Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 29/10/2009, à 01:11

gwado

[Contourné] Démarrer Gnome (ou autres WM) sans écran

Hello tous,

je sature, ça fait des jours que je cherche mais je n'arrive pas à faire démarrer une session gnome (ou autres WM) sur mon serveur (oui, un environnement graphique sur un serveur c'est mal) sans écran branché à celui-ci.

L'idée est bête, ne pas utiliser vnc (qui ne marche pas non plus sans écran branché d'ailleurs) mais ssh pour lancer un lecteur audio sur mon serveur pour écouter de la musique. Ce serveur étant branché sur mes enceintes de salon.

sans environnement graphique lancé, un bête :
ssh -X xxx@192.xxx.xx.xx
puis
vlc
m'affiche vlc mais le son ne se lance pas.

Alors que si gnome (par ex) est lancé (parce qu'un écran est branché), ce vlc fonctionne nickel, il s'affiche sur mon portable (client) et le son sort de mes enceintes vu que vlc "vient" du serveur.

j'ai essayé xvfb, pas super documenté pour un novice comme moi. Xvnc, ça rame beaucoup trop, la ram du serveur se remplit ultra rapidement.
J'ai tenté mpd, sans succès.

Dernière modification par gwado (Le 29/10/2009, à 13:57)

Hors ligne

#2 Le 29/10/2009, à 08:57

herberts

Re : [Contourné] Démarrer Gnome (ou autres WM) sans écran

Pour ta question je ne sais pas trop, mais qu'est ce qui n'a pas marché avec mpd ? Parce que c'est clairement ce qu'il te faut, le serveur mpd sur ton serveur, et des clients partout ailleurs sur ton réseau local, pas besoin de X sur le serveur.

Hors ligne

#3 Le 29/10/2009, à 13:57

gwado

Re : [Contourné] Démarrer Gnome (ou autres WM) sans écran

Bon, j'ai réinstallé la version server d'ubuntu (karmic mais ça importe peu) + openssh.
Ensuite :

sudo apt-get install gdm gnome-core xfonts-base xserver-xorg alsa-base pulseaudio padevchooser mpd ario

j'ai suivi la config rapide de mpd : http://doc.ubuntu-fr.org/mpd#installation_configuration_rapide

(peut-être ai-je oublié quelques manips)
Là, tout fonctionne. GDM ne s'affiche pas sur le serveur (seulement si un écran est branché), mais peu importe le reste fonctionne, le son, mpd, le ftp aussi. Pas besoin de VNC, vu qu'un ssh -X marche nickel.
Bref, c'est plus ou moins réglé smile

Hors ligne

#4 Le 29/10/2009, à 13:58

gwado

Re : [Contourné] Démarrer Gnome (ou autres WM) sans écran

ah oui, pour mpd, j'ai quelques bugs au démarrage, il faut que je kill mpd et que je le relance pour que ça fonctionne.

Hors ligne

#5 Le 29/10/2009, à 14:23

herberts

Re : [Contourné] Démarrer Gnome (ou autres WM) sans écran

Je ne comprend toujours pas pourquoi tu as installé l'interface graphique et pourquoi tu utilises ssh -X pour gérer mpd. Le principe de mpd, c'est justement de le mettre sur un serveur et d'avoir un client distant.

Dernière modification par herberts (Le 29/10/2009, à 14:23)

Hors ligne

#6 Le 29/10/2009, à 16:02

gwado

Re : [Contourné] Démarrer Gnome (ou autres WM) sans écran

Mpd, c'est réglé, j'ai configuré le backend en ligne de commande. Pour le frontend j'utilise ario, forcément en graphique. Donc pas de problème de ce côté là.

Quand je parle de ssh -X, c'est pour certaines manip', je trouve ça plus rapide que VNC. Déjà, à la base j'ai cherché comment utiliser mon serveur pour gérer/écouter de la musique, je suis passé par "([ssh -X rhythmbox])", mt-daapd, mpd, pulseaudio et ses serveurs RTP, UpnP, etc etc Mais je n'arrivais pas à faire fonctionner ce que je voulais.
Maintenant c'est réglé et à la longue j'abandonnerai ssh -X, mais pour le moment, je découvre et n'utilise donc pas encore forcément ce qu'il faut.
Ça va venir smile

Problème suivant : je n'arrive pas à connecter mon disque dur externe sur mon serveur, il n'est pas reconnu.
Sais-tu comment faire,s 'il te plaît ? hmm
merci smile

Dernière modification par gwado (Le 29/10/2009, à 16:03)

Hors ligne

#7 Le 29/10/2009, à 16:08

gwado

Re : [Contourné] Démarrer Gnome (ou autres WM) sans écran

sudo mkdir /media/usbdisk
sudo mount -o umask=0 /dev/sdb1 /media/usbdisk

smile

Hors ligne

#8 Le 29/10/2009, à 16:16

herberts

Re : [Contourné] Démarrer Gnome (ou autres WM) sans écran

Eh bah voilà smile

Pour le ssh -X je comprends mieux, je croyais que tu t'en servais pour utiliser un client mpd sur le serveur directement wink

Hors ligne

#9 Le 29/10/2009, à 16:46

gwado

Re : [Contourné] Démarrer Gnome (ou autres WM) sans écran

Non, ça va je commence à comprendre certains "principes" sous linux depuis Breezy smile

Sinon, j'ai un problème avec mpd. Il faut obligatoirement que je le kill (killall mpd) et que je le relance (mpd) pour qu'il fonctionne.

Hors ligne

#10 Le 29/10/2009, à 16:48

herberts

Re : [Contourné] Démarrer Gnome (ou autres WM) sans écran

peux tu poster ton /etc/mpd.conf ?

Hors ligne

#11 Le 10/11/2009, à 14:26

gwado

Re : [Contourné] Démarrer Gnome (ou autres WM) sans écran

# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.


# Files and directories #######################################################
#
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This 
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
#
music_directory		"/var/lib/mpd/music"
#
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use 
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
#
playlist_directory		"/var/lib/mpd/playlists"
#
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the 
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
#
db_file			"/var/lib/mpd/tag_cache"
# 
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
#
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
#
log_file			"/var/log/mpd/mpd.log"
#
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
#
pid_file			"/var/run/mpd/pid"
#
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server 
# state will be reset on server start up.
#
state_file			"/var/lib/mpd/state"
#
###############################################################################


# General music daemon options ################################################
#
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
#
user				"monuser"
#
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
#
# For network
bind_to_address		"localhost"
#
# And for Unix Socket
#bind_to_address		"/var/run/mpd/socket"
#
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#
#port				"6600"
#
# This setting controls the type of information which is logged. Available 
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#
#log_level			"default"
#
# If you have a problem with your MP3s ending abruptly it is recommended that 
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#
gapless_mp3_playback			"yes"
#
# This setting enables MPD to create playlists in a format usable by other
# music players.
#
#save_absolute_paths_in_playlists	"no"
#
# This setting defines a list of tag types that will be extracted during the 
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#
#metadata_to_use	"artist,album,title,track,name,genre,date,composer,performer,disc"
#
###############################################################################


# Symbolic link behavior ######################################################
#
# If this setting is set to "yes", MPD will discover audio files by following 
# symbolic links outside of the configured music_directory.
#
#follow_outside_symlinks	"yes"
#
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#
#follow_inside_symlinks		"yes"
#
###############################################################################


# Zeroconf / Avahi Service Discovery ##########################################
#
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#
#zeroconf_enabled		"yes"
#
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#
#zeroconf_name			"Music Player"
#
###############################################################################


# Permissions #################################################################
#
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#
#password                        "password@read,add,control,admin"
#
# This setting specifies the permissions a user has who has not yet logged in. 
#
#default_permissions             "read,add,control,admin"
#
###############################################################################


# Input #######################################################################
#

input {
        plugin "curl"
#       proxy "proxy.isp.com:8080"
#       proxy_user "user"
#       proxy_password "password"
}

#
###############################################################################

# Audio Output ################################################################
#
# MPD supports various audio output types, as well as playing through multiple 
# audio outputs at the same time, through multiple audio_output settings 
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
#
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of 
# other audio outputs.
#
# An example of an ALSA output:
#
#audio_output {
#	type		"alsa"
#	name		"My ALSA Device"
#	device		"hw:0,0"	# optional
#	format		"44100:16:2"	# optional
#	mixer_device	"default"	# optional
#	mixer_control	"PCM"		# optional
#	mixer_index	"0"		# optional
#}
#
# An example of an OSS output:
#
#audio_output {
#	type		"oss"
#	name		"My OSS Device"
#	device		"/dev/dsp"	# optional
#	format		"44100:16:2"	# optional
#	mixer_device	"/dev/mixer"	# optional
#	mixer_control	"PCM"		# optional
#}
#
# An example of a shout output (for streaming to Icecast):
#
#audio_output {
#	type		"shout"
#	encoding	"ogg"			# optional
#	name		"My Shout Stream"
#	host		"localhost"
#	port		"8000"
#	mount		"/mpd.ogg"
#	password	"hackme"
#	quality		"5.0"
#	bitrate		"128"
#	format		"44100:16:1"
#	protocol	"icecast2"		# optional
#	user		"source"		# optional
#	description	"My Stream Description"	# optional
#	genre		"jazz"			# optional
#	public		"no"			# optional
#	timeout		"2"			# optional
#}
#
# An example of a httpd output (built-in HTTP streaming server):
#
#audio_output {
#	type		"httpd"
#	name		"My HTTP Stream"
#	encoder		"vorbis"		# optional, vorbis or lame
#	port		"8000"
#	quality		"5.0"			# do not define if bitrate is defined
#	bitrate		"128"			# do not define if quality is defined
#	format		"44100:16:1"
#}
#
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#
audio_output {
	type		"pulse"
	name		"My Pulse Output"
	server		"remote_server"		# optional
	sink		"remote_server_sink"	# optional
}
#
## Example "pipe" output:
#
#audio_output {
#	type		"pipe"
#	name		"my pipe"
#	command		"aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
#	command		"AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
#	command		"nc example.org 8765"
#	format		"44100:16:2"
#}
#
## An example of a null output (for no audio output):
#
#audio_output {
#	type		"null"
#	name		"My Null Output"
#}
#
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#
#audio_output_format		"44100:16:2"
#
# If MPD has been compiled with libsamplerate support, this setting specifies 
# the sample rate converter to use.  Possible values can be found in the 
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#
#samplerate_converter		"Fastest Sinc Interpolator"
#
###############################################################################


# Volume control mixer ########################################################
#
# These are the global volume control settings. By default, this setting will
# be detected to the available audio output device, with preference going to 
# hardware mixing. Hardware and software mixers for individual audio_output
# sections cannot yet be mixed.
#
# An example for controlling an ALSA, OSS or Pulseaudio mixer; If this
# setting is used other sound applications will be affected by the volume
# being controlled by MPD.
#
#mixer_type			"hardware"
#
# An example for controlling all mixers through software. This will control
# all controls, even if the mixer is not supported by the device and will not
# affect any other sound producing applications.
#
#mixer_type			"software"
#
# This example will not allow MPD to touch the mixer at all and will disable
# all volume controls.
#
#mixer_type			"disabled"
#
###############################################################################


# Normalization automatic volume adjustments ##################################
#
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "album" or "track". See <http://www.replaygain.org> for more
# details. This setting is disabled by default.
#
#replaygain			"album"
#
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#
#replaygain_preamp		"0"
#
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has 
# equal "loudness". This setting is disabled by default.
#
#volume_normalization		"no"
#
###############################################################################


# MPD Internal Buffering ######################################################
#
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#
#audio_buffer_size		"2048"
#
# This setting controls the percentage of the buffer which is filled before 
# beginning to play. Increasing this reduces the chance of audio file skipping, 
# at the cost of increased time prior to audio playback.
#
#buffer_before_play		"10%"
#
###############################################################################


# Resource Limitations ########################################################
#
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#
#connection_timeout		"60"
#max_connections		"10"
#max_playlist_length		"16384"
#max_command_list_size		"2048"
#max_output_buffer_size		"8192"
#
###############################################################################


# Character Encoding ##########################################################
#
# If file or directory names do not display correctly for your locale then you 
# may need to modify this setting. After modification of this setting mpd 
# --create-db must be run to change the database.
#
filesystem_charset		"UTF-8"
#
# This setting controls the encoding that ID3v1 tags should be converted from.
#
id3v1_encoding			"UTF-8"
#
###############################################################################

Hors ligne