#1 Le 01/03/2007, à 18:27
- Archaon59
Périphériques USB non détéctés, ainsi que le lecteur multicarte
Salut à tous !
Je viens d'installer Edgy sur un Athlon XP 1800+, sur une carte mère Soltek SL-75FRN-L avec une Geforce 4 Ti4200 . Tout marche bien, Beryl tourne super, mais au moment de brancher une clée USB paf ! ...
Rien ne se passe 
. Idem pour une carte compact flash dans le lecteur mutlicarte de l'ordi, rien n'est detecté .
Pourtant dans le gestionnaire de périphérique je peux voir 3 "nForce 2 USB controller" .
Help !
Merci d'avance 
!
Edit : J'ai tapé un dmesg dans une console avec la clée branchée, ça donne
[17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Thu Feb 1 19:52:28 UTC 2007 (Ubuntu 2.6.17-11.35-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[17179569.184000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 511MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 131056
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 126960 pages, LIFO batch:31
[17179569.184000] DMI 2.2 present.
[17179569.184000] ACPI: RSDP (v000 Nvidia ) @ 0x000f70e0
[17179569.184000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
[17179569.184000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
[17179569.184000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff7bc0
[17179569.184000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:8 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored.
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hdc1 ro quiet splash locale=fr_FR
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 1503.527 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.300000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.300000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179569.316000] Memory: 509792k/524224k available (1911k kernel code, 13908k reserved, 1073k data, 308k init, 0k highmem)
[17179569.316000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.396000] Calibrating delay using timer specific routine.. 3010.64 BogoMIPS (lpj=6021294)
[17179569.396000] Security Framework v1.0.0 initialized
[17179569.396000] SELinux: Disabled at boot.
[17179569.396000] Mount-cache hash table entries: 512
[17179569.396000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179569.396000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179569.396000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179569.396000] CPU: L2 Cache: 256K (64 bytes/line)
[17179569.396000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[17179569.396000] Checking 'hlt' instruction... OK.
[17179569.412000] SMP alternatives: switching to UP code
[17179569.412000] Freeing SMP alternatives: 16k freed
[17179569.412000] checking if image is initramfs... it is
[17179570.044000] Freeing initrd memory: 5624k freed
[17179570.044000] ACPI: Core revision 20060707
[17179570.052000] ACPI: Looking for DSDT ... not found!
[17179570.068000] CPU0: AMD Athlon(tm) XP 1800+ stepping 01
[17179570.068000] Total of 1 processors activated (3010.64 BogoMIPS).
[17179570.068000] ENABLING IO-APIC IRQs
[17179570.068000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179570.212000] Brought up 1 CPUs
[17179570.212000] migration_cost=0
[17179570.212000] NET: Registered protocol family 16
[17179570.212000] EISA bus registered
[17179570.212000] ACPI: bus type pci registered
[17179570.212000] PCI: PCI BIOS revision 2.10 entry at 0xfb510, last bus=2
[17179570.212000] PCI: Using configuration type 1
[17179570.212000] Setting up standard PCI resources
[17179570.220000] ACPI: Interpreter enabled
[17179570.220000] ACPI: Using IOAPIC for interrupt routing
[17179570.220000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.220000] PCI: Probing PCI hardware (bus 00)
[17179570.228000] PCI: nForce2 C1 Halt Disconnect fixup
[17179570.228000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:09.0
[17179570.228000] Boot video device is 0000:02:00.0
[17179570.228000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.316000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179570.316000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[17179570.320000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.320000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.320000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.320000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179570.320000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.320000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179570.324000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179570.324000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179570.324000] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.324000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179570.324000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.324000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179570.324000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179570.324000] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.328000] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.328000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.328000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[17179570.328000] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[17179570.328000] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[17179570.328000] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[17179570.328000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[17179570.328000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[17179570.332000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[17179570.332000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[17179570.332000] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[17179570.332000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[17179570.332000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[17179570.332000] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[17179570.332000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[17179570.332000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[17179570.336000] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[17179570.336000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[17179570.340000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.340000] pnp: PnP ACPI init
[17179570.348000] pnp: PnP ACPI: found 17 devices
[17179570.348000] PnPBIOS: Disabled by ACPI PNP
[17179570.348000] PCI: Using ACPI for IRQ routing
[17179570.348000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179570.400000] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[17179570.400000] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[17179570.400000] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[17179570.400000] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[17179570.400000] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[17179570.400000] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[17179570.400000] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[17179570.400000] pnp: 00:01: ioport range 0x5100-0x513f has been reserved
[17179570.400000] PCI: Bridge: 0000:00:08.0
[17179570.400000] IO window: disabled.
[17179570.400000] MEM window: disabled.
[17179570.400000] PREFETCH window: disabled.
[17179570.400000] PCI: Bridge: 0000:00:1e.0
[17179570.400000] IO window: disabled.
[17179570.400000] MEM window: ec000000-edffffff
[17179570.400000] PREFETCH window: e0000000-e7ffffff
[17179570.400000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[17179570.400000] NET: Registered protocol family 2
[17179570.440000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179570.440000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[17179570.440000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[17179570.440000] TCP: Hash tables configured (established 16384 bind 8192)
[17179570.440000] TCP reno registered
[17179570.440000] audit: initializing netlink socket (disabled)
[17179570.440000] audit(1172765014.440:1): initialized
[17179570.440000] VFS: Disk quotas dquot_6.5.1
[17179570.440000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.440000] Initializing Cryptographic API
[17179570.440000] io scheduler noop registered
[17179570.440000] io scheduler anticipatory registered
[17179570.440000] io scheduler deadline registered
[17179570.440000] io scheduler cfq registered (default)
[17179570.440000] isapnp: Scanning for PnP cards...
[17179570.796000] isapnp: No Plug & Play device found
[17179570.824000] Real Time Clock Driver v1.12ac
[17179570.824000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179570.824000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.824000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179570.828000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.828000] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179570.828000] mice: PS/2 mouse device common for all mice
[17179570.828000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179570.828000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179570.828000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179570.828000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179570.832000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179570.832000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179570.832000] EISA: Probing bus 0 at eisa.0
[17179570.832000] Cannot allocate resource for EISA slot 4
[17179570.832000] Cannot allocate resource for EISA slot 5
[17179570.832000] EISA: Detected 0 cards.
[17179570.832000] TCP bic registered
[17179570.832000] NET: Registered protocol family 1
[17179570.832000] NET: Registered protocol family 8
[17179570.832000] NET: Registered protocol family 20
[17179570.832000] Using IPI No-Shortcut mode
[17179570.832000] ACPI: (supports S0 S1 S4 S5)
[17179570.832000] Freeing unused kernel memory: 308k freed
[17179570.864000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.980000] Capability LSM initialized
[17179572.020000] ACPI: Fan [FAN] (on)
[17179572.028000] ACPI: Thermal Zone [THRM] (34 C)
[17179572.672000] SCSI subsystem initialized
[17179572.672000] libata version 1.20 loaded.
[17179572.676000] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[17179572.676000] NFORCE2: chipset revision 162
[17179572.676000] NFORCE2: not 100% native mode: will probe irqs later
[17179572.676000] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
[17179572.676000] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[17179572.676000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[17179572.676000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[17179572.676000] Probing IDE interface ide0...
[17179573.412000] hda: LITE-ON DVDRW LDW-451S, ATAPI CD/DVD-ROM drive
[17179574.196000] hdb: SAMSUNG DVD-ROM SD-616E, ATAPI CD/DVD-ROM drive
[17179574.252000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.252000] Probing IDE interface ide1...
[17179574.540000] hdc: Maxtor 6Y080L0, ATA DISK drive
[17179575.212000] ide1 at 0x170-0x177,0x376 on irq 15
[17179575.244000] hda: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179575.244000] Uniform CD-ROM driver Revision: 3.20
[17179575.248000] hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
[17179575.256000] hdc: max request size: 128KiB
[17179575.268000] hdc: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[17179575.272000] hdc: cache flushes supported
[17179575.272000] hdc: hdc1 hdc2 hdc3
[17179575.576000] usbcore: registered new driver usbfs
[17179575.576000] usbcore: registered new driver hub
[17179575.580000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179575.580000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[17179575.580000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 177
[17179575.580000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179575.580000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[17179575.580000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[17179575.580000] ohci_hcd 0000:00:02.0: irq 177, io mem 0xee004000
[17179575.636000] usb usb1: configuration #1 chosen from 1 choice
[17179575.636000] hub 1-0:1.0: USB hub found
[17179575.636000] hub 1-0:1.0: 3 ports detected
[17179575.740000] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[17179575.740000] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 185
[17179575.740000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[17179575.740000] ohci_hcd 0000:00:02.1: OHCI Host Controller
[17179575.740000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[17179575.740000] ohci_hcd 0000:00:02.1: irq 185, io mem 0xee005000
[17179575.796000] usb usb2: configuration #1 chosen from 1 choice
[17179575.796000] hub 2-0:1.0: USB hub found
[17179575.796000] hub 2-0:1.0: 3 ports detected
[17179575.924000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[17179575.924000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 193
[17179575.924000] PCI: Setting latency timer of device 0000:00:02.2 to 64
[17179575.924000] ehci_hcd 0000:00:02.2: EHCI Host Controller
[17179575.924000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[17179575.924000] ehci_hcd 0000:00:02.2: selective suspend/wakeup unavailable
[17179575.924000] ehci_hcd 0000:00:02.2: debug port 1
[17179575.928000] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[17179575.928000] ehci_hcd 0000:00:02.2: irq 193, io mem 0xee000000
[17179575.928000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179575.928000] usb usb3: configuration #1 chosen from 1 choice
[17179575.928000] hub 3-0:1.0: USB hub found
[17179575.928000] hub 3-0:1.0: 6 ports detected
[17179576.100000] Attempting manual resume
[17179576.140000] kjournald starting. Commit interval 5 seconds
[17179576.140000] EXT3-fs: mounted filesystem with ordered data mode.
[17179576.304000] ohci_hcd 0000:00:02.0: wakeup
[17179576.688000] usb 1-3: new full speed USB device using ohci_hcd and address 3
[17179576.908000] usb 1-3: configuration #1 chosen from 1 choice
[17179585.716000] Linux agpgart interface v0.101 (c) Dave Jones
[17179585.736000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[17179585.736000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100
[17179585.832000] agpgart: Detected NVIDIA nForce2 chipset
[17179585.840000] agpgart: AGP aperture is 64M @ 0xe8000000
[17179586.000000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179586.044000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179586.176000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
[17179586.180000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[17179586.180000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 177
[17179586.180000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[17179586.324000] parport: PnPBIOS parport detected.
[17179586.324000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[17179586.700000] eth0: forcedeth.c: subsystem: 010de:0c11 bound to 0000:00:04.0
[17179586.788000] Floppy drive(s): fd0 is 1.44M
[17179586.796000] input: PC Speaker as /class/input/input1
[17179586.912000] FDC 0 is a post-1991 82077
[17179586.936000] usbcore: registered new driver libusual
[17179586.996000] Initializing USB Mass Storage driver...
[17179587.068000] eth0: no link during initialization.
[17179587.236000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
[17179587.420000] nvidia: module license 'NVIDIA' taints kernel.
[17179587.680000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[17179587.680000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 201
[17179587.680000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006
[17179587.688000] ts: Compaq touchscreen protocol output
[17179587.796000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
[17179587.796000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 185
[17179587.796000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[17179588.096000] NET: Registered protocol family 17
[17179588.116000] intel8x0_measure_ac97_clock: measured 52595 usecs
[17179588.116000] intel8x0: clocking to 47484
[17179588.308000] lp0: using parport0 (interrupt-driven).
[17179588.356000] Adding 530136k swap on /dev/disk/by-uuid/27c2d694-473d-4252-bb52-5990a1840c20. Priority:-1 extents:1 across:530136k
[17179588.428000] EXT3 FS on hdc1, internal journal
[17179588.664000] kjournald starting. Commit interval 5 seconds
[17179588.672000] EXT3 FS on hdc3, internal journal
[17179588.672000] EXT3-fs: mounted filesystem with ordered data mode.
[17179588.776000] eth0: link up.
[17179594.692000] ACPI: Power Button (FF) [PWRF]
[17179594.692000] ACPI: Power Button (CM) [PWRB]
[17179594.832000] ibm_acpi: ec object not found
[17179594.872000] pcc_acpi: loading...
[17179596.944000] NET: Registered protocol family 10
[17179596.944000] lo: Disabled Privacy Extensions
[17179596.944000] IPv6 over IPv4 tunneling driver
[17179597.988000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[17179597.988000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17179597.988000] agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
[17179599.088000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179599.088000] apm: overridden by ACPI.
[17179604.172000] Bluetooth: Core ver 2.8
[17179604.172000] NET: Registered protocol family 31
[17179604.172000] Bluetooth: HCI device and connection manager initialized
[17179604.172000] Bluetooth: HCI socket layer initialized
[17179604.188000] Bluetooth: L2CAP ver 2.8
[17179604.188000] Bluetooth: L2CAP socket layer initialized
[17179607.348000] eth0: no IPv6 routers present
[17180224.680000] usb 3-2: new high speed USB device using ehci_hcd and address 3
[17180230.812000] usb 3-2: unable to read config index 0 descriptor/all
[17180230.812000] usb 3-2: can't read configurations, error -110
[17180230.924000] usb 3-2: new high speed USB device using ehci_hcd and address 4
[17180236.064000] usb 3-2: configuration #1 chosen from 1 choice
[17180248.128000] usb 3-2: USB disconnect, address 4
[17180254.920000] usb 3-4: new high speed USB device using ehci_hcd and address 5
[17180256.060000] usb 3-4: configuration #1 chosen from 1 choice
[17180284.936000] usb 3-4: USB disconnect, address 5
[17180299.036000] usb 3-1: new high speed USB device using ehci_hcd and address 6
[17180300.168000] usb 3-1: configuration #1 chosen from 1 choice
[17180394.304000] usb 3-1: USB disconnect, address 6
[17180397.568000] usb 3-1: new high speed USB device using ehci_hcd and address 7
[17180397.704000] usb 3-1: configuration #1 chosen from 1 choice
[17180411.440000] usb 3-1: USB disconnect, address 7
[17180415.208000] usb 3-2: new high speed USB device using ehci_hcd and address 8
[17180415.344000] usb 3-2: configuration #1 chosen from 1 choice
[17180426.308000] usb 3-2: USB disconnect, address 8
[17180430.580000] usb 3-4: new high speed USB device using ehci_hcd and address 9
[17180430.716000] usb 3-4: configuration #1 chosen from 1 choice
[17180433.616000] usb 3-4: USB disconnect, address 9
[17180449.228000] usb 3-2: new high speed USB device using ehci_hcd and address 10
[17180449.364000] usb 3-2: configuration #1 chosen from 1 choice
[17180465.620000] usb 3-2: USB disconnect, address 10
[17180471.656000] usb 3-1: new high speed USB device using ehci_hcd and address 11
[17180471.792000] usb 3-1: configuration #1 chosen from 1 choice
[17180478.976000] usb 3-1: USB disconnect, address 11
[17181095.144000] usb 3-4: new high speed USB device using ehci_hcd and address 12
[17181095.280000] usb 3-4: configuration #1 chosen from 1 choiceDernière modification par Archaon59 (Le 01/03/2007, à 18:30)
"La théorie, c'est quand on sait tout et que rien ne fonctionne. La pratique, c'est quand tout fonctionne et que personne ne sait pourquoi. Ici, nous avons réuni théorie et pratique : Rien ne fonctionne... et personne ne sait pourquoi !"
-Albert Einstein
Hors ligne