#1 Le 05/12/2006, à 16:32
- laurent7429
s-video , ordi portable , tv , pas d image...?
Bonjour a tous j ai suivi pas mal de tuto pour que mon ordi portable se décide enfin a balancer l image de mon ecran d ordi sur ma tv mais en vain
Je suis sous dapper , bureau gnome , carte graphique nvidia gforce FX 5100, ordi portable packardbell
J ai donc relier mon pc avec un cable s-vidéo (acheter), et une prise péritel, a ma tv 16/9 achetée il y a 5 ans.
J ai essayer le twinview mais ca ne marche pas, j ai donc essayer le tuto de "multiécran", mais je cale aussi: voici les info de mon xorg.conf:
"# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Mon May 15 13:23:42 PDT 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "ServerLayout"
Identifier "Basic Layout"
Screen 0 "Screen0"
Screen 1 "Screen1" rightof "Screen0"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "be"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Écran générique"
HorizSync 28.0 - 51.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor" #CRT
HorizSync 30-70
VertRefresh 50-140
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Television" #TV
HorizSync 30-50
VertRefresh 60
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV34 [GeForce FX Go5100]"
Driver "nvidia"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
Screen 1
BusID "PCI:4:0:0"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
Screen 0
Option "NoLogo" "true"
Option "RenderAccel" "true"
BusID "PCI:02:09:0"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
Screen 1
Option "TVOutFormat" "SVIDEO"
Option "TVStandard" "PAL-H"
Option "ConnectedMonitor" "Television"
BusID "PCI:02:09:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV34 [GeForce FX Go5100]"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Television"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "640x480"
EndSubSection
EndSection
"
voici la réponse a la commande "lspci":
"
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 11)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge)
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
0000:00:08.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02)
0000:00:09.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX Go5100] (rev a1)
0000:02:00.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)
moi@moi-laptop:~$ "
Voila je suis désoler de tout vous balncer comme ca, mais je merdouiile sur ce coup là!!!
Ha oui une derniere question, quand on me dit d'éditer un fichier, comme ici http://doc.ubuntu-fr.org/materiel/multi-ecran , je dois rajouter les lignes au texte initial ou remplacer????
Merci mirci morci marci!!!!
Hardy LTS 8.04
Mon pc revit!!
eeepc 901 eeebuntu! Merci linux!
Hors ligne
#2 Le 05/12/2006, à 18:58
- laurent7429
Re : s-video , ordi portable , tv , pas d image...?
toujours pas d idée, j aimerai bien regarder un film ce soir
Je plaisante je suis pas presser
Hardy LTS 8.04
Mon pc revit!!
eeepc 901 eeebuntu! Merci linux!
Hors ligne