#1 Le 30/06/2006, à 00:45
- Toinou75009
Problème XGL/COMPIZ et driver ati pour une Mobility FireGl v3200
Bonjour,
je fais ma grande entrée dans UBUNTU,
j'ai installé les dernier drivers ati en date, voici se que me donne différente commande:
antoine@antoine-laptop:~$ glxinfo | grep render direct rendering: No
GLX_ATI_render_texture
OpenGL renderer string: Mesa GLX Indirect
antoine@antoine-laptop:~$ fgl_glxgears Using GLX_SGIX_pbuffer
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 143 (GLX)
Minor opcode of failed request: 5 (X_GLXMakeCurrent)
Serial number of failed request: 32
Current serial number in output stream: 32
antoine@antoine-laptop:~$ fglrxinfo display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.4.1)
Donc déjà sa me donne des trucs bizarre, quels suggestions me donneriez vous?
Je précise que j'ai respecté à la lettre les tutos, et quand je lance ma session xgl/compiz, déja j'ai des artefacts en diagonale, et je n'ai plus les bordures des fenetres (sa doit etre compiz qui merde), et enfin j'ai le message qui s'affiche:
driver does not provide the fireGl extensions!
Panel components will operate only partially.
Merci d'avance pour votre précieuse aide,
@+
Antoine
Hors ligne
#2 Le 30/06/2006, à 13:33
- lee-nux
Re : Problème XGL/COMPIZ et driver ati pour une Mobility FireGl v3200
salut!
tu as mal, install tes drivers ati
1-je te conseil en premier lieu de sauvegarder ton xorg.conf dans ton home
2-c'est plutot facile en fait va dans help ubuntu tu tapes ati dans ta recherches et tu tombes sur comment mettre de l'open gl tout y est expliquer.:D
Hors ligne
#3 Le 30/06/2006, à 17:14
- Toinou75009
Re : Problème XGL/COMPIZ et driver ati pour une Mobility FireGl v3200
J'ai regardé et j'ai rien trouvé sur l'open gl
voici un copier coller de mon fichier xorg.conf ou cas ou:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorgSection "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSectionSection "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSectionSection "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSectionSection "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSectionSection "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSectionSection "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSectionSection "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSectionSection "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSectionSection "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSectionSection "Monitor"
Identifier "Écran générique"
Option "DPMS"
EndSectionSection "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSectionSection "Device"
Identifier "ATI Technologies, Inc. M24 1T [FireGL M24 GL]"
Driver "ati"
BusID "PCI:1:0:0"
EndSectionSection "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
EndSectionSection "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. M24 1T [FireGL M24 GL]"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 4
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 8
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 15
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 16
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 24
Modes "1400x1050"
EndSubSection
EndSectionSection "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSectionSection "DRI"
Mode 0666
EndSection
Hors ligne