Ubuntu-fr

cocoLeNain

Configuration TV out, image qui tremble

Bonjour à tous

Je possède une carde nvidia 7600GT. J'ai installé l'accélération 3D et comme j'ai une TV connectée à cette carte je souhaite pouvoir des divx depuis ubuntu 6.10 sur ma TV. J'ai donc suivi le tuto de ubuntu, et là je rencontre deux problèmes :
     1) je n'ai que l'image sur ma TV, pas sur mon CRT 17''
     2) l'image que j'ai sur ma TV fait que trembler

voici mon fichier xorg.conf

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	FontPath	"/usr/share/fonts/X11/misc"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"NVIDIA Corporation NVIDIA Default Card"
	Driver		"nvidia"
	BusID		"PCI:7:0:0"
	Option "DPMS"
	Option "NoLogo" "true"
	Option "ConnectedMonitor" "TV"
	Option "TwinView" "true"
	Option "SecondMonitorHorizSync" "30-50"
	Option "SecondMonitorVertRefresh" "60"
	Option "MetaModes" "1024x768, 800x600;"
	Option "TwinViewOrientation" "Clone"
	Option "TVStandard" "PAL-N"
	Option "TVOutFormat" "SVIDEO"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
	HorizSync	28-51
	VertRefresh	43-60
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"NVIDIA Corporation NVIDIA Default Card"
	Monitor		"Generic Monitor"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024""1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

Donc si quelqu'un a une idée pour résoudre mes problèmes ...

Dernière modification par cocoLeNain (Le 23/02/2007, à 14:07)