Ubuntu-fr

konandrum

Problème installation de Périphèriques externe USB [Resolu]

Bonjour,

Je suis sous Ubuntu Edgy Eft (6.10 i386).

Je posséde un Graveur DVD externe LG GSA-2164D que je branche en USB (seul connectique possible).
Il fonctionnait parfaitement jusqu'a récement.

Voici les différents messages que j'obtient:

:~ $ lspci

00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 03)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)

Mes controlleur USB  semble OK

:~ $ lsusb

Bus 003 Device 001: ID 0000:0000  
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 003: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse
Bus 001 Device 001: ID 0000:0000

Je ne vois pas le graveur dans la liste de périphèriques branchés

:~ $ tail -f /var/log/messages

Jan 29 12:11:07 prac-pc10 kernel: [17179614.740000] Bluetooth: RFCOMM socket layer initialized
Jan 29 12:11:07 prac-pc10 kernel: [17179614.740000] Bluetooth: RFCOMM TTY layer initialized
Jan 29 12:11:07 prac-pc10 kernel: [17179614.740000] Bluetooth: RFCOMM ver 1.7
Jan 29 12:11:23 prac-pc10 gconfd (gaby-4901): démarrage (version 2.16.0), pid 4901 utilisateur « gaby »
Jan 29 12:11:23 prac-pc10 gconfd (gaby-4901): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0
Jan 29 12:11:23 prac-pc10 gconfd (gaby-4901): Adresse « xml:readwrite:/home/gaby/.gconf » résolue vers une source de configuration accessible en écriture à la position 1
Jan 29 12:11:23 prac-pc10 gconfd (gaby-4901): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 2
Jan 29 12:11:23 prac-pc10 gconfd (gaby-4901): Adresse « xml:readonly:/var/lib/gconf/debian.defaults » résolue vers une source de configuration en lecture seule à la position 3
Jan 29 12:11:23 prac-pc10 gconfd (gaby-4901): Adresse « xml:readonly:/var/lib/gconf/defaults » résolue vers une source de configuration en lecture seule à la position 4
Jan 29 12:11:30 prac-pc10 gconfd (gaby-4901): Adresse « xml:readwrite:/home/gaby/.gconf » résolue vers une source de configuration accessible en écriture à la position 0
Jan 29 12:13:09 prac-pc10 kernel: [17179736.508000] usb 3-5: new high speed USB device using ehci_hcd and address 7
Jan 29 12:13:10 prac-pc10 kernel: [17179737.052000] usb 3-5: new high speed USB device using ehci_hcd and address 8
Jan 29 12:13:10 prac-pc10 kernel: [17179737.596000] usb 3-5: new high speed USB device using ehci_hcd and address 9
Jan 29 12:13:11 prac-pc10 kernel: [17179738.116000] usb 3-5: new high speed USB device using ehci_hcd and address 10

Il semble qu'il y ai plusieurs tentatives d'adressage au périphèrique

:~ $ dmesg 

[17179569.184000] Linux version 2.6.17-10-386 (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Tue Dec 5 22:26:18 UTC 2006 (Ubuntu 2.6.17-10.34-386)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
[17179569.184000]  BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 262140
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 32764 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ASUS                                  ) @ 0x000f5770
[17179569.184000] ACPI: RSDT (v001 ASUS   P4S8X-X  0x42302e31 MSFT 0x31313031) @ 0x3fffc000
[17179569.184000] ACPI: FADT (v001 ASUS   P4S8X-X  0x42302e31 MSFT 0x31313031) @ 0x3fffc0c0
[17179569.184000] ACPI: BOOT (v001 ASUS   P4S8X-X  0x42302e31 MSFT 0x31313031) @ 0x3fffc030
[17179569.184000] ACPI: MADT (v001 ASUS   P4S8X-X  0x42302e31 MSFT 0x31313031) @ 0x3fffc058
[17179569.184000] ACPI: DSDT (v001   ASUS P4S8X-X  0x00001000 MSFT 0x0100000b) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0xe408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:2 APIC version 20
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 128, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=UUID=dcc2c9e5-4598-4ee4-9065-0beb93d1c51e ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 2666.686 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179571.880000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179571.880000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.904000] Memory: 1028584k/1048560k available (1829k kernel code, 19256k reserved, 1038k data, 288k init, 131056k highmem)
[17179571.904000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179571.984000] Calibrating delay using timer specific routine.. 5338.77 BogoMIPS (lpj=10677549)
[17179571.984000] Security Framework v1.0.0 initialized
[17179571.984000] SELinux:  Disabled at boot.
[17179571.984000] Mount-cache hash table entries: 512
[17179571.984000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[17179571.984000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[17179571.984000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[17179571.984000] CPU: L2 cache: 512K
[17179571.984000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
[17179571.984000] CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07
[17179571.984000] Checking 'hlt' instruction... OK.
[17179572.000000] SMP alternatives: switching to UP code
[17179572.000000] Freeing SMP alternatives: 0k freed
[17179572.000000] checking if image is initramfs... it is
[17179572.564000] Freeing initrd memory: 6692k freed
[17179572.564000] ACPI: Core revision 20060707
[17179572.568000] ACPI: Looking for DSDT ... not found!
[17179572.568000] ENABLING IO-APIC IRQs
[17179572.568000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179572.712000] NET: Registered protocol family 16
[17179572.712000] EISA bus registered
[17179572.712000] ACPI: bus type pci registered
[17179572.712000] PCI: PCI BIOS revision 2.10 entry at 0xf10f0, last bus=1
[17179572.712000] PCI: Using configuration type 1
[17179572.712000] Setting up standard PCI resources
[17179572.724000] ACPI: Interpreter enabled
[17179572.724000] ACPI: Using IOAPIC for interrupt routing
[17179572.724000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179572.724000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179572.724000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179572.724000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179572.724000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179572.724000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
[17179572.724000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179572.724000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179572.724000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179572.724000] PCI: Probing PCI hardware (bus 00)
[17179572.724000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179572.732000] Enabling SiS 96x SMBus.
[17179572.732000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
[17179572.732000] Boot video device is 0000:01:00.0
[17179572.732000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179572.732000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[17179572.736000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179572.736000] pnp: PnP ACPI init
[17179572.740000] pnp: PnP ACPI: found 15 devices
[17179572.740000] PnPBIOS: Disabled by ACPI PNP
[17179572.740000] PCI: Using ACPI for IRQ routing
[17179572.740000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179572.748000] pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved
[17179572.748000] pnp: 00:02: ioport range 0xe480-0xe4ff has been reserved
[17179572.748000] pnp: 00:02: ioport range 0xe600-0xe61f has been reserved
[17179572.748000] pnp: 00:02: ioport range 0x480-0x48f has been reserved
[17179572.748000] pnp: 00:0e: ioport range 0x295-0x296 has been reserved
[17179572.748000] PCI: Bridge: 0000:00:01.0
[17179572.748000]   IO window: disabled.
[17179572.748000]   MEM window: df000000-dfffffff
[17179572.748000]   PREFETCH window: eff00000-febfffff
[17179572.748000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179572.748000] NET: Registered protocol family 2
[17179572.788000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179572.788000] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[17179572.788000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179572.788000] TCP: Hash tables configured (established 131072 bind 65536)
[17179572.788000] TCP reno registered
[17179572.788000] Simple Boot Flag at 0x3a set to 0x1
[17179572.788000] audit: initializing netlink socket (disabled)
[17179572.788000] audit(1170069028.788:1): initialized
[17179572.788000] highmem bounce pool size: 64 pages
[17179572.788000] VFS: Disk quotas dquot_6.5.1
[17179572.788000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179572.788000] Initializing Cryptographic API
[17179572.788000] io scheduler noop registered
[17179572.788000] io scheduler anticipatory registered
[17179572.788000] io scheduler deadline registered
[17179572.788000] io scheduler cfq registered (default)
[17179572.788000] isapnp: Scanning for PnP cards...
[17179573.144000] isapnp: No Plug & Play device found
[17179573.164000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179573.164000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.164000] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.164000] mice: PS/2 mouse device common for all mice
[17179573.164000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179573.164000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.164000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179573.164000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179573.164000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179574.184000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179574.184000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179574.184000] EISA: Probing bus 0 at eisa.0
[17179574.184000] EISA: Detected 0 cards.
[17179574.184000] TCP bic registered
[17179574.184000] NET: Registered protocol family 1
[17179574.184000] NET: Registered protocol family 8
[17179574.184000] NET: Registered protocol family 20
[17179574.184000] Using IPI Shortcut mode
[17179574.184000] ACPI: (supports S0 S1 S4 S5)
[17179574.188000] Freeing unused kernel memory: 288k freed
[17179574.344000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179575.268000] Capability LSM initialized
[17179575.304000] ACPI: Invalid PBLK length [5]
[17179575.304000] ACPI: Getting cpuindex for acpiid 0x1
[17179575.748000] SIS5513: IDE controller at PCI slot 0000:00:02.5
[17179575.748000] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 177
[17179575.748000] SIS5513: chipset revision 0
[17179575.748000] SIS5513: not 100% native mode: will probe irqs later
[17179575.748000] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
[17179575.748000]     ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio
[17179575.748000]     ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:pio, hdd:DMA
[17179575.748000] Probing IDE interface ide0...
[17179576.036000] hda: ExcelStor Technology J680, ATA DISK drive
[17179576.708000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.716000] Probing IDE interface ide1...
[17179577.732000] hdd: SAMSUNG CD-ROM SC-152A, ATAPI CD/DVD-ROM drive
[17179577.788000] ide1 at 0x170-0x177,0x376 on irq 15
[17179577.792000] hda: max request size: 512KiB
[17179577.800000] hda: 160836480 sectors (82348 MB) w/1794KiB Cache, CHS=16383/255/63, UDMA(100)
[17179577.800000] hda: cache flushes supported
[17179577.800000]  hda: hda1 hda2 < hda5 >
[17179577.844000] hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
[17179577.844000] Uniform CD-ROM driver Revision: 3.20
[17179578.048000] usbcore: registered new driver usbfs
[17179578.048000] usbcore: registered new driver hub
[17179578.048000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179578.048000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 169
[17179578.048000] ohci_hcd 0000:00:03.0: OHCI Host Controller
[17179578.048000] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[17179578.064000] ohci_hcd 0000:00:03.0: irq 169, io mem 0xde800000
[17179578.120000] usb usb1: configuration #1 chosen from 1 choice
[17179578.120000] hub 1-0:1.0: USB hub found
[17179578.120000] hub 1-0:1.0: 3 ports detected
[17179578.224000] ACPI: PCI Interrupt 0000:00:03.1[b] -> GSI 21 (level, low) -> IRQ 185
[17179578.224000] ohci_hcd 0000:00:03.1: OHCI Host Controller
[17179578.224000] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[17179578.240000] ohci_hcd 0000:00:03.1: irq 185, io mem 0xde000000
[17179578.296000] usb usb2: configuration #1 chosen from 1 choice
[17179578.296000] hub 2-0:1.0: USB hub found
[17179578.296000] hub 2-0:1.0: 3 ports detected
[17179578.408000] PCI: Enabling device 0000:00:03.2 (0004 -> 0006)
[17179578.408000] ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 193
[17179578.408000] ehci_hcd 0000:00:03.2: EHCI Host Controller
[17179578.408000] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[17179578.408000] PCI: cache line size of 128 is not supported by device 0000:00:03.2
[17179578.408000] ehci_hcd 0000:00:03.2: irq 193, io mem 0xdd800000
[17179578.408000] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179578.408000] usb usb3: configuration #1 chosen from 1 choice
[17179578.408000] hub 3-0:1.0: USB hub found
[17179578.408000] hub 3-0:1.0: 6 ports detected
[17179578.724000] kjournald starting.  Commit interval 5 seconds
[17179578.724000] EXT3-fs: mounted filesystem with ordered data mode.
[17179579.152000] usb 3-4: new high speed USB device using ehci_hcd and address 3
[17179579.264000] usb 3-4: device descriptor read/64, error -32
[17179579.480000] usb 3-4: device descriptor read/64, error -32
[17179579.696000] usb 3-4: new high speed USB device using ehci_hcd and address 4
[17179579.808000] usb 3-4: device descriptor read/64, error -32
[17179580.024000] usb 3-4: device descriptor read/64, error -32
[17179580.240000] usb 3-4: new high speed USB device using ehci_hcd and address 5
[17179580.648000] usb 3-4: device not accepting address 5, error -32
[17179580.760000] usb 3-4: new high speed USB device using ehci_hcd and address 6
[17179581.168000] usb 3-4: device not accepting address 6, error -32
[17179581.472000] usb 1-2: new low speed USB device using ohci_hcd and address 3
[17179581.684000] usb 1-2: configuration #1 chosen from 1 choice
[17179589.740000] Real Time Clock Driver v1.12ac
[17179590.100000] Linux agpgart interface v0.101 (c) Dave Jones
[17179590.160000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179590.368000] agpgart: Detected SiS 648 chipset
[17179590.376000] agpgart: AGP aperture is 128M @ 0xe0000000
[17179590.456000] parport: PnPBIOS parport detected.
[17179590.456000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[17179590.476000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179590.532000] usbcore: registered new driver hiddev
[17179590.544000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
[17179590.544000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.0-2
[17179590.544000] usbcore: registered new driver usbhid
[17179590.544000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179590.544000] input: PC Speaker as /class/input/input2
[17179590.584000] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600
[17179590.620000] Floppy drive(s): fd0 is 1.44M
[17179590.644000] FDC 0 is a post-1991 82077
[17179590.708000] sis900.c: v1.08.09 Sep. 19 2005
[17179590.708000] PCI: Enabling device 0000:00:04.0 (0004 -> 0007)
[17179590.708000] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 201
[17179590.712000] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[17179590.728000] 0000:00:04.0: Using transceiver found at address 1 as default
[17179590.732000] eth0: SiS 900 PCI Fast Ethernet at 0x9800, IRQ 201, 00:0c:6e:99:02:0b.
[17179590.924000] ts: Compaq touchscreen protocol output
[17179590.996000] PCI: Enabling device 0000:00:02.7 (0004 -> 0005)
[17179590.996000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 209
[17179591.024000] nvidia: module license 'NVIDIA' taints kernel.
[17179591.356000] AC'97 0 analog subsections not ready
[17179591.420000] intel8x0_measure_ac97_clock: measured 52321 usecs
[17179591.420000] intel8x0: clocking to 48000
[17179591.428000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
[17179591.428000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-8776  Mon Oct 16 21:56:04 PDT 2006
[17179591.808000] lp0: using parport0 (interrupt-driven).
[17179591.876000] Adding 3028212k swap on /dev/disk/by-uuid/43f31ba6-91ca-4f13-b01c-328012c42b92.  Priority:-1 extents:1 across:3028212k
[17179591.944000] EXT3 FS on hda1, internal journal
[17179592.124000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179592.124000] md: bitmap version 4.39
[17179592.164000] NET: Registered protocol family 17
[17179592.344000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
[17179593.128000] eth0: Media Link On 100mbps full-duplex 
[17179598.888000] ACPI: Power Button (FF) [PWRF]
[17179598.888000] ACPI: Power Button (CM) [PWRB]
[17179598.984000] ibm_acpi: ec object not found
[17179599.012000] pcc_acpi: loading...
[17179599.436000] acpi_cpufreq: Unknown symbol cpu_online_map
[17179599.456000] NET: Registered protocol family 10
[17179599.456000] lo: Disabled Privacy Extensions
[17179599.456000] IPv6 over IPv4 tunneling driver
[17179602.868000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[17179602.868000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17179602.868000] agpgart: SiS delay workaround: giving bridge time to recover.
[17179602.884000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17179606.964000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179606.964000] apm: overridden by ACPI.
[17179609.704000] eth0: no IPv6 routers present
[17179614.660000] Bluetooth: Core ver 2.8
[17179614.660000] NET: Registered protocol family 31
[17179614.660000] Bluetooth: HCI device and connection manager initialized
[17179614.660000] Bluetooth: HCI socket layer initialized
[17179614.672000] Bluetooth: L2CAP ver 2.8
[17179614.672000] Bluetooth: L2CAP socket layer initialized
[17179614.724000] Bluetooth: HIDP (Human Interface Emulation) ver 1.1-mh1
[17179614.740000] Bluetooth: RFCOMM socket layer initialized
[17179614.740000] Bluetooth: RFCOMM TTY layer initialized
[17179614.740000] Bluetooth: RFCOMM ver 1.7
[17179736.508000] usb 3-5: new high speed USB device using ehci_hcd and address 7
[17179736.620000] usb 3-5: device descriptor read/64, error -32
[17179736.836000] usb 3-5: device descriptor read/64, error -32
[17179737.052000] usb 3-5: new high speed USB device using ehci_hcd and address 8
[17179737.164000] usb 3-5: device descriptor read/64, error -32
[17179737.380000] usb 3-5: device descriptor read/64, error -32
[17179737.596000] usb 3-5: new high speed USB device using ehci_hcd and address 9
[17179738.004000] usb 3-5: device not accepting address 9, error -32
[17179738.116000] usb 3-5: new high speed USB device using ehci_hcd and address 10
[17179738.524000] usb 3-5: device not accepting address 10, error -32

Toutes ces tentatives semble vaines.

Je ne trouve pas d'information sur cette

error -32

Je me permet donc de soliciter votre aide.

Merci d'avance

Dernière modification par konandrum (Le 29/01/2007, à 15:00)

konandrum

Re : Problème installation de Périphèriques externe USB [Resolu]

J'ai résolu mon problème.
Je poste la solution :

Il faut enlever le module ehci-hcd du noyau

sudo rmmod ehci-hcd