Ubuntu-fr

goy

touch pad freeze au lancement de certaines applications

Bonjour,

Mon touch pad à des problèmes avec certaines applications, souvent en rapport avec la toile.

Voici une ligne de commande qui m'a permit de voir certains problèmes de mon matériel, mais je n'ai aucune compétence qui pourrait régler le problème, c'est pourquoi je fais appel, à vous...Merci d'avance :
Les lignes correspondantes au touch pad sont à la fin, en attedant j'ai l'impression que mon pc est en sursi.... dois-je me méfier de toutes ces lignes????

goy@goycie-laptop:~$ dmesg 
[    0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000d0000 size: 0000000000030000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 0000000037da0000 end: 0000000037ea0000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 0000000037ea0000 size: 000000000000c000 end: 0000000037eac000 type: 3
[    0.000000] copy_e820_map() start: 0000000037eac000 size: 0000000000054000 end: 0000000037f00000 type: 4
[    0.000000] copy_e820_map() start: 0000000037f00000 size: 0000000008100000 end: 0000000040000000 type: 2
[    0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[    0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000037ea0000 (usable)
[    0.000000]  BIOS-e820: 0000000037ea0000 - 0000000037eac000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000037eac000 - 0000000037f00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 894MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f7c80
[    0.000000] Entering add_active_range(0, 0, 229024) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229024
[    0.000000]   HighMem    229024 ->   229024
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   229024
[    0.000000] On node 0 totalpages: 229024
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1757 pages used for memmap
[    0.000000]   Normal zone: 223171 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f7c50
[    0.000000] ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x37ea4843
[    0.000000] ACPI: FADT (v001 HP     Piranha  0x06040000 ATI  0x000f4240) @ 0x37eabe31
[    0.000000] ACPI: SSDT (v001 PTLTD  POWERNOW 0x06040000  LTP 0x00000001) @ 0x37eabea5
[    0.000000] ACPI: MADT (v001 PTLTD    APIC   0x06040000  LTP 0x00000000) @ 0x37eabf74
[    0.000000] ACPI: MCFG (v001 PTLTD    MCFG   0x06040000  LTP 0x00000000) @ 0x37eabfc4
[    0.000000] ACPI: DSDT (v001     HP     309B 0x06040000 MSFT 0x0100000e) @ 0x00000000
[    0.000000] ATI board detected. Disabling timer routing over 8254.
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:12 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[    0.000000] Detected 1790.931 MHz processor.
[   14.017938] Built 1 zonelists.  Total pages: 227235
[   14.017941] Kernel command line: root=UUID=02d54303-81f9-4d73-82d9-868d700126ef ro quiet splash
[   14.018083] mapped APIC to ffffd000 (fee00000)
[   14.018085] mapped IOAPIC to ffffc000 (fec00000)
[   14.018089] Enabling fast FPU save and restore... done.
[   14.018091] Enabling unmasked SIMD FPU exception support... done.
[   14.018097] Initializing CPU#0
[   14.018154] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   14.019115] Console: colour VGA+ 80x25
[   14.019656] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   14.020534] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   14.036580] Memory: 896832k/916096k available (1992k kernel code, 18672k reserved, 893k data, 328k init, 0k highmem)
[   14.036590] virtual kernel memory layout:
[   14.036592]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   14.036593]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   14.036594]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   14.036596]     lowmem  : 0xc0000000 - 0xf7ea0000   ( 894 MB)
[   14.036597]       .init : 0xc03d7000 - 0xc0429000   ( 328 kB)
[   14.036598]       .data : 0xc02f2264 - 0xc03d16d4   ( 893 kB)
[   14.036600]       .text : 0xc0100000 - 0xc02f2264   (1992 kB)
[   14.036603] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   14.114033] Calibrating delay using timer specific routine.. 3585.46 BogoMIPS (lpj=7170938)
[   14.114073] Security Framework v1.0.0 initialized
[   14.114079] SELinux:  Disabled at boot.
[   14.114094] Mount-cache hash table entries: 512
[   14.114218] CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001
[   14.114226] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   14.114229] CPU: L2 Cache: 128K (64 bytes/line)
[   14.114232] CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000001 00000000 00000001
[   14.114241] Compat vDSO mapped to ffffe000.
[   14.114245] Remapping vsyscall page to ffffe000
[   14.114254] Checking 'hlt' instruction... OK.
[   14.130143] SMP alternatives: switching to UP code
[   14.130432] Freeing SMP alternatives: 11k freed
[   14.130682] Early unpacking initramfs... done
[   14.452107] ACPI: Core revision 20060707
[   14.452331] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   15.088592] CPU0: AMD Mobile AMD Sempron(tm) Processor 3000+ stepping 02
[   15.088612] Total of 1 processors activated (3585.46 BogoMIPS).
[   15.088791] ENABLING IO-APIC IRQs
[   15.088987] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[   15.236562] Brought up 1 CPUs
[   15.236785] Booting paravirtualized kernel on bare hardware
[   15.236880] Time:  9:24:44  Date: 04/29/107
[   15.236912] NET: Registered protocol family 16
[   15.237016] EISA bus registered
[   15.237020] ACPI: bus type pci registered
[   15.237162] PCI: PCI BIOS revision 2.10 entry at 0xfd86c, last bus=7
[   15.237164] PCI: Using configuration type 1
[   15.237166] Setting up standard PCI resources
[   15.239431] ACPI: Interpreter enabled
[   15.239437] ACPI: Using IOAPIC for interrupt routing
[   15.239948] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   15.239955] PCI: Probing PCI hardware (bus 00)
[   15.241764] Boot video device is 0000:01:05.0
[   15.242099] PCI: Transparent bridge - 0000:00:14.4
[   15.242142] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   15.243987] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[   15.244901] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[   15.245120] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[   15.245340] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[   15.245553] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[   15.245763] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[   15.245973] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[   15.246187] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[   15.246398] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[   15.288607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[   15.288856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[   15.289313] Linux Plug and Play Support v0.97 (c) Adam Belay
[   15.289324] pnp: PnP ACPI init
[   15.316480] pnp: PnP ACPI: found 10 devices
[   15.316486] PnPBIOS: Disabled by ACPI PNP
[   15.316548] PCI: Using ACPI for IRQ routing
[   15.316551] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   15.316557] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
[   15.316560] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
[   15.332299] NET: Registered protocol family 8
[   15.332301] NET: Registered protocol family 20
[   15.332547] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[   15.332557] pnp: 00:08: ioport range 0x40b-0x40b has been reserved
[   15.332560] pnp: 00:08: ioport range 0x4d0-0x4d1 has been reserved
[   15.332562] pnp: 00:08: ioport range 0x4d6-0x4d6 has been reserved
[   15.332565] pnp: 00:08: ioport range 0x870-0x87f has been reserved
[   15.332806] PCI: Bridge: 0000:00:01.0
[   15.332809]   IO window: 9000-9fff
[   15.332813]   MEM window: c0100000-c01fffff
[   15.332816]   PREFETCH window: c8000000-cfffffff
[   15.332819] PCI: Bridge: 0000:00:05.0
[   15.332820]   IO window: disabled.
[   15.332822]   MEM window: disabled.
[   15.332825]   PREFETCH window: disabled.
[   15.332828] PCI: Bridge: 0000:00:14.4
[   15.332831]   IO window: a000-afff
[   15.332838]   MEM window: c0200000-c02fffff
[   15.332842]   PREFETCH window: disabled.
[   15.332863] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   15.332895] NET: Registered protocol family 2
[   15.368430] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   15.368634] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   15.369834] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   15.370422] TCP: Hash tables configured (established 131072 bind 65536)
[   15.370427] TCP reno registered
[   15.380472] checking if image is initramfs... it is
[   16.014490] Freeing initrd memory: 7012k freed
[   16.014906] audit: initializing netlink socket (disabled)
[   16.014920] audit(1180430683.452:1): initialized
[   16.015030] VFS: Disk quotas dquot_6.5.1
[   16.015049] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   16.015098] io scheduler noop registered
[   16.015101] io scheduler anticipatory registered
[   16.015103] io scheduler deadline registered
[   16.015110] io scheduler cfq registered (default)
[   16.015322] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   16.015344] assign_interrupt_mode Found MSI capability
[   16.015347] Allocate Port Service[0000:00:05.0:pcie00]
[   16.015480] isapnp: Scanning for PnP cards...
[   16.369471] isapnp: No Plug & Play device found
[   16.408876] Real Time Clock Driver v1.12ac
[   16.408917] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   16.409887] ACPI: PCI Interrupt 0000:00:14.6[b] -> GSI 17 (level, low) -> IRQ 16
[   16.409898] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[   16.409964] mice: PS/2 mouse device common for all mice
[   16.410400] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   16.410638] input: Macintosh mouse button emulation as /class/input/input0
[   16.410669] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   16.410673] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   16.410971] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[   16.431135] i8042.c: Detected active multiplexing controller, rev 1.1.
[   16.447774] serio: i8042 KBD port at 0x60,0x64 irq 1
[   16.447781] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   16.447783] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   16.447786] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   16.447789] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   16.448878] EISA: Probing bus 0 at eisa.0
[   16.448887] Cannot allocate resource for EISA slot 1
[   16.448916] Cannot allocate resource for EISA slot 8
[   16.448918] EISA: Detected 0 cards.
[   16.478976] TCP cubic registered
[   16.478983] NET: Registered protocol family 1
[   16.479004] Using IPI No-Shortcut mode
[   16.479073] ACPI: (supports S0 S3 S4 S5)
[   16.479115]   Magic number: 7:500:425
[   16.479540] Freeing unused kernel memory: 328k freed
[   16.482836] Time: tsc clocksource has been installed.
[   16.487673] input: AT Translated Set 2 keyboard as /class/input/input1
[   17.727944] Capability LSM initialized
[   17.771734] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   17.771742] ACPI: Processor [CPU0] (supports 8 throttling states)
[   17.780522] ACPI Exception (acpi_thermal-0412): AE_NOT_FOUND, Invalid active threshold [0] [20060707]
[    3.044000] ACPI: Thermal Zone [THRM] (0 C)
[    3.048000] Time: acpi_pm clocksource has been installed.
[    3.596000] usbcore: registered new interface driver usbfs
[    3.596000] usbcore: registered new interface driver hub
[    3.596000] usbcore: registered new device driver usb
[    3.596000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.596000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 17
[    3.596000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    3.596000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[    3.596000] ohci_hcd 0000:00:13.0: irq 17, io mem 0xc0000000
[    3.684000] usb usb1: configuration #1 chosen from 1 choice
[    3.684000] hub 1-0:1.0: USB hub found
[    3.684000] hub 1-0:1.0: 4 ports detected
[    3.788000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 17
[    3.788000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    3.788000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[    3.788000] ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0001000
[    3.792000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    3.848000] usb usb2: configuration #1 chosen from 1 choice
[    3.848000] hub 2-0:1.0: USB hub found
[    3.848000] hub 2-0:1.0: 4 ports detected
[    3.952000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 17
[    3.952000] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    3.952000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[    3.952000] ehci_hcd 0000:00:13.2: irq 17, io mem 0xc0002000
[    3.952000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.952000] usb usb3: configuration #1 chosen from 1 choice
[    3.952000] hub 3-0:1.0: USB hub found
[    3.952000] hub 3-0:1.0: 8 ports detected
[    4.056000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[    4.056000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
[    4.056000] ATIIXP: chipset revision 128
[    4.056000] ATIIXP: not 100% native mode: will probe irqs later
[    4.056000]     ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
[    4.056000]     ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
[    4.056000] Probing IDE interface ide0...
[    4.344000] hda: FUJITSU MHV2060AT PL, ATA DISK drive
[    5.016000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    5.092000] Probing IDE interface ide1...
[    5.828000] hdc: HL-DT-ST DVDRAM GSA-4082N, ATAPI CD/DVD-ROM drive
[    6.164000] ide1 at 0x170-0x177,0x376 on irq 15
[    6.172000] SCSI subsystem initialized
[    6.180000] libata version 2.20 loaded.
[    6.184000] 8139cp 0000:06:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[    6.184000] 8139cp 0000:06:06.0: Try the "8139too" driver instead.
[    6.184000] 8139too Fast Ethernet driver 0.9.28
[    6.184000] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 22 (level, low) -> IRQ 19
[    6.184000] eth0: RealTek RTL8139 at 0xf8870000, 00:0f:b0:c2:8d:ad, IRQ 19
[    6.184000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[    6.196000] hda: max request size: 128KiB
[    6.196000] hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[    6.204000] hda: cache flushes supported
[    6.204000]  hda: hda1 hda2 < hda5 hda6 > hda3
[    6.312000] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA
[    6.312000] Uniform CD-ROM driver Revision: 3.20
[    6.704000] Attempting manual resume
[    6.704000] swsusp: Resume From Partition 3:3
[    6.704000] PM: Checking swsusp image.
[    6.704000] PM: Resume from disk failed.
[    6.744000] kjournald starting.  Commit interval 5 seconds
[    6.744000] EXT3-fs: mounted filesystem with ordered data mode.
[   17.816000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   18.056000] NET: Registered protocol family 10
[   18.056000] lo: Disabled Privacy Extensions
[   19.396000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[   19.608000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   19.612000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   19.784000] ieee80211_crypt: registered algorithm 'NULL'
[   19.796000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   19.796000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   20.020000] Linux agpgart interface v0.102 (c) Dave Jones
[   20.328000] bcm43xx driver
[   20.328000] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 21 (level, low) -> IRQ 21
[   20.340000] input: PC Speaker as /class/input/input2
[   20.620000] ACPI: PCI Interrupt 0000:00:14.5[b] -> GSI 17 (level, low) -> IRQ 16
[   20.636000] ACPI: PCI Interrupt 0000:00:14.6[b] -> GSI 17 (level, low) -> IRQ 16
[   20.748000] MC'97 0 converters and GPIO not ready (0x1)
[   20.940000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[   21.008000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[   21.052000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   21.344000] fuse init (API version 7.8)
[   21.408000] lp: driver loaded but no devices found
[   21.448000] Adding 8024k swap on /dev/disk/by-uuid/833022e3-f9ac-41ab-a37e-62ee0d489180.  Priority:-1 extents:1 across:8024k
[   21.672000] EXT3 FS on hda6, internal journal
[   22.208000] NET: Registered protocol family 17
[   22.924000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[   23.008000] NTFS volume version 3.1.
[   27.488000] input: Power Button (FF) as /class/input/input4
[   27.496000] ACPI: Power Button (FF) [PWRF]
[   27.524000] input: Sleep Button (FF) as /class/input/input5
[   27.532000] ACPI: Sleep Button (FF) [SLPF]
[   27.560000] input: Lid Switch as /class/input/input6
[   27.568000] ACPI: Lid Switch [LID]
[   27.600000] input: Power Button (CM) as /class/input/input7
[   27.604000] ACPI: Power Button (CM) [PWRB]
[   27.728000] Using specific hotkey driver
[   27.784000] ACPI: AC Adapter [ACAD] (on-line)
[   27.840000] ACPI: Battery Slot [BAT1] (battery present)
[   27.848000] ibm_acpi: ec object not found
[   27.872000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   27.900000] No dock devices found.
[   27.912000] wmi_add device=f6939400
[   27.912000] calling WQBA
[   27.960000] pcc_acpi: loading...
[   28.156000] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3000+ processors (version 2.00.00)
[   28.156000] powernow-k8:    0 : fid 0xa (1800 MHz), vid 0xa
[   28.156000] powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0xc
[   28.156000] powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x13
[   28.156000] powernow-k8: ph2 null fid transition 0xa
[   28.744000] eth0: no IPv6 routers present
[   34.072000] ppdev: user-space parallel port driver
[   34.996000] apm: BIOS not found.
[   35.328000] Bluetooth: Core ver 2.11
[   35.328000] NET: Registered protocol family 31
[   35.328000] Bluetooth: HCI device and connection manager initialized
[   35.328000] Bluetooth: HCI socket layer initialized
[   35.376000] Bluetooth: L2CAP ver 2.8
[   35.376000] Bluetooth: L2CAP socket layer initialized
[   35.540000] Bluetooth: RFCOMM socket layer initialized
[   35.540000] Bluetooth: RFCOMM TTY layer initialized
[   35.540000] Bluetooth: RFCOMM ver 1.8
[  113.824000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4
[  113.828000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[  113.836000] psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.
[  113.848000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4
[  113.860000] psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.
[  113.872000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4
[  113.876000] psmouse.c: Failed to reset mouse on isa0060/serio1
[  113.880000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[  113.884000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[  113.892000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4
[  113.896000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[  113.896000] psmouse.c: issuing reconnect request
[  114.188000] input: PS/2 Generic Mouse as /class/input/input8
[  114.188000] psmouse.c: Failed to enable mouse on isa0060/serio1
[  154.720000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[  154.724000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[  154.724000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[  154.724000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[  154.728000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[  154.728000] psmouse.c: issuing reconnect request
[  877.512000] psmouse.c: Mouse at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[  877.516000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4
[  877.528000] psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.
[  877.540000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4
[  877.540000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[  877.548000] psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.
[  877.568000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[  877.572000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[  877.572000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[  877.572000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[  877.576000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[  877.576000] psmouse.c: issuing reconnect request
[  878.540000] psmouse.c: failed to re-enable mouse on isa0060/serio1
[  878.540000] psmouse.c: resync failed, issuing reconnect request
[ 1238.936000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[ 1238.936000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[ 1238.940000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[ 1238.940000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[ 1238.944000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[ 1238.944000] psmouse.c: issuing reconnect request
[ 1359.408000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[ 1359.412000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[ 1359.412000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[ 1359.412000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[ 1359.428000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4
[ 1359.428000] psmouse.c: issuing reconnect request

Julius

Re : touch pad freeze au lancement de certaines applications

Ca a quand même l'air d'être un problème matériel. Tu as une win$ installé sur ton pc ? Est ce que ca fait le même problème avec ?

Sinon tu peux regardes tu coté de Synaptics qui gère les touchpad. peut être qu'en l'installant ca règlera le soucis !?

goy

Re : touch pad freeze au lancement de certaines applications

ouai j'ai win£ aussi (j'lai garder pour certains logiciels pro...:D) mais je ne m'en sert plus, j'ai jamais eu de probleme sinon j'ai déjà ça d'installé:

Synaptics TouchPad driver for X.Org server 
This package provides an input driver for the X.Org X server to enable
advanced features of the Synaptics Touchpad including:

 * Movement with adjustable, non-linear acceleration and speed
 * Button events through short touching of the touchpad
 * Double-Button events through double short touching of the touchpad
 * Dragging through short touching and holding down the finger on the touchpad
 * Middle and right button events on the upper and lower corner of the touchpad
 * Vertical scrolling (button four and five events) through moving the finger
   on the right side of the touchpad
 * The up/down button sends button four/five events
 * Horizontal scrolling (button six and seven events) through moving the finger
   on the lower side of the touchpad
 * The multi-buttons send button four/five events, and six/seven events for
   horizontal scrolling
 * Adjustable finger detection
 * Multifinger taps: two finger for middle button and three finger for right
   button events. (Needs hardware support. Not all models implement this
   feature.)
 * Run-time configuration using shared memory. This means you can change
   parameter settings without restarting the X server (see synclient(1)).
 * It also provides a daemon to disable touchpad while typing at the keyboard
   and thus avoid unwanted mouse movements (see syndaemon(1)).

Homepage: http://web.telia.com/~u89404340/touchpad/index.html

Par exemple quand je lance wifi radar c'est mort mon touch pad est parti completement ailleurs on a l'impression qui comprend un millième de seconde après il bloc une seconde et ainsi de suite. ça me le fait aussi à des moments moins régulier sur d'autres appli, mais là je ne trouve pas de lien.

Est ce que c'est à cause de l'application, ou du wifi ?

Sinon dans synaptic y'a d'autre driver, j'vais faire un peu de recherche!

Julius

Re : touch pad freeze au lancement de certaines applications

hmm... j'ai déjà vu cette histoire avec wifi-radar. Je ne peux pas t'en dire plus mais je reste à l'écoute de ce que les autres diront !

edit : tu n'as pas un lenovo par hasard ?

Dernière modification par Julius (Le 29/05/2007, à 11:27)

goy

Re : touch pad freeze au lancement de certaines applications

edit : tu n'as pas un lenovo par hasard ?

c'est quoi ?

J'ai tester sous wind$ ça marche.... bien.

Mon pad délire un peu n'importe quand, on dirais un virus !!! c'est pourtant pas possible sous linux, n'est ce pas ?

Bon sinon j'ai d'autres problèmes matériel.

par exemple ça :
http://mail.google.com/mail/?realattid= … b1cca556c2

enfin j'irais voir ailleurs dans une autre discution ce sera mieux.

Merci à toi oh julius

Julius

Re : touch pad freeze au lancement de certaines applications

Un Lenovo c'est une marque de PC

Sinon ton exemple c'est un lien gmail... à moins que tu ne donnes ton identifiant et mot de passe ca va être difficile de voir quelque chose

goy

Re : touch pad freeze au lancement de certaines applications

oups pardon...

Moi j'ai un HP pavilion dv 5000

j'veux juste te montrer une capture d'écran comment je fais?

Ubuntero89

Re : touch pad freeze au lancement de certaines applications

http://forum.ubuntu-fr.org/viewtopic.php?pid=973874

François

---

N'est plus trop Linuxien en ce moment... Mais ce n'est qu'un au revoir ;)

Sythuzuma-Ka

Re : touch pad freeze au lancement de certaines applications

J'"ai vu le probleme par 2 fois. le premier dont j'ai oublié le modele de portable a résolu son souci en installant le pilote wifi. pour le second, un pavilion dv6000, le probleme reste : la souris finit par deconner, et ca semble tres lié au wifi, malgré le bon pilote installé...

Ceci dit, je vais tenter une reinstall de feisty 64bits, voir si ca ne viendrait pas de là... visiblement d'autres s'en sortent mieux avec cette machine...

je vous tiens au jus si possible

nememcha

Re : touch pad freeze au lancement de certaines applications

comment configurer skystar2 et voir toutes les chaines de tps sur hotbird dans le systeme ubuntu 7.10