Ubuntu-fr

Zyx

[Résolu] Toujours pas d'accélération 3D...

Bonjour tout le monde:)
Exusez moi de vous embêter avec mon problème :
J'ai une powercolor X800 GT, mais je n'arrive pas à installer les pilotes propriétaires.
Je pense avoir bien suivit les tutoriaux ou la doc. Il doit forcément me manquer quelque chose que je ne vois pas.

Je vous envoie mon /etc/X11/xorg.conf :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	#    Load    "extmod"
    		SubSection "extmod"
        	Option    "omit xfree86-dga"
    		EndSubSection
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbVariant" "latin9"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "DELL E196FP"
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. R423 UK [Radeon X800SE (PCIE)]"
	Driver      "fglrx"
	Option	    "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "off"
	BusID       "PCI:3:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
	Option	    "DesktopSetup" "single"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. R423 UK [Radeon X800SE (PCIE)]"
	Monitor    "DELL E196FP"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Merci  de me répondre:P
Je vous remercie d'avance;)

Dernière modification par Zyx (Le 06/11/2008, à 12:19)

---

Linux, il y a moins bien, mais c'est plus cher.
www.sheebypanda.com

ffomnislash

Re : [Résolu] Toujours pas d'accélération 3D...

fglrxinfo
cat /var/log/Xorg.0.log | grep EE
cat /var/log/Xorg.0.log | grep WW

stp

---

-- Mon blog --

Zyx

Re : [Résolu] Toujours pas d'accélération 3D...

Merci a toi ffomnislash
Alors :

$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.4.1)

$ cat /var/log/Xorg.0.log | grep EE
Current Operating System: Linux antoine-desktop 2.6.15-26-686 #1 SMP PREEMPT Thu Aug 3 03:13:28 UTC 2006 i686
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER
(EE) fglrx(0): Fail to initialize ASIC in kernel.
(EE) fglrx(0): DRIScreenInit failed!
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom

et enfin,

$ cat /var/log/Xorg.0.log | grep WW
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
(WW) fglrx: No matching Device section for instance (BusID PCI:3:0:1) found
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(WW) fglrx(0): Specified desktop setup not supported: 1
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used

Voila ! J'essai de comprendre

---

Linux, il y a moins bien, mais c'est plus cher.
www.sheebypanda.com

Zyx

Re : [Résolu] Toujours pas d'accélération 3D...

Je suis une grosse nouille : En relisant le tutorial, je me suis rendu compte que j'avais oublié d'installer les "linux-restricted-modules-":lol:

Je suis content d'avoir trouvé cette erreur d'inattention tout seul.

30584 frames in 5.0 seconds = 6115.860 FPS

---

Linux, il y a moins bien, mais c'est plus cher.
www.sheebypanda.com