#1 Le 01/11/2016, à 13:33
- M4gie
Carte MicroSD non détectée
Bonjour,
Je possède une carte MicroSD SanDisk Ultra 32Gb que j'utilise avec mon portable Android mais depuis quelques temps mon portable ne détecte plus ma carte SD et me demande de la formater, j'ai donc été sur quelques forums, j'ai voulu la formater à l'aide de TestDisk mais j'ai fais pire que mieux car maintenant mon ordinateur ne détecte même plus ma micro carte lorsque je la connecte à l'aide d'un adaptateur sur mon ordinateur sous Ubuntu 16.04.
Si cela peut vous aider voici ce que j’obtiens avec la commande dmseg: (Je pense que le plus intéressant ce trouve à la fin)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-45-generic (buildd@lgw01-34) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 (Ubuntu 4.4.0-45.66-generic 4.4.21)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-45-generic root=UUID=05c063a7-6f6c-4e61-90f4-01322ab1ba0c ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] tseg: 00cff00000
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ce453fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ce454000-0x00000000ce653fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ce654000-0x00000000cfd3efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfd3f000-0x00000000cfdbefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cfdbf000-0x00000000cfebefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfebf000-0x00000000cfef5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfef6000-0x00000000cfefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f7000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion g7 Notebook PC/1665, BIOS F.02 02/16/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000FFE00000 mask FFFFFFE00000 write-protect
[ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xcff00 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[ 0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[ 0.000000] BRK [0x02206000, 0x02206fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33836000-0x35c12fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HP )
[ 0.000000] ACPI: XSDT 0x00000000CFEF5120 00005C (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP 0x00000000CFEF4000 0000F4 (v04 HP 1665 00000003 MSFT 01000013)
[ 0.000000] ACPI: DSDT 0x00000000CFEE2000 00E270 (v01 HP 1665 F0000000 MSFT 01000013)
[ 0.000000] ACPI: FACS 0x00000000CFE9C000 000040
[ 0.000000] ACPI: FACS 0x00000000CFE9C000 000040
[ 0.000000] ACPI: HPET 0x00000000CFEF3000 000038 (v01 HP 1665 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 0x00000000CFEF2000 000084 (v02 HP 1665 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 0x00000000CFEF1000 00003C (v01 HP 1665 00000001 MSFT 01000013)
[ 0.000000] ACPI: BOOT 0x00000000CFEE1000 000028 (v01 HP 1665 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 0x00000000CFEE0000 000176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x00000000CFEDF000 000386 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11fff8000-0x11fffcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ce453fff]
[ 0.000000] node 0: [mem 0x00000000ce654000-0x00000000cfd3efff]
[ 0.000000] node 0: [mem 0x00000000cfef6000-0x00000000cfefffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
[ 0.000000] On node 0 totalpages: 981735
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13230 pages used for memmap
[ 0.000000] DMA32 zone: 846665 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce454000-0xce653fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfd3f000-0xcfdbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfdbf000-0xcfebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfebf000-0xcfef5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xf6ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf7000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xcff00000-0xf6ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88011fc00000 s98008 r8192 d28968 u524288
[ 0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 966372
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-45-generic root=UUID=05c063a7-6f6c-4e61-90f4-01322ab1ba0c ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xc4000000-0xc5ffffff] (32MB)
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[ 0.000000] Memory: 3677832K/3926940K available (8409K kernel code, 1283K rwdata, 3944K rodata, 1480K init, 1292K bss, 249108K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:456 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2294.213 MHz processor
[ 0.000043] Calibrating delay loop (skipped), value calculated using timer frequency.. 4588.42 BogoMIPS (lpj=9176852)
[ 0.000047] pid_max: default: 32768 minimum: 301
[ 0.000056] ACPI: Core revision 20150930
[ 0.010529] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.010557] Security Framework initialized
[ 0.010559] Yama: becoming mindful.
[ 0.010581] AppArmor: AppArmor initialized
[ 0.010912] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012819] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.013722] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.013730] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.014045] Initializing cgroup subsys io
[ 0.014051] Initializing cgroup subsys memory
[ 0.014062] Initializing cgroup subsys devices
[ 0.014066] Initializing cgroup subsys freezer
[ 0.014069] Initializing cgroup subsys net_cls
[ 0.014073] Initializing cgroup subsys perf_event
[ 0.014077] Initializing cgroup subsys net_prio
[ 0.014082] Initializing cgroup subsys hugetlb
[ 0.014085] Initializing cgroup subsys pids
[ 0.014111] CPU: Physical Processor ID: 0
[ 0.014112] CPU: Processor Core ID: 0
[ 0.014114] mce: CPU supports 6 MCE banks
[ 0.014121] LVT offset 0 assigned for vector 0xf9
[ 0.014126] process: using AMD E400 aware idle routine
[ 0.014129] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.014131] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.014427] Freeing SMP alternatives memory: 32K (ffffffff820b4000 - ffffffff820bc000)
[ 0.021175] ftrace: allocating 32007 entries in 126 pages
[ 0.037782] smpboot: Max logical packages: 2
[ 0.037786] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.038148] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.184026] smpboot: CPU0: AMD Athlon(tm) II P360 Dual-Core Processor (family: 0x10, model: 0x6, stepping: 0x3)
[ 0.184049] Performance Events: AMD PMU driver.
[ 0.184055] ... version: 0
[ 0.184056] ... bit width: 48
[ 0.184057] ... generic registers: 4
[ 0.184059] ... value mask: 0000ffffffffffff
[ 0.184060] ... max period: 00007fffffffffff
[ 0.184061] ... fixed-purpose events: 0
[ 0.184062] ... event mask: 000000000000000f
[ 0.184922] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.185021] x86: Booting SMP configuration:
[ 0.185024] .... node #0, CPUs: #1
[ 0.187149] x86: Booted up 1 node, 2 CPUs
[ 0.187152] smpboot: Total of 2 processors activated (9176.85 BogoMIPS)
[ 0.187515] process: System has AMD C1E enabled
[ 0.187530] process: Switch to broadcast mode on CPU1
[ 0.187590] process: Switch to broadcast mode on CPU0
[ 0.187690] devtmpfs: initialized
[ 0.192028] evm: security.selinux
[ 0.192029] evm: security.SMACK64
[ 0.192031] evm: security.SMACK64EXEC
[ 0.192032] evm: security.SMACK64TRANSMUTE
[ 0.192033] evm: security.SMACK64MMAP
[ 0.192034] evm: security.ima
[ 0.192035] evm: security.capability
[ 0.192141] PM: Registering ACPI NVS region [mem 0xce454000-0xce653fff] (2097152 bytes)
[ 0.192175] PM: Registering ACPI NVS region [mem 0xcfdbf000-0xcfebefff] (1048576 bytes)
[ 0.192277] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.192386] pinctrl core: initialized pinctrl subsystem
[ 0.192533] RTC time: 11:15:18, date: 10/31/16
[ 0.192694] NET: Registered protocol family 16
[ 0.203593] cpuidle: using governor ladder
[ 0.215594] cpuidle: using governor menu
[ 0.215607] PCCT header not found.
[ 0.215615] node 0 link 0: io port [0, ffffff]
[ 0.215618] TOM: 00000000d0000000 aka 3328M
[ 0.215621] Fam 10h mmconf [mem 0xf7000000-0xf7ffffff]
[ 0.215623] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.215626] node 0 link 0: mmio [e0000000, f12fffff]
[ 0.215628] node 0 link 0: mmio [f1300000, f14fffff]
[ 0.215630] node 0 link 0: mmio [f1500000, f6ffffff]
[ 0.215631] node 0 link 0: mmio [f7000000, f7ffffff] ==> none
[ 0.215633] node 0 link 0: mmio [f8000000, febfffff]
[ 0.215635] node 0 link 0: mmio [fec00000, fffeffff]
[ 0.215637] node 0 link 0: mmio [ffff0000, ffffffff]
[ 0.215638] TOM2: 0000000130000000 aka 4864M
[ 0.215640] bus: [bus 00-1f] on node 0 link 0
[ 0.215642] bus: 00 [io 0x0000-0xffff]
[ 0.215643] bus: 00 [mem 0xd0000000-0xf6ffffff]
[ 0.215644] bus: 00 [mem 0xf8000000-0xffffffff]
[ 0.215646] bus: 00 [mem 0x130000000-0xfcffffffff]
[ 0.215726] Simple Boot Flag at 0x44 set to 0x1
[ 0.215772] ACPI: bus type PCI registered
[ 0.215775] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.215887] PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xf7000000-0xf7ffffff] (base 0xf7000000)
[ 0.215890] PCI: MMCONFIG at [mem 0xf7000000-0xf7ffffff] reserved in E820
[ 0.215895] PCI: Using configuration type 1 for base access
[ 0.216105] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.216106] mtrr: probably your BIOS does not setup all CPUs.
[ 0.216107] mtrr: corrected configuration.
[ 0.228216] ACPI: Added _OSI(Module Device)
[ 0.228220] ACPI: Added _OSI(Processor Device)
[ 0.228222] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.228224] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.230841] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.233010] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.233356] ACPI : EC: EC started
[ 0.235714] ACPI: Interpreter enabled
[ 0.235735] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.235743] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.235765] ACPI: (supports S0 S3 S4 S5)
[ 0.235767] ACPI: Using IOAPIC for interrupt routing
[ 0.235938] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.649205] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.649215] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.649221] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.649234] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0f] only partially covers this bridge
[ 0.649589] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cefff])
[ 0.649747] PCI host bridge to bus 0000:00
[ 0.649751] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.649753] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.649756] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.649758] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.649760] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.649762] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.649764] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.649766] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.649768] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.649771] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.649773] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.649775] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.649777] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.649779] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.649781] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf6ffffff window]
[ 0.649784] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfed3ffff window]
[ 0.649786] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
[ 0.649788] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.649800] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[ 0.649905] pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
[ 0.650000] pci 0000:00:03.0: [1022:960b] type 01 class 0x060400
[ 0.650039] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.650331] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.650373] pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
[ 0.650411] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.650448] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.650489] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
[ 0.650527] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.650571] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.650621] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
[ 0.650665] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.650751] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.650777] pci 0000:00:11.0: reg 0x10: [io 0x8038-0x803f]
[ 0.650786] pci 0000:00:11.0: reg 0x14: [io 0x804c-0x804f]
[ 0.650796] pci 0000:00:11.0: reg 0x18: [io 0x8030-0x8037]
[ 0.650805] pci 0000:00:11.0: reg 0x1c: [io 0x8048-0x804b]
[ 0.650814] pci 0000:00:11.0: reg 0x20: [io 0x8010-0x801f]
[ 0.650824] pci 0000:00:11.0: reg 0x24: [mem 0xf1508000-0xf15083ff]
[ 0.650919] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.650934] pci 0000:00:12.0: reg 0x10: [mem 0xf1507000-0xf1507fff]
[ 0.651019] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.651068] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.652268] pci 0000:00:12.2: reg 0x10: [mem 0xf1508600-0xf15086ff]
[ 0.659289] pci 0000:00:12.2: supports D1 D2
[ 0.659291] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.659330] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.659378] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.659394] pci 0000:00:13.0: reg 0x10: [mem 0xf1506000-0xf1506fff]
[ 0.659480] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.659528] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.660709] pci 0000:00:13.2: reg 0x10: [mem 0xf1508500-0xf15085ff]
[ 0.667712] pci 0000:00:13.2: supports D1 D2
[ 0.667714] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.667752] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.667798] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.667930] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.667957] pci 0000:00:14.2: reg 0x10: [mem 0xf1500000-0xf1503fff 64bit]
[ 0.668015] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.668094] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.668229] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.668298] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.668338] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.668354] pci 0000:00:14.5: reg 0x10: [mem 0xf1505000-0xf1505fff]
[ 0.668475] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.668490] pci 0000:00:16.0: reg 0x10: [mem 0xf1504000-0xf1504fff]
[ 0.668615] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.669802] pci 0000:00:16.2: reg 0x10: [mem 0xf1508400-0xf15084ff]
[ 0.676806] pci 0000:00:16.2: supports D1 D2
[ 0.676808] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.676848] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.676893] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.676962] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.677028] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.677093] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.677160] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.677316] pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
[ 0.677329] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.677334] pci 0000:01:05.0: reg 0x14: [io 0x7000-0x70ff]
[ 0.677339] pci 0000:01:05.0: reg 0x18: [mem 0xf1400000-0xf140ffff]
[ 0.677350] pci 0000:01:05.0: reg 0x24: [mem 0xf1300000-0xf13fffff]
[ 0.677366] pci 0000:01:05.0: supports D1 D2
[ 0.677411] pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
[ 0.677423] pci 0000:01:05.1: reg 0x10: [mem 0xf1410000-0xf1413fff]
[ 0.677452] pci 0000:01:05.1: supports D1 D2
[ 0.677522] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.677526] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
[ 0.677529] pci 0000:00:01.0: bridge window [mem 0xf1300000-0xf14fffff]
[ 0.677533] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.677612] pci 0000:02:00.0: [1002:6760] type 00 class 0x030000
[ 0.677638] pci 0000:02:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.677649] pci 0000:02:00.0: reg 0x18: [mem 0xf0300000-0xf031ffff 64bit]
[ 0.677655] pci 0000:02:00.0: reg 0x20: [io 0x3000-0x30ff]
[ 0.677667] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.677704] pci 0000:02:00.0: supports D1 D2
[ 0.683613] pci 0000:00:03.0: PCI bridge to [bus 02-03]
[ 0.683621] pci 0000:00:03.0: bridge window [io 0x3000-0x6fff]
[ 0.683625] pci 0000:00:03.0: bridge window [mem 0xf0300000-0xf12fffff]
[ 0.683630] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.683730] pci 0000:04:00.0: [14e4:4727] type 00 class 0x028000
[ 0.683767] pci 0000:04:00.0: reg 0x10: [mem 0xf0200000-0xf0203fff 64bit]
[ 0.683863] pci 0000:04:00.0: supports D1 D2
[ 0.691617] pci 0000:00:05.0: PCI bridge to [bus 04]
[ 0.691628] pci 0000:00:05.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.691731] pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000
[ 0.691763] pci 0000:05:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.691785] pci 0000:05:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.691799] pci 0000:05:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.691860] pci 0000:05:00.0: supports D1 D2
[ 0.691862] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.699613] pci 0000:00:06.0: PCI bridge to [bus 05]
[ 0.699622] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 0.699627] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.699749] pci 0000:06:00.0: [10ec:5209] type 00 class 0xff0000
[ 0.699779] pci 0000:06:00.0: reg 0x10: [mem 0xf0100000-0xf0100fff]
[ 0.699877] pci 0000:06:00.0: supports D1 D2
[ 0.699879] pci 0000:06:00.0: PME# supported from D1 D2 D3hot
[ 0.707656] pci 0000:00:0a.0: PCI bridge to [bus 06]
[ 0.707666] pci 0000:00:0a.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.707780] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
[ 0.707789] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.707792] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.707794] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.707796] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 0.707798] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[ 0.707800] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 0.707802] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.707805] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.707807] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.707809] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.707811] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.707813] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.707815] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 0.707817] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[ 0.707819] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf6ffffff window] (subtractive decode)
[ 0.707821] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfed3ffff window] (subtractive decode)
[ 0.707823] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff window] (subtractive decode)
[ 0.708348] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.708416] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.708484] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.708550] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.708604] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.708647] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.708690] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.708733] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.912121] ACPI : EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62
[ 0.912326] vgaarb: setting as boot device: PCI:0000:01:05.0
[ 0.912330] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.912334] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
[ 0.912336] vgaarb: loaded
[ 0.912338] vgaarb: bridge control possible 0000:02:00.0
[ 0.912339] vgaarb: bridge control possible 0000:01:05.0
[ 0.912638] SCSI subsystem initialized
[ 0.912724] libata version 3.00 loaded.
[ 0.912749] ACPI: bus type USB registered
[ 0.912770] usbcore: registered new interface driver usbfs
[ 0.912781] usbcore: registered new interface driver hub
[ 0.912794] usbcore: registered new device driver usb
[ 0.912973] PCI: Using ACPI for IRQ routing
[ 0.913260] PCI: pci_cache_line_size set to 64 bytes
[ 0.913339] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.913341] e820: reserve RAM buffer [mem 0xce454000-0xcfffffff]
[ 0.913343] e820: reserve RAM buffer [mem 0xcfd3f000-0xcfffffff]
[ 0.913345] e820: reserve RAM buffer [mem 0xcff00000-0xcfffffff]
[ 0.913489] NetLabel: Initializing
[ 0.913490] NetLabel: domain hash size = 128
[ 0.913491] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.913505] NetLabel: unlabeled traffic allowed by default
[ 0.913667] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.913672] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.915754] clocksource: Switched to clocksource hpet
[ 0.924348] AppArmor: AppArmor Filesystem Enabled
[ 0.924444] pnp: PnP ACPI init
[ 0.924800] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.924803] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.924806] system 00:00: [mem 0xf7000000-0xf7ffffff] has been reserved
[ 0.924809] system 00:00: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.924811] system 00:00: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.924816] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.924972] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.925015] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.925049] pnp 00:03: Plug and Play ACPI device, IDs SYN1e43 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.925107] system 00:04: [io 0x0400-0x04cf] could not be reserved
[ 0.925110] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.925112] system 00:04: [io 0x04d6] has been reserved
[ 0.925114] system 00:04: [io 0x0550] has been reserved
[ 0.925116] system 00:04: [io 0x0680-0x06ff] has been reserved
[ 0.925119] system 00:04: [io 0x077a] has been reserved
[ 0.925121] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.925123] system 00:04: [io 0x0c14] has been reserved
[ 0.925125] system 00:04: [io 0x0c50-0x0c52] has been reserved
[ 0.925127] system 00:04: [io 0x0c6c] has been reserved
[ 0.925129] system 00:04: [io 0x0c6f] has been reserved
[ 0.925132] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
[ 0.925134] system 00:04: [io 0x0380-0x0387] has been reserved
[ 0.925137] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.925210] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.925213] system 00:05: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.925216] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.128102] pnp: PnP ACPI: found 6 devices
[ 1.135693] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.135740] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.135744] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
[ 1.135748] pci 0000:00:01.0: bridge window [mem 0xf1300000-0xf14fffff]
[ 1.135751] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.135766] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0320000-0xf033ffff pref]
[ 1.135769] pci 0000:00:03.0: PCI bridge to [bus 02-03]
[ 1.135771] pci 0000:00:03.0: bridge window [io 0x3000-0x6fff]
[ 1.135774] pci 0000:00:03.0: bridge window [mem 0xf0300000-0xf12fffff]
[ 1.135777] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.135781] pci 0000:00:05.0: PCI bridge to [bus 04]
[ 1.135785] pci 0000:00:05.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 1.135790] pci 0000:00:06.0: PCI bridge to [bus 05]
[ 1.135792] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 1.135796] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 1.135800] pci 0000:00:0a.0: PCI bridge to [bus 06]
[ 1.135804] pci 0000:00:0a.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 1.135809] pci 0000:00:14.4: PCI bridge to [bus 07]
[ 1.135823] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.135825] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.135827] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.135830] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 1.135832] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 1.135834] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 1.135836] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 1.135838] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 1.135841] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 1.135843] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 1.135845] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 1.135847] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 1.135849] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 1.135851] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 1.135854] pci_bus 0000:00: resource 18 [mem 0xd0000000-0xf6ffffff window]
[ 1.135856] pci_bus 0000:00: resource 19 [mem 0xf8000000-0xfed3ffff window]
[ 1.135858] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff window]
[ 1.135861] pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
[ 1.135863] pci_bus 0000:01: resource 1 [mem 0xf1300000-0xf14fffff]
[ 1.135865] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.135867] pci_bus 0000:02: resource 0 [io 0x3000-0x6fff]
[ 1.135869] pci_bus 0000:02: resource 1 [mem 0xf0300000-0xf12fffff]
[ 1.135872] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.135874] pci_bus 0000:04: resource 1 [mem 0xf0200000-0xf02fffff]
[ 1.135877] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 1.135879] pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 1.135881] pci_bus 0000:06: resource 1 [mem 0xf0100000-0xf01fffff]
[ 1.135884] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window]
[ 1.135886] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window]
[ 1.135888] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.135891] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 1.135893] pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 1.135895] pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 1.135897] pci_bus 0000:07: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 1.135899] pci_bus 0000:07: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 1.135902] pci_bus 0000:07: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 1.135904] pci_bus 0000:07: resource 13 [mem 0x000dc000-0x000dffff window]
[ 1.135906] pci_bus 0000:07: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 1.135908] pci_bus 0000:07: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 1.135910] pci_bus 0000:07: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 1.135912] pci_bus 0000:07: resource 17 [mem 0x000ec000-0x000effff window]
[ 1.135915] pci_bus 0000:07: resource 18 [mem 0xd0000000-0xf6ffffff window]
[ 1.135917] pci_bus 0000:07: resource 19 [mem 0xf8000000-0xfed3ffff window]
[ 1.135919] pci_bus 0000:07: resource 20 [mem 0xfed45000-0xffffffff window]
[ 1.135965] NET: Registered protocol family 2
[ 1.136176] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.136304] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.136516] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.136596] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.136638] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.136754] NET: Registered protocol family 1
[ 1.136774] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 2.004061] pci 0000:01:05.0: Video device with shadowed ROM
[ 2.004082] PCI: CLS 64 bytes, default 64
[ 2.004157] Trying to unpack rootfs image as initramfs...
[ 2.707537] Freeing initrd memory: 36724K (ffff880033836000 - ffff880035c13000)
[ 2.708005] PCI-DMA: Disabling AGP.
[ 2.708101] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 2.708103] PCI-DMA: using GART IOMMU.
[ 2.708106] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 2.711102] LVT offset 1 assigned for vector 0x400
[ 2.711117] IBS: LVT offset 1 assigned
[ 2.711185] perf: AMD IBS detected (0x0000001f)
[ 2.711327] Scanning for low memory corruption every 60 seconds
[ 2.711836] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 2.711885] audit: initializing netlink subsys (disabled)
[ 2.711909] audit: type=2000 audit(1477912520.600:1): initialized
[ 2.712290] Initialise system trusted keyring
[ 2.712552] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 2.712555] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.714436] zbud: loaded
[ 2.714893] VFS: Disk quotas dquot_6.6.0
[ 2.714940] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.715268] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.715770] fuse init (API version 7.23)
[ 2.716066] Key type big_key registered
[ 2.716097] Allocating IMA MOK and blacklist keyrings.
[ 2.716885] Key type asymmetric registered
[ 2.716891] Asymmetric key parser 'x509' registered
[ 2.716976] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.717037] io scheduler noop registered
[ 2.717040] io scheduler deadline registered (default)
[ 2.717078] io scheduler cfq registered
[ 2.717840] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.717847] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.717883] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[ 2.717885] vesafb: scrolling: redraw
[ 2.717887] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 2.717908] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000800000, using 5632k, total 5632k
[ 2.718160] Console: switching to colour frame buffer device 200x56
[ 2.718189] fb0: VESA VGA frame buffer device
[ 2.772172] ACPI: AC Adapter [ACAD] (on-line)
[ 2.772249] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 2.772254] ACPI: Power Button [PWRB]
[ 2.772315] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 2.772572] ACPI: Lid Switch [LID]
[ 2.772659] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.772663] ACPI: Power Button [PWRF]
[ 2.772711] ACPI: processor limited to max C-state 1
[ 2.773206] [Firmware Bug]: Invalid critical threshold (0)
[ 2.774337] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.774342] ACPI: Thermal Zone [THRM] (94 C)
[ 2.774417] GHES: HEST is not enabled!
[ 2.774587] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.778763] Linux agpgart interface v0.103
[ 2.783500] brd: module loaded
[ 2.785812] loop: module loaded
[ 2.786101] libphy: Fixed MDIO Bus: probed
[ 2.786105] tun: Universal TUN/TAP device driver, 1.6
[ 2.786106] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.786269] PPP generic driver version 2.4.2
[ 2.786429] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.786441] ehci-pci: EHCI PCI platform driver
[ 2.786600] QUIRK: Enable AMD PLL fix
[ 2.786631] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 2.786639] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.786645] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.786655] ehci-pci 0000:00:12.2: debug port 1
[ 2.786701] ehci-pci 0000:00:12.2: irq 17, io mem 0xf1508600
[ 2.795906] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.795971] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.795973] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.795976] usb usb1: Product: EHCI Host Controller
[ 2.795978] usb usb1: Manufacturer: Linux 4.4.0-45-generic ehci_hcd
[ 2.795980] usb usb1: SerialNumber: 0000:00:12.2
[ 2.796239] hub 1-0:1.0: USB hub found
[ 2.796248] hub 1-0:1.0: 5 ports detected
[ 2.796597] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.796604] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.796609] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.796619] ehci-pci 0000:00:13.2: debug port 1
[ 2.796653] ehci-pci 0000:00:13.2: irq 17, io mem 0xf1508500
[ 2.807904] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.807969] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.807972] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.807974] usb usb2: Product: EHCI Host Controller
[ 2.807976] usb usb2: Manufacturer: Linux 4.4.0-45-generic ehci_hcd
[ 2.807977] usb usb2: SerialNumber: 0000:00:13.2
[ 2.808207] hub 2-0:1.0: USB hub found
[ 2.808215] hub 2-0:1.0: 5 ports detected
[ 2.808535] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 2.808541] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 2.808546] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.808556] ehci-pci 0000:00:16.2: debug port 1
[ 2.808590] ehci-pci 0000:00:16.2: irq 17, io mem 0xf1508400
[ 2.819907] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.819972] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.819974] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.819976] usb usb3: Product: EHCI Host Controller
[ 2.819978] usb usb3: Manufacturer: Linux 4.4.0-45-generic ehci_hcd
[ 2.819980] usb usb3: SerialNumber: 0000:00:16.2
[ 2.820218] hub 3-0:1.0: USB hub found
[ 2.820226] hub 3-0:1.0: 4 ports detected
[ 2.820417] ehci-platform: EHCI generic platform driver
[ 2.820439] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.820445] ohci-pci: OHCI PCI platform driver
[ 2.820610] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 2.820616] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 2.820655] ohci-pci 0000:00:12.0: irq 18, io mem 0xf1507000
[ 2.879954] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.879959] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.879961] usb usb4: Product: OHCI PCI host controller
[ 2.879963] usb usb4: Manufacturer: Linux 4.4.0-45-generic ohci_hcd
[ 2.879965] usb usb4: SerialNumber: 0000:00:12.0
[ 2.880222] hub 4-0:1.0: USB hub found
[ 2.880235] hub 4-0:1.0: 5 ports detected
[ 2.880567] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.880574] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.880601] ohci-pci 0000:00:13.0: irq 18, io mem 0xf1506000
[ 2.939955] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.939960] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.939962] usb usb5: Product: OHCI PCI host controller
[ 2.939964] usb usb5: Manufacturer: Linux 4.4.0-45-generic ohci_hcd
[ 2.939966] usb usb5: SerialNumber: 0000:00:13.0
[ 2.940219] hub 5-0:1.0: USB hub found
[ 2.940231] hub 5-0:1.0: 5 ports detected
[ 2.940538] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 2.940545] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 2.940572] ohci-pci 0000:00:14.5: irq 18, io mem 0xf1505000
[ 2.979647] ACPI: Battery Slot [BAT0] (battery present)
[ 2.999955] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.999960] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.999962] usb usb6: Product: OHCI PCI host controller
[ 2.999964] usb usb6: Manufacturer: Linux 4.4.0-45-generic ohci_hcd
[ 2.999966] usb usb6: SerialNumber: 0000:00:14.5
[ 3.000218] hub 6-0:1.0: USB hub found
[ 3.000230] hub 6-0:1.0: 2 ports detected
[ 3.000511] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 3.000517] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 3.000546] ohci-pci 0000:00:16.0: irq 18, io mem 0xf1504000
[ 3.059956] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.059960] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.059963] usb usb7: Product: OHCI PCI host controller
[ 3.059964] usb usb7: Manufacturer: Linux 4.4.0-45-generic ohci_hcd
[ 3.059966] usb usb7: SerialNumber: 0000:00:16.0
[ 3.060246] hub 7-0:1.0: USB hub found
[ 3.060257] hub 7-0:1.0: 4 ports detected
[ 3.060439] ohci-platform: OHCI generic platform driver
[ 3.060457] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.060550] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.080917] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.080922] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.081221] mousedev: PS/2 mouse device common for all mice
[ 3.081692] rtc_cmos 00:01: RTC can wake from S4
[ 3.081871] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 3.081896] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
[ 3.081906] i2c /dev entries driver
[ 3.081978] device-mapper: uevent: version 1.0.3
[ 3.082095] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 3.082118] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.082681] NET: Registered protocol family 10
[ 3.083062] NET: Registered protocol family 17
[ 3.083093] Key type dns_resolver registered
[ 3.083404] microcode: CPU0: patch_level=0x010000c8
[ 3.083429] microcode: CPU1: patch_level=0x010000c8
[ 3.083511] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.083938] registered taskstats version 1
[ 3.083956] Loading compiled-in X.509 certificates
[ 3.085258] Loaded X.509 cert 'Build time autogenerated kernel key: 5295ae568fdd4deae5e4e5c175542790e6aaeab9'
[ 3.085284] zswap: loaded using pool lzo/zbud
[ 3.088313] Key type trusted registered
[ 3.093454] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.094214] Key type encrypted registered
[ 3.094225] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.094230] ima: No TPM chip found, activating TPM-bypass!
[ 3.094262] evm: HMAC attrs: 0x1
[ 3.094920] Magic number: 4:241:278
[ 3.094973] tty tty15: hash matches
[ 3.095059] rtc_cmos 00:01: setting system clock to 2016-10-31 11:15:21 UTC (1477912521)
[ 3.095189] acpi-cpufreq: overriding BIOS provided _PSD data
[ 3.095281] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.095282] EDD information not available.
[ 3.095362] PM: Hibernation image not present or could not be loaded.
[ 3.097359] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[ 3.097364] Write protecting the kernel read-only data: 14336k
[ 3.098531] Freeing unused kernel memory: 1820K (ffff880001839000 - ffff880001a00000)
[ 3.099115] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[ 3.108813] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 3.116621] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[ 3.116723] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[ 3.116740] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[ 3.117624] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[ 3.117694] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[ 3.117878] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[ 3.117947] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[ 3.118010] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[ 3.118073] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[ 3.118133] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[ 3.271228] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 3.276020] usb 5-2: new low-speed USB device number 2 using ohci-pci
[ 3.276945] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 3.284622] acpi device:03: registered as cooling_device2
[ 3.284708] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5
[ 3.285045] ACPI: Video Device [VGA2] (multi-head: yes rom: no post: no)
[ 3.288682] usb 1-3: New USB device found, idVendor=0c45, idProduct=6321
[ 3.288687] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 3.288690] usb 1-3: Product: HP Webcam-101
[ 3.288692] usb 1-3: Manufacturer: DC01901LAA6MHC
[ 3.299098] [drm] Initialized drm 1.1.0 20060810
[ 3.302785] wmi: Mapper loaded
[ 3.310922] acpi device:0e: registered as cooling_device3
[ 3.310989] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/LNXVIDEO:02/input/input6
[ 3.319258] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.319273] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.319794] r8169 0000:05:00.0 eth0: RTL8105e at 0xffffc900007a8000, 98:4b:e1:b7:fd:bb, XID 00a00000 IRQ 28
[ 3.323540] rtsx_pci 0000:06:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 29
[ 3.328965] ahci 0000:00:11.0: version 3.0
[ 3.329214] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 3.329219] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 3.335889] scsi host0: ahci
[ 3.370500] scsi host1: ahci
[ 3.370602] ata1: SATA max UDMA/133 abar m1024@0xf1508000 port 0xf1508100 irq 19
[ 3.370606] ata2: SATA max UDMA/133 abar m1024@0xf1508000 port 0xf1508180 irq 19
[ 3.381863] [drm] radeon kernel modesetting enabled.
[ 3.381885] vga_switcheroo: detected switching method \_SB_.PCI0.AGP_.VGA_.ATPX handle
[ 3.384978] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 3.384982] AMD IOMMUv2 functionality not available on this system
[ 3.388951] CRAT table not found
[ 3.388956] Finished initializing topology ret=0
[ 3.389019] kfd kfd: Initialized module
[ 3.389365] checking generic (d0000000 580000) vs hw (d0000000 10000000)
[ 3.389367] fb: switching to radeondrmfb from VESA VGA
[ 3.389410] Console: switching to colour dummy device 80x25
[ 3.389831] [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x1665).
[ 3.389849] [drm] register mmio base: 0xF1400000
[ 3.389850] [drm] register mmio size: 65536
[ 3.389919] ATOM BIOS: HP_Rocky
[ 3.389946] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 3.389949] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 3.389954] [drm] Detected VRAM RAM=256M, BAR=256M
[ 3.389956] [drm] RAM width 32bits DDR
[ 3.390032] [TTM] Zone kernel: Available graphics memory: 1891996 kiB
[ 3.390033] [TTM] Initializing pool allocator
[ 3.390039] [TTM] Initializing DMA pool allocator
[ 3.390069] [drm] radeon: 256M of VRAM memory ready
[ 3.390071] [drm] radeon: 512M of GTT memory ready.
[ 3.390082] [drm] Loading RS780 Microcode
[ 3.390169] [drm] radeon: power management initialized
[ 3.390275] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 3.398397] [drm] PCIE GART of 512M enabled (table at 0x00000000C0258000).
[ 3.398491] radeon 0000:01:05.0: WB enabled
[ 3.398496] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800cd8c4c00
[ 3.404452] radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x00000000c0056038 and cpu addr 0xffffc90001416038
[ 3.404485] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.404486] [drm] Driver supports precise vblank timestamp query.
[ 3.404488] radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[ 3.404505] [drm] radeon: irq initialized.
[ 3.411190] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 3.436594] [drm] ring test on 0 succeeded in 1 usecs
[ 3.447025] usb 5-2: New USB device found, idVendor=046d, idProduct=c077
[ 3.447030] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.447033] usb 5-2: Product: USB Optical Mouse
[ 3.447035] usb 5-2: Manufacturer: Logitech
[ 3.454380] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.461221] usbcore: registered new interface driver usbhid
[ 3.461225] usbhid: USB HID core driver
[ 3.464163] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/0003:046D:C077.0001/input/input8
[ 3.464551] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-2/input0
[ 3.611639] [drm] ring test on 5 succeeded in 1 usecs
[ 3.611644] [drm] UVD initialized successfully.
[ 3.611824] [drm] ib test on ring 0 succeeded in 0 usecs
[ 3.760893] tsc: Refined TSC clocksource calibration: 2294.254 MHz
[ 3.760896] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21120101e4c, max_idle_ns: 440795227753 ns
[ 3.859925] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.863901] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.866019] ata2.00: ATAPI: hp CDDVDW TS-L633R, 0300, max UDMA/100
[ 3.870643] ata2.00: configured for UDMA/100
[ 3.870869] ata1.00: ATA-8: ST9500325AS, 0005HPM1, max UDMA/100
[ 3.870874] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.894863] ata1.00: configured for UDMA/100
[ 3.895229] scsi 0:0:0:0: Direct-Access ATA ST9500325AS HPM1 PQ: 0 ANSI: 5
[ 3.895750] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 3.895797] sd 0:0:0:0: [sda] Write Protect is off
[ 3.895800] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.895831] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.895902] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.898666] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-L633R 0300 PQ: 0 ANSI: 5
[ 3.920251] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.920256] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.920446] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.920513] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.950061] sda: sda1 sda2 < sda5 >
[ 3.950727] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.185300] psmouse serio1: synaptics: queried max coordinates: x [..5728], y [..4828]
[ 4.259921] [drm] ib test on ring 5 succeeded
[ 4.260878] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1678, fw id: 706628
[ 4.261168] [drm] radeon atom DIG backlight initialized
[ 4.261171] [drm] Radeon Display Connectors
[ 4.261172] [drm] Connector 0:
[ 4.261173] [drm] VGA-1
[ 4.261176] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 4.261177] [drm] Encoders:
[ 4.261178] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.261179] [drm] Connector 1:
[ 4.261180] [drm] LVDS-1
[ 4.261182] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 4.261183] [drm] Encoders:
[ 4.261184] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 4.261185] [drm] Connector 2:
[ 4.261186] [drm] HDMI-A-1
[ 4.261187] [drm] HPD1
[ 4.261189] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 4.261190] [drm] Encoders:
[ 4.261191] [drm] DFP1: INTERNAL_UNIPHY
[ 4.309465] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 4.760023] clocksource: Switched to clocksource tsc
[ 5.251290] [drm] fb mappable at 0xD0359000
[ 5.251294] [drm] vram apper at 0xD0000000
[ 5.251295] [drm] size 5787648
[ 5.251297] [drm] fb depth is 24
[ 5.251298] [drm] pitch is 6400
[ 5.251424] fbcon: radeondrmfb (fb0) is primary device
[ 5.251528] Console: switching to colour frame buffer device 200x56
[ 5.251559] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 5.260082] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:05.0 on minor 0
[ 5.260158] radeon 0000:02:00.0: enabling device (0100 -> 0103)
[ 5.260441] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x103C:0x1665).
[ 5.260458] [drm] register mmio base: 0xF0300000
[ 5.260459] [drm] register mmio size: 131072
[ 5.260461] vga_switcheroo: enabled
[ 5.260576] ATPX version 1, functions 0x000001a2
[ 5.340572] ATOM BIOS: HP
[ 5.341068] radeon 0000:02:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 5.341071] radeon 0000:02:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 5.341073] [drm] Detected VRAM RAM=512M, BAR=256M
[ 5.341075] [drm] RAM width 64bits DDR
[ 5.341094] [drm] radeon: 512M of VRAM memory ready
[ 5.341095] [drm] radeon: 512M of GTT memory ready.
[ 5.341107] [drm] Loading CAICOS Microcode
[ 5.341243] [drm] Internal thermal controller with fan control
[ 5.345624] [drm] radeon: dpm initialized
[ 5.345819] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.346788] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 5.348827] [drm] PCIE GART of 512M enabled (table at 0x0000000000274000).
[ 5.348946] radeon 0000:02:00.0: WB enabled
[ 5.348950] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800ccc27c00
[ 5.348952] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800ccc27c0c
[ 5.350486] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90000c32118
[ 5.350492] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.350494] [drm] Driver supports precise vblank timestamp query.
[ 5.350495] radeon 0000:02:00.0: radeon: MSI limited to 32-bit
[ 5.350539] radeon 0000:02:00.0: radeon: using MSI.
[ 5.350593] [drm] radeon: irq initialized.
[ 5.367130] [drm] ring test on 0 succeeded in 2 usecs
[ 5.367142] [drm] ring test on 3 succeeded in 7 usecs
[ 5.543513] [drm] ring test on 5 succeeded in 2 usecs
[ 5.543523] [drm] UVD initialized successfully.
[ 5.543717] [drm] ib test on ring 0 succeeded in 0 usecs
[ 5.543800] [drm] ib test on ring 3 succeeded in 0 usecs
[ 6.192069] [drm] ib test on ring 5 succeeded
[ 6.193285] [drm] Radeon Display Connectors
[ 6.257749] [drm] Initialized radeon 2.43.0 20080528 for 0000:02:00.0 on minor 1
[ 6.517333] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.082206] random: nonblocking pool is initialized
[ 8.275350] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 8.275515] systemd[1]: Detected architecture x86-64.
[ 8.282394] systemd[1]: Set hostname to <steevencomputer>.
[ 10.481041] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 10.481123] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 10.481221] systemd[1]: Listening on Journal Audit Socket.
[ 10.481249] systemd[1]: Listening on udev Kernel Socket.
[ 10.481311] systemd[1]: Listening on Journal Socket.
[ 10.481344] systemd[1]: Listening on Syslog Socket.
[ 10.481358] systemd[1]: Reached target User and Group Name Lookups.
[ 10.481383] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 10.481399] systemd[1]: Reached target Encrypted Volumes.
[ 10.481435] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 10.481480] systemd[1]: Listening on udev Control Socket.
[ 10.481493] systemd[1]: Reached target Remote File Systems (Pre).
[ 10.481504] systemd[1]: Reached target Remote File Systems.
[ 10.481620] systemd[1]: Created slice System Slice.
[ 10.532147] systemd[1]: Mounting POSIX Message Queue File System...
[ 10.533012] systemd[1]: Starting Set console keymap...
[ 10.533777] systemd[1]: Mounting Debug File System...
[ 10.534705] systemd[1]: Starting Uncomplicated firewall...
[ 10.535611] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 10.536537] systemd[1]: Mounting Huge Pages File System...
[ 10.537482] systemd[1]: Started Read required files in advance.
[ 10.538606] systemd[1]: Listening on Journal Socket (/dev/log).
[ 10.539479] systemd[1]: Starting Journal Service...
[ 10.540511] systemd[1]: Started Braille Device Support.
[ 10.540801] systemd[1]: Created slice User and Session Slice.
[ 10.540824] systemd[1]: Reached target Slices.
[ 10.748259] systemd[1]: Starting Load Kernel Modules...
[ 10.836558] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 10.848322] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 11.034352] systemd[1]: Started Uncomplicated firewall.
[ 11.400229] lp: driver loaded but no devices found
[ 11.441303] systemd[1]: Mounted POSIX Message Queue File System.
[ 11.441359] systemd[1]: Mounted Huge Pages File System.
[ 11.441376] systemd[1]: Mounted Debug File System.
[ 11.475142] ppdev: user-space parallel port driver
[ 11.694985] systemd[1]: Started Load Kernel Modules.
[ 11.704349] systemd[1]: Starting Apply Kernel Variables...
[ 11.705302] systemd[1]: Mounting FUSE Control File System...
[ 11.713006] systemd[1]: Mounted FUSE Control File System.
[ 11.840895] systemd[1]: Started Journal Service.
[ 13.149329] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 13.531377] systemd-journald[231]: Received request to flush runtime journal from PID 1
[ 14.905937] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.579918] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[ 15.579943] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 15.579961] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 15.579995] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 15.594322] bcma: bus0: Bus registered
[ 15.717401] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB_.PCI0.SMBS.SMBI) (20150930/utaddress-254)
[ 15.717411] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.869017] EDAC MC: Ver: 3.0.0
[ 15.956303] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input9
[ 15.970089] MCE: In-kernel MCE decoding enabled.
[ 16.059725] AMD64 EDAC driver v3.4.0
[ 16.059762] EDAC amd64: DRAM ECC disabled.
[ 16.059767] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 16.333548] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 16.333557] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.333560] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 16.333562] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 16.333564] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 16.333567] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
[ 16.333569] snd_hda_codec_idt hdaudioC0D0: Mic=0xc
[ 16.364921] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 16.365040] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 16.536790] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 16.539588] [drm] PCIE GART of 512M enabled (table at 0x0000000000274000).
[ 16.539685] radeon 0000:02:00.0: WB enabled
[ 16.539689] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800ccc27c00
[ 16.539693] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800ccc27c0c
[ 16.541257] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90000c32118
[ 16.557525] [drm] ring test on 0 succeeded in 2 usecs
[ 16.557538] [drm] ring test on 3 succeeded in 7 usecs
[ 16.733898] [drm] ring test on 5 succeeded in 2 usecs
[ 16.733907] [drm] UVD initialized successfully.
[ 16.734001] [drm] ib test on ring 0 succeeded in 0 usecs
[ 16.734084] [drm] ib test on ring 3 succeeded in 0 usecs
[ 16.960734] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[ 16.960743] ACPI Error: Method parse/execution failed [\_SB.WMID.HWMC] (Node ffff88011b4c00c8), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 16.960753] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff88011b4c02d0), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 16.960787] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[ 16.960791] ACPI Error: Method parse/execution failed [\_SB.WMID.HWMC] (Node ffff88011b4c00c8), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 16.960797] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff88011b4c02d0), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 16.960826] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[ 16.960830] ACPI Error: Method parse/execution failed [\_SB.WMID.HWMC] (Node ffff88011b4c00c8), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 16.960836] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff88011b4c02d0), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 16.960907] input: HP WMI hotkeys as /devices/virtual/input/input12
[ 16.961067] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[ 16.961071] ACPI Error: Method parse/execution failed [\_SB.WMID.HWMC] (Node ffff88011b4c00c8), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 16.961078] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff88011b4c02d0), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 16.961108] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[ 16.961111] ACPI Error: Method parse/execution failed [\_SB.WMID.HWMC] (Node ffff88011b4c00c8), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 16.961118] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff88011b4c02d0), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[ 17.132946] media: Linux media interface: v0.10
[ 17.156107] kvm: disabled by bios
[ 17.188765] kvm: disabled by bios
[ 17.191347] Linux video capture interface: v2.00
[ 17.384271] [drm] ib test on ring 5 succeeded
[ 17.847322] uvcvideo: Found UVC 1.00 device HP Webcam-101 (0c45:6321)
[ 17.861353] input: HP Webcam-101 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input13
[ 17.861579] usbcore: registered new interface driver uvcvideo
[ 17.861584] USB Video Class driver (1.1.1)
[ 18.065129] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[ 18.065139] b43: probe of bcma0:1 failed with error -524
[ 18.065164] Broadcom 43xx driver loaded [ Features: PNL ]
[ 19.025030] brcmsmac bcma0:1: mfg 4bf core 812 rev 24 class 0 irq 17
[ 19.140126] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 19.140511] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 499
[ 19.141693] brcmsmac bcma0:1 wlp4s0b1: renamed from wlan0
[ 19.585584] cfg80211: World regulatory domain updated:
[ 19.585591] cfg80211: DFS Master region: unset
[ 19.585593] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 19.585596] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.585598] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.585600] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.585602] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 19.585605] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 19.585607] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 19.585609] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.585610] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 19.593537] cfg80211: Regulatory domain changed to country: US
[ 19.593543] cfg80211: DFS Master region: FCC
[ 19.593546] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 19.593548] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 19.593551] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[ 19.593553] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 19.593555] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
[ 19.593557] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 19.593558] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 20.100359] audit: type=1400 audit(1477912538.500:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=598 comm="apparmor_parser"
[ 20.100371] audit: type=1400 audit(1477912538.500:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=598 comm="apparmor_parser"
[ 20.100378] audit: type=1400 audit(1477912538.500:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=598 comm="apparmor_parser"
[ 20.100384] audit: type=1400 audit(1477912538.500:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=598 comm="apparmor_parser"
[ 20.149181] audit: type=1400 audit(1477912538.548:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=597 comm="apparmor_parser"
[ 20.149194] audit: type=1400 audit(1477912538.548:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=597 comm="apparmor_parser"
[ 20.212923] audit: type=1400 audit(1477912538.612:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=601 comm="apparmor_parser"
[ 20.212937] audit: type=1400 audit(1477912538.612:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=601 comm="apparmor_parser"
[ 20.256430] audit: type=1400 audit(1477912538.656:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=602 comm="apparmor_parser"
[ 20.256443] audit: type=1400 audit(1477912538.656:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=602 comm="apparmor_parser"
[ 21.696681] Adding 3924988k swap on /dev/sda5. Priority:-1 extents:1 across:3924988k FS
[ 25.445124] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 25.447870] [drm] PCIE GART of 512M enabled (table at 0x0000000000274000).
[ 25.447966] radeon 0000:02:00.0: WB enabled
[ 25.447970] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800ccc27c00
[ 25.447973] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800ccc27c0c
[ 25.449582] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90000c32118
[ 25.465974] [drm] ring test on 0 succeeded in 2 usecs
[ 25.465986] [drm] ring test on 3 succeeded in 7 usecs
[ 25.642379] [drm] ring test on 5 succeeded in 2 usecs
[ 25.642393] [drm] UVD initialized successfully.
[ 25.642490] [drm] ib test on ring 0 succeeded in 0 usecs
[ 25.642575] [drm] ib test on ring 3 succeeded in 0 usecs
[ 26.292411] [drm] ib test on ring 5 succeeded
[ 30.872934] IPv6: ADDRCONF(NETDEV_UP): wlp4s0b1: link is not ready
[ 31.099958] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 31.099971] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 31.100119] IPv6: ADDRCONF(NETDEV_UP): wlp4s0b1: link is not ready
[ 31.106352] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 31.306567] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 31.306573] vgaarb: device changed decodes: PCI:0000:01:05.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 31.347239] r8169 0000:05:00.0 enp5s0: link down
[ 31.347294] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 31.827583] IPv6: ADDRCONF(NETDEV_UP): wlp4s0b1: link is not ready
[ 283.919323] wlp4s0b1: authenticate with 30:7e:cb:65:89:74
[ 283.921952] wlp4s0b1: send auth to 30:7e:cb:65:89:74 (try 1/3)
[ 283.924160] wlp4s0b1: authenticated
[ 283.925370] brcmsmac bcma0:1 wlp4s0b1: disabling HT/VHT due to WEP/TKIP use
[ 283.928863] wlp4s0b1: associate with 30:7e:cb:65:89:74 (try 1/3)
[ 283.931113] wlp4s0b1: RX AssocResp from 30:7e:cb:65:89:74 (capab=0x411 status=0 aid=2)
[ 283.931669] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[ 283.931675] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 283.931688] wlp4s0b1: associated
[ 283.931747] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0b1: link becomes ready
[ 284.555951] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 4723.843287] perf interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[11955.955480] perf interrupt took too long (5023 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[12044.783295] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 0 addresses (implement)
[12044.886939] wlp4s0b1: deauthenticating from 30:7e:cb:65:89:74 by local choice (Reason: 3=DEAUTH_LEAVING)
[12044.888207] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[12044.888225] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[12051.409043] PM: Syncing filesystems ... done.
[12051.931221] PM: Preparing system for sleep (mem)
[12052.302053] Freezing user space processes ... (elapsed 0.062 seconds) done.
[12052.364741] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[12052.366465] PM: Suspending system (mem)
[12052.366884] Suspending console(s) (use no_console_suspend to debug)
[12052.367640] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[12052.429580] i8042 aux 00:03: System wakeup disabled by ACPI
[12052.429653] i8042 kbd 00:02: System wakeup enabled by ACPI
[12052.597997] sd 0:0:0:0: [sda] Stopping disk
[12052.831540] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[12052.835645] [drm] PCIE GART of 512M enabled (table at 0x0000000000274000).
[12052.835752] radeon 0000:02:00.0: WB enabled
[12052.835760] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800ccc27c00
[12052.835766] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800ccc27c0c
[12052.837323] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90000c32118
[12052.853608] [drm] ring test on 0 succeeded in 2 usecs
[12052.853622] [drm] ring test on 3 succeeded in 7 usecs
[12053.030274] [drm] ring test on 5 succeeded in 2 usecs
[12053.030285] [drm] UVD initialized successfully.
[12053.030387] [drm] ib test on ring 0 succeeded in 0 usecs
[12053.030477] [drm] ib test on ring 3 succeeded in 0 usecs
[12053.680598] [drm] ib test on ring 5 succeeded
[12054.060594] PM: suspend of devices complete after 1693.288 msecs
[12054.061468] PM: late suspend of devices complete after 0.867 msecs
[12054.062240] pcieport 0000:00:06.0: System wakeup enabled by ACPI
[12054.062621] ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
[12054.062792] ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
[12054.062799] ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
[12054.062875] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
[12054.062882] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
[12054.076773] PM: noirq suspend of devices complete after 15.293 msecs
[12054.076907] ACPI: Preparing to enter system sleep state S3
[12054.167280] ACPI : EC: EC stopped
[12054.167283] PM: Saving platform NVS memory
[12054.175001] Disabling non-boot CPUs ...
[12054.175655] Broke affinity for irq 1
[12054.175665] Broke affinity for irq 9
[12054.175671] Broke affinity for irq 12
[12054.175677] Broke affinity for irq 17
[12054.175682] Broke affinity for irq 18
[12054.175686] Broke affinity for irq 19
[12054.175695] Broke affinity for irq 30
[12054.176784] smpboot: CPU 1 is now offline
[12054.189722] ACPI: Low-level resume complete
[12054.189768] ACPI : EC: EC started
[12054.189769] PM: Restoring platform NVS memory
[12054.191663] PCI-DMA: Resuming GART IOMMU
[12054.191664] PCI-DMA: Restoring GART aperture settings
[12054.191671] LVT offset 1 assigned for vector 0x400
[12054.191680] IBS: LVT offset 1 assigned
[12054.191988] Enabling non-boot CPUs ...
[12054.211033] x86: Booting SMP configuration:
[12054.211035] smpboot: Booting Node 0 Processor 1 APIC 0x1
[12054.213234] process: Switch to broadcast mode on CPU1
[12054.213394] cache: parent cpu1 should not be sleeping
[12054.213547] CPU1 is up
[12054.214515] ACPI: Waking up from system sleep state S3
[12054.317521] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
[12054.317560] ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
[12054.331103] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
[12054.331280] ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
[12054.331345] ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
[12054.331416] PM: noirq resume of devices complete after 14.195 msecs
[12054.331791] PM: early resume of devices complete after 0.353 msecs
[12054.334109] pcieport 0000:00:06.0: System wakeup disabled by ACPI
[12054.339641] [drm] PCIE GART of 512M enabled (table at 0x00000000C0258000).
[12054.339688] radeon 0000:01:05.0: WB enabled
[12054.339691] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800cd8c4c00
[12054.345255] radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x00000000c0056038 and cpu addr 0xffffc90001416038
[12054.357353] sd 0:0:0:0: [sda] Starting disk
[12054.377171] [drm] ring test on 0 succeeded in 1 usecs
[12054.551818] [drm] ring test on 5 succeeded in 1 usecs
[12054.551823] [drm] UVD initialized successfully.
[12054.551846] [drm] ib test on ring 0 succeeded in 0 usecs
[12054.553732] r8169 0000:05:00.0 enp5s0: link down
[12054.591253] rtc_cmos 00:01: System wakeup disabled by ACPI
[12054.591302] i8042 kbd 00:02: System wakeup disabled by ACPI
[12054.610822] usb 1-3: reset high-speed USB device number 2 using ehci-pci
[12054.846890] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[12054.865480] ata2.00: configured for UDMA/100
[12055.198879] [drm] ib test on ring 5 succeeded
[12055.349070] psmouse serio1: synaptics: queried max coordinates: x [..5728], y [..4828]
[12056.694933] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[12056.729922] ata1.00: configured for UDMA/100
[12060.570680] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[12060.573433] [drm] PCIE GART of 512M enabled (table at 0x0000000000274000).
[12060.573525] radeon 0000:02:00.0: WB enabled
[12060.573528] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800ccc27c00
[12060.573530] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800ccc27c0c
[12060.575075] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90000c32118
[12060.591546] [drm] ring test on 0 succeeded in 2 usecs
[12060.591557] [drm] ring test on 3 succeeded in 7 usecs
[12060.767916] [drm] ring test on 5 succeeded in 2 usecs
[12060.767925] [drm] UVD initialized successfully.
[12060.768017] [drm] ib test on ring 0 succeeded in 0 usecs
[12060.768100] [drm] ib test on ring 3 succeeded in 0 usecs
[12061.415118] [drm] ib test on ring 5 succeeded
[12061.815384] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[12061.815390] ACPI Error: Method parse/execution failed [\_SB.WMID.HWMC] (Node ffff88011b4c00c8), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[12061.815397] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff88011b4c02d0), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[12061.815429] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[12061.815433] ACPI Error: Method parse/execution failed [\_SB.WMID.HWMC] (Node ffff88011b4c00c8), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[12061.815438] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff88011b4c02d0), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[12061.815450] PM: resume of devices complete after 7483.509 msecs
[12061.815768] PM: Finishing wakeup.
[12061.815770] Restarting tasks ... done.
[12061.843708] video LNXVIDEO:00: Restoring backlight state
[12061.845903] video LNXVIDEO:02: Restoring backlight state
[12064.109284] cfg80211: World regulatory domain updated:
[12064.109296] cfg80211: DFS Master region: unset
[12064.109300] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[12064.109304] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[12064.109306] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[12064.109308] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[12064.109310] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[12064.109313] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[12064.109315] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[12064.109316] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[12064.109318] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[12064.345052] IPv6: ADDRCONF(NETDEV_UP): wlp4s0b1: link is not ready
[12064.419419] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[12064.419434] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[12064.419591] IPv6: ADDRCONF(NETDEV_UP): wlp4s0b1: link is not ready
[12064.424462] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[12064.617924] r8169 0000:05:00.0 enp5s0: link down
[12064.618005] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[12064.963278] IPv6: ADDRCONF(NETDEV_UP): wlp4s0b1: link is not ready
[12065.676068] wlp4s0b1: authenticate with 30:7e:cb:65:89:74
[12065.676175] wlp4s0b1: send auth to 30:7e:cb:65:89:74 (try 1/3)
[12065.677725] wlp4s0b1: authenticated
[12065.677968] brcmsmac bcma0:1 wlp4s0b1: disabling HT/VHT due to WEP/TKIP use
[12065.679476] wlp4s0b1: associate with 30:7e:cb:65:89:74 (try 1/3)
[12065.683568] wlp4s0b1: RX AssocResp from 30:7e:cb:65:89:74 (capab=0x411 status=0 aid=4)
[12065.684000] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[12065.684005] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[12065.684017] wlp4s0b1: associated
[12065.684129] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0b1: link becomes ready
[12066.078008] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[13077.530787] usb 1-1: new high-speed USB device number 3 using ehci-pci
[13077.773353] usb 1-1: New USB device found, idVendor=18a5, idProduct=0243
[13077.773367] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13077.773374] usb 1-1: Product: STORE N GO
[13077.773380] usb 1-1: Manufacturer: Verbatim
[13077.773385] usb 1-1: SerialNumber: 070B616477266016
[13078.257063] usb-storage 1-1:1.0: USB Mass Storage device detected
[13078.257208] scsi host2: usb-storage 1-1:1.0
[13078.258103] usbcore: registered new interface driver usb-storage
[13078.286955] usbcore: registered new interface driver uas
[13079.257089] scsi 2:0:0:0: Direct-Access Verbatim STORE N GO PMAP PQ: 0 ANSI: 6
[13079.258136] sd 2:0:0:0: Attached scsi generic sg2 type 0
[13079.261006] sd 2:0:0:0: [sdb] 60506112 512-byte logical blocks: (31.0 GB/28.9 GiB)
[13079.261776] sd 2:0:0:0: [sdb] Write Protect is off
[13079.261792] sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 00
[13079.264532] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[13079.749284] sdb: sdb1
[13079.763865] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[13080.879591] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[13733.659939] usb 1-1: USB disconnect, device number 3
[17161.329146] CE: hpet increased min_delta_ns to 20115 nsec
[20341.095158] wlp4s0b1: deauthenticating from 30:7e:cb:65:89:74 by local choice (Reason: 3=DEAUTH_LEAVING)
[20341.096405] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[20341.096420] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[20341.096424] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[20341.109235] cfg80211: World regulatory domain updated:
[20341.109242] cfg80211: DFS Master region: unset
[20341.109244] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[20341.109247] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[20341.109250] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[20341.109252] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[20341.109254] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[20341.109256] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[20341.109258] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[20341.109260] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[20341.109262] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[20343.562444] PM: Syncing filesystems ... done.
[20343.933049] PM: Preparing system for sleep (mem)
[20343.933699] Freezing user space processes ... (elapsed 0.004 seconds) done.
[20343.938471] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[20343.940074] PM: Suspending system (mem)
[20343.940343] Suspending console(s) (use no_console_suspend to debug)
[20343.942299] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[20344.002205] i8042 aux 00:03: System wakeup disabled by ACPI
[20344.002234] i8042 kbd 00:02: System wakeup enabled by ACPI
[20344.151012] sd 0:0:0:0: [sda] Stopping disk
[20344.403169] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[20344.405959] [drm] PCIE GART of 512M enabled (table at 0x0000000000274000).
[20344.406052] radeon 0000:02:00.0: WB enabled
[20344.406056] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800ccc27c00
[20344.406058] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800ccc27c0c
[20344.407614] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90000c32118
[20344.424084] [drm] ring test on 0 succeeded in 2 usecs
[20344.424095] [drm] ring test on 3 succeeded in 7 usecs
[20344.600460] [drm] ring test on 5 succeeded in 2 usecs
[20344.600469] [drm] UVD initialized successfully.
[20344.600563] [drm] ib test on ring 0 succeeded in 0 usecs
[20344.600645] [drm] ib test on ring 3 succeeded in 0 usecs
[20345.250422] [drm] ib test on ring 5 succeeded
[20345.594478] PM: suspend of devices complete after 1653.601 msecs
[20345.595001] PM: late suspend of devices complete after 0.517 msecs
[20345.595440] pcieport 0000:00:06.0: System wakeup enabled by ACPI
[20345.595649] ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
[20345.595794] ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
[20345.595797] ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
[20345.595848] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
[20345.595860] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
[20345.610528] PM: noirq suspend of devices complete after 15.520 msecs
[20345.610588] ACPI: Preparing to enter system sleep state S3
[20345.700697] ACPI : EC: EC stopped
[20345.700698] PM: Saving platform NVS memory
[20345.705009] Disabling non-boot CPUs ...
[20345.705292] Broke affinity for irq 1
[20345.705298] Broke affinity for irq 9
[20345.705303] Broke affinity for irq 12
[20345.705307] Broke affinity for irq 17
[20345.705310] Broke affinity for irq 18
[20345.705313] Broke affinity for irq 19
[20345.705319] Broke affinity for irq 30
[20345.706369] smpboot: CPU 1 is now offline
[20345.719041] ACPI: Low-level resume complete
[20345.719087] ACPI : EC: EC started
[20345.719088] PM: Restoring platform NVS memory
[20345.720945] PCI-DMA: Resuming GART IOMMU
[20345.720945] PCI-DMA: Restoring GART aperture settings
[20345.720953] LVT offset 1 assigned for vector 0x400
[20345.720961] IBS: LVT offset 1 assigned
[20345.721268] Enabling non-boot CPUs ...
[20345.740926] x86: Booting SMP configuration:
[20345.740928] smpboot: Booting Node 0 Processor 1 APIC 0x1
[20345.743126] process: Switch to broadcast mode on CPU1
[20345.743283] cache: parent cpu1 should not be sleeping
[20345.743443] CPU1 is up
[20345.744400] ACPI: Waking up from system sleep state S3
[20345.847409] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
[20345.847448] ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
[20345.861036] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
[20345.861203] ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
[20345.861223] ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
[20345.861318] PM: noirq resume of devices complete after 14.215 msecs
[20345.861711] PM: early resume of devices complete after 0.365 msecs
[20345.864025] pcieport 0000:00:06.0: System wakeup disabled by ACPI
[20345.869539] [drm] PCIE GART of 512M enabled (table at 0x00000000C0258000).
[20345.869586] radeon 0000:01:05.0: WB enabled
[20345.869589] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800cd8c4c00
[20345.875150] radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x00000000c0056038 and cpu addr 0xffffc90001416038
[20345.882813] sd 0:0:0:0: [sda] Starting disk
[20345.907289] [drm] ring test on 0 succeeded in 1 usecs
[20346.081929] [drm] ring test on 5 succeeded in 1 usecs
[20346.081933] [drm] UVD initialized successfully.
[20346.081958] [drm] ib test on ring 0 succeeded in 0 usecs
[20346.083850] r8169 0000:05:00.0 enp5s0: link down
[20346.121074] rtc_cmos 00:01: System wakeup disabled by ACPI
[20346.121102] i8042 kbd 00:02: System wakeup disabled by ACPI
[20346.140769] usb 1-3: reset high-speed USB device number 2 using ehci-pci
[20346.372801] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[20346.391414] ata2.00: configured for UDMA/100
[20346.728838] [drm] ib test on ring 5 succeeded
[20346.877238] psmouse serio1: synaptics: queried max coordinates: x [..5728], y [..4828]
[20348.164916] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[20348.199845] ata1.00: configured for UDMA/100
[20352.088794] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[20352.091559] [drm] PCIE GART of 512M enabled (table at 0x0000000000274000).
[20352.091652] radeon 0000:02:00.0: WB enabled
[20352.091656] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800ccc27c00
[20352.091658] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800ccc27c0c
[20352.093203] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90000c32118
[20352.109636] [drm] ring test on 0 succeeded in 2 usecs
[20352.109648] [drm] ring test on 3 succeeded in 7 usecs
[20352.286045] [drm] ring test on 5 succeeded in 1 usecs
[20352.286055] [drm] UVD initialized successfully.
[20352.286150] [drm] ib test on ring 0 succeeded in 0 usecs
[20352.286234] [drm] ib test on ring 3 succeeded in 0 usecs
[20352.933331] [drm] ib test on ring 5 succeeded
[20353.333568] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[20353.333574] ACPI Error: Method parse/execution failed [\_SB.WMID.HWMC] (Node ffff88011b4c00c8), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[20353.333581] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff88011b4c02d0), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[20353.333613] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[20353.333616] ACPI Error: Method parse/execution failed [\_SB.WMID.HWMC] (Node ffff88011b4c00c8), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[20353.333622] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff88011b4c02d0), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[20353.333634] PM: resume of devices complete after 7471.438 msecs
[20353.333956] PM: Finishing wakeup.
[20353.333957] Restarting tasks ... done.
[20353.359991] video LNXVIDEO:00: Restoring backlight state
[20353.362697] video LNXVIDEO:02: Restoring backlight state
[20353.871397] IPv6: ADDRCONF(NETDEV_UP): wlp4s0b1: link is not ready
[20353.947686] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[20353.947701] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[20353.947858] IPv6: ADDRCONF(NETDEV_UP): wlp4s0b1: link is not ready
[20353.950100] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[20354.136126] r8169 0000:05:00.0 enp5s0: link down
[20354.136587] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[20354.195511] IPv6: ADDRCONF(NETDEV_UP): wlp4s0b1: link is not ready
[20354.853906] wlp4s0b1: authenticate with 30:7e:cb:65:89:74
[20354.854019] wlp4s0b1: send auth to 30:7e:cb:65:89:74 (try 1/3)
[20354.856064] wlp4s0b1: authenticated
[20354.856298] brcmsmac bcma0:1 wlp4s0b1: disabling HT/VHT due to WEP/TKIP use
[20354.857528] wlp4s0b1: associate with 30:7e:cb:65:89:74 (try 1/3)
[20354.860969] wlp4s0b1: RX AssocResp from 30:7e:cb:65:89:74 (capab=0x411 status=0 aid=3)
[20354.861514] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[20354.861520] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[20354.861536] wlp4s0b1: associated
[20354.861790] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0b1: link becomes ready
[20354.936281] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[26336.665107] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 168/256 dur 1850/1504
[26891.417262] usb 1-1: new high-speed USB device number 4 using ehci-pci
[26891.558451] usb 1-1: New USB device found, idVendor=05e3, idProduct=0727
[26891.558465] usb 1-1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[26891.558469] usb 1-1: Product: USB Storage
[26891.558472] usb 1-1: Manufacturer: Generic
[26891.558475] usb 1-1: SerialNumber: 000000000207
[26891.559396] usb-storage 1-1:1.0: USB Mass Storage device detected
[26891.572100] scsi host3: usb-storage 1-1:1.0
[26892.570862] scsi 3:0:0:0: Direct-Access Generic STORAGE DEVICE 0207 PQ: 0 ANSI: 0
[26892.573915] sd 3:0:0:0: Attached scsi generic sg2 type 0
[26892.732936] sd 3:0:0:0: [sdb] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[26892.735411] sd 3:0:0:0: [sdb] Write Protect is off
[26892.735442] sd 3:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[26892.736779] sd 3:0:0:0: [sdb] No Caching mode page found
[26892.736791] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[26892.758882] sdb: sdb1
[26892.766177] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[26893.306502] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[27002.514644] usb 1-1: USB disconnect, device number 4
[27007.187897] usb 1-1: new high-speed USB device number 5 using ehci-pci
[27007.329545] usb 1-1: New USB device found, idVendor=05e3, idProduct=0727
[27007.329562] usb 1-1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[27007.329569] usb 1-1: Product: USB Storage
[27007.329575] usb 1-1: Manufacturer: Generic
[27007.329581] usb 1-1: SerialNumber: 000000000207
[27007.334358] usb-storage 1-1:1.0: USB Mass Storage device detected
[27007.340198] scsi host4: usb-storage 1-1:1.0
[27008.345689] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 0207 PQ: 0 ANSI: 0
[27008.356112] sd 4:0:0:0: Attached scsi generic sg2 type 0
[27008.508532] sd 4:0:0:0: [sdb] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[27008.509879] sd 4:0:0:0: [sdb] Write Protect is off
[27008.509889] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[27008.511267] sd 4:0:0:0: [sdb] No Caching mode page found
[27008.511278] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[27008.534442] sdb: sdb1
[27008.543909] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[27008.982272] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[27090.080723] usb 1-1: USB disconnect, device number 5
[27094.746263] usb 1-1: new high-speed USB device number 6 using ehci-pci
[27094.891208] usb 1-1: New USB device found, idVendor=05e3, idProduct=0727
[27094.891226] usb 1-1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[27094.891234] usb 1-1: Product: USB Storage
[27094.891241] usb 1-1: Manufacturer: Generic
[27094.891246] usb 1-1: SerialNumber: 000000000207
[27094.893766] usb-storage 1-1:1.0: USB Mass Storage device detected
[27094.903719] scsi host5: usb-storage 1-1:1.0
[27095.907644] scsi 5:0:0:0: Direct-Access Generic STORAGE DEVICE 0207 PQ: 0 ANSI: 0
[27095.914666] sd 5:0:0:0: Attached scsi generic sg2 type 0
[27096.069845] sd 5:0:0:0: [sdb] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[27096.072225] sd 5:0:0:0: [sdb] Write Protect is off
[27096.072240] sd 5:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[27096.073564] sd 5:0:0:0: [sdb] No Caching mode page found
[27096.073573] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[27096.093651] sdb: sdb1
[27096.101602] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[27096.528679] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[28303.110288] usb 1-1: USB disconnect, device number 6
[28303.116299] sd 5:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[28303.116309] sd 5:0:0:0: [sdb] tag#0 CDB: Write(10) 2a 00 00 00 08 01 00 00 01 00
[28303.116312] blk_update_request: I/O error, dev sdb, sector 2049
[28303.116319] Buffer I/O error on dev sdb1, logical block 1, lost async page write
[28303.116351] sd 5:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[28303.116355] sd 5:0:0:0: [sdb] tag#0 CDB: Write(10) 2a 00 00 00 43 91 00 00 01 00
[28303.116357] blk_update_request: I/O error, dev sdb, sector 17297
[28303.116360] Buffer I/O error on dev sdb1, logical block 15249, lost async page write
[28303.118053] FAT-fs (sdb1): unable to read inode block for updating (i_pos 249112)
[28303.118092] FAT-fs (sdb1): unable to read inode block for updating (i_pos 249115)
[28303.118108] FAT-fs (sdb1): FAT read failed (blocknr 410)
[28303.118119] FAT-fs (sdb1): unable to read inode block for updating (i_pos 249119)
[28303.118133] FAT-fs (sdb1): FAT read failed (blocknr 410)
[28303.118228] FAT-fs (sdb1): unable to read inode block for updating (i_pos 249131)
[28303.118256] FAT-fs (sdb1): unable to read inode block for updating (i_pos 249134)
[28303.118276] FAT-fs (sdb1): FAT read failed (blocknr 560)
[28303.118357] FAT-fs (sdb1): unable to read inode block for updating (i_pos 249141)
[28303.118383] FAT-fs (sdb1): unable to read inode block for updating (i_pos 249144)
[28303.118418] FAT-fs (sdb1): unable to read inode block for updating (i_pos 249147)
[28303.118456] FAT-fs (sdb1): FAT read failed (blocknr 560)
[28306.096451] usb 1-1: new high-speed USB device number 7 using ehci-pci
[28306.233448] usb 1-1: New USB device found, idVendor=05e3, idProduct=0727
[28306.233477] usb 1-1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[28306.233485] usb 1-1: Product: USB Storage
[28306.233491] usb 1-1: Manufacturer: Generic
[28306.233496] usb 1-1: SerialNumber: 000000000207
[28306.235290] usb-storage 1-1:1.0: USB Mass Storage device detected
[28306.239519] scsi host6: usb-storage 1-1:1.0
[28307.238775] scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 0207 PQ: 0 ANSI: 0
[28307.244609] sd 6:0:0:0: Attached scsi generic sg2 type 0
[28307.403139] sd 6:0:0:0: [sdc] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[28307.404435] sd 6:0:0:0: [sdc] Write Protect is off
[28307.404439] sd 6:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[28307.405913] sd 6:0:0:0: [sdc] No Caching mode page found
[28307.405922] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[28307.426118] sdc: sdc1
[28307.432595] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[28307.830128] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[28309.448963] usb 1-1: USB disconnect, device number 7
[28309.449761] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[28309.449772] sd 6:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 00 1d 22 00 00 f0 00
[28309.449777] blk_update_request: I/O error, dev sdc, sector 7458
[28309.450090] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[28309.450094] sd 6:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 00 1e 12 00 00 0e 00
[28309.450096] blk_update_request: I/O error, dev sdc, sector 7698
[28309.450217] FAT-fs (sdc1): FAT read failed (blocknr 5410)
[28316.880611] usb 1-1: new high-speed USB device number 8 using ehci-pci
[28317.018296] usb 1-1: New USB device found, idVendor=05e3, idProduct=0727
[28317.018313] usb 1-1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[28317.018322] usb 1-1: Product: USB Storage
[28317.018328] usb 1-1: Manufacturer: Generic
[28317.018334] usb 1-1: SerialNumber: 000000000207
[28317.020107] usb-storage 1-1:1.0: USB Mass Storage device detected
[28317.027599] scsi host7: usb-storage 1-1:1.0
[28318.029236] scsi 7:0:0:0: Direct-Access Generic STORAGE DEVICE 0207 PQ: 0 ANSI: 0
[28318.041318] sd 7:0:0:0: Attached scsi generic sg2 type 0
[28318.192213] sd 7:0:0:0: [sdc] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[28318.196663] sd 7:0:0:0: [sdc] Write Protect is off
[28318.196686] sd 7:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[28318.198905] sd 7:0:0:0: [sdc] No Caching mode page found
[28318.198931] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[28318.226247] sdc: sdc1
[28318.230837] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[28318.713169] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[28335.225285] Buffer I/O error on dev sdb, logical block 2178, async page read
[28335.225560] Buffer I/O error on dev sdb, logical block 2178, async page read
[28338.769147] Buffer I/O error on dev sdb, logical block 2186, async page read
[28341.968898] Buffer I/O error on dev sdb, logical block 2194, async page read
[28343.376761] usb 1-1: USB disconnect, device number 8
[28344.254893] Buffer I/O error on dev sdb, logical block 2274, async page read
[28347.849202] Buffer I/O error on dev sdb, logical block 2178, async page read
[28360.222586] Buffer I/O error on dev sdb, logical block 2482, async page read
[28392.539857] Buffer I/O error on dev sdb, logical block 1211, async page read
[28392.539898] ------------[ cut here ]------------
[28392.539907] WARNING: CPU: 1 PID: 10924 at /build/linux-kOWph6/linux-4.4.0/fs/fs-writeback.c:2113 __mark_inode_dirty+0x293/0x380()
[28392.539910] bdi-block not registered
[28392.539912] Modules linked in: nls_iso8859_1 uas usb_storage arc4 brcmsmac cordic brcmutil b43 uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common mac80211 cfg80211 ssb videodev media kvm hp_wmi sparse_keymap joydev irqbypass snd_hda_codec_idt snd_hda_codec_generic input_leds serio_raw snd_seq_midi snd_seq_midi_event snd_rawmidi edac_mce_amd k10temp snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hda_core snd_seq edac_core snd_hwdep snd_seq_device snd_pcm i2c_piix4 snd_timer rtsx_pci_ms bcma snd memstick soundcore mac_hid shpchp binfmt_misc parport_pc ppdev lp parport autofs4 hid_generic usbhid hid rtsx_pci_sdmmc amdkfd amd_iommu_v2 radeon psmouse i2c_algo_bit ahci ttm libahci rtsx_pci r8169 drm_kms_helper mii syscopyarea sysfillrect sysimgblt fb_sys_fops drm
[28392.539978] wmi fjes video
[28392.539984] CPU: 1 PID: 10924 Comm: testdisk Not tainted 4.4.0-45-generic #66-Ubuntu
[28392.539987] Hardware name: Hewlett-Packard HP Pavilion g7 Notebook PC/1665, BIOS F.02 02/16/2011
[28392.539990] 0000000000000286 000000007ab37858 ffff8800cdd2bc40 ffffffff813f1fe3
[28392.539994] ffff8800cdd2bc88 ffffffff81cd9728 ffff8800cdd2bc78 ffffffff81081212
[28392.539997] 0000000000000000 ffff8800c16a6e40 ffff8800c1cdd948 ffff8800c1cdd9d0
[28392.540000] Call Trace:
[28392.540008] [<ffffffff813f1fe3>] dump_stack+0x63/0x90
[28392.540013] [<ffffffff81081212>] warn_slowpath_common+0x82/0xc0
[28392.540016] [<ffffffff810812ac>] warn_slowpath_fmt+0x5c/0x80
[28392.540020] [<ffffffff8123b613>] ? locked_inode_to_wb_and_lock_list+0x53/0x100
[28392.540023] [<ffffffff8123c0c3>] __mark_inode_dirty+0x293/0x380
[28392.540027] [<ffffffff81228709>] generic_update_time+0x79/0xd0
[28392.540030] [<ffffffff8122889d>] file_update_time+0xbd/0x110
[28392.540034] [<ffffffff8118fc2d>] __generic_file_write_iter+0x9d/0x1e0
[28392.540037] [<ffffffff8118fe55>] generic_file_write_iter+0xe5/0x1e0
[28392.540041] [<ffffffff8120cf5b>] new_sync_write+0x9b/0xe0
[28392.540045] [<ffffffff8120cfc6>] __vfs_write+0x26/0x40
[28392.540048] [<ffffffff8120d949>] vfs_write+0xa9/0x1a0
[28392.540051] [<ffffffff8120d7f6>] ? vfs_read+0x86/0x130
[28392.540054] [<ffffffff8120e605>] SyS_write+0x55/0xc0
[28392.540058] [<ffffffff818318b2>] entry_SYSCALL_64_fastpath+0x16/0x71
[28392.540061] ---[ end trace 97a3bb9b5c8c4804 ]---
[28486.378460] Buffer I/O error on dev sdb, logical block 256, async page read
[28486.378509] Buffer I/O error on dev sdb, logical block 256, async page read
[28514.395145] Buffer I/O error on dev sdb, logical block 7791728, async page read
[28514.395170] Buffer I/O error on dev sdb, logical block 7791742, async page read
[28514.395184] Buffer I/O error on dev sdb, logical block 0, async page read
[28514.395196] Buffer I/O error on dev sdb, logical block 2, async page read
[28514.395203] Buffer I/O error on dev sdb, logical block 7, async page read
[28514.395209] Buffer I/O error on dev sdb, logical block 15, async page read
[28514.395220] Buffer I/O error on dev sdb, logical block 7791743, async page read
[28514.395226] Buffer I/O error on dev sdb, logical block 6144, async page read
[28514.395234] Buffer I/O error on dev sdb, logical block 24576, async page read
[28514.395241] Buffer I/O error on dev sdb, logical block 98304, async page read
[28535.056927] FAT-fs (sdb1): unable to read inode block for updating (i_pos 243994)
[28762.405892] FAT-fs (sdb1): Directory bread(block 15248) failed
[28762.405902] FAT-fs (sdb1): Directory bread(block 15249) failed
[28762.405906] FAT-fs (sdb1): Directory bread(block 15250) failed
[28762.405909] FAT-fs (sdb1): Directory bread(block 15251) failed
[28762.405912] FAT-fs (sdb1): Directory bread(block 15252) failed
[28762.405914] FAT-fs (sdb1): Directory bread(block 15253) failed
[28762.405917] FAT-fs (sdb1): Directory bread(block 15254) failed
[28762.405920] FAT-fs (sdb1): Directory bread(block 15255) failed
[28762.405923] FAT-fs (sdb1): Directory bread(block 15256) failed
[28762.405926] FAT-fs (sdb1): Directory bread(block 15257) failed
[28770.791616] fat__get_entry: 758 callbacks suppressed
[28770.791624] FAT-fs (sdb1): Directory bread(block 15248) failed
[28770.791629] FAT-fs (sdb1): Directory bread(block 15249) failed
[28770.791632] FAT-fs (sdb1): Directory bread(block 15250) failed
[28770.791635] FAT-fs (sdb1): Directory bread(block 15251) failed
[28770.791638] FAT-fs (sdb1): Directory bread(block 15252) failed
[28770.791640] FAT-fs (sdb1): Directory bread(block 15253) failed
[28770.791643] FAT-fs (sdb1): Directory bread(block 15254) failed
[28770.791646] FAT-fs (sdb1): Directory bread(block 15255) failed
[28770.791648] FAT-fs (sdb1): Directory bread(block 15256) failed
[28770.791651] FAT-fs (sdb1): Directory bread(block 15257) failed
[28918.960203] fat__get_entry: 54 callbacks suppressed
[28918.960210] FAT-fs (sdb1): Directory bread(block 15248) failed
[28918.960214] FAT-fs (sdb1): Directory bread(block 15249) failed
[28918.960216] FAT-fs (sdb1): Directory bread(block 15250) failed
[28918.960218] FAT-fs (sdb1): Directory bread(block 15251) failed
[28918.960220] FAT-fs (sdb1): Directory bread(block 15252) failed
[28918.960222] FAT-fs (sdb1): Directory bread(block 15253) failed
[28918.960225] FAT-fs (sdb1): Directory bread(block 15254) failed
[28918.960227] FAT-fs (sdb1): Directory bread(block 15255) failed
[28918.960229] FAT-fs (sdb1): Directory bread(block 15256) failed
[28918.960231] FAT-fs (sdb1): Directory bread(block 15257) failed
[28966.678348] fat__get_entry: 54 callbacks suppressed
[28966.678354] FAT-fs (sdb1): Directory bread(block 15248) failed
[28966.678358] FAT-fs (sdb1): Directory bread(block 15249) failed
[28966.678360] FAT-fs (sdb1): Directory bread(block 15250) failed
[28966.678362] FAT-fs (sdb1): Directory bread(block 15251) failed
[28966.678364] FAT-fs (sdb1): Directory bread(block 15252) failed
[28966.678367] FAT-fs (sdb1): Directory bread(block 15253) failed
[28966.678369] FAT-fs (sdb1): Directory bread(block 15254) failed
[28966.678371] FAT-fs (sdb1): Directory bread(block 15255) failed
[28966.678373] FAT-fs (sdb1): Directory bread(block 15256) failed
[28966.678375] FAT-fs (sdb1): Directory bread(block 15257) failed
[29111.598474] fat__get_entry: 1910 callbacks suppressed
[29111.598484] FAT-fs (sdb1): Directory bread(block 15248) failed
[29111.598488] FAT-fs (sdb1): Directory bread(block 15249) failed
[29111.598491] FAT-fs (sdb1): Directory bread(block 15250) failed
[29111.598493] FAT-fs (sdb1): Directory bread(block 15251) failed
[29111.598495] FAT-fs (sdb1): Directory bread(block 15252) failed
[29111.598497] FAT-fs (sdb1): Directory bread(block 15253) failed
[29111.598499] FAT-fs (sdb1): Directory bread(block 15254) failed
[29111.598501] FAT-fs (sdb1): Directory bread(block 15255) failed
[29111.598503] FAT-fs (sdb1): Directory bread(block 15256) failed
[29111.598505] FAT-fs (sdb1): Directory bread(block 15257) failed
[30768.947312] fat__get_entry: 54 callbacks suppressed
[30768.947320] FAT-fs (sdb1): Directory bread(block 15248) failed
[30768.947325] FAT-fs (sdb1): Directory bread(block 15249) failed
[30768.947328] FAT-fs (sdb1): Directory bread(block 15250) failed
[30768.947331] FAT-fs (sdb1): Directory bread(block 15251) failed
[30768.947334] FAT-fs (sdb1): Directory bread(block 15252) failed
[30768.947337] FAT-fs (sdb1): Directory bread(block 15253) failed
[30768.947340] FAT-fs (sdb1): Directory bread(block 15254) failed
[30768.947342] FAT-fs (sdb1): Directory bread(block 15255) failed
[30768.947345] FAT-fs (sdb1): Directory bread(block 15256) failed
[30768.947348] FAT-fs (sdb1): Directory bread(block 15257) failed
[30770.381967] FAT-fs (sdb1): bread failed in fat_clusters_flushCommande lsusb:
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0c45:6321 Microdia
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubCommande effectuée 2sec après avoir connecté ma microSD (dmesg | tail -n 30):
[28966.678362] FAT-fs (sdb1): Directory bread(block 15251) failed
[28966.678364] FAT-fs (sdb1): Directory bread(block 15252) failed
[28966.678367] FAT-fs (sdb1): Directory bread(block 15253) failed
[28966.678369] FAT-fs (sdb1): Directory bread(block 15254) failed
[28966.678371] FAT-fs (sdb1): Directory bread(block 15255) failed
[28966.678373] FAT-fs (sdb1): Directory bread(block 15256) failed
[28966.678375] FAT-fs (sdb1): Directory bread(block 15257) failed
[29111.598474] fat__get_entry: 1910 callbacks suppressed
[29111.598484] FAT-fs (sdb1): Directory bread(block 15248) failed
[29111.598488] FAT-fs (sdb1): Directory bread(block 15249) failed
[29111.598491] FAT-fs (sdb1): Directory bread(block 15250) failed
[29111.598493] FAT-fs (sdb1): Directory bread(block 15251) failed
[29111.598495] FAT-fs (sdb1): Directory bread(block 15252) failed
[29111.598497] FAT-fs (sdb1): Directory bread(block 15253) failed
[29111.598499] FAT-fs (sdb1): Directory bread(block 15254) failed
[29111.598501] FAT-fs (sdb1): Directory bread(block 15255) failed
[29111.598503] FAT-fs (sdb1): Directory bread(block 15256) failed
[29111.598505] FAT-fs (sdb1): Directory bread(block 15257) failed
[30768.947312] fat__get_entry: 54 callbacks suppressed
[30768.947320] FAT-fs (sdb1): Directory bread(block 15248) failed
[30768.947325] FAT-fs (sdb1): Directory bread(block 15249) failed
[30768.947328] FAT-fs (sdb1): Directory bread(block 15250) failed
[30768.947331] FAT-fs (sdb1): Directory bread(block 15251) failed
[30768.947334] FAT-fs (sdb1): Directory bread(block 15252) failed
[30768.947337] FAT-fs (sdb1): Directory bread(block 15253) failed
[30768.947340] FAT-fs (sdb1): Directory bread(block 15254) failed
[30768.947342] FAT-fs (sdb1): Directory bread(block 15255) failed
[30768.947345] FAT-fs (sdb1): Directory bread(block 15256) failed
[30768.947348] FAT-fs (sdb1): Directory bread(block 15257) failed
[30770.381967] FAT-fs (sdb1): bread failed in fat_clusters_flushMerci pour votre aide
Dernière modification par M4gie (Le 01/11/2016, à 13:45)
Hors ligne
#2 Le 01/11/2016, à 13:46
- Bougron
Re : Carte MicroSD non détectée
Bonjour
Je ne pense pas que testdisk soit l'outil normal à utiliser pour formater un périphérique. L'application GPARTED est dédiée à cette action.
Mais pour formater, il faut savoir le type de partition qu'on veut créer . Cela est fonction des besoins. Je vais te proposer d'utiliser le format FAT32 sans savoir si c'est celui qui convient pour un androïd.
AJOUT
Je pense qu'avec testdisk tu as seulement indiqué un type de partition et pas du tout créé la structure gérant les données à stocker dans cette partition. C'est que qui est actuellement recherché par la trace.
Dernière modification par Bougron (Le 01/11/2016, à 13:52)
Hors ligne
#3 Le 01/11/2016, à 13:48
- M4gie
Re : Carte MicroSD non détectée
Le soucis c'est que maintenant GPARTED ne détecte plus ma microSD
Hors ligne
#4 Le 01/11/2016, à 13:54
- Bougron
Re : Carte MicroSD non détectée
Il faut fabriquer une table de partition MSDSOS (99% de chances qu'elle convienne pour android) avec l'onglet périphérique.
Je viens de voir plus en détail la trace
[27096.528679] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.Peux faire les deux commandes
sudo blkid | grep sdb
sudo fdisk -l | grep sdbsi SDB est toujours visible, elle est obligatoirement visible dans GPARTED mais il faut cliquer sur le mot gparted puis sur pếriphérique
Ajout; L'idée de la commande dmesg est bonne . Autant faire seulement la fin avec la commande suivante
dmesg | tail -100Dernière modification par Bougron (Le 01/11/2016, à 14:07)
Hors ligne
#5 Le 01/11/2016, à 13:58
- M4gie
Re : Carte MicroSD non détectée
Je sélectionne Périphérique, puis créer une table de partition et là j'ai sa : 2 partitions sont actuellement actives sur le périphérique /dev/sda
dmesg | tail -100:
[28392.539987] Hardware name: Hewlett-Packard HP Pavilion g7 Notebook PC/1665, BIOS F.02 02/16/2011
[28392.539990] 0000000000000286 000000007ab37858 ffff8800cdd2bc40 ffffffff813f1fe3
[28392.539994] ffff8800cdd2bc88 ffffffff81cd9728 ffff8800cdd2bc78 ffffffff81081212
[28392.539997] 0000000000000000 ffff8800c16a6e40 ffff8800c1cdd948 ffff8800c1cdd9d0
[28392.540000] Call Trace:
[28392.540008] [<ffffffff813f1fe3>] dump_stack+0x63/0x90
[28392.540013] [<ffffffff81081212>] warn_slowpath_common+0x82/0xc0
[28392.540016] [<ffffffff810812ac>] warn_slowpath_fmt+0x5c/0x80
[28392.540020] [<ffffffff8123b613>] ? locked_inode_to_wb_and_lock_list+0x53/0x100
[28392.540023] [<ffffffff8123c0c3>] __mark_inode_dirty+0x293/0x380
[28392.540027] [<ffffffff81228709>] generic_update_time+0x79/0xd0
[28392.540030] [<ffffffff8122889d>] file_update_time+0xbd/0x110
[28392.540034] [<ffffffff8118fc2d>] __generic_file_write_iter+0x9d/0x1e0
[28392.540037] [<ffffffff8118fe55>] generic_file_write_iter+0xe5/0x1e0
[28392.540041] [<ffffffff8120cf5b>] new_sync_write+0x9b/0xe0
[28392.540045] [<ffffffff8120cfc6>] __vfs_write+0x26/0x40
[28392.540048] [<ffffffff8120d949>] vfs_write+0xa9/0x1a0
[28392.540051] [<ffffffff8120d7f6>] ? vfs_read+0x86/0x130
[28392.540054] [<ffffffff8120e605>] SyS_write+0x55/0xc0
[28392.540058] [<ffffffff818318b2>] entry_SYSCALL_64_fastpath+0x16/0x71
[28392.540061] ---[ end trace 97a3bb9b5c8c4804 ]---
[28486.378460] Buffer I/O error on dev sdb, logical block 256, async page read
[28486.378509] Buffer I/O error on dev sdb, logical block 256, async page read
[28514.395145] Buffer I/O error on dev sdb, logical block 7791728, async page read
[28514.395170] Buffer I/O error on dev sdb, logical block 7791742, async page read
[28514.395184] Buffer I/O error on dev sdb, logical block 0, async page read
[28514.395196] Buffer I/O error on dev sdb, logical block 2, async page read
[28514.395203] Buffer I/O error on dev sdb, logical block 7, async page read
[28514.395209] Buffer I/O error on dev sdb, logical block 15, async page read
[28514.395220] Buffer I/O error on dev sdb, logical block 7791743, async page read
[28514.395226] Buffer I/O error on dev sdb, logical block 6144, async page read
[28514.395234] Buffer I/O error on dev sdb, logical block 24576, async page read
[28514.395241] Buffer I/O error on dev sdb, logical block 98304, async page read
[28535.056927] FAT-fs (sdb1): unable to read inode block for updating (i_pos 243994)
[28762.405892] FAT-fs (sdb1): Directory bread(block 15248) failed
[28762.405902] FAT-fs (sdb1): Directory bread(block 15249) failed
[28762.405906] FAT-fs (sdb1): Directory bread(block 15250) failed
[28762.405909] FAT-fs (sdb1): Directory bread(block 15251) failed
[28762.405912] FAT-fs (sdb1): Directory bread(block 15252) failed
[28762.405914] FAT-fs (sdb1): Directory bread(block 15253) failed
[28762.405917] FAT-fs (sdb1): Directory bread(block 15254) failed
[28762.405920] FAT-fs (sdb1): Directory bread(block 15255) failed
[28762.405923] FAT-fs (sdb1): Directory bread(block 15256) failed
[28762.405926] FAT-fs (sdb1): Directory bread(block 15257) failed
[28770.791616] fat__get_entry: 758 callbacks suppressed
[28770.791624] FAT-fs (sdb1): Directory bread(block 15248) failed
[28770.791629] FAT-fs (sdb1): Directory bread(block 15249) failed
[28770.791632] FAT-fs (sdb1): Directory bread(block 15250) failed
[28770.791635] FAT-fs (sdb1): Directory bread(block 15251) failed
[28770.791638] FAT-fs (sdb1): Directory bread(block 15252) failed
[28770.791640] FAT-fs (sdb1): Directory bread(block 15253) failed
[28770.791643] FAT-fs (sdb1): Directory bread(block 15254) failed
[28770.791646] FAT-fs (sdb1): Directory bread(block 15255) failed
[28770.791648] FAT-fs (sdb1): Directory bread(block 15256) failed
[28770.791651] FAT-fs (sdb1): Directory bread(block 15257) failed
[28918.960203] fat__get_entry: 54 callbacks suppressed
[28918.960210] FAT-fs (sdb1): Directory bread(block 15248) failed
[28918.960214] FAT-fs (sdb1): Directory bread(block 15249) failed
[28918.960216] FAT-fs (sdb1): Directory bread(block 15250) failed
[28918.960218] FAT-fs (sdb1): Directory bread(block 15251) failed
[28918.960220] FAT-fs (sdb1): Directory bread(block 15252) failed
[28918.960222] FAT-fs (sdb1): Directory bread(block 15253) failed
[28918.960225] FAT-fs (sdb1): Directory bread(block 15254) failed
[28918.960227] FAT-fs (sdb1): Directory bread(block 15255) failed
[28918.960229] FAT-fs (sdb1): Directory bread(block 15256) failed
[28918.960231] FAT-fs (sdb1): Directory bread(block 15257) failed
[28966.678348] fat__get_entry: 54 callbacks suppressed
[28966.678354] FAT-fs (sdb1): Directory bread(block 15248) failed
[28966.678358] FAT-fs (sdb1): Directory bread(block 15249) failed
[28966.678360] FAT-fs (sdb1): Directory bread(block 15250) failed
[28966.678362] FAT-fs (sdb1): Directory bread(block 15251) failed
[28966.678364] FAT-fs (sdb1): Directory bread(block 15252) failed
[28966.678367] FAT-fs (sdb1): Directory bread(block 15253) failed
[28966.678369] FAT-fs (sdb1): Directory bread(block 15254) failed
[28966.678371] FAT-fs (sdb1): Directory bread(block 15255) failed
[28966.678373] FAT-fs (sdb1): Directory bread(block 15256) failed
[28966.678375] FAT-fs (sdb1): Directory bread(block 15257) failed
[29111.598474] fat__get_entry: 1910 callbacks suppressed
[29111.598484] FAT-fs (sdb1): Directory bread(block 15248) failed
[29111.598488] FAT-fs (sdb1): Directory bread(block 15249) failed
[29111.598491] FAT-fs (sdb1): Directory bread(block 15250) failed
[29111.598493] FAT-fs (sdb1): Directory bread(block 15251) failed
[29111.598495] FAT-fs (sdb1): Directory bread(block 15252) failed
[29111.598497] FAT-fs (sdb1): Directory bread(block 15253) failed
[29111.598499] FAT-fs (sdb1): Directory bread(block 15254) failed
[29111.598501] FAT-fs (sdb1): Directory bread(block 15255) failed
[29111.598503] FAT-fs (sdb1): Directory bread(block 15256) failed
[29111.598505] FAT-fs (sdb1): Directory bread(block 15257) failed
[30768.947312] fat__get_entry: 54 callbacks suppressed
[30768.947320] FAT-fs (sdb1): Directory bread(block 15248) failed
[30768.947325] FAT-fs (sdb1): Directory bread(block 15249) failed
[30768.947328] FAT-fs (sdb1): Directory bread(block 15250) failed
[30768.947331] FAT-fs (sdb1): Directory bread(block 15251) failed
[30768.947334] FAT-fs (sdb1): Directory bread(block 15252) failed
[30768.947337] FAT-fs (sdb1): Directory bread(block 15253) failed
[30768.947340] FAT-fs (sdb1): Directory bread(block 15254) failed
[30768.947342] FAT-fs (sdb1): Directory bread(block 15255) failed
[30768.947345] FAT-fs (sdb1): Directory bread(block 15256) failed
[30768.947348] FAT-fs (sdb1): Directory bread(block 15257) failed
[30770.381967] FAT-fs (sdb1): bread failed in fat_clusters_flushDernière modification par M4gie (Le 01/11/2016, à 14:08)
Hors ligne
#6 Le 01/11/2016, à 14:08
- Bougron
Re : Carte MicroSD non détectée
Peux faire les deux commandes
sudo blkid | grep sdb
sudo fdisk -l | grep sdbsi SDB est toujours visible, elle est obligatoirement visible dans GPARTED mais il faut cliquer sur le mot gparted puis sur pếriphérique
Je suis en train de lire cela https://www.tablette-chinoise.net/les-p … ut-savoir/ sans savoir si c'est utile
====>
/sdcard
Ce n’est pas une partition de la mémoire interne de l’appareil mais de la carte SD. En d’autres termes, c’est un espace de stockage libre que vous pouvez utiliser pour vos fichiers média, documents, fichiers .zip…. Le fait d’effacer cette partition ne risque rien à partir du moment où vous avez préalablement sauvegardé ces données sur une carte SD externe ou sur un PC par exemple.
Des applications viennent stocker des données et des paramètres dans /sdcard pour info.
Sur les appareils ayant une carte SD interne et externe, la partition /sdcard est toujours utilisée comme référence à la carte SD interne. Pour la carte SD externe, une autre partition existe et elle diffère selon les appareils et les versions Android.
Contrairement à /sdcard, on ne retrouve aucune donnée système ou d’application dans la carte SD externe (par défaut), vous pouvez donc l’effacer sans problème après avoir sauvegardé vos propres données personnelles bien sûr.
/sd-ext
Ceci n’est pas une partition Android standard mais elle est devenue populaire via les ROMs Custom. C’est globablement une partition additionnelle sur votre carte SD qui fonctionne comme la partition /data lors-qu’utilisée par certaines ROMs ayant des fonctionnalités particulières comme App2SD ou Mount2SD activées. Elle est particulièrement utile sur les appareils dôtés d’une petite mémoire interne allouée à la partition /data.
Par conséquent, les utilisateurs – qui veulent installer plus de programmes que la mémoire interne ne le permet – peuvent utiliser cette partition /sd-ext avec leur ROM Custom (qui doit être compatible) pour avoir un espace de stockage complémentaire.
Le fait de supprimer cette partition aura les mêmes effets que /data, vous perdrez donc contacts, messages, applications téléchargées et paramètres.
Dernière modification par Bougron (Le 01/11/2016, à 14:23)
Hors ligne
#7 Le 01/11/2016, à 14:10
- M4gie
Re : Carte MicroSD non détectée
Bougron a écrit :
Peux faire les deux commandes
sudo blkid | grep sdb sudo fdisk -l | grep sdbsi SDB est toujours visible, elle est obligatoirement visible dans GPARTED mais il faut cliquer sur le mot gparted puis sur pếriphérique
Les deux commandes ne m'affichent rien
Hors ligne
#8 Le 01/11/2016, à 14:19
- Bougron
Re : Carte MicroSD non détectée
Débranches la cartes SD, rebranches la carte puis
dmesg | tail -100 | grep sdb
sudo blkid | grep sdb
sudo fdisk -l | grep sdbHors ligne
#9 Le 01/11/2016, à 14:23
- M4gie
Re : Carte MicroSD non détectée
dmesg | tail -100 | grep sdb
[28486.378460] Buffer I/O error on dev sdb, logical block 256, async page read
[28486.378509] Buffer I/O error on dev sdb, logical block 256, async page read
[28514.395145] Buffer I/O error on dev sdb, logical block 7791728, async page read
[28514.395170] Buffer I/O error on dev sdb, logical block 7791742, async page read
[28514.395184] Buffer I/O error on dev sdb, logical block 0, async page read
[28514.395196] Buffer I/O error on dev sdb, logical block 2, async page read
[28514.395203] Buffer I/O error on dev sdb, logical block 7, async page read
[28514.395209] Buffer I/O error on dev sdb, logical block 15, async page read
[28514.395220] Buffer I/O error on dev sdb, logical block 7791743, async page read
[28514.395226] Buffer I/O error on dev sdb, logical block 6144, async page read
[28514.395234] Buffer I/O error on dev sdb, logical block 24576, async page read
[28514.395241] Buffer I/O error on dev sdb, logical block 98304, async page read
[28535.056927] FAT-fs (sdb1): unable to read inode block for updating (i_pos 243994)
[28762.405892] FAT-fs (sdb1): Directory bread(block 15248) failed
[28762.405902] FAT-fs (sdb1): Directory bread(block 15249) failed
[28762.405906] FAT-fs (sdb1): Directory bread(block 15250) failed
[28762.405909] FAT-fs (sdb1): Directory bread(block 15251) failed
[28762.405912] FAT-fs (sdb1): Directory bread(block 15252) failed
[28762.405914] FAT-fs (sdb1): Directory bread(block 15253) failed
[28762.405917] FAT-fs (sdb1): Directory bread(block 15254) failed
[28762.405920] FAT-fs (sdb1): Directory bread(block 15255) failed
[28762.405923] FAT-fs (sdb1): Directory bread(block 15256) failed
[28762.405926] FAT-fs (sdb1): Directory bread(block 15257) failed
[28770.791624] FAT-fs (sdb1): Directory bread(block 15248) failed
[28770.791629] FAT-fs (sdb1): Directory bread(block 15249) failed
[28770.791632] FAT-fs (sdb1): Directory bread(block 15250) failed
[28770.791635] FAT-fs (sdb1): Directory bread(block 15251) failed
[28770.791638] FAT-fs (sdb1): Directory bread(block 15252) failed
[28770.791640] FAT-fs (sdb1): Directory bread(block 15253) failed
[28770.791643] FAT-fs (sdb1): Directory bread(block 15254) failed
[28770.791646] FAT-fs (sdb1): Directory bread(block 15255) failed
[28770.791648] FAT-fs (sdb1): Directory bread(block 15256) failed
[28770.791651] FAT-fs (sdb1): Directory bread(block 15257) failed
[28918.960210] FAT-fs (sdb1): Directory bread(block 15248) failed
[28918.960214] FAT-fs (sdb1): Directory bread(block 15249) failed
[28918.960216] FAT-fs (sdb1): Directory bread(block 15250) failed
[28918.960218] FAT-fs (sdb1): Directory bread(block 15251) failed
[28918.960220] FAT-fs (sdb1): Directory bread(block 15252) failed
[28918.960222] FAT-fs (sdb1): Directory bread(block 15253) failed
[28918.960225] FAT-fs (sdb1): Directory bread(block 15254) failed
[28918.960227] FAT-fs (sdb1): Directory bread(block 15255) failed
[28918.960229] FAT-fs (sdb1): Directory bread(block 15256) failed
[28918.960231] FAT-fs (sdb1): Directory bread(block 15257) failed
[28966.678354] FAT-fs (sdb1): Directory bread(block 15248) failed
[28966.678358] FAT-fs (sdb1): Directory bread(block 15249) failed
[28966.678360] FAT-fs (sdb1): Directory bread(block 15250) failed
[28966.678362] FAT-fs (sdb1): Directory bread(block 15251) failed
[28966.678364] FAT-fs (sdb1): Directory bread(block 15252) failed
[28966.678367] FAT-fs (sdb1): Directory bread(block 15253) failed
[28966.678369] FAT-fs (sdb1): Directory bread(block 15254) failed
[28966.678371] FAT-fs (sdb1): Directory bread(block 15255) failed
[28966.678373] FAT-fs (sdb1): Directory bread(block 15256) failed
[28966.678375] FAT-fs (sdb1): Directory bread(block 15257) failed
[29111.598484] FAT-fs (sdb1): Directory bread(block 15248) failed
[29111.598488] FAT-fs (sdb1): Directory bread(block 15249) failed
[29111.598491] FAT-fs (sdb1): Directory bread(block 15250) failed
[29111.598493] FAT-fs (sdb1): Directory bread(block 15251) failed
[29111.598495] FAT-fs (sdb1): Directory bread(block 15252) failed
[29111.598497] FAT-fs (sdb1): Directory bread(block 15253) failed
[29111.598499] FAT-fs (sdb1): Directory bread(block 15254) failed
[29111.598501] FAT-fs (sdb1): Directory bread(block 15255) failed
[29111.598503] FAT-fs (sdb1): Directory bread(block 15256) failed
[29111.598505] FAT-fs (sdb1): Directory bread(block 15257) failed
[30768.947320] FAT-fs (sdb1): Directory bread(block 15248) failed
[30768.947325] FAT-fs (sdb1): Directory bread(block 15249) failed
[30768.947328] FAT-fs (sdb1): Directory bread(block 15250) failed
[30768.947331] FAT-fs (sdb1): Directory bread(block 15251) failed
[30768.947334] FAT-fs (sdb1): Directory bread(block 15252) failed
[30768.947337] FAT-fs (sdb1): Directory bread(block 15253) failed
[30768.947340] FAT-fs (sdb1): Directory bread(block 15254) failed
[30768.947342] FAT-fs (sdb1): Directory bread(block 15255) failed
[30768.947345] FAT-fs (sdb1): Directory bread(block 15256) failed
[30768.947348] FAT-fs (sdb1): Directory bread(block 15257) failed
[30770.381967] FAT-fs (sdb1): bread failed in fat_clusters_flushet les deux autres n'affichent rien
Hors ligne
#10 Le 01/11/2016, à 14:30
- Bougron
Re : Carte MicroSD non détectée
Vu l'erreur: Si le montage est bon, elle peut ne pas s'appeler sdb1
sudo fdisk -l
sudo blkidHors ligne
#11 Le 01/11/2016, à 14:33
- M4gie
Re : Carte MicroSD non détectée
Bougron a écrit :
Vu l'erreur: Si le montage est bon, elle peut ne pas s'appeler sdb1
sudo fdisk -l sudo blkid
sudo fdisk -l
Disque /dev/ram0 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram1 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram2 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram3 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram4 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram5 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram6 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram7 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram8 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram9 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram10 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram11 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram12 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram13 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram14 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram15 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/sda : 465,8 GiB, 500107862016 octets, 976773168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xc98a6f34
Périphérique Amorçage Start Fin Secteurs Size Id Type
/dev/sda1 * 2048 968919039 968916992 462G 83 Linux
/dev/sda2 968921086 976771071 7849986 3,8G 5 Étendue
/dev/sda5 968921088 976771071 7849984 3,8G 82 partition d'échange Linsudo blkid
/dev/sda1: UUID="05c063a7-6f6c-4e61-90f4-01322ab1ba0c" TYPE="ext4" PARTUUID="c98a6f34-01"
/dev/sda5: UUID="f204480e-5c0a-4b3e-b1ee-4aed114d167e" TYPE="swap" PARTUUID="c98a6f34-05"Hors ligne
#12 Le 01/11/2016, à 14:43
- MicP
Re : Carte MicroSD non détectée
Bonjour
Par curiosité, ouvre une fenêtre de terminal, et entre la commande suivante :
udisksctl monitorEnsuite, connecte ta carte SD et retourne nous un copié/collé de ce qui s'est affiché.
=======
Est-ce que tu compte formater cette carte SD <=> supprimer toutes les informations qu'elle contient en recréant un système de fichiers tout neuf ?
Ou alors espère-tu récupérer les informations contenues dans ce système de fichier bancal ?
Dernière modification par MicP (Le 01/11/2016, à 14:46)
Hors ligne
#13 Le 01/11/2016, à 14:48
- M4gie
Re : Carte MicroSD non détectée
MicP a écrit :
Bonjour
Par curiosité, ouvre une fenêtre de terminal, et entre la commande suivante :
udisksctl monitorEnsuite, connecte ta carte SD et retourne nous un copié/collé de ce qui s'est affiché.
=======
Est-ce que tu compte formater cette carte SD <=> supprimer toutes les informations qu'elle contient en recréant un système de fichiers tout neuf ?
Ou alors espère-tu récupérer les informations contenues dans ce système de fichier bancal ?
J'ai rien qui ne s'affiche après avoir connecté ma carte SD et cela ne me gêne pas de perdre tout ce qui est contenu à l'intérieur de cette carte SD
Hors ligne
#14 Le 01/11/2016, à 14:52
- Bougron
Re : Carte MicroSD non détectée
On va reprendre à zero
1) Demontes la carte
2) Retour de
dmesg | tail -103) Remontes la carte attend 30 secondes
5) Retour de
dmesg | tail -60J'attends pour voir
Hors ligne
#15 Le 01/11/2016, à 15:00
- M4gie
Re : Carte MicroSD non détectée
dmesg | tail -10
[30768.947348] FAT-fs (sdb1): Directory bread(block 15257) failed
[30770.381967] FAT-fs (sdb1): bread failed in fat_clusters_flush
[36028.663546] usb 5-2: USB disconnect, device number 2
[36034.386419] usb 5-2: new low-speed USB device number 3 using ohci-pci
[36034.553595] usb 5-2: New USB device found, idVendor=046d, idProduct=c077
[36034.553608] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[36034.553616] usb 5-2: Product: USB Optical Mouse
[36034.553621] usb 5-2: Manufacturer: Logitech
[36034.563035] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/0003:046D:C077.0002/input/input14
[36034.619132] hid-generic 0003:046D:C077.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-2/input0dmesg | tail -60:
[28770.791635] FAT-fs (sdb1): Directory bread(block 15251) failed
[28770.791638] FAT-fs (sdb1): Directory bread(block 15252) failed
[28770.791640] FAT-fs (sdb1): Directory bread(block 15253) failed
[28770.791643] FAT-fs (sdb1): Directory bread(block 15254) failed
[28770.791646] FAT-fs (sdb1): Directory bread(block 15255) failed
[28770.791648] FAT-fs (sdb1): Directory bread(block 15256) failed
[28770.791651] FAT-fs (sdb1): Directory bread(block 15257) failed
[28918.960203] fat__get_entry: 54 callbacks suppressed
[28918.960210] FAT-fs (sdb1): Directory bread(block 15248) failed
[28918.960214] FAT-fs (sdb1): Directory bread(block 15249) failed
[28918.960216] FAT-fs (sdb1): Directory bread(block 15250) failed
[28918.960218] FAT-fs (sdb1): Directory bread(block 15251) failed
[28918.960220] FAT-fs (sdb1): Directory bread(block 15252) failed
[28918.960222] FAT-fs (sdb1): Directory bread(block 15253) failed
[28918.960225] FAT-fs (sdb1): Directory bread(block 15254) failed
[28918.960227] FAT-fs (sdb1): Directory bread(block 15255) failed
[28918.960229] FAT-fs (sdb1): Directory bread(block 15256) failed
[28918.960231] FAT-fs (sdb1): Directory bread(block 15257) failed
[28966.678348] fat__get_entry: 54 callbacks suppressed
[28966.678354] FAT-fs (sdb1): Directory bread(block 15248) failed
[28966.678358] FAT-fs (sdb1): Directory bread(block 15249) failed
[28966.678360] FAT-fs (sdb1): Directory bread(block 15250) failed
[28966.678362] FAT-fs (sdb1): Directory bread(block 15251) failed
[28966.678364] FAT-fs (sdb1): Directory bread(block 15252) failed
[28966.678367] FAT-fs (sdb1): Directory bread(block 15253) failed
[28966.678369] FAT-fs (sdb1): Directory bread(block 15254) failed
[28966.678371] FAT-fs (sdb1): Directory bread(block 15255) failed
[28966.678373] FAT-fs (sdb1): Directory bread(block 15256) failed
[28966.678375] FAT-fs (sdb1): Directory bread(block 15257) failed
[29111.598474] fat__get_entry: 1910 callbacks suppressed
[29111.598484] FAT-fs (sdb1): Directory bread(block 15248) failed
[29111.598488] FAT-fs (sdb1): Directory bread(block 15249) failed
[29111.598491] FAT-fs (sdb1): Directory bread(block 15250) failed
[29111.598493] FAT-fs (sdb1): Directory bread(block 15251) failed
[29111.598495] FAT-fs (sdb1): Directory bread(block 15252) failed
[29111.598497] FAT-fs (sdb1): Directory bread(block 15253) failed
[29111.598499] FAT-fs (sdb1): Directory bread(block 15254) failed
[29111.598501] FAT-fs (sdb1): Directory bread(block 15255) failed
[29111.598503] FAT-fs (sdb1): Directory bread(block 15256) failed
[29111.598505] FAT-fs (sdb1): Directory bread(block 15257) failed
[30768.947312] fat__get_entry: 54 callbacks suppressed
[30768.947320] FAT-fs (sdb1): Directory bread(block 15248) failed
[30768.947325] FAT-fs (sdb1): Directory bread(block 15249) failed
[30768.947328] FAT-fs (sdb1): Directory bread(block 15250) failed
[30768.947331] FAT-fs (sdb1): Directory bread(block 15251) failed
[30768.947334] FAT-fs (sdb1): Directory bread(block 15252) failed
[30768.947337] FAT-fs (sdb1): Directory bread(block 15253) failed
[30768.947340] FAT-fs (sdb1): Directory bread(block 15254) failed
[30768.947342] FAT-fs (sdb1): Directory bread(block 15255) failed
[30768.947345] FAT-fs (sdb1): Directory bread(block 15256) failed
[30768.947348] FAT-fs (sdb1): Directory bread(block 15257) failed
[30770.381967] FAT-fs (sdb1): bread failed in fat_clusters_flush
[36028.663546] usb 5-2: USB disconnect, device number 2
[36034.386419] usb 5-2: new low-speed USB device number 3 using ohci-pci
[36034.553595] usb 5-2: New USB device found, idVendor=046d, idProduct=c077
[36034.553608] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[36034.553616] usb 5-2: Product: USB Optical Mouse
[36034.553621] usb 5-2: Manufacturer: Logitech
[36034.563035] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/0003:046D:C077.0002/input/input14
[36034.619132] hid-generic 0003:046D:C077.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-2/input0Hors ligne
#16 Le 01/11/2016, à 15:10
- Bougron
Re : Carte MicroSD non détectée
Bizarre, Le périph n'est plus accédé
Cela sent très mauvais pour la suite https://www.redhat.com/archives/redhat- … 00040.html
Heureusement on a 4 yeux pour suivre ton problème.
Dernière modification par Bougron (Le 01/11/2016, à 15:18)
Hors ligne
#17 Le 01/11/2016, à 15:11
- MicP
Re : Carte MicroSD non détectée
…J'ai rien qui ne s'affiche après avoir connecté ma carte SD…
Même pas un truc comme ça ?
michel@debg53sw:~$ udisksctl monitor
Monitoring the udisks daemon. Press Ctrl+C to exit.
15:07:39.897: The udisks-daemon is running (name-owner :1.31).As-tu attendu quelques seconde avant de fermer la fenêtre,
laisse la ouverte pendant tes manipulations, il doit au moins s'afficher la détection de la carte,
même s'il ne s'affiche rien concernant le système de fichiers HS de la partition.
=======
Cela dit, Si tu compte utiliser ta carte SD sur ton smartphone, il vaudra mieux que ce soit lui qui la formate avec le système de fichier qui lui convient.
Hors ligne
#18 Le 01/11/2016, à 15:15
- M4gie
Re : Carte MicroSD non détectée
udisksctl monitor:
Monitoring the udisks daemon. Press Ctrl+C to exit.
15:13:12.107: The udisks-daemon is running (name-owner :1.82).cela peut venir de l'adaptateur je fais le test avec un autre?
Hors ligne
#19 Le 01/11/2016, à 15:18
- M4gie
Re : Carte MicroSD non détectée
Je viens de changer d'adaptateur usb et j'arrive à nouveau à ouvrir ma micro-carte maintenant je souhaite la formater afin de ne plus avoir de problème, pour avoir une carte clean sans soucis
Dernière modification par M4gie (Le 01/11/2016, à 15:18)
Hors ligne
#20 Le 01/11/2016, à 15:25
- MicP
Re : Carte MicroSD non détectée
Et maintenant que la panne matérielle a été trouvée et "réparée"
que donne
udisksctl monitorquand tu connecte ta carte après avoir lancé la commande ?
=======
Pour le formatage, il vaudra mieux le faire depuis ton smartphone qui va de toutes façons imposer son système de fichier qui est parfois un peu spécial…
Si ce n'est pas possible avec le smartphone, on pourra sans doute recréer une table des partitions de type msdos avec GParted,
puis la mettre dans le smartphone pour qu'il puise y créé son système de fichiers.
Dernière modification par MicP (Le 01/11/2016, à 15:28)
Hors ligne
#21 Le 01/11/2016, à 15:26
- M4gie
Re : Carte MicroSD non détectée
udisksctl monitor:
Monitoring the udisks daemon. Press Ctrl+C to exit.
15:25:43.602: The udisks-daemon is running (name-owner :1.82).
15:25:49.850: Added /org/freedesktop/UDisks2/drives/USB_2_2e0_SD_MMC_Reader_812320080329
org.freedesktop.UDisks2.Drive:
CanPowerOff: true
Configuration: {}
ConnectionBus: usb
Ejectable: true
Id: USB-2.0-SD-MMC-Reader-812320080329
Media:
MediaAvailable: true
MediaChangeDetected: true
MediaCompatibility:
MediaRemovable: true
Model: SD MMC Reader
Optical: false
OpticalBlank: false
OpticalNumAudioTracks: 0
OpticalNumDataTracks: 0
OpticalNumSessions: 0
OpticalNumTracks: 0
Removable: true
Revision: 0201
RotationRate: -1
Seat: seat0
Serial: 812320080329
SiblingId: /sys/devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0
Size: 31914983424
SortKey: 01hotplug/1478010349848911
TimeDetected: 1478010349848911
TimeMediaDetected: 1478010349848911
Vendor: USB 2.0
WWN:
15:25:49.853: Added /org/freedesktop/UDisks2/block_devices/sdb
org.freedesktop.UDisks2.Block:
Configuration: []
CryptoBackingDevice: '/'
Device: /dev/sdb
DeviceNumber: 2064
Drive: '/org/freedesktop/UDisks2/drives/USB_2_2e0_SD_MMC_Reader_812320080329'
HintAuto: true
HintIconName:
HintIgnore: false
HintName:
HintPartitionable: true
HintSymbolicIconName:
HintSystem: false
Id:
IdLabel:
IdType:
IdUUID:
IdUsage:
IdVersion:
MDRaid: '/'
MDRaidMember: '/'
PreferredDevice: /dev/sdb
ReadOnly: false
Size: 31914983424
Symlinks: /dev/disk/by-id/usb-USB_2.0_SD_MMC_Reader_812320080329-0:0
/dev/disk/by-path/pci-0000:00:12.2-usb-0:1:1.0-scsi-0:0:0:0
org.freedesktop.UDisks2.PartitionTable:
Type: dos
15:25:49.965: Added /org/freedesktop/UDisks2/block_devices/sdb1
org.freedesktop.UDisks2.Block:
Configuration: []
CryptoBackingDevice: '/'
Device: /dev/sdb1
DeviceNumber: 2065
Drive: '/org/freedesktop/UDisks2/drives/USB_2_2e0_SD_MMC_Reader_812320080329'
HintAuto: true
HintIconName:
HintIgnore: false
HintName:
HintPartitionable: true
HintSymbolicIconName:
HintSystem: false
Id: by-uuid-01F6-1A1B
IdLabel:
IdType: vfat
IdUUID: 01F6-1A1B
IdUsage: filesystem
IdVersion: FAT32
MDRaid: '/'
MDRaidMember: '/'
PreferredDevice: /dev/sdb1
ReadOnly: false
Size: 31913934848
Symlinks: /dev/disk/by-id/usb-USB_2.0_SD_MMC_Reader_812320080329-0:0-part1
/dev/disk/by-path/pci-0000:00:12.2-usb-0:1:1.0-scsi-0:0:0:0-part1
/dev/disk/by-uuid/01F6-1A1B
org.freedesktop.UDisks2.Filesystem:
MountPoints:
org.freedesktop.UDisks2.Partition:
Flags: 128
IsContained: false
IsContainer: false
Name:
Number: 1
Offset: 1048576
Size: 31913934848
Table: '/org/freedesktop/UDisks2/block_devices/sdb'
Type: 0x0c
UUID:
15:25:50.102: Added /org/freedesktop/UDisks2/jobs/21
org.freedesktop.UDisks2.Job:
Bytes: 0
Cancelable: true
ExpectedEndTime: 0
Objects: ['/org/freedesktop/UDisks2/block_devices/sdb1']
Operation: filesystem-mount
Progress: 0.0
ProgressValid: false
Rate: 0
StartTime: 1478010350093815
StartedByUID: 1000
15:25:50.130: /org/freedesktop/UDisks2/block_devices/sdb1: org.freedesktop.UDisks2.Filesystem: Properties Changed
MountPoints: /media/steeven/01F6-1A1B
15:25:50.130: /org/freedesktop/UDisks2/jobs/21: org.freedesktop.UDisks2.Job::Completed (true, '')
15:25:50.133: Removed /org/freedesktop/UDisks2/jobs/21Hors ligne
#22 Le 01/11/2016, à 15:33
- MicP
Re : Carte MicroSD non détectée
Nickel : on peut voir que le système de fichier est maintenant accesssible.
Il s'agit d'un système FAT32 que tu pourra facilement formater avec GParted.
Tu peux toutefois tenter d'abord de le monter pour voir s'il n'y aurait pas des fichiers à récupérer
udisksctl mount -b /dev/sdb1Et il devrait te répondre en te donnant le point de montage qu'il a créé et utilisé.
EDIT : Je n'avais pas vu les dernières lignes qui indiquent que tu avais mounté le système de fichiers.
Si ton compte utilisateur est steeven
Ce devrait être
/media/steeven/01F6-1A1BTu pourra y accéder avec ton gestionnaire de fichier en mode graphique ou autre.
Sinon, tu ouvres GParted et tu formate /dev/sdb1
Dernière modification par MicP (Le 01/11/2016, à 15:43)
Hors ligne
#23 Le 01/11/2016, à 15:36
- M4gie
Re : Carte MicroSD non détectée
Il ne me propose pas de formater, je peux démonter, gérer les drapeaux et voir les informations
Hors ligne
#24 Le 01/11/2016, à 15:38
- M4gie
Re : Carte MicroSD non détectée
dmesg | tail -60:
[30768.947345] FAT-fs (sdb1): Directory bread(block 15256) failed
[30768.947348] FAT-fs (sdb1): Directory bread(block 15257) failed
[30770.381967] FAT-fs (sdb1): bread failed in fat_clusters_flush
[36028.663546] usb 5-2: USB disconnect, device number 2
[36034.386419] usb 5-2: new low-speed USB device number 3 using ohci-pci
[36034.553595] usb 5-2: New USB device found, idVendor=046d, idProduct=c077
[36034.553608] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[36034.553616] usb 5-2: Product: USB Optical Mouse
[36034.553621] usb 5-2: Manufacturer: Logitech
[36034.563035] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/0003:046D:C077.0002/input/input14
[36034.619132] hid-generic 0003:046D:C077.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-2/input0
[37860.355079] usb 1-1: new high-speed USB device number 9 using ehci-pci
[37860.488946] usb 1-1: New USB device found, idVendor=14cd, idProduct=8123
[37860.488960] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[37860.488967] usb 1-1: Product: USB 2.0 SD MMC READER
[37860.488973] usb 1-1: Manufacturer: SDMMC MA8123
[37860.488978] usb 1-1: SerialNumber: 812320080329
[37860.490306] usb-storage 1-1:1.0: USB Mass Storage device detected
[37860.493489] scsi host8: usb-storage 1-1:1.0
[37861.493054] scsi 8:0:0:0: Direct-Access USB 2.0 SD MMC Reader PQ: 0 ANSI: 0 CCS
[37861.501797] sd 8:0:0:0: Attached scsi generic sg2 type 0
[37861.502622] sd 8:0:0:0: [sdb] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[37861.503237] sd 8:0:0:0: [sdb] Write Protect is off
[37861.503245] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00
[37861.503836] sd 8:0:0:0: [sdb] No Caching mode page found
[37861.503845] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[37861.511083] sdb: sdb1
[37861.515199] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[37861.900897] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[38381.759001] usb usb1-port1: disabled by hub (EMI?), re-enabling...
[38381.759019] usb 1-1: USB disconnect, device number 9
[38382.153366] usb 1-1: new high-speed USB device number 10 using ehci-pci
[38382.561391] usb 4-1: new full-speed USB device number 2 using ohci-pci
[38382.716434] usb 4-1: not running at top speed; connect to a high speed hub
[38382.728459] usb 4-1: New USB device found, idVendor=14cd, idProduct=8123
[38382.728467] usb 4-1: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[38382.728471] usb 4-1: Product: USB 2.0 SD MMC READER
[38382.728474] usb 4-1: Manufacturer: SDMMC MA8123
[38382.728476] usb 4-1: SerialNumber: 812320080329
[38382.731154] usb-storage 4-1:1.0: USB Mass Storage device detected
[38382.731295] scsi host9: usb-storage 4-1:1.0
[38383.615400] usb 4-1: USB disconnect, device number 2
[38387.417507] usb 1-1: new high-speed USB device number 11 using ehci-pci
[38387.551299] usb 1-1: New USB device found, idVendor=14cd, idProduct=8123
[38387.551312] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[38387.551320] usb 1-1: Product: USB 2.0 SD MMC READER
[38387.551326] usb 1-1: Manufacturer: SDMMC MA8123
[38387.551331] usb 1-1: SerialNumber: 812320080329
[38387.552734] usb-storage 1-1:1.0: USB Mass Storage device detected
[38387.556524] scsi host10: usb-storage 1-1:1.0
[38388.555464] scsi 10:0:0:0: Direct-Access USB 2.0 SD MMC Reader PQ: 0 ANSI: 0 CCS
[38388.557207] sd 10:0:0:0: Attached scsi generic sg2 type 0
[38388.567517] sd 10:0:0:0: [sdb] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[38388.568345] sd 10:0:0:0: [sdb] Write Protect is off
[38388.568352] sd 10:0:0:0: [sdb] Mode Sense: 03 00 00 00
[38388.569032] sd 10:0:0:0: [sdb] No Caching mode page found
[38388.569040] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[38388.579851] sdb: sdb1
[38388.585004] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[38388.991062] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.Hors ligne
#25 Le 01/11/2016, à 15:39
- MicP
Re : Carte MicroSD non détectée
Donc, tout va bien : Çe n'était qu'une panne matérielle.
Hors ligne