Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".

#1 Le 09/08/2011, à 23:28

elPacha

[Résolu] Terratec cinergy t Stick RC mkII (clef TNT)

Bonjour à tous,

Voici mon problème, je souhaite faire fonctionner ma clef tnt TERRATEC CINERGY T STICK RC MKII sous ubuntu 11.04

Ma configuration :
         - netbook acer aspire one
         - Ubuntu 11.04
         - clef tnt cité plus haut

En suivant la documentation ubuntu, je suis passé de la version d'ubuntu 10.04 à la version 11.04 afin de pouvoir faire fonctionner nativement ma clef TNT. Hélas ma clef n'est pas reconnu par le contrôleur dvb.
J'ai effectuer un lsusb qui ma bien revoyer :

lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera
Bus 001 Device 002: ID 0ccd:0097 TerraTec Electronic GmbH Cinergy T RC MKII
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

quelqu'un peu t-il m'éclairer s'il vous plait?

Dernière modification par elPacha (Le 02/02/2013, à 04:06)


Merci de ton aide,

el Pacha

Hors ligne

#2 Le 10/08/2011, à 09:01

durthu

Re : [Résolu] Terratec cinergy t Stick RC mkII (clef TNT)

salut,
peux tu renvoyer le résultat de la commande dmesg juste après avoir branché ta clé ?

Hors ligne

#3 Le 10/08/2011, à 23:05

elPacha

Re : [Résolu] Terratec cinergy t Stick RC mkII (clef TNT)

Desole d'avoir mis ci longtemp à repondre, voici ce que me renvoi le terminal pour dmesg :

[    0.540003] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.540254] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.540464] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.540690] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.540900] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.541311] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.541346] vgaarb: loaded
[    0.542156] SCSI subsystem initialized
[    0.542369] libata version 3.00 loaded.
[    0.542553] usbcore: registered new interface driver usbfs
[    0.542602] usbcore: registered new interface driver hub
[    0.542714] usbcore: registered new device driver usb
[    0.544513] wmi: Mapper loaded
[    0.544520] PCI: Using ACPI for IRQ routing
[    0.544530] PCI: pci_cache_line_size set to 64 bytes
[    0.544766] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[    0.544777] reserve RAM buffer: 000000003f576000 - 000000003fffffff
[    0.544788] reserve RAM buffer: 000000003f66d000 - 000000003fffffff
[    0.544798] reserve RAM buffer: 000000003f6ef000 - 000000003fffffff
[    0.544806] reserve RAM buffer: 000000003f700000 - 000000003fffffff
[    0.545164] NetLabel: Initializing
[    0.545171] NetLabel:  domain hash size = 128
[    0.545177] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.545210] NetLabel:  unlabeled traffic allowed by default
[    0.545345] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.545359] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.545374] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.548819] Switching to clocksource hpet
[    0.551120] Switched to NOHz mode on CPU #0
[    0.551179] Switched to NOHz mode on CPU #1
[    0.571074] AppArmor: AppArmor Filesystem Enabled
[    0.571160] pnp: PnP ACPI init
[    0.571224] ACPI: bus type pnp registered
[    0.572517] pnp 00:00: [bus 00-ff]
[    0.572528] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.572537] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.572545] pnp 00:00: [io  0x0d00-0xefff window]
[    0.572554] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.572569] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.572577] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.572586] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.572594] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.572603] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.572611] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.572619] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.572628] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.572636] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.572644] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.572653] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.572661] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.572669] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.572678] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[    0.572880] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.636623] pnp 00:01: [io  0x002e-0x002f]
[    0.636634] pnp 00:01: [io  0x004e-0x004f]
[    0.636642] pnp 00:01: [io  0x0068]
[    0.636649] pnp 00:01: [io  0x006c]
[    0.636656] pnp 00:01: [io  0x0200-0x020f]
[    0.636664] pnp 00:01: [io  0x164e-0x164f]
[    0.636671] pnp 00:01: [io  0x0061]
[    0.636678] pnp 00:01: [io  0x0070]
[    0.636684] pnp 00:01: [io  0x0080]
[    0.636691] pnp 00:01: [io  0x0092]
[    0.636698] pnp 00:01: [io  0x00b2-0x00b3]
[    0.636705] pnp 00:01: [io  0x0063]
[    0.636712] pnp 00:01: [io  0x0065]
[    0.636719] pnp 00:01: [io  0x0067]
[    0.636726] pnp 00:01: [io  0x0600-0x060f]
[    0.636733] pnp 00:01: [io  0x0610]
[    0.636740] pnp 00:01: [io  0x0800-0x080f]
[    0.636747] pnp 00:01: [io  0x0400-0x047f]
[    0.636755] pnp 00:01: [io  0x0500-0x053f]
[    0.636762] pnp 00:01: [io  0xff2c-0xff2f]
[    0.636770] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.636778] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.636786] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.636794] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.636802] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.636810] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[    0.636818] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    0.636884] pnp 00:01: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io  0x1000-0x2fff]
[    0.637118] system 00:01: [io  0x0200-0x020f] has been reserved
[    0.637130] system 00:01: [io  0x0600-0x060f] has been reserved
[    0.637140] system 00:01: [io  0x0610] has been reserved
[    0.637149] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.637159] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.637168] system 00:01: [io  0x0500-0x053f] has been reserved
[    0.637178] system 00:01: [io  0xff2c-0xff2f] has been reserved
[    0.637189] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.637200] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.637210] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.637220] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.637230] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.637241] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.637251] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.637265] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.637309] pnp 00:02: [io  0x0000-0x001f]
[    0.637318] pnp 00:02: [io  0x0081-0x0091]
[    0.637326] pnp 00:02: [io  0x0093-0x009f]
[    0.637334] pnp 00:02: [io  0x00c0-0x00df]
[    0.637343] pnp 00:02: [dma 4]
[    0.637453] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.637556] pnp 00:03: [io  0x0070-0x0077]
[    0.637662] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.637899] pnp 00:04: [irq 0 disabled]
[    0.637925] pnp 00:04: [irq 8]
[    0.637933] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.638040] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.638083] pnp 00:05: [io  0x00f0]
[    0.638099] pnp 00:05: [irq 13]
[    0.638210] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.638256] pnp 00:06: [mem 0xff800000-0xffffffff]
[    0.638373] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[    0.638469] pnp 00:07: [io  0x0060]
[    0.638478] pnp 00:07: [io  0x0064]
[    0.638495] pnp 00:07: [irq 1]
[    0.638607] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.638820] pnp 00:08: [irq 12]
[    0.638940] pnp 00:08: Plug and Play ACPI device, IDs SYN1b1c SYN1b00 SYN0002 PNP0f13 (active)
[    0.639340] pnp: PnP ACPI: found 9 devices
[    0.639348] ACPI: ACPI bus type pnp unregistered
[    0.639357] PnPBIOS: Disabled by ACPI PNP
[    0.681186] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.681201] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.681215] pci 0000:00:1c.0:   bridge window [mem 0x55100000-0x561fffff]
[    0.681228] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.681244] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.681254] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.681267] pci 0000:00:1c.1:   bridge window [mem 0x54100000-0x550fffff]
[    0.681279] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.681295] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.681305] pci 0000:00:1c.2:   bridge window [io  0x1000-0x2fff]
[    0.681318] pci 0000:00:1c.2:   bridge window [mem 0x53000000-0x540fffff]
[    0.681330] pci 0000:00:1c.2:   bridge window [mem 0x52000000-0x52ffffff 64bit pref]
[    0.681346] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    0.681354] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.681366] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.681377] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.681441] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.681454] pci 0000:00:1c.0: setting latency timer to 64
[    0.681471] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[    0.681495] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.681508] pci 0000:00:1c.1: setting latency timer to 64
[    0.681536] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.681548] pci 0000:00:1c.2: setting latency timer to 64
[    0.681566] pci 0000:00:1e.0: setting latency timer to 64
[    0.681578] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.681586] pci_bus 0000:00: resource 5 [io  0x0d00-0xefff]
[    0.681595] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.681604] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
[    0.681613] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.681622] pci_bus 0000:01: resource 1 [mem 0x55100000-0x561fffff]
[    0.681631] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
[    0.681640] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.681649] pci_bus 0000:02: resource 1 [mem 0x54100000-0x550fffff]
[    0.681658] pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]
[    0.681667] pci_bus 0000:03: resource 0 [io  0x1000-0x2fff]
[    0.681676] pci_bus 0000:03: resource 1 [mem 0x53000000-0x540fffff]
[    0.681685] pci_bus 0000:03: resource 2 [mem 0x52000000-0x52ffffff 64bit pref]
[    0.681695] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.681703] pci_bus 0000:04: resource 5 [io  0x0d00-0xefff]
[    0.681712] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.681721] pci_bus 0000:04: resource 7 [mem 0x40000000-0xfebfffff]
[    0.681848] NET: Registered protocol family 2
[    0.682045] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.682885] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.683943] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.684529] TCP: Hash tables configured (established 131072 bind 65536)
[    0.684539] TCP reno registered
[    0.684557] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.684581] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.684895] NET: Registered protocol family 1
[    0.684954] pci 0000:00:02.0: Boot video device
[    0.685292] PCI: CLS 0 bytes, default 64
[    0.685361] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.685369] Simple Boot Flag at 0x44 set to 0x1
[    0.686001] cpufreq-nforce2: No nForce2 chipset.
[    0.686469] audit: initializing netlink socket (disabled)
[    0.686500] type=2000 audit(1313016459.680:1): initialized
[    0.710358] highmem bounce pool size: 64 pages
[    0.710374] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.717079] VFS: Disk quotas dquot_6.5.2
[    0.717285] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.719834] fuse init (API version 7.16)
[    0.720220] msgmni has been set to 1704
[    0.721081] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.721212] io scheduler noop registered
[    0.721219] io scheduler deadline registered
[    0.721292] io scheduler cfq registered (default)
[    0.721646] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.721738] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.721899] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.721984] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.722154] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.722235] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.722504] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.722607] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.722786] intel_idle: MWAIT substates: 0x20220
[    0.722804] intel_idle: v0.4 model 0x1C
[    0.722810] intel_idle: lapic_timer_reliable_states 0x2
[    0.722827] Marking TSC unstable due to TSC halts in idle states deeper than C2
[    0.772515] Freeing initrd memory: 12576k freed
[    0.784175] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.848090] ACPI: AC Adapter [AC] (on-line)
[    0.848332] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.848344] ACPI: Power Button [PWRB]
[    0.848463] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.848507] ACPI: Lid Switch [LID0]
[    0.848621] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.848631] ACPI: Sleep Button [SLPB]
[    0.848769] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.848778] ACPI: Power Button [PWRF]
[    0.848944] ACPI: Fan [FAN] (on)
[    0.849298] ACPI: acpi_idle yielding to intel_idle
[    0.914515] thermal LNXTHERM:00: registered as thermal_zone0
[    0.914522] ACPI: Thermal Zone [THRM] (27 C)
[    0.914570] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.914721] ERST: Table is not found!
[    0.914901] isapnp: Scanning for PnP cards...
[    0.914947] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.976111] ACPI: Battery Slot [BAT0] (battery absent)
[    1.268791] isapnp: No Plug & Play device found
[    1.276325] Linux agpgart interface v0.103
[    1.276486] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[    1.276757] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.276970] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.277211] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[    1.280462] brd: module loaded
[    1.281972] loop: module loaded
[    1.282224] i2c-core: driver [adp5520] using legacy suspend method
[    1.282230] i2c-core: driver [adp5520] using legacy resume method
[    1.282461] ata_piix 0000:00:1f.1: version 2.13
[    1.282489] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.282555] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.283385] scsi0 : ata_piix
[    1.283631] scsi1 : ata_piix
[    1.284492] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50c0 irq 14
[    1.284500] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50c8 irq 15
[    1.284602] ata2: port disabled. ignoring.
[    1.285590] Fixed MDIO Bus: probed
[    1.285704] PPP generic driver version 2.4.2
[    1.285854] tun: Universal TUN/TAP device driver, 1.6
[    1.285859] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.286092] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.286138] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.286174] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.286182] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.286278] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.286379] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.286398] ehci_hcd 0000:00:1d.7: debug port 1
[    1.290277] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.290313] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x56344400
[    1.304033] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.304356] hub 1-0:1.0: USB hub found
[    1.304368] hub 1-0:1.0: 8 ports detected
[    1.304556] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.304596] uhci_hcd: USB Universal Host Controller Interface driver
[    1.304673] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.304688] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.304696] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.304814] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.304909] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000050a0
[    1.305223] hub 2-0:1.0: USB hub found
[    1.305234] hub 2-0:1.0: 2 ports detected
[    1.305387] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.305401] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.305408] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.305514] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.305620] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005080
[    1.305929] hub 3-0:1.0: USB hub found
[    1.305940] hub 3-0:1.0: 2 ports detected
[    1.306103] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.306117] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.306124] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.306224] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.308111] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060
[    1.308431] hub 4-0:1.0: USB hub found
[    1.308442] hub 4-0:1.0: 2 ports detected
[    1.308609] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.308623] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.308630] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.308730] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.308840] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005040
[    1.309149] hub 5-0:1.0: USB hub found
[    1.309160] hub 5-0:1.0: 2 ports detected
[    1.309422] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    1.347514] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.347531] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.347875] mousedev: PS/2 mouse device common for all mice
[    1.349358] rtc_cmos 00:03: RTC can wake from S4
[    1.349518] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.349565] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.349809] device-mapper: uevent: version 1.0.3
[    1.350024] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    1.350206] device-mapper: multipath: version 1.2.0 loaded
[    1.350215] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.350451] EISA: Probing bus 0 at eisa.0
[    1.350460] EISA: Cannot allocate resource for mainboard
[    1.350467] Cannot allocate resource for EISA slot 1
[    1.350472] Cannot allocate resource for EISA slot 2
[    1.350478] Cannot allocate resource for EISA slot 3
[    1.350483] Cannot allocate resource for EISA slot 4
[    1.350489] Cannot allocate resource for EISA slot 5
[    1.350494] Cannot allocate resource for EISA slot 6
[    1.350499] Cannot allocate resource for EISA slot 7
[    1.350505] Cannot allocate resource for EISA slot 8
[    1.350509] EISA: Detected 0 cards.
[    1.350816] cpuidle: using governor ladder
[    1.351086] cpuidle: using governor menu
[    1.351713] TCP cubic registered
[    1.352104] NET: Registered protocol family 10
[    1.353321] NET: Registered protocol family 17
[    1.353369] Registering the dns_resolver key type
[    1.354882] Using IPI No-Shortcut mode
[    1.355164] PM: Hibernation image not present or could not be loaded.
[    1.355189] registered taskstats version 1
[    1.355706]   Magic number: 7:334:805
[    1.355861] rtc_cmos 00:03: setting system clock to 2011-08-10 22:47:40 UTC (1313016460)
[    1.355869] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.355873] EDD information not available.
[    1.376857] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.440353] Freeing unused kernel memory: 700k freed
[    1.440840] Write protecting the kernel text: 5192k
[    1.440929] Write protecting the kernel read-only data: 2148k
[    1.497038] <30>udev[65]: starting version 167
[    1.619252] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    1.626094] Btrfs loaded
[    1.907323] ATL1E 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.907349] ATL1E 0000:03:00.0: setting latency timer to 64
[    1.989470] ahci 0000:00:1f.2: version 3.0
[    1.989505] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.989610] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    1.989696] ahci: SSS flag set, parallel bus scan disabled
[    1.989758] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[    1.989771] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part
[    1.989784] ahci 0000:00:1f.2: setting latency timer to 64
[    1.992096] scsi2 : ahci
[    1.992409] scsi3 : ahci
[    1.992718] scsi4 : ahci
[    1.993022] scsi5 : ahci
[    1.993742] ata3: SATA max UDMA/133 abar m1024@0x56344000 port 0x56344100 irq 43
[    1.993752] ata4: DUMMY
[    1.993761] ata5: SATA max UDMA/133 abar m1024@0x56344000 port 0x56344200 irq 43
[    1.993769] ata6: DUMMY
[    2.312144] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.313586] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.313897] ata3.00: ATA-8: ST9160310AS, 0303, max UDMA/133
[    2.313909] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.315531] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.315812] ata3.00: configured for UDMA/133
[    2.316161] scsi 2:0:0:0: Direct-Access     ATA      ST9160310AS      0303 PQ: 0 ANSI: 5
[    2.316757] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.316781] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.317022] sd 2:0:0:0: [sda] Write Protect is off
[    2.317033] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.317158] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.631385]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    2.632600] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.636155] ata5: SATA link down (SStatus 0 SControl 300)
[    3.699260] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   10.840833] Adding 2928636k swap on /dev/sda5.  Priority:-1 extents:1 across:2928636k
[   10.906218] <30>udev[296]: starting version 167
[   11.068259] lp: driver loaded but no devices found
[   11.137071] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   11.137854] acpi device:19: registered as cooling_device3
[   11.138295] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[   11.138598] ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
[   11.352559] lib80211: common routines for IEEE802.11 drivers
[   11.352570] lib80211_crypt: registered algorithm 'NULL'
[   11.437409] [drm] Initialized drm 1.1.0 20060810
[   11.585686] intel_rng: FWH not detected
[   11.620871] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   11.655486] leds_ss4200: no LED devices found
[   11.726247] wl: module license 'MIXED/Proprietary' taints kernel.
[   11.726258] Disabling lock debugging due to kernel taint
[   11.831802] Linux video capture interface: v2.00
[   11.881126] uvcvideo: Found UVC 1.00 device WebCam (0c45:62c0)
[   11.903116] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input6
[   11.903568] usbcore: registered new interface driver uvcvideo
[   11.903576] USB Video Class driver (v1.0.0)
[   11.923366] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   12.259974] type=1400 audit(1313009271.399:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=498 comm="apparmor_parser"
[   12.264442] type=1400 audit(1313009271.407:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=511 comm="apparmor_parser"
[   12.265555] type=1400 audit(1313009271.407:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=511 comm="apparmor_parser"
[   12.266272] type=1400 audit(1313009271.407:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=511 comm="apparmor_parser"
[   12.268237] type=1400 audit(1313009271.411:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=498 comm="apparmor_parser"
[   12.268962] type=1400 audit(1313009271.411:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=498 comm="apparmor_parser"
[   12.387822] wl 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   12.387841] wl 0000:01:00.0: setting latency timer to 64
[   12.423617] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   12.423632] i915 0000:00:02.0: setting latency timer to 64
[   12.576915] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   12.576925] [drm] Driver supports precise vblank timestamp query.
[   12.601724] lib80211_crypt: registered algorithm 'TKIP'
[   12.668947] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   12.669429] [drm] initialized overlay support
[   12.908800] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38
[   12.964426] Console: switching to colour frame buffer device 128x37
[   12.964510] fb0: inteldrmfb frame buffer device
[   12.964516] drm: registered panic notifier
[   12.965190] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   13.040111] fixme: max PWM is zero.
[   13.213098] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.213230] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   13.213287] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   13.293359] hda_codec: ALC272X: BIOS auto-probing.
[   13.308989] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   13.309399] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   13.455057] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000
[   13.575648] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[   15.412635] type=1400 audit(1313009274.555:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=697 comm="apparmor_parser"
[   15.414119] type=1400 audit(1313009274.555:9): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=696 comm="apparmor_parser"
[   15.416805] type=1400 audit(1313009274.559:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=697 comm="apparmor_parser"
[   15.417561] type=1400 audit(1313009274.559:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=697 comm="apparmor_parser"
[   15.527656] ppdev: user-space parallel port driver
[   16.232381] ATL1E 0000:03:00.0: irq 45 for MSI/MSI-X
[   16.233635] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.978727] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[   18.423906] EXT4-fs (sda6): re-mounted. Opts: commit=0
[   24.362706] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[   25.796660] EXT4-fs (sda6): re-mounted. Opts: commit=0
[   27.200020] eth1: no IPv6 routers present
[   71.232205] usb 1-1: new high speed USB device using ehci_hcd and address 3
[   71.476120] IR NEC protocol handler initialized
[   71.489281] IR RC5(x) protocol handler initialized
[   71.510523] IR RC6 protocol handler initialized
[   71.518238] IR JVC protocol handler initialized
[   71.524800] IR Sony protocol handler initialized
[   71.536725] lirc_dev: IR Remote Control driver registered, major 251
[   71.554547] IR LIRC bridge handler initialized
[   71.926743] dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware
[   71.980476] dvb-usb: did not find the firmware file. (dvb-usb-af9015.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
[   71.980507] dvb_usb_af9015: probe of 1-1:1.0 failed with error -2
[   71.980592] usbcore: registered new interface driver dvb_usb_af9015
[   72.164917] usbcore: registered new interface driver usbhid
[   72.164926] usbhid: USB HID core driver

Je ne connait rien a tout sa par contre


Merci de ton aide,

el Pacha

Hors ligne

#4 Le 11/08/2011, à 08:35

durthu

Re : [Résolu] Terratec cinergy t Stick RC mkII (clef TNT)

[71.980476] dvb-usb: did not find the firmware file. (dvb-usb-af9015.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)

Voilà le souci.

Le firmware de ta clé n'est pas installé donc elle ne peut pas être utilisée.


Voici le lien pour récupérer le firmware mais je ne sais plus dans quel répertoire tu dois le copier.

EDIT : il faut que tu télécharge le firmware et que tu le copies dans le répertoire /lib/firmware/
il vaut mieux faire ça en ligne de commande et redémarrer pour charger le firmware

RE EDIT : je viens de voir sur cette page que ce firmware fait partie du paquet linux-firmware-nonfree, essaye de l'installer si ce n'est pas déjà fait avec ton gestionnaire de paquets.

Dernière modification par durthu (Le 11/08/2011, à 11:01)

Hors ligne

#5 Le 12/08/2011, à 10:55

elPacha

Re : [Résolu] Terratec cinergy t Stick RC mkII (clef TNT)

comment je dois faire en ligne de commande?
desole sa fait pas super longtemp que je suis sous linux et le terminal mais en grande partie inconue.
Pourai tu me guider s'il te plait?


Merci de ton aide,

el Pacha

Hors ligne

#6 Le 12/08/2011, à 11:08

elPacha

Re : [Résolu] Terratec cinergy t Stick RC mkII (clef TNT)

Pour les personnes qui ont le même problèmes. A defaut des ligne de commande, télécharger la cible de ce lien : http://www.otit.fi/~crope/v4l-dvb/af901 … -af9015.fw   (merci durthu!!) et faite : gksudo nautilus

Une fois la fenetre ouverte deplacer juste le fichier télécharger dans /lib/firmware/
Redemarrer et sa devrait marcher.

Merci durthu de ton aide ^^


Merci de ton aide,

el Pacha

Hors ligne

#7 Le 12/08/2011, à 11:11

durthu

Re : [Résolu] Terratec cinergy t Stick RC mkII (clef TNT)

salut,
 
dans un terminal, tape cette commande pour installer le paquet pouvant contenir le firmware

sudo apt-get install linux-firmware-nonfree

on va te demander ton mot de passe (ne t'inquiète pas si rien ne s'affiche quand tu le tapes c'est normal)

si le paquet s'installe normalement, branche ta clé et renvoie nous encore le résultat de la commande dmesg.

Quel logiciel veux tu utiliser pour regarder la télé ?

EDIT : Je viens de voir ton message, tout fonctionne bien alors ??

Dernière modification par durthu (Le 12/08/2011, à 11:12)

Hors ligne

#8 Le 13/08/2011, à 10:20

elPacha

Re : [Résolu] Terratec cinergy t Stick RC mkII (clef TNT)

Alors j'ai installer le paquet en mode graphique hier et j'ai pu configurer mon controleur DVB avec toute les chaines depuis l'antenne du toit. Ensuite j'ai voulu regarder la tele depuis totem, j'ai suivi la documentation totem pour la partie tnt.
Totem me detecte la liste de chaine que j'avais trouver avec le reglage dvb mais quand je veu en regarder une il me dit : impossible de lire la source

Donc depuis hier je suis bloque alors je tente plin de chose, j'ai supprime mon peripherique des peripherique dvb configurer, et la j'essaye en vain de lui faire recapter les chaines. Je relance la configuration depuis le centre de controle dvb mais la il mouline pendant des heures sans me detecter les chaines alors que hier il a fait sa en 5 min.

Me revoila dans l'impasse.

voila ce que me dit dmesg :

[   19.019764] ppdev: user-space parallel port driver
[   20.762494] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   27.027017] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   28.664048] eth1: no IPv6 routers present
[   38.932089] usb 1-1: new high speed USB device using ehci_hcd and address 3
[   39.375985] IR NEC protocol handler initialized
[   39.402426] IR RC5(x) protocol handler initialized
[   39.424067] IR RC6 protocol handler initialized
[   39.459161] IR JVC protocol handler initialized
[   39.466415] IR Sony protocol handler initialized
[   39.477815] lirc_dev: IR Remote Control driver registered, major 251
[   39.498159] IR LIRC bridge handler initialized
[   39.863385] dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware
[   39.967569] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
[   40.061525] dvb-usb: found a 'TerraTec Cinergy T Stick RC' in warm state.
[   40.066474] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   40.067169] DVB: registering new adapter (TerraTec Cinergy T Stick RC)
[   40.151119] af9013: firmware version:4.95.0.0
[   40.157015] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
[   40.318641] tda18218: NXP TDA18218HN successfully identified.
[   40.320901] Registered IR keymap rc-empty
[   40.321178] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/rc/rc0/input10
[   40.321373] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/rc/rc0
[   40.321385] dvb-usb: schedule remote query interval to 500 msecs.
[   40.321396] dvb-usb: TerraTec Cinergy T Stick RC successfully initialized and connected.
[   40.339352] usbcore: registered new interface driver dvb_usb_af9015
[   40.522218] usbcore: registered new interface driver usbhid
[   40.522227] usbhid: USB HID core driver

J'ai enlever tout ce qui ne concerner pas la parti dvb

J'ai installer w-scan hier soir pour me creer un fichier channel.conf pour me-tv au cas où et voici ce que me donne le terminal quand je lance le scan :

scan fr-Agen > ~/.me-tv/channels.conf
scanning fr-Agen
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 666000000 0 9 9 3 1 4 0
initial transponder 746000000 0 9 9 3 1 4 0
initial transponder 698000000 0 9 9 3 1 4 0
initial transponder 714000000 0 9 9 3 1 4 0
initial transponder 642000000 0 9 9 3 1 4 0
initial transponder 722000000 0 9 9 3 1 4 0
>>> tune to: 666000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 666000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 746000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 746000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 698000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 698000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 714000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 714000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 642000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 642000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 722000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 722000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.


Merci de ton aide,

el Pacha

Hors ligne

#9 Le 13/08/2011, à 12:50

elPacha

Re : [Résolu] Terratec cinergy t Stick RC mkII (clef TNT)

J'ai reussi a faire la recherche de chaine depuis le centre de controle dvb mais quand je veu regarder la tv avec totem il me met :
An error occured
impossible de lire a partir de la ressource

Quelqu'un sait ce que sa peu bien etre?


Merci de ton aide,

el Pacha

Hors ligne

#10 Le 18/08/2011, à 17:38

Lulux3

Re : [Résolu] Terratec cinergy t Stick RC mkII (clef TNT)

Bonjour
J'arrive ici suite à une recherche concernant la même erreur.
Dans mon cas, il ne s'agit pas d'un problème matériel ou de firmware, puisque ma TERRATEC Cinergy T² fonctionne parfaitement avec Me-TV.
Je te conseille d'essayer ce logiciel (dispo dans les dépôts) pour tester ton stick.
Si quelqu'un a une solution pour Totem, je suis preneur, car j'ai eu la bonne surprise de voir que le décodage du EAC3+ (audio des chaînes HD) est maintenant implémenté, alors que sous Me-TV, ces chaînes sont encore muettes!
A+

Hors ligne

#11 Le 12/10/2011, à 05:46

TicTacTux

Re : [Résolu] Terratec cinergy t Stick RC mkII (clef TNT)

Salut! je fais un petit up du sujet! J'ai une T-Stick MK II aussi et dans le dmesg no problem il indique le nom de ma clé. Pareil pour le lsusb quand ma clé est branchée, ça marche...

Le problème c'est que je ne sais pas comment rechercher les chaines car la commande w_scan me renvoie :

julien@admin-dev310:~$ w_scan -c FR -X > channels.conf
w_scan version 20100316 (compiled for DVB API 5.1)
using settings for FRANCE
DVB aerial
DVB-T FR
frontend_type DVB-T, channellist 5
output format czap/tzap/szap/xine
Info: using DVB adapter auto detection.
main:2930: FATAL: ***** NO USEABLE DVB CARD FOUND. *****
Please check wether dvb driver is loaded and
verify that no dvb application (i.e. vdr) is running.

aucun programme ne tourne... à part firefox et le terminal


Petit rappel de l'environnement technique :

OS : Ubuntu 10.10 - nommée Maverick Meerkat
kernel : 2.6.35-30-generic-pae

Dernière modification par TicTacTux (Le 12/10/2011, à 05:48)

Hors ligne

#12 Le 12/10/2011, à 21:26

durthu

Re : [Résolu] Terratec cinergy t Stick RC mkII (clef TNT)

salut,

peux tu poster la sortie de dmesg car le fait qu'il indique le nom de ta clé ne veux pas dire qu'il est capable de l'utiliser.

Hors ligne

#13 Le 17/10/2011, à 00:40

TicTacTux

Re : [Résolu] Terratec cinergy t Stick RC mkII (clef TNT)

alors j'ai pris que les lignes concernant le port USB ça donne ça

[20935.540038] usb 2-1: new high speed USB device using ehci_hcd and address 7
[20935.680938] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:04.0/0000:01:06.2/usb2/2-1/2-1:1.1/input/input10
[20935.681132] generic-usb 0003:0CCD:0097.0009: input,hidraw4: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:01:06.2-1/input1

Hors ligne

#14 Le 17/10/2011, à 00:41

TicTacTux

Re : [Résolu] Terratec cinergy t Stick RC mkII (clef TNT)

je lance une mise à niveau Ubuntu 11.04 peut être que Natty résoudra le problème...

Hors ligne

#15 Le 20/10/2011, à 23:26

TicTacTux

Re : [Résolu] Terratec cinergy t Stick RC mkII (clef TNT)

bon toujours la même chose... petite avancée, j'ai plus le message d'erreur de Me-TV comme quoi aucun périphérique DVB n'a été trouvé...

Solution de secours : Refaire sa partoche de sda avec 75Go pour Windows (en exclu pour la télé) et 540 Go de ubuntu qui deviendra le main OS de l'ordi...

Hors ligne

#16 Le 21/10/2011, à 10:10

durthu

Re : [Résolu] Terratec cinergy t Stick RC mkII (clef TNT)

TicTacTux a écrit :

bon toujours la même chose... petite avancée, j'ai plus le message d'erreur de Me-TV comme quoi aucun périphérique DVB n'a été trouvé...

Solution de secours : Refaire sa partoche de sda avec 75Go pour Windows (en exclu pour la télé) et 540 Go de ubuntu qui deviendra le main OS de l'ordi...

avant de faire ça, donne moi la sortie de dmesg complete après avoir branché ta clé.

Hors ligne

#17 Le 23/10/2011, à 23:32

TicTacTux

Re : [Résolu] Terratec cinergy t Stick RC mkII (clef TNT)

[    0.367271] pci 0000:00:0b.0: setting latency timer to 64
[    0.367276] pci 0000:00:0c.0: setting latency timer to 64
[    0.367279] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
[    0.367282] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[    0.367284] pci_bus 0000:00: resource 6 [io  0x8000-0xffff]
[    0.367286] pci_bus 0000:00: resource 7 [io  0x03b0-0x03df]
[    0.367288] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[    0.367290] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xefffffff]
[    0.367293] pci_bus 0000:00: resource 10 [mem 0xf4000000-0xfe02ffff]
[    0.367295] pci_bus 0000:00: resource 11 [io  0x1c00-0x1c80]
[    0.367298] pci_bus 0000:00: resource 12 [mem 0xfec80000-0xfecbffff]
[    0.367300] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.367302] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.367305] pci_bus 0000:01: resource 2 [mem 0xfdd00000-0xfddfffff pref]
[    0.367307] pci_bus 0000:01: resource 4 [io  0x0000-0x03af]
[    0.367309] pci_bus 0000:01: resource 5 [io  0x03e0-0x0cf7]
[    0.367311] pci_bus 0000:01: resource 6 [io  0x8000-0xffff]
[    0.367313] pci_bus 0000:01: resource 7 [io  0x03b0-0x03df]
[    0.367315] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff]
[    0.367318] pci_bus 0000:01: resource 9 [mem 0xe0000000-0xefffffff]
[    0.367320] pci_bus 0000:01: resource 10 [mem 0xf4000000-0xfe02ffff]
[    0.367322] pci_bus 0000:01: resource 11 [io  0x1c00-0x1c80]
[    0.367325] pci_bus 0000:01: resource 12 [mem 0xfec80000-0xfecbffff]
[    0.367327] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
[    0.367329] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[    0.367332] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.367334] pci_bus 0000:03: resource 0 [io  0x9000-0x9fff]
[    0.367336] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    0.367339] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.367341] pci_bus 0000:04: resource 0 [io  0x8000-0x8fff]
[    0.367343] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
[    0.367346] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[    0.367381] NET: Registered protocol family 2
[    0.367443] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.367674] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.368247] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.368528] TCP: Hash tables configured (established 131072 bind 65536)
[    0.368530] TCP reno registered
[    0.368534] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.368544] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.368634] NET: Registered protocol family 1
[    0.384080] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.384129] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.384188] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.384244] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.384301] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.384362] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.384428] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.384498] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.384555] pci 0000:02:00.0: Boot video device
[    0.384558] PCI: CLS 64 bytes, default 64
[    0.384824] cpufreq-nforce2: No nForce2 chipset.
[    0.384848] Scanning for low memory corruption every 60 seconds
[    0.384937] audit: initializing netlink socket (disabled)
[    0.384947] type=2000 audit(1319411584.384:1): initialized
[    0.394238] highmem bounce pool size: 64 pages
[    0.394242] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.395527] VFS: Disk quotas dquot_6.5.2
[    0.395600] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.396142] fuse init (API version 7.14)
[    0.396226] msgmni has been set to 1615
[    0.633129] Freeing initrd memory: 15592k freed
[    0.642227] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.642230] io scheduler noop registered
[    0.642232] io scheduler deadline registered
[    0.642245] io scheduler cfq registered (default)
[    0.642348] pcieport 0000:00:09.0: setting latency timer to 64
[    0.642367]   alloc irq_desc for 40 on node -1
[    0.642369]   alloc kstat_irqs on node -1
[    0.642379] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[    0.642423] pcieport 0000:00:0b.0: setting latency timer to 64
[    0.642437]   alloc irq_desc for 41 on node -1
[    0.642439]   alloc kstat_irqs on node -1
[    0.642443] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[    0.642480] pcieport 0000:00:0c.0: setting latency timer to 64
[    0.642494]   alloc irq_desc for 42 on node -1
[    0.642496]   alloc kstat_irqs on node -1
[    0.642500] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[    0.642556] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.642576] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.642735] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.642740] ACPI: Power Button [PWRB]
[    0.642804] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.642807] ACPI: Power Button [PWRF]
[    0.642858] ACPI: Fan [FAN] (on)
[    0.643132] ACPI: acpi_idle registered with cpuidle
[    0.646545] ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20100428/nspredef-1059)
[    0.646553] ACPI: Expecting a [Reference] package element, found type 0
[    0.646554] ACPI: Invalid passive threshold
[    0.646811] thermal LNXTHERM:01: registered as thermal_zone0
[    0.646817] ACPI: Thermal Zone [THRM] (40 C)
[    0.646876] ERST: Table is not found!
[    0.646915] isapnp: Scanning for PnP cards...
[    0.647093] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.648241] brd: module loaded
[    0.648689] loop: module loaded
[    0.648928] pata_acpi 0000:00:06.0: setting latency timer to 64
[    0.649242] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[    0.649248]   alloc irq_desc for 23 on node -1
[    0.649250]   alloc kstat_irqs on node -1
[    0.649260] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    0.649276] pata_acpi 0000:00:08.0: setting latency timer to 64
[    0.649282] pata_acpi 0000:00:08.0: PCI INT A disabled
[    0.649538] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[    0.649541] pata_acpi 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
[    0.649553] pata_acpi 0000:00:08.1: setting latency timer to 64
[    0.649559] pata_acpi 0000:00:08.1: PCI INT B disabled
[    0.649801] Fixed MDIO Bus: probed
[    0.649828] PPP generic driver version 2.4.2
[    0.649860] tun: Universal TUN/TAP device driver, 1.6
[    0.649862] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.649931] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.650191] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[    0.650193]   alloc irq_desc for 22 on node -1
[    0.650195]   alloc kstat_irqs on node -1
[    0.650202] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[    0.650217] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    0.650220] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    0.650251] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.650276] ehci_hcd 0000:00:02.1: debug port 1
[    0.650283] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    0.650305] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[    0.664522] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.664624] hub 1-0:1.0: USB hub found
[    0.664629] hub 1-0:1.0: 10 ports detected
[    0.664947] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[    0.664949]   alloc irq_desc for 19 on node -1
[    0.664951]   alloc kstat_irqs on node -1
[    0.664957] ehci_hcd 0000:01:06.2: PCI INT C -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[    0.664966] ehci_hcd 0000:01:06.2: setting latency timer to 64
[    0.664969] ehci_hcd 0000:01:06.2: EHCI Host Controller
[    0.664996] ehci_hcd 0000:01:06.2: new USB bus registered, assigned bus number 2
[    0.665038] ehci_hcd 0000:01:06.2: irq 19, io mem 0xfdeff000
[    0.680517] ehci_hcd 0000:01:06.2: USB 2.0 started, EHCI 1.00
[    0.680599] hub 2-0:1.0: USB hub found
[    0.680602] hub 2-0:1.0: 4 ports detected
[    0.680656] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.680912] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[    0.680914]   alloc irq_desc for 21 on node -1
[    0.680916]   alloc kstat_irqs on node -1
[    0.680923] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21
[    0.680931] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.680933] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.680960] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[    0.680981] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000
[    0.738589] hub 3-0:1.0: USB hub found
[    0.738593] hub 3-0:1.0: 10 ports detected
[    0.738654] uhci_hcd: USB Universal Host Controller Interface driver
[    0.738925] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[    0.738927]   alloc irq_desc for 17 on node -1
[    0.738929]   alloc kstat_irqs on node -1
[    0.738935] uhci_hcd 0000:01:06.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[    0.738941] uhci_hcd 0000:01:06.0: setting latency timer to 64
[    0.738943] uhci_hcd 0000:01:06.0: UHCI Host Controller
[    0.738975] uhci_hcd 0000:01:06.0: new USB bus registered, assigned bus number 4
[    0.739011] uhci_hcd 0000:01:06.0: irq 17, io base 0x0000bc00
[    0.739112] hub 4-0:1.0: USB hub found
[    0.739116] hub 4-0:1.0: 2 ports detected
[    0.739407] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[    0.739409]   alloc irq_desc for 18 on node -1
[    0.739411]   alloc kstat_irqs on node -1
[    0.739418] uhci_hcd 0000:01:06.1: PCI INT B -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[    0.739423] uhci_hcd 0000:01:06.1: setting latency timer to 64
[    0.739425] uhci_hcd 0000:01:06.1: UHCI Host Controller
[    0.739454] uhci_hcd 0000:01:06.1: new USB bus registered, assigned bus number 5
[    0.739488] uhci_hcd 0000:01:06.1: irq 18, io base 0x0000b800
[    0.739582] hub 5-0:1.0: USB hub found
[    0.739584] hub 5-0:1.0: 2 ports detected
[    0.739676] PNP: No PS/2 controller found. Probing ports directly.
[    0.740099] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.740106] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.740202] mice: PS/2 mouse device common for all mice
[    0.740303] rtc_cmos 00:05: RTC can wake from S4
[    0.740340] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.740378] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.740475] device-mapper: uevent: version 1.0.3
[    0.740631] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    0.740775] device-mapper: multipath: version 1.1.1 loaded
[    0.740778] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.740917] EISA: Probing bus 0 at eisa.0
[    0.740919] EISA: Cannot allocate resource for mainboard
[    0.740922] Cannot allocate resource for EISA slot 1
[    0.740924] Cannot allocate resource for EISA slot 2
[    0.740937] Cannot allocate resource for EISA slot 8
[    0.740938] EISA: Detected 0 cards.
[    0.741131] cpuidle: using governor ladder
[    0.741133] cpuidle: using governor menu
[    0.741402] TCP cubic registered
[    0.741517] NET: Registered protocol family 10
[    0.741838] lo: Disabled Privacy Extensions
[    0.742035] NET: Registered protocol family 17
[    0.742068] powernow-k8: Found 1 AMD Phenom(tm) 8600 Triple-Core Processor (3 cpu cores) (version 2.20.00)
[    0.742110] powernow-k8:    0 : pstate 0 (2300 MHz)
[    0.742112] powernow-k8:    1 : pstate 1 (1150 MHz)
[    0.782840] Using IPI No-Shortcut mode
[    0.782913] PM: Resume from disk failed.
[    0.782923] registered taskstats version 1
[    0.783157]   Magic number: 15:362:252
[    0.783255] rtc_cmos 00:05: setting system clock to 2011-10-23 23:13:05 UTC (1319411585)
[    0.783258] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.783259] EDD information not available.
[    0.999856] isapnp: No Plug & Play device found
[    0.999907] Freeing unused kernel memory: 708k freed
[    1.000284] Write protecting the kernel text: 5100k
[    1.000376] Write protecting the kernel read-only data: 2016k
[    1.023371] udev[88]: starting version 163
[    1.029056] usb 1-3: new high speed USB device using ehci_hcd and address 3
[    1.060968] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.061298] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[    1.061305]   alloc irq_desc for 20 on node -1
[    1.061307]   alloc kstat_irqs on node -1
[    1.061321] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20
[    1.061326] forcedeth 0000:00:07.0: setting latency timer to 64
[    1.103474] firewire_ohci 0000:01:09.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[    1.103481] firewire_ohci 0000:01:09.0: setting latency timer to 64
[    1.171530] Initializing USB Mass Storage driver...
[    1.171689] scsi0 : usb-storage 1-3:1.3
[    1.171854] usbcore: registered new interface driver usb-storage
[    1.171859] USB Mass Storage support registered.
[    1.204013] firewire_ohci: Added fw-ohci device 0000:01:09.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x1
[    1.384023] usb 1-6: new high speed USB device using ehci_hcd and address 5
[    1.518676] scsi1 : usb-storage 1-6:1.0
[    1.581387] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:21:97:3a:ff:5c
[    1.581392] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[    1.581413] pata_amd 0000:00:06.0: version 0.4.1
[    1.581454] pata_amd 0000:00:06.0: setting latency timer to 64
[    1.581530] scsi2 : pata_amd
[    1.581600] scsi3 : pata_amd
[    1.582167] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.582170] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.582194] sata_nv 0000:00:08.0: version 3.5
[    1.582208] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    1.582259] sata_nv 0000:00:08.0: setting latency timer to 64
[    1.582355] scsi4 : sata_nv
[    1.582439] scsi5 : sata_nv
[    1.582645] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23
[    1.582649] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23
[    1.582684] sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
[    1.582732] sata_nv 0000:00:08.1: setting latency timer to 64
[    1.582781] scsi6 : sata_nv
[    1.582855] scsi7 : sata_nv
[    1.583065] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 23
[    1.583068] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 23
[    1.628523] usb 1-9: new high speed USB device using ehci_hcd and address 6
[    1.693092] firewire_core: created device fw0: GUID 00000ae6ffdeecc3, S400
[    1.747070] ata2: port disabled. ignoring.
[    1.766424] scsi8 : usb-storage 1-9:1.0
[    1.902358] ata5: SATA link down (SStatus 0 SControl 300)
[    2.048038] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.056021] usb 3-2: new low speed USB device using ohci_hcd and address 2
[    2.056162] ata3.00: ATA-8: WDC WD6400AAKS-65A7B0, 01.03B01, max UDMA/133
[    2.056166] ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.072159] ata3.00: configured for UDMA/133
[    2.072302] scsi 4:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-6 01.0 PQ: 0 ANSI: 5
[    2.072459] sd 4:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    2.072462] sd 4:0:0:0: Attached scsi generic sg0 type 0
[    2.072536] sd 4:0:0:0: [sda] Write Protect is off
[    2.072539] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.072584] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.072838]  sda: sda1 sda2 < sda5 > sda3
[    2.097485] sd 4:0:0:0: [sda] Attached SCSI disk
[    2.168597] scsi 0:0:0:0: Direct-Access     HP       Photosmart C4380 1.00 PQ: 0 ANSI: 5
[    2.169077] sd 0:0:0:0: Attached scsi generic sg1 type 0
[    2.170837] sd 0:0:0:0: [sdb] Attached SCSI removable disk
[    2.308695] usbcore: registered new interface driver hiddev
[    2.321721] input:   USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/input/input2
[    2.321801] generic-usb 0003:04D9:1503.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:02.0-2/input0
[    2.347604] input:   USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.1/input/input3
[    2.347653] generic-usb 0003:04D9:1503.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:02.0-2/input1
[    2.347665] usbcore: registered new interface driver usbhid
[    2.347667] usbhid: USB HID core driver
[    2.540043] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.548139] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
[    2.558107] scsi 1:0:0:0: Direct-Access     SAMSUNG  HM250HI               PQ: 0 ANSI: 2 CCS
[    2.558568] sd 1:0:0:0: Attached scsi generic sg2 type 0
[    2.559717] sd 1:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.560460] sd 1:0:0:0: [sdc] Write Protect is off
[    2.560462] sd 1:0:0:0: [sdc] Mode Sense: 28 00 00 00
[    2.560465] sd 1:0:0:0: [sdc] Assuming drive cache: write through
[    2.561958] sd 1:0:0:0: [sdc] Assuming drive cache: write through
[    2.561962]  sdc:
[    2.564153] ata4.00: configured for UDMA/100
[    2.572706] scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS50  TN02 PQ: 0 ANSI: 5
[    2.588019] usb 3-5: new full speed USB device using ohci_hcd and address 3
[    2.594420] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.594424] Uniform CD-ROM driver Revision: 3.20
[    2.594531] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    2.594599] sr 5:0:0:0: Attached scsi generic sg3 type 5
[    2.764845] scsi 8:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    2.765468] scsi 8:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    2.766092] scsi 8:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    2.766717] scsi 8:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    2.767212] sd 8:0:0:0: Attached scsi generic sg4 type 0
[    2.768397] sd 8:0:0:1: Attached scsi generic sg5 type 0
[    2.769027] sd 8:0:0:2: Attached scsi generic sg6 type 0
[    2.769305] sd 8:0:0:3: Attached scsi generic sg7 type 0
[    2.771973] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[    2.773432] sd 8:0:0:1: [sde] Attached SCSI removable disk
[    2.774217] sd 8:0:0:2: [sdf] Attached SCSI removable disk
[    2.774841] sd 8:0:0:3: [sdg] Attached SCSI removable disk
[    2.822703] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-5/3-5:1.0/input/input4
[    2.822789] generic-usb 0003:046D:C525.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-5/input0
[    2.833631] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-5/3-5:1.1/input/input5
[    2.833759] generic-usb 0003:046D:C525.0004: input,hiddev96,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-5/input1
[    2.914294] ata6: SATA link down (SStatus 0 SControl 300)
[    2.944017] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    3.009742]  sdc1 sdc2 sdc3
[    3.011337] sd 1:0:0:0: [sdc] Assuming drive cache: write through
[    3.011341] sd 1:0:0:0: [sdc] Attached SCSI disk
[    3.084315] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:04.0/0000:01:06.2/usb2/2-1/2-1:1.1/input/input6
[    3.084414] generic-usb 0003:0CCD:0097.0005: input,hidraw4: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:01:06.2-1/input1
[    3.196727] usb 2-4: new high speed USB device using ehci_hcd and address 3
[    3.507983] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
[    3.507988] EXT4-fs (sda3): write access will be enabled during recovery
[    5.874219] EXT4-fs (sda3): orphan cleanup on readonly fs
[    5.874233] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 12582967
[    5.874309] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 19791929
[    5.874345] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 19792031
[    5.874358] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 19792025
[    5.874373] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 19791993
[    5.874385] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 19791983
[    5.874398] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 19791979
[    5.874410] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 19791977
[    5.895497] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 19791917
[    5.895544] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 19791893
[    5.895558] EXT4-fs (sda3): 10 orphan inodes deleted
[    5.895560] EXT4-fs (sda3): recovery complete
[    6.300924] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    8.037066] Adding 3464188k swap on /dev/sda5.  Priority:-1 extents:1 across:3464188k
[    8.744117] udev[460]: starting version 163
[    9.539824] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   11.192748] lp: driver loaded but no devices found
[   11.227093] Linux agpgart interface v0.103
[   11.323300] cfg80211: Calling CRDA to update world regulatory domain
[   11.526857] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[   11.533955] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[   11.533985] i2c i2c-1: nForce2 SMBus adapter at 0xf400
[   12.772465] cfg80211: World regulatory domain updated:
[   12.772469]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.772473]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.772476]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.772478]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.772480]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.772483]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.833855] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[   12.833863] HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
[   12.833867] hda_intel: Disable MSI for Nvidia chipset
[   12.833905] HDA Intel 0000:00:05.0: setting latency timer to 64
[   12.935006] type=1400 audit(1319404397.646:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=592 comm="apparmor_parser"
[   12.935026] type=1400 audit(1319404397.646:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=640 comm="apparmor_parser"
[   12.935270] type=1400 audit(1319404397.646:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=592 comm="apparmor_parser"
[   12.935295] type=1400 audit(1319404397.646:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=640 comm="apparmor_parser"
[   12.935419] type=1400 audit(1319404397.646:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=592 comm="apparmor_parser"
[   12.935450] type=1400 audit(1319404397.646:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=640 comm="apparmor_parser"
[   13.067907] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x6611
[   13.067941] usbcore: registered new interface driver usblp
[   13.217148] phy0: Selected rate control algorithm 'minstrel'
[   13.217730] Registered led device: rt73usb-phy0::radio
[   13.217745] Registered led device: rt73usb-phy0::assoc
[   13.217765] Registered led device: rt73usb-phy0::quality
[   13.218302] usbcore: registered new interface driver rt73usb
[   13.473592] nvidia: module license 'NVIDIA' taints kernel.
[   13.473598] Disabling lock debugging due to kernel taint
[   13.773016] hda_codec: ALC1200: BIOS auto-probing.
[   13.773022] hda_codec: ALC1200: SKU not ready 0x411111f0
[   13.932107] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[   13.932115]   alloc irq_desc for 16 on node -1
[   13.932118]   alloc kstat_irqs on node -1
[   13.932129] nvidia 0000:02:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
[   13.932138] nvidia 0000:02:00.0: setting latency timer to 64
[   13.932143] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   13.932323] NVRM: loading NVIDIA UNIX x86 Kernel Module  260.19.06  Mon Sep 13 06:35:06 PDT 2010
[   14.563090] type=1400 audit(1319404399.274:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1009 comm="apparmor_parser"
[   14.563431] type=1400 audit(1319404399.274:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1009 comm="apparmor_parser"
[   15.095912] ppdev: user-space parallel port driver
[   15.990322] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.992903]   alloc irq_desc for 43 on node -1
[   15.992907]   alloc kstat_irqs on node -1
[   15.992918] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[   15.993106] eth0: no link during initialization.
[   15.993722] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.076650] type=1400 audit(1319404400.790:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1178 comm="apparmor_parser"
[   16.076918] type=1400 audit(1319404400.790:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1178 comm="apparmor_parser"
[   18.522846] usb 1-3: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[   24.082968] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,commit=0
[   29.876795] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,commit=0
[   39.307548] padlock: VIA PadLock not detected.
[   45.158641] wlan0: authenticate with 00:17:33:e3:aa:90 (try 1)
[   45.160271] wlan0: authenticated
[   45.161760] wlan0: associate with 00:17:33:e3:aa:90 (try 1)
[   45.164013] wlan0: RX AssocResp from 00:17:33:e3:aa:90 (capab=0x401 status=0 aid=1)
[   45.164016] wlan0: associated
[   45.168465] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   55.872009] wlan0: no IPv6 routers present
[  858.860869] wlan0: deauthenticating from 00:17:33:e3:aa:90 by local choice (reason=3)
[  858.872744] cfg80211: All devices are disconnected, going to restore regulatory settings
[  858.872750] cfg80211: Restoring regulatory settings
[  858.872754] cfg80211: Calling CRDA to update world regulatory domain
[  859.032468] cfg80211: World regulatory domain updated:
[  859.032476]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  859.032482]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  859.032488]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  859.032493]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  859.032497]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  859.032501]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  875.428759] wlan0: authenticate with 00:17:33:e3:aa:90 (try 1)
[  875.434512] wlan0: authenticated
[  875.435986] wlan0: associate with 00:17:33:e3:aa:90 (try 1)
[  875.438371] wlan0: RX AssocResp from 00:17:33:e3:aa:90 (capab=0x401 status=0 aid=1)
[  875.438376] wlan0: associated
[ 1130.500774] usb 2-1: USB disconnect, address 2
[ 1132.756072] usb 2-1: new high speed USB device using ehci_hcd and address 4
[ 1132.897737] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:04.0/0000:01:06.2/usb2/2-1/2-1:1.1/input/input7
[ 1132.897922] generic-usb 0003:0CCD:0097.0006: input,hidraw4: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:01:06.2-1/input1

Pas pu aller plus haut... sorry ^^'

Hors ligne

#18 Le 24/10/2011, à 10:46

durthu

Re : [Résolu] Terratec cinergy t Stick RC mkII (clef TNT)

bizarre...

d'après ta sortie dmesg, ton stick n'est pas reconnu mais seul l'entrée (récepteur de la télécommande est reconnu).

Je ne peux pas t'aider plus, désolé

Hors ligne

#19 Le 02/02/2013, à 04:05

elPacha

Re : [Résolu] Terratec cinergy t Stick RC mkII (clef TNT)

Bonjour, j'ai trouve une solution bien qu'etrange
J'ai installer Konqueror et il la detecter aussitot.
Bonne journé


Merci de ton aide,

el Pacha

Hors ligne

Haut de page ↑