Ubuntu-fr

Iavderf2

Probleme de lancement beryl

Bonjour, me voici face a un probleme :

Je vien d'installer beryl en suivant le tuto suivant : http://doc.ubuntu-fr.org/beryl

Apres une installation sans soucis, voici mon probleme

iavderf@iavderf-desktop:~$ beryl
**************************************************************
* Beryl system compatiblity check                            *
**************************************************************

Detected xserver                                : NVIDIA

Checking Display :0.0 ...

Checking for XComposite extension               : passed (v0.3)
Checking for XDamage extension                  : passed
Checking for RandR extension                    : failed

No RandR extension
iavderf@iavderf-desktop:~$

Bien-entendu vous avez pu deviner que beryl ne ce lance pas

Apres quelques recherches, j'ai pu remarquer que mon probleme venais de mon dualscreen, effectivement apres avoir désactivé le second ecran le test beryl fonctionne, celui-ci se lanse (sans les bares de titre mais ceci est un autre problemes), donc j'en conclu que mon fichier xorg.conf est foireux, je vous poste celui-ci

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Mon Oct 16 22:13:07 PDT 2006

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
  Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
  screen 1 "screen1" rightof "Default Screen"
  InputDevice "Generic Keyboard"
  InputDevice "Configured Mouse"
  InputDevice "stylus" "SendCoreEvents"
  InputDevice "cursor" "SendCoreEvents"
  InputDevice "eraser" "SendCoreEvents"
EndSection

Section "Files"
  
  # path to defoma fonts
  FontPath "/usr/share/X11/fonts/misc"
  FontPath "/usr/share/X11/fonts/cyrillic"
  FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
  FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
  FontPath "/usr/share/X11/fonts/Type1"
  FontPath "/usr/share/X11/fonts/100dpi"
  FontPath "/usr/share/X11/fonts/75dpi"
  FontPath "/usr/share/fonts/X11/misc"
  FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
  Load "i2c"
  Load "bitmap"
  Load "ddc"
  Load "extmod"
  Load "freetype"
  Load "int10"
  Load "type1"
  Load "vbe"
  load "glx"
  load "v4l"
EndSection

Section "InputDevice"
  Identifier "Generic Keyboard"
  Driver "kbd"
  option "CoreKeyboard"
  option "XkbRules" "xorg"
  option "XkbModel" "pc105"
  option "XkbLayout" "be"
  option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
  Identifier "Configured Mouse"
  Driver "mouse"
  option "CorePointer"
  option "Device" "/dev/input/mice"
  option "Protocol" "ExplorerPS/2"
  option "ZAxisMapping" "4 5"
  option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
  
  # /dev/input/event
  # for USB
  Identifier "stylus"
  Driver "wacom"
  option "Device" "/dev/wacom"# Change to 
  option "Type" "stylus"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
  
  # /dev/input/event
  # for USB
  Identifier "eraser"
  Driver "wacom"
  option "Device" "/dev/wacom"# Change to 
  option "Type" "eraser"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
  
  # /dev/input/event
  # for USB
  Identifier "cursor"
  Driver "wacom"
  option "Device" "/dev/wacom"# Change to 
  option "Type" "cursor"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
  identifier "Generic Monitor"
  vendorname "Generic"
  modelname "1280x1024 @ 60 Hz"
  HorizSync 31.5-64.3
  VertRefresh 50-70
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x768@54" 64.995 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
  modeline  "1280x854" 80.0 1280 1309 1460 1636 854 857 864 896 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  gamma 1.0
EndSection

Section "Device"
  identifier "NVIDIA Corporation NVIDIA Default Card"
  boardname "nv"
  busid "PCI:1:0:0"
  driver "nvidia"
  screen 0
EndSection

Section "Screen"
  Identifier "Default Screen"
  Device "NVIDIA Corporation NVIDIA Default Card"
  Monitor "Generic Monitor"
  DefaultDepth 24
  SubSection "Display"
    depth 24
    virtual 1280 1024
    modes "1280x1024@60" "1280x960@60" "1280x854" "1152x768@54" "1024x768@60" "1024x768@70" "800x600@60" "800x600@56" "640x480@60"
  EndSubSection
EndSection

Section "device" #      
  identifier "device1"
  boardname "nv"
  busid "PCI:1:0:0"
  driver "nvidia"
  screen 1
EndSection
Section "screen" #      
  identifier "screen1"
  device "device1"
  defaultdepth 24
  monitor "monitor1"
  SubSection "Display"
    depth 24
    modes "1280x1024@60" "1280x960@60" "1280x854" "1152x768@54" "1024x768@60" "1024x768@70" "800x600@60" "800x600@56" "640x480@60"
  EndSubSection
EndSection
Section "monitor" #      
  identifier "monitor1"
  vendorname "Generic"
  modelname "1280x1024 @ 60 Hz"
  HorizSync 31.5-64.3
  VertRefresh 50-70
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x768@54" 64.995 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
  modeline  "1280x854" 80.0 1280 1309 1460 1636 854 857 864 896 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  gamma 1.0
EndSection
Section "ServerFlags"
  option "Xinerama" "true"
EndSection

Ce fichier xorg.conf a été fait par la config automatique de kubuntu pourriez vous y jeter un oeil

Pour info je tourne sous kubuntu Edgy avec une Geforce 7900 GT
Mes pilotes sont visiblement bien installé vu le fonctionnement d'aplications 3D et meme Jeux (Wow, Cs...)

D'avance je vous remercie

SimiBaN

Re : Probleme de lancement beryl

Ton xorg.conf est tellement different du mien, qui tourne pourtant egalement sous Edgy, avec une 7900GT, la seule difference est que je suis sous Ubuntu et non sous Kubuntu comme toi.
Donc si mon xorg.conf peut te servir, il est à ta disposition

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder3)  Fri Dec 15 10:13:06 PST 2006

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
    RgbPath         "/usr/lib/X11/rgb"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ExplorerPS/2"
    Option         "Emulate3Buttons" "no"
    Option         "Buttons" "7"
    Option         "ZAxisMapping" "4 5"
    Option         "ButtonMapping" "1 2 3 6 7"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc105"
    Option        "XkbLayout"    "fr"
    Option        "XkbVariant"    "latin9"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Iiyama PLE435S"
    HorizSync       60.0 - 82.0
    VertRefresh     140.0 - 170.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 7900 GT/GTO"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "1"
    Option         "metamodes" "CRT-0: 1280x1024_75 +0+0, CRT-1: 1280x1024_75 +1280+0; CRT-0: 1152x864 +0+0, CRT-1: nvidia-auto-select +1152+0; CRT-0: 1024x768 +0+0, CRT-1: nvidia-auto-select +1024+0; CRT-0: 832x624 +0+0, CRT-1: nvidia-auto-select +832+0; CRT-0: 800x600 +0+0, CRT-1: nvidia-auto-select +800+0; CRT-0: 640x480 +0+0, CRT-1: nvidia-auto-select +640+0"
    SubSection     "Display"
        Depth       24
        Modes      "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Pourtant je suis en Dualscreen comme toi.

Dernière modification par SimiBaN (Le 18/03/2007, à 06:53)

---

Partager, c'est donner...Mais, c'est aussi recevoir ;)

Yop.Solo

Re : Probleme de lancement beryl

Beryl ne fonctionne pas avec xinerama. Si je vois bien tu utilises deux moniteurs sur une nVidia. Dans ce cas, utilises twinview.