit interval 5 seconds
[  172.246429] EXT3 FS on sda7, internal journal
[  172.246434] EXT3-fs: mounted filesystem with ordered data mode.
[  172.496232] audit(1249899187.044:2): type=1505 operation="profile_load" info="unsupported interface version" pid=6212
[  172.756377] audit(1249899187.304:3): type=1505 operation="profile_load" info="unsupported interface version" pid=6217
[  172.883086] ip_tables: (C) 2000-2006 Netfilter Core Team

[    4.450980] ata6: SATA max UDMA/133 abar m2048@0xd4505000 port 0xd4505380 irq 221
[    4.768041] ata1: SATA link down (SStatus 0 SControl 300)
[    5.268037] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.269615] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[    5.269873] ata2.00: ACPI cmd ef/10:01:00:00:00:b0 succeeded
[    5.270052] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 succeeded
[    5.270057] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 filtered out
[    5.270292] ata2.00: ACPI cmd ef/10:04:00:00:00:b0 succeeded
[    5.270479] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[    5.271362] ata2.00: ATA-8: Hitachi HTS545025B9A300, PB2OC60F, max UDMA/133
[    5.271424] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    5.273062] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[    5.273142] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 filtered out
[    5.273384] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[    5.273619] ata2.00: configured for UDMA/133
[    5.608063] ata5: SATA link down (SStatus 0 SControl 300)
[    5.944038] ata6: SATA link down (SStatus 0 SControl 300)
[    5.960156] scsi 1:0:0:0: Direct-Access     ATA      Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
[    5.971884] scsi 1:0:0:0: Attached scsi generic sg0 type 0
[    6.012538] Driver 'sd' needs updating - please use bus_type methods
[    6.012717] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[    6.012800] sd 1:0:0:0: [sda] Write Protect is off
[    6.012859] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.012896] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.013054] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[    6.013135] sd 1:0:0:0: [sda] Write Protect is off
[    6.013192] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.013230] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.013310]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[    6.084830] sd 1:0:0:0: [sda] Attached SCSI disk
[   36.160035] ata2.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
[   36.160118] ata2.00: cmd 60/08:00:00:02:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[   36.160120]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   36.160268] ata2.00: status: { DRDY }
[   36.160326] ata2.00: cmd 60/00:08:e0:00:00/01:00:00:00:00/40 tag 1 ncq 131072 in
[   36.160327]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   36.160476] ata2.00: status: { DRDY }
[   36.160534] ata2: hard resetting link
[   36.644036] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   36.645627] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   36.645882] ata2.00: ACPI cmd ef/10:01:00:00:00:b0 succeeded
[   36.646063] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 succeeded
[   36.646067] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 filtered out
[   36.646306] ata2.00: ACPI cmd ef/10:04:00:00:00:b0 succeeded
[   36.646494] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   36.648964] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   36.649043] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 filtered out
[   36.649289] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   36.649525] ata2.00: configured for UDMA/133
[   36.649597] ata2: EH complete
[   36.649707] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   36.649789] sd 1:0:0:0: [sda] Write Protect is off
[   36.649847] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   36.649883] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   67.032036] ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[   67.032108] ata2.00: cmd 60/08:00:00:0a:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[   67.032110]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   67.032259] ata2.00: status: { DRDY }
[   67.032317] ata2: hard resetting link
[   67.516034] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   67.517612] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   67.517870] ata2.00: ACPI cmd ef/10:01:00:00:00:b0 succeeded
[   67.518052] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 succeeded
[   67.518057] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 filtered out
[   67.518295] ata2.00: ACPI cmd ef/10:04:00:00:00:b0 succeeded
[   67.518483] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   67.520953] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   67.521032] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 filtered out
[   67.521276] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   67.522330] ata2.00: configured for UDMA/133
[   67.522400] ata2: EH complete
[   67.522511] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   67.522593] sd 1:0:0:0: [sda] Write Protect is off
[   67.522651] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   67.522688] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   97.904029] ata2.00: exception Emask 0x0 SAct 0xe SErr 0x0 action 0x6 frozen
[   97.904098] ata2.00: cmd 60/a8:08:aa:3c:a0/00:00:01:00:00/40 tag 1 ncq 86016 in
[   97.904100]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   97.904248] ata2.00: status: { DRDY }
[   97.904307] ata2.00: cmd 60/a8:10:52:3d:a0/00:00:01:00:00/40 tag 2 ncq 86016 in
[   97.904309]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   97.904457] ata2.00: status: { DRDY }
[   97.904515] ata2.00: cmd 60/08:18:fa:3d:a0/00:00:01:00:00/40 tag 3 ncq 4096 in
[   97.904517]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   97.904665] ata2.00: status: { DRDY }
[   97.904722] ata2: hard resetting link
[   98.388036] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   98.389598] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   98.389853] ata2.00: ACPI cmd ef/10:01:00:00:00:b0 succeeded
[   98.390034] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 succeeded
[   98.390039] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 filtered out
[   98.390277] ata2.00: ACPI cmd ef/10:04:00:00:00:b0 succeeded
[   98.390465] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   98.392930] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   98.393009] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 filtered out
[   98.393254] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[   98.393489] ata2.00: configured for UDMA/133
[   98.393561] ata2: EH complete
[   98.393672] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   98.393754] sd 1:0:0:0: [sda] Write Protect is off
[   98.393813] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   98.393850] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

et après ça plus rien ne se passe.

merci pour votre aide

Dernière modification par Garsric (Le 13/12/2009, à 12:20)

Garsric · Le 13/12/2009, à 12:17

J'ai enfin résolu mon problème ! ( le passage à la 9.10 ne m'ayant pas apporté de solution)

J'ai ajouté l'option libata.force=noncq dans Grub et je suis passé d'un démarrage aléatoire qui plantait mon système de fichiers 1 fois qur 10, et prenait au moins 2 minutes quand ça marchait, à un démarrage en 20s !
La solution vient de http://forum.mandriva.com/viewtopic.php?t=120711 , rendons à César ce qui lui appartient.

Pour le détail de la manip :
1. d'abord un test en faisant edit (touche "e" dans grub2) et en ejoutant libata.force=noncq après quiet et splash
2." Ctrl+x" pour booter et... ça fonctionne !
3. ajout définitif de l'option à grub en éditant le fichier /etc/default/grub :
remplacement de la ligne GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
par GRUB_CMDLINE_LINUX_DEFAULT="libata.force=noncq quiet splash"

Voilà si ça peut aider quelqu'un, j'ai vu que je n'étais pas le seul à avoir ce genre de problèmes.

Pour information, dans le BIOS mon disque dur se voit attribuer une option donnant le choix entre IDE et AHCI, pour moi c'est le AHCI qui est activé (j'ai cru comprendre que le NCQ était en rapport). Cela ne pose pas de problème sous vista (livré avec le pc). Serait-ce un problème du noyau Linux ? J'avais le meme soucis sous Fedora 11 (installé pour tester si cela venait d'ubuntu) bien que je n'avait pas de plantage, et que ça démarrait toujours (meme si ça prenait aussi 2 à 3 min)

RodolpheB · Le 14/03/2010, à 17:51

Très grand merci, j'avais exactement le même problème sur mon Aspire 1410 tout neuf qui mettait plus de 3 minutes à démarrer sous Karmic. Maintenant c'est moins d'une minute connexion comprise

Rodolphe

Dernière modification par RodolpheB (Le 14/03/2010, à 17:51)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 10/08/2009, à 14:34

[résolu] problème au démarrage sur acer aspire 3410

#2 Le 13/12/2009, à 12:17

Re : [résolu] problème au démarrage sur acer aspire 3410

#3 Le 14/03/2010, à 17:51

Re : [résolu] problème au démarrage sur acer aspire 3410

Pied de page des forums