[RESOLU]Xubuntu Cannot find a backlight controller

Compte anonymisé · Le 04/10/2015, à 09:10

Bonjour,
Je viens tout juste d'installer xubuntu 14.04.3 en supprimant windows 8.1 pourtant a chaque demarrage(environ 5 sec) il apparait l'erreur suivante écrit en blanc sur un fond noir(ce qui me fait penser à la console ctrl + alt + F1 ) :

drm: radeon_acpi_init Error: Cannot find a backlight controller

Malgrés cela le demarrage se déroule correctement mais je voudrais quand même résoudre ce probléme.

Merci de votre aide pour erradiquer ce message d'erreur ma foi, genant.

Dernière modification par Compte anonymisé (Le 07/10/2015, à 15:35)

nam1962 · Le 04/10/2015, à 09:14

Essaie en ajoutant nomodeset au démarrage : ./viewtopic.php?pid=3442570#p3442570

Dernière modification par nam1962 (Le 04/10/2015, à 09:14)

Compte anonymisé · Le 04/10/2015, à 10:30

Est-ce que ça signifie que grub est toujours actif au démarrage? parce qu'il ne le devrait pas. Aussi nomodeset implique une modification du boot ? (J'ai des antécédents avec la modification de boot )

Dernière modification par Compte anonymisé (Le 04/10/2015, à 10:41)

Compte anonymisé · Le 04/10/2015, à 11:05

Effectivement nomodeset peut être dangereux ! : " Unfortunately, on some cards this doesnt work properly and you end up with a black screen " . Source : http://ubuntuforums.org/showthread.php?t=1613132

Dernière modification par Compte anonymisé (Le 04/10/2015, à 11:06)

moko138 · Le 04/10/2015, à 11:29

Est-ce que ça signifie que grub est toujours actif au démarrage? parce qu'il ne le devrait pas.

grub est le démarreur du S.E. Il contient des réglages.
Certains, comme la durée d'affichage de son menu, sont sans objet après le démarrage,
d"autres portent sur le fonctionnement du système jusqu'à son extinction.
- - - -
Tour ou portable ?
Si portable, quel est le nom complet du modèle ?
Peux-tu donner ces quatre retours bien séparés

cat /etc/default/grub | grep LINUX_DEFAULT
dpkg -l xfce4-power-manager-plugins 
dpkg -l xbacklight
sudo lshw -C display

s'il te plaît ?

Compte anonymisé · Le 04/10/2015, à 11:56

Désolé, je me suis mal fait comprendre , j'ai installé auparavant xubuntu a coté de windows et alors il y avait le menu de grub pour choisir l'un ou l'autre. Ensuite j'ai installé seulement xubuntu .Oui, grub permet de charger un OS, mais c'est à cette fonctionnalité de menu que je faisais allusion.

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"

Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom            Version      Architecture Description
+++-==============-============-============-=================================
un  xfce4-power-ma <aucun>      <aucune>     (aucune description n'est disponi

dpkg-query: aucun paquet ne correspond à xbacklight

PCI (sysfs)

Nom du portable : Lenovo-G585

Dernière modification par Compte anonymisé (Le 04/10/2015, à 11:59)

nam1962 · Le 04/10/2015, à 12:38

Il serait mieux que tu donnes les retours complets, sinon on reste dans l'expectative...
...exemple chez moi :

 ~]$ cat /etc/default/grub | grep LINUX_DEFAULT
GRUB_CMDLINE_LINUX_DEFAULT="quiet modprobe.blacklist=radeon "
[moi@mon ordi ~]$

Pour nomodeset, c'est parfaitement réversible, essaie et annule si ça ne résous pas.

Compte anonymisé · Le 04/10/2015, à 13:06

:~$ cat /etc/default/grub | grep LINUX_DEFAULT
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
:~$

:~$ dpkg -l xfce4-power-manager-plugins 
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom            Version      Architecture Description
+++-==============-============-============-=================================
un  xfce4-power-ma <aucun>      <aucune>     (aucune description n'est disponi
:~$

:~$ dpkg -l xbacklight
dpkg-query: aucun paquet ne correspond à xbacklight
:~$

 :~$ sudo lshw -C display
[sudo] password for moi: 
  *-display               
       description: VGA compatible controller
       produit: Wrestler [Radeon HD 7310]
       fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
       identifiant matériel: 1
       information bus: pci@0000:00:01.0
       version: 00
       bits: 32 bits
       horloge: 33MHz
       fonctionnalités: pm pciexpress msi vga_controller bus_master cap_list rom
       configuration: driver=radeon latency=0
       ressources: irq:45 mémoire:e0000000-efffffff portE/S:3000(taille=256) mémoire:f0300000-f033ffff
:~$

Je prends en compte nomodeset, mais existe t-il une autre façon de proceder en session, en interface graphique ou ligne de commande ?

Dernière modification par Compte anonymisé (Le 04/10/2015, à 13:12)

moko138 · Le 05/10/2015, à 02:42

0) grub reste le démarreur, même s'il n'y a qu'un S.E.
Pour plus de détails, regarde : grub

1) Donne le retour complet de

sudo apt-get update

S'il y a un message d'erreur, ne va pas plus loin.

2) S'il n'y a aucun message d'erreur, donne aussi le retour de

sudo apt-get install  xfce4-power-manager-plugins xbacklight && sudo update-grub

3) Redémarre.

Compte anonymisé · Le 05/10/2015, à 08:42

1er retour = pas de messages d'erreur

:~$ sudo apt-get update
[sudo] password for moi: 
Ign http://extras.ubuntu.com trusty InRelease
Ign http://fr.archive.ubuntu.com trusty InRelease                              
Ign http://ppa.launchpad.net trusty InRelease                                  
Atteint http://extras.ubuntu.com trusty Release.gpg                            
Ign http://fr.archive.ubuntu.com trusty-updates InRelease                      
Atteint http://ppa.launchpad.net trusty Release.gpg                            
Atteint http://extras.ubuntu.com trusty Release                                
Ign http://fr.archive.ubuntu.com trusty-backports InRelease                    
Atteint http://ppa.launchpad.net trusty Release                                
Atteint http://fr.archive.ubuntu.com trusty Release.gpg                        
Réception de : 1 http://fr.archive.ubuntu.com trusty-updates Release.gpg [933 B]
Réception de : 2 http://fr.archive.ubuntu.com trusty-backports Release.gpg [933 B]
Atteint http://extras.ubuntu.com trusty/main Sources                           
Atteint http://fr.archive.ubuntu.com trusty Release                            
Atteint http://ppa.launchpad.net trusty/main amd64 Packages                    
Réception de : 3 http://fr.archive.ubuntu.com trusty-updates Release [63,5 kB] 
Atteint http://extras.ubuntu.com trusty/main amd64 Packages                    
Atteint http://ppa.launchpad.net trusty/main i386 Packages                     
Ign http://security.ubuntu.com trusty-security InRelease                       
Atteint http://extras.ubuntu.com trusty/main i386 Packages                     
Atteint http://ppa.launchpad.net trusty/main Translation-en                    
Atteint http://security.ubuntu.com trusty-security Release.gpg                 
Réception de : 4 http://fr.archive.ubuntu.com trusty-backports Release [63,5 kB]
Atteint http://security.ubuntu.com trusty-security Release                     
Atteint http://fr.archive.ubuntu.com trusty/main Sources                       
Atteint http://fr.archive.ubuntu.com trusty/restricted Sources                 
Atteint http://security.ubuntu.com trusty-security/main Sources                
Atteint http://fr.archive.ubuntu.com trusty/universe Sources                   
Atteint http://fr.archive.ubuntu.com trusty/multiverse Sources                 
Atteint http://security.ubuntu.com trusty-security/restricted Sources          
Atteint http://fr.archive.ubuntu.com trusty/main amd64 Packages                
Atteint http://fr.archive.ubuntu.com trusty/restricted amd64 Packages          
Atteint http://security.ubuntu.com trusty-security/universe Sources            
Atteint http://fr.archive.ubuntu.com trusty/universe amd64 Packages            
Atteint http://fr.archive.ubuntu.com trusty/multiverse amd64 Packages          
Atteint http://security.ubuntu.com trusty-security/multiverse Sources          
Ign http://extras.ubuntu.com trusty/main Translation-fr_FR                     
Atteint http://fr.archive.ubuntu.com trusty/main i386 Packages                 
Ign http://extras.ubuntu.com trusty/main Translation-fr                        
Atteint http://fr.archive.ubuntu.com trusty/restricted i386 Packages           
Ign http://extras.ubuntu.com trusty/main Translation-en                        
Atteint http://security.ubuntu.com trusty-security/main amd64 Packages         
Atteint http://fr.archive.ubuntu.com trusty/universe i386 Packages             
Atteint http://security.ubuntu.com trusty-security/restricted amd64 Packages   
Atteint http://fr.archive.ubuntu.com trusty/multiverse i386 Packages           
Atteint http://security.ubuntu.com trusty-security/universe amd64 Packages     
Atteint http://fr.archive.ubuntu.com trusty/main Translation-fr                
Atteint http://fr.archive.ubuntu.com trusty/main Translation-en                
Atteint http://security.ubuntu.com trusty-security/multiverse amd64 Packages   
Atteint http://fr.archive.ubuntu.com trusty/multiverse Translation-fr          
Atteint http://fr.archive.ubuntu.com trusty/multiverse Translation-en          
Atteint http://security.ubuntu.com trusty-security/main i386 Packages          
Atteint http://fr.archive.ubuntu.com trusty/restricted Translation-fr          
Atteint http://security.ubuntu.com trusty-security/restricted i386 Packages    
Atteint http://fr.archive.ubuntu.com trusty/restricted Translation-en          
Atteint http://security.ubuntu.com trusty-security/universe i386 Packages      
Atteint http://fr.archive.ubuntu.com trusty/universe Translation-fr
Atteint http://fr.archive.ubuntu.com trusty/universe Translation-en
Atteint http://security.ubuntu.com trusty-security/multiverse i386 Packages
Réception de : 5 http://fr.archive.ubuntu.com trusty-updates/main Sources [237 kB]
Atteint http://security.ubuntu.com trusty-security/main Translation-en         
Atteint http://security.ubuntu.com trusty-security/multiverse Translation-en   
Atteint http://security.ubuntu.com trusty-security/restricted Translation-en
Réception de : 6 http://fr.archive.ubuntu.com trusty-updates/restricted Sources [4 722 B]
Réception de : 7 http://fr.archive.ubuntu.com trusty-updates/universe Sources [139 kB]
Atteint http://security.ubuntu.com trusty-security/universe Translation-en     
Réception de : 8 http://fr.archive.ubuntu.com trusty-updates/multiverse Sources [5 144 B]
Réception de : 9 http://fr.archive.ubuntu.com trusty-updates/main amd64 Packages [627 kB]
Réception de : 10 http://fr.archive.ubuntu.com trusty-updates/restricted amd64 Packages [15,4 kB]
Réception de : 11 http://fr.archive.ubuntu.com trusty-updates/universe amd64 Packages [320 kB]
Réception de : 12 http://fr.archive.ubuntu.com trusty-updates/multiverse amd64 Packages [11,9 kB]
Réception de : 13 http://fr.archive.ubuntu.com trusty-updates/main i386 Packages [608 kB]
Réception de : 14 http://fr.archive.ubuntu.com trusty-updates/restricted i386 Packages [15,1 kB]
Réception de : 15 http://fr.archive.ubuntu.com trusty-updates/universe i386 Packages [320 kB]
Réception de : 16 http://fr.archive.ubuntu.com trusty-updates/multiverse i386 Packages [12,1 kB]
Atteint http://fr.archive.ubuntu.com trusty-updates/main Translation-en        
Atteint http://fr.archive.ubuntu.com trusty-updates/multiverse Translation-en  
Atteint http://fr.archive.ubuntu.com trusty-updates/restricted Translation-en  
Atteint http://fr.archive.ubuntu.com trusty-updates/universe Translation-en    
Réception de : 17 http://fr.archive.ubuntu.com trusty-backports/main Sources [5 860 B]
Réception de : 18 http://fr.archive.ubuntu.com trusty-backports/restricted Sources [28 B]
Réception de : 19 http://fr.archive.ubuntu.com trusty-backports/universe Sources [28,8 kB]
Réception de : 20 http://fr.archive.ubuntu.com trusty-backports/multiverse Sources [1 898 B]
Réception de : 21 http://fr.archive.ubuntu.com trusty-backports/main amd64 Packages [6 288 B]
Réception de : 22 http://fr.archive.ubuntu.com trusty-backports/restricted amd64 Packages [28 B]
Réception de : 23 http://fr.archive.ubuntu.com trusty-backports/universe amd64 Packages [32,8 kB]
Réception de : 24 http://fr.archive.ubuntu.com trusty-backports/multiverse amd64 Packages [1 571 B]
Réception de : 25 http://fr.archive.ubuntu.com trusty-backports/main i386 Packages [6 293 B]
Réception de : 26 http://fr.archive.ubuntu.com trusty-backports/restricted i386 Packages [28 B]
Réception de : 27 http://fr.archive.ubuntu.com trusty-backports/universe i386 Packages [32,8 kB]
Réception de : 28 http://fr.archive.ubuntu.com trusty-backports/multiverse i386 Packages [1 552 B]
Réception de : 29 http://fr.archive.ubuntu.com trusty-backports/main Translation-en [3 645 B]
Réception de : 30 http://fr.archive.ubuntu.com trusty-backports/multiverse Translation-en [1 215 B]
Réception de : 31 http://fr.archive.ubuntu.com trusty-backports/restricted Translation-en [14 B]
Réception de : 32 http://fr.archive.ubuntu.com trusty-backports/universe Translation-en [29,7 kB]
Ign http://fr.archive.ubuntu.com trusty/main Translation-fr_FR                 
Ign http://fr.archive.ubuntu.com trusty/multiverse Translation-fr_FR           
Ign http://fr.archive.ubuntu.com trusty/restricted Translation-fr_FR           
Ign http://fr.archive.ubuntu.com trusty/universe Translation-fr_FR             
2 597 ko réceptionnés en 13s (190 ko/s)                                        
Lecture des listes de paquets... Fait
:~$

2eme

:~$ sudo apt-get install  xfce4-power-manager-plugins xbacklight && sudo update-grub
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Les NOUVEAUX paquets suivants seront installés :
  xbacklight xfce4-power-manager-plugins
0 mis à jour, 2 nouvellement installés, 0 à enlever et 9 non mis à jour.
Il est nécessaire de prendre 26,5 ko dans les archives.
Après cette opération, 167 ko d'espace disque supplémentaires seront utilisés.
Réception de : 1 http://fr.archive.ubuntu.com/ubuntu/ trusty/universe xbacklight amd64 1.1.2-1 [8 488 B]
Réception de : 2 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/universe xfce4-power-manager-plugins amd64 1.2.0-3ubuntu4.1 [18,0 kB]
26,5 ko réceptionnés en 0s (57,1 ko/s)                 
Sélection du paquet xbacklight précédemment désélectionné.
(Lecture de la base de données... 189321 fichiers et répertoires déjà installés.)
Préparation du décompactage de .../xbacklight_1.1.2-1_amd64.deb ...
Décompactage de xbacklight (1.1.2-1) ...
Sélection du paquet xfce4-power-manager-plugins précédemment désélectionné.
Préparation du décompactage de .../xfce4-power-manager-plugins_1.2.0-3ubuntu4.1_amd64.deb ...
Décompactage de xfce4-power-manager-plugins (1.2.0-3ubuntu4.1) ...
Traitement déclenché pour  man-db (2.6.7.1-1ubuntu1) ...
Paramétrage de xbacklight (1.1.2-1) ...
Paramétrage de xfce4-power-manager-plugins (1.2.0-3ubuntu4.1) ...
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-3.13.0-65-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-65-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-24-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-24-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
fait
:~$

Je redemarre, mais j'ai toujours la même erreur.

Dernière modification par Compte anonymisé (Le 05/10/2015, à 08:54)

moko138 · Le 05/10/2015, à 09:27

En #1, infinite a écrit :

Je viens tout juste d'installer xubuntu 14.04.3

En #10, infinite a écrit :

Image Linux trouvée : /boot/vmlinuz-3.13.0-65-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-65-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-24-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-24-generic

Il me semble que tu as la 14.04.1, ce qui est très bien, sauf si ton pc est très récent.
Donne

lsb_release -d

----------
Puisque ce qui précède n'a pas suffi,
Éditer le fichier /etc/default/grub :

gksudo mousepad /etc/default/grub

À partir de 14.04, gksudo n'est plus installé par défaut. Donc si on obtient un message d'erreur relatif à gksudo, lancer :

sudo apt-get install gksu

et relancer la commande précédente.

Puis
commenter (pour la réversibilité, en mettant un # en début de ligne) la ligne

GRUB_CMDLINE_LINUX_DEFAULT=(...)

pour qu'elle devienne

# GRUB_CMDLINE_LINUX_DEFAULT=(...)

et en-dessous COLLER celle-ci avec ses guillemets :

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux acpi_backlight=vendor"

Enregistrer et fermer le fichier. Puis

sudo update-grub

Redémarrer.
Dire si tu as toujours le message d'erreur ou pas.

Si oui, Peux-tu sitôt arrivé sur le bureau, faire

dmesg > dmesg_$(date +%Y%m%d).txt

et coller ici, entre balises-code, le fichier ainsi produit dans ton /home ?
Merci !

Compte anonymisé · Le 05/10/2015, à 11:25

:~$ lsb_release -d
Description:	Ubuntu 14.04.3 LTS
:~$

----------------------

J'ai fais les mofifications+redemarage.

L'erreur apparait toujours, voici le fichier produit aprés :

.code { 
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-65-generic (buildd@lgw01-55) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #105-Ubuntu SMP Mon Sep 21 18:50:58 UTC 2015 (Ubuntu 3.13.0-65.105-generic 3.13.11-ckt26)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-65-generic root=UUID=09e4d198-e3b1-4ae0-a568-cb401837dbab ro quiet splash acpi_osi=Linux acpi_backlight=vendor vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d4c83fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d4c84000-0x00000000d5484fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d5485000-0x00000000d54bbfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d54bc000-0x00000000d68bbfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d68bc000-0x00000000df8befff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df8bf000-0x00000000dfabefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dfabf000-0x00000000dfbbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dfbbf000-0x00000000dfbfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dfbff000-0x00000000dfbfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dfc00000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000106ffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000107000000-0x000000011effffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 2181/Lenovo G585, BIOS 6CCN88WW(V8.01) 08/22/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x107000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 0DFBBC000 mask FFFFFF000 uncachable
[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000011f000000 aka 4592M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdfc00 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[    0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[    0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x106e00000-0x106ffffff]
[    0.000000]  [mem 0x106e00000-0x106ffffff] page 2M
[    0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x104000000-0x106dfffff]
[    0.000000]  [mem 0x104000000-0x106dfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x103ffffff]
[    0.000000]  [mem 0x100000000-0x103ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xd4c83fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xd4bfffff] page 2M
[    0.000000]  [mem 0xd4c00000-0xd4c83fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xd5485000-0xd54bbfff]
[    0.000000]  [mem 0xd5485000-0xd54bbfff] page 4k
[    0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xd68bc000-0xdf8befff]
[    0.000000]  [mem 0xd68bc000-0xd69fffff] page 4k
[    0.000000]  [mem 0xd6a00000-0xdf7fffff] page 2M
[    0.000000]  [mem 0xdf800000-0xdf8befff] page 4k
[    0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xdfbff000-0xdfbfffff]
[    0.000000]  [mem 0xdfbff000-0xdfbfffff] page 4k
[    0.000000] RAMDISK: [mem 0x35b4a000-0x36d9cfff]
[    0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 00000000dfbfe120 000084 (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 00000000dfbfb000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 00000000dfbeb000 00B92E (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 00000000dfb8c000 000040
[    0.000000] ACPI: SLIC 00000000dfbfd000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 00000000dfbfc000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 00000000dfbfa000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 00000000dfbf9000 000084 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 00000000dfbf8000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 00000000dfbf7000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 00000000dfbea000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 00000000dfbe8000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 00000000dfbe7000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 00000000dfbe6000 0003DE (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 00000000dfbe4000 0016E4 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000106ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x106ffffff]
[    0.000000]   NODE_DATA [mem 0x106ff7000-0x106ffbfff]
[    0.000000]  [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880102c00000-ffff8801065fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x106ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xd4c83fff]
[    0.000000]   node   0: [mem 0xd5485000-0xd54bbfff]
[    0.000000]   node   0: [mem 0xd68bc000-0xdf8befff]
[    0.000000]   node   0: [mem 0xdfbff000-0xdfbfffff]
[    0.000000]   node   0: [mem 0x100000000-0x106ffffff]
[    0.000000] On node 0 totalpages: 937053
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14131 pages used for memmap
[    0.000000]   DMA32 zone: 904383 pages, LIFO batch:31
[    0.000000]   Normal zone: 448 pages used for memmap
[    0.000000]   Normal zone: 28672 pages, LIFO batch:7
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd4c84000-0xd5484fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd54bc000-0xd68bbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf8bf000-0xdfabefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfabf000-0xdfbbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfbbf000-0xdfbfefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfc00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff880106c00000 s81536 r8192 d20864 u524288
[    0.000000] pcpu-alloc: s81536 r8192 d20864 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 922389
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-65-generic root=UUID=09e4d198-e3b1-4ae0-a568-cb401837dbab ro quiet splash acpi_osi=Linux acpi_backlight=vendor vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3586912K/3748212K available (7396K kernel code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 161300K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-3.
[    0.000000] NR_IRQS:16640 nr_irqs:712 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 15204352 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1397.401 MHz processor
[    0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 2794.80 BogoMIPS (lpj=5589604)
[    0.000015] pid_max: default: 32768 minimum: 301
[    0.000088] Security Framework initialized
[    0.000132] AppArmor: AppArmor initialized
[    0.000137] Yama: becoming mindful.
[    0.000919] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003887] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.005219] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.005240] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.005763] Initializing cgroup subsys memory
[    0.005784] Initializing cgroup subsys devices
[    0.005788] Initializing cgroup subsys freezer
[    0.005793] Initializing cgroup subsys blkio
[    0.005796] Initializing cgroup subsys perf_event
[    0.005802] Initializing cgroup subsys hugetlb
[    0.005851] tseg: 00dfc00000
[    0.005856] CPU: Physical Processor ID: 0
[    0.005859] CPU: Processor Core ID: 0
[    0.005863] mce: CPU supports 6 MCE banks
[    0.005882] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.005882] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.005882] tlb_flushall_shift: 5
[    0.006121] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[    0.009150] ACPI: Core revision 20131115
[    0.021969] ACPI: All ACPI Tables successfully acquired
[    0.026947] ftrace: allocating 28590 entries in 112 pages
[    0.058466] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.098176] smpboot: CPU0: AMD E1-1200 APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
[    0.203225] Performance Events: AMD PMU driver.
[    0.203235] ... version:                0
[    0.203239] ... bit width:              48
[    0.203241] ... generic registers:      4
[    0.203244] ... value mask:             0000ffffffffffff
[    0.203247] ... max period:             00007fffffffffff
[    0.203249] ... fixed-purpose events:   0
[    0.203252] ... event mask:             000000000000000f
[    0.207407] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.207633] x86: Booting SMP configuration:
[    0.207638] .... node  #0, CPUs:      #1
[    0.220875] x86: Booted up 1 node, 2 CPUs
[    0.220881] smpboot: Total of 2 processors activated (5589.60 BogoMIPS)
[    0.221886] devtmpfs: initialized
[    0.230073] EVM: security.selinux
[    0.230077] EVM: security.SMACK64
[    0.230080] EVM: security.ima
[    0.230082] EVM: security.capability
[    0.230233] PM: Registering ACPI NVS region [mem 0xdfabf000-0xdfbbefff] (1048576 bytes)
[    0.232574] pinctrl core: initialized pinctrl subsystem
[    0.232786] regulator-dummy: no parameters
[    0.232902] RTC time:  9:56:18, date: 10/05/15
[    0.233044] NET: Registered protocol family 16
[    0.233349] cpuidle: using governor ladder
[    0.233353] cpuidle: using governor menu
[    0.233631] ACPI: bus type PCI registered
[    0.233637] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.233856] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.233863] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.240727] PCI: Using configuration type 1 for base access
[    0.241070] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.241073] mtrr: probably your BIOS does not setup all CPUs.
[    0.241075] mtrr: corrected configuration.
[    0.243209] bio: create slab <bio-0> at 0
[    0.243982] ACPI: Added _OSI(Module Device)
[    0.243992] ACPI: Added _OSI(Processor Device)
[    0.243996] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.243999] ACPI: Added _OSI(Processor Aggregator Device)
[    0.244003] ACPI: Added _OSI(Linux)
[    0.250448] ACPI: Executed 1 blocks of module-level executable AML code
[    0.257094] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
[    0.260918] ACPI: Interpreter enabled
[    0.260937] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.260948] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.260978] ACPI: (supports S0 S3 S4 S5)
[    0.260982] ACPI: Using IOAPIC for interrupt routing
[    0.261392] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.261738] ACPI: No dock devices found.
[    0.293501] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.293520] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.293534] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.293829] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
[    0.293839] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.294351] PCI host bridge to bus 0000:00
[    0.294359] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.294364] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.294369] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.294374] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.294379] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.294383] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.294388] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.294392] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.294397] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.294401] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.294406] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.294410] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.294414] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.294419] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.294423] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.294427] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
[    0.294432] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
[    0.294436] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
[    0.294453] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[    0.294644] pci 0000:00:01.0: [1002:9809] type 00 class 0x030000
[    0.294663] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.294675] pci 0000:00:01.0: reg 0x14: [io  0x3000-0x30ff]
[    0.294687] pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff]
[    0.294755] pci 0000:00:01.0: supports D1 D2
[    0.295018] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
[    0.295050] pci 0000:00:10.0: reg 0x10: [mem 0xf0344000-0xf0345fff 64bit]
[    0.295191] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.295323] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.295408] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[    0.295437] pci 0000:00:11.0: reg 0x10: [io  0x3118-0x311f]
[    0.295453] pci 0000:00:11.0: reg 0x14: [io  0x3124-0x3127]
[    0.295468] pci 0000:00:11.0: reg 0x18: [io  0x3110-0x3117]
[    0.295483] pci 0000:00:11.0: reg 0x1c: [io  0x3120-0x3123]
[    0.295498] pci 0000:00:11.0: reg 0x20: [io  0x3100-0x310f]
[    0.295514] pci 0000:00:11.0: reg 0x24: [mem 0xf034a000-0xf034a7ff]
[    0.295789] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    0.295811] pci 0000:00:12.0: reg 0x10: [mem 0xf0349000-0xf0349fff]
[    0.295979] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.296122] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    0.296600] pci 0000:00:12.2: reg 0x10: [mem 0xf0348000-0xf03480ff]
[    0.299101] pci 0000:00:12.2: supports D1 D2
[    0.299106] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.299282] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[    0.299304] pci 0000:00:13.0: reg 0x10: [mem 0xf0347000-0xf0347fff]
[    0.299473] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.299621] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[    0.300050] pci 0000:00:13.2: reg 0x10: [mem 0xf0346000-0xf03460ff]
[    0.302545] pci 0000:00:13.2: supports D1 D2
[    0.302550] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.302717] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.303020] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.303053] pci 0000:00:14.2: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit]
[    0.303147] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.303318] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.303621] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[    0.303766] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.303913] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[    0.304026] pci 0000:00:15.0: supports D1 D2
[    0.304134] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.304244] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
[    0.304355] pci 0000:00:15.1: supports D1 D2
[    0.304466] pci 0000:00:15.1: System wakeup disabled by ACPI
[    0.304615] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[    0.304789] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[    0.304971] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[    0.305135] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[    0.305318] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[    0.305482] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[    0.305648] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[    0.305813] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[    0.306167] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[    0.306183] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.306188] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.306193] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.306197] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[    0.306202] pci 0000:00:14.4:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[    0.306207] pci 0000:00:14.4:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[    0.306211] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.306216] pci 0000:00:14.4:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.306220] pci 0000:00:14.4:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.306225] pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.306229] pci 0000:00:14.4:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.306234] pci 0000:00:14.4:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.306238] pci 0000:00:14.4:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[    0.306243] pci 0000:00:14.4:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[    0.306247] pci 0000:00:14.4:   bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[    0.306256] pci 0000:00:14.4:   bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
[    0.306261] pci 0000:00:14.4:   bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
[    0.306506] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[    0.306533] pci 0000:02:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.306575] pci 0000:02:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.306603] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.306710] pci 0000:02:00.0: supports D1 D2
[    0.306714] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.311555] pci 0000:00:15.0: PCI bridge to [bus 02-05]
[    0.311576] pci 0000:00:15.0:   bridge window [io  0x2000-0x2fff]
[    0.311585] pci 0000:00:15.0:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.311597] pci 0000:00:15.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.311897] pci 0000:06:00.0: [168c:002b] type 00 class 0x028000
[    0.311939] pci 0000:06:00.0: reg 0x10: [mem 0xf0100000-0xf010ffff 64bit]
[    0.312095] pci 0000:06:00.0: supports D1
[    0.312100] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[    0.319548] pci 0000:00:15.1: PCI bridge to [bus 06]
[    0.319572] pci 0000:00:15.1:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.324554] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.324857] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.325155] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.325425] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.325626] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.325729] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.325831] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.325933] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.326254] ACPI: Enabled 3 GPEs in block 00 to 1F
[    0.326272] ACPI: \_SB_.PCI0: notify handler is installed
[    0.326402] Found 1 acpi root devices
[    0.326494] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    0.327021] vgaarb: setting as boot device: PCI:0000:00:01.0
[    0.327031] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.327045] vgaarb: loaded
[    0.327048] vgaarb: bridge control possible 0000:00:01.0
[    0.327538] SCSI subsystem initialized
[    0.327743] libata version 3.00 loaded.
[    0.327802] ACPI: bus type USB registered
[    0.327858] usbcore: registered new interface driver usbfs
[    0.327881] usbcore: registered new interface driver hub
[    0.328209] usbcore: registered new device driver usb
[    0.328714] PCI: Using ACPI for IRQ routing
[    0.331563] PCI: pci_cache_line_size set to 64 bytes
[    0.331665] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[    0.331671] e820: reserve RAM buffer [mem 0xd4c84000-0xd7ffffff]
[    0.331675] e820: reserve RAM buffer [mem 0xd54bc000-0xd7ffffff]
[    0.331678] e820: reserve RAM buffer [mem 0xdf8bf000-0xdfffffff]
[    0.331682] e820: reserve RAM buffer [mem 0xdfc00000-0xdfffffff]
[    0.331686] e820: reserve RAM buffer [mem 0x107000000-0x107ffffff]
[    0.331929] NetLabel: Initializing
[    0.331932] NetLabel:  domain hash size = 128
[    0.331935] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.331969] NetLabel:  unlabeled traffic allowed by default
[    0.332375] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.332388] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.334552] Switched to clocksource hpet
[    0.346521] AppArmor: AppArmor Filesystem Enabled
[    0.346704] pnp: PnP ACPI init
[    0.346737] ACPI: bus type PNP registered
[    0.347062] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.347070] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.347079] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.347541] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.347654] pnp 00:02: [dma 4]
[    0.347706] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.347840] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.348023] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.348084] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.348223] pnp 00:06: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[    0.348380] pnp 00:07: Plug and Play ACPI device, IDs ETD0613 ETD0001 PNP0f13 (active)
[    0.348560] system 00:08: [io  0x0400-0x04cf] could not be reserved
[    0.348567] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.348572] system 00:08: [io  0x04d6] has been reserved
[    0.348577] system 00:08: [io  0x0680-0x06ff] has been reserved
[    0.348582] system 00:08: [io  0x077a] has been reserved
[    0.348587] system 00:08: [io  0x0c00-0x0c01] has been reserved
[    0.348592] system 00:08: [io  0x0c14] has been reserved
[    0.348597] system 00:08: [io  0x0c50-0x0c52] has been reserved
[    0.348601] system 00:08: [io  0x0c6c] has been reserved
[    0.348606] system 00:08: [io  0x0c6f] has been reserved
[    0.348611] system 00:08: [io  0x0cd0-0x0cdb] has been reserved
[    0.348616] system 00:08: [io  0x0840-0x0847] has been reserved
[    0.348624] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.348803] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.348811] system 00:09: [mem 0xffc00000-0xffffffff] has been reserved
[    0.348817] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.351806] pnp: PnP ACPI: found 10 devices
[    0.351817] ACPI: bus type PNP unregistered
[    0.364542] pci 0000:00:14.4: PCI bridge to [bus 01]
[    0.364570] pci 0000:00:15.0: PCI bridge to [bus 02-05]
[    0.364577] pci 0000:00:15.0:   bridge window [io  0x2000-0x2fff]
[    0.364588] pci 0000:00:15.0:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.364597] pci 0000:00:15.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.364608] pci 0000:00:15.1: PCI bridge to [bus 06]
[    0.364617] pci 0000:00:15.1:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.364633] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.364637] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.364642] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.364647] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.364651] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.364656] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.364660] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[    0.364665] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.364669] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.364674] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[    0.364678] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.364682] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.364687] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.364691] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[    0.364696] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff]
[    0.364700] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
[    0.364705] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[    0.364710] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.364715] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.364719] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.364724] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.364728] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.364732] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.364737] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
[    0.364742] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.364746] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.364751] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff]
[    0.364755] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.364759] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.364764] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.364768] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff]
[    0.364773] pci_bus 0000:01: resource 18 [mem 0xe0000000-0xf7ffffff]
[    0.364777] pci_bus 0000:01: resource 19 [mem 0xfc000000-0xfed3ffff]
[    0.364782] pci_bus 0000:01: resource 20 [mem 0xfed45000-0xffffffff]
[    0.364786] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.364791] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff]
[    0.364796] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.364801] pci_bus 0000:06: resource 1 [mem 0xf0100000-0xf01fffff]
[    0.364876] NET: Registered protocol family 2
[    0.365403] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.365636] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.365926] TCP: Hash tables configured (established 32768 bind 32768)
[    0.366033] TCP: reno registered
[    0.366066] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.366124] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.366352] NET: Registered protocol family 1
[    0.366395] pci 0000:00:01.0: Video device with shadowed ROM
[    0.547311] PCI: CLS 64 bytes, default 64
[    0.547459] Trying to unpack rootfs image as initramfs...
[    1.269094] Freeing initrd memory: 18764K (ffff880035b4a000 - ffff880036d9d000)
[    1.269107] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.269113] software IO TLB [mem 0xdb8bf000-0xdf8bf000] (64MB) mapped at [ffff8800db8bf000-ffff8800df8befff]
[    1.269349] Simple Boot Flag at 0x44 set to 0x1
[    1.269512] LVT offset 0 assigned for vector 0x400
[    1.269670] perf: AMD IBS detected (0x000000ff)
[    1.269892] microcode: CPU0: patch_level=0x0500010d
[    1.269908] microcode: CPU1: patch_level=0x0500010d
[    1.270225] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.270236] Scanning for low memory corruption every 60 seconds
[    1.271027] Initialise system trusted keyring
[    1.271139] audit: initializing netlink socket (disabled)
[    1.271165] type=2000 audit(1444038978.152:1): initialized
[    1.333072] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.336648] zbud: loaded
[    1.337345] VFS: Disk quotas dquot_6.5.2
[    1.337484] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.338997] fuse init (API version 7.22)
[    1.339279] msgmni has been set to 7042
[    1.339437] Key type big_key registered
[    1.340502] Key type asymmetric registered
[    1.340512] Asymmetric key parser 'x509' registered
[    1.340637] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.340771] io scheduler noop registered
[    1.340776] io scheduler deadline registered (default)
[    1.340841] io scheduler cfq registered
[    1.341690] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.341724] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.341826] vesafb: mode is 1366x768x32, linelength=5632, pages=0
[    1.341830] vesafb: scrolling: redraw
[    1.341835] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.342646] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004780000, using 4224k, total 4224k
[    1.350811] Console: switching to colour frame buffer device 170x48
[    1.358460] fb0: VESA VGA frame buffer device
[    1.358522] ipmi message handler version 39.2
[    1.391465] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.407577] ACPI: AC Adapter [ACAD] (on-line)
[    1.408156] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.408166] ACPI: Power Button [PWRB]
[    1.411739] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    1.411753] ACPI: Sleep Button [SLPB]
[    1.415573] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    1.416084] ACPI: Lid Switch [LID]
[    1.416265] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.416275] ACPI: Power Button [PWRF]
[    1.423768] ACPI: acpi_idle registered with cpuidle
[    1.427394] GHES: HEST is not enabled!
[    1.427847] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.435608] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.435612] Linux agpgart interface v0.103
[    1.435635] ACPI: Battery Slot [BAT1] (battery absent)
[    1.440944] brd: module loaded
[    1.443668] loop: module loaded
[    1.444552] libphy: Fixed MDIO Bus: probed
[    1.444756] tun: Universal TUN/TAP device driver, 1.6
[    1.444760] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.445008] PPP generic driver version 2.4.2
[    1.445193] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.445211] ehci-pci: EHCI PCI platform driver
[    1.445567] QUIRK: Enable AMD PLL fix
[    1.445613] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.445627] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.445638] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.445724] ehci-pci 0000:00:12.2: debug port 1
[    1.445808] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0348000
[    1.455223] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.455395] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.455401] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.455406] usb usb1: Product: EHCI Host Controller
[    1.455411] usb usb1: Manufacturer: Linux 3.13.0-65-generic ehci_hcd
[    1.455416] usb usb1: SerialNumber: 0000:00:12.2
[    1.456019] hub 1-0:1.0: USB hub found
[    1.456043] hub 1-0:1.0: 5 ports detected
[    1.456822] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.456836] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.456852] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.456937] ehci-pci 0000:00:13.2: debug port 1
[    1.456998] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0346000
[    1.467038] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.467214] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.467220] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.467225] usb usb2: Product: EHCI Host Controller
[    1.467230] usb usb2: Manufacturer: Linux 3.13.0-65-generic ehci_hcd
[    1.467235] usb usb2: SerialNumber: 0000:00:13.2
[    1.467833] hub 2-0:1.0: USB hub found
[    1.467857] hub 2-0:1.0: 5 ports detected
[    1.468404] ehci-platform: EHCI generic platform driver
[    1.468429] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.468432] ohci-pci: OHCI PCI platform driver
[    1.468754] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.468767] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.468822] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0349000
[    1.527312] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.527323] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.527329] usb usb3: Product: OHCI PCI host controller
[    1.527333] usb usb3: Manufacturer: Linux 3.13.0-65-generic ohci_hcd
[    1.527338] usb usb3: SerialNumber: 0000:00:12.0
[    1.527974] hub 3-0:1.0: USB hub found
[    1.528070] hub 3-0:1.0: 5 ports detected
[    1.528741] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.528755] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[    1.528789] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0347000
[    1.587343] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.587353] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.587359] usb usb4: Product: OHCI PCI host controller
[    1.587363] usb usb4: Manufacturer: Linux 3.13.0-65-generic ohci_hcd
[    1.587368] usb usb4: SerialNumber: 0000:00:13.0
[    1.587979] hub 4-0:1.0: USB hub found
[    1.588074] hub 4-0:1.0: 5 ports detected
[    1.588518] ohci-platform: OHCI generic platform driver
[    1.588548] uhci_hcd: USB Universal Host Controller Interface driver
[    1.588906] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.588919] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
[    1.589210] xhci_hcd 0000:00:10.0: irq 40 for MSI/MSI-X
[    1.589226] xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
[    1.589242] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
[    1.589427] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    1.589432] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.589436] usb usb5: Product: xHCI Host Controller
[    1.589441] usb usb5: Manufacturer: Linux 3.13.0-65-generic xhci_hcd
[    1.589445] usb usb5: SerialNumber: 0000:00:10.0
[    1.590027] hub 5-0:1.0: USB hub found
[    1.590124] hub 5-0:1.0: 2 ports detected
[    1.590408] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.590419] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[    1.592643] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    1.592648] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.592653] usb usb6: Product: xHCI Host Controller
[    1.592657] usb usb6: Manufacturer: Linux 3.13.0-65-generic xhci_hcd
[    1.592661] usb usb6: SerialNumber: 0000:00:10.0
[    1.593110] hub 6-0:1.0: USB hub found
[    1.593206] hub 6-0:1.0: 2 ports detected
[    1.599682] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS2] at 0x60,0x64 irq 1,12
[    1.630438] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.630529] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.631127] mousedev: PS/2 mouse device common for all mice
[    1.633185] rtc_cmos 00:04: RTC can wake from S4
[    1.633532] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.633652] rtc_cmos 00:04: alarms up to one month, 114 bytes nvram, hpet irqs
[    1.633851] device-mapper: uevent: version 1.0.3
[    1.634054] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.634069] ledtrig-cpu: registered to indicate activity on CPUs
[    1.634284] TCP: cubic registered
[    1.634464] NET: Registered protocol family 10
[    1.634826] NET: Registered protocol family 17
[    1.634856] Key type dns_resolver registered
[    1.635544] Loading compiled-in X.509 certificates
[    1.638262] Loaded X.509 cert 'Magrathea: Glacier signing key: e1880bb8882cef95be763dfd1fabc4dc436c45ac'
[    1.638292] registered taskstats version 1
[    1.645170] Key type trusted registered
[    1.656984] Key type encrypted registered
[    1.657000] AppArmor: AppArmor sha1 policy hashing enabled
[    1.657006] IMA: No TPM chip found, activating TPM-bypass!
[    1.657606] regulator-dummy: disabling
[    1.657718]   Magic number: 3:244:929
[    1.657957] rtc_cmos 00:04: setting system clock to 2015-10-05 09:56:19 UTC (1444038979)
[    1.658161] acpi-cpufreq: overriding BIOS provided _PSD data
[    1.658334] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.658337] EDD information not available.
[    1.658440] PM: Hibernation image not present or could not be loaded.
[    1.661769] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    1.661779] Write protecting the kernel read-only data: 12288k
[    1.667665] Freeing unused kernel memory: 784K (ffff88000173c000 - ffff880001800000)
[    1.672655] Freeing unused kernel memory: 680K (ffff880001b56000 - ffff880001c00000)
[    1.672821] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.721791] systemd-udevd[103]: starting version 204
[    1.767148] usb 1-4: new high-speed USB device number 2 using ehci-pci
[    1.823822] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dsfield-211)
[    1.823843] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC0.ACAD._PSR] (Node ffff880101125460), AE_ALREADY_EXISTS (20131115/psparse-536)
[    1.823872] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20131115/ac-130)
[    1.843700] ACPI: Marking method _PSR as Serialized because of AE_ALREADY_EXISTS error
[    1.870896] ahci 0000:00:11.0: version 3.0
[    1.881072] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.881097] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.899725] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[    1.900101] r8169 0000:02:00.0 eth0: RTL8105e at 0xffffc90000646000, b8:88:e3:89:c2:41, XID 00c00000 IRQ 43
[    1.900337] ahci 0000:00:11.0: irq 44 for MSI/MSI-X
[    1.900438] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.900447] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    1.911318] usb 1-4: New USB device found, idVendor=04f2, idProduct=b2e1
[    1.911329] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.911334] usb 1-4: Product: Lenovo EasyCamera
[    1.911339] usb 1-4: Manufacturer: Vimicro Corp.
[    2.013402] scsi0 : ahci
[    2.013647] scsi1 : ahci
[    2.013805] ata1: SATA max UDMA/133 abar m2048@0xf034a000 port 0xf034a100 irq 44
[    2.013811] ata2: SATA max UDMA/133 abar m2048@0xf034a000 port 0xf034a180 irq 44
[    2.023411] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.158522] usb 2-1: New USB device found, idVendor=0bda, idProduct=0129
[    2.158539] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.158548] usb 2-1: Product: USB2.0-CRW
[    2.158556] usb 2-1: Manufacturer: Generic
[    2.158564] usb 2-1: SerialNumber: 20100201396000000
[    2.267568] tsc: Refined TSC clocksource calibration: 1397.458 MHz
[    2.503586] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.503640] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.505711] ata2.00: ATAPI: Optiarc DVD RW AD-7740H, A842, max UDMA/100
[    2.505743] ata1.00: ATA-8: WDC WD10JPVT-24A1YT0, 01.01A01, max UDMA/133
[    2.505753] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.507245] ata1.00: configured for UDMA/133
[    2.507786] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10JPVT-24A 01.0 PQ: 0 ANSI: 5
[    2.507826] ata2.00: configured for UDMA/100
[    2.508187] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.508472] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.508478] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.508984] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7740H  A842 PQ: 0 ANSI: 5
[    2.509131] sd 0:0:0:0: [sda] Write Protect is off
[    2.509146] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.509275] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.511560] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.511577] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.511888] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.512116] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.550901]  sda: sda1 sda2 < sda5 >
[    2.552514] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.946637] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.072131] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f02)
[    3.103545] psmouse serio1: elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
[    3.266516] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[    3.269090] Switched to clocksource tsc
[    3.747848] random: init urandom read with 114 bits of entropy available
[    3.975488] random: nonblocking pool is initialized
[   11.898551] Adding 3746812k swap on /dev/sda5.  Priority:-1 extents:1 across:3746812k FS
[   12.105245] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.276155] systemd-udevd[272]: starting version 204
[   12.530740] lp: driver loaded but no devices found
[   12.550688] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   12.551033] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   12.557997] ppdev: user-space parallel port driver
[   12.703022] [drm] Initialized drm 1.1.0 20060810
[   12.773383] [drm] radeon kernel modesetting enabled.
[   12.800063] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMB0 1 (20131115/utaddress-251)
[   12.800084] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.800549] checking generic (e0000000 420000) vs hw (e0000000 10000000)
[   12.800554] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[   12.800608] Console: switching to colour dummy device 80x25
[   12.824426] [drm] initializing kernel modesetting (PALM 0x1002:0x9809 0x17AA:0x397F).
[   12.824482] [drm] register mmio base: 0xF0300000
[   12.824486] [drm] register mmio size: 262144
[   12.825400] ATOM BIOS: AMD
[   12.825484] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[   12.825490] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[   12.825495] [drm] Detected VRAM RAM=384M, BAR=256M
[   12.825498] [drm] RAM width 32bits DDR
[   12.831351] [TTM] Zone  kernel: Available graphics memory: 1804254 kiB
[   12.831359] [TTM] Initializing pool allocator
[   12.831370] [TTM] Initializing DMA pool allocator
[   12.831426] [drm] radeon: 384M of VRAM memory ready
[   12.831430] [drm] radeon: 1024M of GTT memory ready.
[   12.831461] [drm] Loading PALM Microcode
[   12.971512] input: Ideapad extra buttons as /devices/platform/VPC2004:00/input/input9
[   13.096802] kvm: Nested Virtualization enabled
[   13.096814] kvm: Nested Paging enabled
[   13.149530] Linux video capture interface: v2.00
[   13.150654] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[   13.180318] scsi2 : SCSI emulation for RTS5139 USB card reader
[   13.181953] scsi 2:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[   13.185002] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   13.189994] usbcore: registered new interface driver rts5139
[   13.200000] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b2e1)
[   13.211723] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input10
[   13.211986] usbcore: registered new interface driver uvcvideo
[   13.211995] USB Video Class driver (1.1.1)
[   13.323505] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   13.326501] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   13.355176] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[   13.356136] radeon 0000:00:01.0: WB enabled
[   13.356145] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff8800c7618c00
[   13.356149] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff8800c7618c0c
[   13.356946] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90004832118
[   13.356950] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.356951] [drm] Driver supports precise vblank timestamp query.
[   13.356954] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[   13.356998] radeon 0000:00:01.0: irq 45 for MSI/MSI-X
[   13.357025] radeon 0000:00:01.0: radeon: using MSI.
[   13.357071] [drm] radeon: irq initialized.
[   13.374693] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[   13.419159] [drm] ring test on 0 succeeded in 1 usecs
[   13.419170] [drm] ring test on 3 succeeded in 2 usecs
[   13.481243] type=1400 audit(1444038991.316:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=361 comm="apparmor_parser"
[   13.481257] type=1400 audit(1444038991.316:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=361 comm="apparmor_parser"
[   13.481265] type=1400 audit(1444038991.316:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=361 comm="apparmor_parser"
[   13.482238] type=1400 audit(1444038991.316:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=361 comm="apparmor_parser"
[   13.482249] type=1400 audit(1444038991.316:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=361 comm="apparmor_parser"
[   13.482767] type=1400 audit(1444038991.316:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=361 comm="apparmor_parser"
[   13.582042] [drm] ring test on 5 succeeded in 1 usecs
[   13.609955] [drm] UVD initialized successfully.
[   13.627371] [drm] Enabling audio 0 support
[   13.627432] [drm] ib test on ring 0 succeeded in 0 usecs
[   13.627473] [drm] ib test on ring 3 succeeded in 0 usecs
[   13.759831] [drm] ib test on ring 5 succeeded
[   13.789933] [drm] Radeon Display Connectors
[   13.789942] [drm] Connector 0:
[   13.789946] [drm]   LVDS-1
[   13.789949] [drm]   HPD1
[   13.789954] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   13.789957] [drm]   Encoders:
[   13.789960] [drm]     LCD1: INTERNAL_UNIPHY
[   13.789963] [drm] Connector 1:
[   13.789966] [drm]   HDMI-A-1
[   13.789968] [drm]   HPD2
[   13.789972] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   13.789974] [drm]   Encoders:
[   13.789977] [drm]     DFP1: INTERNAL_UNIPHY
[   13.789979] [drm] Connector 2:
[   13.789982] [drm]   VGA-1
[   13.789986] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[   13.789988] [drm]   Encoders:
[   13.789991] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   13.790068] [drm] Internal thermal controller without fan control
[   13.790224] [drm] Found smc ucode version: 0x00010601
[   13.931377] [drm] radeon: dpm initialized
[   14.419676] init: failsafe main process (524) killed by TERM signal
[   14.677920] [drm] fb mappable at 0xE0477000
[   14.677929] [drm] vram apper at 0xE0000000
[   14.677932] [drm] size 4325376
[   14.677935] [drm] fb depth is 24
[   14.677938] [drm]    pitch is 5632
[   14.678383] fbcon: radeondrmfb (fb0) is primary device
[   14.864967] type=1400 audit(1444038992.700:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=612 comm="apparmor_parser"
[   14.864985] type=1400 audit(1444038992.700:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=612 comm="apparmor_parser"
[   14.868202] type=1400 audit(1444038992.704:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=612 comm="apparmor_parser"
[   15.075851] type=1400 audit(1444038992.912:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=677 comm="apparmor_parser"
[   15.200190] Console: switching to colour frame buffer device 170x48
[   15.207938] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[   15.207941] radeon 0000:00:01.0: registered panic notifier
[   15.209455] [drm:radeon_acpi_init] *ERROR* Cannot find a backlight controller
[   15.209662] [drm] Initialized radeon 2.36.0 20080528 for 0000:00:01.0 on minor 0
[   15.212162] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.216727] init: cups main process (624) killed by HUP signal
[   15.216761] init: cups main process ended, respawning
[   15.227700] hda-intel 0000:00:14.2: Using LPIB position fix
[   15.243282] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[   15.297628] Bluetooth: Core ver 2.17
[   15.297696] NET: Registered protocol family 31
[   15.297701] Bluetooth: HCI device and connection manager initialized
[   15.297721] Bluetooth: HCI socket layer initialized
[   15.297727] Bluetooth: L2CAP socket layer initialized
[   15.297738] Bluetooth: SCO socket layer initialized
[   15.301145] hda_codec: CX20590: BIOS auto-probing.
[   15.301711] autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[   15.301716]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.301720]    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[   15.301722]    mono: mono_out=0x0
[   15.301725]    inputs:
[   15.301729]      Internal Mic=0x1b
[   15.301732]      Mic=0x1a
[   15.309425] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[   15.312354] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[   15.352587] Bluetooth: RFCOMM TTY layer initialized
[   15.352622] Bluetooth: RFCOMM socket layer initialized
[   15.352635] Bluetooth: RFCOMM ver 1.11
[   15.359280] cfg80211: Calling CRDA to update world regulatory domain
[   15.363201] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.363212] Bluetooth: BNEP filters: protocol multicast
[   15.363234] Bluetooth: BNEP socket layer initialized
[   15.402191] cfg80211: World regulatory domain updated:
[   15.402204] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   15.402209] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.402214] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.402218] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.402222] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.402226] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.522873] ath: phy0: Enable LNA combining
[   15.526989] ath: phy0: ASPM enabled: 0x43
[   15.526999] ath: EEPROM regdomain: 0x65
[   15.527002] ath: EEPROM indicates we should expect a direct regpair map
[   15.527009] ath: Country alpha2 being used: 00
[   15.527012] ath: Regpair used: 0x65
[   15.565895] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.567329] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90004b80000, irq=17
[   17.516549] r8169 0000:02:00.0 eth0: link down
[   17.517087] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.518467] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.563979] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.568690] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.578335] wlan0: authenticate with a6:f4:5a:7b:d1:7c
[   19.603005] wlan0: send auth to a6:f4:5a:7b:d1:7c (try 1/3)
[   19.605208] wlan0: authenticated
[   19.605602] ath9k 0000:06:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   19.609184] wlan0: associate with a6:f4:5a:7b:d1:7c (try 1/3)
[   19.613119] wlan0: RX AssocResp from a6:f4:5a:7b:d1:7c (capab=0x411 status=0 aid=1)
[   19.613534] wlan0: associated
[   19.613595] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   19.615226] wlan0: deauthenticating from a6:f4:5a:7b:d1:7c by local choice (reason=2)
[   19.628741] cfg80211: Calling CRDA to update world regulatory domain
[   19.629122] wlan0: authenticate with a6:f4:5a:7b:d1:7c
[   19.648008] wlan0: send auth to a6:f4:5a:7b:d1:7c (try 1/3)
[   19.648465] cfg80211: World regulatory domain updated:
[   19.648479] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.648484] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.648489] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.648493] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.648497] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.648501] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.650662] wlan0: authenticated
[   19.652756] ath9k 0000:06:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   19.653026] wlan0: associate with a6:f4:5a:7b:d1:7c (try 1/3)
[   19.656033] wlan0: RX AssocResp from a6:f4:5a:7b:d1:7c (capab=0x411 status=0 aid=1)
[   19.656445] wlan0: associated
[   20.928651] init: plymouth-upstart-bridge main process ended, respawning
[   20.951494] init: plymouth-upstart-bridge main process (1077) terminated with status 1
[   20.951538] init: plymouth-upstart-bridge main process ended, respawning
[   29.662408] wlan0: deauthenticating from a6:f4:5a:7b:d1:7c by local choice (reason=3)
[   29.672105] cfg80211: Calling CRDA to update world regulatory domain
[   29.683966] cfg80211: World regulatory domain updated:
[   29.683979] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   29.683985] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   29.683989] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   29.683993] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   29.683997] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   29.684001] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   30.639080] wlan0: authenticate with a6:f4:5a:7b:d1:7c
[   30.660024] wlan0: send auth to a6:f4:5a:7b:d1:7c (try 1/3)
[   30.662065] wlan0: authenticated
[   30.662577] ath9k 0000:06:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   30.664823] wlan0: associate with a6:f4:5a:7b:d1:7c (try 1/3)
[   30.669011] wlan0: RX AssocResp from a6:f4:5a:7b:d1:7c (capab=0x411 status=0 aid=1)
[   30.669436] wlan0: associated
[   45.158884] audit_printk_skb: 105 callbacks suppressed
[   45.158895] type=1400 audit(1444039022.987:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1942 comm="apparmor_parser"
[   45.158914] type=1400 audit(1444039022.987:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1942 comm="apparmor_parser"
[   45.159890] type=1400 audit(1444039022.987:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1942 comm="apparmor_parser"
}

moko138 · Le 05/10/2015, à 17:26

[   13.582042] [drm] ring test on 5 succeeded in 1 usecs
[   13.609955] [drm] UVD initialized successfully.
[   13.627371] [drm] Enabling audio 0 support
[   13.627432] [drm] ib test on ring 0 succeeded in 0 usecs
[   13.627473] [drm] ib test on ring 3 succeeded in 0 usecs
[   13.759831] [drm] ib test on ring 5 succeeded
[   13.789933] [drm] Radeon Display Connectors
[   13.789942] [drm] Connector 0:
[   13.789946] [drm]   LVDS-1
[   13.789949] [drm]   HPD1
[   13.789954] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   13.789957] [drm]   Encoders:
[   13.789960] [drm]     LCD1: INTERNAL_UNIPHY
[   13.789963] [drm] Connector 1:
[   13.789966] [drm]   HDMI-A-1
[   13.789968] [drm]   HPD2
[   13.789972] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   13.789974] [drm]   Encoders:
[   13.789977] [drm]     DFP1: INTERNAL_UNIPHY
[   13.789979] [drm] Connector 2:
[   13.789982] [drm]   VGA-1
[   13.789986] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[   13.789988] [drm]   Encoders:
[   13.789991] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   13.790068] [drm] Internal thermal controller without fan control # <-- Étonnant.
[   13.790224] [drm] Found smc ucode version: 0x00010601
[   13.931377] [drm] radeon: dpm initialized
[   14.419676] init: failsafe main process (524) killed by TERM signal
[   14.677920] [drm] fb mappable at 0xE0477000
[   14.677929] [drm] vram apper at 0xE0000000
[   14.677932] [drm] size 4325376
[   14.677935] [drm] fb depth is 24
[   14.677938] [drm]    pitch is 5632
[   14.678383] fbcon: radeondrmfb (fb0) is primary device
[   15.200190] Console: switching to colour frame buffer device 170x48
[   15.207938] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[   15.207941] radeon 0000:00:01.0: registered panic notifier  # <-- LÀ.
[   15.209455] [drm:radeon_acpi_init] *ERROR* Cannot find a backlight controller
[   15.209662] [drm] Initialized radeon 2.36.0 20080528 for 0000:00:01.0 on minor 0

"Yapluka" gougueler...
Et donne

cat /etc/default/grub

Compte anonymisé · Le 05/10/2015, à 18:17

moko138 a écrit :

[   13.790068] [drm] Internal thermal controller without fan control # <-- Étonnant.

[   15.207941] radeon 0000:00:01.0: registered panic notifier  # <-- LÀ.

Étonnant en effet, j'ai pourtant correctement procéder, d'ou est-ce que ça provient , quel est le probléme ?

moko138 a écrit :

"Yapluka" gougueler...

??? J'obtiens beaucoup de résultas de sujets variés en googlant "Yapluka" .

nam1962 · Le 05/10/2015, à 18:30

Tu as testé nomodeset ?

Compte anonymisé · Le 05/10/2015, à 19:59

nam1962 a écrit :

Tu as testé nomodeset ?

Je ne l'ai pas encore testé mais je voudrais d'abord comprendre comment fonctionnent les noyaux.
Par exemple les noyaux(kernel) installés sur mon laptop sont :

:~$ dpkg -l | grep -Ei "linux-headers|linux-image"
ii  linux-headers-3.13.0-24                   3.13.0-24.47                               all          Header files related to Linux kernel version 3.13.0
ii  linux-headers-3.13.0-24-generic           3.13.0-24.47                               amd64        Linux kernel headers for version 3.13.0 on 64 bit x86 SMP
ii  linux-headers-3.13.0-65                   3.13.0-65.105                              all          Header files related to Linux kernel version 3.13.0
ii  linux-headers-3.13.0-65-generic           3.13.0-65.105                              amd64        Linux kernel headers for version 3.13.0 on 64 bit x86 SMP
ii  linux-headers-generic                     3.13.0.65.71                               amd64        Generic Linux kernel headers
ii  linux-image-3.13.0-24-generic             3.13.0-24.47                               amd64        Linux kernel image for version 3.13.0 on 64 bit x86 SMP
ii  linux-image-3.13.0-65-generic             3.13.0-65.105                              amd64        Linux kernel image for version 3.13.0 on 64 bit x86 SMP
ii  linux-image-extra-3.13.0-24-generic       3.13.0-24.47                               amd64        Linux kernel extra modules for version 3.13.0 on 64 bit x86 SMP
ii  linux-image-extra-3.13.0-65-generic       3.13.0-65.105                              amd64        Linux kernel extra modules for version 3.13.0 on 64 bit x86 SMP
ii  linux-image-generic                       3.13.0.65.71                               amd64        Generic Linux kernel image
:~$

(Glisser à droite, c'est un peu long)

Alors que celui en cours d'utilisation est :

:~$ uname -r
3.13.0-65-generic
:~$

Je pense qu'avant de parametrer le kernel avec nomodeset, on pourrait d'abord s'intéresser aux noyaux non?

Dernière modification par Compte anonymisé (Le 05/10/2015, à 20:40)

moko138 · Le 05/10/2015, à 20:48

Je pense que dans ta situation tu devrais suivre les suggestions de nam1962.
Dans le même sens que nam, je t'avais demandé en #13 un retour que tu n'as pas encore donné.

Quand le souci que tu as exposé en #1 sera résolu, tu pourras assouvir ta soif métaphysique.
Ou alors je pense que nam avant de te répondre pourrait d'abord m'expliquer le système satellitaire de Jupiter et le sexe des anges.

nam1962 · Le 05/10/2015, à 21:06

...alors pour les satellites de Jupiter je merde un peu, par contre on peut discuter du détail des soleils de Vinéa.
...côté sexe des anges c'est âchement plus compliqué vu que selon la Genèse 18, 1 - 22, 24 ils se déguisent (ce qui complique tout, tu l'avoueras)

...sinon @infinite : tu as testé nomodeset ? (pour tes deux noyaux, sorry, je ne suis pas rentré dans le détail du code source)

Compte anonymisé · Le 05/10/2015, à 21:07

moko138 a écrit :

...je t'avais demandé en #13 un retour que tu n'as pas encore donné.

:~$ cat /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
# GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux acpi_backlight=vendor"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
:~$

moko138 a écrit :

Quand le souci que tu as exposé en #1 sera résolu, tu pourras assouvir ta soif métaphysique.

Tout à fais d'accord, et si j'ai écris à propos des noyaux installés c'est parce que ça a un rapport direct avec nomodeset .

Dernière modification par Compte anonymisé (Le 05/10/2015, à 21:10)

Compte anonymisé · Le 05/10/2015, à 21:36

nam1962, j'ai utilisé ton lien pour configurer nomodeset en boot et plus précisement >celui-ci
C'est alors que se produit un phenomene inatendu, lorsque j'édite nomodeset dans grub (avant quiet splash comme indiqué) la touche 'm' correspond a l'écrit à " ; " .

Dernière modification par Compte anonymisé (Le 05/10/2015, à 21:42)

MicP · Le 05/10/2015, à 22:10

Dans ce contexte (édition ligne de boot) ton clavier n'est pas encore configuré <=> il est en anglais par défaut => Pour obtenir un "m" il faut appuyer sur la touche à droite du "n" => ","

Dernière modification par MicP (Le 05/10/2015, à 22:11)

Compte anonymisé · Le 07/10/2015, à 15:33

Merci à tous pour les méthodes et de votre patience .

Finalement je n'ai plus le message d'erreur aprés:

gksudo mousepad /etc/default/grub

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset"
GRUB_CMDLINE_LINUX=""

enregistrer+quitter, ensuite

sudo update-grub

et redémarrer et c'est bon.
Pour info aprés cette procedure au menu grub(shift) nomodeset apparait dans le 1er noyau (juste aprés ces étapes).

Une derniere chose:

moko138 a écrit :

"Yapluka" gougueler...

????

nam1962 · Le 07/10/2015, à 15:45

Yavaika ferlepostd'eu !

moko138 · Le 07/10/2015, à 16:26

"Yapluka" gougueler... =
Il n'y a plus qu'à chercher via google les 2 lignes que j'avais annotées juste avant :

[ 13.790068] [drm] Internal thermal controller without fan control # <-- Étonnant.
[ 15.207941] radeon 0000:00:01.0: registered panic notifier # <-- LÀ.

Soit, avec les guillemets :
"Cannot find a backlight controller" "drm] Internal thermal controller without fan control" radeon "registered panic notifier" solved OR résolu
Je viens de le faire, ça donne quatre résultats,

ou, s'il faut élargir :
"Cannot find a backlight controller" "drm] Internal thermal controller without fan control" radeon "registered panic notifier"
qui donne 127 résultats.

Mais bon, nam avait proposé nomodeset en #2.

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 04/10/2015, à 09:10

[RESOLU]Xubuntu Cannot find a backlight controller

#2 Le 04/10/2015, à 09:14

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#3 Le 04/10/2015, à 10:30

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#4 Le 04/10/2015, à 11:05

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#5 Le 04/10/2015, à 11:29

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#6 Le 04/10/2015, à 11:56

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#7 Le 04/10/2015, à 12:38

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#8 Le 04/10/2015, à 13:06

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#9 Le 05/10/2015, à 02:42

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#10 Le 05/10/2015, à 08:42

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#11 Le 05/10/2015, à 09:27

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#12 Le 05/10/2015, à 11:25

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#13 Le 05/10/2015, à 17:26

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#14 Le 05/10/2015, à 18:17

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#15 Le 05/10/2015, à 18:30

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#16 Le 05/10/2015, à 19:59

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#17 Le 05/10/2015, à 20:48

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#18 Le 05/10/2015, à 21:06

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#19 Le 05/10/2015, à 21:07

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#20 Le 05/10/2015, à 21:36

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#21 Le 05/10/2015, à 22:10

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#22 Le 07/10/2015, à 15:33

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#23 Le 07/10/2015, à 15:45

Re : [RESOLU]Xubuntu Cannot find a backlight controller

#24 Le 07/10/2015, à 16:26

Re : [RESOLU]Xubuntu Cannot find a backlight controller

Pied de page des forums