webcam logitech_messenger, non resolu :-/ [Résolu]

nicopathe · Le 23/11/2007, à 19:00

j'y arrive pas j'y arrive pas malgré plein de tutos malgré de l'aide (http://www.debutgland.org/forum/viewtopic.php?id=4860)...
au secours.... je veut pas retourner sur windows!

et j'ai bien peur que d'avoir essayer plein de chose il doit y avoir un sacré bordel dans mon ordi!

je sais plus quoi faire. j'espere un coup de main.

Dernière modification par nicopathe (Le 12/12/2007, à 14:57)

sheep · Le 23/11/2007, à 19:51

bonjour,

Pourrais tu nous donner le modèle exact de ta Webcam, ainsi que la version de ubuntu que tu utilises.

As-tu jeté un coup d'oeil à la documentation
Si tu l'as fais, oà¹ est-ce que cela coince?

Dernière modification par sheep (Le 23/11/2007, à 19:53)

nicopathe · Le 23/11/2007, à 20:16

sheep a écrit :

bonjour,
Pourrais tu nous donner le modèle exact de ta Webcam, ainsi que la version de ubuntu que tu utilises.

avec plaisir mon lusb donne ca:
nicolas@nicolas-desktop:~$ lsusb | grep -i logitech
Bus 001 Device 005: ID 046d:c502 Logitech, Inc.
Bus 001 Device 004: ID 046d:08f0 Logitech, Inc. QuickCam Messenger
nicolas@nicolas-desktop:~$

bizarre qu'il y ait deux ligne, non? d'apres les photos que j'ai pu voir la mienne serai 046d:08f0 Logitech, Inc. QuickCam Messenger.

As-tu jeté un coup d'oeil à la documentation
Si tu l'as fais, oà¹ est-ce que cela coince?

oui bien sur... mais j'ai tellement essayer de choses que lors de ce tuto la je ne sais plus ou ca coincait, sinon dans le resultat escompté.

nicopathe · Le 23/11/2007, à 20:19

et je suis sous gusty 7.10 (j'avais oublié)

nicopathe · Le 23/11/2007, à 20:28

en fait voila ou ca coince quand je suis le tuto que tu m'as indiqué:
(désolé c'est long:/ ):

 
Bus 001 Device 005: ID 046d:c502 Logitech, Inc. 
Bus 001 Device 004: ID 046d:08f0 Logitech, Inc. QuickCam Messenger
nicolas@nicolas-desktop:~$ wget http://home.mag.cx/messenger/source/qc-usb-messenger-1.7.tar.gz
--19:22:58--  http://home.mag.cx/messenger/source/qc-usb-messenger-1.7.tar.gz
           => `qc-usb-messenger-1.7.tar.gz.2'
Résolution de home.mag.cx... 82.183.171.139
Connexion vers home.mag.cx|82.183.171.139|:80... connecté.
requête HTTP transmise, en attente de la réponse... 200 OK
Longueur: 168 467 (165K) [application/x-gzip]

100%[====================================>] 168 467      102.22K/s             

19:23:00 (101.93 KB/s) - Â« qc-usb-messenger-1.7.tar.gz.2 Â» sauvegardé [168467/168467]

nicolas@nicolas-desktop:~$ tar xzvf ./qc-usb-messenger-*.tar.gz
qc-usb-messenger-1.7/
qc-usb-messenger-1.7/show.c
qc-usb-messenger-1.7/README
qc-usb-messenger-1.7/qc-pb0100.c
qc-usb-messenger-1.7/README.qce
qc-usb-messenger-1.7/CREDITS
qc-usb-messenger-1.7/qc-hdcs.c
qc-usb-messenger-1.7/quickcam.sh
qc-usb-messenger-1.7/qcweb-info.txt
qc-usb-messenger-1.7/qc-vv6450.c
qc-usb-messenger-1.7/qc-memory.c
qc-usb-messenger-1.7/quickcam.h
qc-usb-messenger-1.7/_README_MESSENGER
qc-usb-messenger-1.7/TODO
qc-usb-messenger-1.7/APPLICATIONS
qc-usb-messenger-1.7/testquickcam/
qc-usb-messenger-1.7/testquickcam/testquickcam.c
qc-usb-messenger-1.7/testquickcam/convert_to_gif.sh
qc-usb-messenger-1.7/testquickcam/CVS/
qc-usb-messenger-1.7/testquickcam/CVS/Entries
qc-usb-messenger-1.7/testquickcam/CVS/Root
qc-usb-messenger-1.7/testquickcam/CVS/Repository
qc-usb-messenger-1.7/testquickcam/Makefile
qc-usb-messenger-1.7/testquickcam/testquickcam.h
qc-usb-messenger-1.7/linux-2.6.7-quickcam.patch
qc-usb-messenger-1.7/videodevfix.h
qc-usb-messenger-1.7/linux-2.6.8.1-quickcam.patch
qc-usb-messenger-1.7/print_exposure.sh
qc-usb-messenger-1.7/FAQ
qc-usb-messenger-1.7/debug.sh
qc-usb-messenger-1.7/Makefile
qc-usb-messenger-1.7/freeshm.sh
qc-usb-messenger-1.7/_CHANGES_MESSENGER
qc-usb-messenger-1.7/qc-vv6410.c
qc-usb-messenger-1.7/qcset.c
qc-usb-messenger-1.7/videodev2.h
qc-usb-messenger-1.7/qc-memory.h
qc-usb-messenger-1.7/linux-2.4.20-quickcam.patch
qc-usb-messenger-1.7/qc-driver.c
qc-usb-messenger-1.7/qc-mjpeg.c
qc-usb-messenger-1.7/QCM
qc-usb-messenger-1.7/qc-formats.c
qc-usb-messenger-1.7/COPYING
qc-usb-messenger-1.7/input_read.c
nicolas@nicolas-desktop:~$ cd ./qc-usb-messenger-*
nicolas@nicolas-desktop:~/qc-usb-messenger-1.7$ sudo ./quickcam.sh
[sudo] password for nicolas:
-=- Logitech QuickCam USB camera driver installer -=-
Hello! I am the (hopefully) easy-to-use, fully automated
qc-usb driver installation script.
At the moment, this is experimental, and if it doesn't work,
don't hesitate to quit this with Ctrl+C and install the
driver manually.

The driver is provided in source code form, so it has to be
compiled. This should happen automatically, but it does mean
that there are some steps required before installation.

You also need to know "root" user password to test and
install the driver.

Basically you need only to keep hitting Enter whenever you
see this prompt: --->. Sometimes you're asked root password.
Pay special attention to lines beginning with [!].
It means that some trouble has been detected.

To most important location is the path to your kernel source
or headers. This can be guessed, but you can specify it by
giving it as an argument to this script like this:
        ./quickcam.sh LINUX_DIR=/usr/src/linux

If you haven't done it yet, now it would be a good moment to
take a look at file README.

Next I'm going to check if you have some important programs installed
and if they and the kernel are of suitable version.
Press Ctrl+C to quit, Enter to continue ---> 

./quickcam.sh
/usr/bin/whoami
/bin/su
/bin/ls
/bin/cat
/usr/bin/gcc
/usr/bin/gcc
/usr/bin/make
/bin/grep
/bin/egrep
/usr/bin/awk
/bin/sed
/usr/bin/tail
/usr/bin/head
/usr/bin/install
/usr/bin/ld
/bin/uname
/usr/bin/tr
/usr/bin/xawtv
/usr/bin/xdpyinfo
/bin/dmesg
/usr/bin/wc
gcc version: version gcc 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)
gcc version: version gcc 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)
Make version: GNU Make 3.81
Linker version: GNU ld (GNU Binutils for Ubuntu) 2.18
Kernel compiler: gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)
[!] Kernel compiler and gcc seem to be different versions.
Instead, they should be the same. If you have many compilers
installed, you can specify the correct one with command (in bash)
        export CC=kgcc
before trying to install the driver. Replace kgcc with the command
required for compiling kernels (kgcc is often used in Red Hat systems).
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue ---> 

Looking for more necessary programs...
Found program /sbin/depmod
Found program /sbin/insmod
Found program /sbin/rmmod
Found program /sbin/modprobe
Found program /bin/mount
Found program /usr/sbin/lsusb
depmod version: module-init-tools 3.3-pre2
insmod version: module-init-tools version 3.3-pre2
rmmod version: module-init-tools version 3.3-pre2
modprobe version: module-init-tools version 3.3-pre2
Checking whether we're root... root
[!] Running script as root.
You shouldn't run this script as root. It should work,
but is unsafe. Please run this as an ordinary user.
When root access is really needed, you will be prompted
for the root password.
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue ---> 

Checking for driver source code...
Checking for write permission...

Previous round done. Now checking if you have kernel source installed.
Press Ctrl+C to quit, Enter to continue ---> 

Kernel source directory: /lib/modules/2.6.22-14-generic/build
Detected kernel version is 2.6.x.
Kernel version name: 2.6.22-14-generic
Kernel source version code: 132630
Driver file name: quickcam.ko
Module install directory: /lib/modules/2.6.22-14-generic
Driver source directory (PWD):         /home/nicolas/qc-usb-messenger-1.7
Kernel source directory (LINUX_DIR):   /lib/modules/2.6.22-14-generic/build
Module install directory (MODULE_DIR): /lib/modules/2.6.22-14-generic
Utility install directory (PREFIX):    /usr/local
User options (USER_OPT):               -DHAVE_UTSRELEASE_H=1
Driver file name (use with insmod):    quickcam.ko
Kernel version code:                   132630

The QuickCam driver requires other drivers from kernel.
I'll now check if those seem to be loaded.
Press Ctrl+C to quit, Enter to continue ---> 

Modules loaded into the kernel:
quickcam nls_iso8859_1 nls_cp437 vfat fat isofs udf ipv6 af_packet binfmt_misc fglrx rfcomm l2cap ppdev acpi_cpufreq cpufreq_stats cpufreq_ondemand freq_table cpufreq_conservative cpufreq_powersave cpufreq_userspace ac container button dock video sbs battery sbp2 lp arc4 ecb blkcipher rc80211_simple rt2500usb rt2x00usb lirc_atiusb snd_usb_audio saa7134_alsa snd_pcm_oss snd_mixer_oss usb_storage ide_core rt2x00lib lirc_dev libusual snd_hda_intel rfkill mac80211 hci_usb snd_pcm ati_remote cfg80211 input_polldev crc_itu_t bluetooth snd_seq_dummy snd_usb_lib quickcam_messenger snd_seq_oss snd_seq_midi snd_seq_midi_event usbvideo parport_pc parport usbhid hid saa7134 cdc_ether usbnet snd_seq video_buf compat_ioctl32 ir_kbd_i2c i2c_core ir_common videodev v4l2_common v4l1_compat serio_raw snd_rawmidi snd_hwdep snd_timer snd_seq_device psmouse pcspkr iTCO_wdt iTCO_vendor_support shpchp snd soundcore snd_page_alloc pci_hotplug intel_agp agpgart evdev ext3 jbd mbcache sg sr_mod cdrom sd_mod ata_piix via_rhine mii ohci1394 ieee1394 floppy ehci_hcd ata_generic libata scsi_mod uhci_hcd usbcore thermal processor fan fuse apparmor commoncap 
[!] The QuickCam driver is already loaded!
You should first remove the (old?) module by issuing
        rmmod mod_quickcam || rmmod quickcam
as root, otherwise I will fail to install the new module.
I will now try to unload it for you automatically,
if you just give me the root password (Ctrl+D to cancel):
=== Entering root mode ===
Trying to unload QuickCam driver...
=== Leaving root mode ===
[!] QuickCam driver failed to unload.
It is not possible to install new version before unloading
the older version. Check that no application is using the
camera, using e.g.
        lsof /dev/video0
or whatever is the camera device file.
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue ---> 


Next round: let's see if you have a supported QuickCam.
Please plug in your USB camera before continuing.
Press Ctrl+C to quit, Enter to continue ---> 

I can find the following probably compatible devices:
Bus 001 Device 004: ID 046d:08f0 Logitech, Inc. QuickCam Messenger

Another round done. Let's now compile the driver, it takes a while.
This step will also clear old unnecessary files from the directory.
Press Ctrl+C to quit, Enter to continue ---> 

rm -f *.o qcset input_read show *~ .\#* .*.cmd *.mod.c *.ko
rm -rf .tmp_versions
cd testquickcam ; make clean
make[1]: entrant dans le répertoire Â« /home/nicolas/qc-usb-messenger-1.7/testquickcam Â»
rm -f testquickcam *~ pic.ppm pic.gif
make[1]: quittant le répertoire Â« /home/nicolas/qc-usb-messenger-1.7/testquickcam Â»
make -C "/lib/modules/2.6.22-14-generic/build" SUBDIRS="/home/nicolas/qc-usb-messenger-1.7" modules V=1 USER_OPT="-DHAVE_UTSRELEASE_H=1"
make[1]: entrant dans le répertoire Â« /usr/src/linux-headers-2.6.22-14-generic Â»
test -e include/linux/autoconf.h -a -e include/config/auto.conf || (           \
        echo;                                                           \
        echo "  ERROR: Kernel configuration is invalid.";               \
        echo "         include/linux/autoconf.h or include/config/auto.conf are missing.";      \
        echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";  \
        echo;                                                           \
        /bin/false)
mkdir -p /home/nicolas/qc-usb-messenger-1.7/.tmp_versions
rm -f /home/nicolas/qc-usb-messenger-1.7/.tmp_versions/*
make -f scripts/Makefile.build obj=/home/nicolas/qc-usb-messenger-1.7
  gcc -m32 -Wp,-MD,/home/nicolas/qc-usb-messenger-1.7/.qc-driver.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args   -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DNOKERNEL -DHAVE_UTSRELEASE_H=1  -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(qc_driver)"  -D"KBUILD_MODNAME=KBUILD_STR(quickcam)" -c -o /home/nicolas/qc-usb-messenger-1.7/.tmp_qc-driver.o /home/nicolas/qc-usb-messenger-1.7/qc-driver.c
/home/nicolas/qc-usb-messenger-1.7/qc-driver.c: In function Â«qc_int_init":
/home/nicolas/qc-usb-messenger-1.7/qc-driver.c:850: attention : passing argument 6 of Â«usb_fill_int_urb" from incompatible pointer type
/home/nicolas/qc-usb-messenger-1.7/qc-driver.c: In function Â«qc_isoc_start":
/home/nicolas/qc-usb-messenger-1.7/qc-driver.c:2209: attention : assignment from incompatible pointer type
  gcc -m32 -Wp,-MD,/home/nicolas/qc-usb-messenger-1.7/.qc-vv6450.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args   -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DNOKERNEL -DHAVE_UTSRELEASE_H=1  -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(qc_vv6450)"  -D"KBUILD_MODNAME=KBUILD_STR(quickcam)" -c -o /home/nicolas/qc-usb-messenger-1.7/.tmp_qc-vv6450.o /home/nicolas/qc-usb-messenger-1.7/qc-vv6450.c
  gcc -m32 -Wp,-MD,/home/nicolas/qc-usb-messenger-1.7/.qc-formats.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args   -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DNOKERNEL -DHAVE_UTSRELEASE_H=1  -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(qc_formats)"  -D"KBUILD_MODNAME=KBUILD_STR(quickcam)" -c -o /home/nicolas/qc-usb-messenger-1.7/.tmp_qc-formats.o /home/nicolas/qc-usb-messenger-1.7/qc-formats.c
  gcc -m32 -Wp,-MD,/home/nicolas/qc-usb-messenger-1.7/.qc-memory.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args   -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DNOKERNEL -DHAVE_UTSRELEASE_H=1  -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(qc_memory)"  -D"KBUILD_MODNAME=KBUILD_STR(quickcam)" -c -o /home/nicolas/qc-usb-messenger-1.7/.tmp_qc-memory.o /home/nicolas/qc-usb-messenger-1.7/qc-memory.c
  ld -m elf_i386 -m elf_i386  -r -o /home/nicolas/qc-usb-messenger-1.7/quickcam.o /home/nicolas/qc-usb-messenger-1.7/qc-driver.o /home/nicolas/qc-usb-messenger-1.7/qc-vv6450.o /home/nicolas/qc-usb-messenger-1.7/qc-formats.o /home/nicolas/qc-usb-messenger-1.7/qc-memory.o
  Building modules, stage 2.
make -f /usr/src/linux-headers-2.6.22-14-generic/scripts/Makefile.modpost
  scripts/mod/modpost -m -a -i /usr/src/linux-headers-2.6.22-14-generic/Module.symvers -I /home/nicolas/qc-usb-messenger-1.7/Module.symvers -o /home/nicolas/qc-usb-messenger-1.7/Module.symvers -w
  gcc -m32 -Wp,-MD,/home/nicolas/qc-usb-messenger-1.7/.quickcam.mod.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args   -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign    -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(quickcam.mod)"  -D"KBUILD_MODNAME=KBUILD_STR(quickcam)" -DMODULE -c -o /home/nicolas/qc-usb-messenger-1.7/quickcam.mod.o /home/nicolas/qc-usb-messenger-1.7/quickcam.mod.c
  ld -m elf_i386 -m elf_i386 -r -o /home/nicolas/qc-usb-messenger-1.7/quickcam.ko /home/nicolas/qc-usb-messenger-1.7/quickcam.o /home/nicolas/qc-usb-messenger-1.7/quickcam.mod.o
make[1]: quittant le répertoire Â« /usr/src/linux-headers-2.6.22-14-generic Â»
gcc -Wall -O2 -s qcset.c -o qcset -lm
qcset.c: In function Â«pnm_open":
qcset.c:383: attention : pointer targets in passing argument 1 of Â«fopen" differ in signedness
qcset.c: In function Â«main":
qcset.c:642: attention : pointer targets in passing argument 1 of Â«pnm_open" differ in signedness
gcc -Wall -O2 -s input_read.c -o input_read
-rw-r--r-- 1 root root 723368 2007-11-23 19:25 quickcam.ko

Now everything should be well and the driver compiled.
Let's then try actually loading the fresh driver and testing
if it works.
Press Ctrl+C to quit, Enter to continue ---> 

To load the driver, I need to know the root password.
=== Entering root mode ===

I will now try to enable the SysRq key.
If your computer crashes, you can try pressing:
        Alt + SysRq + S: Emergency Sync (write everything on hard disk)
        Alt + SysRq + U: Unmount all harddisks
        Alt + SysRq + B: Reboot system immediately
Press Ctrl+C to quit, Enter to continue ---> 

Now I finally will try to load the module.
If you're unlucky, your computer might crash right now!!!!
Consider long if you really want to continue.
Press Ctrl+C to quit, Enter to continue ---> 

You decided to do it, here we go...
=== Leaving root mode ===
The driver detected the following supported cameras:
[ 3990.319754] quickcam [ 9.222317]: ----------LOADING QUICKCAM MODULE------------
[ 3990.319763] quickcam [ 9.222326]: struct quickcam size: 4464
[ 3990.319817] usbcore: registered new interface driver quickcam
usr/bin/realpath: need at least one filename
Usage:
 usr/bin/realpath [-s|--strip] [-z|--zero] filename ...
 usr/bin/realpath -h|--help
 usr/bin/realpath -v|--version
I will be using , if there are more cameras I'll not test them.
Press Ctrl+C to quit, Enter to continue ---> 

Testing if  is correct.
ls: : Aucun fichier ou répertoire de ce type
[!] You don't have read/write access to .
On many distributions, you should add yourself into the
"video" group by giving command
        adduser root video
and then log in again to be able to access the video.
A quick alternative is just to do
        chmod a+rw 
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue ---> 

ls: : Aucun fichier ou répertoire de ce type
ls: : Aucun fichier ou répertoire de ce type
[!]  major number is .
Usually it should be 81, so there are problems ahead.
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue ---> 


Right now driver is loaded and should be ready to run.
Let's test if user applications can see it, starting with qcset.
Press Ctrl+C to quit, Enter to continue ---> 

./qcset: invalid configuration request type
[!] qcset did not found the QuickCam camera
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue ---> 

If you like, you can quit now and start using the camera -
you have good chances that it works, if no problems were detected.
If you have X Window System running and xawtv installed,
I can now run it automatically for you.
You will then also have opportunity to install the driver permanently.
Press Ctrl+C to quit, Enter to continue ---> 

Launching xawtv (press q on xawtv window to quit it)...
If the image is not sharp, try focusing it by turning the
wheel around the camera lens.
        xawtv -noscale -noxv -c ""
This is xawtv-3.95.dfsg.1, running on Linux/i686 (2.6.22-14-generic)
WARNING: Your X-Server has no DGA support.
WARNING: couldn't find framebuffer base address, try manual
         configuration ("v4l-conf -a <addr>")
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct
ioctl: VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x80bd89c;fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_OVERLAY(int=0): Argument invalide
ioctl: VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x80bd89c;fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_OVERLAY(int=0): Argument invalide
ioctl: VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x80bd89c;fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_OVERLAY(int=0): Argument invalide
ioctl: VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x80bd89c;fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_OVERLAY(int=0): Argument invalide
ioctl: VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x80bd89c;fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_OVERLAY(int=0): Argument invalide
ioctl: VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x80bd89c;fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_OVERLAY(int=0): Argument invalide
ioctl: VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x80bd89c;fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_OVERLAY(int=0): Argument invalide
ioctl: VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x80bd89c;fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_OVERLAY(int=0): Argument invalide
ioctl: VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x80bd89c;fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_OVERLAY(int=0): Argument invalide
ioctl: VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x80bd89c;fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_OVERLAY(int=0): Argument invalide
ioctl: VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x80bd89c;fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_OVERLAY(int=0): Argument invalide
ioctl: VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=618;fmt.win.w.top=448;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x80bd89c;fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_OVERLAY(int=0): Argument invalide

sheep · Le 23/11/2007, à 20:30

la deuxieme ligne logitech ne serait-elle pas ton clavier, ou ta souris?

Sinon pour ta webcam c'est cette partie de la documentation qui te concernes.

Peux-tu la refaire en notant ici, les eventuels messages d'erreur que tu pourrais obtenir?

ok t'es plus rapide que moi

Dernière modification par sheep (Le 23/11/2007, à 20:31)

nicopathe · Le 23/11/2007, à 20:33

sheep a écrit :

la deuxieme ligne logitech ne serait-elle pas ton clavier, ou ta souris?

Mais oui mais c'est bien sur!

ok t'es plus rapide que moi

j'espere que c'est pas ma femme qui ta dit ca!

sheep · Le 23/11/2007, à 20:42

Je n'ai pas l'honneur de connaitre ta femme.

Bon j'ai trouvé un petit truc qui me chagrine dans ton log:

The QuickCam driver is already loaded!
You should first remove the (old?) module by issuing
        rmmod mod_quickcam || rmmod quickcam
as root, otherwise I will fail to install the new module.
I will now try to unload it for you automatically,
if you just give me the root password (Ctrl+D to cancel):
=== Entering root mode ===
Trying to unload QuickCam driver...
=== Leaving root mode ===
[!] QuickCam driver failed to unload.
It is not possible to install new version before unloading
the older version. Check that no application is using the
camera, using e.g.
        lsof /dev/video0
or whatever is the camera device file.

Il semblerait que le driver soit déjà installé (voir fonctionnel), as-tu essayer de lancer xawtv, camorama, au pire vlc voir si un des trois ne trouverais pas ta cam (j'ai eu un cas qui ne marchait pas avec xawtv, mais qui fonctionnait avec camoram)

nicopathe · Le 23/11/2007, à 20:55

j'ai essayé camorama et xaw tv sans succes.
vlc je savais pas que c'etait possible. m'en vais voir ca.
j'ai peut etre installé a la fois un driver quickcam et un quickcam_messenger (je crois que le deuxieme est le bon.)
crois tu que je doive :
$ sudo rmmod mod_quickcam || rmmod quickcam
?( sans vraiment savoir ce que ca veut dire ... effacer peut etre?)

nicopathe · Le 23/11/2007, à 20:57

vlc==> ouvrir un perih de capture. ==> marche pas mieux...

sheep · Le 23/11/2007, à 21:03

crois tu que je doive :
$ sudo rmmod mod_quickcam || rmmod quickcam

c'est ce qu'il est préconisé de faire, donc je penses qu'il faut que tu fasses ceci avant de recommencer.

le man de rmmod donne:

rmmod â€” simple program to remove a module from the Linux Kernel

lance donc la commande, puis recommence la procedure d'installation, et reposte le message voir si il y a d'autres soucis a régler.

nicopathe · Le 23/11/2007, à 21:06

aie :-/
désolé :

nicolas@nicolas-desktop:~/qc-usb-messenger-1.7$ sudo rmmod mod_quickcam || rmmod quickcam
[sudo] password for nicolas:
ERROR: Module mod_quickcam does not exist in /proc/modules
ERROR: Removing 'quickcam': Operation not permitted
nicolas@nicolas-desktop:~/qc-usb-messenger-1.7$

sheep · Le 23/11/2007, à 21:09

bon ben tu as réussi a le décharger, relance la procédure d'installation

nicopathe · Le 23/11/2007, à 21:10

sheep a écrit :

bon ben tu as réussi a le décharger, relance la procédure d'installation

tu crois? malgrél e message d'erreur?
bon je relance....

nicopathe · Le 23/11/2007, à 21:15

desolé pas mieux.

nicolas@nicolas-desktop:~$ wget http://home.mag.cx/messenger/source/qc-usb-messenger-1.7.tar.gz
--20:12:13--  http://home.mag.cx/messenger/source/qc-usb-messenger-1.7.tar.gz
           => `qc-usb-messenger-1.7.tar.gz.3'
Résolution de home.mag.cx... 82.183.171.139
Connexion vers home.mag.cx|82.183.171.139|:80... connecté.
requête HTTP transmise, en attente de la réponse... 200 OK
Longueur: 168 467 (165K) [application/x-gzip]

100%[====================================>] 168 467      102.98K/s             

20:12:15 (102.79 KB/s) - Â« qc-usb-messenger-1.7.tar.gz.3 Â» sauvegardé [168467/168467]

nicolas@nicolas-desktop:~$ tar xzvf ./qc-usb-messenger-*.tar.gz
qc-usb-messenger-1.7/
qc-usb-messenger-1.7/show.c
qc-usb-messenger-1.7/README
qc-usb-messenger-1.7/qc-pb0100.c
qc-usb-messenger-1.7/README.qce
qc-usb-messenger-1.7/CREDITS
qc-usb-messenger-1.7/qc-hdcs.c
qc-usb-messenger-1.7/quickcam.sh
qc-usb-messenger-1.7/qcweb-info.txt
qc-usb-messenger-1.7/qc-vv6450.c
qc-usb-messenger-1.7/qc-memory.c
qc-usb-messenger-1.7/quickcam.h
qc-usb-messenger-1.7/_README_MESSENGER
qc-usb-messenger-1.7/TODO
qc-usb-messenger-1.7/APPLICATIONS
qc-usb-messenger-1.7/testquickcam/
qc-usb-messenger-1.7/testquickcam/testquickcam.c
qc-usb-messenger-1.7/testquickcam/convert_to_gif.sh
qc-usb-messenger-1.7/testquickcam/CVS/
qc-usb-messenger-1.7/testquickcam/CVS/Entries
qc-usb-messenger-1.7/testquickcam/CVS/Root
qc-usb-messenger-1.7/testquickcam/CVS/Repository
qc-usb-messenger-1.7/testquickcam/Makefile
qc-usb-messenger-1.7/testquickcam/testquickcam.h
qc-usb-messenger-1.7/linux-2.6.7-quickcam.patch
qc-usb-messenger-1.7/videodevfix.h
qc-usb-messenger-1.7/linux-2.6.8.1-quickcam.patch
qc-usb-messenger-1.7/print_exposure.sh
qc-usb-messenger-1.7/FAQ
qc-usb-messenger-1.7/debug.sh
qc-usb-messenger-1.7/Makefile
qc-usb-messenger-1.7/freeshm.sh
qc-usb-messenger-1.7/_CHANGES_MESSENGER
qc-usb-messenger-1.7/qc-vv6410.c
qc-usb-messenger-1.7/qcset.c
qc-usb-messenger-1.7/videodev2.h
qc-usb-messenger-1.7/qc-memory.h
qc-usb-messenger-1.7/linux-2.4.20-quickcam.patch
qc-usb-messenger-1.7/qc-driver.c
qc-usb-messenger-1.7/qc-mjpeg.c
qc-usb-messenger-1.7/QCM
qc-usb-messenger-1.7/qc-formats.c
qc-usb-messenger-1.7/COPYING
qc-usb-messenger-1.7/input_read.c
nicolas@nicolas-desktop:~$ cd ./qc-usb-messenger-*
nicolas@nicolas-desktop:~/qc-usb-messenger-1.7$ sudo ./quickcam.sh
[sudo] password for nicolas:
-=- Logitech QuickCam USB camera driver installer -=-
Hello! I am the (hopefully) easy-to-use, fully automated
qc-usb driver installation script.
At the moment, this is experimental, and if it doesn't work,
don't hesitate to quit this with Ctrl+C and install the
driver manually.

The driver is provided in source code form, so it has to be
compiled. This should happen automatically, but it does mean
that there are some steps required before installation.

You also need to know "root" user password to test and
install the driver.

Basically you need only to keep hitting Enter whenever you
see this prompt: --->. Sometimes you're asked root password.
Pay special attention to lines beginning with [!].
It means that some trouble has been detected.

To most important location is the path to your kernel source
or headers. This can be guessed, but you can specify it by
giving it as an argument to this script like this:
        ./quickcam.sh LINUX_DIR=/usr/src/linux

If you haven't done it yet, now it would be a good moment to
take a look at file README.

Next I'm going to check if you have some important programs installed
and if they and the kernel are of suitable version.
Press Ctrl+C to quit, Enter to continue ---> 

./quickcam.sh
/usr/bin/whoami
/bin/su
/bin/ls
/bin/cat
/usr/bin/gcc
/usr/bin/gcc
/usr/bin/make
/bin/grep
/bin/egrep
/usr/bin/awk
/bin/sed
/usr/bin/tail
/usr/bin/head
/usr/bin/install
/usr/bin/ld
/bin/uname
/usr/bin/tr
/usr/bin/xawtv
/usr/bin/xdpyinfo
/bin/dmesg
/usr/bin/wc
gcc version: version gcc 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)
gcc version: version gcc 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)
Make version: GNU Make 3.81
Linker version: GNU ld (GNU Binutils for Ubuntu) 2.18
Kernel compiler: gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)
[!] Kernel compiler and gcc seem to be different versions.
Instead, they should be the same. If you have many compilers
installed, you can specify the correct one with command (in bash)
        export CC=kgcc
before trying to install the driver. Replace kgcc with the command
required for compiling kernels (kgcc is often used in Red Hat systems).
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue ---> 

Looking for more necessary programs...
Found program /sbin/depmod
Found program /sbin/insmod
Found program /sbin/rmmod
Found program /sbin/modprobe
Found program /bin/mount
Found program /usr/sbin/lsusb
depmod version: module-init-tools 3.3-pre2
insmod version: module-init-tools version 3.3-pre2
rmmod version: module-init-tools version 3.3-pre2
modprobe version: module-init-tools version 3.3-pre2
Checking whether we're root... root
[!] Running script as root.
You shouldn't run this script as root. It should work,
but is unsafe. Please run this as an ordinary user.
When root access is really needed, you will be prompted
for the root password.
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue ---> 

Checking for driver source code...
Checking for write permission...

Previous round done. Now checking if you have kernel source installed.
Press Ctrl+C to quit, Enter to continue ---> 

Kernel source directory: /lib/modules/2.6.22-14-generic/build
Detected kernel version is 2.6.x.
Kernel version name: 2.6.22-14-generic
Kernel source version code: 132630
Driver file name: quickcam.ko
Module install directory: /lib/modules/2.6.22-14-generic
Driver source directory (PWD):         /home/nicolas/qc-usb-messenger-1.7
Kernel source directory (LINUX_DIR):   /lib/modules/2.6.22-14-generic/build
Module install directory (MODULE_DIR): /lib/modules/2.6.22-14-generic
Utility install directory (PREFIX):    /usr/local
User options (USER_OPT):               -DHAVE_UTSRELEASE_H=1
Driver file name (use with insmod):    quickcam.ko
Kernel version code:                   132630

The QuickCam driver requires other drivers from kernel.
I'll now check if those seem to be loaded.
Press Ctrl+C to quit, Enter to continue ---> 

Modules loaded into the kernel:
quickcam nls_iso8859_1 nls_cp437 vfat fat isofs udf ipv6 af_packet binfmt_misc fglrx rfcomm l2cap ppdev acpi_cpufreq cpufreq_stats cpufreq_ondemand freq_table cpufreq_conservative cpufreq_powersave cpufreq_userspace ac container button dock video sbs battery sbp2 lp arc4 ecb blkcipher rc80211_simple rt2500usb rt2x00usb lirc_atiusb snd_usb_audio saa7134_alsa snd_pcm_oss snd_mixer_oss usb_storage ide_core rt2x00lib lirc_dev libusual snd_hda_intel rfkill mac80211 hci_usb snd_pcm ati_remote cfg80211 input_polldev crc_itu_t bluetooth snd_seq_dummy snd_usb_lib quickcam_messenger snd_seq_oss snd_seq_midi snd_seq_midi_event usbvideo parport_pc parport usbhid hid saa7134 cdc_ether usbnet snd_seq video_buf compat_ioctl32 ir_kbd_i2c i2c_core ir_common videodev v4l2_common v4l1_compat serio_raw snd_rawmidi snd_hwdep snd_timer snd_seq_device psmouse pcspkr iTCO_wdt iTCO_vendor_support shpchp snd soundcore snd_page_alloc pci_hotplug intel_agp agpgart evdev ext3 jbd mbcache sg sr_mod cdrom sd_mod ata_piix via_rhine mii ohci1394 ieee1394 floppy ehci_hcd ata_generic libata scsi_mod uhci_hcd usbcore thermal processor fan fuse apparmor commoncap 
[!] The QuickCam driver is already loaded!
You should first remove the (old?) module by issuing
        rmmod mod_quickcam || rmmod quickcam
as root, otherwise I will fail to install the new module.
I will now try to unload it for you automatically,
if you just give me the root password (Ctrl+D to cancel):
=== Entering root mode ===
Trying to unload QuickCam driver...
=== Leaving root mode ===
[!] QuickCam driver failed to unload.
It is not possible to install new version before unloading
the older version. Check that no application is using the
camera, using e.g.
        lsof /dev/video0
or whatever is the camera device file.
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue ---> 


Next round: let's see if you have a supported QuickCam.
Please plug in your USB camera before continuing.
Press Ctrl+C to quit, Enter to continue ---> 

I can find the following probably compatible devices:
Bus 001 Device 004: ID 046d:08f0 Logitech, Inc. QuickCam Messenger

Another round done. Let's now compile the driver, it takes a while.
This step will also clear old unnecessary files from the directory.
Press Ctrl+C to quit, Enter to continue ---> 

rm -f *.o qcset input_read show *~ .\#* .*.cmd *.mod.c *.ko
rm -rf .tmp_versions
cd testquickcam ; make clean
make[1]: entrant dans le répertoire Â« /home/nicolas/qc-usb-messenger-1.7/testquickcam Â»
rm -f testquickcam *~ pic.ppm pic.gif
make[1]: quittant le répertoire Â« /home/nicolas/qc-usb-messenger-1.7/testquickcam Â»
make -C "/lib/modules/2.6.22-14-generic/build" SUBDIRS="/home/nicolas/qc-usb-messenger-1.7" modules V=1 USER_OPT="-DHAVE_UTSRELEASE_H=1"
make[1]: entrant dans le répertoire Â« /usr/src/linux-headers-2.6.22-14-generic Â»
test -e include/linux/autoconf.h -a -e include/config/auto.conf || (           \
        echo;                                                           \
        echo "  ERROR: Kernel configuration is invalid.";               \
        echo "         include/linux/autoconf.h or include/config/auto.conf are missing.";      \
        echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";  \
        echo;                                                           \
        /bin/false)
mkdir -p /home/nicolas/qc-usb-messenger-1.7/.tmp_versions
rm -f /home/nicolas/qc-usb-messenger-1.7/.tmp_versions/*
make -f scripts/Makefile.build obj=/home/nicolas/qc-usb-messenger-1.7
  gcc -m32 -Wp,-MD,/home/nicolas/qc-usb-messenger-1.7/.qc-driver.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args   -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DNOKERNEL -DHAVE_UTSRELEASE_H=1  -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(qc_driver)"  -D"KBUILD_MODNAME=KBUILD_STR(quickcam)" -c -o /home/nicolas/qc-usb-messenger-1.7/.tmp_qc-driver.o /home/nicolas/qc-usb-messenger-1.7/qc-driver.c
/home/nicolas/qc-usb-messenger-1.7/qc-driver.c: In function Â«qc_int_init":
/home/nicolas/qc-usb-messenger-1.7/qc-driver.c:850: attention : passing argument 6 of Â«usb_fill_int_urb" from incompatible pointer type
/home/nicolas/qc-usb-messenger-1.7/qc-driver.c: In function Â«qc_isoc_start":
/home/nicolas/qc-usb-messenger-1.7/qc-driver.c:2209: attention : assignment from incompatible pointer type
  gcc -m32 -Wp,-MD,/home/nicolas/qc-usb-messenger-1.7/.qc-vv6450.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args   -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DNOKERNEL -DHAVE_UTSRELEASE_H=1  -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(qc_vv6450)"  -D"KBUILD_MODNAME=KBUILD_STR(quickcam)" -c -o /home/nicolas/qc-usb-messenger-1.7/.tmp_qc-vv6450.o /home/nicolas/qc-usb-messenger-1.7/qc-vv6450.c
  gcc -m32 -Wp,-MD,/home/nicolas/qc-usb-messenger-1.7/.qc-formats.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args   -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DNOKERNEL -DHAVE_UTSRELEASE_H=1  -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(qc_formats)"  -D"KBUILD_MODNAME=KBUILD_STR(quickcam)" -c -o /home/nicolas/qc-usb-messenger-1.7/.tmp_qc-formats.o /home/nicolas/qc-usb-messenger-1.7/qc-formats.c
  gcc -m32 -Wp,-MD,/home/nicolas/qc-usb-messenger-1.7/.qc-memory.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args   -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DNOKERNEL -DHAVE_UTSRELEASE_H=1  -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(qc_memory)"  -D"KBUILD_MODNAME=KBUILD_STR(quickcam)" -c -o /home/nicolas/qc-usb-messenger-1.7/.tmp_qc-memory.o /home/nicolas/qc-usb-messenger-1.7/qc-memory.c
  ld -m elf_i386 -m elf_i386  -r -o /home/nicolas/qc-usb-messenger-1.7/quickcam.o /home/nicolas/qc-usb-messenger-1.7/qc-driver.o /home/nicolas/qc-usb-messenger-1.7/qc-vv6450.o /home/nicolas/qc-usb-messenger-1.7/qc-formats.o /home/nicolas/qc-usb-messenger-1.7/qc-memory.o
  Building modules, stage 2.
make -f /usr/src/linux-headers-2.6.22-14-generic/scripts/Makefile.modpost
  scripts/mod/modpost -m -a -i /usr/src/linux-headers-2.6.22-14-generic/Module.symvers -I /home/nicolas/qc-usb-messenger-1.7/Module.symvers -o /home/nicolas/qc-usb-messenger-1.7/Module.symvers -w
  gcc -m32 -Wp,-MD,/home/nicolas/qc-usb-messenger-1.7/.quickcam.mod.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args   -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign    -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(quickcam.mod)"  -D"KBUILD_MODNAME=KBUILD_STR(quickcam)" -DMODULE -c -o /home/nicolas/qc-usb-messenger-1.7/quickcam.mod.o /home/nicolas/qc-usb-messenger-1.7/quickcam.mod.c
  ld -m elf_i386 -m elf_i386 -r -o /home/nicolas/qc-usb-messenger-1.7/quickcam.ko /home/nicolas/qc-usb-messenger-1.7/quickcam.o /home/nicolas/qc-usb-messenger-1.7/quickcam.mod.o
make[1]: quittant le répertoire Â« /usr/src/linux-headers-2.6.22-14-generic Â»
gcc -Wall -O2 -s qcset.c -o qcset -lm
qcset.c: In function Â«pnm_open":
qcset.c:383: attention : pointer targets in passing argument 1 of Â«fopen" differ in signedness
qcset.c: In function Â«main":
qcset.c:642: attention : pointer targets in passing argument 1 of Â«pnm_open" differ in signedness
gcc -Wall -O2 -s input_read.c -o input_read
-rw-r--r-- 1 root root 723368 2007-11-23 20:13 quickcam.ko

Now everything should be well and the driver compiled.
Let's then try actually loading the fresh driver and testing
if it works.
Press Ctrl+C to quit, Enter to continue ---> 

To load the driver, I need to know the root password.
=== Entering root mode ===

I will now try to enable the SysRq key.
If your computer crashes, you can try pressing:
        Alt + SysRq + S: Emergency Sync (write everything on hard disk)
        Alt + SysRq + U: Unmount all harddisks
        Alt + SysRq + B: Reboot system immediately
Press Ctrl+C to quit, Enter to continue ---> 

Now I finally will try to load the module.
If you're unlucky, your computer might crash right now!!!!
Consider long if you really want to continue.
Press Ctrl+C to quit, Enter to continue ---> 

You decided to do it, here we go...
=== Leaving root mode ===
The driver detected the following supported cameras:
[ 6828.182143] quickcam [34.181701]: ----------LOADING QUICKCAM MODULE------------
[ 6828.182152] quickcam [34.181711]: struct quickcam size: 4464
[ 6828.193304] usbcore: registered new interface driver quickcam
usr/bin/realpath: need at least one filename
Usage:
 usr/bin/realpath [-s|--strip] [-z|--zero] filename ...
 usr/bin/realpath -h|--help
 usr/bin/realpath -v|--version
I will be using , if there are more cameras I'll not test them.
Press Ctrl+C to quit, Enter to continue ---> 

Testing if  is correct.
ls: : Aucun fichier ou répertoire de ce type
[!] You don't have read/write access to .
On many distributions, you should add yourself into the
"video" group by giving command
        adduser root video
and then log in again to be able to access the video.
A quick alternative is just to do
        chmod a+rw 
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue ---> 

ls: : Aucun fichier ou répertoire de ce type
ls: : Aucun fichier ou répertoire de ce type
[!]  major number is .
Usually it should be 81, so there are problems ahead.
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue ---> 


Right now driver is loaded and should be ready to run.
Let's test if user applications can see it, starting with qcset.
Press Ctrl+C to quit, Enter to continue ---> 

./qcset: invalid configuration request type
[!] qcset did not found the QuickCam camera
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue ---> 

If you like, you can quit now and start using the camera -
you have good chances that it works, if no problems were detected.
If you have X Window System running and xawtv installed,
I can now run it automatically for you.
You will then also have opportunity to install the driver permanently.
Press Ctrl+C to quit, Enter to continue ---> 

Launching xawtv (press q on xawtv window to quit it)...
If the image is not sharp, try focusing it by turning the
wheel around the camera lens.
        xawtv -noscale -noxv -c ""
This is xawtv-3.95.dfsg.1, running on Linux/i686 (2.6.22-14-generic)
WARNING: Your X-Server has no DGA support.
WARNING: couldn't find framebuffer base address, try manual
         configuration ("v4l-conf -a <addr>")
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct
ioctl: VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=207;fmt.win.w.top=46;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=207;fmt.win.w.top=46;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x80bd89c;fmt.win.clipcount=0;fmt.win.bitmap=(nil)): Argument invalide
ioctl: VIDIOC_OVERLAY(int=0): Argument invalide

pà´ simple....

nicopathe · Le 23/11/2007, à 21:17

toujours ca d'etrange:
[

Modules loaded into the kernel:
quickcam nls_iso8859_1 nls_cp437 vfat fat isofs udf ipv6 af_packet binfmt_misc fglrx rfcomm l2cap ppdev acpi_cpufreq cpufreq_stats cpufreq_ondemand freq_table cpufreq_conservative cpufreq_powersave cpufreq_userspace ac container button dock video sbs battery sbp2 lp arc4 ecb blkcipher rc80211_simple rt2500usb rt2x00usb lirc_atiusb snd_usb_audio saa7134_alsa snd_pcm_oss snd_mixer_oss usb_storage ide_core rt2x00lib lirc_dev libusual snd_hda_intel rfkill mac80211 hci_usb snd_pcm ati_remote cfg80211 input_polldev crc_itu_t bluetooth snd_seq_dummy snd_usb_lib quickcam_messenger snd_seq_oss snd_seq_midi snd_seq_midi_event usbvideo parport_pc parport usbhid hid saa7134 cdc_ether usbnet snd_seq video_buf compat_ioctl32 ir_kbd_i2c i2c_core ir_common videodev v4l2_common v4l1_compat serio_raw snd_rawmidi snd_hwdep snd_timer snd_seq_device psmouse pcspkr iTCO_wdt iTCO_vendor_support shpchp snd soundcore snd_page_alloc pci_hotplug intel_agp agpgart evdev ext3 jbd mbcache sg sr_mod cdrom sd_mod ata_piix via_rhine mii ohci1394 ieee1394 floppy ehci_hcd ata_generic libata scsi_mod uhci_hcd usbcore thermal processor fan fuse apparmor commoncap
[!] The QuickCam driver is already loaded!
You should first remove the (old?) module by issuing
rmmod mod_quickcam || rmmod quickcam
as root, otherwise I will fail to install the new module.
I will now try to unload it for you automatically,
if you just give me the root password (Ctrl+D to cancel):
=== Entering root mode ===
Trying to unload QuickCam driver...
=== Leaving root mode ===
[!] QuickCam driver failed to unload.
It is not possible to install new version before unloading
the older version. Check that no application is using the
camera, using e.g.
lsof /dev/video0
or whatever is the camera device file.

nicopathe · Le 23/11/2007, à 23:06

peut etre que le pb viens de la:
"nicolas@nicolas-desktop:~/qc-usb-messenger-1.7$ sudo rmmod mod_quickcam || rmmod quickcam
[sudo] password for nicolas:
ERROR: Module mod_quickcam does not exist in /proc/modules
ERROR: Removing 'quickcam': Operation not permitted
nicolas@nicolas-desktop:~/qc-usb-messenger-1.7$
"

sheep · Le 23/11/2007, à 23:29

essaye juste en tapant:

sudo rmmod quickcam

nicopathe · Le 23/11/2007, à 23:55

:-(:-(:-( toujours pas
grrrrrrrrr
je cite tous les messages d'erreur et ala fin le rapport en entier
j'ai traduit chaque message mais c'est plutot pour moi :-)

[!] Kernel compiler and gcc seem to be different versions.
Instead, they should be the same. If you have many compilers
installed, you can specify the correct one with command (in bash)
export CC=kgcc
before trying to install the driver. Replace kgcc with the command
required for compiling kernels (kgcc is often used in Red Hat systems).
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.

Kernel compilateur et gcc semblent être différentes versions.
Au lieu de cela, ils devraient être les mêmes. Si vous avez plusieurs compilateurs
Installé, vous pouvez spécifier le nom correct de la commande (en bash)
         Exportation CC = kgcc
Avant d'essayer d'installer le pilote. Remplacer kgcc avec la commande
Nécessaires à  la compilation de noyaux (kgcc est souvent utilisée dans les systèmes Red Hat).
AVERTISSEMENT: Si vous appuyez sur la touche Entrée, je vais essayer de continuer quand même,
Mais c'est probablement ce qui va échouer.

[!] Running script as root.
You shouldn't run this script as root. It should work,
but is unsafe. Please run this as an ordinary user.
When root access is really needed, you will be prompted
for the root password.
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.

Exécution de script en tant que root.
Vous ne devriez pas exécuter ce script en tant que root. Il devrait travailler,
Mais il est dangereux. Veuillez exécuter cette comme un utilisateur ordinaire.
Lorsque l'accès root est vraiment nécessaire, il vous sera demandé
Pour le mot de passe root.
AVERTISSEMENT: Si vous appuyez sur la touche Entrée, je vais essayer de continuer quand même,
Mais c'est probablement ce qui va échouer

[!] The QuickCam driver is already loaded!
You should first remove the (old?) module by issuing
rmmod mod_quickcam || rmmod quickcam
as root, otherwise I will fail to install the new module.
I will now try to unload it for you automatically,
if you just give me the root password (Ctrl+D to cancel):
=== Entering root mode ===
Trying to unload QuickCam driver...
ERROR: Module quickcam does not exist in /proc/modules
ERROR: Module mod_quickcam does not exist in /proc/modules
=== Leaving root mode ===
[!] QuickCam driver failed to unload.
It is not possible to install new version before unloading
the older version. Check that no application is using the
camera, using e.g.
lsof /dev/video0
or whatever is the camera device file.
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Essayer de décharger QuickCam pilote ...
ERREUR: Module quickcam n'existe pas dans / proc / modules de
ERREUR: Module mod_quickcam n'existe pas dans / proc / modules de
Quitter le mode racine === ===
[!] QuickCam pilote a échoué à décharger.
Il n'est pas possible d'installer une nouvelle version avant le déchargement
L'ancienne version. Vérifiez que la demande n'est pas en utilisant les
Appareil photo, en utilisant par exemple
Lsof / dev/video0
Ou quel que soit l'appareil périphérique fichier.
AVERTISSEMENT: Si vous appuyez sur la touche Entrée, je vais essayer de continuer quand même,
Mais c'est probablement ce qui va échouer

[!] You don't have read/write access to .
On many distributions, you should add yourself into the
"video" group by giving command
adduser root video
and then log in again to be able to access the video.
A quick alternative is just to do
chmod a+rw
Vous n'avez pas accès en lecture / écriture.
Sur la plupart des distributions, vous devez ajouter vous-même dans la
"Vidéo" du groupe en donnant commande
Adduser racine vidéo
Et de vous connecter à nouveau être en mesure d'accéder à la vidéo.
Un rapide alternative est juste de le faire
Chmoder un + RW

[!] major number is .
Usually it should be 81, so there are problems ahead.
WARNING: If you press Enter, I'll try to continue anyway,

./qcset: invalid configuration request type
[!] qcset did not found the QuickCam camera
WARNING: If you press Enter, I'll try to continue anyway
Nombre est importante.
Normalement, il devrait être 81, il ya donc des problèmes à venir.
AVERTISSEMENT: Si vous appuyez sur la touche Entrée, je vais essayer de continuer de toute façon, [/ citer]
[Citation]. / Qcset: invalide la configuration type de demande
[!] Qcset n'a pas trouvé la caméra QuickCam
AVERTISSEMENT: Si vous appuyez sur la touche Entrée, je vais essayer de continuer de toute façon,

nicolas@nicolas-desktop:~$ sudo rmmod quickcam
[sudo] password for nicolas:
nicolas@nicolas-desktop:~$ wget http://home.mag.cx/messenger/source/qc-usb-messenger-1.7.tar.gz
--22:36:37--  http://home.mag.cx/messenger/source/qc-usb-messenger-1.7.tar.gz
           => `qc-usb-messenger-1.7.tar.gz.4'
Résolution de home.mag.cx... 82.183.171.139
Connexion vers home.mag.cx|82.183.171.139|:80... connecté.
requête HTTP transmise, en attente de la réponse... 200 OK
Longueur: 168 467 (165K) [application/x-gzip]

100%[====================================>] 168 467      105.73K/s             

22:36:39 (105.21 KB/s) - Â« qc-usb-messenger-1.7.tar.gz.4 Â» sauvegardé [168467/168467]

nicolas@nicolas-desktop:~$ tar xzvf ./qc-usb-messenger-*.tar.gz
qc-usb-messenger-1.7/
qc-usb-messenger-1.7/show.c
qc-usb-messenger-1.7/README
qc-usb-messenger-1.7/qc-pb0100.c
qc-usb-messenger-1.7/README.qce
qc-usb-messenger-1.7/CREDITS
qc-usb-messenger-1.7/qc-hdcs.c
qc-usb-messenger-1.7/quickcam.sh
qc-usb-messenger-1.7/qcweb-info.txt
qc-usb-messenger-1.7/qc-vv6450.c
qc-usb-messenger-1.7/qc-memory.c
qc-usb-messenger-1.7/quickcam.h
qc-usb-messenger-1.7/_README_MESSENGER
qc-usb-messenger-1.7/TODO
qc-usb-messenger-1.7/APPLICATIONS
qc-usb-messenger-1.7/testquickcam/
qc-usb-messenger-1.7/testquickcam/testquickcam.c
qc-usb-messenger-1.7/testquickcam/convert_to_gif.sh
qc-usb-messenger-1.7/testquickcam/CVS/
qc-usb-messenger-1.7/testquickcam/CVS/Entries
qc-usb-messenger-1.7/testquickcam/CVS/Root
qc-usb-messenger-1.7/testquickcam/CVS/Repository
qc-usb-messenger-1.7/testquickcam/Makefile
qc-usb-messenger-1.7/testquickcam/testquickcam.h
qc-usb-messenger-1.7/linux-2.6.7-quickcam.patch
qc-usb-messenger-1.7/videodevfix.h
qc-usb-messenger-1.7/linux-2.6.8.1-quickcam.patch
qc-usb-messenger-1.7/print_exposure.sh
qc-usb-messenger-1.7/FAQ
qc-usb-messenger-1.7/debug.sh
qc-usb-messenger-1.7/Makefile
qc-usb-messenger-1.7/freeshm.sh
qc-usb-messenger-1.7/_CHANGES_MESSENGER
qc-usb-messenger-1.7/qc-vv6410.c
qc-usb-messenger-1.7/qcset.c
qc-usb-messenger-1.7/videodev2.h
qc-usb-messenger-1.7/qc-memory.h
qc-usb-messenger-1.7/linux-2.4.20-quickcam.patch
qc-usb-messenger-1.7/qc-driver.c
qc-usb-messenger-1.7/qc-mjpeg.c
qc-usb-messenger-1.7/QCM
qc-usb-messenger-1.7/qc-formats.c
qc-usb-messenger-1.7/COPYING
qc-usb-messenger-1.7/input_read.c
nicolas@nicolas-desktop:~$ cd ./qc-usb-messenger-*
nicolas@nicolas-desktop:~/qc-usb-messenger-1.7$ sudo ./quickcam.sh
-=- Logitech QuickCam USB camera driver installer -=-
Hello! I am the (hopefully) easy-to-use, fully automated
qc-usb driver installation script.
At the moment, this is experimental, and if it doesn't work,
don't hesitate to quit this with Ctrl+C and install the
driver manually.

The driver is provided in source code form, so it has to be
compiled. This should happen automatically, but it does mean
that there are some steps required before installation.

You also need to know "root" user password to test and
install the driver.

Basically you need only to keep hitting Enter whenever you
see this prompt: --->. Sometimes you're asked root password.
Pay special attention to lines beginning with [!].
It means that some trouble has been detected.

To most important location is the path to your kernel source
or headers. This can be guessed, but you can specify it by
giving it as an argument to this script like this:
        ./quickcam.sh LINUX_DIR=/usr/src/linux

If you haven't done it yet, now it would be a good moment to
take a look at file README.

Next I'm going to check if you have some important programs installed
and if they and the kernel are of suitable version.
Press Ctrl+C to quit, Enter to continue ---> 

./quickcam.sh
/usr/bin/whoami
/bin/su
/bin/ls
/bin/cat
/usr/bin/gcc
/usr/bin/gcc
/usr/bin/make
/bin/grep
/bin/egrep
/usr/bin/awk
/bin/sed
/usr/bin/tail
/usr/bin/head
/usr/bin/install
/usr/bin/ld
/bin/uname
/usr/bin/tr
/usr/bin/xawtv
/usr/bin/xdpyinfo
/bin/dmesg
/usr/bin/wc
gcc version: version gcc 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)
gcc version: version gcc 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)
Make version: GNU Make 3.81
Linker version: GNU ld (GNU Binutils for Ubuntu) 2.18
Kernel compiler: gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)
[!] Kernel compiler and gcc seem to be different versions.
Instead, they should be the same. If you have many compilers
installed, you can specify the correct one with command (in bash)
        export CC=kgcc
before trying to install the driver. Replace kgcc with the command
required for compiling kernels (kgcc is often used in Red Hat systems).
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue ---> 

Looking for more necessary programs...
Found program /sbin/depmod
Found program /sbin/insmod
Found program /sbin/rmmod
Found program /sbin/modprobe
Found program /bin/mount
Found program /usr/sbin/lsusb
depmod version: module-init-tools 3.3-pre2
insmod version: module-init-tools version 3.3-pre2
rmmod version: module-init-tools version 3.3-pre2
modprobe version: module-init-tools version 3.3-pre2
Checking whether we're root... root
[!] Running script as root.
You shouldn't run this script as root. It should work,
but is unsafe. Please run this as an ordinary user.
When root access is really needed, you will be prompted
for the root password.
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue ---> 

Checking for driver source code...
Checking for write permission...

Previous round done. Now checking if you have kernel source installed.
Press Ctrl+C to quit, Enter to continue ---> 

Kernel source directory: /lib/modules/2.6.22-14-generic/build
Detected kernel version is 2.6.x.
Kernel version name: 2.6.22-14-generic
Kernel source version code: 132630
Driver file name: quickcam.ko
Module install directory: /lib/modules/2.6.22-14-generic
Driver source directory (PWD):         /home/nicolas/qc-usb-messenger-1.7
Kernel source directory (LINUX_DIR):   /lib/modules/2.6.22-14-generic/build
Module install directory (MODULE_DIR): /lib/modules/2.6.22-14-generic
Utility install directory (PREFIX):    /usr/local
User options (USER_OPT):               -DHAVE_UTSRELEASE_H=1
Driver file name (use with insmod):    quickcam.ko
Kernel version code:                   132630

The QuickCam driver requires other drivers from kernel.
I'll now check if those seem to be loaded.
Press Ctrl+C to quit, Enter to continue ---> 

Modules loaded into the kernel:
nls_iso8859_1 nls_cp437 vfat fat isofs udf ipv6 af_packet binfmt_misc fglrx rfcomm l2cap ppdev acpi_cpufreq cpufreq_stats cpufreq_ondemand freq_table cpufreq_conservative cpufreq_powersave cpufreq_userspace ac container button dock video sbs battery sbp2 lp arc4 ecb blkcipher rc80211_simple rt2500usb rt2x00usb rt2x00lib rfkill snd_usb_audio snd_pcm_oss mac80211 cfg80211 saa7134_alsa lirc_atiusb lirc_dev snd_mixer_oss hci_usb snd_hda_intel input_polldev crc_itu_t ati_remote bluetooth snd_seq_dummy saa7134 usbhid hid snd_seq_oss snd_pcm snd_usb_lib snd_seq_midi snd_rawmidi snd_hwdep quickcam_messenger usbvideo snd_seq_midi_event snd_seq snd_timer snd_seq_device parport_pc parport cdc_ether usbnet serio_raw psmouse video_buf compat_ioctl32 ir_kbd_i2c i2c_core ir_common videodev v4l2_common v4l1_compat pcspkr iTCO_wdt iTCO_vendor_support snd soundcore snd_page_alloc shpchp pci_hotplug intel_agp agpgart evdev usb_storage ide_core ext3 jbd mbcache libusual sg sd_mod sr_mod cdrom ata_piix via_rhine mii floppy ata_generic libata scsi_mod ohci1394 ieee1394 ehci_hcd uhci_hcd usbcore thermal processor fan fuse apparmor commoncap 
[!] The QuickCam driver is already loaded!
You should first remove the (old?) module by issuing
        rmmod mod_quickcam || rmmod quickcam
as root, otherwise I will fail to install the new module.
I will now try to unload it for you automatically,
if you just give me the root password (Ctrl+D to cancel):
=== Entering root mode ===
Trying to unload QuickCam driver...
ERROR: Module quickcam does not exist in /proc/modules
ERROR: Module mod_quickcam does not exist in /proc/modules
=== Leaving root mode ===
[!] QuickCam driver failed to unload.
It is not possible to install new version before unloading
the older version. Check that no application is using the
camera, using e.g.
        lsof /dev/video0
or whatever is the camera device file.
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue ---> 


Next round: let's see if you have a supported QuickCam.
Please plug in your USB camera before continuing.
Press Ctrl+C to quit, Enter to continue ---> 

I can find the following probably compatible devices:
Bus 001 Device 002: ID 046d:08f0 Logitech, Inc. QuickCam Messenger

Another round done. Let's now compile the driver, it takes a while.
This step will also clear old unnecessary files from the directory.
Press Ctrl+C to quit, Enter to continue ---> 

rm -f *.o qcset input_read show *~ .\#* .*.cmd *.mod.c *.ko
rm -rf .tmp_versions
cd testquickcam ; make clean
make[1]: entrant dans le répertoire Â« /home/nicolas/qc-usb-messenger-1.7/testquickcam Â»
rm -f testquickcam *~ pic.ppm pic.gif
make[1]: quittant le répertoire Â« /home/nicolas/qc-usb-messenger-1.7/testquickcam Â»
make -C "/lib/modules/2.6.22-14-generic/build" SUBDIRS="/home/nicolas/qc-usb-messenger-1.7" modules V=1 USER_OPT="-DHAVE_UTSRELEASE_H=1"
make[1]: entrant dans le répertoire Â« /usr/src/linux-headers-2.6.22-14-generic Â»
test -e include/linux/autoconf.h -a -e include/config/auto.conf || (           \
        echo;                                                           \
        echo "  ERROR: Kernel configuration is invalid.";               \
        echo "         include/linux/autoconf.h or include/config/auto.conf are missing.";      \
        echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";  \
        echo;                                                           \
        /bin/false)
mkdir -p /home/nicolas/qc-usb-messenger-1.7/.tmp_versions
rm -f /home/nicolas/qc-usb-messenger-1.7/.tmp_versions/*
make -f scripts/Makefile.build obj=/home/nicolas/qc-usb-messenger-1.7
  gcc -m32 -Wp,-MD,/home/nicolas/qc-usb-messenger-1.7/.qc-driver.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args   -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DNOKERNEL -DHAVE_UTSRELEASE_H=1  -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(qc_driver)"  -D"KBUILD_MODNAME=KBUILD_STR(quickcam)" -c -o /home/nicolas/qc-usb-messenger-1.7/.tmp_qc-driver.o /home/nicolas/qc-usb-messenger-1.7/qc-driver.c
/home/nicolas/qc-usb-messenger-1.7/qc-driver.c: In function Â«qc_int_init":
/home/nicolas/qc-usb-messenger-1.7/qc-driver.c:850: attention : passing argument 6 of Â«usb_fill_int_urb" from incompatible pointer type
/home/nicolas/qc-usb-messenger-1.7/qc-driver.c: In function Â«qc_isoc_start":
/home/nicolas/qc-usb-messenger-1.7/qc-driver.c:2209: attention : assignment from incompatible pointer type
  gcc -m32 -Wp,-MD,/home/nicolas/qc-usb-messenger-1.7/.qc-vv6450.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args   -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DNOKERNEL -DHAVE_UTSRELEASE_H=1  -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(qc_vv6450)"  -D"KBUILD_MODNAME=KBUILD_STR(quickcam)" -c -o /home/nicolas/qc-usb-messenger-1.7/.tmp_qc-vv6450.o /home/nicolas/qc-usb-messenger-1.7/qc-vv6450.c
  gcc -m32 -Wp,-MD,/home/nicolas/qc-usb-messenger-1.7/.qc-formats.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args   -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DNOKERNEL -DHAVE_UTSRELEASE_H=1  -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(qc_formats)"  -D"KBUILD_MODNAME=KBUILD_STR(quickcam)" -c -o /home/nicolas/qc-usb-messenger-1.7/.tmp_qc-formats.o /home/nicolas/qc-usb-messenger-1.7/qc-formats.c
  gcc -m32 -Wp,-MD,/home/nicolas/qc-usb-messenger-1.7/.qc-memory.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args   -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DNOKERNEL -DHAVE_UTSRELEASE_H=1  -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(qc_memory)"  -D"KBUILD_MODNAME=KBUILD_STR(quickcam)" -c -o /home/nicolas/qc-usb-messenger-1.7/.tmp_qc-memory.o /home/nicolas/qc-usb-messenger-1.7/qc-memory.c
  ld -m elf_i386 -m elf_i386  -r -o /home/nicolas/qc-usb-messenger-1.7/quickcam.o /home/nicolas/qc-usb-messenger-1.7/qc-driver.o /home/nicolas/qc-usb-messenger-1.7/qc-vv6450.o /home/nicolas/qc-usb-messenger-1.7/qc-formats.o /home/nicolas/qc-usb-messenger-1.7/qc-memory.o
  Building modules, stage 2.
make -f /usr/src/linux-headers-2.6.22-14-generic/scripts/Makefile.modpost
  scripts/mod/modpost -m -a -i /usr/src/linux-headers-2.6.22-14-generic/Module.symvers -I /home/nicolas/qc-usb-messenger-1.7/Module.symvers -o /home/nicolas/qc-usb-messenger-1.7/Module.symvers -w
  gcc -m32 -Wp,-MD,/home/nicolas/qc-usb-messenger-1.7/.quickcam.mod.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args   -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign    -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(quickcam.mod)"  -D"KBUILD_MODNAME=KBUILD_STR(quickcam)" -DMODULE -c -o /home/nicolas/qc-usb-messenger-1.7/quickcam.mod.o /home/nicolas/qc-usb-messenger-1.7/quickcam.mod.c
  ld -m elf_i386 -m elf_i386 -r -o /home/nicolas/qc-usb-messenger-1.7/quickcam.ko /home/nicolas/qc-usb-messenger-1.7/quickcam.o /home/nicolas/qc-usb-messenger-1.7/quickcam.mod.o
make[1]: quittant le répertoire Â« /usr/src/linux-headers-2.6.22-14-generic Â»
gcc -Wall -O2 -s qcset.c -o qcset -lm
qcset.c: In function Â«pnm_open":
qcset.c:383: attention : pointer targets in passing argument 1 of Â«fopen" differ in signedness
qcset.c: In function Â«main":
qcset.c:642: attention : pointer targets in passing argument 1 of Â«pnm_open" differ in signedness
gcc -Wall -O2 -s input_read.c -o input_read
-rw-r--r-- 1 root root 723368 2007-11-23 22:43 quickcam.ko

Now everything should be well and the driver compiled.
Let's then try actually loading the fresh driver and testing
if it works.
Press Ctrl+C to quit, Enter to continue ---> 

To load the driver, I need to know the root password.
=== Entering root mode ===

I will now try to enable the SysRq key.
If your computer crashes, you can try pressing:
        Alt + SysRq + S: Emergency Sync (write everything on hard disk)
        Alt + SysRq + U: Unmount all harddisks
        Alt + SysRq + B: Reboot system immediately
Press Ctrl+C to quit, Enter to continue ---> 

Now I finally will try to load the module.
If you're unlucky, your computer might crash right now!!!!
Consider long if you really want to continue.
Press Ctrl+C to quit, Enter to continue ---> 

You decided to do it, here we go...
=== Leaving root mode ===
The driver detected the following supported cameras:
[  644.773660] quickcam [19.524116]: ----------LOADING QUICKCAM MODULE------------
[  644.773669] quickcam [19.524127]: struct quickcam size: 4464
[  644.774539] usbcore: registered new interface driver quickcam
usr/bin/realpath: need at least one filename
Usage:
 usr/bin/realpath [-s|--strip] [-z|--zero] filename ...
 usr/bin/realpath -h|--help
 usr/bin/realpath -v|--version
I will be using , if there are more cameras I'll not test them.
Press Ctrl+C to quit, Enter to continue ---> 

Testing if  is correct.
ls: : Aucun fichier ou répertoire de ce type
[!] You don't have read/write access to .
On many distributions, you should add yourself into the
"video" group by giving command
        adduser root video
and then log in again to be able to access the video.
A quick alternative is just to do
        chmod a+rw 
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue ---> 

ls: : Aucun fichier ou répertoire de ce type
ls: : Aucun fichier ou répertoire de ce type
[!]  major number is .
Usually it should be 81, so there are problems ahead.
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue ---> 


Right now driver is loaded and should be ready to run.
Let's test if user applications can see it, starting with qcset.
Press Ctrl+C to quit, Enter to continue ---> 

./qcset: invalid configuration request type
[!] qcset did not found the QuickCam camera
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue ---> 

If you like, you can quit now and start using the camera -
you have good chances that it works, if no problems were detected.
If you have X Window System running and xawtv installed,
I can now run it automatically for you.
You will then also have opportunity to install the driver permanently.
Press Ctrl+C to quit, Enter to continue ---> 

Launching xawtv (press q on xawtv window to quit it)...
If the image is not sharp, try focusing it by turning the
wheel around the camera lens.
        xawtv -noscale -noxv -c ""
This is xawtv-3.95.dfsg.1, running on Linux/i686 (2.6.22-14-generic)
WARNING: Your X-Server has no DGA support.
/dev/video0 [v4l]: no overlay support
v4l-conf had some trouble, trying to continue anyway
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct
ioctl: VIDIOCMCAPTURE(frame=0;height=120;width=160;format=5): Argument invalide
v4l: timeout (got SIGALRM), hardware/driver problems?
ioctl: VIDIOCSYNC(int=0): Appel système interrompu
ioctl: VIDIOCMCAPTURE(frame=0;height=120;width=160;format=1): Argument invalide
ioctl: VIDIOCMCAPTURE(frame=0;height=120;width=160;format=7): Argument invalide
ioctl: VIDIOCMCAPTURE(frame=0;height=120;width=160;format=13): Argument invalide
ioctl: VIDIOCMCAPTURE(frame=0;height=120;width=160;format=15): Argument invalide
no way to get: 384x288 32 bit TrueColor (LE: bgr-)

Well, did it work, did you get a picture?
If you did, you might now want to install the driver
permanently. Just proceed to do that...
Press Ctrl+C to quit, Enter to continue --->

sheep · Le 24/11/2007, à 00:56

bon j'ai peut-être une solution:

va dans le dossier oà¹ on a decompresser l'archive:

 cd ./qc-usb-messenger-*

puis:

make all

puis:

sudo make install

puis:

modprobe videodev

et enfin

 sudo modprobe quickcam

Postes en retour les eventuels messages d'erreurs sinon essaye en lançant camorama ou xawtv.

Poste aussi la fin du fichier /var/log/syslog (juste les dernieres minutes, qui devraient contenir des infos a propos de quickcam)

Dernière modification par sheep (Le 24/11/2007, à 00:59)

nicopathe · Le 24/11/2007, à 00:58

merci beaucoup!

j'essaye.

nicopathe · Le 24/11/2007, à 01:03

sheep a écrit :

bon j'ai peut-être une solution:
va dans le dossier oà¹ on a decompresser l'archive:
 cd ./qc-usb-messenger-*

oups... mon qc-usb-messenger-1.7.tar.gz est dans /home/nicolas/qc-usb-messenger-1.7.tar.gz

je le tape comment?
cd ./qc-usb-messenger-* ?
ou cd ./home/nicolas.qc-usb-messenger-*?

sheep · Le 24/11/2007, à 01:08

tu tapes comme je l'ai écrit, vu que tu pars de ton /home quand tu ouvres le terminal

il faut bien que tu aies décompressé l'archive avant, avec la commande:

tar xzvf ./qc-usb-messenger-*.tar.gz

Dernière modification par sheep (Le 24/11/2007, à 01:08)

nicopathe · Le 24/11/2007, à 01:19

je te poste ce que j'ai fait:

nicolas@nicolas-desktop:~$ tar xzvf ./qc-usb-messenger-*.tar.gz
qc-usb-messenger-1.7/
qc-usb-messenger-1.7/show.c
qc-usb-messenger-1.7/README
qc-usb-messenger-1.7/qc-pb0100.c
qc-usb-messenger-1.7/README.qce
qc-usb-messenger-1.7/CREDITS
qc-usb-messenger-1.7/qc-hdcs.c
qc-usb-messenger-1.7/quickcam.sh
qc-usb-messenger-1.7/qcweb-info.txt
qc-usb-messenger-1.7/qc-vv6450.c
qc-usb-messenger-1.7/qc-memory.c
qc-usb-messenger-1.7/quickcam.h
qc-usb-messenger-1.7/_README_MESSENGER
qc-usb-messenger-1.7/TODO
qc-usb-messenger-1.7/APPLICATIONS
qc-usb-messenger-1.7/testquickcam/
qc-usb-messenger-1.7/testquickcam/testquickcam.c
qc-usb-messenger-1.7/testquickcam/convert_to_gif.sh
qc-usb-messenger-1.7/testquickcam/CVS/
qc-usb-messenger-1.7/testquickcam/CVS/Entries
qc-usb-messenger-1.7/testquickcam/CVS/Root
qc-usb-messenger-1.7/testquickcam/CVS/Repository
qc-usb-messenger-1.7/testquickcam/Makefile
qc-usb-messenger-1.7/testquickcam/testquickcam.h
qc-usb-messenger-1.7/linux-2.6.7-quickcam.patch
qc-usb-messenger-1.7/videodevfix.h
qc-usb-messenger-1.7/linux-2.6.8.1-quickcam.patch
qc-usb-messenger-1.7/print_exposure.sh
qc-usb-messenger-1.7/FAQ
qc-usb-messenger-1.7/debug.sh
qc-usb-messenger-1.7/Makefile
qc-usb-messenger-1.7/freeshm.sh
qc-usb-messenger-1.7/_CHANGES_MESSENGER
qc-usb-messenger-1.7/qc-vv6410.c
qc-usb-messenger-1.7/qcset.c
qc-usb-messenger-1.7/videodev2.h
qc-usb-messenger-1.7/qc-memory.h
qc-usb-messenger-1.7/linux-2.4.20-quickcam.patch
qc-usb-messenger-1.7/qc-driver.c
qc-usb-messenger-1.7/qc-mjpeg.c
qc-usb-messenger-1.7/QCM
qc-usb-messenger-1.7/qc-formats.c
qc-usb-messenger-1.7/COPYING
qc-usb-messenger-1.7/input_read.c
nicolas@nicolas-desktop:~$ cd ./qc-usb-messenger-*
nicolas@nicolas-desktop:~/qc-usb-messenger-1.7$ make all
make: Rien à faire pour « all ».
nicolas@nicolas-desktop:~/qc-usb-messenger-1.7$ sudo make install
[sudo] password for nicolas:
/usr/bin/install -c -D -m 644 quickcam.ko /lib/modules/2.6.22-14-generic/misc/quickcam.ko
/usr/bin/install -c -D -m 755 qcset /usr/local/bin/qcset
/sbin/depmod -a
nicolas@nicolas-desktop:~/qc-usb-messenger-1.7$ modprobe videodev
nicolas@nicolas-desktop:~/qc-usb-messenger-1.7$ sudo modprobe quickcam
nicolas@nicolas-desktop:~/qc-usb-messenger-1.7$

pas specialement de message d'erreur sauf peut etre le "make: Rien à faire pour « all »."
pas mieux en camorama ou xaw tv ni vlc.
je relance une instal comme sur le tuto?

sheep · Le 24/11/2007, à 01:21

non tu relances pas une install, par contre tu me colles les dernieres minutes du fichier /var/log/syslog
le dix derniers en gros (y a quickcam dedans)

Dernière modification par sheep (Le 24/11/2007, à 01:22)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 23/11/2007, à 19:00

webcam logitech_messenger, non resolu :-/ [Résolu]

#2 Le 23/11/2007, à 19:51

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#3 Le 23/11/2007, à 20:16

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#4 Le 23/11/2007, à 20:19

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#5 Le 23/11/2007, à 20:28

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#6 Le 23/11/2007, à 20:30

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#7 Le 23/11/2007, à 20:33

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#8 Le 23/11/2007, à 20:42

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#9 Le 23/11/2007, à 20:55

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#10 Le 23/11/2007, à 20:57

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#11 Le 23/11/2007, à 21:03

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#12 Le 23/11/2007, à 21:06

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#13 Le 23/11/2007, à 21:09

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#14 Le 23/11/2007, à 21:10

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#15 Le 23/11/2007, à 21:15

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#16 Le 23/11/2007, à 21:17

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#17 Le 23/11/2007, à 23:06

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#18 Le 23/11/2007, à 23:29

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#19 Le 23/11/2007, à 23:55

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#20 Le 24/11/2007, à 00:56

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#21 Le 24/11/2007, à 00:58

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#22 Le 24/11/2007, à 01:03

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#23 Le 24/11/2007, à 01:08

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#24 Le 24/11/2007, à 01:19

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

#25 Le 24/11/2007, à 01:21

Re : webcam logitech_messenger, non resolu :-/ [Résolu]

Pied de page des forums