Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 22/03/2016, à 07:14

Lek1

Mate ne s'éteint pas sur un gigbyte brix

Bonjour,
j'ai un Gigabyte Brix GB-BXBT-2807 sur lequel j'ai installé Mate.
Tout c'est bien passé.
Cependant, lorsque je clique sur éteindre, le processus se met en route, l'écran devient noir,
le logo d'extinction apparaît et là, ça devrait s'éteindre. Mais il ne se passe rien.
Ça reste sur le logo et suis obligé d'appuyer sur bouton de la boite pour éteindre.
Il n'y a rien dans le bios qui puisse m'aider.
Des idées ? De l'aide...
Merci.


"Ceux qui ne bougent pas ne sentent pas leurs chaînes." (Rosa Luxemburg)   
Debian 11

Hors ligne

#2 Le 22/03/2016, à 08:15

malbo

Re : Mate ne s'éteint pas sur un gigbyte brix

Je te prie de faire un Boot-Info et de donner l'URL de ce Boot-Info dans ta réponse.

Hors ligne

#3 Le 22/03/2016, à 08:20

grandtoubab

Re : Mate ne s'éteint pas sur un gigbyte brix

Salut,
Essayer avec la commande

systemctl poweroff

Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....

Hors ligne

#4 Le 22/03/2016, à 08:33

Lek1

Re : Mate ne s'éteint pas sur un gigbyte brix

malbo a écrit :

Je te prie de faire un Boot-Info et de donner l'URL de ce Boot-Info dans ta réponse.

Merci de me répondre.
Voilà : Boot info


"Ceux qui ne bougent pas ne sentent pas leurs chaînes." (Rosa Luxemburg)   
Debian 11

Hors ligne

#5 Le 22/03/2016, à 08:38

Lek1

Re : Mate ne s'éteint pas sur un gigbyte brix

grandtoubab a écrit :

Salut,
Essayer avec la commande

systemctl poweroff

Merci pour ta réponse.
La commande retourne : systemctl poweroff
systemctl : commande introuvable


"Ceux qui ne bougent pas ne sentent pas leurs chaînes." (Rosa Luxemburg)   
Debian 11

Hors ligne

#6 Le 22/03/2016, à 08:58

malbo

Re : Mate ne s'éteint pas sur un gigbyte brix

Ton Boot-Info est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 9Feb2015]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Linux Mint 17.3 Rosa 
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda3: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048    27,539,455    27,537,408  83 Linux
/dev/sda2          27,539,456    31,543,295     4,003,840  82 Linux swap / Solaris
/dev/sda3          31,543,296   234,440,703   202,897,408  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        3249b61c-be4b-4e4e-9d86-bba395a32a3c   ext4       
/dev/sda2        42d90a76-a1f7-43f8-83b0-f542b16145ae   swap       
/dev/sda3        8d51bb66-1dc6-4ceb-8672-47ee2ca33c03   ext4       
/dev/zram0       98550cc5-cded-497d-b21e-bfa29e0ceb7f   swap       
/dev/zram1       90bb8e56-bf64-4236-8012-c6a2630314de   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Mar 22 08:29 ata-SanDisk_SDSSDA120G_155156405663 -> ../../sda
lrwxrwxrwx 1 root root 10 Mar 22 08:19 ata-SanDisk_SDSSDA120G_155156405663-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Mar 22 08:19 ata-SanDisk_SDSSDA120G_155156405663-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Mar 22 08:19 ata-SanDisk_SDSSDA120G_155156405663-part3 -> ../../sda3
lrwxrwxrwx 1 root root  9 Mar 22 08:29 wwn-0x5001b44f2b9fd99f -> ../../sda
lrwxrwxrwx 1 root root 10 Mar 22 08:19 wwn-0x5001b44f2b9fd99f-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Mar 22 08:19 wwn-0x5001b44f2b9fd99f-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Mar 22 08:19 wwn-0x5001b44f2b9fd99f-part3 -> ../../sda3

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /                        ext4       (rw,noatime,errors=remount-ro)
/dev/sda3        /home                    ext4       (rw,noatime)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3249b61c-be4b-4e4e-9d86-bba395a32a3c
else
  search --no-floppy --fs-uuid --set=root 3249b61c-be4b-4e4e-9d86-bba395a32a3c
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_mint_theme ###
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
### END /etc/grub.d/06_mint_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Linux Mint 17.3 MATE 64-bit' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3249b61c-be4b-4e4e-9d86-bba395a32a3c' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3249b61c-be4b-4e4e-9d86-bba395a32a3c
	else
	  search --no-floppy --fs-uuid --set=root 3249b61c-be4b-4e4e-9d86-bba395a32a3c
	fi
	linux	/boot/vmlinuz-3.19.0-32-generic root=UUID=3249b61c-be4b-4e4e-9d86-bba395a32a3c ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.19.0-32-generic
}
submenu 'Options avancées pour Linux Mint 17.3 MATE 64-bit' $menuentry_id_option 'gnulinux-advanced-3249b61c-be4b-4e4e-9d86-bba395a32a3c' {
	menuentry 'Linux Mint 17.3 MATE 64-bit, avec Linux 3.19.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-32-generic-advanced-3249b61c-be4b-4e4e-9d86-bba395a32a3c' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3249b61c-be4b-4e4e-9d86-bba395a32a3c
		else
		  search --no-floppy --fs-uuid --set=root 3249b61c-be4b-4e4e-9d86-bba395a32a3c
		fi
		echo	'Chargement de Linux 3.19.0-32-generic…'
		linux	/boot/vmlinuz-3.19.0-32-generic root=UUID=3249b61c-be4b-4e4e-9d86-bba395a32a3c ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.19.0-32-generic
	}
	menuentry 'Linux Mint 17.3 MATE 64-bit, with Linux 3.19.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-32-generic-recovery-3249b61c-be4b-4e4e-9d86-bba395a32a3c' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3249b61c-be4b-4e4e-9d86-bba395a32a3c
		else
		  search --no-floppy --fs-uuid --set=root 3249b61c-be4b-4e4e-9d86-bba395a32a3c
		fi
		echo	'Chargement de Linux 3.19.0-32-generic…'
		linux	/boot/vmlinuz-3.19.0-32-generic root=UUID=3249b61c-be4b-4e4e-9d86-bba395a32a3c ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.19.0-32-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3249b61c-be4b-4e4e-9d86-bba395a32a3c
	else
	  search --no-floppy --fs-uuid --set=root 3249b61c-be4b-4e4e-9d86-bba395a32a3c
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3249b61c-be4b-4e4e-9d86-bba395a32a3c
	else
	  search --no-floppy --fs-uuid --set=root 3249b61c-be4b-4e4e-9d86-bba395a32a3c
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=3249b61c-be4b-4e4e-9d86-bba395a32a3c /               ext4    noatime,errors=remount-ro 0       1
# /home was on /dev/sda3 during installation
UUID=8d51bb66-1dc6-4ceb-8672-47ee2ca33c03 /home           ext4    noatime,defaults        0       2
# swap was on /dev/sda2 during installation
UUID=42d90a76-a1f7-43f8-83b0-f542b16145ae none            swap    sw              0       0

tmpfs      /tmp            tmpfs        defaults,size=1g           0    0
tmpfs    /home/utilisateur64/.cache    tmpfs    defaults,size=1g    0    0
--------------------------------------------------------------------------------

=============================== StdErr Messages: ===============================

cat: write error: Broken pipe
File descriptor 9 (/proc/3636/mounts) leaked on lvs invocation. Parent PID 10588: bash
File descriptor 63 (pipe:[26909]) leaked on lvs invocation. Parent PID 10588: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-info 2016-03-22__08h29 ===================
boot-info version : 4ppa35
boot-sav version : 4ppa35
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version :
File descriptor 9 (/proc/3636/mounts) leaked on lvs invocation. Parent PID 5243: /bin/sh
No volume groups found
boot-info is executed in installed-session (Linux Mint 17.3 Rosa, rosa, LinuxMint, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.19.0-32-generic root=UUID=3249b61c-be4b-4e4e-9d86-bba395a32a3c ro quiet splash vt.handoff=7

=================== os-prober:
/dev/disk/by-uuid/3249b61c-be4b-4e4e-9d86-bba395a32a3c:L'OS actuellement utilisé - Linux Mint 17.3 Rosa CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="3249b61c-be4b-4e4e-9d86-bba395a32a3c" TYPE="ext4"
/dev/sda2: UUID="42d90a76-a1f7-43f8-83b0-f542b16145ae" TYPE="swap"
/dev/sda3: UUID="8d51bb66-1dc6-4ceb-8672-47ee2ca33c03" TYPE="ext4"
/dev/zram0: UUID="98550cc5-cded-497d-b21e-bfa29e0ceb7f" TYPE="swap"
/dev/zram1: UUID="90bb8e56-bf64-4236-8012-c6a2630314de" TYPE="swap"

disk/by-uuid/3249b61c-be4b-4e4e-9d86-bba395a32a3c (sda) has unknown type. Veuillez indiquer ce message à boot.repair@gmail.com

1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Linux not detected by os-prober on sda1. Veuillez indiquer ce message à boot.repair@gmail.com

=================== //etc/grub.d/ :
drwxr-xr-x  2 root          root            4096 mars  22 08:19 grub.d
total 92
-rwxr-xr-x 1 root root  9791 déc.  17 16:00 00_header
-rwxr-xr-x 1 root root  6058 mai   13  2015 05_debian_theme
-rwxr-xr-x 1 root root  1180 oct.  25  2014 06_mint_theme
-rwxr-xr-x 1 root root 11616 mars  22 08:19 10_linux
-rwxr-xr-x 1 root root 10634 oct.   1  2012 10_lupin
-rwxr-xr-x 1 root root 10412 juin  26  2015 20_linux_xen
-rwxr-xr-x 1 root root  1992 mars  12  2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin  26  2015 30_os-prober
-rwxr-xr-x 1 root root  1416 juin  26  2015 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juin  26  2015 40_custom
-rwxr-xr-x 1 root root   216 juin  26  2015 41_custom
-rw-r--r-- 1 root root   483 juin  26  2015 README




=================== //etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
EFI in dmesg.
[    0.000000] ACPI: UEFI 0x00000000B96C4768 000042 (v01 ALASKA A M I    00000000      00000000)
[    2.075455] fb0: EFI VGA frame buffer device
[    3.361049] fb: switching to inteldrmfb from EFI VGA
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	/.
sda3	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/home.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA SanDisk SDSSDA12 (scsi)
Disk /dev/sda: 120GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system     Flags
1      1049kB  14.1GB  14.1GB  primary  ext4            boot
2      14.1GB  16.2GB  2050MB  primary  linux-swap(v1)
3      16.2GB  120GB   104GB   primary  ext4


Error: /dev/zram0: unrecognised disk label

Error: /dev/zram1: unrecognised disk label

=================== parted -lm:

BYT;
/dev/sda:120GB:scsi:512:512:msdos:ATA SanDisk SDSSDA12;
1:1049kB:14.1GB:14.1GB:ext4::boot;
2:14.1GB:16.2GB:2050MB:linux-swap(v1)::;
3:16.2GB:120GB:104GB:ext4::;

Error: /dev/zram0: unrecognised disk label

Error: /dev/zram1: unrecognised disk label

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sda   disk        111,8G
sda1  part ext4    13,1G
sda2  part swap     1,9G
sda3  part ext4    96,8G
zram0 disk swap   961,7M
zram1 disk swap   961,7M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      0  0  0 running
sda1     0  0  0         /
sda2     0  0  0         [SWAP]
sda3     0  0  0         /home
zram0    0  0  0         [SWAP]
zram1    0  0  0         [SWAP]


=================== mount:
/dev/sda1 on / type ext4 (rw,noatime,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /tmp type tmpfs (rw,size=1g)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda3 on /home type ext4 (rw,noatime)
tmpfs on /home/utilisateur64/.cache type tmpfs (rw,size=1g)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=utilisateur64)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 input kmsg kvm log mapper mcelog mei0 mem memory_bandwidth net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sg0 shm snapshot snd stderr stdin stdout uhid uinput urandom vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper:  control

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G  8.0K  1.9G   1% /dev
tmpfs          tmpfs     385M  1.3M  384M   1% /run
/dev/sda1      ext4       13G  6.5G  5.7G  54% /
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs     1.0G   28K  1.0G   1% /tmp
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     1.9G   80K  1.9G   1% /run/shm
none           tmpfs     100M   28K  100M   1% /run/user
/dev/sda3      ext4       96G  198M   92G   1% /home
tmpfs          tmpfs     1.0G   11M 1014M   1% /home/utilisateur64/.cache

=================== fdisk -l:

Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00012ee9

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048    27539455    13768704   83  Linux
/dev/sda2        27539456    31543295     2001920   82  Linux swap / Solaris
/dev/sda3        31543296   234440703   101448704   83  Linux




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s


=================== Blockers in case of suggested repair
Veuillez utiliser ce logiciel dans une session-live (live-CD ou live-USB). Cela vous permettra d'utiliser cette fonctionnalité.


=================== User settings
The settings chosen by the user will not act on the boot.




pastebinit  packages needed
debconf: Impossible d'initialiser l'interface : Dialog
debconf: (L'interface dialog ne fonctionnera pas avec un terminal rustique (« dumb »), un tampon shell d'Emacs ou sans terminal de contrôle.)
debconf: Utilisation de l'interface Readline en remplacement
debconf: Impossible d'initialiser l'interface : Readline
debconf: (Cette interface a besoin d'un terminal de contrôle.)
debconf: Utilisation de l'interface Teletype en remplacement
dpkg-preconfigure: impossible de réouvrir stdin :

Je ne vois pas d'anomalie dans ce Boot-Info.
Tu demandes dans le post #1 s'il n'y a pas quelque chose à modifier dans le "Bios" pour résoudre ton souci d'arrêt impossible : pour moi, il n'y a rien à modifier dans le "Bios" qui puisse agir là-dessus mais je peux me tromper. Assez souvent quand il y a un souci d'arrêt impossible, c'est la gestion de l'affichage qui est en cause. Peut-être que tu pourrais essayer d'agir au niveau de l'écran : remplacer ton écran actuel par un autre (provisoirement) pour vérifier si ça ne résoudrait pas le problème.
Pourrais-tu vérifier également si tu as le même souci d'arrêt impossible après une session live (ordi démarré sur une LiveUSB Ubuntu, choix "Essayer Ubuntu) ?

EDIT : au cas où tu ne l'aurais pas vue, je te signale cette discussion initiée par vinsse qui a le même modèle d'ordi (Gigabyte Brix GB-BXBT-2807) que toi : https://forum.ubuntu-fr.org/viewtopic.php?id=1987170
mais pas le même problème que toi apparemment : toi, c'est l'extinction qui merdouille, lui c'est le démarrage...cela dit, vous n'avez pas la même version installée (toi, c'est le noyau 3.19.0-x alors que lui c'est le noyau 3.13.0-x)

Dernière modification par malbo (Le 22/03/2016, à 09:08)

Hors ligne

#7 Le 22/03/2016, à 09:37

Lek1

Re : Mate ne s'éteint pas sur un gigbyte brix

malbo a écrit :

Ton Boot-Info est là :

Je ne vois pas d'anomalie dans ce Boot-Info.
Tu demandes dans le post #1 s'il n'y a pas quelque chose à modifier dans le "Bios" pour résoudre ton souci d'arrêt impossible : pour moi, il n'y a rien à modifier dans le "Bios" qui puisse agir là-dessus mais je peux me tromper. Assez souvent quand il y a un souci d'arrêt impossible, c'est la gestion de l'affichage qui est en cause. Peut-être que tu pourrais essayer d'agir au niveau de l'écran : remplacer ton écran actuel par un autre (provisoirement) pour vérifier si ça ne résoudrait pas le problème.
Pourrais-tu vérifier également si tu as le même souci d'arrêt impossible après une session live (ordi démarré sur une LiveUSB Ubuntu, choix "Essayer Ubuntu) ?

EDIT : au cas où tu ne l'aurais pas vue, je te signale cette discussion initiée par vinsse qui a le même modèle d'ordi (Gigabyte Brix GB-BXBT-2807) que toi : https://forum.ubuntu-fr.org/viewtopic.php?id=1987170
mais pas le même problème que toi apparemment : toi, c'est l'extinction qui merdouille, lui c'est le démarrage...cela dit, vous n'avez pas la même version installée (toi, c'est le noyau 3.19.0-x alors que lui c'est le noyau 3.13.0-x)

OK, j'ai changé d'écran. J'en ai deux, donc ça tombe bien.
Même souci.

Je teste la live/clef.
C'est pareil. le pc ne s'éteint pas.
Testé avec : ubuntu, linuxmint mate, linuxmint kde et xfce. J'ai tout ça sur multisystème.
Curieusement, avec trisquel 7 le pc s'éteint.

Je précise que les systèmes s'éteignent sur d'autres pcs avec cette clef multisystème.


"Ceux qui ne bougent pas ne sentent pas leurs chaînes." (Rosa Luxemburg)   
Debian 11

Hors ligne

#8 Le 22/03/2016, à 09:40

grandtoubab

Re : Mate ne s'éteint pas sur un gigbyte brix

Lek1 a écrit :
grandtoubab a écrit :

Salut,
Essayer avec la commande

systemctl poweroff

Merci pour ta réponse.
La commande retourne : systemctl poweroff
systemctl : commande introuvable

Tu utilises donc une "vieille" version sans systemd


Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....

Hors ligne

#9 Le 22/03/2016, à 10:06

malbo

Re : Mate ne s'éteint pas sur un gigbyte brix

grandtoubab a écrit :

Tu utilises donc une "vieille" version sans systemd

Il utilise Mint Mate 17.3 (d'après ce post). On peut voir ici que cette version est basée sur Ubuntu 14.04.3, laquelle n'est pas équipée de Systemd (aucune version de Trusty n'est et ne sera équipée de Systemd).

Dernière modification par malbo (Le 22/03/2016, à 10:07)

Hors ligne

#10 Le 22/03/2016, à 10:07

Lek1

Re : Mate ne s'éteint pas sur un gigbyte brix

grandtoubab a écrit :
Lek1 a écrit :
grandtoubab a écrit :

Salut,
Essayer avec la commande

systemctl poweroff

Merci pour ta réponse.
La commande retourne : systemctl poweroff
systemctl : commande introuvable

Tu utilises donc une "vieille" version sans systemd

Vieille !
C'est la 14.04, c'est trop vieux ?


"Ceux qui ne bougent pas ne sentent pas leurs chaînes." (Rosa Luxemburg)   
Debian 11

Hors ligne

#11 Le 22/03/2016, à 10:08

malbo

Re : Mate ne s'éteint pas sur un gigbyte brix

Je viens de répondre pour toi dans le post #9

Hors ligne

#12 Le 22/03/2016, à 11:40

Lek1

Re : Mate ne s'éteint pas sur un gigbyte brix

malbo a écrit :

Je viens de répondre pour toi dans le post #9

oui, c'était doublon. lol


"Ceux qui ne bougent pas ne sentent pas leurs chaînes." (Rosa Luxemburg)   
Debian 11

Hors ligne

#13 Le 22/03/2016, à 12:01

grandtoubab

Re : Mate ne s'éteint pas sur un gigbyte brix

donc essayer

poweroff

il doit bien y avoir un alias/lien  pour déclencher la commande  big_smile


Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....

Hors ligne

#14 Le 22/03/2016, à 12:08

erresse

Re : Mate ne s'éteint pas sur un gigbyte brix

Bonjour,

Pour éteindre la machine, le cas échéant, je fais en terminal :

sudo halt

Mais ce n'est pas une solution de passer en terminal pour fermer son ordi...


Plus de 50 ans d'informatique, ça en fait des lignes de commandes en console, mais on n'avait pas le choix...
Excellente raison pour, aujourd'hui qu'on le peut, utiliser au maximum les INTERFACES GRAPHIQUES !
Important : Une fois résolu, pensez à clore votre sujet en ajoutant [Résolu] devant le titre du 1er message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Hors ligne

#15 Le 22/03/2016, à 12:10

moko138

Re : Mate ne s'éteint pas sur un gigbyte brix

malbo a écrit :

Il utilise Mint Mate 17.3 (d'après ce post). On peut voir ici que cette version est basée sur Ubuntu 14.04.3, laquelle n'est pas équipée de Systemd (aucune version de Trusty n'est et ne sera équipée de Systemd).

Il faut nuancer :
Ayant installé une 14.04.1, les simples mises à jour en ont fait

lsb_release -d; uname -mr
Description:	Ubuntu 14.04.4 LTS
3.13.0-79-generic i686

et pourtant en février dernier, systemd a été (en partie ?) installé :

dpkg -l | grep systemd
ii  libpam-systemd:i386                        204-5ubuntu20.18                        i386         system and service manager - PAM module
ii  libsystemd-daemon0:i386                    204-5ubuntu20.18                        i386         systemd utility library
ii  libsystemd-login0:i386                     204-5ubuntu20.18                        i386         systemd login utility library
ii  systemd-services                           204-5ubuntu20.18                        i386         systemd runtime services
ii  systemd-shim                               6-2bzr1                                 i386         shim for systemd

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#16 Le 22/03/2016, à 12:10

Lek1

Re : Mate ne s'éteint pas sur un gigbyte brix

grandtoubab a écrit :

donc essayer

poweroff

il doit bien y avoir un alias/lien  pour déclencher la commande  big_smile

J'ai lancé en root : sudo poweroff
Ça c'est déclenché, mais il ne s'éteint pas.

Merci


"Ceux qui ne bougent pas ne sentent pas leurs chaînes." (Rosa Luxemburg)   
Debian 11

Hors ligne

#17 Le 22/03/2016, à 12:41

grandtoubab

Re : Mate ne s'éteint pas sur un gigbyte brix

Redémarre sans l'option quiet dans GRUB.
Tu auras peut être des messages sur l'ecran


Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....

Hors ligne

#18 Le 22/03/2016, à 14:27

lynn

Re : Mate ne s'éteint pas sur un gigbyte brix

Bonjour,

Pour éteindre sans passer par sudo:

dbus-send --system --print-reply --dest="org.freedesktop.ConsoleKit" /org/freedesktop/ConsoleKit/Manager org.freedesktop.ConsoleKit.Manager.Stop

«C'est pas parce qu'ils sont nombreux à avoir tort qu'ils ont raison!»

Coluche

Hors ligne

#19 Le 22/03/2016, à 15:59

malbo

Re : Mate ne s'éteint pas sur un gigbyte brix

@moko138 : je viens de le revérifier sur une install de Ubuntu 14.04.1 et une install plus récente Ubuntu 14.04.4 : Systemd n'est pas utilisé malgré que certains paquets dont le nom contient "systemd" sont effectivement installés comme tu l'as fait remarquer dans le post #15. J'ai trouvé une astuce pour vérifier si Ubuntu a été démarrée avec Systemd ou non : il suffit de passer la commande suivante dans un terminal (elle affiche la commande dont le PID est 1) :

top -p1 

Le résultat affiche la commande systemd si Ubuntu a bien été démarré avec systemd, sinon c'est autre chose qui s'affiche.
Exemple dans le cas de Vivid (Ubuntu 15.04) avec le démarrage par défaut de Grub (*) :

~$ top -p1

top - 15:56:23 up 14 min,  2 users,  load average: 0,05, 0,23, 0,28
Tasks:   1 total,   0 running,   1 sleeping,   0 stopped,   0 zombie
%Cpu(s):  6,2 us,  0,6 sy,  0,0 ni, 93,3 id,  0,0 wa,  0,0 hi,  0,0 si,  0,0 st
KiB Mem:   4047400 total,  1279740 used,  2767660 free,    63448 buffers
KiB Swap: 11325780 total,        0 used, 11325780 free.   621204 cached Mem

  PID USER      PR  NI    VIRT    RES    SHR S  %CPU %MEM     TIME+ COMMAND    
    1 root      20   0  182528   4992   3460 S   0,0  0,1   0:01.41 systemd   

Dans le cas de Ubuntu 14.04 (quelle que soit la version : 14.04.1 ou 14.04.4), ce n'est donc pas "systemd" qui apparaît mais la commande "init" :

~$ top -p1

top - 16:10:26 up 1 min,  2 users,  load average: 1,14, 0,40, 0,14
Tasks:   1 total,   0 running,   1 sleeping,   0 stopped,   0 zombie
%Cpu(s):  1,5 us,  0,6 sy,  0,0 ni, 97,8 id,  0,2 wa,  0,0 hi,  0,0 si,  0,0 st
KiB Mem:   4047380 total,   695788 used,  3351592 free,    57532 buffers
KiB Swap: 11325780 total,        0 used, 11325780 free.   299848 cached Mem

  PID USER      PR  NI    VIRT    RES    SHR S  %CPU %MEM     TIME+ COMMAND     
    1 root      20   0   33880   4276   2548 S   0,0  0,1   0:01.98 init 

(*) si on sélectionne l'entrée upstart dans les "Options avancées pour Ubuntu" de Vivid, c'est la commande "upstart" qui résultera de la commande "top -p1"

Dernière modification par malbo (Le 22/03/2016, à 16:19)

Hors ligne

#20 Le 22/03/2016, à 16:44

grandtoubab

Re : Mate ne s'éteint pas sur un gigbyte brix

on peut aussi verifier comm ça:

grandtoubab@desktop:~$ ls -alrt /sbin/init
lrwxrwxrwx 1 root root 20 mars  14 04:46 /sbin/init -> /lib/systemd/systemd

Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....

Hors ligne

#21 Le 22/03/2016, à 17:55

malbo

Re : Mate ne s'éteint pas sur un gigbyte brix

grandtoubab a écrit :

on peut aussi verifier comm ça:

grandtoubab@desktop:~$ ls -alrt /sbin/init
lrwxrwxrwx 1 root root 20 mars  14 04:46 /sbin/init -> /lib/systemd/systemd

Non, ça ne marche pas. Je fais l'essai suivant en démarrant sur l'entrée upstart (dans les options avancées du menu Grub) d'une install Ubuntu 15.10 :

~$ ls -alrt /sbin/init
lrwxrwxrwx 1 root root 20 janv. 27 16:23 /sbin/init -> /lib/systemd/systemd
~$ 
~$ top -p1

top - 16:52:38 up 6 min,  2 users,  load average: 0,10, 0,27, 0,17
Tasks:   1 total,   0 running,   1 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0,1 us,  0,1 sy,  0,0 ni, 99,8 id,  0,0 wa,  0,0 hi,  0,0 si,  0,0 st
KiB Mem:   4047180 total,  1310600 used,  2736580 free,   208024 buffers
KiB Swap: 11325780 total,        0 used, 11325780 free.   466320 cached Mem

  PID USER      PR  NI    VIRT    RES    SHR S  %CPU %MEM     TIME+ COMMAND     
    1 root      20   0   39372   4472   2764 S   0,0  0,1   0:01.92 upstart

Dernière modification par malbo (Le 22/03/2016, à 17:57)

Hors ligne

#22 Le 22/03/2016, à 18:08

grandtoubab

Re : Mate ne s'éteint pas sur un gigbyte brix

malbo a écrit :
grandtoubab a écrit :

on peut aussi verifier comm ça:

grandtoubab@desktop:~$ ls -alrt /sbin/init
lrwxrwxrwx 1 root root 20 mars  14 04:46 /sbin/init -> /lib/systemd/systemd

Non, ça ne marche pas. Je fais l'essai suivant en démarrant sur l'entrée upstart (dans les options avancées du menu Grub) d'une install Ubuntu 15.10 :

~$ ls -alrt /sbin/init
lrwxrwxrwx 1 root root 20 janv. 27 16:23 /sbin/init -> /lib/systemd/systemd
~$ 
~$ top -p1

top - 16:52:38 up 6 min,  2 users,  load average: 0,10, 0,27, 0,17
Tasks:   1 total,   0 running,   1 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0,1 us,  0,1 sy,  0,0 ni, 99,8 id,  0,0 wa,  0,0 hi,  0,0 si,  0,0 st
KiB Mem:   4047180 total,  1310600 used,  2736580 free,   208024 buffers
KiB Swap: 11325780 total,        0 used, 11325780 free.   466320 cached Mem

  PID USER      PR  NI    VIRT    RES    SHR S  %CPU %MEM     TIME+ COMMAND     
    1 root      20   0   39372   4472   2764 S   0,0  0,1   0:01.92 upstart

ok.
un truc sympa;: pstree

@desktop:~$ pstree -p
systemd(1)─┬─NetworkManager(682)─┬─dhclient(1059)
           │                     ├─{NetworkManager}(798)
           │                     ├─{gdbus}(1023)
           │                     └─{gmain}(1022)
           ├─SystemToolsBack(2695)
           ├─accounts-daemon(674)─┬─{gdbus}(782)
           │                      └─{gmain}(712)
           ├─agetty(912)
           ├─applet.py(4795)───{gmain}(4831)
           ├─at-spi-bus-laun(4666)─┬─dbus-daemon(4670)
           │                       ├─{dconf worker}(4667)
           │                       ├─{gdbus}(4669)
           │                       └─{gmain}(4671)
           ├─at-spi-bus-laun(4801)─┬─dbus-daemon(4813)
           │                       ├─{dconf worker}(4805)
           │                       ├─{gdbus}(4809)
           │                       └─{gmain}(4814)
           ├─at-spi2-registr(4673)───{gdbus}(4674)
           ├─at-spi2-registr(4818)───{gdbus}(4827)
           ├─atd(678)
           ├─atop(737)
           ├─avahi-daemon(697)───avahi-daemon(724)
           ├─colord(1048)─┬─{gdbus}(1052)
           │              └─{gmain}(1053)
           ├─cron(677)
           ├─cups-browsed(788)
           ├─cupsd(787)
           ├─dbus-daemon(700)
           ├─dbus-daemon(4664)
           ├─dbus-daemon(4735)
           ├─dbus-launch(4663)
           ├─dbus-launch(4734)
           ├─exim4(1047)
           ├─firefox(5365)─┬─Web Content(5414)─┬─{BgHangManager}(5431)
           │               │                   ├─{Chrome_ChildThr}(5416)
           │               │                   ├─{Hang Monitor}(5430)
           │               │                   ├─{ImageBridgeChil}(5441)
           │               │                   ├─{ImageIO}(5440)
           │               │                   ├─{ImgDecoder #1}(5438)
           │               │                   ├─{ImgDecoder #2}(5439)
           │               │                   ├─{JS Helper}(5423)
           │               │                   ├─{JS Helper}(5424)
           │               │                   ├─{JS Helper}(5425)
           │               │                   ├─{JS Helper}(5426)
           │               │                   ├─{JS Helper}(5427)
           │               │                   ├─{JS Helper}(5428)
           │               │                   ├─{JS Watchdog}(5422)
           │               │                   ├─{ProcessHangMoni}(5442)
           │               │                   ├─{Socket Thread}(5429)
           │               │                   ├─{Timer}(5433)
           │               │                   └─{gdbus}(5443)
           │               ├─{BgHangManager}(5380)
           │               ├─{Cache I/O}(5410)
           │               ├─{Cache2 I/O}(5382)
           │               ├─{Cert Verify}(5385)
           │               ├─{Compositor}(5396)
           │               ├─{DNS Resolver #3}(5458)
           │               ├─{DNS Resolver #4}(5498)
           │               ├─{DNS Resolver #5}(5499)
           │               ├─{DOM Worker}(5399)
           │               ├─{DOM Worker}(5402)
           │               ├─{DOM Worker}(5460)
           │               ├─{GMPThread}(5387)
           │               ├─{Gecko_IOThread}(5368)
           │               ├─{Hang Monitor}(5379)
           │               ├─{IPDL Background}(5388)
           │               ├─{ImageBridgeChil}(5397)
           │               ├─{ImageIO}(5395)
           │               ├─{ImgDecoder #1}(5393)
           │               ├─{ImgDecoder #2}(5394)
           │               ├─{JS Helper}(5373)
           │               ├─{JS Helper}(5374)
           │               ├─{JS Helper}(5375)
           │               ├─{JS Helper}(5376)
           │               ├─{JS Helper}(5377)
           │               ├─{JS Helper}(5378)
           │               ├─{JS Watchdog}(5372)
           │               ├─{Link Monitor}(5370)
           │               ├─{ProcessHangMoni}(5417)
           │               ├─{Proxy R~olution}(5435)
           │               ├─{Socket Thread}(5371)
           │               ├─{SoftwareVsyncTh}(5398)
           │               ├─{Timer}(5383)
           │               ├─{URL Classifier}(5407)
           │               ├─{dconf worker}(5434)
           │               ├─{firefox}(5384)
           │               ├─{firefox}(5413)
           │               ├─{gdbus}(5381)
           │               ├─{gmain}(5409)
           │               ├─{localStorage DB}(5411)
           │               ├─{mozStorage #1}(5408)
           │               ├─{mozStorage #2}(5412)
           │               ├─{mozStorage #3}(5418)
           │               ├─{mozStorage #4}(5432)
           │               ├─{mozStorage #5}(5445)
           │               ├─{mozStorage #6}(5446)
           │               └─{mozStorage #7}(5495)
           ├─gconfd-2(4854)
           ├─gnome-keyring-d(4695)─┬─{dconf worker}(4775)
           │                       ├─{gdbus}(4780)
           │                       ├─{gmain}(4696)
           │                       └─{timer}(4773)
           ├─gpg-agent(4752)
           ├─gvfs-afc-volume(4884)─┬─{gdbus}(4887)
           │                       └─{gvfs-afc-volume}(4885)
           ├─gvfs-goa-volume(4880)───{gdbus}(4881)
           ├─gvfs-gphoto2-vo(4876)───{gdbus}(4878)
           ├─gvfs-mtp-volume(4872)───{gdbus}(4874)
           ├─gvfs-udisks2-vo(4865)─┬─{gdbus}(4866)
           │                       └─{gmain}(4867)
           ├─gvfsd(4802)───{gdbus}(4804)
           ├─gvfsd-trash(4836)─┬─{gdbus}(4839)
           │                   ├─{gmain}(4841)
           │                   ├─{pool}(4846)
           │                   └─{pool}(4848)
           ├─light-locker(4782)───{gdbus}(4840)
           ├─lightdm(868)─┬─Xorg(4645)───{Xorg}(4646)
           │              ├─lightdm(4684)─┬─sh(4697)───xfce4-session(4745)─┬─Th+
           │              │               │                                ├─xf+
           │              │               │                                ├─xf+
           │              │               │                                ├─xf+
           │              │               │                                ├─{g+
           │              │               │                                └─{g+
           │              │               └─{gdbus}(4685)
           │              ├─{gdbus}(1025)
           │              └─{gmain}(1032)
           ├─minidlnad(1054)───{minidlnad}(1058)
           ├─mount.ntfs(416)
           ├─my-weather-indi(4763)───{gdbus}(4896)
           ├─nm-applet(4789)─┬─{dconf worker}(4844)
           │                 └─{gdbus}(4828)
           ├─ntpd(742)
           ├─polkit-gnome-au(4769)───{gdbus}(4829)
           ├─polkitd(796)─┬─{gdbus}(1017)
           │              └─{gmain}(1033)
           ├─pulseaudio(4822)─┬─{alsa-sink-ALC88}(4824)
           │                  └─{alsa-source-ALC}(4825)
           ├─rpc.idmapd(662)
           ├─rpc.statd(622)
           ├─rpcbind(597)
           ├─rsyslogd(784)─┬─{in:imklog}(1028)
           │               ├─{in:imuxsock}(1027)
           │               └─{rs:main Q:Reg}(1029)
           ├─rtkit-daemon(1312)─┬─{rtkit-daemon}(1316)
           │                    └─{rtkit-daemon}(1317)
           ├─smart-notifier(4786)
           ├─smartd(685)
           ├─start-pulseaudi(4842)───xprop(4843)
           ├─system-tools-ba(2692)─┬─{gdbus}(2693)
           │                       └─{gmain}(2739)
           ├─systemd(1111)───(sd-pam)(1131)
           ├─systemd(4689)───(sd-pam)(4691)
           ├─systemd-journal(205)
           ├─systemd-logind(687)
           ├─systemd-udevd(177)
           ├─udisksd(1349)─┬─{cleanup}(1357)
           │               ├─{gdbus}(1352)
           │               ├─{gmain}(1350)
           │               └─{probing-thread}(1353)
           ├─upowerd(1246)─┬─{gdbus}(1271)
           │               └─{gmain}(1255)
           ├─xfce4-power-man(4761)───{gdbus}(4815)
           ├─xfce4-power-man(4787)
           ├─xfce4-terminal(5504)─┬─bash(5508)───pstree(5523)
           │                      ├─gnome-pty-helpe(5507)
           │                      ├─{gdbus}(5505)
           │                      └─{gmain}(5509)
           ├─xfce4-volumed(4792)─┬─{gdbus}(4851)
           │                     └─{task0}(4849)
           ├─xfconfd(4748)
           └─xfsettingsd(4759)─┬─{gdbus}(4798)
                               └─{gmain}(4810)

Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....

Hors ligne

#23 Le 22/03/2016, à 18:16

malbo

Re : Mate ne s'éteint pas sur un gigbyte brix

Oui, on dirait bien que ça marche avec la commande "pstree -p" ou tout simplement la commande "pstree"

Hors ligne

#24 Le 22/03/2016, à 18:38

Compte anonymisé

Re : Mate ne s'éteint pas sur un gigbyte brix

grandtoubab a écrit :

Redémarre sans l'option quiet dans GRUB.
Tu auras peut être des messages sur l'ecran

Je parie que les messages seront du genre
"A stop job is running for..." ou "kworker is blocked for more than x seconds" en boucle.
Il faudrait essayer en démarrant X en "manuel" une fois connecté en prompt, puis en se déconnectant pour retrouver le prompt et éteindre via poweroff.

#25 Le 23/03/2016, à 07:49

Lek1

Re : Mate ne s'éteint pas sur un gigbyte brix

erresse a écrit :

Bonjour,

Pour éteindre la machine, le cas échéant, je fais en terminal :

sudo halt

Mais ce n'est pas une solution de passer en terminal pour fermer son ordi...

sudo halt ne fonctionne pas.


"Ceux qui ne bougent pas ne sentent pas leurs chaînes." (Rosa Luxemburg)   
Debian 11

Hors ligne