Pages : 1
#1 Le 17/09/2010, à 17:49
- DMarc
samsung Q2 à formater (résolu)
Bonjour,
J'ai récupéré un lecteur MP3 samsung Q2 dont l'écran est cassé. J'aimerais m'en servir comme d'une bête clé USB, et pour se faire, j'aimerais la formater. Il y a une partition (à mon avis) sur la clé qui fait qu'elle apparait avec son nom, comme un lecteur audio. GParted ne la voit pas, je me sens impuissant devant ce blocage proprio...pénible. "sudo fdisk -l" ne liste pas le volume non plus.
Kika une id ?
Merci d'avance.
Dernière modification par DMarc (Le 19/09/2010, à 09:34)
Il n'y a que les imbéciles qui ne changent pas d'avis, la preuve, Ubuntu installé et même pas peur !
Hors ligne
#2 Le 17/09/2010, à 18:18
- Darunia
Re : samsung Q2 à formater (résolu)
Salut,
Fait un lsusb deja pour voir si le truc est bien reconnu en tant que peripherique USB.
lsusbA+
Hors ligne
#3 Le 17/09/2010, à 18:32
- DMarc
Re : samsung Q2 à formater (résolu)
Voui:
desktop:~$ lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 045e:008c Microsoft Corp. Wireless Intellimouse Explorer 2.0
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 04e8:511d Samsung Electronics Co., Ltd
Bus 001 Device 005: ID 090c:1000 Feiya Technology Corp. Flash Drive
Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 003: ID 1058:1100 Western Digital Technologies, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
On le voit en n° 5
Il n'y a que les imbéciles qui ne changent pas d'avis, la preuve, Ubuntu installé et même pas peur !
Hors ligne
#4 Le 17/09/2010, à 18:44
- Darunia
Re : samsung Q2 à formater (résolu)
Apres l'avoir branché, verifie le log dmesg
dmesgHors ligne
#5 Le 17/09/2010, à 19:36
- DMarc
Re : samsung Q2 à formater (résolu)
ça donne ça:
[ 0.000000] #43 [0001d2c000 - 0001d34000] BOOTMEM
[ 0.000000] Memory: 1266456k/1309888k available (5708k kernel code, 452k absent, 42980k reserved, 5382k data, 908k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:512
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 13107200 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[ 0.000000] Detected 2992.531 MHz processor.
[ 0.020025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.06 BogoMIPS (lpj=29925310)
[ 0.020033] pid_max: default: 32768 minimum: 301
[ 0.020095] Security Framework initialized
[ 0.020144] AppArmor: AppArmor initialized
[ 0.020147] Yama: becoming mindful.
[ 0.021152] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.032655] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.034119] Mount-cache hash table entries: 256
[ 0.034478] Initializing cgroup subsys ns
[ 0.034489] Initializing cgroup subsys cpuacct
[ 0.034499] Initializing cgroup subsys memory
[ 0.034522] Initializing cgroup subsys devices
[ 0.034527] Initializing cgroup subsys freezer
[ 0.034531] Initializing cgroup subsys net_cls
[ 0.034602] CPU: Physical Processor ID: 0
[ 0.034605] CPU: Processor Core ID: 0
[ 0.034609] mce: CPU supports 4 MCE banks
[ 0.034631] CPU0: Thermal monitoring enabled (TM1)
[ 0.034644] using mwait in idle threads.
[ 0.034647] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.034659] ... version: 0
[ 0.034661] ... bit width: 40
[ 0.034664] ... generic registers: 18
[ 0.034666] ... value mask: 000000ffffffffff
[ 0.034669] ... max period: 0000007fffffffff
[ 0.034671] ... fixed-purpose events: 0
[ 0.034673] ... event mask: 000000000003ffff
[ 0.038244] ACPI: Core revision 20100428
[ 0.045776] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.045786] ftrace: allocating 22680 entries in 89 pages
[ 0.050153] Setting APIC routing to flat
[ 0.050432] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.151395] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[ 0.160000] Booting Node 0, Processors #1 Ok.
[ 0.320043] Brought up 2 CPUs
[ 0.320052] Total of 2 processors activated (11970.70 BogoMIPS).
[ 0.320552] devtmpfs: initialized
[ 0.321108] regulator: core version 0.5
[ 0.321141] Time: 15:02:40 Date: 09/17/10
[ 0.321201] NET: Registered protocol family 16
[ 0.321221] Trying to unpack rootfs image as initramfs...
[ 0.321488] ACPI: bus type pci registered
[ 0.321601] PCI: Using configuration type 1 for base access
[ 0.323502] bio: create slab <bio-0> at 0
[ 0.325686] ACPI: EC: Look up EC in DSDT
[ 0.327879] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.341493] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff88004e32baa0), AE_INVALID_TABLE_LENGTH
[ 0.341667] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff88004e32bb60), AE_INVALID_TABLE_LENGTH
[ 0.341719] ACPI: Interpreter enabled
[ 0.341725] ACPI: (supports S0 S3 S4 S5)
[ 0.341767] ACPI: Using IOAPIC for interrupt routing
[ 0.357589] ACPI Warning: Incorrect checksum in table [OEMB] - 0xE7, should be 0xE0 (20100428/tbutils-314)
[ 0.357805] ACPI: No dock devices found.
[ 0.357813] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.358128] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.358651] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.358657] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.358663] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.358668] pci_root PNP0A03:00: host bridge window [mem 0x50000000-0xffffffff] (ignored)
[ 0.358706] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff]
[ 0.358938] pci 0000:00:02.5: reg 10: [io 0x0000-0x0007]
[ 0.358949] pci 0000:00:02.5: reg 14: [io 0x0000-0x0003]
[ 0.358958] pci 0000:00:02.5: reg 18: [io 0x0000-0x0007]
[ 0.358968] pci 0000:00:02.5: reg 1c: [io 0x0000-0x0003]
[ 0.358977] pci 0000:00:02.5: reg 20: [io 0xffa0-0xffaf]
[ 0.359017] pci 0000:00:02.5: PME# supported from D3cold
[ 0.359031] pci 0000:00:02.5: PME# disabled
[ 0.359089] pci 0000:00:03.0: reg 10: [mem 0xfebf8000-0xfebf8fff]
[ 0.359160] pci 0000:00:03.1: reg 10: [mem 0xfebf9000-0xfebf9fff]
[ 0.359231] pci 0000:00:03.2: reg 10: [mem 0xfebfa000-0xfebfafff]
[ 0.359309] pci 0000:00:03.3: reg 10: [mem 0xfebfb000-0xfebfbfff]
[ 0.359367] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.359374] pci 0000:00:03.3: PME# disabled
[ 0.359423] pci 0000:00:05.0: reg 10: [io 0xeff0-0xeff7]
[ 0.359433] pci 0000:00:05.0: reg 14: [io 0xefe4-0xefe7]
[ 0.359443] pci 0000:00:05.0: reg 18: [io 0xefa8-0xefaf]
[ 0.359453] pci 0000:00:05.0: reg 1c: [io 0xefe0-0xefe3]
[ 0.359462] pci 0000:00:05.0: reg 20: [io 0xef90-0xef9f]
[ 0.359472] pci 0000:00:05.0: reg 24: [io 0xec00-0xec7f]
[ 0.359504] pci 0000:00:05.0: PME# supported from D3cold
[ 0.359511] pci 0000:00:05.0: PME# disabled
[ 0.359568] pci 0000:00:09.0: reg 10: [io 0xe800-0xe8ff]
[ 0.359640] pci 0000:00:09.0: supports D1 D2
[ 0.359684] pci 0000:00:0b.0: reg 10: [io 0xe400-0xe4ff]
[ 0.359695] pci 0000:00:0b.0: reg 14: [mem 0xfebf6800-0xfebf68ff]
[ 0.359728] pci 0000:00:0b.0: reg 30: [mem 0xfeba0000-0xfebbffff pref]
[ 0.359754] pci 0000:00:0b.0: supports D1 D2
[ 0.359759] pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold
[ 0.359766] pci 0000:00:0b.0: PME# disabled
[ 0.359859] pci 0000:01:00.0: reg 10: [mem 0xed000000-0xedffffff]
[ 0.359868] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff pref]
[ 0.359878] pci 0000:01:00.0: reg 18: [mem 0xec000000-0xecffffff]
[ 0.359900] pci 0000:01:00.0: reg 30: [mem 0xeeae0000-0xeeafffff pref]
[ 0.360037] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.360046] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.360054] pci 0000:00:01.0: bridge window [mem 0xeaa00000-0xeeafffff]
[ 0.360064] pci 0000:00:01.0: bridge window [mem 0xca900000-0xea8fffff pref]
[ 0.360084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.371287] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.371519] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.371739] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.371942] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.372165] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.372370] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.372574] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.372786] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.372879] HEST: Table is not found!
[ 0.373112] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.373119] vgaarb: loaded
[ 0.373485] SCSI subsystem initialized
[ 0.373754] libata version 3.00 loaded.
[ 0.373878] usbcore: registered new interface driver usbfs
[ 0.373914] usbcore: registered new interface driver hub
[ 0.373979] usbcore: registered new device driver usb
[ 0.374280] ACPI: WMI: Mapper loaded
[ 0.374286] PCI: Using ACPI for IRQ routing
[ 0.374297] PCI: pci_cache_line_size set to 64 bytes
[ 0.374392] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.374399] reserve RAM buffer: 000000004ff30000 - 000000004fffffff
[ 0.374637] NetLabel: Initializing
[ 0.374642] NetLabel: domain hash size = 128
[ 0.374645] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.374680] NetLabel: unlabeled traffic allowed by default
[ 0.374782] Switching to clocksource tsc
[ 0.393352] AppArmor: AppArmor Filesystem Enabled
[ 0.393404] pnp: PnP ACPI init
[ 0.393486] ACPI: bus type pnp registered
[ 0.400952] pnp: PnP ACPI: found 13 devices
[ 0.400960] ACPI: ACPI bus type pnp unregistered
[ 0.401000] system 00:07: [io 0x0290-0x0297] has been reserved
[ 0.401021] system 00:08: [io 0x0480-0x048f] has been reserved
[ 0.401028] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.401033] system 00:08: [io 0x0800-0x08df] has been reserved
[ 0.401039] system 00:08: [io 0x08e0-0x08ff] has been reserved
[ 0.401046] system 00:08: [mem 0xffe80000-0xffefffff] has been reserved
[ 0.401060] system 00:09: [mem 0xfec00000-0xfec0ffff] could not be reserved
[ 0.401066] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.401073] system 00:09: [mem 0xff780000-0xffffffff] could not be reserved
[ 0.401087] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.401095] system 00:0c: [mem 0x000c0000-0x000dffff] has been reserved
[ 0.401103] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.401113] system 00:0c: [mem 0x00100000-0x4ffeffff] could not be reserved
[ 0.409403] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.409420] pci 0000:00:01.0: bridge window [io disabled]
[ 0.409435] pci 0000:00:01.0: bridge window [mem 0xeaa00000-0xeeafffff]
[ 0.409443] pci 0000:00:01.0: bridge window [mem 0xca900000-0xea8fffff pref]
[ 0.409476] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.409482] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.409487] pci_bus 0000:01: resource 1 [mem 0xeaa00000-0xeeafffff]
[ 0.409492] pci_bus 0000:01: resource 2 [mem 0xca900000-0xea8fffff pref]
[ 0.409591] NET: Registered protocol family 2
[ 0.409935] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.412285] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.419221] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.420921] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.420937] TCP reno registered
[ 0.421028] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.421102] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.421448] NET: Registered protocol family 1
[ 0.535181] pci 0000:01:00.0: Boot video device
[ 0.535193] PCI: CLS 64 bytes, default 64
[ 0.535743] Scanning for low memory corruption every 60 seconds
[ 0.536060] audit: initializing netlink socket (disabled)
[ 0.536091] type=2000 audit(1284735760.530:1): initialized
[ 0.555182] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.558220] VFS: Disk quotas dquot_6.5.2
[ 0.558361] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.559824] fuse init (API version 7.14)
[ 0.560032] msgmni has been set to 2473
[ 0.560772] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.560784] io scheduler noop registered
[ 0.560791] io scheduler deadline registered
[ 0.560873] io scheduler cfq registered (default)
[ 0.561117] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.561166] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.561560] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.561574] ACPI: Power Button [PWRB]
[ 0.561671] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.561679] ACPI: Power Button [PWRF]
[ 0.561972] ACPI: acpi_idle registered with cpuidle
[ 0.566808] ERST: Table is not found!
[ 0.567101] Linux agpgart interface v0.103
[ 0.567166] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.567339] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.567466] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.567994] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.568181] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.570562] brd: module loaded
[ 0.571693] loop: module loaded
[ 0.572270] pata_sis 0000:00:02.5: version 0.5.2
[ 0.572312] alloc irq_desc for 16 on node -1
[ 0.572316] alloc kstat_irqs on node -1
[ 0.572338] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.572741] scsi0 : pata_sis
[ 0.572898] scsi1 : pata_sis
[ 0.574423] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.574433] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.574551] alloc irq_desc for 17 on node -1
[ 0.574555] alloc kstat_irqs on node -1
[ 0.574569] pata_acpi 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.574652] pata_acpi 0000:00:05.0: PCI INT A disabled
[ 0.575311] Fixed MDIO Bus: probed
[ 0.575395] PPP generic driver version 2.4.2
[ 0.575544] tun: Universal TUN/TAP device driver, 1.6
[ 0.575548] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.575731] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.575775] alloc irq_desc for 23 on node -1
[ 0.575780] alloc kstat_irqs on node -1
[ 0.575792] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.575833] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 0.575918] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 0.575990] ehci_hcd 0000:00:03.3: cache line size of 64 is not supported
[ 0.576023] ehci_hcd 0000:00:03.3: irq 23, io mem 0xfebfb000
[ 0.595159] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 0.595593] hub 1-0:1.0: USB hub found
[ 0.595606] hub 1-0:1.0: 8 ports detected
[ 0.595822] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.595873] alloc irq_desc for 20 on node -1
[ 0.595878] alloc kstat_irqs on node -1
[ 0.595893] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.595941] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 0.596030] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 0.596086] ohci_hcd 0000:00:03.0: irq 20, io mem 0xfebf8000
[ 0.657534] hub 2-0:1.0: USB hub found
[ 0.657549] hub 2-0:1.0: 3 ports detected
[ 0.657724] alloc irq_desc for 21 on node -1
[ 0.657729] alloc kstat_irqs on node -1
[ 0.657746] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.657792] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 0.657875] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 0.657931] ohci_hcd 0000:00:03.1: irq 21, io mem 0xfebf9000
[ 0.717528] hub 3-0:1.0: USB hub found
[ 0.717546] hub 3-0:1.0: 3 ports detected
[ 0.717727] alloc irq_desc for 22 on node -1
[ 0.717731] alloc kstat_irqs on node -1
[ 0.717748] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.717796] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 0.717899] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
[ 0.717951] ohci_hcd 0000:00:03.2: irq 22, io mem 0xfebfa000
[ 0.735361] ata1.01: NODEV after polling detection
[ 0.755703] ata1.00: ATAPI: PHILIPS DVDR1648P1, P2.4, max UDMA/33
[ 0.770501] Freeing initrd memory: 10748k freed
[ 0.779396] hub 4-0:1.0: USB hub found
[ 0.779453] hub 4-0:1.0: 2 ports detected
[ 0.780175] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.781287] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.781313] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.781859] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.782725] mice: PS/2 mouse device common for all mice
[ 0.783641] rtc_cmos 00:02: RTC can wake from S4
[ 0.784030] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.784142] rtc0: alarms up to one month, 114 bytes nvram
[ 0.785053] device-mapper: uevent: version 1.0.3
[ 0.786042] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.786692] device-mapper: multipath: version 1.1.1 loaded
[ 0.786725] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.788136] cpuidle: using governor ladder
[ 0.788163] cpuidle: using governor menu
[ 0.788831] TCP cubic registered
[ 0.789030] NET: Registered protocol family 10
[ 0.789594] lo: Disabled Privacy Extensions
[ 0.789903] NET: Registered protocol family 17
[ 0.790220] PM: Resume from disk failed.
[ 0.790246] registered taskstats version 1
[ 0.790462] Magic number: 10:846:32
[ 0.790625] rtc_cmos 00:02: setting system clock to 2010-09-17 15:02:41 UTC (1284735761)
[ 0.790630] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.790633] EDD information not available.
[ 0.795710] ata1.00: configured for UDMA/33
[ 0.805120] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.817238] scsi 0:0:0:0: CD-ROM PHILIPS DVDR1648P1 P2.4 PQ: 0 ANSI: 5
[ 0.825314] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 0.825319] Uniform CD-ROM driver Revision: 3.20
[ 0.825480] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.825560] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.975455] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 1.177704] ata2.01: ATAPI: LTN486S, YIS3, max UDMA/33
[ 1.216195] ata2.01: configured for UDMA/33
[ 1.216788] scsi 1:0:1:0: CD-ROM LITEON CD-ROM LTN486S YIS3 PQ: 0 ANSI: 5
[ 1.219659] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 1.219798] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 1.219872] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 1.219950] Freeing unused kernel memory: 908k freed
[ 1.221034] Write protecting the kernel read-only data: 10240k
[ 1.221258] Freeing unused kernel memory: 416k freed
[ 1.221978] Freeing unused kernel memory: 1644k freed
[ 1.246162] usb 1-4: new high speed USB device using ehci_hcd and address 4
[ 1.254708] udev[77]: starting version 162
[ 1.395129] hub 1-4:1.0: USB hub found
[ 1.395678] hub 1-4:1.0: 4 ports detected
[ 1.446825] sata_sis 0000:00:05.0: version 1.0
[ 1.446869] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.446880] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
[ 1.464372] scsi2 : sata_sis
[ 1.493694] scsi3 : sata_sis
[ 1.494801] ata3: SATA max UDMA/133 cmd 0xeff0 ctl 0xefe4 bmdma 0xef90 irq 17
[ 1.494813] ata4: SATA max UDMA/133 cmd 0xefa8 ctl 0xefe0 bmdma 0xef98 irq 17
[ 1.495066] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.495120] alloc irq_desc for 19 on node -1
[ 1.495125] alloc kstat_irqs on node -1
[ 1.495147] r8169 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.495227] r8169 0000:00:0b.0: (unregistered net_device): no PCI Express capability
[ 1.496360] r8169 0000:00:0b.0: eth0: RTL8110s at 0xffffc900008ce800, 00:18:f3:ed:d3:05, XID 04000000 IRQ 19
[ 1.512737] usb 1-7: new high speed USB device using ehci_hcd and address 5
[ 1.526802] Initializing USB Mass Storage driver...
[ 1.534577] scsi4 : usb-storage 1-2:1.0
[ 1.534916] usbcore: registered new interface driver usb-storage
[ 1.534921] USB Mass Storage support registered.
[ 1.662578] scsi5 : usb-storage 1-7:1.0
[ 1.842570] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.903157] ata3.00: ATA-7: ST3808110AS, 3.AAE, max UDMA/133
[ 1.903164] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.994801] ata3.00: configured for UDMA/133
[ 1.995000] scsi 2:0:0:0: Direct-Access ATA ST3808110AS 3.AA PQ: 0 ANSI: 5
[ 1.995324] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.995368] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.995452] sd 2:0:0:0: [sda] Write Protect is off
[ 1.995458] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.995539] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.995885] sda:
[ 2.000054] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 2.034473] sda2 < sda5 sda6 sda7 > sda3
[ 2.090048] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.342564] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.389392] ata4.00: ATA-7: MAXTOR STM380815AS, 4.AAB, max UDMA/133
[ 2.389396] ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.472698] ata4.00: configured for UDMA/133
[ 2.472901] scsi 3:0:0:0: Direct-Access ATA MAXTOR STM380815 4.AA PQ: 0 ANSI: 5
[ 2.473191] sd 3:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.473256] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 2.473315] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.473322] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.473398] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.473743] sdb: sdb1
[ 2.521188] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.536945] usbcore: registered new interface driver hiddev
[ 2.542752] scsi 4:0:0:0: Direct-Access WD 6400AAV External 1.65 PQ: 0 ANSI: 4
[ 2.544359] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 2.544678] sd 4:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 2.546827] sd 4:0:0:0: [sdc] Write Protect is off
[ 2.546839] sd 4:0:0:0: [sdc] Mode Sense: 21 00 00 00
[ 2.546846] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 2.548399] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 2.548416] sdc:
[ 2.552743] input: Microsoft Microsoft Wireless Optical Mouse® 1.0A as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/input/input3
[ 2.553056] generic-usb 0003:045E:008C.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:03.0-1/input0
[ 2.553119] usbcore: registered new interface driver usbhid
[ 2.553124] usbhid: USB HID core driver
[ 2.671175] scsi 5:0:0:0: Direct-Access USB DISK Pro 1100 PQ: 0 ANSI: 0 CCS
[ 2.672245] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 2.674663] sd 5:0:0:0: [sdd] 3963904 512-byte logical blocks: (2.02 GB/1.88 GiB)
[ 2.675524] sd 5:0:0:0: [sdd] Write Protect is off
[ 2.675529] sd 5:0:0:0: [sdd] Mode Sense: 43 00 00 00
[ 2.675533] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2.678522] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2.678535] sdd: sdd1
[ 2.682399] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2.682408] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[ 3.008930] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 3.130391] sdc1
[ 3.132396] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 3.132404] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 6.243544] Adding 819276k swap on /dev/sda6. Priority:-1 extents:1 across:819276k
[ 6.310289] udev[317]: starting version 162
[ 6.383109] agpgart-sis 0000:00:00.0: SiS chipset [1039/0661]
[ 6.473863] lp: driver loaded but no devices found
[ 6.583359] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 6.583472] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.675820] parport_pc 00:06: reported by Plug and Play ACPI
[ 6.675947] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 6.820579] lp0: using parport0 (interrupt-driven).
[ 6.882748] type=1400 audit(1284735767.580:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=460 comm="apparmor_parser"
[ 6.883629] type=1400 audit(1284735767.580:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=460 comm="apparmor_parser"
[ 6.884106] type=1400 audit(1284735767.580:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=460 comm="apparmor_parser"
[ 7.156805] ppdev: user-space parallel port driver
[ 7.198120] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 7.390424] nvidia: module license 'NVIDIA' taints kernel.
[ 7.390435] Disabling lock debugging due to kernel taint
[ 7.504182] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 7.599959] C-Media PCI 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.556863] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.556884] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.557510] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 256.53 Fri Aug 27 20:27:48 PDT 2010
[ 16.974723] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 17.057154] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 20.003845] type=1400 audit(1284735780.710:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=788 comm="apparmor_parser"
[ 20.012188] type=1400 audit(1284735780.710:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=789 comm="apparmor_parser"
[ 20.013054] type=1400 audit(1284735780.720:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=789 comm="apparmor_parser"
[ 20.013526] type=1400 audit(1284735780.720:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=789 comm="apparmor_parser"
[ 20.034947] type=1400 audit(1284735780.740:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=792 comm="apparmor_parser"
[ 20.061564] type=1400 audit(1284735780.760:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=800 comm="apparmor_parser"
[ 20.062652] type=1400 audit(1284735780.770:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=800 comm="apparmor_parser"
[ 20.091453] type=1400 audit(1284735780.790:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=806 comm="apparmor_parser"
[ 20.092138] type=1400 audit(1284735780.790:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=792 comm="apparmor_parser"
[ 20.138173] type=1400 audit(1284735780.840:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=792 comm="apparmor_parser"
[ 20.160122] r8169 0000:00:0b.0: eth0: link up
[ 20.815202] agpgart-sis 0000:00:00.0: AGP 3.5 bridge
[ 20.815246] agpgart-sis 0000:00:00.0: putting AGP V3 device into 8x mode
[ 20.816249] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[ 21.933626] input: btnx keyboard as /devices/virtual/input/input4
[ 21.936013] input: btnx mouse as /devices/virtual/input/input5
[ 23.037471] ata3.00: configured for UDMA/133
[ 23.037484] ata3: EH complete
[ 23.581649] ata4.00: configured for UDMA/133
[ 23.581664] ata4: EH complete
[ 24.382568] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[ 24.663690] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[ 24.942606] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[ 25.222676] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[ 27.403884] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 28.442670] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 28.577676] EXT4-fs (sda7): re-mounted. Opts: commit=0
[ 30.113896] EXT4-fs (sdb1): re-mounted. Opts: commit=0
[ 30.750044] eth0: no IPv6 routers present
[ 1118.632581] usb 1-8: new high speed USB device using ehci_hcd and address 6
[ 1182.443092] lo: Disabled Privacy Extensions
[ 3470.746970] lo: Disabled Privacy Extensions
[ 3823.524909] lo: Disabled Privacy Extensions
[ 5209.988717] lo: Disabled Privacy Extensions
[ 6551.863830] lo: Disabled Privacy Extensions
[ 6684.476673] lo: Disabled Privacy Extensions
marc@marc-desktop:~$Il n'y a que les imbéciles qui ne changent pas d'avis, la preuve, Ubuntu installé et même pas peur !
Hors ligne
#6 Le 19/09/2010, à 03:41
- AlexandreP
Re : samsung Q2 à formater (résolu)
Le Q2 de Samsung est un baladeur qui a une connexion par protocole MTP avec ton système d'exploitation. MTP est un protocole conçu spécialement pour les périphériques multimédias. Il s'oppose au protocole MSC, utilisé par tous les périphériques de stockages de masse (comme une clé USB).
GParted ne peut pas formater ton baladeur car ton baladeur (protocole MTP) n'est pas reconnu comme une clé USB (protocole MSC).
Plusieurs baladeurs de marque Samsung permettent de configurer avec quel protocole (MTP ou MSC) le baladeur doit se connecter à l'ordinateur; il semble que ce soit le cas du Q2. Vérifie cette possibilité dans les options avancées de ton baladeur (ou lis le manuel de ton baladeur, ou demande de l'aide chez GénérationMP3, spécialisée dans les baladeurs). Tant que ton baladeur ne se connectera pas en mode MSC à ton ordinateur, alors GParted ne pourra pas le formater.
«La capacité d'apprendre est un don; La faculté d'apprendre est un talent; La volonté d'apprendre est un choix.» -Frank Herbert
93,8% des gens sont capables d'inventer des statistiques sans fournir d'études à l'appui.
Hors ligne
#7 Le 19/09/2010, à 09:34
- DMarc
Re : samsung Q2 à formater (résolu)
Bravo et merci à AlexandreP. J'ai trouvé le manuel du Q2 sur le site samsung et en tâtonnant (et oui, un écran HS c'est pas facile) et à l'oreille, j'ai fait passer le lecteur de MTP à MSC. Et ça marche !
Encore une fois bravo !
Ca me fait une clé USB de 8 GO, c'est pas mal...
Il n'y a que les imbéciles qui ne changent pas d'avis, la preuve, Ubuntu installé et même pas peur !
Hors ligne
Pages : 1