Pages : 1
#1 Le 17/10/2006, à 13:52
- cameleon078
lm_sensors + SNMP
Bonjour,
Je souhaiterais activer lm_sensors au niveau SNMP. Comment faire ?
J'ai bien installé lm_sensors comme dans le tuto, la commande sensors renvoie :
w83697hf-isa-0290
Adapter: ISA adapter
VCore: +1.09 V (min = +1.71 V, max = +1.89 V) ALARM
+3.3V: +3.30 V (min = +3.14 V, max = +3.47 V)
+5V: +5.11 V (min = +4.76 V, max = +5.24 V)
+12V: +11.31 V (min = +10.82 V, max = +13.19 V)
-12V: +4.33 V (min = -13.18 V, max = -10.80 V) ALARM
-5V: +0.38 V (min = -5.25 V, max = -4.75 V) ALARM
V5SB: +5.35 V (min = +4.76 V, max = +5.24 V) ALARM
VBat: +0.26 V (min = +2.40 V, max = +3.60 V) ALARM
fan1: 1562 RPM (min = 2481 RPM, div = 8) ALARM
fan2: 0 RPM (min = 19852 RPM, div = 2) ALARM
temp1: +34°C (high = +6°C, hyst = +28°C) sensor = thermistor ALARM
temp2: +30.5°C (high = +80°C, hyst = +75°C) sensor = thermistor
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm enabled
Mais qd je walk le snmp avec la commande snmpwalk -v1 -c public localhost .1.3.6.1.4.1.2021, rien !
Merci pour votre aide.
Hors ligne
Pages : 1