Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 15/06/2007, à 18:57

benj3838

Beryl me fait des caprices !

ayant tester Beryl sous Feisty sans problème après avoir installer les pilote proprio et xgl je me suis dit pk de pas essayer de le mettre sur ma ubuntustudio donc aujourd'hui je commence a tester et premier problème (je conte pas en avoir d'autre) c'est tout simplement que je n'ait pas les barres de titre de fenettres (j'ai bien forcer la vertion 0.2.0beryl1) et voici le fameu message de la consol quand j'active le gestionnaire de fenettre beryl après l'avoir démarer aupréalable :

benj3838@Benj3838desktop:~$ beryl-manager
benj3838@Benj3838desktop:~$ **************************************************************
* Beryl system compatiblity check                            *
**************************************************************

Detected xserver                                : XGL

Checking Display :1.0 ...

Checking for XComposite extension               : passed (v0.3)
Checking for XDamage extension                  : passed
Checking for RandR extension                    : passed
Checking for XSync extension                    : passed

Reloading options
beryl-xgl: '/usr/lib/beryl/libinputzoom.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libinputzoom.so' has version 1.
beryl-xgl: Couldn't load plugin 'inputzoom'
beryl-xgl: '/usr/lib/beryl/libwobbly.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libwobbly.so' has version 1.
beryl-xgl: Couldn't load plugin 'wobbly'
beryl-xgl: '/usr/lib/beryl/libcube.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libcube.so' has version 2.
beryl-xgl: Couldn't load plugin 'cube'
beryl-xgl: '/usr/lib/beryl/libswitcher.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libswitcher.so' has version 0.
beryl-xgl: Couldn't load plugin 'switcher'
beryl-xgl: '/usr/lib/beryl/libthumbnail.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libthumbnail.so' has version 0.
beryl-xgl: Couldn't load plugin 'thumbnail'
beryl-xgl: '/usr/lib/beryl/libneg.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libneg.so' has version 0.
beryl-xgl: Couldn't load plugin 'neg'
beryl-xgl: '/usr/lib/beryl/libmove.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libmove.so' has version 0.
beryl-xgl: Couldn't load plugin 'move'
beryl-xgl: '/usr/lib/beryl/libobs.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libobs.so' has version 0.
beryl-xgl: Couldn't load plugin 'obs'
beryl-xgl: '/usr/lib/beryl/libanimation.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libanimation.so' has version 0.
beryl-xgl: Couldn't load plugin 'animation'
beryl-xgl: '/usr/lib/beryl/libplace.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libplace.so' has version 0.
beryl-xgl: Couldn't load plugin 'place'
beryl-xgl: '/usr/lib/beryl/libsvg.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libsvg.so' has version 3.
beryl-xgl: Couldn't load plugin 'svg'
beryl-xgl: '/usr/lib/beryl/libdbus.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libdbus.so' has version 0.
beryl-xgl: Couldn't load plugin 'dbus'
beryl-xgl: '/usr/lib/beryl/libjpeg.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libjpeg.so' has version 3.
beryl-xgl: Couldn't load plugin 'jpeg'
beryl-xgl: '/usr/lib/beryl/librotate.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/librotate.so' has version 0.
beryl-xgl: Couldn't load plugin 'rotate'
beryl-xgl: '/usr/lib/beryl/libresize.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libresize.so' has version 1.
beryl-xgl: Couldn't load plugin 'resize'
beryl-xgl: '/usr/lib/beryl/libgroup.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libgroup.so' has version 0.
beryl-xgl: Couldn't load plugin 'group'
beryl-xgl: '/usr/lib/beryl/libtext.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libtext.so' has version 1.
beryl-xgl: Couldn't load plugin 'text'
beryl-xgl: '/usr/lib/beryl/libfade.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libfade.so' has version 0.
beryl-xgl: Couldn't load plugin 'fade'
beryl-xgl: '/usr/lib/beryl/libscale.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libscale.so' has version 0.
beryl-xgl: Couldn't load plugin 'scale'
beryl-xgl: '/usr/lib/beryl/libfadedesktop.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libfadedesktop.so' has version 1.
beryl-xgl: Couldn't load plugin 'fadeDesktop'
beryl-xgl: '/usr/lib/beryl/libdecoration.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libdecoration.so' has version 0.
beryl-xgl: Couldn't load plugin 'decoration'
beryl-xgl: '/usr/lib/beryl/libpng.so' plugin version does not match beryl version.
beryl-xgl is of version 50, but plugin '/usr/lib/beryl/libpng.so' has version 2.
beryl-xgl: Couldn't load plugin 'png'

mon xorg.conf :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	Fontpath	"/usr/share/fonts/X11/misc"
	Fontpath	"/usr/share/fonts/X11/cyrillic"
	Fontpath	"/usr/share/fonts/X11/100dpi/:unscaled"
	Fontpath	"/usr/share/fonts/X11/75dpi/:unscaled"
	Fontpath	"/usr/share/fonts/X11/Type1"
	Fontpath	"/usr/share/fonts/X11/100dpi"
	Fontpath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	Fontpath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load		"i2c"
	Load		"bitmap"
	Load		"ddc"
	Load		"dri"
	Load		"extmod"
	Load		"freetype"
	Load		"int10"
	Load		"vbe"
	Load		"glx"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbOptions"	"lv3:ralt_switch"
	#Option		"XkbVariant"	"oss"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ImPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"stylus"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"eraser"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"cursor"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"Carte vidéo générique"
	Driver		"fglrx"
	Option		"VideoOverlay"	"on"
	Option		"OpenGLOverlay"	"off"
    	Option         "AddARGBGLXVisuals" "true"
    	Option         "TripleBuffer" "true"
	Busid		"PCI:1:5:0"
EndSection

Section "Monitor"
	Identifier	"Écran générique"
	Option		"DPMS"
	Horizsync	28-64
	Vertrefresh	43-60
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Carte vidéo générique"
	Monitor		"Écran générique"
	Defaultdepth	24   
	SubSection "Display"
		Depth	1
		Modes		"1400x1050"	"1280x1024"	"1152x864"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	4
		Modes		"1400x1050"	"1280x1024"	"1152x864"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	8
		Modes		"1400x1050"	"1280x1024"	"1152x864"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	15
		Modes		"1400x1050"	"1280x1024"	"1152x864"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	16
		Modes		"1400x1050"	"1280x1024"	"1152x864"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	24
		Modes		"1400x1050"	"1280x1024"	"1152x864"	"1024x768"	"800x600"	"640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Option		"AIGLX"	"false"
	Identifier	"Default Layout"
  screen "Default Screen"
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
	#	InputDevice     "stylus"	"SendCoreEvents"
	#	InputDevice     "cursor"	"SendCoreEvents"
	#	InputDevice     "eraser"	"SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

Section "Extensions"
	Option		"Composite"	"0"
EndSection

et c'est tout pour le moment.

En vous rapellant que je suis sous ubuntu studio donc Feisty et que j'ai suivis les instruction Feisty pour installer xgl les driper proprio et beryl.

Merci d'avance a tous !

BEnj3838

Hors ligne

#2 Le 16/06/2007, à 16:09

benj3838

Re : Beryl me fait des caprices !

heeee help xD
BEnj3838

Hors ligne

#3 Le 16/06/2007, à 19:29

awala

Re : Beryl me fait des caprices !

bonsoir
la première méthode pour régler ce probleme n'a pas fonctionné chez toi car tu as rajouté la bonne ligne dans ton xorg
il existe aussi une autre soluce : installe heliodor et une fois installé choisi le dans le menu beryl (rubis rouge) comme gestionnaire de fenetre par défaut

awala


Laptop Toshiba P200-1D0 sous karmic
Laptop Asus eeepc sous jaunty

Hors ligne

#4 Le 17/06/2007, à 10:22

benj3838

Re : Beryl me fait des caprices !

Ca aussi ne marche pas j'ai déjà essayer !
Merci quand même.
j'ai fait toutes les solution possibles avec le wiki sur beryl Feisty et celui sur beryl problème section : ati proprio + xgl + beryl
je n'y arrive toujours pas.
BEnj3838

Hors ligne