Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

ArchangeGabriel · Le 26/05/2012, à 12:39

@rc_outisde : C'est pas très étonnant compte-tenu des drivers intel toujours meilleurs et des limitations de bumblebee toujours présente. Si on arrive à se passer de VirtualGL, on peut avoir des performances environ 10 fois meilleures (même mieux pour certains), mais c'est pas facile...

@wilson125 : Non, pas de chipset Intel. C'est rare mais il existe des modèles pour lesquels c'est le cas. Donc pas d'Optimus, et pas de Bumblebee.

wilson125 · Le 26/05/2012, à 13:04

merci

rc_outside · Le 26/05/2012, à 17:07

ArchangeGabriel a écrit :

@rc_outisde : C'est pas très étonnant compte-tenu des drivers intel toujours meilleurs et des limitations de bumblebee toujours présente. Si on arrive à se passer de VirtualGL, on peut avoir des performances environ 10 fois meilleures (même mieux pour certains), mais c'est pas facile...

Merci pour la réponse, j'ai fait une reinstall et ça fonctionne bien mieux En revanche j'ai une autonomie ridicule (1h15) sur batterie (contre 3h en moyenne sous win), la commande grep me renvoie :

grep: /proc/acpi/battery/BAT/state: Aucun fichier ou dossier de ce type

Sachant que chez moi c'est bien BAT tout court pour ma batterie (confirmé par conky) tu penses que ça a un lien avec ma carte nvidia qui continue à pomper ? ou faut queje voie plus large ?

abecidofugy · Le 26/05/2012, à 19:57

Bonsoir
En installant les drivers Bumblee j'ai néanmoins ces erreurs :

dmesg|grep -i failed
[    0.759888]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    0.764444]  pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[   10.381246] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[   18.539658] CIFS VFS: cifs_mount failed w/return code = -101
[   25.443373] [drm] MTRR allocation failed.  Graphics performance may suffer.
[   25.443898] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[   25.443962] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[   26.011560] ACPI Error: Evaluating _BCM failed (20110623/video-372)
[   34.681309] CIFS VFS: cifs_mount failed w/return code = -113

Quelqu'un peut m'aider svp ? Merci.

OCCULTHUM · Le 27/05/2012, à 14:27

Bonjour, Sur un Alien 14" R2 Avec i5 G650 j'installe bumblebee comme prévu : Je lance glxspheres OK après j'essaye de lancer optirun glxspheres et là,j'obtiens : Failed to initialize Nvidia plus autre chose et le pc se coupe. En premier lieu avec Mint 13 Mate et réinstallé Ubuntu 12.04 IDEM [ 17.970]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 17.970] X Protocol Version 11, Revision 0
[ 17.970] Build Operating System: Linux 2.6.24-31-server x86_64 Ubuntu
[ 17.970] Current Operating System: Linux ALIEN 3.2.0-25-generic #40-Ubuntu SMP Wed May 23 20:30:51 UTC 2012 x86_64
[ 17.970] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-25-generic root=UUID=9855fbea-e293-49de-9351-b19b97fe76b4 ro quiet splash vt.handoff=7
[ 17.970] Build Date: 07 May 2012 11:43:21PM
[ 17.970] xorg-server 2:1.11.4-0ubuntu10.2 (For technical support please see http://www.ubuntu.com/support)
[ 17.970] Current version of pixman: 0.24.4
[ 17.970] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17.970] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17.970] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 27 13:55:52 2012
[ 18.036] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.164] (==) No Layout section. Using the first Screen section.
[ 18.164] (==) No screen section available. Using defaults.
[ 18.164] (**) |-->Screen "Default Screen Section" (0)
[ 18.164] (**) | |-->Monitor "<default monitor>"
[ 18.177] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.177] (==) Automatically adding devices
[ 18.177] (==) Automatically enabling devices
[ 18.191] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 18.191] Entry deleted from font path.
[ 18.191] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 18.191] Entry deleted from font path.
[ 18.191] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 18.191] Entry deleted from font path.
[ 18.208] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 18.208] Entry deleted from font path.
[ 18.208] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 18.208] Entry deleted from font path.
[ 18.208] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 18.208] Entry deleted from font path.
[ 18.208] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 18.208] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 18.208] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.208] (II) Loader magic: 0x7f3bf7ef9b00
[ 18.208] (II) Module ABI versions:
[ 18.208] X.Org ANSI C Emulation: 0.4
[ 18.208] X.Org Video Driver: 11.0
[ 18.208] X.Org XInput driver : 16.0
[ 18.208] X.Org Server Extension : 6.0
[ 18.209] (--) PCI:*(0:0:2:0) 8086:0126:1028:0552 rev 9, Mem @ 0xd2000000/4194304, 0xc0000000/268435456, I/O @ 0x00004000/64
[ 18.209] (II) Open ACPI successful (/var/run/acpid.socket)
[ 18.209] (II) LoadModule: "extmod"
[ 18.234] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 18.254] (II) Module extmod: vendor="X.Org Foundation"
[ 18.254] compiled for 1.11.3, module version = 1.0.0
[ 18.254] Module class: X.Org Server Extension
[ 18.254] ABI class: X.Org Server Extension, version 6.0
[ 18.254] (II) Loading extension MIT-SCREEN-SAVER
[ 18.254] (II) Loading extension XFree86-VidModeExtension
[ 18.254] (II) Loading extension XFree86-DGA
[ 18.254] (II) Loading extension DPMS
[ 18.254] (II) Loading extension XVideo
[ 18.254] (II) Loading extension XVideo-MotionCompensation
[ 18.254] (II) Loading extension X-Resource
[ 18.254] (II) LoadModule: "dbe"
[ 18.254] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 18.274] (II) Module dbe: vendor="X.Org Foundation"
[ 18.274] compiled for 1.11.3, module version = 1.0.0
[ 18.274] Module class: X.Org Server Extension
[ 18.274] ABI class: X.Org Server Extension, version 6.0
[ 18.274] (II) Loading extension DOUBLE-BUFFER
[ 18.274] (II) LoadModule: "glx"
[ 18.274] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.293] (II) Module glx: vendor="X.Org Foundation"
[ 18.293] compiled for 1.11.3, module version = 1.0.0
[ 18.293] ABI class: X.Org Server Extension, version 6.0
[ 18.293] (==) AIGLX enabled
[ 18.293] (II) Loading extension GLX
[ 18.293] (II) LoadModule: "record"
[ 18.294] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 18.294] (II) Module record: vendor="X.Org Foundation"
[ 18.294] compiled for 1.11.3, module version = 1.13.0
[ 18.294] Module class: X.Org Server Extension
[ 18.294] ABI class: X.Org Server Extension, version 6.0
[ 18.294] (II) Loading extension RECORD
[ 18.294] (II) LoadModule: "dri"
[ 18.294] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 18.312] (II) Module dri: vendor="X.Org Foundation"
[ 18.312] compiled for 1.11.3, module version = 1.0.0
[ 18.312] ABI class: X.Org Server Extension, version 6.0
[ 18.312] (II) Loading extension XFree86-DRI
[ 18.312] (II) LoadModule: "dri2"
[ 18.312] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 18.313] (II) Module dri2: vendor="X.Org Foundation"
[ 18.313] compiled for 1.11.3, module version = 1.2.0
[ 18.313] ABI class: X.Org Server Extension, version 6.0
[ 18.313] (II) Loading extension DRI2
[ 18.313] (==) Matched intel as autoconfigured driver 0
[ 18.313] (==) Matched vesa as autoconfigured driver 1
[ 18.313] (==) Matched fbdev as autoconfigured driver 2
[ 18.313] (==) Assigned the driver to the xf86ConfigLayout
[ 18.313] (II) LoadModule: "intel"
[ 18.323] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 18.376] (II) Module intel: vendor="X.Org Foundation"
[ 18.376] compiled for 1.11.3, module version = 2.19.0
[ 18.376] Module class: X.Org Video Driver
[ 18.376] ABI class: X.Org Video Driver, version 11.0
[ 18.376] (II) LoadModule: "vesa"
[ 18.378] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 18.394] (II) Module vesa: vendor="X.Org Foundation"
[ 18.394] compiled for 1.11.3, module version = 2.3.0
[ 18.394] Module class: X.Org Video Driver
[ 18.394] ABI class: X.Org Video Driver, version 11.0
[ 18.394] (II) LoadModule: "fbdev"
[ 18.394] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 18.398] (II) Module fbdev: vendor="X.Org Foundation"
[ 18.398] compiled for 1.11.3, module version = 0.4.2
[ 18.398] ABI class: X.Org Video Driver, version 11.0
[ 18.416] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2)
[ 18.416] (II) VESA: driver for VESA chipsets: vesa
[ 18.416] (II) FBDEV: driver for framebuffer: fbdev
[ 18.416] (++) using VT number 7

[ 18.418] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 18.418] (WW) Falling back to old probe method for vesa
[ 18.418] (WW) Falling back to old probe method for fbdev
[ 18.418] (II) Loading sub module "fbdevhw"
[ 18.418] (II) LoadModule: "fbdevhw"
[ 18.418] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 18.419] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 18.419] compiled for 1.11.3, module version = 0.0.2
[ 18.419] ABI class: X.Org Video Driver, version 11.0
[ 18.419] drmOpenDevice: node name is /dev/dri/card0
[ 18.419] drmOpenDevice: open result is 9, (OK)
[ 18.419] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 18.419] drmOpenDevice: node name is /dev/dri/card0
[ 18.419] drmOpenDevice: open result is 9, (OK)
[ 18.419] drmOpenByBusid: drmOpenMinor returns 9
[ 18.419] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 18.419] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.419] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 18.419] (==) intel(0): RGB weight 888
[ 18.419] (==) intel(0): Default visual is TrueColor
[ 18.419] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 18.419] (--) intel(0): Chipset: "Sandybridge Mobile (GT2+)"
[ 18.419] (**) intel(0): Relaxed fencing enabled
[ 18.419] (**) intel(0): Wait on SwapBuffers? enabled
[ 18.419] (**) intel(0): Triple buffering? enabled
[ 18.419] (**) intel(0): Framebuffer tiled
[ 18.419] (**) intel(0): Pixmaps tiled
[ 18.419] (**) intel(0): 3D buffers tiled
[ 18.419] (**) intel(0): SwapBuffers wait enabled
[ 18.419] (==) intel(0): video overlay key set to 0x101fe
[ 18.419] (II) intel(0): Output LVDS1 has no monitor section
[ 18.419] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 18.419] (II) intel(0): Output VGA1 has no monitor section
[ 18.424] (II) intel(0): Output HDMI1 has no monitor section
[ 18.472] (II) intel(0): Output DP1 has no monitor section
[ 18.476] (II) intel(0): Output HDMI2 has no monitor section
[ 18.524] (II) intel(0): Output DP2 has no monitor section
[ 18.524] (II) intel(0): EDID for output LVDS1
[ 18.524] (II) intel(0): Manufacturer: LGD Model: 35c Serial#: 0
[ 18.524] (II) intel(0): Year: 2011 Week: 0
[ 18.524] (II) intel(0): EDID Version: 1.4
[ 18.524] (II) intel(0): Digital Display Input
[ 18.524] (II) intel(0): 6 bits per channel
[ 18.524] (II) intel(0): Digital interface is undefined
[ 18.524] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 18.524] (II) intel(0): Gamma: 2.20
[ 18.524] (II) intel(0): No DPMS capabilities specified
[ 18.524] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 18.524] (II) intel(0): First detailed timing is preferred mode
[ 18.524] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 18.524] (II) intel(0): redX: 0.585 redY: 0.345 greenX: 0.340 greenY: 0.560
[ 18.524] (II) intel(0): blueX: 0.160 blueY: 0.125 whiteX: 0.313 whiteY: 0.329
[ 18.524] (II) intel(0): Manufacturer's mask: 0
[ 18.524] (II) intel(0): Supported detailed timing:
[ 18.524] (II) intel(0): clock: 76.8 MHz Image Size: 309 x 174 mm
[ 18.524] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1620 h_border: 0
[ 18.524] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 790 v_border: 0
[ 18.524] (II) intel(0): Supported detailed timing:
[ 18.524] (II) intel(0): clock: 51.2 MHz Image Size: 309 x 174 mm
[ 18.524] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1620 h_border: 0
[ 18.524] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 790 v_border: 0
[ 18.524] (II) intel(0): KV2MF\80140WH2
[ 18.524] (II) intel(0): Unknown vendor-specific block 0
[ 18.524] (II) intel(0): EDID (in hex):
[ 18.524] (II) intel(0): 00ffffffffffff0030e45c0300000000
[ 18.524] (II) intel(0): 00150104901f11780ad1059558578f29
[ 18.524] (II) intel(0): 20505400000001010101010101010101
[ 18.524] (II) intel(0): 010101010101fb1d56fe500016303020
[ 18.524] (II) intel(0): 350035ae1000001afc1356fe50001630
[ 18.524] (II) intel(0): 3020350035ae1000001a000000fe004b
[ 18.524] (II) intel(0): 56324d46803134305748320a00000000
[ 18.524] (II) intel(0): 00000131940010000001010a202000fc
[ 18.524] (II) intel(0): EDID vendor "LGD", prod id 860
[ 18.524] (II) intel(0): Printing DDC gathered Modelines:
[ 18.524] (II) intel(0): Modeline "1366x768"x0.0 76.75 1366 1414 1446 1620 768 771 776 790 +hsync -vsync (47.4 kHz)
[ 18.524] (II) intel(0): Modeline "1366x768"x0.0 51.16 1366 1414 1446 1620 768 771 776 790 +hsync -vsync (31.6 kHz)
[ 18.524] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 18.524] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 18.524] (II) intel(0): Printing probed modes for output LVDS1
[ 18.524] (II) intel(0): Modeline "1366x768"x60.0 76.75 1366 1414 1446 1620 768 771 776 790 +hsync -vsync (47.4 kHz)
[ 18.524] (II) intel(0): Modeline "1366x768"x40.0 51.16 1366 1414 1446 1620 768 771 776 790 +hsync -vsync (31.6 kHz)
[ 18.524] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 18.524] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 18.524] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 18.524] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 18.524] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 18.524] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 18.524] (II) intel(0): EDID for output VGA1
[ 18.529] (II) intel(0): EDID for output HDMI1
[ 18.580] (II) intel(0): EDID for output DP1
[ 18.584] (II) intel(0): EDID for output HDMI2
[ 18.632] (II) intel(0): EDID for output DP2
[ 18.632] (II) intel(0): Output LVDS1 connected
[ 18.632] (II) intel(0): Output VGA1 disconnected
[ 18.632] (II) intel(0): Output HDMI1 disconnected
[ 18.632] (II) intel(0): Output DP1 disconnected
[ 18.632] (II) intel(0): Output HDMI2 disconnected
[ 18.632] (II) intel(0): Output DP2 disconnected
[ 18.632] (II) intel(0): Using exact sizes for initial modes
[ 18.632] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 18.632] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 18.632] (II) intel(0): Kernel page flipping support detected, enabling
[ 18.632] (**) intel(0): Display dimensions: (310, 170) mm
[ 18.632] (**) intel(0): DPI set to (111, 114)
[ 18.632] (II) Loading sub module "fb"
[ 18.632] (II) LoadModule: "fb"
[ 18.652] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.689] (II) Module fb: vendor="X.Org Foundation"
[ 18.689] compiled for 1.11.3, module version = 1.0.0
[ 18.689] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.689] (II) Loading sub module "dri2"
[ 18.689] (II) LoadModule: "dri2"
[ 18.689] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 18.689] (II) Module dri2: vendor="X.Org Foundation"
[ 18.689] compiled for 1.11.3, module version = 1.2.0
[ 18.689] ABI class: X.Org Server Extension, version 6.0
[ 18.689] (II) UnloadModule: "vesa"
[ 18.689] (II) Unloading vesa
[ 18.689] (II) UnloadModule: "fbdev"
[ 18.689] (II) Unloading fbdev
[ 18.689] (II) UnloadModule: "fbdevhw"
[ 18.689] (II) Unloading fbdevhw
[ 18.689] (==) Depth 24 pixmap format is 32 bpp
[ 18.689] (II) intel(0): [DRI2] Setup complete
[ 18.689] (II) intel(0): [DRI2] DRI driver: i965
[ 18.689] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 18.706] (II) UXA(0): Driver registered support for the following operations:
[ 18.706] (II) solid
[ 18.706] (II) copy
[ 18.706] (II) composite (RENDER acceleration)
[ 18.706] (II) put_image
[ 18.706] (II) get_image
[ 18.706] (==) intel(0): Backing store disabled
[ 18.706] (==) intel(0): Silken mouse enabled
[ 18.706] (II) intel(0): Initializing HW Cursor
[ 18.706] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 18.706] (==) intel(0): DPMS enabled
[ 18.706] (==) intel(0): Intel XvMC decoder enabled
[ 18.706] (II) intel(0): Set up textured video
[ 18.706] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 18.706] (II) intel(0): direct rendering: DRI2 Enabled
[ 18.706] (==) intel(0): hotplug detection: "enabled"
[ 18.764] (--) RandR disabled
[ 18.764] (II) Initializing built-in extension Generic Event Extension
[ 18.764] (II) Initializing built-in extension SHAPE
[ 18.764] (II) Initializing built-in extension MIT-SHM
[ 18.764] (II) Initializing built-in extension XInputExtension
[ 18.764] (II) Initializing built-in extension XTEST
[ 18.764] (II) Initializing built-in extension BIG-REQUESTS
[ 18.764] (II) Initializing built-in extension SYNC
[ 18.764] (II) Initializing built-in extension XKEYBOARD
[ 18.764] (II) Initializing built-in extension XC-MISC
[ 18.764] (II) Initializing built-in extension SECURITY
[ 18.764] (II) Initializing built-in extension XINERAMA
[ 18.764] (II) Initializing built-in extension XFIXES
[ 18.764] (II) Initializing built-in extension RENDER
[ 18.764] (II) Initializing built-in extension RANDR
[ 18.764] (II) Initializing built-in extension COMPOSITE
[ 18.764] (II) Initializing built-in extension DAMAGE
[ 18.999] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 18.999] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 18.999] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 18.999] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 18.999] (II) AIGLX: Loaded and initialized i965
[ 18.999] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 18.999] (II) intel(0): Setting screen physical size to 361 x 203
[ 19.098] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 19.119] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 19.119] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.119] (II) LoadModule: "evdev"
[ 19.119] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.143] (II) Module evdev: vendor="X.Org Foundation"
[ 19.143] compiled for 1.11.3, module version = 2.7.0
[ 19.143] Module class: X.Org XInput Driver
[ 19.143] ABI class: X.Org XInput driver, version 16.0
[ 19.143] (II) Using input driver 'evdev' for 'Power Button'
[ 19.143] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.144] (**) Power Button: always reports core events
[ 19.144] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 19.144] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.144] (--) evdev: Power Button: Found keys
[ 19.144] (II) evdev: Power Button: Configuring as keyboard
[ 19.144] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 19.144] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 19.144] (**) Option "xkb_rules" "evdev"
[ 19.144] (**) Option "xkb_model" "pc105"
[ 19.144] (**) Option "xkb_layout" "fr"
[ 19.144] (**) Option "xkb_variant" "oss_latin9"
[ 19.145] (II) XKB: reuse xkmfile /var/lib/xkb/server-5CF6104AE02888C2C5885204F0BE165EA85EE4F6.xkm
[ 19.164] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 19.164] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 19.164] (II) Using input driver 'evdev' for 'Video Bus'
[ 19.164] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.164] (**) Video Bus: always reports core events
[ 19.164] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 19.164] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 19.164] (--) evdev: Video Bus: Found keys
[ 19.164] (II) evdev: Video Bus: Configuring as keyboard
[ 19.164] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7/event7"
[ 19.164] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 19.164] (**) Option "xkb_rules" "evdev"
[ 19.164] (**) Option "xkb_model" "pc105"
[ 19.164] (**) Option "xkb_layout" "fr"
[ 19.164] (**) Option "xkb_variant" "oss_latin9"
[ 19.165] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 19.165] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.165] (II) Using input driver 'evdev' for 'Power Button'
[ 19.165] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.165] (**) Power Button: always reports core events
[ 19.165] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 19.165] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.165] (--) evdev: Power Button: Found keys
[ 19.165] (II) evdev: Power Button: Configuring as keyboard
[ 19.165] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0/event0"
[ 19.165] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 19.165] (**) Option "xkb_rules" "evdev"
[ 19.165] (**) Option "xkb_model" "pc105"
[ 19.165] (**) Option "xkb_layout" "fr"
[ 19.165] (**) Option "xkb_variant" "oss_latin9"
[ 19.165] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 19.165] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 19.165] (II) Using input driver 'evdev' for 'Video Bus'
[ 19.165] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.165] (**) Video Bus: always reports core events
[ 19.165] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 19.165] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 19.165] (--) evdev: Video Bus: Found keys
[ 19.165] (II) evdev: Video Bus: Configuring as keyboard
[ 19.165] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3a/LNXVIDEO:00/input/input6/event6"
[ 19.165] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[ 19.165] (**) Option "xkb_rules" "evdev"
[ 19.165] (**) Option "xkb_model" "pc105"
[ 19.165] (**) Option "xkb_layout" "fr"
[ 19.165] (**) Option "xkb_variant" "oss_latin9"
[ 19.165] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 19.165] (II) No input driver specified, ignoring this device.
[ 19.165] (II) This device may have been added with another device file.
[ 19.166] (II) config/udev: Adding input device HP Laser Mobile Mouse (/dev/input/event4)
[ 19.166] (**) HP Laser Mobile Mouse: Applying InputClass "evdev pointer catchall"
[ 19.166] (**) HP Laser Mobile Mouse: Applying InputClass "evdev keyboard catchall"
[ 19.166] (II) Using input driver 'evdev' for 'HP Laser Mobile Mouse'
[ 19.166] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.166] (**) HP Laser Mobile Mouse: always reports core events
[ 19.166] (**) evdev: HP Laser Mobile Mouse: Device: "/dev/input/event4"
[ 19.166] (--) evdev: HP Laser Mobile Mouse: Vendor 0x461 Product 0x4d62
[ 19.166] (--) evdev: HP Laser Mobile Mouse: Found 3 mouse buttons
[ 19.166] (--) evdev: HP Laser Mobile Mouse: Found scroll wheel(s)
[ 19.166] (--) evdev: HP Laser Mobile Mouse: Found relative axes
[ 19.166] (--) evdev: HP Laser Mobile Mouse: Found x and y relative axes
[ 19.166] (--) evdev: HP Laser Mobile Mouse: Found absolute axes
[ 19.166] (II) evdev: HP Laser Mobile Mouse: Forcing absolute x/y axes to exist.
[ 19.166] (--) evdev: HP Laser Mobile Mouse: Found keys
[ 19.166] (II) evdev: HP Laser Mobile Mouse: Configuring as mouse
[ 19.166] (II) evdev: HP Laser Mobile Mouse: Configuring as keyboard
[ 19.166] (II) evdev: HP Laser Mobile Mouse: Adding scrollwheel support
[ 19.166] (**) evdev: HP Laser Mobile Mouse: YAxisMapping: buttons 4 and 5
[ 19.166] (**) evdev: HP Laser Mobile Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19.166] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input4/event4"
[ 19.166] (II) XINPUT: Adding extended input device "HP Laser Mobile Mouse" (type: KEYBOARD, id 10)
[ 19.166] (**) Option "xkb_rules" "evdev"
[ 19.166] (**) Option "xkb_model" "pc105"
[ 19.166] (**) Option "xkb_layout" "fr"
[ 19.166] (**) Option "xkb_variant" "oss_latin9"
[ 19.166] (II) evdev: HP Laser Mobile Mouse: initialized for relative axes.
[ 19.166] (WW) evdev: HP Laser Mobile Mouse: ignoring absolute axes.
[ 19.166] (**) HP Laser Mobile Mouse: (accel) keeping acceleration scheme 1
[ 19.166] (**) HP Laser Mobile Mouse: (accel) acceleration profile 0
[ 19.166] (**) HP Laser Mobile Mouse: (accel) acceleration factor: 2.000
[ 19.166] (**) HP Laser Mobile Mouse: (accel) acceleration threshold: 4
[ 19.166] (II) config/udev: Adding input device HP Laser Mobile Mouse (/dev/input/mouse0)
[ 19.166] (II) No input driver specified, ignoring this device.
[ 19.166] (II) This device may have been added with another device file.
[ 19.167] (II) config/udev: Adding input device Laptop_Integrated_Webcam_HD (/dev/input/event9)
[ 19.167] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 19.167] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_HD'
[ 19.167] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.167] (**) Laptop_Integrated_Webcam_HD: always reports core events
[ 19.167] (**) evdev: Laptop_Integrated_Webcam_HD: Device: "/dev/input/event9"
[ 19.167] (--) evdev: Laptop_Integrated_Webcam_HD: Vendor 0x64e Product 0x8128
[ 19.167] (--) evdev: Laptop_Integrated_Webcam_HD: Found keys
[ 19.167] (II) evdev: Laptop_Integrated_Webcam_HD: Configuring as keyboard
[ 19.167] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input9/event9"
[ 19.167] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_HD" (type: KEYBOARD, id 11)
[ 19.167] (**) Option "xkb_rules" "evdev"
[ 19.167] (**) Option "xkb_model" "pc105"
[ 19.167] (**) Option "xkb_layout" "fr"
[ 19.167] (**) Option "xkb_variant" "oss_latin9"
[ 19.167] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 19.168] (II) No input driver specified, ignoring this device.
[ 19.168] (II) This device may have been added with another device file.
[ 19.168] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 19.168] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 19.168] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 19.168] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.168] (**) AT Translated Set 2 keyboard: always reports core events
[ 19.168] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 19.168] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 19.168] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 19.168] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 19.168] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 19.168] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 19.168] (**) Option "xkb_rules" "evdev"
[ 19.168] (**) Option "xkb_model" "pc105"
[ 19.168] (**) Option "xkb_layout" "fr"
[ 19.168] (**) Option "xkb_variant" "oss_latin9"
[ 19.169] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 19.169] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 19.169] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 19.169] (II) LoadModule: "synaptics"
[ 19.169] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 19.196] (II) Module synaptics: vendor="X.Org Foundation"
[ 19.196] compiled for 1.11.3, module version = 1.6.0
[ 19.196] Module class: X.Org XInput Driver
[ 19.196] ABI class: X.Org XInput driver, version 16.0
[ 19.196] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 19.196] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 19.196] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 19.196] (**) Option "Device" "/dev/input/event8"
[ 19.332] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 19.332] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5782
[ 19.332] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4972
[ 19.332] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 19.332] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 19.332] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 19.332] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 19.332] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 19.332] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 19.340] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[ 19.340] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 19.340] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 19.340] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 19.340] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 19.340] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 19.340] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 19.340] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 19.340] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 19.340] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 19.340] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 19.340] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 19.341] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
[ 19.341] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 19.341] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 19.341] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.341] (**) Dell WMI hotkeys: always reports core events
[ 19.341] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event5"
[ 19.341] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 19.341] (--) evdev: Dell WMI hotkeys: Found keys
[ 19.341] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 19.341] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 19.341] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[ 19.341] (**) Option "xkb_rules" "evdev"
[ 19.341] (**) Option "xkb_model" "pc105"
[ 19.341] (**) Option "xkb_layout" "fr"
[ 19.341] (**) Option "xkb_variant" "oss_latin9"
[ 24.127] (II) intel(0): EDID vendor "LGD", prod id 860
[ 24.127] (II) intel(0): Printing DDC gathered Modelines:
[ 24.127] (II) intel(0): Modeline "1366x768"x0.0 76.75 1366 1414 1446 1620 768 771 776 790 +hsync -vsync (47.4 kHz)
[ 24.127] (II) intel(0): Modeline "1366x768"x0.0 51.16 1366 1414 1446 1620 768 771 776 790 +hsync -vsync (31.6 kHz)
[ 28.679] (II) intel(0): EDID vendor "LGD", prod id 860
[ 28.679] (II) intel(0): Printing DDC gathered Modelines:
[ 28.679] (II) intel(0): Modeline "1366x768"x0.0 76.75 1366 1414 1446 1620 768 771 776 790 +hsync -vsync (47.4 kHz)
[ 28.679] (II) intel(0): Modeline "1366x768"x0.0 51.16 1366 1414 1446 1620 768 771 776 790 +hsync -vsync (31.6 kHz)
[ 32.982] (II) intel(0): EDID vendor "LGD", prod id 860
[ 32.982] (II) intel(0): Printing DDC gathered Modelines:
[ 32.982] (II) intel(0): Modeline "1366x768"x0.0 76.75 1366 1414 1446 1620 768 771 776 790 +hsync -vsync (47.4 kHz)
[ 32.982] (II) intel(0): Modeline "1366x768"x0.0 51.16 1366 1414 1446 1620 768 771 776 790 +hsync -vsync (31.6 kHz)
[ 34.183] (II) XKB: reuse xkmfile /var/lib/xkb/server-03AF3717FF3AB439A4BAABA686CCB40771CDF520.xkm
[ 48.328] (II) intel(0): EDID vendor "LGD", prod id 860
[ 48.328] (II) intel(0): Printing DDC gathered Modelines:
[ 48.328] (II) intel(0): Modeline "1366x768"x0.0 76.75 1366 1414 1446 1620 768 771 776 790 +hsync -vsync (47.4 kHz)
[ 48.328] (II) intel(0): Modeline "1366x768"x0.0 51.16 1366 1414 1446 1620 768 771 776 790 +hsync -vsync (31.6 kHz)
[ 179.432] (II) config/udev: removing device HP Laser Mobile Mouse
[ 179.432] (II) evdev: HP Laser Mobile Mouse: Close
[ 179.433] (II) UnloadModule: "evdev"
[ 179.433] (II) Unloading evdev
[ 184.141] (II) config/udev: Adding input device HP Laser Mobile Mouse (/dev/input/mouse0)
[ 184.141] (II) No input driver specified, ignoring this device.
[ 184.141] (II) This device may have been added with another device file.
[ 184.141] (II) config/udev: Adding input device HP Laser Mobile Mouse (/dev/input/event4)
[ 184.141] (**) HP Laser Mobile Mouse: Applying InputClass "evdev pointer catchall"
[ 184.141] (**) HP Laser Mobile Mouse: Applying InputClass "evdev keyboard catchall"
[ 184.141] (II) Using input driver 'evdev' for 'HP Laser Mobile Mouse'
[ 184.141] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 184.141] (**) HP Laser Mobile Mouse: always reports core events
[ 184.141] (**) evdev: HP Laser Mobile Mouse: Device: "/dev/input/event4"
[ 184.141] (--) evdev: HP Laser Mobile Mouse: Vendor 0x461 Product 0x4d62
[ 184.141] (--) evdev: HP Laser Mobile Mouse: Found 3 mouse buttons
[ 184.141] (--) evdev: HP Laser Mobile Mouse: Found scroll wheel(s)
[ 184.141] (--) evdev: HP Laser Mobile Mouse: Found relative axes
[ 184.141] (--) evdev: HP Laser Mobile Mouse: Found x and y relative axes
[ 184.141] (--) evdev: HP Laser Mobile Mouse: Found absolute axes
[ 184.141] (II) evdev: HP Laser Mobile Mouse: Forcing absolute x/y axes to exist.
[ 184.141] (--) evdev: HP Laser Mobile Mouse: Found keys
[ 184.141] (II) evdev: HP Laser Mobile Mouse: Configuring as mouse
[ 184.141] (II) evdev: HP Laser Mobile Mouse: Configuring as keyboard
[ 184.141] (II) evdev: HP Laser Mobile Mouse: Adding scrollwheel support
[ 184.141] (**) evdev: HP Laser Mobile Mouse: YAxisMapping: buttons 4 and 5
[ 184.141] (**) evdev: HP Laser Mobile Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 184.142] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input11/event4"
[ 184.142] (II) XINPUT: Adding extended input device "HP Laser Mobile Mouse" (type: KEYBOARD, id 10)
[ 184.142] (**) Option "xkb_rules" "evdev"
[ 184.142] (**) Option "xkb_model" "pc105"
[ 184.142] (**) Option "xkb_layout" "fr"
[ 184.142] (**) Option "xkb_variant" "oss_latin9"
[ 184.142] (II) evdev: HP Laser Mobile Mouse: initialized for relative axes.
[ 184.142] (WW) evdev: HP Laser Mobile Mouse: ignoring absolute axes.
[ 184.142] (**) HP Laser Mobile Mouse: (accel) keeping acceleration scheme 1
[ 184.142] (**) HP Laser Mobile Mouse: (accel) acceleration profile 0
[ 184.142] (**) HP Laser Mobile Mouse: (accel) acceleration factor: 2.000
[ 184.142] (**) HP Laser Mobile Mouse: (accel) acceleration threshold: 4
[ 368.673] (II) intel(0): EDID vendor "LGD", prod id 860
[ 368.673] (II) intel(0): Printing DDC gathered Modelines:
[ 368.673] (II) intel(0): Modeline "1366x768"x0.0 76.75 1366 1414 1446 1620 768 771 776 790 +hsync -vsync (47.4 kHz)
[ 368.673] (II) intel(0): Modeline "1366x768"x0.0 51.16 1366 1414 1446 1620 768 771 776 790 +hsync -vsync (31.6 kHz)
Merci d'avance

OCCULTHUM · Le 27/05/2012, à 14:31

       Désolé pour la place,je me suis pas très au courant :)

ArchangeGabriel · Le 28/05/2012, à 17:49

@abecidofugy : Ces messages n'ont aucune importance, ignore-les.

@OCCULTHUM : Tu peux donner le résultat des ces commandes :

lspci -vnn | grep '\''[030[02]\]'

cat /var/log/Xorg.8.log

tsndcb · Le 29/05/2012, à 16:07

@ArchangeGabriel

Pour OCCULTHUM, ayant le même portable mais avec un i7 à la place du i5, si cela peut aider à analyser, voici ce qu'il devrait de répondre :

lspci -vnn | grep '\''[030[02]\]'
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0fd1] (rev ff) (prog-if ff)

Pour les erreurs, je pense qu'il doit parler de celle-ci

[ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
[ERROR]Aborting because fallback start is disabled.

Si cela peut aider

OCCULTHUM · Le 29/05/2012, à 19:25

@ArchangeGabriel :
La première commande me retournait bien 2 cartes graphiques. Maintenant,celle-ci ne retourne plus rien !!! La seconde ne donne rien alors qu'il y a bien un Xorg.8.log mais vide !!!
Le message reçu avant arrêt brutal du pc commence bien par Failed to initialize Nvidia.......
Merci pour le boulot et pour la suite

ArchangeGabriel · Le 29/05/2012, à 20:04

Euh tu peux donner le résultat de lspci tout court ?

n_faivre · Le 29/05/2012, à 21:49

Bonjour,

De mon cote, sur un Dell XPS 14z, la situation avec 12.04 se degrade, et j'ai vraiment l'impression d'etre maso de rester sous ubuntu...
Premiererement, apres un update du kernel (3.4.0-2-generic), Bumblebee ne parvient plus a eteindre la carte Nvidia:

lspci -v -s 01:00.0
01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 520M] (rev a1) (prog-if 00 [VGA controller])
    Subsystem: Dell Device 0522
    Flags: fast devsel, IRQ 16
    Memory at b2000000 (32-bit, non-prefetchable) [size=16M]
    Memory at a0000000 (64-bit, prefetchable) [size=256M]
    Memory at b0000000 (64-bit, prefetchable) [size=32M]
    I/O ports at 4000 [size=128]
    [virtual] Expansion ROM at b3000000 [disabled] [size=512K]
    Capabilities: <access denied>
    Kernel modules: nvidia_current, nouveau, nvidiafb

Deuxiemement, il doit y avoir un bug des drivers intel qui fait que les performances sont ridiculement basses:

nathan@nathan:~$ glxspheres
Polygons in scene: 62464
Visual ID of window: 0x95
Context is Direct
OpenGL Renderer: Mesa DRI Intel(R) Sandybridge Mobile 
3.696646 frames/sec - 3.167434 Mpixels/sec
2.287240 frames/sec - 1.959798 Mpixels/sec
2.267962 frames/sec - 1.943281 Mpixels/sec

Avec l'ajout du PPA xorg-edgers, les choses s'etaient sensiblement ameliorees (carte nvidia eteinte et perf intel acceptables). Mais de nouveau, une mise a jour a tout fait crasher chez moi, j'ai du tout purger xorg-edgers pour retrouver une session graphique.
Retour a la case depart donc. Quelqu'un a t il une idee des updates specifiques dans xorg edgers qui permettent de regler ces deux problemes ?

Merci,

Nathan

ArchangeGabriel · Le 29/05/2012, à 22:08

Alors pour info, oui il y a un bug dans le Kernel 3.4 jusqu'à la rc7 (3.4.0-2 sous Ubuntu)) qui empêche de passer des périphériques PCI en D3, notamment d'éteindre la carte nVidia dans le cas de Bumblebee. Normalement corrigé dans la version finale (3.4.0-3), mais il n'existe pas encore de version correcte pour Ubuntu de ce kernel.

Effectivement, il y a un bug sous Ubuntu 12.04 avec SNA (Sandy Bridge New Acceleration), qui a été désactivé dans les paquets disponibles sur xorg-edgers. D'où les performances ridicules des cartes Intel de cette génération.

Enfin, pour le bug que tu as eu avec le PPA xorg-edgers, c'est parce que comme je le disais implicitement plus haut, le noyau 3.4.0-3 disponible n'est pas correct : tu peux le voir à sa taille, seulement 50 Mio, contre généralement 150 Mio. Je me suis fait avoir aussi, et en plus en essayant de réparer cela, n'ayant pas vu le problème, j'ai fait pas mal de dégâts, et j'ai été contraint à la réinstallation. C'est à la réinstallation, quand il a téléchargé le noyau que j'ai tilté sur la taille beaucoup trop faible par rapport à d'habitude. Et en vérifiant le contenu de l'archive, j'ai vu qu'il manquait en gros tous les drivers, d'où les gros problèmes que ça a pu causer.

Du coup là je suis reparti en xorg-edgers, mais je me suis contenté du noyau 3.4.0-2 (toujours disponible), et je n'ai par contre pas de désactivation de la carte graphique du coup.

Nepenthes · Le 29/05/2012, à 22:45

Même souci avec le noyau xorg-edgers le plus récent : j'ai compris le souci quand j'ai remarqué qu'outre la résolution de 800x600, je n'avais plus de son, ni de wifi.

J'ai testé le driver intel compilé avec SNA, c'est une catastrophe, plein d'artefacts partout.

@ArchangeGabriel : plus d'infos sur l'impact des nouveautés du noyau 3.5 ? DMA-BUF est intégré, avec le support des pilotes intel et nouveau, et les modifications de xorg allant avec ces nouveautés (GPu hotpluging) arrivent dans xorg-edgers. Concrètement, sachant qu'on dispose de bbswitch pour gérer la carte nvidia, il reste quoi à faire pour avoir l'accélération graphique sur la carte nvidia sans passer par VirtualGL ?

Dernière modification par Nepenthes (Le 30/05/2012, à 02:11)

OCCULTHUM · Le 30/05/2012, à 09:30

Bonjour Voici :

      ray@ALIEN ~ $ lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4)
00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4)
00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4)
00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04)
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 0fd1 (rev ff)
07:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0)
08:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)
09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01)
09:00.1 SD Host controller: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01)
ray@ALIEN ~ $

OCCULTHUM · Le 30/05/2012, à 09:42

@ArchangeGabriel :
Le message reçu est à peu près celui-ci :
Failed to initialize the nvidia GPU to the port at PC1:1:0:0. Et puis coupure brutale.
J'ai changé de DD et modifié dans le Bios RAID (?) par AHCI.
En remettant comme à l'origine ( F9),impossible de démarrer sur Seven !
Je suis sous Mint 13 Mate avec 3.2.0-23.
Merci pour tout à tous.

joss2801 · Le 30/05/2012, à 17:48

Bonjour,

Juste un petit mot @ArchangeGabriel, et à tous les dev de ce projet : MERCI !! (désolé de crier :$) c'est un plaisir de pouvoir switcher et eteindre la carte Nvidia

Juste une petite question : l'arrivé de bumblebee-ui (en paquet) est prévu ou pas encore? dans tous les cas merci beaucoup pour votre travail

tsndcb · Le 30/05/2012, à 18:35

@ArchangeGabriel

Ayant un petit peu de temps à y consacrer (et en plus c'est pas tout les jours qu'on peu aider le développeur français à perfectionner son package) et ayant à peu près la même configuration que OCCULTHUM (AW M14xR2 i7 Nvidia GT650M)

Je tourne d'habitude sous debian, mais pour faire avancer le chmilblic (si c'est possible), je viens de faire une fresh install d'ubuntu 12-04 et d'installer bumblebee.

voici ce que cela donne après reboot :

lspci -vnn | grep '\''[030[02]\]'
00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0fd1] (rev ff) (prog-if ff)

glxspheres => OK

glxspheres
Polygons in scene: 62464
Visual ID of window: 0xa5
Context is Direct
OpenGL Renderer: Mesa DRI Intel(R) Ivybridge Mobile 
59.741523 frames/sec - 54.548790 Mpixels/sec
59.995943 frames/sec - 54.781096 Mpixels/sec
60.081003 frames/sec - 54.858763 Mpixels/sec
59.969422 frames/sec - 54.756880 Mpixels/sec
60.002668 frames/sec - 54.787236 Mpixels/sec

Par contre optirun glxspheres => KO

optirun glxspheres
[ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please

[ERROR]Aborting because fallback start is disabled.

Voici quelques informations complémentaires :

optirun -vv glxinfo
[DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[DEBUG]Process /sbin/modinfo started, PID 2360.
[DEBUG]Hiding stderr for execution of /sbin/modinfo
[DEBUG]SIGCHILD received, but wait failed with No child processes
[DEBUG]Detected nvidia driver (module nvidia-current)
[DEBUG]Active configuration:
[DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[DEBUG] X display: :8
[DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-current:/usr/lib32/nvidia-current
[DEBUG] Socket path: /var/run/bumblebee.socket
[DEBUG] VGL Compression: proxy
[DEBUG]optirun version 3.0 starting...
[INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please

[ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please

[DEBUG]Socket closed.
[ERROR]Aborting because fallback start is disabled.
[DEBUG]Killing all remaining processes.

cat /var/log/Xorg.8.log
[   151.498] 
X.Org X Server 1.11.3
Release Date: 2011-12-16
[   151.498] X Protocol Version 11, Revision 0
[   151.498] Build Operating System: Linux 2.6.24-29-server x86_64 Ubuntu
[   151.498] Current Operating System: Linux 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64
[   151.498] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-23-generic root=UUID=54377a5f-6d86-4025-a9f2-73c47df34796 ro quiet splash vt.handoff=7
[   151.498] Build Date: 05 April 2012  04:32:37AM
[   151.498] xorg-server 2:1.11.4-0ubuntu10 (For technical support please see http://www.ubuntu.com/support) 
[   151.498] Current version of pixman: 0.24.4
[   151.498]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   151.498] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   151.498] (==) Log file: "/var/log/Xorg.8.log", Time: Wed May 30 18:04:34 2012
[   151.498] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[   151.498] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   151.498] (==) ServerLayout "Layout0"
[   151.498] (==) No screen section available. Using defaults.
[   151.498] (**) |-->Screen "Default Screen Section" (0)
[   151.498] (**) |   |-->Monitor "<default monitor>"
[   151.498] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
[   151.498] (**) |   |-->Device "Device1"
[   151.498] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[   151.498] (**) Option "AutoAddDevices" "false"
[   151.498] (**) Not automatically adding devices
[   151.498] (==) Automatically enabling devices
[   151.498] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   151.498]     Entry deleted from font path.
[   151.498] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   151.498]     Entry deleted from font path.
[   151.498] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   151.498]     Entry deleted from font path.
[   151.498] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   151.498]     Entry deleted from font path.
[   151.498] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   151.498]     Entry deleted from font path.
[   151.498] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[   151.498]     Entry deleted from font path.
[   151.498] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[   151.498] (++) ModulePath set to "/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules"
[   151.498] (==) |-->Input Device "<default pointer>"
[   151.498] (==) |-->Input Device "<default keyboard>"
[   151.498] (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
[   151.498] (==) The core keyboard device wasn't specified explicitly in the layout.
    Using the default keyboard configuration.
[   151.498] (II) Loader magic: 0x7f504b3d6b00
[   151.498] (II) Module ABI versions:
[   151.498]     X.Org ANSI C Emulation: 0.4
[   151.498]     X.Org Video Driver: 11.0
[   151.498]     X.Org XInput driver : 16.0
[   151.498]     X.Org Server Extension : 6.0
[   151.499] (--) PCI:*(0:1:0:0) 10de:0fd1:1028:0552 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[   151.499] (II) Open ACPI successful (/var/run/acpid.socket)
[   151.499] (II) LoadModule: "extmod"
[   151.499] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   151.499] (II) Module extmod: vendor="X.Org Foundation"
[   151.499]     compiled for 1.11.3, module version = 1.0.0
[   151.499]     Module class: X.Org Server Extension
[   151.499]     ABI class: X.Org Server Extension, version 6.0
[   151.499] (II) Loading extension MIT-SCREEN-SAVER
[   151.499] (II) Loading extension XFree86-VidModeExtension
[   151.499] (II) Loading extension XFree86-DGA
[   151.499] (II) Loading extension DPMS
[   151.499] (II) Loading extension XVideo
[   151.499] (II) Loading extension XVideo-MotionCompensation
[   151.499] (II) Loading extension X-Resource
[   151.499] (II) LoadModule: "dbe"
[   151.500] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   151.500] (II) Module dbe: vendor="X.Org Foundation"
[   151.500]     compiled for 1.11.3, module version = 1.0.0
[   151.500]     Module class: X.Org Server Extension
[   151.500]     ABI class: X.Org Server Extension, version 6.0
[   151.500] (II) Loading extension DOUBLE-BUFFER
[   151.500] (II) LoadModule: "glx"
[   151.500] (II) Loading /usr/lib/nvidia-current/xorg/libglx.so
[   151.565] (II) Module glx: vendor="NVIDIA Corporation"
[   151.565]     compiled for 4.0.2, module version = 1.0.0
[   151.565]     Module class: X.Org Server Extension
[   151.565] (II) NVIDIA GLX Module  295.53  Fri May 11 23:49:08 PDT 2012
[   151.565] (II) Loading extension GLX
[   151.565] (II) LoadModule: "record"
[   151.565] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   151.566] (II) Module record: vendor="X.Org Foundation"
[   151.566]     compiled for 1.11.3, module version = 1.13.0
[   151.566]     Module class: X.Org Server Extension
[   151.566]     ABI class: X.Org Server Extension, version 6.0
[   151.566] (II) Loading extension RECORD
[   151.566] (II) LoadModule: "dri"
[   151.566] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   151.566] (II) Module dri: vendor="X.Org Foundation"
[   151.566]     compiled for 1.11.3, module version = 1.0.0
[   151.566]     ABI class: X.Org Server Extension, version 6.0
[   151.566] (II) Loading extension XFree86-DRI
[   151.566] (II) LoadModule: "dri2"
[   151.566] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   151.566] (II) Module dri2: vendor="X.Org Foundation"
[   151.566]     compiled for 1.11.3, module version = 1.2.0
[   151.566]     ABI class: X.Org Server Extension, version 6.0
[   151.566] (II) Loading extension DRI2
[   151.566] (II) LoadModule: "nvidia"
[   151.566] (II) Loading /usr/lib/nvidia-current/xorg/nvidia_drv.so
[   151.573] (II) Module nvidia: vendor="NVIDIA Corporation"
[   151.574]     compiled for 4.0.2, module version = 1.0.0
[   151.574]     Module class: X.Org Video Driver
[   151.576] (II) LoadModule: "mouse"
[   151.576] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[   151.577] (II) Module mouse: vendor="X.Org Foundation"
[   151.577]     compiled for 1.11.3, module version = 1.7.1
[   151.577]     Module class: X.Org XInput Driver
[   151.577]     ABI class: X.Org XInput driver, version 16.0
[   151.577] (II) LoadModule: "kbd"
[   151.577] (WW) Warning, couldn't open module kbd
[   151.577] (II) UnloadModule: "kbd"
[   151.577] (II) Unloading kbd
[   151.577] (EE) Failed to load module "kbd" (module does not exist, 0)
[   151.577] (II) NVIDIA dlloader X Driver  295.53  Fri May 11 23:29:56 PDT 2012
[   151.577] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   151.578] (--) using VT number 7

[   151.578] (II) Loading sub module "fb"
[   151.578] (II) LoadModule: "fb"
[   151.578] (II) Loading /usr/lib/xorg/modules/libfb.so
[   151.578] (II) Module fb: vendor="X.Org Foundation"
[   151.578]     compiled for 1.11.3, module version = 1.0.0
[   151.578]     ABI class: X.Org ANSI C Emulation, version 0.4
[   151.578] (II) Loading sub module "wfb"
[   151.578] (II) LoadModule: "wfb"
[   151.578] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   151.580] (II) Module wfb: vendor="X.Org Foundation"
[   151.580]     compiled for 1.11.3, module version = 1.0.0
[   151.580]     ABI class: X.Org ANSI C Emulation, version 0.4
[   151.580] (II) Loading sub module "ramdac"
[   151.580] (II) LoadModule: "ramdac"
[   151.580] (II) Module "ramdac" already built-in
[   151.581] (II) Loading /usr/lib/nvidia-current/xorg/nvidia_drv.so
[   151.581] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   151.581] (II) Loading /usr/lib/xorg/modules/libfb.so
[   151.582] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[   151.582] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[   151.582] (==) NVIDIA(0): RGB weight 888
[   151.582] (==) NVIDIA(0): Default visual is TrueColor
[   151.582] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   151.582] (**) NVIDIA(0): Option "NoLogo" "true"
[   151.582] (**) NVIDIA(0): Option "UseEDID" "false"
[   151.582] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP"
[   151.582] (**) NVIDIA(0): Enabling 2D acceleration
[   151.582] (**) NVIDIA(0): ConnectedMonitor string: "DFP"
[   151.582] (**) NVIDIA(0): Ignoring EDIDs
[   159.309] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please
[   159.309] (EE) NVIDIA(0):     check your system's kernel log for additional error
[   159.309] (EE) NVIDIA(0):     messages and refer to Chapter 8: Common Problems in the
[   159.309] (EE) NVIDIA(0):     README for additional information.
[   159.309] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[   159.309] (II) UnloadModule: "nvidia"
[   159.309] (II) Unloading nvidia
[   159.309] (II) UnloadModule: "wfb"
[   159.309] (II) Unloading wfb
[   159.309] (II) UnloadModule: "fb"
[   159.309] (II) Unloading fb
[   159.309] (EE) Screen(s) found, but none have a usable configuration.
[   159.309] 
Fatal server error:
[   159.309] no screens found
[   159.309] 
Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
[   159.309] Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[   159.309] 
[   159.309]  ddxSigGiveUp: Closing log
[   159.309] Server terminated with error (1). Closing log file.

lspci
00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4)
00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4)
00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4)
00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 0fd1 (rev ff)
07:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0)
08:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)
09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01)
09:00.1 SD Host controller: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01)

lspci -v -s 01:00.0
01:00.0 VGA compatible controller: NVIDIA Corporation Device 0fd1 (rev ff) (prog-if ff)
    !!! Unknown header type 7f
    Kernel driver in use: nvidia

kernel d'origine :

uname -a
Linux 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

Je n'ai pas de fichier /etc/X11/xorg.conf, j'espère avoir donné tout les renseignements nécessaire, si ce n'est pas le cas, ne pas hésiter à le demander.

[Edit] Une chose que j'ai également remarqué, le DisplayPort, ne semble pas supporté [/Edit]

Dernière modification par tsndcb (Le 30/05/2012, à 18:56)

ArchangeGabriel · Le 30/05/2012, à 22:17

@Nepenthes : Non pas beaucoup d'informations utiles pour le moment, il faudra voir ce que ça donnera avec les premières rc du kernel 3.5, les drivers correspondant et X.org. Peu de chance que ça arrive tout de suite dans xorg-edgers, pour le moment c'est X.org 1.12, sorti aujourd'hui d'ailleurs, et les changements de David Airlie ont peu de chances d'être intégrés dans 1.13 qui serait déjà en feature freeze, ni même dans 1.14 car en réalité les changements sont énormes (et notamment cassent tous les drivers existants qui doivent être modifiés en conséquence), et il y a de gros soucis de reviewing au niveau de l'équipe en charge de X.org. Du coup c'est pas vraiment pour tout de suite non plus.

@OCCULTHUM, tsndcb : Bien et ben il va me falloir /var/log/syslog de vos machines pour avancer. Je ne sais pas si vous pouvez le copier quelque part sur le web, sinon envoyez-le moi par mail (faites un MP, je vous répondrai et vous aurez mon email). tsndcb : Et sous Debian ça fonctionne ?

@joss2801 : Prévu, oui et non. C'est-à-dire que oui, c'est dans nos plans, mais non, ça n'est pas pour tout de suite. Le développement est un peu au point mort actuellement, et je suis overbooké au moins jusqu'au 2 août en ce qui me concerne... Et après je vais peut-être partir en vacances, je n'en ai pas prises depuis ... l'été dernier (où je n'avais d'ailleurs pris que 3 semaines).

tsndcb · Le 31/05/2012, à 07:28

ArchangeGabriel a écrit :

@OCCULTHUM, tsndcb : Bien et ben il va me falloir /var/log/syslog de vos machines pour avancer. Je ne sais pas si vous pouvez le copier quelque part sur le web, sinon envoyez-le moi par mail (faites un MP, je vous répondrai et vous aurez mon email). tsndcb : Et sous Debian ça fonctionne ?

@ArchangeGabriel] : fichier envoyé

Dernière modification par tsndcb (Le 31/05/2012, à 07:47)

joss2801 · Le 31/05/2012, à 10:43

@ArchangeGabriel : aucun soucis je te remercie pour tout ce travail

OCCULTHUM · Le 31/05/2012, à 15:49

@archangeGabriel :

Désolé,mais je sais pas ce qu'est un MP.
( A part Military Police .)
Merci pour tout.

OCCULTHUM · Le 31/05/2012, à 15:54

@ArchangeGabriel :
Par contre le dossier est très court !
ray@ALIEN ~ $ cat /var/log/syslog
May 31 15:43:29 ALIEN rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="681" x-info="http://www.rsyslog.com"] rsyslogd was HUPed
May 31 15:43:38 ALIEN anacron[1026]: Job `cron.daily' terminated
May 31 15:43:38 ALIEN anacron[1026]: Normal exit (1 job run)
Merci d'avance.

ArchangeGabriel · Le 31/05/2012, à 19:36

@OCCULTHUM : MP=Message Privé. Mais j'ai déjà celui de tsndcb, et apparemment le tiens est bien vide pour un fichier supposer faire quelques milliers de lignes...

Dernière modification par ArchangeGabriel (Le 31/05/2012, à 19:36)

Nepenthes · Le 01/06/2012, à 22:36

@ArchangeGabriel : puisqu'on va devoir se servir de virtualGL encore un certain temps, serait-il possible de créer un base de donnée de ce qui fonctionne ou pas avec optirun ?
Cette idée m'est venue avec la sortie du dernier humble bundle. Beaucoup de jeux embarquent leurs propres bibliothèques et celles-ci sont chargées par leur script de lancement. Le problème, c'est qu'optirun utilise une méthode similaire forcer l'utilisation du pilote nvidia. D'où un certain nombre de jeux qui plantent au démarrage pour des problèmes de bibliothèques non trouvées.
L'idée en général est de faire un symlink du dossier de bibliothèques du jeu dans les dossiers de bibliothèques du système (afin que tout soit au même endroit), puis de supprimer le chargement des bibliothèques dans le script de démarrage du jeu. Puis insérer la commande "optirun" et tout roule.

Quel serait le meilleur endroit pour regrouper ces astuces ?

thanatonpatisas1 · Le 02/06/2012, à 13:50

Merci pour tout cet énorme travail. J'étais concerné par le problème posé par la technologie hybride nVidia optimus : pas d'effets 3d ! J'ai installé Bumblebee et tout roule nickel. Toutefois j'avais un problème de mise en veille qui ne fonctionnait pas sur mon Asus x53s tournant avec ubuntu 12.04 lts. Je n'ai pas réessayé de remettre en veille depuis que j'ai installé Bumblebee car si le problème persiste c'est embêtant, il faut que j'éteigne à la sauvage car je me retrouve devant un écran noir qui ne veut rien savoir ! Au premier redémarrage sauvage même écran noir. Il faut que je redémarre une 2ème fois pour retrouver l'écran Asus et puis le choix des OS du dual-boot.
Pensez-vous que Bumblebee à réglé ce problème de mise en veille, ou bien cela est-il lié à autre chose qu'à la gestion des carte graphique intel et nVidia ? Un grand merci encore !
EDIT : Je viens quand même d'essayer la mise en veille, le problème persiste. Je vais chercher ailleurs, mais si quelqu'un à une idée toute même...
Merci d'avance;

Dernière modification par thanatonpatisas1 (Le 02/06/2012, à 14:00)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1676 Le 26/05/2012, à 12:39

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1677 Le 26/05/2012, à 13:04

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1678 Le 26/05/2012, à 17:07

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1679 Le 26/05/2012, à 19:57

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1680 Le 27/05/2012, à 14:27

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1681 Le 27/05/2012, à 14:31

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1682 Le 28/05/2012, à 17:49

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1683 Le 29/05/2012, à 16:07

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1684 Le 29/05/2012, à 19:25

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1685 Le 29/05/2012, à 20:04

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1686 Le 29/05/2012, à 21:49

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1687 Le 29/05/2012, à 22:08

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1688 Le 29/05/2012, à 22:45

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1689 Le 30/05/2012, à 09:30

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1690 Le 30/05/2012, à 09:42

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1691 Le 30/05/2012, à 17:48

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1692 Le 30/05/2012, à 18:35

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1693 Le 30/05/2012, à 22:17

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1694 Le 31/05/2012, à 07:28

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1695 Le 31/05/2012, à 10:43

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1696 Le 31/05/2012, à 15:49

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1697 Le 31/05/2012, à 15:54

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1698 Le 31/05/2012, à 19:36

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1699 Le 01/06/2012, à 22:36

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#1700 Le 02/06/2012, à 13:50

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

Pied de page des forums