Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 24/01/2010, à 21:28

pdm

Karmic : problème pour entrer dans ma session sous gdm

Bonjour,

j'avais ouvert un sujet sur la question pensant que le souci venait de gdm mais je n'en suis pas sûr.

En fait, il faut que j'entre entre une et sept fois mon mot de passe avant que ma session se lance. Sinon, ça mouline un temps et ça revient à l'entrée du mot de passe.

Voici ce que tout à l'heure, ça a donné dans les logs (mot de passe entré trois fois, la troisième fois étant la bonne.

Sous messages :

Jan 24 20:17:03 localhost pulseaudio[2114]: pid.c: Stale PID file, overwriting.
Jan 24 20:17:03 localhost kernel: [ 1294.158424] agpgart-via 0000:00:00.0: AGP 2.0 bridge
Jan 24 20:17:03 localhost kernel: [ 1294.158447] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
Jan 24 20:17:03 localhost kernel: [ 1294.158509] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode
Jan 24 20:17:03 localhost pulseaudio[2114]: main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NoServer: Failed to connect to socket /tmp/dbus-1mYxMpy3Pa: Connexion refusée
Jan 24 20:17:06 localhost pulseaudio[1877]: sink-input.c: Failed to create sink input: sink is suspended.
Jan 24 20:17:10 localhost kernel: [ 1300.900850] __ratelimit: 3 callbacks suppressed
Jan 24 20:17:10 localhost kernel: [ 1300.900859] fusion-icon[2082]: segfault at 4d0 ip 0048bfe2 sp bfa80460 error 4 in libX11.so.6.2.0[468000+12a000]
Jan 24 20:17:21 localhost pulseaudio[2416]: pid.c: Stale PID file, overwriting.
Jan 24 20:17:21 localhost pulseaudio[2416]: main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NoServer: Failed to connect to socket /tmp/dbus-Coy0mXNWSX: Connexion refusée
Jan 24 20:17:21 localhost kernel: [ 1312.522053] agpgart-via 0000:00:00.0: AGP 2.0 bridge
Jan 24 20:17:21 localhost kernel: [ 1312.522076] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
Jan 24 20:17:21 localhost kernel: [ 1312.522139] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode
Jan 24 20:17:25 localhost pulseaudio[1877]: sink-input.c: Failed to create sink input: sink is suspended.
Jan 24 20:17:46 localhost kernel: [ 1337.548055] ata2: soft resetting link
Jan 24 20:17:47 localhost kernel: [ 1337.724592] ata2.00: configured for UDMA/33
Jan 24 20:17:47 localhost kernel: [ 1337.740451] ata2.01: configured for UDMA/33
Jan 24 20:17:47 localhost kernel: [ 1337.741200] ata2: EH complete

Sous syslog :

Jan 24 20:16:58 localhost gnome-session[1956]: WARNING: Could not launch application 'at-spi-registryd-wrapper.desktop': Unable to start application: L'exécution du processus fils « /usr/lib/gnome-session/helpers/at-spi-registryd-wrapper » a échoué (Aucun fichier ou dossier de ce type)
Jan 24 20:17:01 localhost CRON[2072]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Jan 24 20:17:02 localhost pulseaudio[2009]: module-x11-xsmp.c: X11 session manager not running.
Jan 24 20:17:02 localhost pulseaudio[2009]: module.c: Failed to load  module "module-x11-xsmp" (argument: ""): initialization failed.
Jan 24 20:17:03 localhost console-kit-daemon[540]: GLib-GObject-WARNING: instance of invalid non-instantiatable type `<invalid>'
Jan 24 20:17:03 localhost console-kit-daemon[540]: GLib-GObject-CRITICAL: g_signal_emit_valist: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
Jan 24 20:17:03 localhost console-kit-daemon[540]: GLib-GObject-CRITICAL: g_object_unref: assertion `G_IS_OBJECT (object)' failed
Jan 24 20:17:03 localhost pulseaudio[2114]: pid.c: Stale PID file, overwriting.
Jan 24 20:17:03 localhost acpid: client 1489[0:0] has disconnected
Jan 24 20:17:03 localhost acpid: client connected from 2104[0:0]
Jan 24 20:17:03 localhost kernel: [ 1294.158424] agpgart-via 0000:00:00.0: AGP 2.0 bridge
Jan 24 20:17:03 localhost kernel: [ 1294.158447] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
Jan 24 20:17:03 localhost kernel: [ 1294.158509] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode
Jan 24 20:17:03 localhost pulseaudio[2114]: main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NoServer: Failed to connect to socket /tmp/dbus-1mYxMpy3Pa: Connexion refusée
Jan 24 20:17:06 localhost pulseaudio[1877]: alsa-sink.c: Error opening PCM device front:0: Périphérique ou ressource occupé
Jan 24 20:17:06 localhost pulseaudio[1877]: sink-input.c: Failed to create sink input: sink is suspended.
Jan 24 20:17:10 localhost kernel: [ 1300.900850] __ratelimit: 3 callbacks suppressed
Jan 24 20:17:10 localhost kernel: [ 1300.900859] fusion-icon[2082]: segfault at 4d0 ip 0048bfe2 sp bfa80460 error 4 in libX11.so.6.2.0[468000+12a000]
Jan 24 20:17:15 localhost pulseaudio[2290]: pid.c: Daemon already running.
Jan 24 20:17:16 localhost gnome-session[2239]: WARNING: Could not launch application 'at-spi-registryd-wrapper.desktop': Unable to start application: L'exécution du processus fils « /usr/lib/gnome-session/helpers/at-spi-registryd-wrapper » a échoué (Aucun fichier ou dossier de ce type)
Jan 24 20:17:18 localhost pulseaudio[2114]: module-x11-xsmp.c: Failed to open connection to session manager: Could not open network socket
Jan 24 20:17:18 localhost pulseaudio[2114]: module.c: Failed to load  module "module-x11-xsmp" (argument: ""): initialization failed.
Jan 24 20:17:21 localhost pulseaudio[2416]: pid.c: Stale PID file, overwriting.
Jan 24 20:17:21 localhost console-kit-daemon[540]: GLib-GObject-WARNING: instance of invalid non-instantiatable type `(null)'
Jan 24 20:17:21 localhost console-kit-daemon[540]: GLib-GObject-CRITICAL: g_signal_emit_valist: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
Jan 24 20:17:21 localhost console-kit-daemon[540]: GLib-GObject-CRITICAL: g_object_unref: assertion `G_IS_OBJECT (object)' failed
Jan 24 20:17:21 localhost acpid: client 2104[0:0] has disconnected
Jan 24 20:17:21 localhost acpid: client connected from 2421[0:0]
Jan 24 20:17:21 localhost pulseaudio[2416]: main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NoServer: Failed to connect to socket /tmp/dbus-Coy0mXNWSX: Connexion refusée
Jan 24 20:17:21 localhost kernel: [ 1312.522053] agpgart-via 0000:00:00.0: AGP 2.0 bridge
Jan 24 20:17:21 localhost kernel: [ 1312.522076] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
Jan 24 20:17:21 localhost kernel: [ 1312.522139] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode
Jan 24 20:17:25 localhost pulseaudio[1877]: alsa-sink.c: Error opening PCM device front:0: Périphérique ou ressource occupé
Jan 24 20:17:25 localhost pulseaudio[1877]: sink-input.c: Failed to create sink input: sink is suspended.
Jan 24 20:17:34 localhost pulseaudio[2575]: pid.c: Daemon already running.
Jan 24 20:17:34 localhost gnome-session[2524]: WARNING: Could not launch application 'at-spi-registryd-wrapper.desktop': Unable to start application: L'exécution du processus fils « /usr/lib/gnome-session/helpers/at-spi-registryd-wrapper » a échoué (Aucun fichier ou dossier de ce type)
Jan 24 20:17:36 localhost pulseaudio[2416]: module-x11-xsmp.c: Failed to open connection to session manager: Could not open network socket
Jan 24 20:17:37 localhost pulseaudio[2416]: module.c: Failed to load  module "module-x11-xsmp" (argument: ""): initialization failed.
Jan 24 20:17:46 localhost kernel: [ 1337.492532] ata2: drained 4 bytes to clear DRQ.
Jan 24 20:17:46 localhost kernel: [ 1337.492541] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 24 20:17:46 localhost kernel: [ 1337.492547] ata2.01: ST-ATAPI: DRQ=1 with device error, dev_stat 0x59
Jan 24 20:17:46 localhost kernel: [ 1337.492561] ata2.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in
Jan 24 20:17:46 localhost kernel: [ 1337.492563]          cdb 46 02 00 00 00 00 00 00  08 00 00 00 00 00 00 00
Jan 24 20:17:46 localhost kernel: [ 1337.492564]          res 59/20:02:00:08:00/00:00:00:00:00/b0 Emask 0x2 (HSM violation)
Jan 24 20:17:46 localhost kernel: [ 1337.492569] ata2.01: status: { DRDY DRQ ERR }
Jan 24 20:17:46 localhost kernel: [ 1337.548055] ata2: soft resetting link
Jan 24 20:17:47 localhost kernel: [ 1337.724592] ata2.00: configured for UDMA/33
Jan 24 20:17:47 localhost kernel: [ 1337.740451] ata2.01: configured for UDMA/33
Jan 24 20:17:47 localhost kernel: [ 1337.741200] ata2: EH complete

sous user.log

Jan 24 20:17:02 localhost pulseaudio[2009]: module-x11-xsmp.c: X11 session manager not running.
Jan 24 20:17:02 localhost pulseaudio[2009]: module.c: Failed to load  module "module-x11-xsmp" (argument: ""): initialization failed.
Jan 24 20:17:03 localhost pulseaudio[2114]: pid.c: Stale PID file, overwriting.
Jan 24 20:17:03 localhost pulseaudio[2114]: main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NoServer: Failed to connect to socket /tmp/dbus-1mYxMpy3Pa: Connexion refusée
Jan 24 20:17:06 localhost pulseaudio[1877]: alsa-sink.c: Error opening PCM device front:0: Périphérique ou ressource occupé
Jan 24 20:17:06 localhost pulseaudio[1877]: sink-input.c: Failed to create sink input: sink is suspended.
Jan 24 20:17:15 localhost pulseaudio[2290]: pid.c: Daemon already running.
Jan 24 20:17:18 localhost pulseaudio[2114]: module-x11-xsmp.c: Failed to open connection to session manager: Could not open network socket
Jan 24 20:17:18 localhost pulseaudio[2114]: module.c: Failed to load  module "module-x11-xsmp" (argument: ""): initialization failed.
Jan 24 20:17:21 localhost pulseaudio[2416]: pid.c: Stale PID file, overwriting.
Jan 24 20:17:21 localhost pulseaudio[2416]: main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NoServer: Failed to connect to socket /tmp/dbus-Coy0mXNWSX: Connexion refusée
Jan 24 20:17:25 localhost pulseaudio[1877]: alsa-sink.c: Error opening PCM device front:0: Périphérique ou ressource occupé
Jan 24 20:17:25 localhost pulseaudio[1877]: sink-input.c: Failed to create sink input: sink is suspended.
Jan 24 20:17:34 localhost pulseaudio[2575]: pid.c: Daemon already running.
Jan 24 20:17:36 localhost pulseaudio[2416]: module-x11-xsmp.c: Failed to open connection to session manager: Could not open network socket
Jan 24 20:17:37 localhost pulseaudio[2416]: module.c: Failed to load  module "module-x11-xsmp" (argument: ""): initialization failed.

sous daemon.log

Jan 24 20:16:58 localhost gnome-session[1956]: WARNING: Could not launch application 'at-spi-registryd-wrapper.desktop': Unable to start application: L'exécution du processus fils « /usr/lib/gnome-session/helpers/at-spi-registryd-wrapper » a échoué (Aucun fichier ou dossier de ce type)
Jan 24 20:17:03 localhost console-kit-daemon[540]: GLib-GObject-WARNING: instance of invalid non-instantiatable type `<invalid>'
Jan 24 20:17:03 localhost console-kit-daemon[540]: GLib-GObject-CRITICAL: g_signal_emit_valist: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
Jan 24 20:17:03 localhost console-kit-daemon[540]: GLib-GObject-CRITICAL: g_object_unref: assertion `G_IS_OBJECT (object)' failed
Jan 24 20:17:03 localhost acpid: client 1489[0:0] has disconnected
Jan 24 20:17:03 localhost acpid: client connected from 2104[0:0]
Jan 24 20:17:16 localhost gnome-session[2239]: WARNING: Could not launch application 'at-spi-registryd-wrapper.desktop': Unable to start application: L'exécution du processus fils « /usr/lib/gnome-session/helpers/at-spi-registryd-wrapper » a échoué (Aucun fichier ou dossier de ce type)
Jan 24 20:17:21 localhost console-kit-daemon[540]: GLib-GObject-WARNING: instance of invalid non-instantiatable type `(null)'
Jan 24 20:17:21 localhost console-kit-daemon[540]: GLib-GObject-CRITICAL: g_signal_emit_valist: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
Jan 24 20:17:21 localhost console-kit-daemon[540]: GLib-GObject-CRITICAL: g_object_unref: assertion `G_IS_OBJECT (object)' failed
Jan 24 20:17:21 localhost acpid: client 2104[0:0] has disconnected
Jan 24 20:17:21 localhost acpid: client connected from 2421[0:0]
Jan 24 20:17:34 localhost gnome-session[2524]: WARNING: Could not launch application 'at-spi-registryd-wrapper.desktop': Unable to start application: L'exécution du processus fils « /usr/lib/gnome-session/helpers/at-spi-registryd-wrapper » a échoué (Aucun fichier ou dossier de ce type)

sur Xorg.0.log

X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux bureau 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686
Kernel command line: root=UUID=af218972-6d5d-4f1f-8928-bdcd35c71546 ro quiet splash locale=fr_FR 
Build Date: 26 October 2009  05:15:02PM
xorg-server 2:1.6.4-2ubuntu4 (buildd@) 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 24 20:17:21 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "VM99S9"
(**) |   |-->Device "nVidia Corporation NV17 [GeForce4 MX 440]"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:1:0:0) 10de:0171:0000:0000 nVidia Corporation NV17 [GeForce4 MX 440] rev 163, Mem @ 0xde000000/16777216, 0xd0000000/134217728, 0xddc80000/524288, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[b]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  96.43.13  Thu Jun 25 18:56:56 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  96.43.13  Thu Jun 25 18:45:26 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[b]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "TripleBuffer" "true"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce4 MX 440 at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 65536 kBytes
(--) NVIDIA(0): VideoBIOS: 04.17.00.69.00
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce4 MX 440 at PCI:1:0:0:
(--) NVIDIA(0):     Tatung VM99S9 (CRT-0)
(--) NVIDIA(0): Tatung VM99S9 (CRT-0): 350.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(WW) NVIDIA(0): No valid modes for "1280x1024@85"; removing.
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "1600x1200"
(II) NVIDIA(0):     "1280x1024"
(II) NVIDIA(0):     "1024x768"
(II) NVIDIA(0):     "832x624"
(II) NVIDIA(0):     "800x600"
(II) NVIDIA(0):     "720x400"
(II) NVIDIA(0):     "640x480"
(II) NVIDIA(0): Virtual screen size determined to be 1600 x 1200
(--) NVIDIA(0): DPI set to (112, 112); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[b]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GART.
(II) NVIDIA(0): Setting mode "1600x1200"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(WW) NVIDIA(0): Option "AddARGBVisuals" is not used
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 2.2.5
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event2"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB RECEIVER
(**) Logitech USB RECEIVER: always reports core events
(**) Logitech USB RECEIVER: Device: "/dev/input/event5"
(II) Logitech USB RECEIVER: Found 20 mouse buttons
(II) Logitech USB RECEIVER: Found x and y relative axes
(II) Logitech USB RECEIVER: Found scroll wheel(s)
(II) Logitech USB RECEIVER: Configuring as mouse
(**) Logitech USB RECEIVER: YAxisMapping: buttons 4 and 5
(**) Logitech USB RECEIVER: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB RECEIVER" (type: MOUSE)
(**) Logitech USB RECEIVER: (accel) keeping acceleration scheme 1
(**) Logitech USB RECEIVER: (accel) filter chain progression: 2.00
(**) Logitech USB RECEIVER: (accel) filter stage 0: 20.00 ms
(**) Logitech USB RECEIVER: (accel) set acceleration profile 0
(II) Logitech USB RECEIVER: initialized for relative axes.
(II) NVIDIA(0): Setting mode "1280x960"

Voilà, si quelqu'un a une idée de ce qui se passe... pour info, c'est depuis la mise à jour de Jaunty vers Karmic (via synaptic) que ça le fait.

Merci !

Soutenez le logiciel libre, adhérez à l'APRIL !

Hors ligne

#2 Le 06/02/2010, à 16:56

Rmeu

Re : Karmic : problème pour entrer dans ma session sous gdm

La réponse m'intéresse beaucoup car j'ai le même problème en pire depuis que j'ai installé, et même réinstallé Xubuntu Karmic alors que pas de problèmes sous jaunty. Lors de la réinstallation, j'ai même sélectionner l'option connexion direct en tant que Nom de login, mais même résultat, il me demande encore de m'identifier et bug en général plus de  10 fois avanr que j'ai accès à ma session.

Hors ligne

#3 Le 07/02/2010, à 14:09

Rmeu

Re : Karmic : problème pour entrer dans ma session sous gdm

Bonjour,
J'ai continué à batailller de mon côté, et il semble que je sois arrivé à une solution. Ce bug n'a pas l'air de concerner grand monde, mais le problème vient apparemment de la résolution d'écran.
Quand j'ai trouvé cette piste j'ai essayé de passer en 1600x1200, et j'ai planté sur un écran noir.
Après quelques recherches sur live cd, j'ai trouvé plus simple de me retapper l'instal encore une fois. J'ai mis root en ext 4 et laisse home en ext 3 pour ne pas avoir à le formater et garder certaines traces de mon autre intallation. J'ai aussi choisi l'option sans identification (j'avais déjà essayé et ça me demandait quand même de me logger). Une fois la première connexion établi, j'ai de suite mis à jours les pilotes (pour moi ça me proposait des propriétaires nvidia), et je suis allé choisir 1600x1200 a la place du 1024x728. Redemmarrage et , ça marche, plus de mot de passe demandé, et même si je sors de la session et revient, une fois suffit.
Je suis pas très doué en informatique, mais j'espère que ça t'aidera.
Pour info, moi c'est xubuntu karmic avec environement xfce

Hors ligne

Pages : 1