#1 Le 14/10/2016, à 17:36
- sebastien29800
savoir à quel matériel appartient un ATA dans les messages log ?
bonjour à tous, j'ai un message d'erreur au démarrage.
comment savoir à quel matos correspond "ata7" ?
merci
exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
Oct 14 18:09:30 Pc-Principal-Linux kernel: [ 381.044248] ata7: irq_stat 0x00000040, connection status changed
Oct 14 18:09:30 Pc-Principal-Linux kernel: [ 381.044252] ata7: SError: { DevExch }
Oct 14 18:09:30 Pc-Principal-Linux kernel: [ 381.044260] ata7: limiting SATA link speed to 1.5 Gbps
Oct 14 18:09:30 Pc-Principal-Linux kernel: [ 381.044264] ata7: hard resetting link
Oct 14 18:09:31 Pc-Principal-Linux kernel: [ 381.772040] ata7: SATA link down (SStatus 0 SControl 310)
Oct 14 18:09:31 Pc-Principal-Linux kernel: [ 381.772057] ata7: EH completeDernière modification par sebastien29800 (Le 16/10/2016, à 14:34)
Hors ligne
#2 Le 16/10/2016, à 04:42
- moko138
Re : savoir à quel matériel appartient un ATA dans les messages log ?
prise Ata : connecteur de disque Sata
ata7 : prise Ata n°7
En général, ce genre de message reflète une mauvaise connexion entre un disque et la prise 7 sur la carte mère,
soit qu'il y ait de la poussière (cas le plus fréquent, qui se soigne avec l'aspirateur et une loupe) ou de l'oxydation dans les contacts,
soit que la nappe elle-même soit défectueuse (rare).
Je vois que cette erreur est signalée 6'21 après le lancement du noyau,
mais tu ne dis pas (???) si ton système arrive à fonctionner ou non...
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#3 Le 16/10/2016, à 08:07
- sebastien29800
Re : savoir à quel matériel appartient un ATA dans les messages log ?
bonjour,
merci de l’intérêt que tu portes à mon problème.
le système fonctionne parfaitement.
tu me parles de la prise #7 mais je n'ai que 4 prises SATA (3 connecteurs pris par des SSD et une pour un graveur de DVD)
ce problème bascule aléatoirement entre le "ata7" et le "ata5" lorsque je redémarre.
merci encore
Hors ligne
#4 Le 16/10/2016, à 08:59
- moko138
Re : savoir à quel matériel appartient un ATA dans les messages log ?
Toi, tu vois 4 prises physiques Sata ;
le système, lui, voit logiciellement, des prises Sata, dont une ata7.
La contradiction n'est qu'appparente.
Puisque "le système fonctionne parfaitement", tu as le choix entre t'en tenir là, et assouvir ta curiosité. 
Si tu veux continuer, je te propose de donner
cat /var/log/dmesg | head -n 1000et
sudo lshwcette dernière commande peut prendre une minute, donc patiente.
Il te faudra d'abord l'installer :
sudo apt-get install lshw%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#5 Le 16/10/2016, à 10:45
- sebastien29800
Re : savoir à quel matériel appartient un ATA dans les messages log ?
bonjour à tous, j'ai galéré mais j'ai enfin trouvé.
en façade avant de ma tour, j'ai un port serial ATA.
j'ai débranché le câble allant de celui-ci à la carte mère et fin des messages d'erreur !
c'est lui qui mettait le bazarre !!!
merci
Hors ligne
#6 Le 16/10/2016, à 11:42
- moko138
Re : savoir à quel matériel appartient un ATA dans les messages log ?
J'aimerais bien avoir un connecteur Sata externe !
Tu aurais pu commencer par passer l'aspirateur devant ta façade :
c'est plus rapide et, si ça suffit, ça te permet de brancher en Sata un disque sans ouvrir ta tour.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#7 Le 16/10/2016, à 13:26
- sebastien29800
Re : savoir à quel matériel appartient un ATA dans les messages log ?
merci moko138
le port est nickel, ça n'a rien changé !
reconnaissance au niveau du kernel peut etre .....
merci encore
Hors ligne
#8 Le 16/10/2016, à 14:00
- sebastien29800
Re : savoir à quel matériel appartient un ATA dans les messages log ?
rebonjour,
finalement le problème revient :
Oct 16 14:42:04 Pc-Principal-Linux kernel: [ 4848.994991] ata7: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
Oct 16 14:42:04 Pc-Principal-Linux kernel: [ 4848.994997] ata7: irq_stat 0x00000040, connection status changed
Oct 16 14:42:04 Pc-Principal-Linux kernel: [ 4848.995001] ata7: SError: { DevExch }
Oct 16 14:42:04 Pc-Principal-Linux kernel: [ 4848.995009] ata7: limiting SATA link speed to 1.5 Gbps
Oct 16 14:42:04 Pc-Principal-Linux kernel: [ 4848.995013] ata7: hard resetting link
Oct 16 14:42:05 Pc-Principal-Linux kernel: [ 4849.716044] ata7: SATA link down (SStatus 0 SControl 310)
Oct 16 14:42:05 Pc-Principal-Linux kernel: [ 4849.716064] ata7: EH complete
Oct 16 14:42:06 Pc-Principal-Linux kernel: [ 4850.698694] ata7: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
Oct 16 14:42:06 Pc-Principal-Linux kernel: [ 4850.698700] ata7: irq_stat 0x00000040, connection status changed
Oct 16 14:42:06 Pc-Principal-Linux kernel: [ 4850.698704] ata7: SError: { CommWake DevExch }
Oct 16 14:42:06 Pc-Principal-Linux kernel: [ 4850.698712] ata7: limiting SATA link speed to 1.5 Gbps
Oct 16 14:42:06 Pc-Principal-Linux kernel: [ 4850.698716] ata7: hard resetting link
Oct 16 14:42:07 Pc-Principal-Linux kernel: [ 4851.420036] ata7: SATA link down (SStatus 0 SControl 310)
Oct 16 14:42:07 Pc-Principal-Linux kernel: [ 4851.420054] ata7: EH complete
Oct 16 14:42:08 Pc-Principal-Linux kernel: [ 4852.203219] ata7: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
Oct 16 14:42:08 Pc-Principal-Linux kernel: [ 4852.203225] ata7: irq_stat 0x00000040, connection status changed
Oct 16 14:42:08 Pc-Principal-Linux kernel: [ 4852.203229] ata7: SError: { DevExch }
Oct 16 14:42:08 Pc-Principal-Linux kernel: [ 4852.203237] ata7: limiting SATA link speed to 1.5 Gbps
Oct 16 14:42:08 Pc-Principal-Linux kernel: [ 4852.203241] ata7: hard resetting link
Oct 16 14:42:08 Pc-Principal-Linux kernel: [ 4852.924052] ata7: SATA link down (SStatus 0 SControl 310)
Oct 16 14:42:08 Pc-Principal-Linux kernel: [ 4852.924070] ata7: EH complete
Oct 16 14:42:09 Pc-Principal-Linux kernel: [ 4853.923449] ata7: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
Oct 16 14:42:09 Pc-Principal-Linux kernel: [ 4853.923456] ata7: irq_stat 0x00000040, connection status changed
Oct 16 14:42:09 Pc-Principal-Linux kernel: [ 4853.923460] ata7: SError: { DevExch }
Oct 16 14:42:09 Pc-Principal-Linux kernel: [ 4853.923468] ata7: limiting SATA link speed to 1.5 Gbps
Oct 16 14:42:09 Pc-Principal-Linux kernel: [ 4853.923472] ata7: hard resetting link
Oct 16 14:42:10 Pc-Principal-Linux kernel: [ 4854.656055] ata7: SATA link down (SStatus 0 SControl 310)
Oct 16 14:42:10 Pc-Principal-Linux kernel: [ 4854.656074] ata7: EH completeje ne comprends vraiment pas !
ebastien@Pc-Principal-Linux:~$ cat /var/log/dmesg | head -n 1000
(Nothing has been logged yet.)
sebastien@Pc-Principal-Linux:~$ sudo lshw
pc-principal-linux
description: Ordinateur de Bureau
produit: P5K (To Be Filled By O.E.M.)
fabriquant: System manufacturer
version: System Version
numéro de série: System Serial Number
bits: 64 bits
fonctionnalités: smbios-2.4 dmi-2.4 vsyscall32
configuration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=401740A5-8DFE-D511-B3A2-001BFC8EA779
*-core
description: Carte mère
produit: P5K
fabriquant: ASUSTeK Computer INC.
identifiant matériel: 0
version: Rev 1.xx
numéro de série: MS6C77B31810342
emplacement: To Be Filled By O.E.M.
*-firmware
description: BIOS
fabriquant: American Megatrends Inc.
identifiant matériel: 0
version: 1201
date: 10/14/2008
taille: 64KiB
capacité: 960KiB
fonctionnalités: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu
description: CPU
produit: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
fabriquant: Intel Corp.
identifiant matériel: 4
information bus: cpu@0
version: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
numéro de série: To Be Filled By O.E.M.
emplacement: LGA775
taille: 1596MHz
capacité: 3800MHz
bits: 64 bits
horloge: 266MHz
fonctionnalités: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow vnmi flexpriority dtherm cpufreq
*-cache:0
description: L1 cache
identifiant matériel: 5
emplacement: L1-Cache
taille: 128KiB
capacité: 128KiB
fonctionnalités: internal write-back data
configuration: level=1
*-cache:1
description: L2 cache
identifiant matériel: 6
emplacement: L2-Cache
taille: 8MiB
capacité: 8MiB
fonctionnalités: internal write-back instruction
configuration: level=2
*-memory
description: Mémoire Système
identifiant matériel: 3a
emplacement: Carte mère
taille: 4GiB
*-bank:0
description: DIMM DDR2 Synchrone 800 MHz (1,2 ns)
produit: PartNum0
fabriquant: Manufacturer0
identifiant matériel: 0
numéro de série: SerNum0
emplacement: DIMM0
taille: 1GiB
bits: 64 bits
horloge: 800MHz (1.2ns)
*-bank:1
description: DIMM DDR2 Synchrone 800 MHz (1,2 ns)
produit: PartNum1
fabriquant: Manufacturer1
identifiant matériel: 1
numéro de série: SerNum1
emplacement: DIMM1
taille: 1GiB
bits: 64 bits
horloge: 800MHz (1.2ns)
*-bank:2
description: DIMM DDR2 Synchrone 800 MHz (1,2 ns)
produit: PartNum2
fabriquant: Manufacturer2
identifiant matériel: 2
numéro de série: SerNum2
emplacement: DIMM2
taille: 1GiB
bits: 64 bits
horloge: 800MHz (1.2ns)
*-bank:3
description: DIMM DDR2 Synchrone 800 MHz (1,2 ns)
produit: PartNum3
fabriquant: Manufacturer3
identifiant matériel: 3
numéro de série: SerNum3
emplacement: DIMM3
taille: 1GiB
bits: 64 bits
horloge: 800MHz (1.2ns)
*-pci
description: Host bridge
produit: 82G33/G31/P35/P31 Express DRAM Controller
fabriquant: Intel Corporation
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 02
bits: 32 bits
horloge: 33MHz
*-pci:0
description: PCI bridge
produit: 82G33/G31/P35/P31 Express PCI Express Root Port
fabriquant: Intel Corporation
identifiant matériel: 1
information bus: pci@0000:00:01.0
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:24 portE/S:c000(taille=4096) mémoire:fa000000-fe8fffff portE/S:c0000000(taille=536870912)
*-display
description: VGA compatible controller
produit: G96 [GeForce 9400 GT]
fabriquant: NVIDIA Corporation
identifiant matériel: 0
information bus: pci@0000:01:00.0
version: a1
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=0
ressources: irq:30 mémoire:fd000000-fdffffff mémoire:c0000000-dfffffff mémoire:fa000000-fbffffff portE/S:cc00(taille=128) mémoire:fe880000-fe8fffff
*-usb:0
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #4
fabriquant: Intel Corporation
identifiant matériel: 1a
information bus: pci@0000:00:1a.0
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:16 portE/S:b800(taille=32)
*-usbhost
produit: UHCI Host Controller
fabriquant: Linux 4.4.0-43-generic uhci_hcd
identifiant matériel: 1
information bus: usb@3
nom logique: usb3
version: 4.04
fonctionnalités: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:0
description: Clavier
produit: Logitech Illuminated Keyboard
fabriquant: Logitech
identifiant matériel: 1
information bus: usb@3:1
version: 55.03
fonctionnalités: usb-2.00
configuration: driver=usbhid maxpower=300mA speed=12Mbit/s
*-usb:1
description: Périphérique d'interface homme/machine
produit: Ellipse ECO
fabriquant: EATON
identifiant matériel: 2
information bus: usb@3:2
version: 1.00
numéro de série: 000000000
fonctionnalités: usb-2.00
configuration: driver=usbfs maxpower=20mA speed=1Mbit/s
*-usb:1
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #5
fabriquant: Intel Corporation
identifiant matériel: 1a.1
information bus: pci@0000:00:1a.1
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:21 portE/S:b880(taille=32)
*-usbhost
produit: UHCI Host Controller
fabriquant: Linux 4.4.0-43-generic uhci_hcd
identifiant matériel: 1
information bus: usb@4
nom logique: usb4
version: 4.04
fonctionnalités: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb
description: Vidéo
produit: Webcam C300
fabriquant: Logitech, Inc.
identifiant matériel: 1
information bus: usb@4:1
version: 0.09
numéro de série: 3231E170
fonctionnalités: usb-2.00
configuration: driver=snd-usb-audio maxpower=500mA speed=12Mbit/s
*-usb:2
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #6
fabriquant: Intel Corporation
identifiant matériel: 1a.2
information bus: pci@0000:00:1a.2
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:18 portE/S:bc00(taille=32)
*-usbhost
produit: UHCI Host Controller
fabriquant: Linux 4.4.0-43-generic uhci_hcd
identifiant matériel: 1
information bus: usb@5
nom logique: usb5
version: 4.04
fonctionnalités: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb
description: Souris
produit: USB-PS/2 Optical Mouse
fabriquant: Logitech
identifiant matériel: 1
information bus: usb@5:1
version: 27.20
fonctionnalités: usb-2.00
configuration: driver=usbhid maxpower=98mA speed=1Mbit/s
*-usb:3
description: USB controller
produit: 82801I (ICH9 Family) USB2 EHCI Controller #2
fabriquant: Intel Corporation
identifiant matériel: 1a.7
information bus: pci@0000:00:1a.7
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
ressources: irq:18 mémoire:f9fffc00-f9ffffff
*-usbhost
produit: EHCI Host Controller
fabriquant: Linux 4.4.0-43-generic ehci_hcd
identifiant matériel: 1
information bus: usb@1
nom logique: usb1
version: 4.04
fonctionnalités: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-multimedia
description: Audio device
produit: 82801I (ICH9 Family) HD Audio Controller
fabriquant: Intel Corporation
identifiant matériel: 1b
information bus: pci@0000:00:1b.0
version: 02
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:28 mémoire:f9ff8000-f9ffbfff
*-pci:1
description: PCI bridge
produit: 82801I (ICH9 Family) PCI Express Port 1
fabriquant: Intel Corporation
identifiant matériel: 1c
information bus: pci@0000:00:1c.0
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:25 portE/S:1000(taille=4096) mémoire:f0000000-f03fffff portE/S:f8f00000(taille=1048576)
*-pci:2
description: PCI bridge
produit: 82801I (ICH9 Family) PCI Express Port 5
fabriquant: Intel Corporation
identifiant matériel: 1c.4
information bus: pci@0000:00:1c.4
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:26 portE/S:d000(taille=4096) mémoire:fea00000-feafffff portE/S:f0400000(taille=2097152)
*-storage
description: SATA controller
produit: JMB363 SATA/IDE Controller
fabriquant: JMicron Technology Corp.
identifiant matériel: 0
information bus: pci@0000:03:00.0
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: storage pm pciexpress ahci_1.0 bus_master cap_list rom
configuration: driver=ahci latency=0
ressources: irq:16 mémoire:feafe000-feafffff mémoire:feae0000-feaeffff
*-ide
description: IDE interface
produit: JMB363 SATA/IDE Controller
fabriquant: JMicron Technology Corp.
identifiant matériel: 0.1
information bus: pci@0000:03:00.1
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: ide pm bus_master cap_list
configuration: driver=pata_jmicron latency=0
ressources: irq:17 portE/S:dc00(taille=8) portE/S:d880(taille=4) portE/S:d800(taille=8) portE/S:d480(taille=4) portE/S:d400(taille=16)
*-pci:3
description: PCI bridge
produit: 82801I (ICH9 Family) PCI Express Port 6
fabriquant: Intel Corporation
identifiant matériel: 1c.5
information bus: pci@0000:00:1c.5
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:27 portE/S:2000(taille=4096) mémoire:fe900000-fe9fffff portE/S:f0600000(taille=2097152)
*-network
description: Ethernet interface
produit: Attansic L1 Gigabit Ethernet
fabriquant: Qualcomm Atheros
identifiant matériel: 0
information bus: pci@0000:02:00.0
nom logique: enp2s0
version: b0
numéro de série: 00:1b:fc:8e:a7:79
taille: 1Gbit/s
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 duplex=full ip=192.168.0.1 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
ressources: irq:29 mémoire:fe9c0000-fe9fffff mémoire:fe9a0000-fe9bffff
*-usb:4
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #1
fabriquant: Intel Corporation
identifiant matériel: 1d
information bus: pci@0000:00:1d.0
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:23 portE/S:b080(taille=32)
*-usbhost
produit: UHCI Host Controller
fabriquant: Linux 4.4.0-43-generic uhci_hcd
identifiant matériel: 1
information bus: usb@6
nom logique: usb6
version: 4.04
fonctionnalités: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:5
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #2
fabriquant: Intel Corporation
identifiant matériel: 1d.1
information bus: pci@0000:00:1d.1
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:19 portE/S:b400(taille=32)
*-usbhost
produit: UHCI Host Controller
fabriquant: Linux 4.4.0-43-generic uhci_hcd
identifiant matériel: 1
information bus: usb@7
nom logique: usb7
version: 4.04
fonctionnalités: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:6
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #3
fabriquant: Intel Corporation
identifiant matériel: 1d.2
information bus: pci@0000:00:1d.2
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:18 portE/S:b480(taille=32)
*-usbhost
produit: UHCI Host Controller
fabriquant: Linux 4.4.0-43-generic uhci_hcd
identifiant matériel: 1
information bus: usb@8
nom logique: usb8
version: 4.04
fonctionnalités: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:7
description: USB controller
produit: 82801I (ICH9 Family) USB2 EHCI Controller #1
fabriquant: Intel Corporation
identifiant matériel: 1d.7
information bus: pci@0000:00:1d.7
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
ressources: irq:23 mémoire:f9fff800-f9fffbff
*-usbhost
produit: EHCI Host Controller
fabriquant: Linux 4.4.0-43-generic ehci_hcd
identifiant matériel: 1
information bus: usb@2
nom logique: usb2
version: 4.04
fonctionnalités: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-pci:4
description: PCI bridge
produit: 82801 PCI Bridge
fabriquant: Intel Corporation
identifiant matériel: 1e
information bus: pci@0000:00:1e.0
version: 92
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci subtractive_decode bus_master cap_list
ressources: portE/S:e000(taille=4096) mémoire:feb00000-febfffff
*-firewire
description: FireWire (IEEE 1394)
produit: VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller
fabriquant: VIA Technologies, Inc.
identifiant matériel: 3
information bus: pci@0000:05:03.0
version: c0
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm ohci bus_master cap_list
configuration: driver=firewire_ohci latency=64 maxlatency=32
ressources: irq:16 mémoire:febff800-febfffff portE/S:ec00(taille=128)
*-isa
description: ISA bridge
produit: 82801IB (ICH9) LPC Interface Controller
fabriquant: Intel Corporation
identifiant matériel: 1f
information bus: pci@0000:00:1f.0
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
ressources: irq:0
*-ide:0
description: IDE interface
produit: 82801IB (ICH9) 2 port SATA Controller [IDE mode]
fabriquant: Intel Corporation
identifiant matériel: 1f.2
information bus: pci@0000:00:1f.2
version: 02
bits: 32 bits
horloge: 66MHz
fonctionnalités: ide pm bus_master cap_list
configuration: driver=ata_piix latency=0
ressources: irq:22 portE/S:a000(taille=8) portE/S:9c00(taille=4) portE/S:9880(taille=8) portE/S:9800(taille=4) portE/S:9480(taille=16) portE/S:9400(taille=16)
*-serial NON-RÉCLAMÉ
description: SMBus
produit: 82801I (ICH9 Family) SMBus Controller
fabriquant: Intel Corporation
identifiant matériel: 1f.3
information bus: pci@0000:00:1f.3
version: 02
bits: 64 bits
horloge: 33MHz
configuration: latency=0
ressources: mémoire:f9fff400-f9fff4ff portE/S:400(taille=32)
*-ide:1
description: IDE interface
produit: 82801I (ICH9 Family) 2 port SATA Controller [IDE mode]
fabriquant: Intel Corporation
identifiant matériel: 1f.5
information bus: pci@0000:00:1f.5
version: 02
bits: 32 bits
horloge: 66MHz
fonctionnalités: ide pm bus_master cap_list
configuration: driver=ata_piix latency=0
ressources: irq:22 portE/S:b000(taille=8) portE/S:ac00(taille=4) portE/S:a880(taille=8) portE/S:a800(taille=4) portE/S:a480(taille=16) portE/S:a400(taille=16)
*-scsi:0
identifiant matériel: 1
nom logique: scsi0
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: Crucial_CT250MX2
identifiant matériel: 0.0.0
information bus: scsi@0:0.0.0
nom logique: /dev/sda
version: MU03
numéro de série: 162412FAEE9A
taille: 232GiB (250GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=4096 signature=0008443a
*-volume:0
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 1
information bus: scsi@0:0.0.0,1
nom logique: /dev/sda1
nom logique: /
version: 1.0
numéro de série: 287ae331-7e01-4499-b127-b6da572da465
taille: 29GiB
capacité: 29GiB
fonctionnalités: primary bootable journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2016-10-08 11:52:15 filesystem=ext4 lastmountpoint=/ modified=2016-10-16 13:21:25 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2016-10-16 13:19:23 state=mounted
*-volume:1
description: Linux swap volume
identifiant matériel: 2
information bus: scsi@0:0.0.0,2
nom logique: /dev/sda2
version: 1
numéro de série: e403f0ff-2e0d-40bb-b885-94ba3973e297
taille: 4000MiB
capacité: 4000MiB
fonctionnalités: primary nofs swap initialized
configuration: filesystem=swap pagesize=4096
*-volume:2
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 3
information bus: scsi@0:0.0.0,3
nom logique: /dev/sda3
nom logique: /home
version: 1.0
numéro de série: 6a541fea-21f8-46d0-a38c-c8947a23554e
taille: 199GiB
capacité: 199GiB
fonctionnalités: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2016-10-07 18:59:11 filesystem=ext4 label=Home lastmountpoint=/home modified=2016-10-16 13:21:27 mount.fstype=ext4 mount.options=rw,relatime,data=ordered mounted=2016-10-16 13:21:27 state=mounted
*-scsi:1
identifiant matériel: 2
nom logique: scsi1
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: SAMSUNG SSD 830
identifiant matériel: 0.0.0
information bus: scsi@1:0.0.0
nom logique: /dev/sdb
version: 3B1Q
numéro de série: S0Z4NEAC911098
taille: 238GiB (256GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=000b1a90
*-volume:0
description: Windows NTFS volume
identifiant matériel: 1
information bus: scsi@1:0.0.0,1
nom logique: /dev/sdb1
version: 3.1
numéro de série: d468e256-6b02-314a-9c72-cedce8ee9444
taille: 48GiB
capacité: 48GiB
fonctionnalités: primary bootable ntfs initialized
configuration: clustersize=4096 created=2012-11-06 19:12:59 filesystem=ntfs label=WINDOWS7 state=clean
*-volume:1
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 2
information bus: scsi@1:0.0.0,2
nom logique: /dev/sdb2
version: 1.0
numéro de série: 74d83b56-0009-414f-8e83-f486554db661
taille: 19GiB
capacité: 19GiB
fonctionnalités: primary journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2012-11-07 18:28:48 filesystem=ext4 label=ROOT lastmountpoint=/ modified=2016-10-15 16:09:10 mounted=2016-10-16 09:11:45 state=clean
*-volume:2
description: Linux swap volume
identifiant matériel: 3
information bus: scsi@1:0.0.0,3
nom logique: /dev/sdb3
version: 1
numéro de série: d4801ad1-8caa-46b2-a1e8-22c62ca7b2cd
taille: 4000MiB
capacité: 4000MiB
fonctionnalités: primary nofs swap initialized
configuration: filesystem=swap pagesize=4096
*-volume:3
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 4
information bus: scsi@1:0.0.0,4
nom logique: /dev/sdb4
version: 1.0
numéro de série: a0fe7d29-52a3-4cc9-b327-2dac042d7b16
taille: 166GiB
capacité: 166GiB
fonctionnalités: primary journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2012-11-07 18:28:49 filesystem=ext4 label=HOME lastmountpoint=/home modified=2016-10-16 09:12:15 mounted=2016-10-16 09:11:46 state=clean
*-scsi:2
identifiant matériel: 3
nom logique: scsi2
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: SanDisk SDSSDA24
identifiant matériel: 0.0.0
information bus: scsi@2:0.0.0
nom logique: /dev/sdc
version: 00RL
numéro de série: 161572402069
taille: 223GiB (240GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=0007a7f6
*-volume
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 1
information bus: scsi@2:0.0.0,1
nom logique: /dev/sdc1
nom logique: /media/SECOND_DISK
version: 1.0
numéro de série: 677ba83b-d45e-4741-ad0d-48f596d47717
taille: 223GiB
capacité: 223GiB
fonctionnalités: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2016-05-21 14:22:43 filesystem=ext4 label=SECOND_DISK lastmountpoint=/media/SECOND_DISK modified=2016-10-16 13:21:27 mount.fstype=ext4 mount.options=rw,relatime,data=ordered mounted=2016-10-16 13:21:27 state=mounted
*-scsi:3
identifiant matériel: 5
nom logique: scsi3
fonctionnalités: emulated
*-cdrom
description: DVD-RAM writer
produit: CDDVDW SH-S203B
fabriquant: TSSTcorp
identifiant matériel: 0.0.0
information bus: scsi@3:0.0.0
nom logique: /dev/cdrom
nom logique: /dev/cdrw
nom logique: /dev/dvd
nom logique: /dev/dvdrw
nom logique: /dev/sr0
version: SB00
fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodiscc'est quoi cet ATA7 !!! ;-(
merci à tous
Hors ligne
#9 Le 16/10/2016, à 14:22
- cqfd93
Re : savoir à quel matériel appartient un ATA dans les messages log ?
Bonjour,
Il ne manquerait pas quelque chose dans ton titre, parce que là, ça ne veut rien dire ?
− cqfd93 −
Hors ligne
#10 Le 16/10/2016, à 14:34
- sebastien29800
Re : savoir à quel matériel appartient un ATA dans les messages log ?
cqfd93 a écrit :
Bonjour,
Il ne manquerait pas quelque chose dans ton titre, parce que là, ça ne veut rien dire ?
bonjour,
désolé, c'est fait,
merci
Hors ligne
#11 Le 16/10/2016, à 14:43
- moko138
Re : savoir à quel matériel appartient un ATA dans les messages log ?
Donne
dmesg%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#12 Le 16/10/2016, à 15:01
- sebastien29800
Re : savoir à quel matériel appartient un ATA dans les messages log ?
merci
je viens de redémarrer et l'erreur n'a pas apparue
j'ai pas l'impression que ATA7 corresponde à un disque !
je te donne le résultat malgré tout de dmesg
sebastien@Pc-Principal-Linux:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-43-generic (buildd@lgw01-22) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #63-Ubuntu SMP Wed Oct 12 13:48:03 UTC 2016 (Ubuntu 4.4.0-43.63-generic 4.4.21)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-43-generic root=UUID=287ae331-7e01-4499-b127-b6da572da465 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff80000-0x00000000bff8dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bff8e000-0x00000000bffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: System manufacturer P5K/P5K, BIOS 1201 10/14/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 3GB, range: 1GB, type UC
[ 0.000000] reg 1, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 2, base: 4GB, range: 1GB, type WB
[ 0.000000] total RAM covered: 4096M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 4GB, range: 1GB, type WB
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbff80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33460000-0x35a27fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FBCD0 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x00000000BFF80000 00003C (v01 A_M_I_ OEMRSDT 10000814 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000BFF80200 000084 (v02 A_M_I_ OEMFACP 10000814 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000BFF80440 0090AA (v01 A0751 A0751077 00000077 INTL 20060113)
[ 0.000000] ACPI: FACS 0x00000000BFF8E000 000040
[ 0.000000] ACPI: APIC 0x00000000BFF80390 00006C (v01 A_M_I_ OEMAPIC 10000814 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000BFF80400 00003C (v01 A_M_I_ OEMMCFG 10000814 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000BFF8E040 000081 (v01 A_M_I_ AMI_OEM 10000814 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BFF894F0 000038 (v01 A_M_I_ OEMHPET 10000814 MSFT 00000097)
[ 0.000000] ACPI: OSFR 0x00000000BFF89530 0000B0 (v01 A_M_I_ OEMOSFR 10000814 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13fff8000-0x13fffcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bff7ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.000000] On node 0 totalpages: 1048350
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12222 pages used for memmap
[ 0.000000] DMA32 zone: 782208 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff80000-0xbff8dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff8e000-0xbffdffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbffe0000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88013fc00000 s98008 r8192 d28968 u524288
[ 0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031947
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-43-generic root=UUID=287ae331-7e01-4499-b127-b6da572da465 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4003772K/4193400K available (8409K kernel code, 1283K rwdata, 3944K rodata, 1480K init, 1292K bss, 189628K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2405.355 MHz processor
[ 0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 4810.71 BogoMIPS (lpj=9621420)
[ 0.004021] pid_max: default: 32768 minimum: 301
[ 0.004033] ACPI: Core revision 20150930
[ 0.013241] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.013273] Security Framework initialized
[ 0.013278] Yama: becoming mindful.
[ 0.013301] AppArmor: AppArmor initialized
[ 0.013661] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015396] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.016385] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.016401] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.016738] Initializing cgroup subsys io
[ 0.016747] Initializing cgroup subsys memory
[ 0.016761] Initializing cgroup subsys devices
[ 0.016768] Initializing cgroup subsys freezer
[ 0.016775] Initializing cgroup subsys net_cls
[ 0.016781] Initializing cgroup subsys perf_event
[ 0.016787] Initializing cgroup subsys net_prio
[ 0.016795] Initializing cgroup subsys hugetlb
[ 0.016801] Initializing cgroup subsys pids
[ 0.016828] CPU: Physical Processor ID: 0
[ 0.016832] CPU: Processor Core ID: 0
[ 0.016837] mce: CPU supports 6 MCE banks
[ 0.016848] CPU0: Thermal monitoring enabled (TM2)
[ 0.016855] process: using mwait in idle threads
[ 0.016863] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.016868] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.017218] Freeing SMP alternatives memory: 32K (ffffffff820b4000 - ffffffff820bc000)
[ 0.020007] ftrace: allocating 32007 entries in 126 pages
[ 0.032103] smpboot: Max logical packages: 1
[ 0.032112] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.032479] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080000] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (family: 0x6, model: 0xf, stepping: 0xb)
[ 0.080000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.080000] core: PEBS disabled due to CPU errata
[ 0.080000] ... version: 2
[ 0.080000] ... bit width: 40
[ 0.080000] ... generic registers: 2
[ 0.080000] ... value mask: 000000ffffffffff
[ 0.080000] ... max period: 000000007fffffff
[ 0.080000] ... fixed-purpose events: 3
[ 0.080000] ... event mask: 0000000700000003
[ 0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080000] x86: Booting SMP configuration:
[ 0.080000] .... node #0, CPUs: #1 #2 #3
[ 0.084021] x86: Booted up 1 node, 4 CPUs
[ 0.084031] smpboot: Total of 4 processors activated (19242.84 BogoMIPS)
[ 0.088168] devtmpfs: initialized
[ 0.092065] evm: security.selinux
[ 0.092070] evm: security.SMACK64
[ 0.092074] evm: security.SMACK64EXEC
[ 0.092077] evm: security.SMACK64TRANSMUTE
[ 0.092081] evm: security.SMACK64MMAP
[ 0.092084] evm: security.ima
[ 0.092088] evm: security.capability
[ 0.092111] PM: Registering ACPI NVS region [mem 0xbff8e000-0xbffdffff] (335872 bytes)
[ 0.092160] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.092217] pinctrl core: initialized pinctrl subsystem
[ 0.092217] RTC time: 15:48:57, date: 10/16/16
[ 0.092333] NET: Registered protocol family 16
[ 0.104008] cpuidle: using governor ladder
[ 0.116006] cpuidle: using governor menu
[ 0.116015] PCCT header not found.
[ 0.116093] ACPI: bus type PCI registered
[ 0.116100] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.116211] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.116224] PCI: not using MMCONFIG
[ 0.116229] PCI: Using configuration type 1 for base access
[ 0.128142] ACPI: Added _OSI(Module Device)
[ 0.128152] ACPI: Added _OSI(Processor Device)
[ 0.128156] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.128160] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.130307] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.135066] ACPI: Dynamic OEM Table Load:
[ 0.135075] ACPI: SSDT 0xFFFF88013A601800 0001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.135510] ACPI: Dynamic OEM Table Load:
[ 0.135517] ACPI: SSDT 0xFFFF88013A601A00 000143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.135943] ACPI: Dynamic OEM Table Load:
[ 0.135951] ACPI: SSDT 0xFFFF88013A601C00 000143 (v01 AMI CPU3PM 00000001 INTL 20060113)
[ 0.136377] ACPI: Dynamic OEM Table Load:
[ 0.136385] ACPI: SSDT 0xFFFF88013A601E00 000143 (v01 AMI CPU4PM 00000001 INTL 20060113)
[ 0.136807] ACPI: Interpreter enabled
[ 0.136820] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.136840] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.136844] ACPI: Using IOAPIC for interrupt routing
[ 0.136879] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.137350] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.137369] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.143752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.143762] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.143772] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.143998] PCI host bridge to bus 0000:00
[ 0.144007] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.144013] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.144018] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.144025] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.144032] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[ 0.144039] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.144052] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.144159] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.144198] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.144241] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.144314] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.144359] pci 0000:00:1a.0: reg 0x20: [io 0xb800-0xb81f]
[ 0.144445] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.144498] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.144542] pci 0000:00:1a.1: reg 0x20: [io 0xb880-0xb89f]
[ 0.144623] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.144676] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.144720] pci 0000:00:1a.2: reg 0x20: [io 0xbc00-0xbc1f]
[ 0.144801] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.144859] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.144887] pci 0000:00:1a.7: reg 0x10: [mem 0xf9fffc00-0xf9ffffff]
[ 0.144956] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.145001] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.145058] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.145082] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
[ 0.145140] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.145230] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.145294] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.145340] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.145395] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.145459] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.145505] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.145559] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.145624] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.145669] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.145723] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.145767] pci 0000:00:1d.0: reg 0x20: [io 0xb080-0xb09f]
[ 0.145850] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.145902] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.145946] pci 0000:00:1d.1: reg 0x20: [io 0xb400-0xb41f]
[ 0.146027] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.146081] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.146126] pci 0000:00:1d.2: reg 0x20: [io 0xb480-0xb49f]
[ 0.146206] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.146265] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.146292] pci 0000:00:1d.7: reg 0x10: [mem 0xf9fff800-0xf9fffbff]
[ 0.146361] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.146406] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.146459] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.146540] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.146598] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[ 0.146679] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
[ 0.146693] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.146702] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.146803] pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018f
[ 0.146822] pci 0000:00:1f.2: reg 0x10: [io 0xa000-0xa007]
[ 0.146830] pci 0000:00:1f.2: reg 0x14: [io 0x9c00-0x9c03]
[ 0.146838] pci 0000:00:1f.2: reg 0x18: [io 0x9880-0x9887]
[ 0.146845] pci 0000:00:1f.2: reg 0x1c: [io 0x9800-0x9803]
[ 0.146853] pci 0000:00:1f.2: reg 0x20: [io 0x9480-0x948f]
[ 0.146861] pci 0000:00:1f.2: reg 0x24: [io 0x9400-0x940f]
[ 0.146958] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.146975] pci 0000:00:1f.3: reg 0x10: [mem 0xf9fff400-0xf9fff4ff 64bit]
[ 0.146994] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.147084] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[ 0.147103] pci 0000:00:1f.5: reg 0x10: [io 0xb000-0xb007]
[ 0.147111] pci 0000:00:1f.5: reg 0x14: [io 0xac00-0xac03]
[ 0.147119] pci 0000:00:1f.5: reg 0x18: [io 0xa880-0xa887]
[ 0.147126] pci 0000:00:1f.5: reg 0x1c: [io 0xa800-0xa803]
[ 0.147134] pci 0000:00:1f.5: reg 0x20: [io 0xa480-0xa48f]
[ 0.147141] pci 0000:00:1f.5: reg 0x24: [io 0xa400-0xa40f]
[ 0.147279] pci 0000:01:00.0: [10de:0641] type 00 class 0x030000
[ 0.147299] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.147310] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.147321] pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.147328] pci 0000:01:00.0: reg 0x24: [io 0xcc00-0xcc7f]
[ 0.147336] pci 0000:01:00.0: reg 0x30: [mem 0xfe880000-0xfe8fffff pref]
[ 0.147422] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.147428] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.147432] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe8fffff]
[ 0.147436] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.147482] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.147494] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.147571] pci 0000:03:00.0: [197b:2363] type 00 class 0x010601
[ 0.147671] pci 0000:03:00.0: reg 0x24: [mem 0xfeafe000-0xfeafffff]
[ 0.147685] pci 0000:03:00.0: reg 0x30: [mem 0xfeae0000-0xfeaeffff pref]
[ 0.147727] pci 0000:03:00.0: PME# supported from D3hot
[ 0.147805] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[ 0.147837] pci 0000:03:00.1: reg 0x10: [io 0xdc00-0xdc07]
[ 0.147851] pci 0000:03:00.1: reg 0x14: [io 0xd880-0xd883]
[ 0.147864] pci 0000:03:00.1: reg 0x18: [io 0xd800-0xd807]
[ 0.147877] pci 0000:03:00.1: reg 0x1c: [io 0xd480-0xd483]
[ 0.147891] pci 0000:03:00.1: reg 0x20: [io 0xd400-0xd40f]
[ 0.148009] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.148025] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.148031] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.148035] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.148099] pci 0000:02:00.0: [1969:1048] type 00 class 0x020000
[ 0.148139] pci 0000:02:00.0: reg 0x10: [mem 0xfe9c0000-0xfe9fffff 64bit]
[ 0.148189] pci 0000:02:00.0: reg 0x30: [mem 0xfe9a0000-0xfe9bffff pref]
[ 0.148230] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.148295] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.148309] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.148317] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.148367] pci 0000:05:03.0: [1106:3044] type 00 class 0x0c0010
[ 0.148390] pci 0000:05:03.0: reg 0x10: [mem 0xfebff800-0xfebfffff]
[ 0.148400] pci 0000:05:03.0: reg 0x14: [io 0xec00-0xec7f]
[ 0.148461] pci 0000:05:03.0: supports D2
[ 0.148463] pci 0000:05:03.0: PME# supported from D2 D3hot D3cold
[ 0.148546] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.148553] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.148557] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.148563] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.148565] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.148568] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.148570] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.148572] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[ 0.149189] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.149255] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.149317] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.149378] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.149438] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.149502] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.149563] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.149623] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.149688] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.149824] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.149824] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.149824] vgaarb: loaded
[ 0.149824] vgaarb: bridge control possible 0000:01:00.0
[ 0.149824] SCSI subsystem initialized
[ 0.149824] libata version 3.00 loaded.
[ 0.149824] ACPI: bus type USB registered
[ 0.149824] usbcore: registered new interface driver usbfs
[ 0.149824] usbcore: registered new interface driver hub
[ 0.149824] usbcore: registered new device driver usb
[ 0.149824] PCI: Using ACPI for IRQ routing
[ 0.155983] PCI: pci_cache_line_size set to 64 bytes
[ 0.156043] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.156045] e820: reserve RAM buffer [mem 0xbff80000-0xbfffffff]
[ 0.156181] NetLabel: Initializing
[ 0.156185] NetLabel: domain hash size = 128
[ 0.156189] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.156207] NetLabel: unlabeled traffic allowed by default
[ 0.156240] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.156240] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.156240] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.158092] amd_nb: Cannot enumerate AMD northbridges
[ 0.158092] clocksource: Switched to clocksource hpet
[ 0.164977] AppArmor: AppArmor Filesystem Enabled
[ 0.165073] pnp: PnP ACPI init
[ 0.165184] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.165193] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.165268] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.165446] system 00:02: [io 0x0290-0x0297] has been reserved
[ 0.165453] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.165614] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.165620] system 00:03: [io 0x0800-0x087f] could not be reserved
[ 0.165626] system 00:03: [io 0x0480-0x04bf] has been reserved
[ 0.165631] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.165637] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.165642] system 00:03: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.165647] system 00:03: [mem 0xffa00000-0xffafffff] has been reserved
[ 0.165653] system 00:03: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.165658] system 00:03: [mem 0xffe00000-0xffefffff] has been reserved
[ 0.165664] system 00:03: [mem 0xfff00000-0xfffffffe] has been reserved
[ 0.165671] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.165908] pnp 00:04: [dma 0 disabled]
[ 0.165979] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.166064] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.166071] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.166078] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166139] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.166209] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.166217] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166398] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.166405] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.166411] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.166416] system 00:08: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.166423] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.166547] pnp: PnP ACPI: found 9 devices
[ 0.174866] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.174894] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.174898] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000 add_align 100000
[ 0.174907] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.174914] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.174918] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.174929] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment
[ 0.174936] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 400000 min_align 100000
[ 0.174938] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x004fffff] res_to_dev_res add_size 400000 min_align 100000
[ 0.174941] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.174944] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.174946] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.174949] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.174952] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.174954] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.174957] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.174959] pci 0000:00:1c.5: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.174965] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
[ 0.174974] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.174984] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.174991] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.174997] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.175003] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.175009] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.175015] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe8fffff]
[ 0.175021] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.175030] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.175036] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.175043] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
[ 0.175050] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.175060] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.175066] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.175073] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.175080] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.175090] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.175096] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.175103] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.175110] pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.175120] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.175126] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.175133] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.175144] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.175146] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.175149] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.175151] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.175153] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xffffffff window]
[ 0.175156] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.175158] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe8fffff]
[ 0.175160] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.175163] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.175165] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff]
[ 0.175167] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.175169] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.175171] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.175174] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.175176] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.175178] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.175181] pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.175183] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.175185] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.175187] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.175190] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.175192] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.175194] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.175197] pci_bus 0000:05: resource 8 [mem 0xc0000000-0xffffffff window]
[ 0.175235] NET: Registered protocol family 2
[ 0.175468] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.175586] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.175753] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.175800] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.175828] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.175896] NET: Registered protocol family 1
[ 0.176904] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.176909] pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue
[ 0.176919] pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue
[ 0.176933] PCI: CLS 32 bytes, default 64
[ 0.176998] Trying to unpack rootfs image as initramfs...
[ 0.869709] Freeing initrd memory: 38688K (ffff880033460000 - ffff880035a28000)
[ 0.869816] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.869822] software IO TLB [mem 0xbbf80000-0xbff80000] (64MB) mapped at [ffff8800bbf80000-ffff8800bff7ffff]
[ 0.870039] Scanning for low memory corruption every 60 seconds
[ 0.870509] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.870555] audit: initializing netlink subsys (disabled)
[ 0.870586] audit: type=2000 audit(1476632937.868:1): initialized
[ 0.870984] Initialise system trusted keyring
[ 0.871179] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.873430] zbud: loaded
[ 0.873726] VFS: Disk quotas dquot_6.6.0
[ 0.873798] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.874186] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.874539] fuse init (API version 7.23)
[ 0.874795] Key type big_key registered
[ 0.874825] Allocating IMA MOK and blacklist keyrings.
[ 0.875455] Key type asymmetric registered
[ 0.875464] Asymmetric key parser 'x509' registered
[ 0.875535] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.875596] io scheduler noop registered
[ 0.875606] io scheduler deadline registered (default)
[ 0.875675] io scheduler cfq registered
[ 0.875978] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.876255] pcieport 0000:00:1c.5: enabling device (0106 -> 0107)
[ 0.876401] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.876413] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.876454] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.876458] vesafb: scrolling: redraw
[ 0.876463] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.876479] vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90000800000, using 5120k, total 5120k
[ 0.880130] Console: switching to colour frame buffer device 160x64
[ 0.883636] fb0: VESA VGA frame buffer device
[ 0.883675] intel_idle: does not run on family 6 model 15
[ 0.883767] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.883807] ACPI: Power Button [PWRB]
[ 0.883876] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.883912] ACPI: Power Button [PWRF]
[ 0.884238] GHES: HEST is not enabled!
[ 0.884408] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.904817] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.906640] Linux agpgart interface v0.103
[ 0.911224] brd: module loaded
[ 0.913202] loop: module loaded
[ 0.913423] ata_piix 0000:00:1f.2: version 2.13
[ 0.913534] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 0.914583] scsi host0: ata_piix
[ 0.914714] scsi host1: ata_piix
[ 0.914782] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[ 0.914818] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[ 0.914930] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.915953] scsi host2: ata_piix
[ 0.916124] scsi host3: ata_piix
[ 0.916208] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
[ 0.916243] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
[ 0.916407] libphy: Fixed MDIO Bus: probed
[ 0.916431] tun: Universal TUN/TAP device driver, 1.6
[ 0.916455] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.916556] PPP generic driver version 2.4.2
[ 0.916693] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.916730] ehci-pci: EHCI PCI platform driver
[ 0.916855] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.916888] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.916932] ehci-pci 0000:00:1a.7: debug port 1
[ 0.920869] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.920881] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[ 0.932031] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.932134] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.932191] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.932225] usb usb1: Product: EHCI Host Controller
[ 0.932249] usb usb1: Manufacturer: Linux 4.4.0-43-generic ehci_hcd
[ 0.932278] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.932465] hub 1-0:1.0: USB hub found
[ 0.932492] hub 1-0:1.0: 6 ports detected
[ 0.934116] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.935482] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.936885] ehci-pci 0000:00:1d.7: debug port 1
[ 0.942141] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.942152] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9fff800
[ 0.952044] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.953469] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.954824] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.956191] usb usb2: Product: EHCI Host Controller
[ 0.957544] usb usb2: Manufacturer: Linux 4.4.0-43-generic ehci_hcd
[ 0.958906] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.960414] hub 2-0:1.0: USB hub found
[ 0.961753] hub 2-0:1.0: 6 ports detected
[ 0.963255] ehci-platform: EHCI generic platform driver
[ 0.964624] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.965977] ohci-pci: OHCI PCI platform driver
[ 0.967331] ohci-platform: OHCI generic platform driver
[ 0.968733] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.970174] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.971537] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.972925] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.974305] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 0.975706] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.977089] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.978442] usb usb3: Product: UHCI Host Controller
[ 0.979781] usb usb3: Manufacturer: Linux 4.4.0-43-generic uhci_hcd
[ 0.981142] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.982619] hub 3-0:1.0: USB hub found
[ 0.983937] hub 3-0:1.0: 2 ports detected
[ 0.985421] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.986714] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.988042] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.989357] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.990683] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.991960] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.993262] usb usb4: Product: UHCI Host Controller
[ 0.994548] usb usb4: Manufacturer: Linux 4.4.0-43-generic uhci_hcd
[ 0.995839] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.997289] hub 4-0:1.0: USB hub found
[ 0.998589] hub 4-0:1.0: 2 ports detected
[ 1.000047] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.001343] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.002640] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 1.003937] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 1.005293] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.006588] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.007893] usb usb5: Product: UHCI Host Controller
[ 1.009207] usb usb5: Manufacturer: Linux 4.4.0-43-generic uhci_hcd
[ 1.010508] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.011953] hub 5-0:1.0: USB hub found
[ 1.013266] hub 5-0:1.0: 2 ports detected
[ 1.014701] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.015977] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.017290] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.018581] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 1.019898] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.021205] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.022500] usb usb6: Product: UHCI Host Controller
[ 1.023785] usb usb6: Manufacturer: Linux 4.4.0-43-generic uhci_hcd
[ 1.025099] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.026529] hub 6-0:1.0: USB hub found
[ 1.027812] hub 6-0:1.0: 2 ports detected
[ 1.029272] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.030553] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.031853] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.033190] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 1.034530] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.035821] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.037136] usb usb7: Product: UHCI Host Controller
[ 1.038429] usb usb7: Manufacturer: Linux 4.4.0-43-generic uhci_hcd
[ 1.039727] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.041188] hub 7-0:1.0: USB hub found
[ 1.042476] hub 7-0:1.0: 2 ports detected
[ 1.043909] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.045209] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.046501] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.047807] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 1.049157] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.050449] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.051736] usb usb8: Product: UHCI Host Controller
[ 1.053042] usb usb8: Manufacturer: Linux 4.4.0-43-generic uhci_hcd
[ 1.054327] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.055751] hub 8-0:1.0: USB hub found
[ 1.057047] hub 8-0:1.0: 2 ports detected
[ 1.058476] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.059760] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.061696] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.063176] mousedev: PS/2 mouse device common for all mice
[ 1.064748] rtc_cmos 00:01: RTC can wake from S4
[ 1.066207] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.067552] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.068908] i2c /dev entries driver
[ 1.070307] device-mapper: uevent: version 1.0.3
[ 1.071756] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.073169] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.074988] NET: Registered protocol family 10
[ 1.076677] NET: Registered protocol family 17
[ 1.078041] Key type dns_resolver registered
[ 1.079650] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb6
[ 1.081027] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb6
[ 1.082368] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb6
[ 1.083732] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb6
[ 1.085110] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.086748] registered taskstats version 1
[ 1.088401] Loading compiled-in X.509 certificates
[ 1.090867] Loaded X.509 cert 'Build time autogenerated kernel key: d76179dc6bbadd817ec29258d181eadabda602cb'
[ 1.092278] zswap: loaded using pool lzo/zbud
[ 1.096022] Key type trusted registered
[ 1.101664] Key type encrypted registered
[ 1.103029] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.104420] ima: No TPM chip found, activating TPM-bypass!
[ 1.105804] evm: HMAC attrs: 0x1
[ 1.107507] Magic number: 4:605:841
[ 1.109053] rtc_cmos 00:01: setting system clock to 2016-10-16 15:48:58 UTC (1476632938)
[ 1.111014] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.112442] EDD information not available.
[ 1.113900] PM: Hibernation image not present or could not be loaded.
[ 1.392062] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.392104] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.395085] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.396053] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.400196] ata1.00: supports DRM functions and may not be fully accessible
[ 1.400959] ata3.00: ATA-9: SanDisk SDSSDA240G, Z22000RL, max UDMA/133
[ 1.400961] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.404453] ata1.00: ATA-10: Crucial_CT250MX200SSD1, MU03, max UDMA/133
[ 1.405848] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.407381] ata2.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[ 1.408920] ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.410485] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB00, max UDMA/100
[ 1.416294] ata1.00: supports DRM functions and may not be fully accessible
[ 1.417799] ata2.00: configured for UDMA/133
[ 1.419266] ata1.00: configured for UDMA/133
[ 1.420959] scsi 0:0:0:0: Direct-Access ATA Crucial_CT250MX2 MU03 PQ: 0 ANSI: 5
[ 1.422614] ata1.00: Enabling discard_zeroes_data
[ 1.422667] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.425469] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 1.425704] ata3.00: configured for UDMA/133
[ 1.425860] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5
[ 1.426055] sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.426115] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.426146] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.426148] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.426184] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.426264] scsi 2:0:0:0: Direct-Access ATA SanDisk SDSSDA24 00RL PQ: 0 ANSI: 5
[ 1.426436] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 1.426526] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.426534] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.426537] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.426562] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.426932] sdb: sdb1 sdb2 sdb3 sdb4
[ 1.427296] sdc: sdc1
[ 1.427301] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.427609] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.428016] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 1.428200] ata4.00: configured for UDMA/100
[ 1.431959] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB00 PQ: 0 ANSI: 5
[ 1.451801] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.451803] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.451936] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.452017] sr 3:0:0:0: Attached scsi generic sg3 type 5
[ 1.459071] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.460646] sd 0:0:0:0: [sda] Write Protect is off
[ 1.462143] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.462162] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.463758] ata1.00: Enabling discard_zeroes_data
[ 1.465785] sda: sda1 sda2 sda3
[ 1.467615] ata1.00: Enabling discard_zeroes_data
[ 1.469229] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.472376] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[ 1.473921] Write protecting the kernel read-only data: 14336k
[ 1.476355] Freeing unused kernel memory: 1820K (ffff880001839000 - ffff880001a00000)
[ 1.478407] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[ 1.497574] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.498319] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.498376] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.498725] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.498799] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.498874] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.498946] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.499020] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.499103] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.499183] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.540565] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.552695] scsi host4: pata_jmicron
[ 1.554364] scsi host5: pata_jmicron
[ 1.555919] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 1.557412] ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 1.559071] ahci 0000:03:00.0: version 3.0
[ 1.561146] atl1 0000:02:00.0: version 2.1.3
[ 1.572024] usb 1-3: new high-speed USB device number 4 using ehci-pci
[ 1.572069] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.572071] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.572522] scsi host6: ahci
[ 1.572665] scsi host7: ahci
[ 1.572731] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[ 1.572734] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[ 1.614088] usb 3-1: New USB device found, idVendor=046d, idProduct=c318
[ 1.615638] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.617474] usb 3-1: Product: Logitech Illuminated Keyboard
[ 1.619097] usb 3-1: Manufacturer: Logitech
[ 1.632051] firewire_ohci 0000:05:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.640278] atl1 0000:02:00.0 enp2s0: renamed from eth0
[ 1.643737] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.652498] usbcore: registered new interface driver usbhid
[ 1.654022] usbhid: USB HID core driver
[ 1.658161] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/0003:046D:C318.0001/input/input3
[ 1.712177] hid-generic 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.0-1/input0
[ 1.716244] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/0003:046D:C318.0002/input/input4
[ 1.772209] hid-generic 0003:046D:C318.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.0-1/input1
[ 1.868029] tsc: Refined TSC clocksource calibration: 2405.454 MHz
[ 1.869891] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22ac578b638, max_idle_ns: 440795236672 ns
[ 1.876030] usb 3-2: new low-speed USB device number 3 using uhci_hcd
[ 1.884709] usb 1-3: New USB device found, idVendor=046d, idProduct=0805
[ 1.886381] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[ 1.888035] usb 1-3: SerialNumber: 3231E170
[ 1.896106] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.900047] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.132188] firewire_core 0000:05:03.0: created device fw0: GUID 0011d800015f6eab, S400
[ 2.336031] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 2.720062] usb 5-1: New USB device found, idVendor=046d, idProduct=c050
[ 2.721736] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.723382] usb 5-1: Product: USB-PS/2 Optical Mouse
[ 2.725012] usb 5-1: Manufacturer: Logitech
[ 2.743550] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/0003:046D:C050.0003/input/input5
[ 2.745417] hid-generic 0003:046D:C050.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.2-1/input0
[ 2.868095] clocksource: Switched to clocksource tsc
[ 3.931071] usb 3-2: New USB device found, idVendor=0463, idProduct=ffff
[ 3.932852] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 3.934574] usb 3-2: Product: Ellipse ECO
[ 3.936264] usb 3-2: Manufacturer: EATON
[ 3.937931] usb 3-2: SerialNumber: 000000000
[ 4.564046] floppy0: no floppy controllers found
[ 7.263798] hid-generic 0003:0463:FFFF.0004: hiddev0,hidraw3: USB HID v10.10 Device [EATON Ellipse ECO] on usb-0000:00:1a.0-2/input0
[ 8.476019] raid6: sse2x1 gen() 3988 MB/s
[ 8.544016] raid6: sse2x1 xor() 4094 MB/s
[ 8.612012] raid6: sse2x2 gen() 6381 MB/s
[ 8.680013] raid6: sse2x2 xor() 4955 MB/s
[ 8.748019] raid6: sse2x4 gen() 7203 MB/s
[ 8.816016] raid6: sse2x4 xor() 5513 MB/s
[ 8.817749] raid6: using algorithm sse2x4 gen() 7203 MB/s
[ 8.819495] raid6: .... xor() 5513 MB/s, rmw enabled
[ 8.821266] raid6: using ssse3x2 recovery algorithm
[ 8.824508] xor: measuring software checksum speed
[ 8.864013] prefetch64-sse: 9637.000 MB/sec
[ 8.904012] generic_sse: 8526.000 MB/sec
[ 8.905750] xor: using function: prefetch64-sse (9637.000 MB/sec)
[ 8.925666] Btrfs loaded
[ 9.092025] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.227817] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 9.231635] systemd[1]: Detected architecture x86-64.
[ 9.239455] systemd[1]: Set hostname to <Pc-Principal-Linux>.
[ 9.385044] systemd[1]: Listening on Journal Audit Socket.
[ 9.388743] systemd[1]: Created slice User and Session Slice.
[ 9.392207] systemd[1]: Listening on LVM2 poll daemon socket.
[ 9.395560] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 9.398914] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 9.402260] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 9.405634] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 9.409040] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 9.412554] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 9.416076] systemd[1]: Listening on Journal Socket.
[ 9.419617] systemd[1]: Created slice System Slice.
[ 9.436171] systemd[1]: Started Read required files in advance.
[ 9.440830] systemd[1]: Starting Set console keymap...
[ 9.445330] systemd[1]: Mounting Huge Pages File System...
[ 9.450125] systemd[1]: Mounting Debug File System...
[ 9.455797] systemd[1]: Starting Load Kernel Modules...
[ 9.462280] systemd[1]: Started Braille Device Support.
[ 9.466516] systemd[1]: Mounting RPC Pipe File System...
[ 9.471207] systemd[1]: Listening on udev Control Socket.
[ 9.474746] systemd[1]: Listening on Journal Socket (/dev/log).
[ 9.478461] systemd[1]: Reached target Slices.
[ 9.482015] systemd[1]: Listening on udev Kernel Socket.
[ 9.483936] lp: driver loaded but no devices found
[ 9.487527] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 9.491143] ppdev: user-space parallel port driver
[ 9.494328] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 9.499278] RPC: Registered named UNIX socket transport module.
[ 9.499279] RPC: Registered udp transport module.
[ 9.499280] RPC: Registered tcp transport module.
[ 9.499280] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.507320] systemd[1]: Listening on Syslog Socket.
[ 9.511640] systemd[1]: Starting Journal Service...
[ 9.516302] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 9.520168] systemd[1]: Reached target Encrypted Volumes.
[ 9.524463] systemd[1]: Starting Uncomplicated firewall...
[ 9.528371] systemd[1]: Reached target User and Group Name Lookups.
[ 9.532669] systemd[1]: Mounting POSIX Message Queue File System...
[ 9.538597] systemd[1]: Mounted RPC Pipe File System.
[ 9.542323] systemd[1]: Mounted POSIX Message Queue File System.
[ 9.546112] systemd[1]: Mounted Huge Pages File System.
[ 9.550066] systemd[1]: Mounted Debug File System.
[ 9.553772] systemd[1]: Started Set console keymap.
[ 9.557673] systemd[1]: Started Load Kernel Modules.
[ 9.561891] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 9.565815] systemd[1]: Started Uncomplicated firewall.
[ 9.632375] systemd[1]: Started LVM2 metadata daemon.
[ 9.637029] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 9.641437] systemd[1]: Starting Apply Kernel Variables...
[ 9.645918] systemd[1]: Mounting FUSE Control File System...
[ 9.651793] systemd[1]: Mounted FUSE Control File System.
[ 9.655681] systemd[1]: Started Journal Service.
[ 10.050850] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 10.075005] systemd-journald[370]: Received request to flush runtime journal from PID 1
[ 10.239349] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.328977] [drm] Initialized drm 1.1.0 20060810
[ 10.456749] media: Linux media interface: v0.10
[ 10.475327] Linux video capture interface: v2.00
[ 10.504234] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC883: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 10.504240] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.504243] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 10.504245] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 10.504248] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 10.504250] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 10.504253] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 10.504256] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 10.504258] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 10.561322] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 10.576082] coretemp coretemp.0: Using relative temperature scale!
[ 10.576122] coretemp coretemp.0: Using relative temperature scale!
[ 10.576135] coretemp coretemp.0: Using relative temperature scale!
[ 10.576148] coretemp coretemp.0: Using relative temperature scale!
[ 10.599282] nvidia: module license 'NVIDIA' taints kernel.
[ 10.599287] Disabling lock debugging due to kernel taint
[ 10.602968] gpio_ich: GPIO from 451 to 511 on gpio_ich
[ 10.622369] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 10.631410] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 10.631930] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 10.631938] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.96 Sun Nov 8 22:33:28 PST 2015
[ 10.644420] Adding 4096568k swap on /dev/sda2. Priority:-1 extents:1 across:4096568k SSFS
[ 10.680667] nvidia_uvm: Loaded the UVM driver, major device number 245
[ 10.688341] usb 1-3: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
[ 10.688348] usb 1-3: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1
[ 10.688686] usbcore: registered new interface driver snd-usb-audio
[ 10.688712] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0805)
[ 10.704522] input: UVC Camera (046d:0805) as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input6
[ 10.704660] usbcore: registered new interface driver uvcvideo
[ 10.704661] USB Video Class driver (1.1.1)
[ 10.878234] random: nonblocking pool is initialized
[ 10.907863] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 11.540548] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 11.540695] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 11.540796] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.540901] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 11.540977] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 11.541077] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 11.541152] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 11.541231] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 11.656517] NVRM: Your system is not currently configured to drive a VGA console
[ 11.656522] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 11.656524] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 11.656526] NVRM: drivers including, but not limited to, vesafb, may result in
[ 11.656527] NVRM: corruption and stability problems, and is not supported.
[ 12.276899] cgroup: new mount options do not match the existing superblock, will be ignored
[ 12.555234] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 12.555654] atl1 0000:02:00.0: enp2s0 link is up 100 Mbps full duplex
[ 12.555703] atl1 0000:02:00.0: enp2s0 link is up 1000 Mbps full duplex
[ 13.252067] floppy0: no floppy controllers found
[ 18.165700] FS-Cache: Loaded
[ 18.192744] FS-Cache: Netfs 'nfs' registered for caching
[ 18.437132] vboxdrv: Found 4 processor cores
[ 18.437364] vboxdrv: fAsync=0 offMin=0x41d offMax=0x1746
[ 18.537524] vboxdrv: TSC mode is Synchronous, tentative frequency 2405490827 Hz
[ 18.537527] vboxdrv: Successfully loaded version 5.0.24_Ubuntu (interface 0x00240000)
[ 18.543254] VBoxNetFlt: Successfully started.
[ 18.548461] VBoxNetAdp: Successfully started.
[ 18.554000] VBoxPciLinuxInit
[ 18.557939] vboxpci: IOMMU not found (not registered)
[ 20.696024] usb 1-3: reset high-speed USB device number 4 using ehci-pci
[ 475.524420] perf interrupt took too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50000ls -l /sys/block/sd* | sed 's/.*\(sd.*\) -.*\(ata.*\)\/h.*/\2 => \1/'
ata1 => sda
ata2 => sdb
ata3 => sdcHors ligne
#13 Le 16/10/2016, à 15:03
- sebastien29800
Re : savoir à quel matériel appartient un ATA dans les messages log ?
j'ai commandé des câbles SATA neufs pour voir mais bon ........ (j'ai des vieux câbles rouges qui n'ont pas de pince au bout)
Hors ligne
#14 Le 16/10/2016, à 15:18
- cqfd93
Re : savoir à quel matériel appartient un ATA dans les messages log ?
sebastien29800 a écrit :
désolé, c'est fait,
Nettement plus parlant, merci !
− cqfd93 −
Hors ligne
#15 Le 16/10/2016, à 15:36
- moko138
Re : savoir à quel matériel appartient un ATA dans les messages log ?
La "pince au bout" ne change rien, à moins de confondre sa tour et son shaker.
- -
1) Poussière :
Pour chaque nappe on a 4 connecteurs à nettoyer.
Tu vas pas me dire que tu as peur de l'aspirateur ???
- -
2) Présomptions aussi sur une mauvaise prise en charge par ton noyau actuel de ce contrôleur Sata :
JMB363 SATA/IDE Controller
*-pci:2
description: PCI bridge
produit: 82801I (ICH9 Family) PCI Express Port 5
fabriquant: Intel Corporation
identifiant matériel: 1c.4
information bus: pci@0000:00:1c.4
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:26 portE/S:d000(taille=4096) mémoire:fea00000-feafffff portE/S:f0400000(taille=2097152)
*-storage
description: SATA controller
produit: JMB363 SATA/IDE Controller
fabriquant: JMicron Technology Corp.
identifiant matériel: 0
information bus: pci@0000:03:00.0
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: storage pm pciexpress ahci_1.0 bus_master cap_list rom
configuration: driver=ahci latency=0
ressources: irq:16 mémoire:feafe000-feafffff mémoire:feae0000-feaeffff
*-ide
description: IDE interface
produit: JMB363 SATA/IDE Controller
fabriquant: JMicron Technology Corp.
identifiant matériel: 0.1
information bus: pci@0000:03:00.1
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: ide pm bus_master cap_list
configuration: driver=pata_jmicron latency=0
ressources: irq:17 portE/S:dc00(taille=8) portE/S:d880(taille=4) portE/S:d800(taille=8) portE/S:d480(taille=4) portE/S:d400(taille=16)
Donne
lspci -nnpendant que j'épluche ton dmesg.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#16 Le 16/10/2016, à 15:38
- sebastien29800
Re : savoir à quel matériel appartient un ATA dans les messages log ?
cela fait 45 minutes que j'ai redémarré et aucune erreur concernant ATA7, bizarre, je n'ai pourtant rien fait !
alors qu'avant, il remontait cette erreur quasiment toutes les secondes
Hors ligne
#17 Le 18/10/2016, à 17:11
- sebastien29800
Re : savoir à quel matériel appartient un ATA dans les messages log ?
rebonjour, désolé pour cette absence
câbles neufs, rien ne change :
exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
Oct 18 18:05:17 Pc-Principal-Linux kernel: [ 3449.568095] ata7: irq_stat 0x00000040, connection status changed
Oct 18 18:05:17 Pc-Principal-Linux kernel: [ 3449.568099] ata7: SError: { DevExch }
Oct 18 18:05:17 Pc-Principal-Linux kernel: [ 3449.568107] ata7: limiting SATA link speed to 1.5 Gbps
Oct 18 18:05:17 Pc-Principal-Linux kernel: [ 3449.568111] ata7: hard resetting link
Oct 18 18:05:18 Pc-Principal-Linux kernel: [ 3450.300070] ata7: SATA link down (SStatus 0 SControl 310)
Oct 18 18:05:18 Pc-Principal-Linux kernel: [ 3450.300090] ata7: EH completesebastien@Pc-Principal-Linux:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02)
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02)
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02)
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02)
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02)
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02)
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02)
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02)
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02)
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02)
00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] [8086:2921] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] [8086:2926] (rev 02)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G96 [GeForce 9400 GT] [10de:0641] (rev a1)
02:00.0 Ethernet controller [0200]: Qualcomm Atheros Attansic L1 Gigabit Ethernet [1969:1048] (rev b0)
03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 03)
03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 03)
05:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0)
sebastien@Pc-Principal-Linux:~$ encore désolé pour les 48heures sans nouvelles
Hors ligne