#101 Le 29/08/2005, à 20:48
- Saelynh
Re : [Info]Drivers ATi 8.16.20
esseye d'installer la version 4 de Gcc
[ http://www.dogmazic.net/saelynh _ http://www.jamendo.com/fr/artist/saelynh/ ]
Hors ligne
#102 Le 30/08/2005, à 13:15
- Nanal
Re : [Info]Drivers ATi 8.16.20
@bennohite : tu devrais préciser dans ton premier post qu'il est nécessaire d'installer le package build-essential pour réussir la maneouvre (de même que pour utiliser l'installeur de ATI) car il n'est pas mis par défaut. (je n'ai pas lu les 5 pages)
Avatar : "the mirror of the sun" by bernie (deviantart.com)
Hors ligne
#103 Le 31/08/2005, à 16:43
- Progs
Re : [Info]Drivers ATi 8.16.20
Bonjour,
j'ai un problème lors du make_install :
root@kadure:/lib/modules/fglrx# ./make_install.sh
- creating symlink
- recreating module dependency list
- trying a sample load of the kernel module
FATAL: Error inserting fglrx (/lib/modules/2.6.10-5-386/kernel/drivers/video/fglrx.ko): No such device
failed.Comment se fait-ce ?
Merci
#104 Le 31/08/2005, à 17:49
- Nanal
Re : [Info]Drivers ATi 8.16.20
Qqu'un utilise TVTime avec les derniers drivers ? Personnellement j'ai un message d'erreur et il ne veut pas démarrer.
xvoutput: No XVIDEO port found which supports YUY2 images.
Je n'ai pas encore fais de recherche mais dès que je trouve, je poste
Avatar : "the mirror of the sun" by bernie (deviantart.com)
Hors ligne
#105 Le 31/08/2005, à 23:10
- Saelynh
Re : [Info]Drivers ATi 8.16.20
moi j'ai une carte tuner masi aparement ya un module dasn le kernel qui merdouille alors j'aten la prochaine version 
[ http://www.dogmazic.net/saelynh _ http://www.jamendo.com/fr/artist/saelynh/ ]
Hors ligne
#106 Le 01/09/2005, à 14:45
- Valère
Re : [Info]Drivers ATi 8.16.20
J'ai enfin réussis à avoir les derniers drivers fonctionnels sur mon pc (9700pro) 
valere@ubuntu:~$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 PRO Generic
OpenGL version string: 1.3.5272 (X4.3.0-8.16.20)
valere@ubuntu:~$ fgl_glxgears
3745 frames in 5.0 seconds = 749.000 FPS
3748 frames in 5.0 seconds = 749.600 FPS
3738 frames in 5.0 seconds = 747.600 FPS
3728 frames in 5.0 seconds = 745.600 FPS
3745 frames in 5.0 seconds = 749.000 FPS
3717 frames in 5.0 seconds = 743.400 FPS
valere@ubuntu:~$ glxgears
19425 frames in 5.0 seconds = 3885.000 FPS
20560 frames in 5.0 seconds = 4112.000 FPS
20635 frames in 5.0 seconds = 4127.000 FPS
20635 frames in 5.0 seconds = 4127.000 FPS
20629 frames in 5.0 seconds = 4125.800 FPS
20631 frames in 5.0 seconds = 4126.200 FPS
Par contre sur le pc2 (radeon 8500), en suivant la même méthode, j'ai toujours le même problème de freeze 
1984 was not supposed to be an instruction manual
hostux.net serveur mail/jabber + hébergement d'images.
Hors ligne
#107 Le 01/09/2005, à 15:43
- Julian
Re : [Info]Drivers ATi 8.16.20
Par contre sur le pc2 (radeon 8500), en suivant la même méthode, j'ai toujours le même problème de freeze
Il doit y avoir un bug avec cette carte, j'ai une 8500 aussi et ça freeze, c'est inutilisable.
Si quelqu'un connaissait la solution (enfin s'il y en a une) ce serait sympa.
julian@jabber.fr
Hors ligne
#108 Le 01/09/2005, à 19:49
- oToKaR
Re : [Info]Drivers ATi 8.16.20
salut benohite
moi qui n'y connais pas encore grand chose, j'aimerai savoir si la 3D fonctionnera avec ma carte 9600 xt ??
et quel driver je dois charger,stp car yen a plusieurs..
Dernière modification par oToKaR (Le 01/09/2005, à 19:50)
« Être libre, ce n'est pas seulement se débarrasser de ses chaînes... c'est vivre d'une façon qui respecte et renforce la liberté des autres. » "Nelson Mandela"
Hors ligne
#109 Le 01/09/2005, à 20:05
- Saelynh
Re : [Info]Drivers ATi 8.16.20
otokar, pareil pour tt le monde je pense ^^
[ http://www.dogmazic.net/saelynh _ http://www.jamendo.com/fr/artist/saelynh/ ]
Hors ligne
#110 Le 02/09/2005, à 02:14
- MuZu
Re : [Info]Drivers ATi 8.16.20
Bonjour tout le monde 
Ca fait des jours ( des nuits... ) que j'essaye d'installer la version 8.16.20.
J'avais réussi sous mandrake et debian mais la ça marche pas et je comprends vraiment pas pourquoi.
j'ai une ati 9600 XT ou SE ( je sais plus , ca doit pas changer grand chose... ), sous ubuntu breezy, gcc3.4 ...
uname -r :
2.6.12-7-686cat /var/log/Xorg.0.log|grep fglrx:
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
(WW) fglrx: No matching Device section for instance (BusID PCI:3:0:1) found
(II) fglrx(0): pEnt->device->identifier=0x8213840
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) fglrx(0): PCI bus 3 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "CapabilitiesEx" "0x00000000"
(**) fglrx(0): Option "KernelModuleParm" "agplock=0"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "(null)"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "UseInternalAGPGART" "no"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(**) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "RADEON 9600 PRO (RV360 4152)" (Chipset = 0x4152)
(--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0x4022)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(--) fglrx(0): MMIO registers at 0xe6000000
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 131072 kB
(II) fglrx(0): VESA VBE OEM: ATI RADEON 9600 PRO
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: V350
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Connected Display1: CRT on primary DAC
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: PTS Model: 309 Serial#: 60107
(II) fglrx(0): Year: 2003 Week: 43
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
(II) fglrx(0): Gamma: 2.98
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.618 redY: 0.349 greenX: 0.280 greenY: 0.605
(II) fglrx(0): blueX: 0.152 blueY: 0.063 whiteX: 0.281 whiteY: 0.310
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #2: hsize: 800 vsize 600 refresh: 100 vid: 26693
(II) fglrx(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #5: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 94.5 MHz Image Size: 320 x 240 mm
(II) fglrx(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) fglrx(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz Image Size: 320 x 240 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1068 v_border: 0
(II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 75 kHz, PixClock max 110 MHz
(II) fglrx(0): Serial No: FCZJ3A0260107
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Specified desktop setup not supported: 8
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000004
(**) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 39 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1068
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 +hsync
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz
(II) fglrx(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 772 817 +hsync
(**) fglrx(0): Default mode "1024x768": 100.2 MHz (scaled from 0.0 MHz), 72.8 kHz, 90.0 Hz
(II) fglrx(0): Modeline "1024x768" 100.19 1024 1088 1200 1376 768 769 772 809(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600" 56.25 800 832 896 1048 600 601 604 631
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz
(II) fglrx(0): Modeline "800x600" 29.61 800 816 896 992 600 601 604 635 +hsync
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600" 68.18 800 848 936 1072 600 601 604 636
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600" 60.06 800 840 928 1056 600 601 604 632
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525
(**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480" 52.41 640 680 744 848 480 481 484 515
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480" 43.16 640 680 744 848 480 481 484 509
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480" 37.89 640 672 736 832 480 481 484 506
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz
(II) fglrx(0): Modeline "1152x864" 64.68 1152 1208 1328 1504 864 865 868 915 +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz
(II) fglrx(0): Modeline "1152x864" 58.29 1152 1200 1320 1488 864 865 868 911 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449 -hsync -vsync
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525 -hsync -vsync
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384" 19.68 512 528 576 632 384 384 385 416 -hsync
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497 -hsync
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 600 601 602 625 -hsync
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 600 601 605 742 -hsync
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 480 481 482 501 -hsync
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 480 491 493 525 -hsync
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 400 406 407 417 -hsync -vsync
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 400 457 459 524 -hsync -vsync
(--) fglrx(0): Display dimensions: (320, 240) mm
(--) fglrx(0): DPI set to (101, 108)
(**) fglrx(0): NoAccel = NO
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): CapabilitiesEx: 0x00000000
(**) fglrx(0): cpuFlags: 0x4000000f
(**) fglrx(0): cpuSpeedMHz: 0x00000779
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: no
(**) fglrx(0): KernelModuleParm: "agplock=0"
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) fglrx(0): UMM Bus area: 0xc0701000 (size=0x078ff000)
(II) fglrx(0): UMM area: 0xc0701000 (size=0x078ff000)
(II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 6.8.2.0
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:3:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xe0ae6000
(II) fglrx(0): [drm] mapped SAREA 0xe0ae6000 to 0xb7b4e000
(II) fglrx(0): [drm] framebuffer handle = 0xc0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.16.20
(II) fglrx(0): Date: Aug 16 2005
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.12-7-686
(II) fglrx(0): Build-Kernel MODVERSIONS: yes
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0xe6000000
(II) fglrx(0): [agp] Mode=0x1f00421b bridge: 0x10de/0x01e0
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask 0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f00431a
(II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f004312)
(II) fglrx(0): [agp] graphics chipset has AGP v3.0 (native mode)
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle = 0xe0f81000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x00701000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1434)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 1024)
(II) fglrx(0): Largest offscreen area available: 1280 x 402
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled(Xorg 6.8.2)
/etc/X11/xorg.conf ( généré par fglrxconfig)
# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.
# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# FontPath "/usr/X11R6/lib/X11/fonts/local/"
# FontPath "/usr/X11R6/lib/X11/fonts/misc/"
# FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
# FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "(null)"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
Option "KernelModuleParm" "agplock=0" # AGP locked user pages: disabled
BusID "PCI:3:0:0" # vendor=1002, device=4152
Screen 0
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
Screen "Screen0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
Sinon au démarage la version du driver semble être la 8.14.13 (si je me rappelle bien ), une vieille version installée avant qui n'a jamais marchée ( mais j'ai pas vraiment essayé non plus).
J'ai fait les manipulations décrites dans un des premiers messages de ce forum mais ca n'a pas marché...
donc je dois décharger le module fglrx , ensuite je fait un insmod ./fglrx.ko dans /lib/module/fglrx , je redémarre X et d'apres le log de X ca charge la derniere version.
EDIT: J'ai plus ce problème, j'ai supprimé ( apres recherche ) tous les fichiers dont le nom contenait fglrx dans /lib et réinstallé, maintenant le log de xorg indique la version 8.16.20 dès le premier lancement. Mais à part ça ça n'a rien changé...
glxgears tourne vite au début puis d'un coup ca ralentit tellemment que les FPS s'affichent même pas dans la console...
fgl_glxgears plante directement.
Voilà désolé pour ce long message, j'ai essayé plein de trucs mais rien n'a marché... Si quelqun a une idée , une suggestion... Merci d'avance
Dernière modification par MuZu (Le 02/09/2005, à 18:57)
Hors ligne
#111 Le 02/09/2005, à 04:22
- Saelynh
Re : [Info]Drivers ATi 8.16.20
@MuZu
j'ai fait un mix de mon xorg et du tien :
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection
Section "Extensions"
Option "RENDER" "Enable"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr-latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. Radeon 9600"
Driver "fglrx"
Option "UseInternalAGPGART" "no"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "SDM-HS75P"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Radeon 9600"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSectionesseye de voir si sa marche ou pas, oublie pas de faire une sauvgarde de ton xorg actuel ect...
good luck
Dernière modification par Saelynh (Le 02/09/2005, à 04:23)
[ http://www.dogmazic.net/saelynh _ http://www.jamendo.com/fr/artist/saelynh/ ]
Hors ligne
#112 Le 02/09/2005, à 14:50
- Jonas
Re : [Info]Drivers ATi 8.16.20
youpala youpala
J'ai reussi a configurer ma X600 mobile 64mo sur mon portable (grace a ce post).
$ glxgears
10500 frames in 5.0 seconds = 2100.000 FPS
11801 frames in 5.0 seconds = 2360.200 FPS
12257 frames in 5.0 seconds = 2451.400 FPS
12256 frames in 5.0 seconds = 2451.200 FPS
12257 frames in 5.0 seconds = 2451.400 FPS
$ fgl_glxgears
1692 frames in 5.0 seconds = 338.400 FPS
2436 frames in 5.0 seconds = 487.200 FPS
2419 frames in 5.0 seconds = 483.800 FPS
2430 frames in 5.0 seconds = 486.000 FPS
2423 frames in 5.0 seconds = 484.600 FPSJ'ai parcouru que les 3 1ere pages et je n'ai vu personne parler de la config de fglrxconfig.
Pour le configurer j'ai utiliser le tuto pour mandriva suivant : http://www.pcinpact.com/forum/sujet_238 … ntry708783
Attention ! pas le script, il est pour mandriva (et il marche tres bien mais n'install pas les dernier drivers). J'ai juste utiliser les conseil qui se trouve dans le chapitre "Configuration du serveur graphique:"
Pour poster facilement des images et fichiers sur un forum jetez un coup d'oeil ici
Hors ligne
#113 Le 02/09/2005, à 19:53
- MuZu
Re : [Info]Drivers ATi 8.16.20
Merci pour ton xorg.conf Saelynh!
Enfin bon il fonctionnait pas trop, d'abord j'ai eu un probleme avec le BUSID "1:0:0" ou un truc comme ça(en tout cas ca démarrait pas) , apparament ce qui fonctionne avec ma carte c'est 3:0:0 (c'est ce que génère ma carte avec un commentaire avec deux nombres que je retrouve justement à la ligne 3:0:0 avec lspci )
mais bon ya ce warning bizare...
(WW) fglrx: No matching Device section for instance (BusID PCI:3:0:1) found
ensuite j'ai eu un problème avec le clavier, bon jme suis dit jpeux mettre la section qui marchait bien de l'ancien xorg.conf...
puis un problème de chemins de polices..
Donc finalement j'ai essayé de voir les principales différences entre le fichier que tu m'a proposé et celui que j'avais avant, puis de modifier mon xorg.conf en conséquence, et ça marche toujours pas...
Je crois que je vais repasser en hoary et réessayer
merci quand meme en tout cas
Sinon c'est justement le tuto dont jonas parle qui m'a aidé à m'en sortir sous mandriva
Dernière modification par MuZu (Le 02/09/2005, à 19:55)
Hors ligne
#114 Le 04/09/2005, à 10:26
- MuZu
Re : [Info]Drivers ATi 8.16.20
Aaaarghhhhhhh
jme suis fait chi** pendant des jours à installer sur 5.10 sans succès et apres avoir réinstallé la 5.04 ca marche du premier coup en un reboot....
enfin jsuis content quand même 
muzu@ubuntu:~$ glxgears
15702 frames in 5.0 seconds = 3140.400 FPS
15661 frames in 5.0 seconds = 3132.200 FPS
15677 frames in 5.0 seconds = 3135.400 FPS
15671 frames in 5.0 seconds = 3134.200 FPS
15694 frames in 5.0 seconds = 3138.800 FPS
muzu@ubuntu:~$ fgl_glxgears
2641 frames in 5.0 seconds = 528.200 FPS
2983 frames in 5.0 seconds = 596.600 FPS
2985 frames in 5.0 seconds = 597.000 FPS
2999 frames in 5.0 seconds = 599.800 FPS
2993 frames in 5.0 seconds = 598.600 FPS
3019 frames in 5.0 seconds = 603.800 FPS
radeon 9600 256mo
Dernière modification par MuZu (Le 04/09/2005, à 11:01)
Hors ligne
#115 Le 04/09/2005, à 15:29
- Julian
Re : [Info]Drivers ATi 8.16.20
ben t'as bien de la chance 
Persone n'a la soluce pour ma 8500 qui freeze?
julian@jabber.fr
Hors ligne
#116 Le 16/09/2005, à 06:49
- Saelynh
Re : [Info]Drivers ATi 8.16.20
bon voila que sa marchai et que subitement sa marche lpus, qq'un sait comment on désinstale ce truc ?
je vais remetre les autres drivers pasque la vraiment .... c'est la merde
(hum au cas ou qq'un sache ce demerdé avec sa :
Warning: could not find /lib/modules/fglrx/build_mod/2.6.x/.libfglrx_ip.a.GCC3.cmd for /lib/modules/fglrx/build_mod/2.6.x/libfglrx_ip.a.GCC3
merci )
[ http://www.dogmazic.net/saelynh _ http://www.jamendo.com/fr/artist/saelynh/ ]
Hors ligne
#117 Le 16/09/2005, à 13:19
- mr_pouit
Re : [Info]Drivers ATi 8.16.20
bon voila que sa marchai et que subitement sa marche lpus, qq'un sait comment on désinstale ce truc
je vais remetre les autres drivers pasque la vraiment .... c'est la merde
(hum au cas ou qq'un sache ce demerdé avec sa :
Warning: could not find /lib/modules/fglrx/build_mod/2.6.x/.libfglrx_ip.a.GCC3.cmd for /lib/modules/fglrx/build_mod/2.6.x/libfglrx_ip.a.GCC3merci
pour désinstaller, tu as un fichier fglrx-uninstall à exécuter. Je crois qu'il est dans /usr/fglrx/
Ce script supprime tout sauf le module noyau et le dossier fglrx créé das /lib/modules
Hors ligne
#118 Le 16/09/2005, à 18:51
- StK
Re : [Info]Drivers ATi 8.16.20
J'ai essayer toutes ces manips, sans succes.
Je tourne sur une breezy avec kernel 2.6.13.1 (je sais plus ce que j'ai mis en option pour le framebuffer)
j'ai les meme soucis que MuZu (le glxgears qui tourne "correctement" pendant 2 secondes puis 1-2 fps et score qui ne s'affiche pas.)
également le meme warning:
(WW) fglrx: No matching Device section for instance (BusID PCI:2:0:1) foundalors que mon xorg.conf indique bien un BusID PCI:2:0:0
Une idée svp ?
Hors ligne
#119 Le 17/09/2005, à 12:26
- dudie
Re : [Info]Drivers ATi 8.16.20
http://forum.ubuntu-fr.org/viewtopic.php?id=12237
fait gaffe !!! parce-que linux fracas
et Ubuntu ? Ça tue !!
Hors ligne
#120 Le 21/09/2005, à 13:32
- EdWong
Re : [Info]Drivers ATi 8.16.20
J'ai réussie a faire marcher pleinement ma 9800Pro grace a ce topic, mais y'a quand meme un truc qui me chiffone, ma carte fait un drole de bruit quand je lance glxgears et plus encore avec fgl_glxgears.
Un bruit dans le genre grésillement (j'ai l'impression d'entendre les engrenages tourner) pour le premier et siflement pour le second (pas constant le sifflement, mais periodique).
J'ai stoper mes ventilo un instant pour etre sûr, et c'est bien la carte graphique qui fait ce bruit .
Je précise que je n'ai pas de boitier, tout est posé sur mon bureau, mais quand meme c la premiere fois que j'entend ma carte graphique.
J'ai installer Chromium -> pas de bruit
puis armagetron -> pas de bruit sauf si je passe en resolution 640*480 là j'ai un sifflement, puis en 800*600 il s'attenue au delà je le percoi pas .
@Saelynh: Pas tant que ca, l'écran est dans le coin de mon bureau, la mobo sur un spindle de cd vide en dessous les periph IDE, le tout a coté de l'écran dans l'espace mort, l'alim est derriere l'ecran, juste un truc qui fait vraiment pas serieux c'est le ventilo qui est juste posé sur le radiateur du proc 
Dernière modification par EdWong (Le 21/09/2005, à 13:56)
Hors ligne
#121 Le 21/09/2005, à 13:36
- Saelynh
Re : [Info]Drivers ATi 8.16.20
oula sa doit etre un beau bordel chez toi edWong O_o
[ http://www.dogmazic.net/saelynh _ http://www.jamendo.com/fr/artist/saelynh/ ]
Hors ligne
#122 Le 22/09/2005, à 17:57
- BigMadWolf
Re : [Info]Drivers ATi 8.16.20
j'ai tenté de suivre les infos de ce post mais ca ne marche tjrs pas
cat /var/log/Xorg.0.log|grep fglrx:
xxx@xxx:/lib/modules/fglrx$ cat /var/log/Xorg.0.log|grep fglrx
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
(II) fglrx(0): pEnt->device->identifier=0x82117c8
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) fglrx(0): PCI bus 3 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "CapabilitiesEx" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "(null)"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "UseInternalAGPGART" "yes"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(**) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "MOBILITY RADEON X700 (M26 5653)" (Chipset = 0x5653)
(--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x11b2)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfeaf0000
(--) fglrx(0): ROM-BIOS at 0xfeac0000
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.10
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M26-P
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR1
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Connected Display1: LCD on internal LVDS
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: CPT Model: 13b0 Serial#: 0
(II) fglrx(0): Year: 2005 Week: 30
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.615 redY: 0.332 greenX: 0.315 greenY: 0.561
(II) fglrx(0): blueX: 0.152 blueY: 0.127 whiteX: 0.315 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) fglrx(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) fglrx(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 813 v_border: 0
(II) fglrx(0): CPT
(II) fglrx(0): CLAA154WA05
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Specified desktop setup not supported: 8
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000004
(**) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 9 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x800 (pitch 1280)
(**) fglrx(0): *Mode "1280x800": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800" 68.90 1280 1301 1333 1408 800 801 804 813 +csync
(**) fglrx(0): Default mode "1024x768": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 68.90 1024 1045 1077 1408 768 801 804 813(**) fglrx(0): Default mode "800x600": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 68.90 800 821 853 1408 600 801 804 813
(**) fglrx(0): Default mode "640x480": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 68.90 640 661 693 1408 480 801 804 813
(**) fglrx(0): Default mode "640x400": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 68.90 640 661 693 1408 400 801 804 813 -hsync -vsync
(**) fglrx(0): Default mode "512x384": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 68.90 512 533 565 1408 384 801 804 813 -hsync
(**) fglrx(0): Default mode "400x300": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300" 68.90 400 421 453 1408 600 801 804 813 -hsync
(**) fglrx(0): Default mode "320x240": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240" 68.90 320 341 373 1408 480 801 804 813 -hsync
(**) fglrx(0): Default mode "320x200": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200" 68.90 320 341 373 1408 400 801 804 813 -hsync -vsync
(--) fglrx(0): Display dimensions: (330, 210) mm
(--) fglrx(0): DPI set to (98, 96)
(**) fglrx(0): NoAccel = NO
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): CapabilitiesEx: 0x00000000
(**) fglrx(0): cpuFlags: 0x8000001d
(**) fglrx(0): cpuSpeedMHz: 0x000006c1
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) fglrx(0): UMM Bus area: 0xd05e9000 (size=0x07a07000)
(II) fglrx(0): UMM area: 0xd05e9000 (size=0x07a07000)
(II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 6.8.2.0
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:3:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xe0caa000
(II) fglrx(0): [drm] mapped SAREA 0xe0caa000 to 0xb7baf000
(II) fglrx(0): [drm] framebuffer handle = 0xd0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.16.20
(II) fglrx(0): Date: Aug 16 2005
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.10-5-386
(II) fglrx(0): Build-Kernel MODVERSIONS: yes
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0xfeaf0000
(II) fglrx(0): [pcie] 65536 kB allocated with handle 0xdeadbeef
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(II) fglrx(0): [drm] texture shared area handle = 0xe0e73000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x005e9000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1210)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 800)
(II) fglrx(0): Largest offscreen area available: 1280 x 402
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabledla bonne version des driver a donc l'air detre installée
Voilà mes autres test :
xxx@xxx:/lib/modules/fglrx$ glxinfo | grep direct
direct rendering: No
OpenGL renderer string: Mesa GLX Indirectxxx@xxx:/lib/modules/fglrx$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.2.1)pour finir voila le xorg.conf
# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.
# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr-latin9"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "(null)"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:3:0:0" # vendor=1002, device=5653
Screen 0
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1280x800"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 800
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
Screen "Screen0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###Pouvez-vous m'aider svp ?
BigMadWolf
Portable HP Pavilon dv4-1115ef - Ubuntu Intrepid
Hors ligne
#123 Le 27/09/2005, à 12:36
- FreedomSound
Re : [Info]Drivers ATi 8.16.20
BigMadWolf > C du PCIexpress ?
humpf !
M'enfin ?!
Hors ligne
#124 Le 27/09/2005, à 12:40
- M@Nu-SoLo
Re : [Info]Drivers ATi 8.16.20
manu@ubuntu:~ $ cat /var/log/Xorg.0.log|grep fglrx
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
(WW) fglrx: No matching Device section for instance (BusID PCI:4:0:1) found
(II) fglrx(0): pEnt->device->identifier=0x820e6f8
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) fglrx(0): PCI bus 4 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): Qbs disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "RADEON X700 PRO (RV410 5E4B)" (Chipset = 0x5e4b)
(--) fglrx(0): (PciSubVendor = 0x18bc, PciSubDevice = 0x0652)
(--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd8000000
(--) fglrx(0): MMIO registers at 0xd6fe0000
(--) fglrx(0): ROM-BIOS at 0xd6fc0000
(--) fglrx(0): ChipExtRevID = 0x00
(--) fglrx(0): ChipIntRevID = 0x02
(II) fglrx(0): Video RAM override, using 128000 kB instead of 131072 kB
(**) fglrx(0): VideoRAM: 128000 kByte (64-bit SDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector0: DDCType-1, DACType-0, TMDSType--1, ConnectorType-2
(II) fglrx(0): Connector1: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 1
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 1 with Monitor Type 0
(WW) fglrx(0): TV is detected, but it cannot be turned on
(II) fglrx(0): Primary head:
(II) fglrx(0): Secondary head:
(II) fglrx(0): EDID data from the display on Primary head ----------------
(II) fglrx(0): Manufacturer: TEK Model: 152e Serial#: 120
(II) fglrx(0): Year: 1996 Week: 37
(II) fglrx(0): EDID Version: 1.0
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V
(II) fglrx(0): Signal levels configurable
(II) fglrx(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 40 vert.: 30
(II) fglrx(0): Gamma: 2.54
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): redX: 0.635 redY: 0.333 greenX: 0.280 greenY: 0.595
(II) fglrx(0): blueX: 0.152 blueY: 0.063 whiteX: 0.283 whiteY: 0.298
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 203.3 MHz Image Size: 380 x 285 mm
(II) fglrx(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
(II) fglrx(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 203.3 MHz Image Size: 355 x 284 mm
(II) fglrx(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
(II) fglrx(0): v_active: 1280 v_sync: 1281 v_sync_end 1284 v_blanking: 1330 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 179.4 MHz Image Size: 380 x 282 mm
(II) fglrx(0): h_active: 1600 h_sync: 1656 h_sync_end 1836 h_blank_end 2104 h_border: 0
(II) fglrx(0): v_active: 1188 v_sync: 1188 v_sync_end 1191 v_blanking: 1226 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 143.4 MHz Image Size: 380 x 285 mm
(II) fglrx(0): h_active: 1360 h_sync: 1404 h_sync_end 1548 h_blank_end 1764 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1024 v_sync_end 1027 v_blanking: 1064 v_border: 0
(II) fglrx(0):
(II) fglrx(0): DesktopSetup 0x0000
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Overlay disabled
(==) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=27 min=20000 max=50000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total 3 valid mode(s) found.
(--) fglrx(0): Virtual size is 1600x1200 (pitch 1600)
(**) fglrx(0): *Default mode "1600x1200": 203.3 MHz (scaled from 0.0 MHz), 94.1 kHz, 75.3 Hz
(II) fglrx(0): Modeline "1600x1200" 203.33 1600 1664 1856 2160 1200 1201 1204 1250
(**) fglrx(0): Default mode "1600x1188": 179.4 MHz (scaled from 0.0 MHz), 85.3 kHz, 69.5 Hz
(II) fglrx(0): Modeline "1600x1188" 179.37 1600 1656 1836 2104 1188 1188 1191 1226
(**) fglrx(0): *Default mode "1360x1024": 143.4 MHz (scaled from 0.0 MHz), 81.3 kHz, 76.4 Hz
(II) fglrx(0): Modeline "1360x1024" 143.43 1360 1404 1548 1764 1024 1024 1027 1064
(--) fglrx(0): Display dimensions: (400, 300) mm
(--) fglrx(0): DPI set to (101, 101)
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): cpuSpeedMHz: 0x00000bc3
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) fglrx(0): UMM area: 0xd8954000 (size=0x0739c000)
(II) fglrx(0): driver needs XFree86 version: 4.3.x
(WW) fglrx(0): could not detect XFree86 version (query_status=-3)
(II) fglrx(0): doing DRIScreenInit
[drm] failed to load kernel module "fglrx"
(II) fglrx(0): [drm] drmOpen failed
(EE) fglrx(0): DRIScreenInit failed!
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xd8000000 FBMappedSize: 0x07cf0000
(II) fglrx(0): Splitting WC range: base: 0xd8000000, size: 0x7cf0000
(II) fglrx(0): Splitting WC range: base: 0xdc000000, size: 0x3cf0000
(II) fglrx(0): Splitting WC range: base: 0xde000000, size: 0x1cf0000
(II) fglrx(0): Splitting WC range: base: 0xdf000000, size: 0xcf0000
(II) fglrx(0): Splitting WC range: base: 0xdf800000, size: 0x4f0000
(II) fglrx(0): Splitting WC range: base: 0xdfc00000, size: 0xf0000
(II) fglrx(0): Splitting WC range: base: 0xdfc80000, size: 0x70000
(II) fglrx(0): Splitting WC range: base: 0xdfcc0000, size: 0x30000
(==) fglrx(0): Write-combining range (0xdfce0000,0x10000)
(==) fglrx(0): Write-combining range (0xdfcc0000,0x30000)
(==) fglrx(0): Write-combining range (0xdfc80000,0x70000)
(==) fglrx(0): Write-combining range (0xdfc00000,0xf0000)
(==) fglrx(0): Write-combining range (0xdf800000,0x4f0000)
(==) fglrx(0): Write-combining range (0xdf000000,0xcf0000)
(==) fglrx(0): Write-combining range (0xde000000,0x1cf0000)
(WW) fglrx(0): Failed to set up write-combining range (0xdc000000,0x3cf0000)
(WW) fglrx(0): Failed to set up write-combining range (0xd8000000,0x7cf0000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1600,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1600,1200) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 1200)
(II) fglrx(0): Largest offscreen area available: 1600 x 6988
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
J'ai aussi un X700 (x700 pro exactement) et je deviens fou
J'ai le meme probleme que toi...
Hors ligne
#125 Le 27/09/2005, à 14:17
- Saelynh
Re : [Info]Drivers ATi 8.16.20
ta des balise de code pour sa, sa flood sinon, merci
comem sa[ http://www.dogmazic.net/saelynh _ http://www.jamendo.com/fr/artist/saelynh/ ]
Hors ligne