Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 22/10/2013, à 16:14

Leonce

[résolu] PB installation UbuntuStudio à côté de Ubuntu13.10

Bonjour à tous,

j'ai installé ubuntu 13.10 x64 sur un ordinateur portable Asus X55A intel pentium CPU B980 @ 2.40 GHz x2 via un cd.
impeccable, ça fonctionne, et j'ai l'habitude d'utiliser ubuntu depuis deux ans environ.

J'essaye cependant d'installer en dual-boot Ubuntu Studio 13.10 x64.

Et, là, problème :

Échec de l’installation de GRUB.
Le paquet grub-efi-amd64-signed n'a pas pu être installé dans /target/. En l'absence du programme de démarrage GRUB, le système ne pourra démarrer.

Donc après redémarrage, effectivement, l'ordinateur s'allume directement sur ubuntu 13.10.

Plusieurs réinstallations d'ubuntu Studio, réinstallation totale d'ubuntu.... Toujours pareil. Pas assez fortiche pour m'en sortir tout seul, j'ai besoin d'aide.

Voici mon rapport Boot-info : http://paste.ubuntu.com/6283103

Que dois-je faire maintenant ? Merci pour toute aide smile

Dernière modification par Leonce (Le 22/10/2013, à 21:43)

Ubuntu 22.04.1
Mes cartes géographiques en ligne

Hors ligne

#2 Le 22/10/2013, à 20:56

Leonce

Re : [résolu] PB installation UbuntuStudio à côté de Ubuntu13.10

Ma question n'est peut-être pas assez précise :
Ubuntu 13.10 fonctionne mais je souhaiterai cependant choisir, lors du démarrage de l'ordinateur, d'aller sur Ubuntu 13.10 ou Ubuntu studio 13.10 selon l'utilisation que je désire.

Comment faire ?

Merci.

Ubuntu 22.04.1
Mes cartes géographiques en ligne

Hors ligne

#3 Le 22/10/2013, à 21:25

PPdM

Re : [résolu] PB installation UbuntuStudio à côté de Ubuntu13.10

Salut
Tu as du rater une étape, essaye de suivre ceci
Cela te remettra le GRUB en ordre

La critique est facile, mais l'art est difficile !
L'humanité étant ce qu'elle est, la liberté ne sera jamais un acquit, mais toujours un droit à défendre !
Pour résoudre un problème commence par poser les bonnes questions, la bonne solution en découlera

Hors ligne

#4 Le 22/10/2013, à 21:43

Leonce

Re : [résolu] PB installation UbuntuStudio à côté de Ubuntu13.10

J'ai fait la réparation, ça fonctionne.

Toute ma gratitude, PPdM cool

Ubuntu 22.04.1
Mes cartes géographiques en ligne

Hors ligne

#5 Le 22/10/2013, à 21:48

PPdM

Re : [résolu] PB installation UbuntuStudio à côté de Ubuntu13.10

A ton service ! wink

La critique est facile, mais l'art est difficile !
L'humanité étant ce qu'elle est, la liberté ne sera jamais un acquit, mais toujours un droit à défendre !
Pour résoudre un problème commence par poser les bonnes questions, la bonne solution en découlera

Hors ligne

#6 Le 23/10/2013, à 06:37

malbo

Re : [résolu] PB installation UbuntuStudio à côté de Ubuntu13.10

Leonce,
Ton Boot-Info est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 27Sep2013]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  According to the info in the boot sector, sda1 starts 
                       at sector 0. But according to the info from fdisk, 
                       sda1 starts at sector 2048.
    Operating System:  
    Boot files:        /EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 13.10 
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda4: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 13.10 
    Boot files:        /etc/fstab

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1   976,773,167   976,773,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048       999,423       997,376 EFI System partition
/dev/sda2         999,424   492,655,300   491,655,877 Data partition (Linux)
/dev/sda3     968,620,032   976,771,071     8,151,040 Swap partition (Linux)
/dev/sda4     492,656,640   968,620,031   475,963,392 Data partition (Linux)

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        F7CD-923F                              vfat       
/dev/sda2        5550c0f3-722d-45e8-98a3-9833bd689f28   ext4       
/dev/sda3        010297eb-1310-4877-b361-8e2bf8946ad2   swap       
/dev/sda4        179c5022-e15a-47da-9228-16b25771f0c6   ext4       

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /boot/efi                vfat       (rw)
/dev/sda2        /                        ext4       (rw,errors=remount-ro)


=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  5550c0f3-722d-45e8-98a3-9833bd689f28
else
  search --no-floppy --fs-uuid --set=root 5550c0f3-722d-45e8-98a3-9833bd689f28
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-5550c0f3-722d-45e8-98a3-9833bd689f28' {
recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  5550c0f3-722d-45e8-98a3-9833bd689f28
	else
	  search --no-floppy --fs-uuid --set=root 5550c0f3-722d-45e8-98a3-9833bd689f28
	fi
	linux	/boot/vmlinuz-3.11.0-12-generic.efi.signed root=UUID=5550c0f3-722d-45e8-98a3-9833bd689f28 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.11.0-12-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-5550c0f3-722d-45e8-98a3-9833bd689f28' {
	menuentry 'Ubuntu, with Linux 3.11.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-advanced-5550c0f3-722d-45e8-98a3-9833bd689f28' {
	recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  5550c0f3-722d-45e8-98a3-9833bd689f28
		else
		  search --no-floppy --fs-uuid --set=root 5550c0f3-722d-45e8-98a3-9833bd689f28
		fi
		echo	'Loading Linux 3.11.0-12-generic ...'
		linux	/boot/vmlinuz-3.11.0-12-generic.efi.signed root=UUID=5550c0f3-722d-45e8-98a3-9833bd689f28 ro   quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.11.0-12-generic
	}
	menuentry 'Ubuntu, with Linux 3.11.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-recovery-5550c0f3-722d-45e8-98a3-9833bd689f28' {
	recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  5550c0f3-722d-45e8-98a3-9833bd689f28
		else
		  search --no-floppy --fs-uuid --set=root 5550c0f3-722d-45e8-98a3-9833bd689f28
		fi
		echo	'Loading Linux 3.11.0-12-generic ...'
		linux	/boot/vmlinuz-3.11.0-12-generic.efi.signed root=UUID=5550c0f3-722d-45e8-98a3-9833bd689f28 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.11.0-12-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
  if keystatus; then
    if keystatus --shift; then
      set timeout=-1
    else
      set timeout=0
    fi
  else
    if sleep --interruptible 3 ; then
      set timeout=0
    fi
  fi
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=5550c0f3-722d-45e8-98a3-9833bd689f28 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=F7CD-923F  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda3 during installation
UUID=010297eb-1310-4877-b361-8e2bf8946ad2 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)


=============================== sda4/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda4 during installation
UUID=179c5022-e15a-47da-9228-16b25771f0c6 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=F7CD-923F  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda3 during installation
UUID=010297eb-1310-4877-b361-8e2bf8946ad2 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda4: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)


=============================== StdErr Messages: ===============================

cat: /tmp/BootInfo-IZtBFMc1/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-IZtBFMc1/Tmp_Log: No such file or directory

ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-10-22__16h02 ===================
boot-repair version : 3.199~ppa31~saucy
boot-sav version : 3.199~ppa31~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa31~saucy
boot-repair is executed in installed-session (Ubuntu 13.10, saucy, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic.efi.signed root=UUID=5550c0f3-722d-45e8-98a3-9833bd689f28 ro quiet splash vt.handoff=7

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 13.10 CurrentSession:linux
/dev/sda4:Ubuntu 13.10 (13.10):Ubuntu:linux

=================== blkid:
/dev/sda1: UUID="F7CD-923F" TYPE="vfat"
/dev/sda2: UUID="5550c0f3-722d-45e8-98a3-9833bd689f28" TYPE="ext4"
/dev/sda3: UUID="010297eb-1310-4877-b361-8e2bf8946ad2" TYPE="swap"
/dev/sda4: UUID="179c5022-e15a-47da-9228-16b25771f0c6" TYPE="ext4"


1 disks with OS, 2 OS : 2 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 oct.  16 21:02 grub.d
total 72
-rwxr-xr-x 1 root root  7850 oct.  10 19:48 00_header
-rwxr-xr-x 1 root root  5949 août  15 10:26 05_debian_theme
-rwxr-xr-x 1 root root 11479 oct.  10 19:48 10_linux
-rwxr-xr-x 1 root root 10258 oct.  10 19:48 20_linux_xen
-rwxr-xr-x 1 root root  1798 juin  17 11:52 20_memtest86+
-rwxr-xr-x 1 root root 11531 oct.  10 19:48 30_os-prober
-rwxr-xr-x 1 root root  1426 oct.  10 19:48 30_uefi-firmware
-rwxr-xr-x 1 root root   214 oct.  10 19:48 40_custom
-rwxr-xr-x 1 root root   216 oct.  10 19:48 41_custom
-rw-r--r-- 1 root root   483 oct.  10 19:48 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda2: UUID=F7CD-923F   (sda1)
No sda4/etc/default/grub

=================== sda4/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 oct.  17 00:11 grub.d
total 84
-rwxr-xr-x 1 root root  7850 oct.  10 19:48 00_header
-rwxr-xr-x 1 root root  5949 août  15 10:26 05_debian_theme
-rwxr-xr-x 1 root root  9921 sept. 23 12:39 09_lowlatency
-rwxr-xr-x 1 root root 11479 oct.  10 19:48 10_linux
-rwxr-xr-x 1 root root 10258 oct.  10 19:48 20_linux_xen
-rwxr-xr-x 1 root root  1798 juin  17 11:52 20_memtest86+
-rwxr-xr-x 1 root root 11531 oct.  10 19:48 30_os-prober
-rwxr-xr-x 1 root root  1426 oct.  10 19:48 30_uefi-firmware
-rwxr-xr-x 1 root root   214 oct.  10 19:48 40_custom
-rwxr-xr-x 1 root root   216 oct.  10 19:48 41_custom
-rw-r--r-- 1 root root   483 oct.  10 19:48 README


/boot/efi detected in the fstab of sda4: UUID=F7CD-923F   (sda1)

efibootmgr -v
BootCurrent: 0000
Timeout: 2 seconds
BootOrder: 0000,0004,0001,0002
Boot0000* ubuntu	HD(1,800,f3800,2233e1c4-43dc-43ed-bf25-e34ffbb3ca9d)File(EFIubuntushimx64.efi)
Boot0001* CD/DVD Drive 	BIOS(3,0,00)AMGOAMNO........o.H.L.-.D.T.-.S.T. .D.V.D.R.A.M. .G.T.7.0.N....................A...........................>..Gd-.;.A..MQ..L.Z.K.C.N.V.7.1.G.4.5. .9. . . . . . . . ......AMBO
Boot0002* Network Card 	BIOS(6,0,00)AMGOAMNO........i.A.t.h.e.r.o.s. .B.o.o.t. .A.g.e.n.t.........................rN.D+..,............:..Gd-.;.A..MQ..L.A.t.h.e.r.o.s. .B.o.o.t. .A.g.e.n.t......AMBO
Boot0004* ubuntu	HD(1,800,f3800,2233e1c4-43dc-43ed-bf25-e34ffbb3ca9d)File(EFIUbuntugrubx64.efi)
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	.
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/boot/efi.
sda4	: sda,	not-sepboot,	no-grubenv	grub1,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda4.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA TOSHIBA MQ01ABD0 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End    Size    File system     Name  Flags
1      1049kB  512MB  511MB   fat32                 boot
2      512MB   252GB  252GB   ext4
4      252GB   496GB  244GB   ext4
3      496GB   500GB  4173MB  linux-swap(v1)

=================== parted -lm:

BYT;
/dev/sda:500GB:scsi:512:4096:gpt:ATA TOSHIBA MQ01ABD0;
1:1049kB:512MB:511MB:fat32::boot;
2:512MB:252GB:252GB:ext4::;
4:252GB:496GB:244GB:ext4::;
3:496GB:500GB:4173MB:linux-swap(v1)::;


=================== mount:
/dev/sda2 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda1 on /boot/efi type vfat (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=Leonce,)
/dev/sda4 on /mnt/boot-sav/sda4 type ext4 (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fd full fuse hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper:  control
ls /boot/efi/1:

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 64 6f 73  66 73 00 00 02 08 20 00  |.X.mkdosfs.... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 00 00 00  |........?.......|
00000020  00 38 0f 00 d0 03 00 00  00 00 00 00 02 00 00 00  |.8..............|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  00 01 29 3f 92 cd f7 4e  4f 20 4e 41 4d 45 20 20  |..)?...NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/sda2      ext4      231G  3.8G  216G   2% /
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
udev           devtmpfs  1.9G   12K  1.9G   1% /dev
tmpfs          tmpfs     384M  1.1M  383M   1% /run
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     1.9G  148K  1.9G   1% /run/shm
none           tmpfs     100M   48K  100M   1% /run/user
/dev/sda1      vfat      487M  2.2M  484M   1% /boot/efi
/dev/sda4      ext4      224G  5.2G  207G   3% /mnt/boot-sav/sda4

=================== fdisk -l:

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1   976773167   488386583+  ee  GPT
Partition 1 does not start on physical sector boundary.


EFI détecté. Veuillez vérifier les options.
=================== Final advice in case of recommended repair


Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 13.10] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)

=================== Default settings
Recommended-Repair
This setting would purge (in order to unsign-grub) and reinstall the grub-efi of sda2, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    backup-and-rename-efi-files fake-ms-efi

=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.



Aucun changement n'a été effectué sur cet ordinateur.

On y voit ceci :

=================== PARTITIONS & DISKS:
sda2    : sda,    not-sepboot,    grubenv-ok    grub2,    signed grub-efi ,    update-grub,    64,    with-boot,    is-os,    not--efi--part,    fstab-without-boot,    fstab-has-goodEFI,    no-nt,    no-winload,    no-recov-nor-hid,    no-bmgr,    notwinboot,    apt-get,    grub-install,    with--usr,    fstab-without-usr,    not-sep-usr,    standard,    farbios,    .
sda1    : sda,    not-sepboot,    no-grubenv    nogrub,    no-docgrub,    no-update-grub,    32,    no-boot,    no-os,    is-correct-EFI,    part-has-no-fstab,    part-has-no-fstab,    no-nt,    no-winload,    no-recov-nor-hid,    no-bmgr,    notwinboot,    nopakmgr,    nogrubinstall,    no---usr,    part-has-no-fstab,    not-sep-usr,    standard,    not-far,    /boot/efi.
sda4    : sda,    not-sepboot,    no-grubenv    grub1,    grub-pc ,    update-grub,    64,    with-boot,    is-os,    not--efi--part,    fstab-without-boot,    fstab-has-goodEFI,    no-nt,    no-winload,    no-recov-nor-hid,    no-bmgr,    notwinboot,    apt-get,    grub-install,    with--usr,    fstab-without-usr,    not-sep-usr,    standard,    farbios,    /mnt/boot-sav/sda4.

qui montre que le "Grub" de ton installation sur sda2 est "signed grub-efi", c'est à dire la version signée de grub pour le mode (U)EFI alors que ton installation sur sda4 (Ubuntu Studio 13.10) est grub1 avec grub-pc, c'est à dire une version de Grub prévue pour le mode non-EFI

Je suis curieux de voir le résultat que tu as obtenu après réparation : pourrais-tu poster le Boot-Info que tu obtiens à présent ?

Dernière modification par malbo (Le 23/10/2013, à 07:49)

Hors ligne

#7 Le 23/10/2013, à 11:09

Leonce

Re : [résolu] PB installation UbuntuStudio à côté de Ubuntu13.10

Bonjour malbo,

et merci de suivre ce post.

en réponse à ta question, voici mon nouveau rapport Boot-info : http://paste.ubuntu.com/6287902

1/ si quelque chose semble être bancal, n'hésite pas à me le dire, quitte à refaire l'installation, je préférerai avoir mes systèmes stables ;
2/ autre élément, qui me permettra de me coucher moins bête :
- qu'est-ce qui a pu se passer ?
- comment, en réinstallant tout, faire pour l'installation se passe bien, en EFI ? Car j'ai essayé auparavant plusieurs fois de tout réinstaller, et à chaque fois je me retrouvais dans cette situation. Faut-il tout formater le disque en amont ?

Merci !

Dernière modification par Leonce (Le 23/10/2013, à 11:19)

Ubuntu 22.04.1
Mes cartes géographiques en ligne

Hors ligne

#8 Le 23/10/2013, à 11:47

malbo

Re : [résolu] PB installation UbuntuStudio à côté de Ubuntu13.10

Ton Boot-Info est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 27Sep2013]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  According to the info in the boot sector, sda1 starts 
                       at sector 0. But according to the info from fdisk, 
                       sda1 starts at sector 2048.
    Operating System:  
    Boot files:        /EFI/Boot/bootx64.efi /EFI/ubuntu/grubx64.efi 
                       /EFI/ubuntu/shimx64.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 13.10 
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda4: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 13.10 
    Boot files:        /boot/grub/grub.cfg /etc/fstab

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1   976,773,167   976,773,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048       999,423       997,376 EFI System partition
/dev/sda2         999,424   492,655,300   491,655,877 Data partition (Linux)
/dev/sda3     968,620,032   976,771,071     8,151,040 Swap partition (Linux)
/dev/sda4     492,656,640   968,620,031   475,963,392 Data partition (Linux)

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        F7CD-923F                              vfat       
/dev/sda2        5550c0f3-722d-45e8-98a3-9833bd689f28   ext4       
/dev/sda3        010297eb-1310-4877-b361-8e2bf8946ad2   swap       
/dev/sda4        179c5022-e15a-47da-9228-16b25771f0c6   ext4       

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /boot/efi                vfat       (rw)
/dev/sda2        /                        ext4       (rw,errors=remount-ro)


=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  5550c0f3-722d-45e8-98a3-9833bd689f28
else
  search --no-floppy --fs-uuid --set=root 5550c0f3-722d-45e8-98a3-9833bd689f28
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=10
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-5550c0f3-722d-45e8-98a3-9833bd689f28' {
recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  5550c0f3-722d-45e8-98a3-9833bd689f28
	else
	  search --no-floppy --fs-uuid --set=root 5550c0f3-722d-45e8-98a3-9833bd689f28
	fi
	linux	/boot/vmlinuz-3.11.0-12-generic root=UUID=5550c0f3-722d-45e8-98a3-9833bd689f28 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.11.0-12-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-5550c0f3-722d-45e8-98a3-9833bd689f28' {
	menuentry 'Ubuntu, with Linux 3.11.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-advanced-5550c0f3-722d-45e8-98a3-9833bd689f28' {
	recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  5550c0f3-722d-45e8-98a3-9833bd689f28
		else
		  search --no-floppy --fs-uuid --set=root 5550c0f3-722d-45e8-98a3-9833bd689f28
		fi
		echo	'Loading Linux 3.11.0-12-generic ...'
		linux	/boot/vmlinuz-3.11.0-12-generic root=UUID=5550c0f3-722d-45e8-98a3-9833bd689f28 ro   quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.11.0-12-generic
	}
	menuentry 'Ubuntu, with Linux 3.11.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-recovery-5550c0f3-722d-45e8-98a3-9833bd689f28' {
	recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  5550c0f3-722d-45e8-98a3-9833bd689f28
		else
		  search --no-floppy --fs-uuid --set=root 5550c0f3-722d-45e8-98a3-9833bd689f28
		fi
		echo	'Loading Linux 3.11.0-12-generic ...'
		linux	/boot/vmlinuz-3.11.0-12-generic root=UUID=5550c0f3-722d-45e8-98a3-9833bd689f28 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.11.0-12-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu 13.10 (13.10)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-179c5022-e15a-47da-9228-16b25771f0c6' {
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt4'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4  179c5022-e15a-47da-9228-16b25771f0c6
	else
	  search --no-floppy --fs-uuid --set=root 179c5022-e15a-47da-9228-16b25771f0c6
	fi
	linux /vmlinuz root=/dev/sda4
	initrd /initrd.img
}
submenu 'Advanced options for Ubuntu 13.10 (13.10)' $menuentry_id_option 'osprober-gnulinux-advanced-179c5022-e15a-47da-9228-16b25771f0c6' {
	menuentry 'Ubuntu 13.10 (13.10) (on /dev/sda4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--179c5022-e15a-47da-9228-16b25771f0c6' {
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4  179c5022-e15a-47da-9228-16b25771f0c6
		else
		  search --no-floppy --fs-uuid --set=root 179c5022-e15a-47da-9228-16b25771f0c6
		fi
		linux /vmlinuz root=/dev/sda4
		initrd /initrd.img
	}
	menuentry 'Ubuntu 13.10 (13.10) (on /dev/sda4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--179c5022-e15a-47da-9228-16b25771f0c6' {
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4  179c5022-e15a-47da-9228-16b25771f0c6
		else
		  search --no-floppy --fs-uuid --set=root 179c5022-e15a-47da-9228-16b25771f0c6
		fi
		linux /vmlinuz root=/dev/sda4
		initrd /initrd.img
	}
	menuentry 'Ubuntu 13.10 (13.10) (on /dev/sda4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.11.0-11-lowlatency--179c5022-e15a-47da-9228-16b25771f0c6' {
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4  179c5022-e15a-47da-9228-16b25771f0c6
		else
		  search --no-floppy --fs-uuid --set=root 179c5022-e15a-47da-9228-16b25771f0c6
		fi
		linux /boot/vmlinuz-3.11.0-11-lowlatency root=/dev/sda4
		initrd /boot/initrd.img-3.11.0-11-lowlatency
	}
	menuentry 'Ubuntu 13.10 (13.10) (on /dev/sda4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--179c5022-e15a-47da-9228-16b25771f0c6' {
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4  179c5022-e15a-47da-9228-16b25771f0c6
		else
		  search --no-floppy --fs-uuid --set=root 179c5022-e15a-47da-9228-16b25771f0c6
		fi
		linux /vmlinuz root=/dev/sda4
		initrd /initrd.img
	}
	menuentry 'Ubuntu 13.10 (13.10) (on /dev/sda4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--179c5022-e15a-47da-9228-16b25771f0c6' {
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4  179c5022-e15a-47da-9228-16b25771f0c6
		else
		  search --no-floppy --fs-uuid --set=root 179c5022-e15a-47da-9228-16b25771f0c6
		fi
		linux /vmlinuz root=/dev/sda4
		initrd /initrd.img
	}
}

### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=5550c0f3-722d-45e8-98a3-9833bd689f28 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
#UUID=F7CD-923F  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda3 during installation
UUID=010297eb-1310-4877-b361-8e2bf8946ad2 none            swap    sw              0       0
UUID=F7CD-923F	/boot/efi	vfat	defaults	0	1
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)


=========================== sda4/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4  179c5022-e15a-47da-9228-16b25771f0c6
else
  search --no-floppy --fs-uuid --set=root 179c5022-e15a-47da-9228-16b25771f0c6
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=5
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/09_lowlatency ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'GNU/Linux (lowlatency)' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-179c5022-e15a-47da-9228-16b25771f0c6' {
recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt4'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4  179c5022-e15a-47da-9228-16b25771f0c6
	else
	  search --no-floppy --fs-uuid --set=root 179c5022-e15a-47da-9228-16b25771f0c6
	fi
	linux	/boot/vmlinuz-3.11.0-11-lowlatency root=UUID=179c5022-e15a-47da-9228-16b25771f0c6 ro   
	initrd	/boot/initrd.img-3.11.0-11-lowlatency
}

### END /etc/grub.d/09_lowlatency ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'GNU/Linux' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-179c5022-e15a-47da-9228-16b25771f0c6' {
recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt4'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4  179c5022-e15a-47da-9228-16b25771f0c6
	else
	  search --no-floppy --fs-uuid --set=root 179c5022-e15a-47da-9228-16b25771f0c6
	fi
	linux	/boot/vmlinuz-3.11.0-11-lowlatency root=UUID=179c5022-e15a-47da-9228-16b25771f0c6 ro   
	initrd	/boot/initrd.img-3.11.0-11-lowlatency
}
submenu 'Options avancées pour GNU/Linux' $menuentry_id_option 'gnulinux-advanced-179c5022-e15a-47da-9228-16b25771f0c6' {
	menuentry 'GNU/Linux, avec Linux 3.11.0-11-lowlatency' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-11-lowlatency-advanced-179c5022-e15a-47da-9228-16b25771f0c6' {
	recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4  179c5022-e15a-47da-9228-16b25771f0c6
		else
		  search --no-floppy --fs-uuid --set=root 179c5022-e15a-47da-9228-16b25771f0c6
		fi
		echo	'Chargement de Linux 3.11.0-11-lowlatency…'
		linux	/boot/vmlinuz-3.11.0-11-lowlatency root=UUID=179c5022-e15a-47da-9228-16b25771f0c6 ro   
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.11.0-11-lowlatency
	}
	menuentry 'GNU/Linux, avec Linux 3.11.0-11-lowlatency (mode de dépannage)' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-11-lowlatency-recovery-179c5022-e15a-47da-9228-16b25771f0c6' {
	recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4  179c5022-e15a-47da-9228-16b25771f0c6
		else
		  search --no-floppy --fs-uuid --set=root 179c5022-e15a-47da-9228-16b25771f0c6
		fi
		echo	'Chargement de Linux 3.11.0-11-lowlatency…'
		linux	/boot/vmlinuz-3.11.0-11-lowlatency root=UUID=179c5022-e15a-47da-9228-16b25771f0c6 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.11.0-11-lowlatency
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu 13.10 (13.10)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-5550c0f3-722d-45e8-98a3-9833bd689f28' {
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  5550c0f3-722d-45e8-98a3-9833bd689f28
	else
	  search --no-floppy --fs-uuid --set=root 5550c0f3-722d-45e8-98a3-9833bd689f28
	fi
	linux /boot/vmlinuz-3.11.0-12-generic root=UUID=5550c0f3-722d-45e8-98a3-9833bd689f28 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.11.0-12-generic
}
submenu 'Options avancées pour Ubuntu 13.10 (13.10)' $menuentry_id_option 'osprober-gnulinux-advanced-5550c0f3-722d-45e8-98a3-9833bd689f28' {
	menuentry 'Ubuntu (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.11.0-12-generic--5550c0f3-722d-45e8-98a3-9833bd689f28' {
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  5550c0f3-722d-45e8-98a3-9833bd689f28
		else
		  search --no-floppy --fs-uuid --set=root 5550c0f3-722d-45e8-98a3-9833bd689f28
		fi
		linux /boot/vmlinuz-3.11.0-12-generic root=UUID=5550c0f3-722d-45e8-98a3-9833bd689f28 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.11.0-12-generic
	}
	menuentry 'Ubuntu, with Linux 3.11.0-12-generic (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.11.0-12-generic--5550c0f3-722d-45e8-98a3-9833bd689f28' {
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  5550c0f3-722d-45e8-98a3-9833bd689f28
		else
		  search --no-floppy --fs-uuid --set=root 5550c0f3-722d-45e8-98a3-9833bd689f28
		fi
		linux /boot/vmlinuz-3.11.0-12-generic root=UUID=5550c0f3-722d-45e8-98a3-9833bd689f28 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.11.0-12-generic
	}
	menuentry 'Ubuntu, with Linux 3.11.0-12-generic (recovery mode) (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.11.0-12-generic-root=UUID=5550c0f3-722d-45e8-98a3-9833bd689f28 ro recovery nomodeset-5550c0f3-722d-45e8-98a3-9833bd689f28' {
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  5550c0f3-722d-45e8-98a3-9833bd689f28
		else
		  search --no-floppy --fs-uuid --set=root 5550c0f3-722d-45e8-98a3-9833bd689f28
		fi
		linux /boot/vmlinuz-3.11.0-12-generic root=UUID=5550c0f3-722d-45e8-98a3-9833bd689f28 ro recovery nomodeset
		initrd /boot/initrd.img-3.11.0-12-generic
	}
	menuentry 'Ubuntu 13.10 (13.10) (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5550c0f3-722d-45e8-98a3-9833bd689f28' {
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  5550c0f3-722d-45e8-98a3-9833bd689f28
		else
		  search --no-floppy --fs-uuid --set=root 5550c0f3-722d-45e8-98a3-9833bd689f28
		fi
		linux /vmlinuz root=/dev/sda4
		initrd /initrd.img
	}
}

### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda4/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda4 during installation
UUID=179c5022-e15a-47da-9228-16b25771f0c6 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=F7CD-923F  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda3 during installation
UUID=010297eb-1310-4877-b361-8e2bf8946ad2 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda4: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)


=============================== StdErr Messages: ===============================

cat: /tmp/BootInfo-9UNnn9r6/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-9UNnn9r6/Tmp_Log: No such file or directory

ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-10-23__11h11 ===================
boot-repair version : 3.199~ppa31~saucy
boot-sav version : 3.199~ppa31~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa31~saucy
boot-repair is executed in installed-session (Ubuntu 13.10, saucy, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=5550c0f3-722d-45e8-98a3-9833bd689f28 ro quiet splash vt.handoff=7

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 13.10 CurrentSession:linux
/dev/sda4:Ubuntu 13.10 (13.10):Ubuntu:linux

=================== blkid:
/dev/sda1: UUID="F7CD-923F" TYPE="vfat"
/dev/sda2: UUID="5550c0f3-722d-45e8-98a3-9833bd689f28" TYPE="ext4"
/dev/sda3: UUID="010297eb-1310-4877-b361-8e2bf8946ad2" TYPE="swap"
/dev/sda4: UUID="179c5022-e15a-47da-9228-16b25771f0c6" TYPE="ext4"


1 disks with OS, 2 OS : 2 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 oct.  22 21:31 grub.d
drwxr-xr-x  2 root root    4096 oct.  22 21:29 grub.d.bak
total 68
-rwxr-xr-x 1 root root  7850 oct.  10 19:48 00_header
-rwxr-xr-x 1 root root  5949 août  15 10:26 05_debian_theme
-rwxr-xr-x 1 root root 11479 oct.  10 19:48 10_linux
-rwxr-xr-x 1 root root 10258 oct.  10 19:48 20_linux_xen
-rwxr-xr-x 1 root root 11531 oct.  10 19:48 30_os-prober
-rwxr-xr-x 1 root root  1426 oct.  10 19:48 30_uefi-firmware
-rwxr-xr-x 1 root root   214 oct.  10 19:48 40_custom
-rwxr-xr-x 1 root root   216 oct.  10 19:48 41_custom
-rw-r--r-- 1 root root   483 oct.  10 19:48 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda2: UUID=F7CD-923F	 (sda1)
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bootx64.efi
No sda4/etc/default/grub

=================== sda4/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 oct.  17 00:11 grub.d
total 84
-rwxr-xr-x 1 root root  7850 oct.  10 19:48 00_header
-rwxr-xr-x 1 root root  5949 août  15 10:26 05_debian_theme
-rwxr-xr-x 1 root root  9921 sept. 23 12:39 09_lowlatency
-rwxr-xr-x 1 root root 11479 oct.  10 19:48 10_linux
-rwxr-xr-x 1 root root 10258 oct.  10 19:48 20_linux_xen
-rwxr-xr-x 1 root root  1798 juin  17 11:52 20_memtest86+
-rwxr-xr-x 1 root root 11531 oct.  10 19:48 30_os-prober
-rwxr-xr-x 1 root root  1426 oct.  10 19:48 30_uefi-firmware
-rwxr-xr-x 1 root root   214 oct.  10 19:48 40_custom
-rwxr-xr-x 1 root root   216 oct.  10 19:48 41_custom
-rw-r--r-- 1 root root   483 oct.  10 19:48 README


/boot/efi detected in the fstab of sda4: UUID=F7CD-923F   (sda1)

efibootmgr -v
BootCurrent: 0000
Timeout: 2 seconds
BootOrder: 0000,0003,0004,0001,0002
Boot0000* ubuntu	HD(1,800,f3800,2233e1c4-43dc-43ed-bf25-e34ffbb3ca9d)File(EFIubuntugrubx64.efi)
Boot0001* CD/DVD Drive 	BIOS(3,0,00)AMGOAMNO........o.H.L.-.D.T.-.S.T. .D.V.D.R.A.M. .G.T.7.0.N....................A...........................>..Gd-.;.A..MQ..L.Z.K.C.N.V.7.1.G.4.5. .9. . . . . . . . ......AMBO
Boot0002* Network Card 	BIOS(6,0,00)AMGOAMNO........i.A.t.h.e.r.o.s. .B.o.o.t. .A.g.e.n.t.........................rN.D+..,............:..Gd-.;.A..MQ..L.A.t.h.e.r.o.s. .B.o.o.t. .A.g.e.n.t......AMBO
Boot0003* Windows Boot Manager	HD(1,800,f3800,2233e1c4-43dc-43ed-bf25-e34ffbb3ca9d)File(EFIMicrosoftBootbootmgfw.efi)
Boot0004* ubuntu	HD(1,800,f3800,2233e1c4-43dc-43ed-bf25-e34ffbb3ca9d)File(EFIUbuntugrubx64.efi)
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	.
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/boot/efi.
sda4	: sda,	not-sepboot,	grubenv-ok	grub1,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda4.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA TOSHIBA MQ01ABD0 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End    Size    File system     Name  Flags
1      1049kB  512MB  511MB   fat32                 boot
2      512MB   252GB  252GB   ext4
4      252GB   496GB  244GB   ext4
3      496GB   500GB  4173MB  linux-swap(v1)

=================== parted -lm:

BYT;
/dev/sda:500GB:scsi:512:4096:gpt:ATA TOSHIBA MQ01ABD0;
1:1049kB:512MB:511MB:fat32::boot;
2:512MB:252GB:252GB:ext4::;
4:252GB:496GB:244GB:ext4::;
3:496GB:500GB:4173MB:linux-swap(v1)::;


=================== mount:
/dev/sda2 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda1 on /boot/efi type vfat (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=arnaud)
/dev/sda4 on /mnt/boot-sav/sda4 type ext4 (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fd full fuse hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper:  control
ls /boot/efi/1:

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 64 6f 73  66 73 00 00 02 08 20 00  |.X.mkdosfs.... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 00 00 00  |........?.......|
00000020  00 38 0f 00 d0 03 00 00  00 00 00 00 02 00 00 00  |.8..............|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  00 01 29 3f 92 cd f7 4e  4f 20 4e 41 4d 45 20 20  |..)?...NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/sda2      ext4      231G  3.7G  216G   2% /
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
udev           devtmpfs  1.9G   12K  1.9G   1% /dev
tmpfs          tmpfs     384M  1.1M  383M   1% /run
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     1.9G   76K  1.9G   1% /run/shm
none           tmpfs     100M   28K  100M   1% /run/user
/dev/sda1      vfat      487M  1.9M  485M   1% /boot/efi
/dev/sda4      ext4      224G  6.9G  206G   4% /mnt/boot-sav/sda4

=================== fdisk -l:

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1   976773167   488386583+  ee  GPT
Partition 1 does not start on physical sector boundary.


EFI détecté. Veuillez vérifier les options.
=================== Final advice in case of recommended repair


Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 13.10] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)

=================== Default settings
Recommended-Repair
This setting would reinstall the grub-efi of sda2, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    backup-and-rename-efi-files fake-ms-efi

=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.



Aucun changement n'a été effectué sur cet ordinateur.

J'ai un peu de mal à croire ce que je vois là (ça existait déjà dans le Boot-Info précédent mais je n'y avais pas prêté attention) :

=============================== sda4/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda4 during installation
UUID=179c5022-e15a-47da-9228-16b25771f0c6 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=F7CD-923F  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda3 during installation
UUID=010297eb-1310-4877-b361-8e2bf8946ad2 none            swap    sw              0       0

En effet, la partie relative à /boot/efi laisse penser que l'installation a bien été réalisée en mode EFI. Cependant on continue à voir ce que j'ai noté dans le post #6 pour sda4 :

sda4	: sda,	not-sepboot,	grubenv-ok	grub1,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda4.

ce qui signifierait que ce n'est pas une installation EFI. C'est contradictoire et je ne sais pas trop quoi penser...

Au lieu de faire un Boot-Info depuis une session de ton Ubuntu qui se trouve sur sda2, pourrais-tu démarrer sur l'autre Ubuntu, celui de sda4, et faire un Boot-Info depuis cette session ? Le but est de voir si le Boot-Info va détecter une session EFI ou non-EFI

Dernière modification par malbo (Le 23/10/2013, à 11:52)

Hors ligne

#9 Le 23/10/2013, à 11:59

Leonce

Re : [résolu] PB installation UbuntuStudio à côté de Ubuntu13.10

malbo,

voici ta requête : http://paste.ubuntu.com/6288102

merci

Ubuntu 22.04.1
Mes cartes géographiques en ligne

Hors ligne

#10 Le 23/10/2013, à 12:16

malbo

Re : [résolu] PB installation UbuntuStudio à côté de Ubuntu13.10

Le Boot-Info que tu as obtenu continue à m’intriguer. Je te prie de prendre connaissance des posts #26 et #27 dans ce fil : http://forum.ubuntu-fr.org/viewtopic.ph … #p10089041
Tu y verras une méthode d'identification pour savoir si une session est bien démarrée en EFI ou pas. Les exemples pratiques sont dans le post #27 et sont assez explicites je pense. Pourrais-tu faire cette manip sur ta session Ubuntu de sda2 en premier (pour te chauffer parce que sur sda2 le résultat ne laisse pas de doute : je suis convaincu que tu es dans une session EFI) et refaire cette manip sur une session de ton Ubuntu de sda4.

Dernière modification par malbo (Le 23/10/2013, à 12:17)

Hors ligne

#11 Le 23/10/2013, à 13:34

Leonce

Re : [résolu] PB installation UbuntuStudio à côté de Ubuntu13.10

A la réponse des posts  #26 et #27 dans ce fil : http://forum.ubuntu-fr.org/viewtopic.ph … #p10089041
j'ai dans les deux cas 

Session EFI

Quant à la commande 

dmesg | grep EFI

elle me renvoie :

- pour Ubuntu 13.10

[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.609707] fb0: EFI VGA frame buffer device
[    0.684318] EFI Variables Facility v0.08 2004-May-17
[   11.919249] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver

- et pour Ubuntu studio 13.10

[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.704694] fb0: EFI VGA frame buffer device
[    0.820188] EFI Variables Facility v0.08 2004-May-17
[    1.007921] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver

Peux-tu également répondre à cette question :
si je veux tout réinstaller proprement, faut-il faire un formatage total préalable (et comment ?) ou de toute façon, si je décide de réinstaller par exemple ubuntu 13.10, en indiquant dans la fenêtre adéquat "supprimer les anciennes versions et installer ubuntu 13.10 (attention, vous perdrez tous vos fichiers etc...), ça formate préalablement l'ensemble du disque même le Grub, et EFi et tout ?

Cordialement.

Ubuntu 22.04.1
Mes cartes géographiques en ligne

Hors ligne

#12 Le 23/10/2013, à 14:39

malbo

Re : [résolu] PB installation UbuntuStudio à côté de Ubuntu13.10

Tes deux installations (celle sur sda2 et celle sur sda4) sont donc correctement installées puisqu’elles sont toutes les deux en mode EFI. Je n'ai pas compris pourquoi il y avait mention de grub-pc s'agissant de sda4 (comme je l'ai déjà signalé dans les posts 6 et 8) mais bon...
A présent, tu envisages de "tout réinstaller proprement" mais déjà je n'arrive pas à savoir si tu veux continuer à garder deux Ubuntu (Ubuntu "de base" et Ubuntu Studio) dans ce disque dur ou bien si tu as l'intention de garder seulement un des deux Ubuntu : tu peux préciser ton projet ?

Dernière modification par malbo (Le 23/10/2013, à 14:40)

Hors ligne

#13 Le 23/10/2013, à 14:48

Leonce

Re : [résolu] PB installation UbuntuStudio à côté de Ubuntu13.10

Et bien, l'idée était d'installer les deux avec un choix à l'allumage de l'ordinateur.

En fait, j'aurai aimé comprendre ce qui n'allait pas et réinstaller tout "proprement" : pour être clair, mon installation de Ubuntu - studio ne s'est pas terminée dans les règles, et j'ai comme l'impression que certains plantages apparaissent sur cette session.

Et pour réinstaller proprement, ma question est : faut-il tout formater le disque en amont ? Tout même le secteur de Boot EFI ? Si oui, comment ?

Car j'aimerai bien que les deux installation se déroulent impeccablement sans bidouilles.

Merci tongue

Ubuntu 22.04.1
Mes cartes géographiques en ligne

Hors ligne

#14 Le 23/10/2013, à 16:30

malbo

Re : [résolu] PB installation UbuntuStudio à côté de Ubuntu13.10

Leonce,
Tu devrais lire ce tuto : http://forum.ubuntu-fr.org/viewtopic.ph … #p10911801
Je l'ai écrit pour tenter de me fixer un peu les idées sur la question du multiboot de plusieurs distributions Linux dans le même ordi. Si tu arrives à comprendre ce que j'explique la dedans, tu pourras en déduire que dans ton installation actuelle, tu as une bombe à retardement :
extrait du Boot-Info du post #8 concernant sda2 :

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=5550c0f3-722d-45e8-98a3-9833bd689f28 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
#UUID=F7CD-923F  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda3 during installation
UUID=010297eb-1310-4877-b361-8e2bf8946ad2 none            swap    sw              0       0
UUID=F7CD-923F	/boot/efi	vfat	defaults	0	1

 

Extrait du Boot-Info du post #8 concernant sda4 :

=============================== sda4/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda4 during installation
UUID=179c5022-e15a-47da-9228-16b25771f0c6 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=F7CD-923F  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda3 during installation
UUID=010297eb-1310-4877-b361-8e2bf8946ad2 none            swap    sw              0       0
--------------------------------------------------------------------------------

La bombinette, c'est la ligne suivante qui est présente dans les deux fichiers fstab :

UUID=F7CD-923F  /boot/efi       vfat    defaults        0       1

Le tuto traite du sujet pour expliquer le problème et proposer une solution pour ne pas avoir cette bombinette.

Hors ligne

Pages : 1