Pages : 1
#1 Le 29/04/2010, à 14:53
- Andolini
Problème Grub2/Vista
Bonjour,
J'ai installé Kubuntu côte à côte avec windows vista. Je pensais avoir placé grub2 sur la partition de Kubuntu mais ce ne doit pas être le cas. En effet, quand je lance mon pc, c'est grub qui se charge. Il m'annonce le menu suivant:
Ubuntu, Linux 2.6.31-14-generic
Ubuntu, Linux 2.6.31-14-generic (recovery mode)
Memory test (memtest86+)
Memory test (memtest86+, serial consol 115200)
Windows Vista (loader) (on /dev/sda1)
Windows Vista (loader) (on /dev/sda2)
A priori pas de problème. Tout se lance nickel sauf Vista (La dernière ligne). Quand je la selectionne, rien ne se passe. Il m'affiche la même page. Je ne sais pas comment booter sur vista ?
Par ailleurs, quand je me place sur cette dernière ligne dans le menu grub et que je tape 'e'. Il me donne ca
insmod ntfs
set root=(hd0,2)
search --no-floppy --fs-uuid --set b28437cb84379139
chainloader +1
D'apès ce que j'ai compris. Ces lignes de codes signifie qu'il pointe sur la partition 2 de mon disque où se trouve effectivement vista. Je vois vraiment pas ce qu'y cloche.
Merci d'avance pour votre aide
Hors ligne
#2 Le 29/04/2010, à 15:27
- malbo
Re : Problème Grub2/Vista
Si tu peux répondre à cette demande, on aura le résultat "panoramique" de ton install :
http://forum.ubuntu-fr.org/viewtopic.php?pid=3226641#p3226641
Je pourrai plus sûrement confirmer avec ce résultat que tu as dû installer malencontreusement Grub dans le secteur de boot de ta partition Vista, ce qui empêche le démarrage de Vista. Tu pourras le voir toi-même dans ce résultat si tu prends le temps de le lire.
Hors ligne
#3 Le 29/04/2010, à 16:00
- Andolini
Re : Problème Grub2/Vista
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
sda1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /BOOTMGR /boot/bcd
sda2: _________________________________________________________________________
File system: ntfs
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sda2 and
looks at sector 258985815 of the same hard drive for
core.img, core.img is at this location on /dev/sda and
looks on partition #5 for /boot/grub. No errors found
in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda3: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda6: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disque /dev/sda: 160.0 Go, 160041885696 octets
255 têtes, 63 secteurs/piste, 19457 cylindres, total 312581808 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Identifiant de disque : 0xe4dfe6d4
Partition Boot Start End Size Id System
/dev/sda1 2,048 20,508,671 20,506,624 27 Hidden HPFS/NTFS
/dev/sda2 * 20,508,672 249,457,270 228,948,599 7 HPFS/NTFS
/dev/sda3 249,457,320 312,576,704 63,119,385 5 Extended
/dev/sda5 249,457,383 309,877,784 60,420,402 83 Linux
/dev/sda6 309,877,848 312,576,704 2,698,857 82 Linux swap / Solaris
blkid -c /dev/null: ____________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 06187BF6187BE35B ntfs Recovery
/dev/sda2 B28437CB84379139 ntfs
/dev/sda5 dd676ef2-a75a-435b-8250-aff7d277a934 ext4
/dev/sda6 76609694-a1a2-4eb2-aa20-586084d7ebad swap
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sda5 / ext4 (rw,errors=remount-ro)
=========================== sda5/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set dd676ef2-a75a-435b-8250-aff7d277a934
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set dd676ef2-a75a-435b-8250-aff7d277a934
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=dd676ef2-a75a-435b-8250-aff7d277a934 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set dd676ef2-a75a-435b-8250-aff7d277a934
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=dd676ef2-a75a-435b-8250-aff7d277a934 ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Vista (loader) (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
search --no-floppy --fs-uuid --set 06187bf6187be35b
chainloader +1
}
menuentry "Windows Vista (loader) (on /dev/sda2)" {
insmod ntfs
set root=(hd0,2)
search --no-floppy --fs-uuid --set b28437cb84379139
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda5/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda5 during installation
UUID=dd676ef2-a75a-435b-8250-aff7d277a934 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=76609694-a1a2-4eb2-aa20-586084d7ebad none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sda5: Location of files loaded by Grub: ===================
132.6GB: boot/grub/core.img
128.5GB: boot/grub/grub.cfg
128.4GB: boot/initrd.img-2.6.31-14-generic
128.4GB: boot/vmlinuz-2.6.31-14-generic
128.4GB: initrd.img
128.4GB: vmlinuz
Hors ligne
#4 Le 29/04/2010, à 16:02
- Andolini
Re : Problème Grub2/Vista
J'ai tous mis. Mais je comprends tout de suite que j'ai écrasé le mbr de vista. Néanmoins, grub amorce le lancement. Pourquoi il ne peut pas trouver le fichier boot de vista
Merci de ton aide
Hors ligne
#5 Le 29/04/2010, à 17:33
- TVorace
Re : Problème Grub2/Vista
à supprimer SVP, le message d'en-dessous est plus pertinent
Dernière modification par TVorace (Le 30/04/2010, à 11:52)
Hors ligne
#6 Le 29/04/2010, à 18:29
- malbo
Re : Problème Grub2/Vista
Andolini,
L'anomalie se trouve dans cette partie de ton résultat :
sda2: _________________________________________________________________________
File system: ntfs
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sda2 and
looks at sector 258985815 of the same hard drive for
core.img, core.img is at this location on /dev/sda and
looks on partition #5 for /boot/grub. No errors found
in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
tu peux voir que le boot sector de la partition sda2 (dont l'OS est Windows Vista comme c'est bien confirmé par le résultat) a été écrasé par Grub. Normalement tu devrais avoir ce que j'ai pour ma partition sdb1 dans le post suivant :
http://forum.ubuntu-fr.org/viewtopic.php?pid=3228560#p3228560
C'est à dire : Boot sector type: Windows Vista/7
Et ça, c'est forcément toi qui l'a fait même si tu n'en as pas conscience (tu n'es pas le premier à faire cette erreur). Il faut donc réparer le secteur de boot de ta partition sda2. La réparation est présentée là :
http://www.vista-xp.fr/forum/topic39.html
C'est l'option fixboot qui permet de réparer (c'est vers la fin du lien ci-dessus) :
/FixBoot: L'option /FixBoot écrit un nouveau secteur de démarrage sur partition système en utilisant un secteur de démarrage qui est compatible avec Windows Vista.
Edit : si tu ne possèdes pas le DVD Vista, tu peux graver un CD avec ça et faire la même chose :
http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/
Edit2 : quand tu auras réparé le secteur de boot de Vista, tu auras viré Grub (puisque tu vas remettre un secteur de boot Vista) donc tu ne pourras pas démarrer Ubuntu. On t'aidera pour rétablir le double démarrage. Sinon, la réponse est là : il faudra installer Grub dans le MBR du disque dur suivant cette procédure qui utilise le live CD :
http://forum.ubuntu-fr.org/viewtopic.php?pid=3081197#p3081197
Dernière modification par malbo (Le 29/04/2010, à 18:51)
Hors ligne
#7 Le 30/04/2010, à 17:12
- jbyvosges
Re : Problème Grub2/Vista
Bonjour.
J'ai à peu près le même problème; je n'arrive plus à utiliser Windows. Avec le script, j'obtiens :
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
=> Windows is installed in the MBR of /dev/sdb
=> Windows is installed in the MBR of /dev/sdg
sda1: _________________________________________________________________________
File system: ntfs
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sda1 and
looks at sector 1199910031 of the same hard drive for
core.img, but core.img can not be found at this
location. No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /bootmgr /Boot/BCD
sda2: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files/dirs: /Windows/System32/winload.exe
Y-a-til une erreur ?
Au vu de ce résultat, pourquoi, pour lancer Windows, grub pointe vers /dev/sda1 et non pas sda2 ?
J'ai aussi :
sdg1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
Je ne vois pas ce que peut être cette partition sdg que je ne vois pas avec Gparted.
En sda1 j'ai SYSTEM, en sda2 HP, en sda3 linux, en sda4 factory image et en sdb5 /home (j'ai mis linux et /home sur 2 disques différents)
Merci d'avance.
msi i5-7500 CPU @ 3.40GHz - 16Go RAM - Ubuntu 22.10
Acer aspire E5-575-3046 i3-6006U - 2.0 GHz -128 Go SSD + 1000 Go - Ubuntu 22.10
Mes sites : https://jbyorchid.fr
https://dolman.fr
Hors ligne
#8 Le 30/04/2010, à 17:56
- malbo
Re : Problème Grub2/Vista
jbyvosges,
Tu as mis grub2 dans le secteur de boot de ta partition sda1 et c'est pour cela je pense que ça ne marche pas. Il faut remplacer Grub2 par le lanceur de Windows dans le secteur de boot de sda1. J'ai indiqué comment faire dans le post #6 (option /FixBoot) pour réparer Vista.
Hors ligne
#9 Le 01/05/2010, à 12:50
- Trouveur
Re : Problème Grub2/Vista
Bonjour à tous.
J'ai exactement le même problème mais avec Windows XP.
Après vérification via le script proposé par Malbo, il m'indique bien Grub2 au lieu de XP sur ma partition NTFS sda1. :-(
Je n'ai pas eu de CD de restauration de Win XP fourni avec mon netbook.
Je suppose qu'il n'existe pas un équivalent du Vista Recovery Disk mais pour XP ?
Aucun moyen de corriger ça directement via un outil Linux en live CD ?
En bonus Lucid ne démarre pas sur mon 311C (un bug connu apparemment), donc je n'ai plus que le live CD (qui lui marche parfaitement...) pour utiliser l'ordi.
Et je n'ai pas de lecteur DVD sur ce modèle.
Hors ligne
#10 Le 01/05/2010, à 14:21
- malbo
Re : Problème Grub2/Vista
Trouveur,
pour réparer le secteur de boot de XP, c'est là :
http://forum.ubuntu-fr.org/viewtopic.php?pid=3254940#p3254940
Comme tu pourras le constater ce lien propose une réparation complète du démarrage de XP. Il est possible de s'arrêter après l'item 4) du lien si tu te limites strictement à la réparation du secteur de boot (c'est à dire au remplacement de Grub par le secteur de boot de chez Windows) et de redémarrer le PC pour voir si ça a suffit à tout remettre en état. C'est toi qui vois.
Dernière modification par malbo (Le 01/05/2010, à 14:28)
Hors ligne
#11 Le 01/05/2010, à 14:45
- Trouveur
Re : Problème Grub2/Vista
Merci beaucoup.
Seul souci, comment puis-je mettre cette image sur une clé USB (pas de lecteur CD) ?
Hors ligne
#12 Le 01/05/2010, à 14:56
- malbo
Re : Problème Grub2/Vista
comment puis-je mettre cette image sur une clé USB (pas de lecteur CD) ?
Je ne sais pas.
Hors ligne
#13 Le 01/05/2010, à 18:03
- jbyvosges
Re : Problème Grub2/Vista
Merci Malbo.
Décidément, je tourne en rond.
Après avoir réinstallé Windows depuis la partition Recovery (oui, je n'ai pas de CD d'install et j'ai formaté la partition Windows par erreur !) je pouvais bien booter Windows, mais plus Linux.
J'ai suivi la procédure décrite dans le dernier lien de ton post 6 pour installer grub dans le mbr (sauf que que la commande grub-install /dev/sda me renvoie un message d'erreur : il faut, apparemment : grub-install --root-directory=/mnt /dev/sda et là ça fonctionne, sauf que ... je ne peux plus lancer Windows !
Au moment du boot sur Seven, j'obtiens un message d'erreur, du style pas de fichier bootable trouvé (je ne me souviens plus très bien)
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
=> Windows is installed in the MBR of /dev/sdb
sda1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /bootmgr /Boot/BCD
sda2: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files/dirs: /Windows/System32/winload.exe
sda3: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
Au secours !
msi i5-7500 CPU @ 3.40GHz - 16Go RAM - Ubuntu 22.10
Acer aspire E5-575-3046 i3-6006U - 2.0 GHz -128 Go SSD + 1000 Go - Ubuntu 22.10
Mes sites : https://jbyorchid.fr
https://dolman.fr
Hors ligne
#14 Le 01/05/2010, à 19:35
- malbo
Re : Problème Grub2/Vista
jbyvosges,
Pourrais-tu tenter une mise à jour de grub ? Tu démarres sur Ubuntu (celui qui est sur sda5) et dans un terminal, tu tapes :
sudo update-grub
Cela devrait entrainer la mise à jour du fichier grub.cfg comme expliqué là :
http://doc.ubuntu-fr.org/grub-pc#configurationreconfiguration_automatisee_du_menu_grub
Puis tu redémarres le PC pour voir si ça marche pour démarrer Win7.
Si ça ne marche toujours pas, je te propose de répondre complètement à cette demande (coller l'intégralité du résultat obtenu - entre balises codes comme expliqué - et pas des morceaux choisis) :
http://forum.ubuntu-fr.org/viewtopic.php?pid=3226641#p3226641
Dernière modification par malbo (Le 01/05/2010, à 19:36)
Hors ligne
#15 Le 01/05/2010, à 19:58
- jbyvosges
Re : Problème Grub2/Vista
Yes ! It works !
Merci Malbo; tu m'enlèves une belle épine du pied.
msi i5-7500 CPU @ 3.40GHz - 16Go RAM - Ubuntu 22.10
Acer aspire E5-575-3046 i3-6006U - 2.0 GHz -128 Go SSD + 1000 Go - Ubuntu 22.10
Mes sites : https://jbyorchid.fr
https://dolman.fr
Hors ligne
#16 Le 05/05/2010, à 16:17
- jbyvosges
Re : Problème Grub2/Vista
J'en ai marre !
Installation d'une mise à jour automatique par le gestionnaire de mises à jour puis reboot :
error the symbol grub puts not found grub rescue
Plus de linux ni de Windows. Obligé de recommencer toute la procédure.
S'il faut recommencer cette galère à chaque mise à jour, je retourne à Windows !
msi i5-7500 CPU @ 3.40GHz - 16Go RAM - Ubuntu 22.10
Acer aspire E5-575-3046 i3-6006U - 2.0 GHz -128 Go SSD + 1000 Go - Ubuntu 22.10
Mes sites : https://jbyorchid.fr
https://dolman.fr
Hors ligne
#17 Le 05/05/2010, à 16:51
- malbo
Re : Problème Grub2/Vista
jbyvosges,
Peux-tu dire de quelle mise à jour (ou de quel ensemble de paquets mis à jour) il s'agit ?
Motif : à l'instant j'ai fait une mise à jour qui incluait une mise à jour du noyau (passage au 2.6.32.22) et la question m'a été posée au sujet de grub-pc si je souhaitais garder la version actuelle ou bien d'autres choix. Moi, c'est un principe, quitte à me faire caguer, je prends à chaque fois la version du responsable du paquet, quelque soit le paquet. As-tu eu la même question ? Et qu'as-tu choisi si la question t'a été posée ?
Hors ligne
#18 Le 05/05/2010, à 17:07
- jbyvosges
Re : Problème Grub2/Vista
Oui, c'est bien ça. Une grosse release avec, entre autres :
status unpacked linux-image-2.6.32-22-generic 2.6.32-22.33
upgrade acpid 1.0.10-5ubuntu2 1.0.10-5ubuntu2.1
Et surtout, ce que je vois à l'instant :
2010-05-05 15:18:01 upgrade grub-pc 1.98-1ubuntu5 1.98-1ubuntu6
2010-05-05 15:18:01 status half-configured grub-pc 1.98-1ubuntu5
2010-05-05 15:18:01 status unpacked grub-pc 1.98-1ubuntu5
2010-05-05 15:18:01 status half-installed grub-pc 1.98-1ubuntu5
2010-05-05 15:18:01 status half-installed grub-pc 1.98-1ubuntu5
2010-05-05 15:18:08 status half-installed grub-pc 1.98-1ubuntu5
2010-05-05 15:18:08 status unpacked grub-pc 1.98-1ubuntu6
2010-05-05 15:18:08 status unpacked grub-pc 1.98-1ubuntu6
2010-05-05 15:18:08 upgrade grub-common 1.98-1ubuntu5 1.98-1ubuntu6
2010-05-05 15:18:08 status half-configured grub-common 1.98-1ubuntu5
2010-05-05 15:18:08 status unpacked grub-common 1.98-1ubuntu5
2010-05-05 15:18:08 status half-installed grub-common 1.98-1ubuntu5
2010-05-05 15:18:08 status half-installed grub-common 1.98-1ubuntu5
Il ne m'a pas posé de question, sauf si je voulais rebooter tout de suite, ce que j'ai voulu faire sans succès.
Ps. Que veut dire ce half-configured et ce half-installed ?
msi i5-7500 CPU @ 3.40GHz - 16Go RAM - Ubuntu 22.10
Acer aspire E5-575-3046 i3-6006U - 2.0 GHz -128 Go SSD + 1000 Go - Ubuntu 22.10
Mes sites : https://jbyorchid.fr
https://dolman.fr
Hors ligne
#19 Le 05/05/2010, à 17:24
- malbo
Re : Problème Grub2/Vista
Ps. Que veut dire ce half-configured et ce half-installed ?
Je jurerais que ça a un rapport avec tes emmerdes mais pour te dire comment réparer ça, je ne sais pas. Si quelqu'un peut aider jbyvosges, ça serait sympa.
Hors ligne
#20 Le 13/07/2011, à 17:52
- Benzouye
Re : Problème Grub2/Vista
Bonjour à tous,
Plus d'un an après, je passe de Karmic à Lucid via l'écran de mise à jour. J'ai validé un peu trop vite les modifications de GRUB ... et comme plusieurs avant moi, je ne peux plus booter sur Win7 (oui je sais, mais j'en ai encore besoin ) curseur clignotant sans fin ...
Ci-dessous le résultat du boot_info_script.
J'ai mon DVD de seven prêt à chauffer pour un /fixboot, mais est-ce nécessaire de flinguer GRUB pour le réinstaller après ? On ne peut pas faire ça plus en douceur ?
D'avance merci
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sda and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks in partition 5 for /boot/grub.
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sdb and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks in partition 5 for /boot/grub.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Grub2 (v1.97-1.98)
Boot sector info: Grub2 (v1.97-1.98) is installed in the boot sector of
sda1 and looks at sector 290061076 of the same hard
drive for core.img, but core.img can not be found at
this location. No errors found in the Boot Parameter
Block.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Grub2 (v1.97-1.98)
Boot sector info: Grub2 (v1.97-1.98) is installed in the boot sector of
sdb1 and looks at sector 291534676 of the same hard
drive for core.img, but core.img can not be found at
this location. No errors found in the Boot Parameter
Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disque /dev/sda: 203.9 Go, 203928109056 octets
255 têtes, 63 secteurs/piste, 24792 cylindres, total 398297088 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 63 273,442,364 273,442,302 7 NTFS / exFAT / HPFS
/dev/sda2 273,442,365 398,283,479 124,841,115 5 Extended
/dev/sda5 273,442,428 322,263,899 48,821,472 83 Linux
/dev/sda6 322,263,963 345,702,734 23,438,772 82 Linux swap / Solaris
/dev/sda7 345,702,798 398,283,479 52,580,682 83 Linux
Drive: sdb _____________________________________________________________________
Disque /dev/sdb: 1000.2 Go, 1000204886016 octets
255 têtes, 63 secteurs/piste, 121601 cylindres, total 1953525168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 1,953,521,663 1,953,519,616 7 NTFS / exFAT / HPFS
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 46D43940D4393391 ntfs Win7
/dev/sda5 d55277ad-c7ab-4336-bc05-aa1b2e9e1061 ext4
/dev/sda6 e077c291-ae49-4ceb-a51f-936b377f1d1f swap
/dev/sda7 00a45f9d-eb1e-4a19-8ca9-f45613930d84 ext4
/dev/sdb1 EC74CCEA74CCB91A ntfs Data
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /media/Win7 fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 / ext4 (rw,errors=remount-ro)
/dev/sda7 /home ext4 (rw)
/dev/sdb1 /media/Données fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
=========================== sda5/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set d55277ad-c7ab-4336-bc05-aa1b2e9e1061
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=1280x720
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set d55277ad-c7ab-4336-bc05-aa1b2e9e1061
set locale_dir=($root)/boot/grub/locale
set lang=fr
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu 10.04.1 LTS lucid, avec Linux 2.6.32-32-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set d55277ad-c7ab-4336-bc05-aa1b2e9e1061
linux /boot/vmlinuz-2.6.32-32-generic root=UUID=d55277ad-c7ab-4336-bc05-aa1b2e9e1061 ro quiet splash
initrd /boot/initrd.img-2.6.32-32-generic
}
menuentry 'Ubuntu 10.04.1 LTS lucid, avec Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set d55277ad-c7ab-4336-bc05-aa1b2e9e1061
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=d55277ad-c7ab-4336-bc05-aa1b2e9e1061 ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry 'Ubuntu 10.04.1 LTS lucid, avec Linux 2.6.31-17-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set d55277ad-c7ab-4336-bc05-aa1b2e9e1061
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=d55277ad-c7ab-4336-bc05-aa1b2e9e1061 ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set d55277ad-c7ab-4336-bc05-aa1b2e9e1061
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set d55277ad-c7ab-4336-bc05-aa1b2e9e1061
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 46d43940d4393391
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
--------------------------------------------------------------------------------
=============================== sda5/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda5 during installation
UUID=d55277ad-c7ab-4336-bc05-aa1b2e9e1061 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda7 during installation
UUID=00a45f9d-eb1e-4a19-8ca9-f45613930d84 /home ext4 defaults 0 2
# swap was on /dev/sda6 during installation
UUID=e077c291-ae49-4ceb-a51f-936b377f1d1f none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/sdb1 /media/Données ntfs defaults 0 0
/dev/sda1 /media/Win7 ntfs defaults 0 0
--------------------------------------------------------------------------------
=================== sda5: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
130.596704483 = 140.227143680 boot/grub/core.img 1
131.053529739 = 140.717656064 boot/grub/grub.cfg 1
132.031663895 = 141.767919616 boot/initrd.img-2.6.31-17-generic 1
130.602354050 = 140.233209856 boot/initrd.img-2.6.32-21-generic 2
141.994775772 = 152.465729536 boot/initrd.img-2.6.32-32-generic 1
130.647043228 = 140.281194496 boot/vmlinuz-2.6.31-17-generic 1
133.666662216 = 143.523485696 boot/vmlinuz-2.6.32-21-generic 2
139.447717667 = 149.730846720 boot/vmlinuz-2.6.32-32-generic 1
141.994775772 = 152.465729536 initrd.img 1
130.602354050 = 140.233209856 initrd.img.old 2
139.447717667 = 149.730846720 vmlinuz 1
133.666662216 = 143.523485696 vmlinuz.old 2
Dernière modification par Benzouye (Le 13/07/2011, à 18:26)
Benzouye
Ubuntu Lucid 64 / Win7
Core i7 920, Asus P6T SE, Ram 6Go, nVidia GT220 1Go
Hors ligne
#21 Le 13/07/2011, à 18:25
- malbo
Re : Problème Grub2/Vista
Benzouye,
Il faut réparer le secteur de Boot de Win7 en suivant ce post : http://forum.ubuntu-fr.org/viewtopic.php?pid=3479840
la partie qui te concerne c'est celle-ci : "Pour ceux qui n'arrivent pas à démarrer Windows (curseur clignotant et retour au menu GRUB), il vous faut restaurer le "boot sector" de votre partition Windows (format NTFS) etc..."
Si tu choisis de réparer avec le DVD Win7 (ou le CD de neosmart), jeanjd63 précise les commandes ici : http://forum.ubuntu-fr.org/viewtopic.ph … 6#p3356636
Pour toi, c'est la commande suivante qui doit être utilisée :
bootrec /fixboot
Dernière modification par malbo (Le 13/07/2011, à 18:29)
Hors ligne
#22 Le 13/07/2011, à 19:34
- Benzouye
Re : Problème Grub2/Vista
Merci malbo ! Quelle réactivité ! Je vais suivre ce topic.
Par contre peux-tu me dire quel devrait être dans mon cas le boot_info_script pour sda1 ?
Benzouye
Ubuntu Lucid 64 / Win7
Core i7 920, Asus P6T SE, Ram 6Go, nVidia GT220 1Go
Hors ligne
#23 Le 14/07/2011, à 10:26
- malbo
Re : Problème Grub2/Vista
Quand tu auras réparé le secteur de boot de ta patition sda1, si tu refais un bootinfoscript, tu trouveras ceci :
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
Hors ligne
#24 Le 17/07/2011, à 19:03
- Benzouye
Re : Problème Grub2/Vista
Bonsoir à tous, je viens débreifer avec vous
1) J'ai booté sur mon DVD Win7, et par la console lancé la commande
bootrec.exe /fixroot
Avec un message de succès. J'e reboot, Grub s'affiche correctement, je peux lancer Win7 mais pas Lucid.
2) J'ai booté sur un live CD 10.04 et suivi la procédure (dénichée et proposée plus haut par malbo) sur ce sujet.
Pour info voici le Boot Info Script après les deux manœuvres.
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sda and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks in partition 5 for /boot/grub.
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sdb and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks in partition 5 for /boot/grub.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Grub2 (v1.97-1.98)
Boot sector info: Grub2 (v1.97-1.98) is installed in the boot sector of
sdb1 and looks at sector 291534676 of the same hard
drive for core.img, but core.img can not be found at
this location. No errors found in the Boot Parameter
Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disque /dev/sda: 203.9 Go, 203928109056 octets
255 têtes, 63 secteurs/piste, 24792 cylindres, total 398297088 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 63 273,442,364 273,442,302 7 NTFS / exFAT / HPFS
/dev/sda2 273,442,365 398,283,479 124,841,115 5 Extended
/dev/sda5 273,442,428 322,263,899 48,821,472 83 Linux
/dev/sda6 322,263,963 345,702,734 23,438,772 82 Linux swap / Solaris
/dev/sda7 345,702,798 398,283,479 52,580,682 83 Linux
Drive: sdb _____________________________________________________________________
Disque /dev/sdb: 1000.2 Go, 1000204886016 octets
255 têtes, 63 secteurs/piste, 121601 cylindres, total 1953525168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 1,953,521,663 1,953,519,616 7 NTFS / exFAT / HPFS
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 46D43940D4393391 ntfs Win7
/dev/sda5 d55277ad-c7ab-4336-bc05-aa1b2e9e1061 ext4
/dev/sda6 e077c291-ae49-4ceb-a51f-936b377f1d1f swap
/dev/sda7 00a45f9d-eb1e-4a19-8ca9-f45613930d84 ext4
/dev/sdb1 EC74CCEA74CCB91A ntfs Data
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /media/Win7 fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 / ext4 (rw,errors=remount-ro)
/dev/sda7 /home ext4 (rw)
/dev/sdb1 /media/Données fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
=========================== sda5/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set d55277ad-c7ab-4336-bc05-aa1b2e9e1061
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=1280x720
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set d55277ad-c7ab-4336-bc05-aa1b2e9e1061
set locale_dir=($root)/boot/grub/locale
set lang=
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu 10.04.1 LTS lucid, with Linux 2.6.32-33-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set d55277ad-c7ab-4336-bc05-aa1b2e9e1061
linux /boot/vmlinuz-2.6.32-33-generic root=UUID=d55277ad-c7ab-4336-bc05-aa1b2e9e1061 ro quiet splash
initrd /boot/initrd.img-2.6.32-33-generic
}
menuentry 'Ubuntu 10.04.1 LTS lucid, with Linux 2.6.32-32-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set d55277ad-c7ab-4336-bc05-aa1b2e9e1061
linux /boot/vmlinuz-2.6.32-32-generic root=UUID=d55277ad-c7ab-4336-bc05-aa1b2e9e1061 ro quiet splash
initrd /boot/initrd.img-2.6.32-32-generic
}
menuentry 'Ubuntu 10.04.1 LTS lucid, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set d55277ad-c7ab-4336-bc05-aa1b2e9e1061
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=d55277ad-c7ab-4336-bc05-aa1b2e9e1061 ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry 'Ubuntu 10.04.1 LTS lucid, with Linux 2.6.31-17-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set d55277ad-c7ab-4336-bc05-aa1b2e9e1061
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=d55277ad-c7ab-4336-bc05-aa1b2e9e1061 ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set d55277ad-c7ab-4336-bc05-aa1b2e9e1061
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set d55277ad-c7ab-4336-bc05-aa1b2e9e1061
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 46d43940d4393391
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
--------------------------------------------------------------------------------
=============================== sda5/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda5 during installation
UUID=d55277ad-c7ab-4336-bc05-aa1b2e9e1061 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda7 during installation
UUID=00a45f9d-eb1e-4a19-8ca9-f45613930d84 /home ext4 defaults 0 2
# swap was on /dev/sda6 during installation
UUID=e077c291-ae49-4ceb-a51f-936b377f1d1f none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/sdb1 /media/Données ntfs defaults 0 0
/dev/sda1 /media/Win7 ntfs defaults 0 0
--------------------------------------------------------------------------------
=================== sda5: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
130.552942276 = 140.180154368 boot/grub/core.img 1
133.645368576 = 143.500621824 boot/grub/grub.cfg 1
132.031663895 = 141.767919616 boot/initrd.img-2.6.31-17-generic 1
130.602354050 = 140.233209856 boot/initrd.img-2.6.32-21-generic 2
141.994775772 = 152.465729536 boot/initrd.img-2.6.32-32-generic 1
139.605566025 = 149.900335104 boot/initrd.img-2.6.32-33-generic 1
130.647043228 = 140.281194496 boot/vmlinuz-2.6.31-17-generic 1
133.666662216 = 143.523485696 boot/vmlinuz-2.6.32-21-generic 2
139.447717667 = 149.730846720 boot/vmlinuz-2.6.32-32-generic 1
139.529966354 = 149.819160576 boot/vmlinuz-2.6.32-33-generic 1
139.605566025 = 149.900335104 initrd.img 1
141.994775772 = 152.465729536 initrd.img.old 1
139.529966354 = 149.819160576 vmlinuz 1
139.447717667 = 149.730846720 vmlinuz.old 1
Encore merci Malbo pour le guidage dans les différents sujets du forum, pas forcément faciles à trouver
Bonne route libre à tous !
Benzouye
Ubuntu Lucid 64 / Win7
Core i7 920, Asus P6T SE, Ram 6Go, nVidia GT220 1Go
Hors ligne
Pages : 1