#1 Le 10/06/2010, à 19:09
- Slystone
[résolu] Problème de connexion avec une carte pci realtek 8139
Bonjour
J'ai un vieux Dell dimension, et si j'en prend soin d'habitude, au moment de l'orage l'autre jour je n'étais malheureusement pas chez moi. Aussi quand je suis rentré et que j'ai essayé de me connecter comme d'habitude, j'ai vite constaté que ce n'était pas possible. Mais la box marchait toujours avec mon portable à ma grande surprise. Par contre toute connexion était impossible avec le même câble branché au même port de la box. J'ai donc fait le deuil de la carte réseau intégré et me suis résigné à en acheter une nouvelle sur le site le bon coin pour 3 euros. \o/
Elle a l'air détecté normalement, (il la reconnaît comme une realtek 8139 en tous cas), mais je n'ai pas encore réussi à me connecter.
Je vous donne le retour de quelques commandes en espérant que vous saurez m'aider.
Merci d'avance
lspci :
penguin3@penguin3-desktop:~$ lspci
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
00:01.0 PCI bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 420] (rev a3)
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (LOM) Ethernet Controller (rev 81)
ifconfig (j'ai essayé ifconfig eth0 et ifconfig eth1 et sudo /etc/init.d/networkmanager restart aussi) :
penguin3@penguin3-desktop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:07:e9:d4:20:2d
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)eth1 Link encap:Ethernet HWaddr 00:50:fc:49:ef:19
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
Interruption:22 Adresse de base:0xec00lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:4 erreurs:0 :0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:240 (240.0 B) Octets transmis:240 (240.0 B)
sudo dhclient3 :
penguin3@penguin3-desktop:~$ sudo dhclient3
Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/Listening on LPF/eth1/00:50:fc:49:ef:19
Sending on LPF/eth1/00:50:fc:49:ef:19
Listening on LPF/eth0/00:07:e9:d4:20:2d
Sending on LPF/eth0/00:07:e9:d4:20:2d
Sending on Socket/fallback
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 1
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
sudo lshw -C network :
penguin3@penguin3-desktop:~$ sudo lshw -C network
[sudo] password for penguin3:
*-network:0
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: 1
bus info: pci@0000:02:01.0
logical name: eth1
version: 10
serial: 00:50:fc:49:ef:19
size: 10MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: bus_master rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=64 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10MB/s
resources: irq:22 ioport:ec00(size=256) memory:fe1ffc00-fe1ffcff memory:30000000-3000ffff(prefetchable)
*-network:1
description: Ethernet interface
product: 82801DB PRO/100 VE (LOM) Ethernet Controller
vendor: Intel Corporation
physical id: 8
bus info: pci@0000:02:08.0
logical name: eth0
version: 81
serial: 00:07:e9:d4:20:2d
size: 10MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half firmware=N/A latency=64 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10MB/s
resources: irq:20 memory:fe1fe000-fe1fefff ioport:e8c0(size=64)
dmesg :
rved, 2121k data, 656k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf0775000 - 0xff7fe000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xeff75000 ( 767 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590663 - 0xc07a2e48 (2121 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590663 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2391.876 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4783.75 BogoMIPS (lpj=9567504)
[ 0.004030] Security Framework initialized
[ 0.004059] AppArmor: AppArmor initialized
[ 0.004071] Mount-cache hash table entries: 512
[ 0.004264] Initializing cgroup subsys ns
[ 0.004271] Initializing cgroup subsys cpuacct
[ 0.004278] Initializing cgroup subsys memory
[ 0.004289] Initializing cgroup subsys devices
[ 0.004293] Initializing cgroup subsys freezer
[ 0.004297] Initializing cgroup subsys net_cls
[ 0.004329] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004334] CPU: L2 cache: 512K
[ 0.004337] CPU: Hyper-Threading is disabled
[ 0.004343] mce: CPU supports 4 MCE banks
[ 0.004357] CPU0: Thermal monitoring enabled (TM1)
[ 0.004370] Performance Events: no PMU driver, software events only.
[ 0.004379] Checking 'hlt' instruction... OK.
[ 0.021062] SMP alternatives: switching to UP code
[ 0.033860] ACPI: Core revision 20090903
[ 0.069720] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.069733] ftrace: allocating 21771 entries in 43 pages
[ 0.072124] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.072429] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.115159] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
[ 0.116001] Brought up 1 CPUs
[ 0.116001] Total of 1 processors activated (4783.75 BogoMIPS).
[ 0.116001] CPU0 attaching NULL sched-domain.
[ 0.116001] devtmpfs: initialized
[ 0.116001] regulator: core version 0.5
[ 0.116001] Time: 18:45:27 Date: 06/10/10
[ 0.116001] NET: Registered protocol family 16
[ 0.116001] EISA bus registered
[ 0.116001] ACPI: bus type pci registered
[ 0.139407] PCI: PCI BIOS revision 2.10 entry at 0xfbe6d, last bus=2
[ 0.139411] PCI: Using configuration type 1 for base access
[ 0.140770] bio: create slab <bio-0> at 0
[ 0.141290] ACPI: EC: Look up EC in DSDT
[ 0.166518] ACPI: Interpreter enabled
[ 0.166534] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.166565] ACPI: Using IOAPIC for interrupt routing
[ 0.187876] ACPI: No dock devices found.
[ 0.187904] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.188045] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.188209] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
[ 0.188270] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
[ 0.188331] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
[ 0.188400] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe300800-0xfe300bff]
[ 0.188464] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.188470] pci 0000:00:1d.7: PME# disabled
[ 0.188528] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 0.188530] * this clock source is slow. If you are sure your timer does not have
[ 0.188532] * this bug, please use "acpi_pm_good" to disable the workaround
[ 0.188579] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 0.188584] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO
[ 0.188612] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.188620] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.188628] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.188635] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.188644] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.188652] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.188709] pci 0000:00:1f.3: reg 20 io port: [0xdc80-0xdc9f]
[ 0.188758] pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff]
[ 0.188766] pci 0000:00:1f.5: reg 14 io port: [0xdc40-0xdc7f]
[ 0.188774] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfe300400-0xfe3005ff]
[ 0.188782] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfe300000-0xfe3000ff]
[ 0.188815] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.188821] pci 0000:00:1f.5: PME# disabled
[ 0.188866] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
[ 0.188873] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xf4000000-0xf7ffffff]
[ 0.188880] pci 0000:01:00.0: reg 18 32bit mmio pref: [0xf3f80000-0xf3ffffff]
[ 0.188897] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x80000000-0x8001ffff]
[ 0.188957] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfdffffff]
[ 0.188962] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.188992] pci 0000:02:01.0: reg 10 io port: [0xec00-0xecff]
[ 0.189000] pci 0000:02:01.0: reg 14 32bit mmio: [0xfe1ffc00-0xfe1ffcff]
[ 0.189026] pci 0000:02:01.0: reg 30 32bit mmio pref: [0xfe200000-0xfe20ffff]
[ 0.189076] pci 0000:02:08.0: reg 10 32bit mmio: [0xfe1fe000-0xfe1fefff]
[ 0.189084] pci 0000:02:08.0: reg 14 io port: [0xe8c0-0xe8ff]
[ 0.189125] pci 0000:02:08.0: supports D1 D2
[ 0.189128] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.189133] pci 0000:02:08.0: PME# disabled
[ 0.189169] pci 0000:00:1e.0: transparent bridge
[ 0.189175] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.189181] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe100000-0xfe2fffff]
[ 0.189197] pci_bus 0000:00: on NUMA node 0
[ 0.189204] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.189544] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.217702] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.218045] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.218385] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 0.218723] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.219063] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.219398] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.219738] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.220085] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 0.220291] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.220297] vgaarb: loaded
[ 0.220483] SCSI subsystem initialized
[ 0.220588] libata version 3.00 loaded.
[ 0.220695] usbcore: registered new interface driver usbfs
[ 0.220713] usbcore: registered new interface driver hub
[ 0.220749] usbcore: registered new device driver usb
[ 0.220929] ACPI: WMI: Mapper loaded
[ 0.220932] PCI: Using ACPI for IRQ routing
[ 0.221118] NetLabel: Initializing
[ 0.221121] NetLabel: domain hash size = 128
[ 0.221123] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.221141] NetLabel: unlabeled traffic allowed by default
[ 0.221191] Switching to clocksource tsc
[ 0.223842] AppArmor: AppArmor Filesystem Enabled
[ 0.223871] pnp: PnP ACPI init
[ 0.223901] ACPI: bus type pnp registered
[ 0.242802] pnp 00:0a: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
[ 0.242808] pnp 00:0a: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
[ 0.243569] pnp: PnP ACPI: found 11 devices
[ 0.243572] ACPI: ACPI bus type pnp unregistered
[ 0.243579] PnPBIOS: Disabled by ACPI PNP
[ 0.243595] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.243601] system 00:00: iomem range 0x100000-0xffffff could not be reserved
[ 0.243606] system 00:00: iomem range 0x1000000-0x2ff74fff could not be reserved
[ 0.243610] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.243614] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 0.243619] system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.243623] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.243627] system 00:00: iomem range 0xffc00000-0xffffffff has been reserved
[ 0.243640] system 00:0a: ioport range 0xc00-0xc7f has been reserved
[ 0.278443] pci 0000:01:00.0: BAR 6: no parent found for of device [0x80000000-0x8001ffff]
[ 0.278450] pci 0000:02:01.0: BAR 6: address space collision on of device [0xfe200000-0xfe20ffff]
[ 0.278475] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.278478] pci 0000:00:01.0: IO window: disabled
[ 0.278484] pci 0000:00:01.0: MEM window: 0xfc000000-0xfdffffff
[ 0.278490] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xf7ffffff
[ 0.278499] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.278503] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.278510] pci 0000:00:1e.0: MEM window: 0xfe100000-0xfe2fffff
[ 0.278515] pci 0000:00:1e.0: PREFETCH window: 0x30000000-0x300fffff
[ 0.278536] pci 0000:00:1e.0: setting latency timer to 64
[ 0.278542] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.278546] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.278550] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfdffffff]
[ 0.278554] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff]
[ 0.278558] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 0.278561] pci_bus 0000:02: resource 1 mem: [0xfe100000-0xfe2fffff]
[ 0.278565] pci_bus 0000:02: resource 2 pref mem [0x30000000-0x300fffff]
[ 0.278568] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.278572] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.278624] NET: Registered protocol family 2
[ 0.278784] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.279309] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.280434] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.281176] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.281181] TCP reno registered
[ 0.281404] NET: Registered protocol family 1
[ 0.281536] pci 0000:01:00.0: Boot video device
[ 0.281551] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.281702] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
[ 0.281706] Simple Boot Flag at 0x7a set to 0x1
[ 0.281831] cpufreq-nforce2: No nForce2 chipset.
[ 0.281877] Scanning for low memory corruption every 60 seconds
[ 0.282039] audit: initializing netlink socket (disabled)
[ 0.282056] type=2000 audit(1276195527.278:1): initialized
[ 0.291778] Trying to unpack rootfs image as initramfs...
[ 0.303062] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.310919] VFS: Disk quotas dquot_6.5.2
[ 0.311043] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.311924] fuse init (API version 7.13)
[ 0.312052] msgmni has been set to 1481
[ 0.312357] alg: No test for stdrng (krng)
[ 0.312446] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.312451] io scheduler noop registered
[ 0.312454] io scheduler anticipatory registered
[ 0.312456] io scheduler deadline registered
[ 0.312515] io scheduler cfq registered (default)
[ 0.312668] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.312702] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.312828] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.312840] ACPI: Power Button [VBTN]
[ 0.312909] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.312914] ACPI: Power Button [PWRF]
[ 0.313180] processor LNXCPU:00: registered as cooling_device0
[ 0.339121] isapnp: Scanning for PnP cards...
[ 0.346674] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.346811] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.347273] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.348687] brd: module loaded
[ 0.349340] loop: module loaded
[ 0.349478] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.349628] ata_piix 0000:00:1f.1: version 2.13
[ 0.349645] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 0.349659] alloc irq_desc for 18 on node -1
[ 0.349662] alloc kstat_irqs on node -1
[ 0.349672] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.349746] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.398596] scsi0 : ata_piix
[ 0.398799] scsi1 : ata_piix
[ 0.398849] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.398854] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.399382] Fixed MDIO Bus: probed
[ 0.399435] PPP generic driver version 2.4.2
[ 0.399542] tun: Universal TUN/TAP device driver, 1.6
[ 0.399546] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.399671] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.399705] alloc irq_desc for 23 on node -1
[ 0.399709] alloc kstat_irqs on node -1
[ 0.399720] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.399742] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.399747] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.399798] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.399838] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.403736] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 0.406975] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe300800
[ 0.426864] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.427062] usb usb1: configuration #1 chosen from 1 choice
[ 0.427112] hub 1-0:1.0: USB hub found
[ 0.427127] hub 1-0:1.0: 6 ports detected
[ 0.427219] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.427242] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.427315] alloc irq_desc for 16 on node -1
[ 0.427319] alloc kstat_irqs on node -1
[ 0.427328] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.427341] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.427346] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.427403] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.427444] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
[ 0.427565] usb usb2: configuration #1 chosen from 1 choice
[ 0.427603] hub 2-0:1.0: USB hub found
[ 0.427617] hub 2-0:1.0: 2 ports detected
[ 0.427674] alloc irq_desc for 19 on node -1
[ 0.427677] alloc kstat_irqs on node -1
[ 0.427684] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.427692] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.427696] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.427739] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.427771] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
[ 0.427900] usb usb3: configuration #1 chosen from 1 choice
[ 0.427938] hub 3-0:1.0: USB hub found
[ 0.427949] hub 3-0:1.0: 2 ports detected
[ 0.428000] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.428009] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.428013] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.428065] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.428098] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 0.428228] usb usb4: configuration #1 chosen from 1 choice
[ 0.428265] hub 4-0:1.0: USB hub found
[ 0.428278] hub 4-0:1.0: 2 ports detected
[ 0.428398] PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
[ 0.428401] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.429196] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.429356] mice: PS/2 mouse device common for all mice
[ 0.432639] rtc_cmos 00:05: RTC can wake from S4
[ 0.432739] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.432767] rtc0: alarms up to one day, 242 bytes nvram
[ 0.432947] device-mapper: uevent: version 1.0.3
[ 0.433125] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.433778] device-mapper: multipath: version 1.1.0 loaded
[ 0.433784] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.435469] EISA: Probing bus 0 at eisa.0
[ 0.435510] EISA: Detected 0 cards.
[ 0.438459] cpuidle: using governor ladder
[ 0.438464] cpuidle: using governor menu
[ 0.439183] TCP cubic registered
[ 0.439363] NET: Registered protocol family 10
[ 0.439998] lo: Disabled Privacy Extensions
[ 0.440408] NET: Registered protocol family 17
[ 0.440495] Using IPI No-Shortcut mode
[ 0.440645] PM: Resume from disk failed.
[ 0.440672] registered taskstats version 1
[ 0.440929] Magic number: 14:894:796
[ 0.441021] rtc_cmos 00:05: setting system clock to 2010-06-10 18:45:27 UTC (1276195527)
[ 0.441025] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.441028] EDD information not available.
[ 0.451028] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.603967] ata2.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.03, max UDMA/66
[ 0.604020] ata2.01: ATAPI: TSSTcorpDVD-ROM TS-H352A, TS01, max UDMA/33
[ 0.604057] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 0.605275] ata1.00: ATA-5: WDC WD400BB-00DEA0, 05.03E05, max UDMA/100
[ 0.605280] ata1.00: 78165360 sectors, multi 8: LBA
[ 0.605912] ata1.01: ATA-7: Maxtor 6Y160P0, YAR41BW0, max UDMA/133
[ 0.605917] ata1.01: 320173056 sectors, multi 8: LBA48
[ 0.619276] ata2.00: configured for UDMA/33
[ 0.619779] ata2.01: configured for UDMA/33
[ 0.621010] ata1.00: configured for UDMA/100
[ 0.628089] ata1.01: configured for UDMA/100
[ 0.766443] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 0.889904] Freeing initrd memory: 7778k freed
[ 0.989758] isapnp: No Plug & Play device found
[ 0.989997] scsi 0:0:0:0: Direct-Access ATA WDC WD400BB-00DE 05.0 PQ: 0 ANSI: 5
[ 0.990262] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.990430] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 0.990500] sd 0:0:0:0: [sda] Write Protect is off
[ 0.990504] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.990540] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.990747] sda: sda1 sda2 <
[ 0.998607] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y160P0 YAR4 PQ: 0 ANSI: 5
[ 0.998791] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 1.000624] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.03 PQ: 0 ANSI: 5
[ 1.002884] sr0: scsi3-mmc drive: 125x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.002889] Uniform CD-ROM driver Revision: 3.20
[ 1.003043] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.003123] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 1.003749] scsi 1:0:1:0: CD-ROM TSSTcorp DVD-ROM TS-H352A TS01 PQ: 0 ANSI: 5
[ 1.004223] usb 1-3: configuration #1 chosen from 1 choice
[ 1.005825] sr1: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
[ 1.005948] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 1.006018] sr 1:0:1:0: Attached scsi generic sg3 type 5
[ 1.023072] sda5 > sda3
[ 1.023394] sd 0:0:1:0: [sdb] 320173056 512-byte logical blocks: (163 GB/152 GiB)
[ 1.023464] sd 0:0:1:0: [sdb] Write Protect is off
[ 1.023468] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.023519] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.023696] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.023819] sdb: sdb1 sdb2 sdb3 sdb4
[ 1.030259] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 1.030280] Freeing unused kernel memory: 656k freed
[ 1.031207] Write protecting the kernel text: 4676k
[ 1.031243] Write protecting the kernel read-only data: 1840k
[ 1.061537] udev: starting version 151
[ 1.324340] Floppy drive(s): fd0 is 1.44M
[ 1.338803] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.338843] 8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.342286] FDC 0 is a post-1991 82077
[ 1.365923] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.365930] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.365990] alloc irq_desc for 20 on node -1
[ 1.365994] alloc kstat_irqs on node -1
[ 1.366004] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.389622] e100 0000:02:08.0: PME# disabled
[ 1.389645] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 1.404548] 8139too Fast Ethernet driver 0.9.28
[ 1.405488] e100: eth0: e100_probe: addr 0xfe1fe000, irq 20, MAC addr 00:07:e9:d4:20:2d
[ 1.405532] alloc irq_desc for 22 on node -1
[ 1.405536] alloc kstat_irqs on node -1
[ 1.405546] 8139too 0000:02:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.406787] eth1: RealTek RTL8139 at 0xec00, 00:50:fc:49:ef:19, IRQ 22
[ 1.615855] usb 3-2: configuration #1 chosen from 1 choice
[ 1.643048] usbcore: registered new interface driver hiddev
[ 1.674196] input: PATEN USB/PS2 Combo Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4
[ 1.674512] generic-usb 0003:1020:0206.0001: input,hidraw0: USB HID v1.10 Mouse [PATEN USB/PS2 Combo Receiver] on usb-0000:00:1d.1-2/input0
[ 1.674556] usbcore: registered new interface driver usbhid
[ 1.674719] usbhid: v2.6:USB HID core driver
[ 1.769969] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 1.769976] EXT4-fs (sda1): write access will be enabled during recovery
[ 2.363844] EXT4-fs (sda1): recovery complete
[ 2.364161] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 23.001153] udev: starting version 151
[ 23.007982] Adding 1646620k swap on /dev/sda5. Priority:-1 extents:1 across:1646620k
[ 23.137919] lp: driver loaded but no devices found
[ 23.222621] intel_rng: Firmware space is locked read-only. If you can't or
[ 23.222624] intel_rng: don't want to disable this in firmware setup, and if
[ 23.222626] intel_rng: you are certain that your system has a functional
[ 23.222628] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 23.222947] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.420847] Linux agpgart interface v0.103
[ 23.541832] parport_pc 00:09: reported by Plug and Play ACPI
[ 23.541887] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 23.632303] lp0: using parport0 (interrupt-driven).
[ 23.686004] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 23.703437] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 23.713135] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 23.784105] nvidia: module license 'NVIDIA' taints kernel.
[ 23.784111] Disabling lock debugging due to kernel taint
[ 24.049573] type=1505 audit(1276188351.106:2): operation="profile_load" pid=473 name="/sbin/dhclient3"
[ 24.050216] type=1505 audit(1276188351.106:3): operation="profile_load" pid=473 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 24.050564] type=1505 audit(1276188351.106:4): operation="profile_load" pid=473 name="/usr/lib/connman/scripts/dhclient-script"
[ 24.166694] ppdev: user-space parallel port driver
[ 24.444123] dell-wmi: No known WMI GUID found
[ 24.484619] dib0700: loaded with support for 13 different device-types
[ 24.487293] dvb-usb: found a 'Yuan PD378S' in cold state, will try to load a firmware
[ 24.487304] usb 1-3: firmware: requesting dvb-usb-dib0700-1.20.fw
[ 24.639875] alloc irq_desc for 17 on node -1
[ 24.639880] alloc kstat_irqs on node -1
[ 24.639891] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 24.639939] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 24.639995] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 24.640037] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 24.641528] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.17 Thu Apr 15 05:28:41 PDT 2010
[ 24.676194] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 24.892280] dib0700: firmware started successfully.
[ 25.012025] intel8x0_measure_ac97_clock: measured 54063 usecs (2605 samples)
[ 25.012031] intel8x0: clocking to 48000
[ 25.396034] dvb-usb: found a 'Yuan PD378S' in warm state.
[ 25.396135] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 25.397536] DVB: registering new adapter (Yuan PD378S)
[ 25.607337] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[ 25.822808] DiB0070: successfully identified
[ 25.822941] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/input/input5
[ 25.823034] dvb-usb: schedule remote query interval to 50 msecs.
[ 25.823040] dvb-usb: Yuan PD378S successfully initialized and connected.
[ 25.823813] usbcore: registered new interface driver dvb_usb_dib0700
[ 27.368021] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 27.501868] usb 1-6: configuration #1 chosen from 1 choice
[ 27.557649] Initializing USB Mass Storage driver...
[ 27.557823] scsi2 : SCSI emulation for USB Mass Storage devices
[ 27.558074] usbcore: registered new interface driver usb-storage
[ 27.558079] USB Mass Storage support registered.
[ 27.561378] usb-storage: device found at 4
[ 27.561383] usb-storage: waiting for device to settle before scanning
[ 32.560176] usb-storage: device scan complete
[ 32.560781] scsi 2:0:0:0: Direct-Access WD 1600BEV External 1.75 PQ: 0 ANSI: 4
[ 32.563501] sd 2:0:0:0: Attached scsi generic sg4 type 0
[ 32.564272] sd 2:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 32.564772] sd 2:0:0:0: [sdc] Write Protect is off
[ 32.564779] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 32.564782] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 32.566010] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 32.566022] sdc: sdc1
[ 32.614269] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 32.614277] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 38.907554] type=1505 audit(1276188365.962:5): operation="profile_load" pid=708 name="/usr/share/gdm/guest-session/Xsession"
[ 38.923591] type=1505 audit(1276188365.978:6): operation="profile_replace" pid=712 name="/sbin/dhclient3"
[ 38.935914] type=1505 audit(1276188365.990:7): operation="profile_replace" pid=712 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 38.936389] type=1505 audit(1276188365.994:8): operation="profile_replace" pid=712 name="/usr/lib/connman/scripts/dhclient-script"
[ 38.972080] type=1505 audit(1276188366.030:9): operation="profile_load" pid=715 name="/usr/bin/evince"
[ 39.011173] type=1505 audit(1276188366.066:10): operation="profile_load" pid=715 name="/usr/bin/evince-previewer"
[ 39.029313] eth1: link down
[ 39.029694] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 39.047394] type=1505 audit(1276188366.102:11): operation="profile_load" pid=715 name="/usr/bin/evince-thumbnailer"
[ 39.085476] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 39.094416] type=1505 audit(1276188366.150:12): operation="profile_load" pid=782 name="/usr/lib/cups/backend/cups-pdf"
[ 39.095191] type=1505 audit(1276188366.150:13): operation="profile_load" pid=782 name="/usr/sbin/cupsd"
[ 39.119985] type=1505 audit(1276188366.174:14): operation="profile_load" pid=785 name="/usr/sbin/mysqld-akonadi"
[ 39.622658] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 39.622679] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 39.622719] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode
[ 76.815049] UDF-fs: Partition marked readonly; forcing readonly mount
[ 76.863108] UDF-fs INFO UDF: Mounting volume 'SCRUBS', timestamp 2005/11/08 18:29 (1078)
[ 85.614652] end_request: I/O error, dev fd0, sector 0
[ 123.922404] end_request: I/O error, dev fd0, sector 0
lsmod :
penguin3@penguin3-desktop:~$ lsmod
Module Size Used by
binfmt_misc 6587 1
usb_storage 39425 1
snd_intel8x0 25588 2
snd_ac97_codec 100646 1 snd_intel8x0
ac97_bus 1002 1 snd_ac97_codec
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70662 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 1338 0
snd_seq_oss 26726 0
snd_seq_midi 4557 0
snd_rawmidi 19056 1 snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 19098 2 snd_pcm,snd_seq
snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
dvb_usb_dib0700 48031 0
dib7000p 15988 2 dvb_usb_dib0700
dib7000m 13943 1 dvb_usb_dib0700
dib0070 7653 2 dvb_usb_dib0700
dell_wmi 1793 0
dvb_usb 14457 1 dvb_usb_dib0700
dib3000mc 11197 1 dvb_usb_dib0700
dib8000 24119 1 dvb_usb_dib0700
dibx000_common 2974 4 dib7000p,dib7000m,dib3000mc,dib8000
ppdev 5259 0
nvidia 4701243 32
dcdbas 5422 0
snd 54148 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
intel_agp 24177 1
dvb_core 86142 3 dib7000p,dvb_usb,dib8000
parport_pc 25962 1
soundcore 6620 1 snd
snd_page_alloc 7076 2 snd_intel8x0,snd_pcm
agpgart 31724 2 nvidia,intel_agp
shpchp 28820 0
lp 7028 0
parport 32635 3 ppdev,parport_pc,lp
usbhid 36110 0
hid 67032 1 usbhid
8139too 18545 0
e100 28211 0
8139cp 16186 0
mii 4381 3 8139too,e100,8139cp
floppy 53016 1
Dernière modification par Slystone (Le 11/07/2010, à 00:12)
«Rigid, the skeleton of habit alone upholds the human frame.» - Virginia Woolf.
Hors ligne
#2 Le 10/06/2010, à 23:38
- kalisto07
Re : [résolu] Problème de connexion avec une carte pci realtek 8139
il y a un teste facile a faire
demarrer sur un live cd, si la connexion marche pas l'interface reseau est torché
dans la mesure ou tu a verifié le cable et la prise femelle coté routeur
Dernière modification par kalisto07 (Le 10/06/2010, à 23:39)
Hors ligne
#3 Le 12/06/2010, à 09:15
- Slystone
Re : [résolu] Problème de connexion avec une carte pci realtek 8139
Merci kalisto07. 
C'est une très bonne idée, je ne suis pas chez moi ce weekend mais j'essaye ça lundi.
Bon weekend
«Rigid, the skeleton of habit alone upholds the human frame.» - Virginia Woolf.
Hors ligne
#4 Le 11/07/2010, à 00:13
- Slystone
Re : [résolu] Problème de connexion avec une carte pci realtek 8139
Merci Kalisto07, je répond super tard, je n'ai pas pu faire de manip avant. Finalement un pote m'a passé une autre carte réseau, et ça marche finalement. Problème résolu donc. 
«Rigid, the skeleton of habit alone upholds the human frame.» - Virginia Woolf.
Hors ligne