#1 Le 28/05/2007, à 17:46
- xaxou
Problème Dongle XG 703A et Disque Dur externe
Bonjour a tous,
je suis relativement nouveau dans le monde d'ubuntu donc je vous prie de bien vouloir m'excuser si je pose une (ou plusieurs) question(s) stupide(s).
Alors voila le probleme: depuis que je suis passe a feisty, des que je branche mon disque dur externe, je perds la connection internet. La led de la cle wifi reste pourtant allumee, mais il m'est impossible d'acceder a internet. lorsque je fais un iwconfig, on m'apprend que je n'ai plus d'access point.
A noter aussi, et je ne sais pas si c'est lie, mais je suis oblige de redemarrer le pc pour qu'ubuntu detecte correctement la cle: au premier demarrage, la led du dongle clignote mais ne reste pas allumee.
merci d'avance
#2 Le 28/05/2007, à 18:01
- tartampion
Re : Problème Dongle XG 703A et Disque Dur externe
il s'agit de deux ports separes. (et merci d'essayer de m'aider)
Dernière modification par tartampion (Le 28/05/2007, à 18:02)
Hors ligne
#3 Le 28/05/2007, à 19:48
- tartampion
Re : Problème Dongle XG 703A et Disque Dur externe
[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Wed May 23 01:46:23 UTC 2007 (Ubuntu 2.6.20-16.28-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000000fef0000 end: 000000000fff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000fff0000 size: 0000000000003000 end: 000000000fff3000 type: 4
[ 0.000000] copy_e820_map() start: 000000000fff3000 size: 000000000000d000 end: 0000000010000000 type: 3
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 65520) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 65520
[ 0.000000] HighMem 65520 -> 65520
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 65520
[ 0.000000] On node 0 totalpages: 65520
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 479 pages used for memmap
[ 0.000000] Normal zone: 60945 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x000f6d60
[ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
[ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
[ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff74c0
[ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:8 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
[ 0.000000] Detected 1464.446 MHz processor.
[ 15.984523] Built 1 zonelists. Total pages: 65009
[ 15.984528] Kernel command line: root=UUID=567b9ac0-5f07-4028-8926-8d8a604d32e1 ro quiet splash
[ 15.984745] mapped APIC to ffffd000 (fee00000)
[ 15.984748] mapped IOAPIC to ffffc000 (fec00000)
[ 15.984752] Enabling fast FPU save and restore... done.
[ 15.984755] Enabling unmasked SIMD FPU exception support... done.
[ 15.984767] Initializing CPU#0
[ 15.984837] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 15.986161] Console: colour VGA+ 80x25
[ 15.986373] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 15.986537] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 15.993792] Memory: 246712k/262080k available (1992k kernel code, 14864k reserved, 896k data, 328k init, 0k highmem)
[ 15.993806] virtual kernel memory layout:
[ 15.993807] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 15.993809] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.993811] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 15.993813] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
[ 15.993815] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 15.993816] .data : 0xc02f2354 - 0xc03d26d4 ( 896 kB)
[ 15.993818] .text : 0xc0100000 - 0xc02f2354 (1992 kB)
[ 15.993822] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 16.072817] Calibrating delay using timer specific routine.. 2931.43 BogoMIPS (lpj=5862871)
[ 16.072870] Security Framework v1.0.0 initialized
[ 16.072879] SELinux: Disabled at boot.
[ 16.072899] Mount-cache hash table entries: 512
[ 16.073078] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[ 16.073090] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 16.073094] CPU: L2 Cache: 256K (64 bytes/line)
[ 16.073097] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[ 16.073110] Compat vDSO mapped to ffffe000.
[ 16.073117] Remapping vsyscall page to ffffe000
[ 16.073128] Checking 'hlt' instruction... OK.
[ 16.088957] SMP alternatives: switching to UP code
[ 16.089266] Freeing SMP alternatives: 11k freed
[ 16.089571] Early unpacking initramfs... done
[ 16.564266] ACPI: Core revision 20060707
[ 16.571207] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 16.574643] CPU0: AMD Athlon(tm) XP 1700+ stepping 01
[ 16.574670] Total of 1 processors activated (2931.43 BogoMIPS).
[ 16.574874] ENABLING IO-APIC IRQs
[ 16.575072] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 16.720692] Brought up 1 CPUs
[ 16.721016] Booting paravirtualized kernel on bare hardware
[ 16.721102] Time: 15:26:37 Date: 04/28/107
[ 16.721149] NET: Registered protocol family 16
[ 16.721276] EISA bus registered
[ 16.721282] ACPI: bus type pci registered
[ 16.753494] PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=3
[ 16.753497] PCI: Using configuration type 1
[ 16.753499] Setting up standard PCI resources
[ 16.767800] ACPI: Interpreter enabled
[ 16.767805] ACPI: Using IOAPIC for interrupt routing
[ 16.768590] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 16.768598] PCI: Probing PCI hardware (bus 00)
[ 16.768928] PCI: nForce2 C1 Halt Disconnect fixup
[ 16.769863] Boot video device is 0000:03:00.0
[ 16.769970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 16.850403] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 16.851084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 16.851369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB1._PRT]
[ 16.852566] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 16.852965] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 16.853339] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 16.853717] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 16.854094] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 16.854482] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 16.854861] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 16.855238] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 16.855614] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 16.855996] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 16.856373] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 16.856760] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 16.857141] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 16.857524] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 16.857906] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 16.858288] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 16.858640] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[ 16.858983] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[ 16.859315] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[ 16.859646] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[ 16.859979] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 16.860411] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[ 16.860876] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[ 16.861302] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[ 16.861737] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 16.862164] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[ 16.862587] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 16.862917] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[ 16.863336] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[ 16.863771] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 16.864194] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 16.864648] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 16.868984] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 16.869002] pnp: PnP ACPI init
[ 16.876580] pnp: PnP ACPI: found 17 devices
[ 16.876591] PnPBIOS: Disabled by ACPI PNP
[ 16.876688] PCI: Using ACPI for IRQ routing
[ 16.876697] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 16.945909] NET: Registered protocol family 8
[ 16.945912] NET: Registered protocol family 20
[ 16.946690] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[ 16.946695] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[ 16.946699] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[ 16.946703] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[ 16.946707] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[ 16.946710] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[ 16.946719] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[ 16.946722] pnp: 00:01: ioport range 0x5500-0x553f has been reserved
[ 16.947107] PCI: Bridge: 0000:00:08.0
[ 16.947110] IO window: disabled.
[ 16.947116] MEM window: disabled.
[ 16.947121] PREFETCH window: disabled.
[ 16.947127] PCI: Bridge: 0000:00:0c.0
[ 16.947130] IO window: 9000-9fff
[ 16.947136] MEM window: e6000000-e7ffffff
[ 16.947140] PREFETCH window: 20000000-200fffff
[ 16.947147] PCI: Bridge: 0000:00:1e.0
[ 16.947150] IO window: a000-afff
[ 16.947155] MEM window: e4000000-e5ffffff
[ 16.947160] PREFETCH window: d0000000-dfffffff
[ 16.947173] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 16.947181] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 16.947220] NET: Registered protocol family 2
[ 16.980677] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 16.980780] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 16.980890] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 16.980946] TCP: Hash tables configured (established 8192 bind 4096)
[ 16.980950] TCP reno registered
[ 16.992720] checking if image is initramfs... it is
[ 17.901743] Freeing initrd memory: 8914k freed
[ 17.902384] audit: initializing netlink socket (disabled)
[ 17.902402] audit(1180365998.000:1): initialized
[ 17.902540] VFS: Disk quotas dquot_6.5.1
[ 17.902565] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 17.902628] io scheduler noop registered
[ 17.902631] io scheduler anticipatory registered
[ 17.902634] io scheduler deadline registered
[ 17.902644] io scheduler cfq registered (default)
[ 17.903011] isapnp: Scanning for PnP cards...
[ 18.257473] isapnp: No Plug & Play device found
[ 18.294750] Real Time Clock Driver v1.12ac
[ 18.294823] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 18.294983] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.295283] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.296134] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.296629] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.297022] mice: PS/2 mouse device common for all mice
[ 18.297715] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 18.298037] input: Macintosh mouse button emulation as /class/input/input0
[ 18.298085] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 18.298091] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 18.298356] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 18.301315] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.301323] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.301518] EISA: Probing bus 0 at eisa.0
[ 18.301544] Cannot allocate resource for EISA slot 4
[ 18.301548] Cannot allocate resource for EISA slot 5
[ 18.301565] EISA: Detected 0 cards.
[ 18.331676] TCP cubic registered
[ 18.331684] NET: Registered protocol family 1
[ 18.331714] Using IPI No-Shortcut mode
[ 18.331795] ACPI: (supports S0 S1 S4 S5)
[ 18.331858] Magic number: 7:64:438
[ 18.332178] Time: tsc clocksource has been installed.
[ 18.332543] Freeing unused kernel memory: 328k freed
[ 18.346107] input: AT Translated Set 2 keyboard as /class/input/input1
[ 19.611859] Capability LSM initialized
[ 20.376118] usbcore: registered new interface driver usbfs
[ 20.376160] usbcore: registered new interface driver hub
[ 20.376196] usbcore: registered new device driver usb
[ 20.377249] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 20.377842] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 20.377855] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16
[ 20.377872] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 20.377877] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 20.378067] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 20.378093] ohci_hcd 0000:00:02.0: irq 16, io mem 0xe8080000
[ 20.402556] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[ 20.475750] ieee1394: Initialized config rom entry `ip1394'
[ 20.500029] usb usb1: configuration #1 chosen from 1 choice
[ 20.500072] hub 1-0:1.0: USB hub found
[ 20.500088] hub 1-0:1.0: 3 ports detected
[ 20.582525] SCSI subsystem initialized
[ 20.589627] libata version 2.20 loaded.
[ 20.604334] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 20.604348] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 21 (level, high) -> IRQ 17
[ 20.604370] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 20.604374] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 20.604407] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 2
[ 20.604450] ehci_hcd 0000:00:02.2: selective suspend/wakeup unavailable
[ 20.604459] ehci_hcd 0000:00:02.2: debug port 1
[ 20.604465] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 20.604479] ehci_hcd 0000:00:02.2: irq 17, io mem 0xe8086000
[ 20.604488] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.604590] usb usb2: configuration #1 chosen from 1 choice
[ 20.604627] hub 2-0:1.0: USB hub found
[ 20.604640] hub 2-0:1.0: 6 ports detected
[ 20.677461] Floppy drive(s): fd0 is 1.44M
[ 20.708509] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[ 20.708523] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 20 (level, high) -> IRQ 18
[ 20.708532] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 20.747329] FDC 0 is a post-1991 82077
[ 21.183472] usb 2-4: new high speed USB device using ehci_hcd and address 3
[ 21.223722] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
[ 21.224388] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22
[ 21.224394] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 22 (level, high) -> IRQ 16
[ 21.224403] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 21.276830] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[e8084000-e80847ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 21.282563] ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 21
[ 21.282570] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [AP3C] -> GSI 21 (level, high) -> IRQ 17
[ 21.282580] 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
[ 21.282589] 0000:02:01.0: 3Com PCI 3c920 Tornado at d084a000.
[ 21.309067] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[ 21.309100] NFORCE2: chipset revision 162
[ 21.309104] NFORCE2: not 100% native mode: will probe irqs later
[ 21.309110] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
[ 21.309118] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[ 21.309131] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[ 21.309145] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[ 21.309154] Probing IDE interface ide0...
[ 21.351374] usb 2-4: configuration #1 chosen from 1 choice
[ 21.595477] hda: Maxtor 6Y080L0, ATA DISK drive
[ 21.655345] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 21.859327] usb 1-1: configuration #1 chosen from 1 choice
[ 22.267460] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 22.277798] Probing IDE interface ide1...
[ 23.015105] hdc: ATAPI DVDROM 16X, ATAPI CD/DVD-ROM drive
[ 23.798896] hdd: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM drive
[ 23.855293] ide1 at 0x170-0x177,0x376 on irq 15
[ 23.860173] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
[ 23.860182] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 18
[ 23.860203] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 23.860208] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 23.860581] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[ 23.860612] ohci_hcd 0000:00:02.1: irq 18, io mem 0xe8083000
[ 23.870444] hda: max request size: 128KiB
[ 23.890099] hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[ 23.891942] hda: cache flushes supported
[ 23.892010] hda: hda1 hda2 <<6>usb usb3: configuration #1 chosen from 1 choice
[ 23.916927] hub 3-0:1.0: USB hub found
[ 23.916943] hub 3-0:1.0: 3 ports detected
[ 23.922131] hda5 >
[ 23.935106] hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
[ 23.935117] Uniform CD-ROM driver Revision: 3.20
[ 23.936774] hdd: ATAPI 12X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 24.228790] Attempting manual resume
[ 24.228795] swsusp: Resume From Partition 3:5
[ 24.228798] PM: Checking swsusp image.
[ 24.229080] PM: Resume from disk failed.
[ 24.285482] kjournald starting. Commit interval 5 seconds
[ 24.285499] EXT3-fs: mounted filesystem with ordered data mode.
[ 33.469041] eth1: setting half-duplex.
[ 33.495077] eth0: no link during initialization.
[ 34.770679] NET: Registered protocol family 17
[ 36.296428] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 36.306076] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 36.985898] Linux agpgart interface v0.102 (c) Dave Jones
[ 37.080066] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 37.080117] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
[ 37.592411] agpgart: Detected NVIDIA nForce2 chipset
[ 37.597328] agpgart: AGP aperture is 64M @ 0xe0000000
[ 37.691600] input: PC Speaker as /class/input/input2
[ 37.765663] parport: PnPBIOS parport detected.
[ 37.765735] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 38.115480] input: PS2++ Logitech Wheel Mouse as /class/input/input3
[ 38.233502] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 38.233511] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 16
[ 38.233549] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 38.438042] p54: LM86 firmware
[ 38.550891] intel8x0_measure_ac97_clock: measured 52711 usecs
[ 38.550896] intel8x0: clocking to 47440
[ 39.426791] prism54usb: probe of 2-4:1.0 failed with error -110
[ 39.581061] usbcore: registered new interface driver snd-usb-audio
[ 39.584344] usbcore: registered new interface driver prism54usb
[ 39.915581] fuse init (API version 7.8)
[ 39.959364] lp0: using parport0 (interrupt-driven).
[ 40.067432] Adding 738948k swap on /dev/disk/by-uuid/499a0b7d-5993-4dc9-b3e7-0850522513ec. Priority:-1 extents:1 across:738948k
[ 40.202626] EXT3 FS on hda1, internal journal
[ 43.296777] ndiswrapper version 1.38 loaded (preempt=no,smp=yes)
[ 43.489579] usb 2-4: reset high speed USB device using ehci_hcd and address 3
[ 43.648293] ndiswrapper: driver wlanuig (Sagem SA,06/03/2004, 3.0.18.2) loaded
[ 45.049317] wlan0: ethernet device 00:60:b3:dc:9f:e4 using NDIS driver: wlanuig, version: 0x30012, NDIS version: 0x501, vendor: 'Sagem XG703 USB 802.11g', 0CDE:0008.F.conf
[ 45.049364] wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
[ 45.051572] usbcore: registered new interface driver ndiswrapper
[ 54.106251] NET: Registered protocol family 10
[ 54.106407] lo: Disabled Privacy Extensions
[ 54.106495] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 54.106499] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 55.006590] input: Power Button (FF) as /class/input/input4
[ 55.006932] ACPI: Power Button (FF) [PWRF]
[ 55.018647] input: Power Button (CM) as /class/input/input5
[ 55.019007] ACPI: Power Button (CM) [PWRB]
[ 55.359608] ibm_acpi: ec object not found
[ 55.430618] Using specific hotkey driver
[ 55.473264] No dock devices found.
[ 55.503578] pcc_acpi: loading...
[ 60.491367] cdrom: This disc doesn't have any tracks I recognize!
[ 62.034441] [drm] Initialized drm 1.1.0 20060810
[ 62.055935] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 62.055950] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 19
[ 62.060608] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 62.934888] ppdev: user-space parallel port driver
[ 63.635098] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 63.635275] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[ 63.635483] agpgart: Putting AGP V3 device at 0000:03:00.0 into 4x mode
[ 63.949623] [drm] Setting GART location based on new memory map
[ 63.949639] [drm] Loading R300 Microcode
[ 63.949690] [drm] writeback test succeeded in 1 usecs
[ 64.482897] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 64.482904] apm: overridden by ACPI.
[ 64.796904] Bluetooth: Core ver 2.11
[ 64.797004] NET: Registered protocol family 31
[ 64.797007] Bluetooth: HCI device and connection manager initialized
[ 64.797012] Bluetooth: HCI socket layer initialized
[ 64.843944] wlan0: no IPv6 routers present
[ 64.872817] Bluetooth: L2CAP ver 2.8
[ 64.872823] Bluetooth: L2CAP socket layer initialized
[ 64.890750] Bluetooth: RFCOMM socket layer initialized
[ 64.890772] Bluetooth: RFCOMM TTY layer initialized
[ 64.890775] Bluetooth: RFCOMM ver 1.8
[ 7763.579972] usb 2-3: new high speed USB device using ehci_hcd and address 4
[ 7763.712982] usb 2-3: configuration #1 chosen from 1 choice
[ 7764.635036] usbcore: registered new interface driver libusual
[ 7764.780081] Initializing USB Mass Storage driver...
[ 7764.780219] scsi0 : SCSI emulation for USB Mass Storage devices
[ 7764.780287] usb-storage: device found at 4
[ 7764.780290] usb-storage: waiting for device to settle before scanning
[ 7764.780303] usbcore: registered new interface driver usb-storage
[ 7764.780307] USB Mass Storage support registered.
[ 7769.758471] usb-storage: device scan complete
[ 7772.763859] scsi 0:0:0:0: Direct-Access WDC WD2000BB-00GUC0 08.0 PQ: 0 ANSI: 2
[ 7772.816291] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
[ 7772.817536] sda: Write Protect is off
[ 7772.817541] sda: Mode Sense: 53 00 00 08
[ 7772.817544] sda: assuming drive cache: write through
[ 7772.819026] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
[ 7772.820152] sda: Write Protect is off
[ 7772.820156] sda: Mode Sense: 53 00 00 08
[ 7772.820159] sda: assuming drive cache: write through
[ 7772.820813] sda: sda1
[ 7772.826560] sd 0:0:0:0: Attached scsi disk sda
[ 7772.849117] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7775.238207] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 7775.239527] NTFS-fs warning (device sda1): parse_options(): Option utf8 is no longer supported, using option nls=utf8. Please use option nls=utf8 in the future and make sure utf8 is compiled either as a module or into the kernel.
[ 7775.527569] NTFS volume version 3.1.Hors ligne
#4 Le 28/05/2007, à 21:31
- tartampion
Re : Problème Dongle XG 703A et Disque Dur externe
je te remercie tout de meme, c'etait sympa d'avoir essaye.
quelqu'un d'autre a une idee?
Hors ligne
#5 Le 29/05/2007, à 14:26
- tartampion
Re : Problème Dongle XG 703A et Disque Dur externe
up?
quelqu'un a une idee?
Hors ligne