#1 Le 21/02/2008, à 19:55
- our@nos
installer clé wifi (résolu)
bonjour,
quelqu'un peut-il m'aider a installer ma clé wifi ?
merci !!!
Dernière modification par our@nos (Le 25/02/2008, à 09:18)
Hors ligne
#2 Le 21/02/2008, à 20:01
- Bonux
Re : installer clé wifi (résolu)
Peut etre,
commence par faire dans le terminal un :
lsusb
Pour qu'on sache comment elle s'apelle.
Hors ligne
#3 Le 21/02/2008, à 20:04
- our@nos
Re : installer clé wifi (résolu)
j'ecris juste lsusb, rien d'autre avant ?
Hors ligne
#4 Le 21/02/2008, à 20:37
- our@nos
Re : installer clé wifi (résolu)
j'ai un hub usb, ca change qqchose ??
Hors ligne
#5 Le 21/02/2008, à 20:52
- Bonux
Re : installer clé wifi (résolu)
Oui juste lsusb, rien d'autre avant.
Je ne sais pas pour le hub, je crois que ce n'est qu'un simple "multiprise".
Hors ligne
#6 Le 21/02/2008, à 20:54
- our@nos
Re : installer clé wifi (résolu)
et a part du moment ou on a son nom on fait quoi ?
Hors ligne
#7 Le 21/02/2008, à 21:15
- willy78
Re : installer clé wifi (résolu)
en fait il faut que tu donnes sur le forum toutes ces infos:
http://forum.ubuntu-fr.org/viewtopic.php?id=141183
pour un diagnostic c'est important!
Quelques tutos pour le wifi sous Ubuntu:
http://wlety.free.fr/forum
Hors ligne
#8 Le 22/02/2008, à 14:38
- our@nos
Re : installer clé wifi (résolu)
alors...
cedric@cedric-desktop:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=7.10
DISTRIB_CODENAME=gutsy
DISTRIB_DESCRIPTION="Ubuntu 7.10"
cedric@cedric-desktop:~$
lsusb
cedric@cedric-desktop:~$ lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 003: ID 0457:0163 Silicon Integrated Systems Corp.
Bus 004 Device 002: ID 05e3:0604 Genesys Logic, Inc. USB 1.1 Hub
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
cedric@cedric-desktop:~$
lspci
cedric@cedric-desktop:~$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 02)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50)
00:0a.0 Communication controller: ESS Technology ES2838/2839 SuperLink Modem (rev 01)
00:0d.0 USB Controller: NEC Corporation USB (rev 41)
00:0d.1 USB Controller: NEC Corporation USB (rev 41)
00:0d.2 USB Controller: NEC Corporation USB 2.0 (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
cedric@cedric-desktop:~$
sudo lshw -C network
écrit plusieurs trucs pci sysfs... puis rien
lsmod
cedric@cedric-desktop:~$ lsmod
Module Size Used by
sg 36764 0
radeon 125472 2
drm 83348 3 radeon
rfcomm 42136 2
l2cap 26240 11 rfcomm
bluetooth 57060 4 rfcomm,l2cap
ppdev 10244 0
cpufreq_powersave 2688 0
cpufreq_userspace 5280 0
cpufreq_conservative 8072 0
cpufreq_stats 7232 0
cpufreq_ondemand 9612 0
freq_table 5792 2 cpufreq_stats,cpufreq_ondemand
sbs 19592 0
video 18060 0
ac 6148 0
button 8976 0
dock 10656 0
container 5504 0
battery 11012 0
lp 12580 0
snd_via82xx 29336 1
gameport 16776 1 snd_via82xx
snd_ac97_codec 100644 1 snd_via82xx
ac97_bus 3200 1 snd_ac97_codec
snd_pcm_oss 44672 0
snd_mixer_oss 17664 1 snd_pcm_oss
snd_pcm 80388 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 11400 2 snd_via82xx,snd_pcm
snd_mpu401_uart 9600 1 snd_via82xx
snd_seq_dummy 4740 0
snd_seq_oss 33152 0
snd_seq_midi 9600 0
snd_rawmidi 25728 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
serio_raw 8068 0
pcspkr 4224 0
psmouse 39952 0
snd_seq 53232 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 24324 2 snd_pcm,snd_seq
snd_seq_device 9228 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
i2c_viapro 10004 0
via686a 17416 0
i2c_isa 5248 1 via686a
snd 54660 13 snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 8800 1 snd
i2c_core 26112 3 i2c_viapro,via686a,i2c_isa
parport_pc 37412 1
via_agp 11264 1
agpgart 35016 2 drm,via_agp
parport 37448 3 ppdev,lp,parport_pc
shpchp 34580 0
pci_hotplug 32704 1 shpchp
evdev 11136 4
ext3 133896 1
jbd 60456 1 ext3
mbcache 9732 1 ext3
ide_disk 18560 5
ide_cd 32672 0
cdrom 37536 1 ide_cd
ata_generic 8452 0
libata 125168 1 ata_generic
scsi_mod 147084 2 sg,libata
floppy 60004 0
ehci_hcd 36492 0
ohci_hcd 22916 0
uhci_hcd 26640 0
usbcore 138632 4 ehci_hcd,ohci_hcd,uhci_hcd
via82cxxx 10372 0 [permanent]
ide_core 116804 3 ide_disk,ide_cd,via82cxxx
thermal 14344 0
processor 32072 1 thermal
fan 5764 0
fuse 47124 3
apparmor 40728 0
commoncap 8320 1 apparmor
cedric@cedric-desktop:~$
ifconfig
cedric@cedric-desktop:~$ ifconfig
lo Lien encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:0 (0.0 b) Octets transmis:0 (0.0 b)
cedric@cedric-desktop:~$
uname -r -m
cedric@cedric-desktop:~$ uname -r -m
2.6.22-14-generic i686
cedric@cedric-desktop:~$
cat /etc/network/interfaces
cedric@cedric-desktop:~$ cat /etc/network/interfaces
auto lo
iface lo inet loopback
iwlist scan commande introuvable
...j'ai oublié iwconfig pour l'instant...
merci
Hors ligne
#9 Le 22/02/2008, à 14:44
- our@nos
Re : installer clé wifi (résolu)
ma clé usb wifi telle qu'elle est reconnue dans windows :
802.11g USB 2.0 Wireless LAN Adapter #4
Hors ligne
#10 Le 22/02/2008, à 14:49
- our@nos
Re : installer clé wifi (résolu)
marque MENTOR
Hors ligne
#11 Le 22/02/2008, à 15:02
- willy78
Re : installer clé wifi (résolu)
Quelques tutos pour le wifi sous Ubuntu:
http://wlety.free.fr/forum
Hors ligne
#12 Le 22/02/2008, à 15:08
- our@nos
Re : installer clé wifi (résolu)
et cette procédure va installer ma clé wifi qui n'est pas de la meme marque ???
Hors ligne
#13 Le 22/02/2008, à 15:11
- our@nos
Re : installer clé wifi (résolu)
je précise que j'ai pas internet DU TOUT sans le wifi, donc je dois activer la clé AVANT de pouvoir avoir accès à internet
Hors ligne
#14 Le 22/02/2008, à 15:45
- willy78
Re : installer clé wifi (résolu)
Oui la marque n'a aucune importance c'est le chipset qui est important
Si tu as internet sur un pc windows tu télécharge le driver du tuto sur une clé usb que et tu mets le fichier sur le bureau
une fois que tu as fais ça signal le et on te donnera la suite des opérations
et donnes ce retour pour vérifié la présence de l'archive sur le bureau
ls ~/Bureau
Quelques tutos pour le wifi sous Ubuntu:
http://wlety.free.fr/forum
Hors ligne
#15 Le 22/02/2008, à 15:48
- our@nos
Re : installer clé wifi (résolu)
mais j'ai le driver en .inf
seulement je pige pas tout dans la doc du site, je me perds un peu y'a des moments ou je sais pas trop ce qu'il faut mettre dans le terminal
Hors ligne
#16 Le 22/02/2008, à 15:52
- our@nos
Re : installer clé wifi (résolu)
bon, sinon j'ai telechargé le driver (pas sur le bureau mais sur mon dd, j'y ai acces avec ubuntu)
Hors ligne
#17 Le 22/02/2008, à 15:57
- our@nos
Re : installer clé wifi (résolu)
veux tu quand meme que je le copie sur le bureau et que je te donne le retour de
ls ~/Bureau
?
Hors ligne
#18 Le 22/02/2008, à 15:59
- our@nos
Re : installer clé wifi (résolu)
parce que c chiant je bosse sur 1 seule machine, à chaque fois je dois changer l'ordre de boot dans le bios et redemarrer ubuntu puis eteindre, rechanger l'ordre de boot et redemarrer sur xp....
Hors ligne
#19 Le 22/02/2008, à 16:40
- willy78
Re : installer clé wifi (résolu)
ça ça peux se régler sans aller dans le bios!
mais là j'ai pas le temps!
Donnes ces retours
sudo fdisk -l
cat /boot/grub/menu.lst
Dernière modification par willy78 (Le 22/02/2008, à 16:54)
Quelques tutos pour le wifi sous Ubuntu:
http://wlety.free.fr/forum
Hors ligne
#20 Le 22/02/2008, à 16:57
- our@nos
Re : installer clé wifi (résolu)
cedric@cedric-desktop:~$ cat /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=d65278a0-3724-4624-ad76-f8f5fe59fa3f ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=fr_FR
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 7.10, kernel 2.6.22-14-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=d65278a0-3724-4624-ad76-f8f5fe59fa3f ro quiet splash locale=fr_FR
initrd /boot/initrd.img-2.6.22-14-generic
quiet
title Ubuntu 7.10, kernel 2.6.22-14-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=d65278a0-3724-4624-ad76-f8f5fe59fa3f ro single
initrd /boot/initrd.img-2.6.22-14-generic
title Ubuntu 7.10, memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hdc1
title Microsoft Windows XP Professionnel
root (hd0,0)
savedefault
chainloader +1
cedric@cedric-desktop:~$
cedric@cedric-desktop:~$
cedric@cedric-desktop:~$ sudo fdisk -l
Disque /dev/hdc: 164.6 Go, 164696555520 octets
255 heads, 63 sectors/track, 20023 cylinders
Units = cylindres of 16065 * 512 = 8225280 bytes
Disk identifier: 0xa6dca6dc
Périphérique Amorce Début Fin Blocs Id Système
/dev/hdc1 * 1 1912 15358108+ 7 HPFS/NTFS
/dev/hdc2 1913 20022 145468575 f W95 Etendu (LBA)
/dev/hdc5 1913 20022 145468543+ 7 HPFS/NTFS
Disque /dev/hdd: 30.7 Go, 30750031872 octets
255 heads, 63 sectors/track, 3738 cylinders
Units = cylindres of 16065 * 512 = 8225280 bytes
Disk identifier: 0xc328c328
Périphérique Amorce Début Fin Blocs Id Système
/dev/hdd1 * 1 3579 28748286 83 Linux
/dev/hdd2 3580 3738 1277167+ 5 Extended
/dev/hdd5 3580 3738 1277136 82 Linux swap / Solaris
cedric@cedric-desktop:~$
voilà
Hors ligne
#21 Le 22/02/2008, à 17:06
- willy78
Re : installer clé wifi (résolu)
2dite le fichier menu.lst
sudo gedit /boot/grub/menu.lst
trouve le bloc pour xp
le tiens c'est ça:
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hdc1
title Microsoft Windows XP Professionnel
root (hd0,0)
savedefault
chainloader +1
et modifie le comme ça:
title Microsoft Windows XP Professionnel
root (hd1,0)
savedefault
makeactive
map (hd0) (hd1)
map (hd1) (hd0)
chainloader +1
fais cette commande:
sudo update-grub
et tu peux laisser le disk linux en premier dans le bios tu pourras choisir xp dans le menu de démarrage sans qu'il t'insulte!
c'est bizarre tes disk sont compter a partir de hdc et pas hda, m'enfin ça a l'air de marcher quand même!
Dernière modification par willy78 (Le 22/02/2008, à 17:07)
Quelques tutos pour le wifi sous Ubuntu:
http://wlety.free.fr/forum
Hors ligne
#22 Le 22/02/2008, à 17:11
- our@nos
Re : installer clé wifi (résolu)
ok merci
Hors ligne
#23 Le 22/02/2008, à 17:28
- our@nos
Re : installer clé wifi (résolu)
sinon pour la clé j'arrive pas a entrer sur le bureau a partir du terminal, c quoi la commande pour aller chercher les pilotes ?
Hors ligne
#24 Le 22/02/2008, à 17:30
- our@nos
Re : installer clé wifi (résolu)
il reconnait pas la commande
cd Desktop/
Hors ligne
#25 Le 22/02/2008, à 17:35
- our@nos
Re : installer clé wifi (résolu)
en fait maintenant que j'ai mis le dossier sur le bureau je cherche comment recuperer les drivers à partir du terminal
Hors ligne