Pages : 1
#1 Le 11/06/2017, à 09:40
- ATTSSystem
SSD NVMe non detecte Xiaomi Air 13
Bonjour,
D'abord je vous prie de bien vouloir m'excuser pour les accents et les cedilles mais je suis en qwerty et j'avoue ne pas avoir la motivation de m'occuper de ca pour l'instant ^^. Sinon venons en au probleme, il y a deux semaines Windows 10 a plante dans un BSOD ("CRITICAL PROCESS DIED") et ce quasiment a chaque demarrage... Malheureusement je ne pouvais acceder au SSD ni depuis un live Ubuntu (14.04, 16.04, 16.10, 17.04, 17.10)... lspci voit bien le controleur :
03:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM951/PM951 (rev 01)ainsi que lshw :
*-storage NON-RÉCLAMÉ
description: Non-Volatile memory controller
produit: NVMe SSD Controller SM951/PM951
fabriquant: Samsung Electronics Co Ltd
identifiant matériel: 0
information bus: pci@0000:03:00.0
version: 01
bits: 64 bits
horloge: 33MHz
fonctionnalités: storage nvm_express cap_list
configuration: latency=0
ressources: mémoire:a4000000-a4003fff portE/S:3000(taille=256)J'ai actuellement installe un second SSD sur le port SATA de mon portable et celui fonctionne parfaitement et j'ai Ubuntu 17.04 dessus. Il est a note que d'un reboot a l'autre lspci et lshw ne le voit pas forcement, de plus apres un fdisk -l qui ne retourne soit rien soit
fdisk: impossible d'ouvrir /dev/nvme0n1: Erreur d'entrée/sortiedmesg retourne quant a lui differentes erreurs selon son humeur, cette fois-ci :
[ 74.943140] nvme nvme0: I/O 802 QID 3 timeout, aborting
[ 105.788632] nvme nvme0: I/O 802 QID 3 timeout, reset controller
[ 135.772454] nvme nvme0: I/O 251 QID 0 timeout, reset controller
[ 166.844428] blk_update_request: I/O error, dev nvme0n1, sector 500118016
[ 166.844449] nvme nvme0: completing aborted command with status: fffffffc
[ 166.844451] blk_update_request: I/O error, dev nvme0n1, sector 0
[ 166.844464] nvme nvme0: Abort status: 0xfffc
[ 197.440185] nvme nvme0: Device not ready; aborting initialisation
[ 197.440189] nvme nvme0: Removing after probe failure status: -19
[ 197.472195] nvme0n1: detected capacity change from 256060514304 to 0
[ 197.472273] blk_update_request: I/O error, dev nvme0n1, sector 500118016
[ 197.472274] blk_update_request: I/O error, dev nvme0n1, sector 0
[ 197.472277] Buffer I/O error on dev nvme0n1, logical block 0, async page read
[ 197.472281] Buffer I/O error on dev nvme0n1, logical block 62514752, async page read
[ 197.472301] blk_update_request: I/O error, dev nvme0n1, sector 0
[ 197.472304] Buffer I/O error on dev nvme0n1, logical block 0, async page readJ'ai cherche pour toutes les erreurs sans resultats, je vous remercie donc par avance pour votre aide.
Dernière modification par ATTSSystem (Le 11/06/2017, à 09:40)
Hors ligne
#2 Le 11/06/2017, à 13:19
- malbo
Re : SSD NVMe non detecte Xiaomi Air 13
ATTSSystem a écrit :
J'ai actuellement installe un second SSD sur le port SATA de mon portable et celui fonctionne parfaitement et j'ai Ubuntu 17.04 dessus.
C'est parfait. Ainsi tu pourras faire un rapport Bisnext(*) depuis une session de ce Ubuntu 17.04 installé. On y verra encore plus d'infos utiles.
(*) c'est le paragraphe 2 de la doc qui convient puisqu'il s'agit d'une session standard (et non pas une session live)
Hors ligne
#3 Le 11/06/2017, à 13:31
- ATTSSystem
Re : SSD NVMe non detecte Xiaomi Air 13
Voila ^^ :
https://paste.debian.net/971008/
Hors ligne
#4 Le 11/06/2017, à 13:43
- Laurent85
Re : SSD NVMe non detecte Xiaomi Air 13
[ 2184.104491] nvme nvme0: I/O 550 QID 1 timeout, aborting
[ 2184.104498] nvme nvme0: I/O 551 QID 1 timeout, aborting
[ 2214.120192] nvme nvme0: I/O 550 QID 1 timeout, reset controller
[ 2244.328066] nvme nvme0: I/O 168 QID 0 timeout, reset controller
[ 2274.535946] nvme nvme0: completing aborted command with status: 0007
[ 2274.535948] blk_update_request: I/O error, dev nvme0n1, sector 256
[ 2274.535954] nvme nvme0: Abort status: 0x7
[ 2274.535961] nvme nvme0: completing aborted command with status: fffffffc
[ 2274.535962] blk_update_request: I/O error, dev nvme0n1, sector 0
[ 2274.551973] nvme nvme0: Abort status: 0xfffc
[ 2305.123734] nvme nvme0: Removing after probe failure status: -19
[ 2305.124010] blk_update_request: I/O error, dev nvme0n1, sector 0
[ 2305.124024] Buffer I/O error on dev nvme0n1, logical block 0, async page readBonjour, c'est une panne matériel.
Hors ligne
#5 Le 11/06/2017, à 13:45
- ATTSSystem
Re : SSD NVMe non detecte Xiaomi Air 13
Panne matérielle, il est mort? Il n'a que 3 mois
Hors ligne
#6 Le 11/06/2017, à 13:58
- Laurent85
Re : SSD NVMe non detecte Xiaomi Air 13
Mort je ne sais pas, le journal système crache plein d'erreurs matérielles, si ça marchait avant il faut croire que oui.
Dernière modification par Laurent85 (Le 11/06/2017, à 13:59)
Hors ligne
#7 Le 11/06/2017, à 14:56
- malbo
Re : SSD NVMe non detecte Xiaomi Air 13
Je colle ci-dessous l'intégralité du rapport Bisnext dont tu as donné le lien dans le post #3 :
Posting 971008 from bn-64db3 posted at 2017-06-11 12:30:07 expires: 2017-07-11 12:30:07
Jun 11, 2017, bisnext report id 64db3
bisnext 0.03
============================ Hardware and System Summary ======================
System: Kernel: 4.10.0-22-generic x86_64 (64 bit gcc: 6.3.0)
Desktop: N/A dm: lightdm Distro: Ubuntu 17.04
Machine: Device: laptop System: Timi product: TM1613 v: A05
Mobo: Timi model: TM1613 v: A05
UEFI: Insyde v: A05 date: 08/11/2016
Battery BAT0: charge: 49.2 Wh 95.0% condition: 51.9/52.3 Wh (99%)
volts: 8.8/7.7
model: CPT-COS R13 status: Charging
CPU: Dual core Intel Core i5-6200U (-HT-MCP-) cache: 3072 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9600
clock speeds: min/max: 400/2401 MHz 1: 2100 MHz 2: 2100 MHz
3: 2100 MHz 4: 2100 MHz
Memory: Array-1 capacity: 32 GB devices: 2 EC: None
Device-1: ChannelA-DIMM0 size: 8 GB speed: 2133 MHz type: DDR4
manufacturer: Samsung part: M471A1K43BB0-CPB
Device-2: ChannelA-DIMM1 size: No Module Installed type: N/A
Device-3: ChannelB-DIMM0 size: No Module Installed type: N/A
Device-4: ChannelB-DIMM1 size: No Module Installed type: N/A
Graphics: Card-1: Intel HD Graphics 520 bus-ID: 00:02.0 chip-ID: 8086:1916
Card-2: NVIDIA GM108M [GeForce 940MX]
bus-ID: 01:00.0 chip-ID: 10de:134b
Display Server: X.Org 1.19.3 drivers: modesetting (unloaded: fbdev,vesa)
Resolution: 1920x1080@59.93hz, 1920x1080@60.00hz
GLX Renderer: Mesa DRI Intel HD Graphics 520 (Skylake GT2)
GLX Version: 4.5 Mesa 17.0.3 (compat-v: 3.0) Direct Rendering: Yes
Audio: Card Intel Sunrise Point-LP HD Audio
driver: snd_hda_intel bus-ID: 00:1f.3 chip-ID: 8086:9d70
Sound: Advanced Linux Sound Architecture v: k4.10.0-22-generic
Network: Card: Intel Wireless 8260
driver: iwlwifi bus-ID: 02:00.0 chip-ID: 8086:24f3
IF: wlp2s0 state: up mac: <filter>
Drives: HDD Total Size: 525.1GB (36.0% used)
ID-1: /dev/nvme0n1 model: N/A size: 256.1GB
ID-2: /dev/sda model: Crucial_CT525MX3 size: 525.1GB
Optical: No optical drives detected.
Partition: ID-1: / size: 480G used: 177G (39%) fs: ext4 dev: /dev/sda2
label: N/A uuid: e9bd8f35-cc43-4cec-bbed-7f4354ebde3f
ID-2: /boot/efi size: 511M used: 3.5M (1%) fs: vfat dev: /dev/sda1
label: N/A uuid: 0422-2E0C
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/nvme0n1 size: 256.06G label: N/A uuid: N/A
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb http://fr.archive.ubuntu.com/ubuntu/ zesty main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ zesty-updates main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ zesty universe
deb http://fr.archive.ubuntu.com/ubuntu/ zesty-updates universe
deb http://fr.archive.ubuntu.com/ubuntu/ zesty multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ zesty-updates multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ zesty-backports main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu zesty-security main restricted
deb http://security.ubuntu.com/ubuntu zesty-security universe
deb http://security.ubuntu.com/ubuntu zesty-security multiverse
deb https://dl.winehq.org/wine-builds/ubuntu/ zesty main
Active apt sources in file: /etc/apt/sources.list.d/bumblebee-ubuntu-stable-zesty.list
deb http://ppa.launchpad.net/bumblebee/stable/ubuntu zesty main
Active apt sources in file: /etc/apt/sources.list.d/dolphin-emu-ubuntu-ppa-zesty.list
deb http://ppa.launchpad.net/dolphin-emu/ppa/ubuntu zesty main
Active apt sources in file: /etc/apt/sources.list.d/google-chrome.list
deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main
Active apt sources in file: /etc/apt/sources.list.d/owncloud-client.list
deb http://download.opensuse.org/repositories/isv:/ownCloud:/desktop/Ubuntu_17.04/ /
Active apt sources in file: /etc/apt/sources.list.d/steam.list
deb [arch=amd64,i386] http://repo.steampowered.com/steam/ precise steam
deb-src [arch=amd64,i386] http://repo.steampowered.com/steam/ precise steam
Active apt sources in file: /etc/apt/sources.list.d/videolan-ubuntu-stable-daily-zesty.list
deb http://ppa.launchpad.net/videolan/stable-daily/ubuntu zesty main
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 53.4% command: chrome pid: 2564 mem: 493.26MB (6.2%)
2: cpu: 9.0% command: chrome pid: 2476 mem: 257.67MB (3.2%)
3: cpu: 8.5% command: chrome pid: 2550 mem: 190.89MB (2.4%)
4: cpu: 7.0% command: compiz pid: 1935 mem: 184.91MB (2.3%)
5: cpu: 5.1% command: chrome pid: 4087 mem: 449.54MB (5.7%)
6: cpu: 4.7% command: Xorg pid: 1226 mem: 97.44MB (1.2%)
7: cpu: 2.0% command: chrome pid: 4459 mem: 123.72MB (1.5%)
8: cpu: 1.6% command: pulseaudio pid: 1881 mem: 12.02MB (0.1%)
9: cpu: 1.0% command: gnome-terminal-server pid: 2299 mem: 39.54MB (0.5%)
10: cpu: 0.8% command: chrome pid: 4012 mem: 134.47MB (1.7%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 493.77MB (6.2%) command: chrome pid: 2564 cpu: 53.4%
2: mem: 449.54MB (5.7%) command: chrome pid: 4087 cpu: 5.1%
3: mem: 257.67MB (3.2%) command: chrome pid: 2476 cpu: 9.0%
4: mem: 241.69MB (3.0%) command: chrome pid: 2616 cpu: 0.7%
5: mem: 190.89MB (2.4%) command: chrome pid: 2550 cpu: 8.5%
6: mem: 184.91MB (2.3%) command: compiz pid: 1935 cpu: 7.0%
7: mem: 161.19MB (2.0%) command: chrome pid: 3851 cpu: 0.3%
8: mem: 134.47MB (1.7%) command: chrome pid: 4012 cpu: 0.8%
9: mem: 123.72MB (1.5%) command: chrome pid: 4459 cpu: 2.0%
10: mem: 118.97MB (1.5%) command: chrome pid: 4187 cpu: 0.4%
Info: Processes: 265 Uptime: 38 min Memory: 2313.9/7876.9MB
Init: systemd v: 232 runlevel: 5 default: 2 Gcc sys: 6.3.0
Client: Shell (bash 4.4.71 running in bash) inxi: 2.3.19
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0001,2001,2002,2003
Boot0001* ubuntu HD(1,GPT,20af63b1-3769-4af7-ab1e-aad509ff9285,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC
vfat partition details:
/dev/sda1: UUID="0422-2E0C" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="20af63b1-3769-4af7-ab1e-aad509ff9285"
__________________________________ Secure Boot ________________________________
Secure Boot disabled or not available on this system.
__________________________________ OS prober ________________________________
None
_____________________________ md5sum of EFI files _____________________________
EFI files in /dev/sda1:
04461732d55beb15f0f29f59eca7f418 /EFI/ubuntu/grubx64.efi
0f08ecaaa01879b16987aeafd1fe20cc /EFI/ubuntu/fwupx64.efi
3aef9c72ad50faa8db576c01f85a0915 /EFI/ubuntu/shimx64.efi
61c7898dd613614b15cee0081226572c /EFI/ubuntu/fbx64.efi
bf39cf9416a9403d40a9b69541486e74 /EFI/ubuntu/mmx64.efi
========================= Boot Information Details ============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/ubuntu/fwupx64.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi
/EFI/ubuntu/mmx64.efi /EFI/ubuntu/fbx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 17.04
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disque /dev/sda : 489,1 GiB, 525112713216 octets, 1025610768 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,025,610,767 1,025,610,767 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 1,025,609,727 1,024,559,104 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 0422-2E0C vfat
/dev/sda2 e9bd8f35-cc43-4cec-bbed-7f4354ebde3f ext4
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 juin 11 13:51 ata-Crucial_CT525MX300SSD4_170615BA7832 -> ../../sda
lrwxrwxrwx 1 root root 10 juin 11 13:51 ata-Crucial_CT525MX300SSD4_170615BA7832-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 juin 11 13:51 ata-Crucial_CT525MX300SSD4_170615BA7832-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 juin 11 13:51 wwn-0x500a075115ba7832 -> ../../sda
lrwxrwxrwx 1 root root 10 juin 11 13:51 wwn-0x500a075115ba7832-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 juin 11 13:51 wwn-0x500a075115ba7832-part2 -> ../../sda2
_________________________ "ls -R /dev/mapper/" output _________________________
None
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sda2 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda1 /boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
__________________________=== Boot Files Content ===___________________________
__________________________ sda1/EFI/ubuntu/grub.cfg: ___________________________
search.fs_uuid e9bd8f35-cc43-4cec-bbed-7f4354ebde3f root hd0,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
___________________________ sda2/boot/grub/grub.cfg: ___________________________
File size: 10692, Line count: 296, Menu entries (sub entries included) : 8
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file content from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-e9bd8f35-cc43-4cec-bbed-7f4354ebde3f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 e9bd8f35-cc43-4cec-bbed-7f4354ebde3f
else
search --no-floppy --fs-uuid --set=root e9bd8f35-cc43-4cec-bbed-7f4354ebde3f
fi
linux /boot/vmlinuz-4.10.0-22-generic.efi.signed root=UUID=e9bd8f35-cc43-4cec-bbed-7f4354ebde3f ro quiet splash intel_pstate=disable $vt_handoff
initrd /boot/initrd.img-4.10.0-22-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sda2/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=e9bd8f35-cc43-4cec-bbed-7f4354ebde3f / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=0422-2E0C /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
____________________________ sda2/etc/default/grub: ____________________________
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash intel_pstate=disable"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
_________ Devices which don't seem to have a corresponding hard drive: _________
nvme0n1
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/boot/vmlinuz-4.10.0-22-generic.efi.signed root=UUID=e9bd8f35-cc43-4cec-bbed-7f4354ebde3f ro quiet splash intel_pstate=disable vt.handoff=7
______________________________ Boot-up Statistics ______________________________
Startup finished in 3.592s (firmware) + 3.671s (loader) + 2.356s (kernel) + 3.098s (userspace) = 12.718s
blame, first 10:
fwupd.service 2.181s
apparmor.service 1.465s
plymouth-read-write.service 1.426s
systemd-backlight@backlight:intel_backlight.service 1.294s
dev-sda2.device 544ms
vboxdrv.service 461ms
systemd-resolved.service 449ms
networking.service 392ms
loadcpufreq.service 199ms
systemd-rfkill.service 109ms
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @3.092s
2 multi-user.target @3.092s
3 systemd-resolved.service @2.642s +449ms
4 network.target @2.640s
5 wpa_supplicant.service @3.062s +5ms
6 basic.target @2.250s
7 sockets.target @2.250s
8 snapd.socket @2.249s +667us
9 sysinit.target @2.247s
10 apparmor.service @780ms +1.465s
11 local-fs.target @778ms
12 boot-efi.mount @771ms +6ms
13 systemd-fsck@dev-disk-by\x2duuid-0422\x2d2E0C.service @736ms +33ms
14 dev-disk-by\x2duuid-0422\x2d2E0C.device @736ms
_________________________ RAM usage & Free disk space _________________________
total used free shared buff/cache available
Mem: 7.7G 2.1G 3.4G 756M 2.2G 4.6G
Swap: 2.0G 0B 2.0G
Swappiness = 60
Filesystem Mounted on Type Size Used Avail Use% IUse%
/dev/sda1 /boot/efi vfat 511M 3.5M 508M 1% -
/dev/sda2 / ext4 480G 177G 280G 39% 2%
_________________________________ USB devices __________________________________
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 8087:0a2b Intel Corp.
Bus 001 Device 002: ID 04f2:b5a3 Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
|__ Port 5: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 5: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 7: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 7: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M
_______________________________ Wireless Status _______________________________
0: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
___________________________________ Modules Loaded ____________________________
Module Size Used by
ac97_bus 16384 1 snd_soc_core
acpi_pad 180224 0
aesni_intel 167936 2
aes_x86_64 20480 1 aesni_intel
ahci 36864 2
arc4 16384 2
autofs4 40960 2
bbswitch 16384 0
bluetooth 557056 31 btrtl,btintel,bnep,btbcm,rfcomm,btusb
bnep 20480 2
btbcm 16384 1 btusb
btintel 16384 1 btusb
btrfs 1093632 0
btrtl 16384 1 btusb
btusb 45056 0
ccm 20480 1
cfg80211 602112 3 iwlmvm,iwlwifi,mac80211
coretemp 16384 0
crc32_pclmul 16384 0
crct10dif_pclmul 16384 0
cryptd 24576 3 crypto_simd,ghash_clmulni_intel,aesni_intel
crypto_simd 16384 1 aesni_intel
dell_wmi_aio 16384 0
drm 352256 6 i915,drm_kms_helper
drm_kms_helper 151552 1 i915
fb_sys_fops 16384 1 drm_kms_helper
fjes 73728 0
ghash_clmulni_intel 16384 0
glue_helper 16384 1 aesni_intel
hfs 57344 0
hfsplus 106496 0
hid 114688 1 i2c_hid
i2c_algo_bit 16384 1 i915
i2c_hid 20480 0
i915 1449984 116
input_leds 16384 0
intel_cstate 20480 0
intel_lpss 16384 1 intel_lpss_acpi
intel_lpss_acpi 16384 0
intel_powerclamp 16384 0
intel_rapl 20480 0
intel_rapl_perf 16384 0
ip_tables 24576 0
irqbypass 16384 1 kvm
iwlmvm 368640 0
iwlwifi 229376 1 iwlmvm
jfs 184320 0
joydev 20480 0
kvm 593920 1 kvm_intel
kvm_intel 200704 0
libahci 32768 1 ahci
libcrc32c 16384 1 xfs
lp 20480 0
mac80211 782336 1 iwlmvm
mac_hid 16384 0
media 40960 2 uvcvideo,videodev
mei 102400 1 mei_me
mei_me 40960 0
minix 36864 0
msdos 20480 0
nls_iso8859_1 16384 1
ntfs 102400 0
nvme 28672 0
nvme_core 57344 1 nvme
parport 49152 3 lp,parport_pc,ppdev
parport_pc 32768 0
pcbc 16384 0
pci_stub 16384 1
pinctrl_intel 20480 1 pinctrl_sunrisepoint
pinctrl_sunrisepoint 28672 0
ppdev 20480 0
psmouse 139264 0
qnx4 16384 0
raid6_pq 114688 1 btrfs
rfcomm 77824 2
serio_raw 16384 0
shpchp 36864 0
snd 77824 22 snd_compress,snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_soc_core,snd_pcm
snd_compress 20480 1 snd_soc_core
snd_hda_codec 126976 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 49152 1
snd_hda_codec_realtek 90112 1
snd_hda_core 81920 7 snd_hda_intel,snd_hda_codec,snd_hda_ext_core,snd_soc_skl,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_ext_core 24576 1 snd_soc_skl
snd_hda_intel 36864 5
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 102400 9 snd_hda_intel,snd_hda_codec,snd_pcm_dmaengine,snd_hda_ext_core,snd_hda_core,snd_soc_skl,snd_hda_codec_hdmi,snd_soc_core
snd_pcm_dmaengine 16384 1 snd_soc_core
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 65536 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_soc_core 233472 1 snd_soc_skl
snd_soc_skl 65536 0
snd_soc_skl_ipc 49152 1 snd_soc_skl
snd_soc_sst_dsp 28672 1 snd_soc_skl_ipc
snd_soc_sst_ipc 16384 1 snd_soc_skl_ipc
snd_soc_sst_match 16384 1 snd_soc_skl
snd_timer 32768 2 snd_seq,snd_pcm
soundcore 16384 1 snd
sparse_keymap 16384 1 dell_wmi_aio
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
tpm_crb 16384 0
ufs 73728 0
uvcvideo 90112 0
vboxdrv 462848 3 vboxnetadp,vboxnetflt,vboxpci
vboxnetadp 28672 0
vboxnetflt 28672 0
vboxpci 24576 0
video 40960 1 i915
videobuf2_core 40960 2 uvcvideo,videobuf2_v4l2
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 24576 1 uvcvideo
videobuf2_vmalloc 16384 1 uvcvideo
videodev 172032 3 uvcvideo,videobuf2_core,videobuf2_v4l2
wmi 16384 1 dell_wmi_aio
x86_pkg_temp_thermal 16384 0
xfs 1191936 0
xor 24576 1 btrfs
x_tables 36864 1 ip_tables
______________________________ Additional Drivers _____________________________
== /sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0 ==
modalias : pci:v000010DEd0000134Bsv00001D72sd00001602bc03sc02i00
vendor : NVIDIA Corporation
driver : xserver-xorg-video-nouveau - distro free builtin
driver : nvidia-375 - distro non-free recommended
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
__________________________________ Locales ___________________________________
locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE=fr_FR.UTF-8
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=
/etc/default/locale:
# File generated by update-locale
LANG="fr_FR.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: us,fr
variant: ,oss
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="us"
XKBVARIANT=""
XKBOPTIONS=""
BACKSPACE="guess"
_____________________________ Upgradable Packages _____________________________
dolphin-emu-data-master 5.0+git-r201706110002-f2a6e39-32~ubuntu17.04.1 from:5.0+git-r201706100002-0a69331-32~ubuntu17.04.1
dolphin-emu-master 5.0+git-r201706110002-f2a6e39-32~ubuntu17.04.1 from:5.0+git-r201706100002-0a69331-32~ubuntu17.04.1
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
__________________ Configuration files of uninstalled packages: ________________
Package Version
bogofilter 1.2.4+dfsg1-9
bogofilter-bdb 1.2.4+dfsg1-9
bogofilter-common 1.2.4+dfsg1-9
libpst4:amd64 0.6.59-1ubuntu1
thunderbird 1:45.8.0+build1-0ubuntu1
Use the following command to clean old configuration files:
sudo apt purge bogofilter bogofilter-bdb bogofilter-common libpst4:amd64 thunderbird
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 4.10.0.22.24
linux-headers-4.10.0-19 4.10.0-19.21
linux-headers-4.10.0-19-generic 4.10.0-19.21
linux-headers-4.10.0-22 4.10.0-22.24
linux-headers-4.10.0-22-generic 4.10.0-22.24
linux-headers-generic 4.10.0.22.24
linux-image-4.10.0-19-generic 4.10.0-19.21
linux-image-4.10.0-22-generic 4.10.0-22.24
linux-image-extra-4.10.0-19-generic 4.10.0-19.21
linux-image-extra-4.10.0-22-generic 4.10.0-22.24
linux-image-generic 4.10.0.22.24
linux-signed-generic 4.10.0.22.24
linux-signed-image-4.10.0-19-generic 4.10.0-19.21
linux-signed-image-4.10.0-22-generic 4.10.0-22.24
linux-signed-image-generic 4.10.0.22.24
Files in /boot directory:
abi-4.10.0-19-generic
abi-4.10.0-22-generic
config-4.10.0-19-generic
config-4.10.0-22-generic
efi
grub
initrd.img-4.10.0-19-generic
initrd.img-4.10.0-22-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.10.0-19-generic
System.map-4.10.0-22-generic
vmlinuz-4.10.0-19-generic
vmlinuz-4.10.0-19-generic.efi.signed
vmlinuz-4.10.0-22-generic
vmlinuz-4.10.0-22-generic.efi.signed
_________________________________ System Logs ________________________________
Failed services:
UNIT LOAD ACTIVE SUB DESCRIPTION
● nvidia-persistenced.service loaded failed failed NVIDIA Persistence Daemon
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.000000] efi: EFI v2.40 by INSYDE Corp.
[ 0.000000] efi: SMBIOS=0x7b430000 ESRT=0x7b53b018 ACPI 2.0=0x7cefd014 PROP=0x62c60238
[ 0.000000] ACPI: UEFI 0x000000007CEFB000 000236 (v01 XIAOMI SKL-ULT 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x000000007CEFA000 000042 (v01 XIAOMI SKL-ULT 00000002 ACPI 00040000)
[ 0.183535] ACPI Error: No handler for Region [RAM_] (ffff9562360e9bd0) [EmbeddedControl] (20160930/evregion-166)
[ 0.183541] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160930/exfldio-299)
[ 0.183545] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff9562360e8e10), AE_NOT_EXIST (20160930/psparse-543)
[ 0.183679] ACPI Error: No handler for Region [RAM_] (ffff9562360e9bd0) [EmbeddedControl] (20160930/evregion-166)
[ 0.183682] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160930/exfldio-299)
[ 0.183685] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff9562360e8e10), AE_NOT_EXIST (20160930/psparse-543)
[ 0.185337] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.197433] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x4f, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.197533] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.219324] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.270611] platform MSFT0101:00: failed to claim resource 1
[ 0.270615] acpi MSFT0101:00: platform device creation failed: -16
[ 0.270836] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x4f, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.271096] SCSI subsystem initialized
[ 0.271298] Registered efivars operations
[ 0.388103] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[ 1.217252] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.217937] efifb: probing for efifb
[ 1.217955] efifb: framebuffer at 0xb0000000, using 8128k, total 8128k
[ 1.217956] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 1.217956] efifb: scrolling: redraw
[ 1.217958] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.218091] fb0: EFI VGA frame buffer device
[ 1.243211] EFI Variables Facility v0.08 2004-May-17
[ 1.397845] scsi host0: ahci
[ 1.397973] scsi host1: ahci
[ 1.414726] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 1.430061] fb: switching to inteldrmfb from EFI VGA
[ 1.448634] [drm] GuC firmware load skipped
[ 1.646147] [Firmware Bug]: ACPI(PXSX) defines _DOD but not _DOS
[ 1.715128] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.718566] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.719382] scsi 0:0:0:0: Direct-Access ATA Crucial_CT525MX3 R040 PQ: 0 ANSI: 5
[ 1.778600] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.778779] sd 0:0:0:0: [sda] 1025610768 512-byte logical blocks: (525 GB/489 GiB)
[ 1.781241] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.641787] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 2.824998] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-26.ucode failed with error -2
[ 2.825021] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-25.ucode failed with error -2
[ 2.825033] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-24.ucode failed with error -2
[ 2.827631] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-23.ucode failed with error -2
[ 2.827669] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-22.ucode failed with error -2
[ 2.835695] iwlwifi 0000:02:00.0: loaded firmware version 21.302800.0 op_mode iwlmvm
[ 2.918083] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 2.920754] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 3.001980] thermal thermal_zone3: failed to read out thermal zone (-5)
[ 4.349308] Bluetooth: hci0: Waiting for firmware download to complete
[ 4.350064] Bluetooth: hci0: Firmware loaded in 1407594 usecs
[ 4.626943] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 4.698966] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 9.023187] wlp2s0: RX AssocResp from e0:ce:c3:d0:da:55 (capab=0x1011 status=0 aid=5)
[ 2184.104491] nvme nvme0: I/O 550 QID 1 timeout, aborting
[ 2184.104498] nvme nvme0: I/O 551 QID 1 timeout, aborting
[ 2214.120192] nvme nvme0: I/O 550 QID 1 timeout, reset controller
[ 2244.328066] nvme nvme0: I/O 168 QID 0 timeout, reset controller
[ 2274.535946] nvme nvme0: completing aborted command with status: 0007
[ 2274.535948] blk_update_request: I/O error, dev nvme0n1, sector 256
[ 2274.535954] nvme nvme0: Abort status: 0x7
[ 2274.535961] nvme nvme0: completing aborted command with status: fffffffc
[ 2274.535962] blk_update_request: I/O error, dev nvme0n1, sector 0
[ 2274.551973] nvme nvme0: Abort status: 0xfffc
[ 2305.123734] nvme nvme0: Removing after probe failure status: -19
[ 2305.124010] blk_update_request: I/O error, dev nvme0n1, sector 0
[ 2305.124024] Buffer I/O error on dev nvme0n1, logical block 0, async page read
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ XiaoMi USB 2.0 Webcam id=10 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)]
↳ Dell AIO WMI hotkeys id=13 [slave keyboard (3)]
xrandr:
Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 294mm x 165mm
1920x1080 59.93*+
1680x1050 59.95 59.88
1600x1024 60.17
1400x1050 59.98
1280x1024 60.02
1440x900 59.89
1280x960 60.00
1360x768 59.80 59.96
1152x864 60.00
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
960x600 60.00
960x540 59.99
800x600 60.00 60.32 56.25
840x525 60.01 59.88
800x512 60.17
700x525 59.98
640x512 60.02
720x450 59.89
640x480 60.00 59.94
680x384 59.80 59.96
576x432 60.06
512x384 60.00
400x300 60.32 56.34
320x240 60.05
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
HDMI-2 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 1280mm x 720mm
1920x1080 60.00*+ 50.00 59.94 30.00 25.00 24.00 29.97 23.98
1920x1080i 60.00 50.00 59.94
1600x1200 60.00
1280x1024 60.02
1360x768 59.95
1280x720 60.00 50.00 59.94
1024x768 60.00
800x600 60.32
720x576 50.00
720x576i 50.00
720x480 60.00 59.94
720x480i 60.00 59.94
640x480 60.00 59.94
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.156] (==) No Layout section. Using the first Screen section.
[ 5.156] (==) No screen section available. Using defaults.
[ 5.156] (**) |-->Screen "Default Screen Section" (0)
[ 5.156] (**) | |-->Monitor "<default monitor>"
[ 5.156] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5.165] (--) PCI:*(0:0:2:0) 8086:1916:1d72:1602 rev 7, Mem @ 0xa2000000/16777216, 0xb0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 5.165] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[ 5.165] (II) LoadModule: "glx"
[ 5.165] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.172] (II) LoadModule: "modesetting"
[ 5.172] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.172] (II) LoadModule: "fbdev"
[ 5.172] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 5.172] (II) LoadModule: "vesa"
[ 5.172] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 5.181] (WW) Falling back to old probe method for fbdev
[ 5.181] (II) Loading sub module "fbdevhw"
[ 5.181] (II) LoadModule: "fbdevhw"
[ 5.181] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 5.181] (WW) Falling back to old probe method for vesa
[ 5.181] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5.181] (II) Loading sub module "glamoregl"
[ 5.181] (II) LoadModule: "glamoregl"
[ 5.181] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 5.211] (II) modeset(0): Output eDP-1 has no monitor section
[ 5.212] (II) modeset(0): Output DP-1 has no monitor section
[ 5.396] (II) modeset(0): Output HDMI-1 has no monitor section
[ 5.404] (II) modeset(0): Output HDMI-2 has no monitor section
[ 5.597] (II) Loading sub module "fb"
[ 5.597] (II) LoadModule: "fb"
[ 5.598] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.598] (II) UnloadModule: "fbdev"
[ 5.598] (II) UnloadModule: "vesa"
[ 5.681] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5.683] (II) modeset(0): Setting screen physical size to 508 x 285
[ 5.713] (II) LoadModule: "libinput"
[ 5.713] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 5.915] (II) LoadModule: "synaptics"
[ 5.915] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.10.0-22-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.10.0-22-generic/updates/dkms
Found nvidia module: nvidia_375_drm.ko
Is nvidia loaded? yes
Was nvidia unloaded? no
Is nvidia blacklisted? yes
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? yes
Is fglrx kernel module available? no
Is nvidia kernel module available? yes
Vendor/Device Id: 8086:1916
BusID "PCI:0@0:2:0"
Is boot vga? yes
Vendor/Device Id: 10de:134b
BusID "PCI:1@0:0:0"
Is boot vga? no
Skipping "/dev/dri/card1", driven by "i915"
Skipping "/dev/dri/card1", driven by "i915"
Skipping "/dev/dri/card1", driven by "i915"
Found "/dev/dri/card1", driven by "i915"
output 0:
card1-eDP-1
Number of connected outputs for /dev/dri/card1: 1
Does it require offloading? yes
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? yes
How many cards? 2
The number of cards has changed!
Has the system changed? Yes
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? yes
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? yes
Is prime egl available? no
System configuration has changed
Intel IGP detected
Intel hybrid system
can't open /sys/module/nvidia/version
/sys/class/dmi/id/product_version="A05"
/sys/class/dmi/id/product_name="TM1613"
1st try: bbswitch without quirks
Loading bbswitch with "load_state=-1 unload_state=1" parameters
Selecting prime
/usr/bin/update-alternatives --set x86_64-linux-gnu_gl_conf /usr/lib/nvidia-375-prime/ld.so.conf
update-alternatives status 0
Calling ldconfig
ldconfig status 0
/usr/bin/update-alternatives --set i386-linux-gnu_gl_conf /usr/lib/nvidia-375-prime/alt_ld.so.conf
update-alternatives status 0
Calling ldconfig
ldconfig status 0
/usr/bin/update-alternatives --set x86_64-linux-gnu_egl_conf /usr/lib/nvidia-375-prime/ld.so.conf
update-alternatives status 0
Calling ldconfig
ldconfig status 0
/usr/bin/update-alternatives --set i386-linux-gnu_egl_conf /usr/lib/nvidia-375-prime/alt_ld.so.conf
update-alternatives status 0
Calling ldconfig
ldconfig status 0
Removing xorg.conf. Path: /etc/X11/xorg.conf
Moved /etc/X11/xorg.conf to /etc/X11/xorg.conf.06112017
Powering off the discrete card
Disabling persistence mode
Unloading nvidia-uvm with "no" parameters
Unloading nvidia-drm with "no" parameters
Unloading nvidia-modeset with "no" parameters
Unloading nvidia with "no" parameters
Nvidia packages and kernel files:
nvidia-375 375.66-0ubuntu0.17.04.1
nvidia-opencl-icd-375 375.66-0ubuntu0.17.04.1
nvidia-prime 0.8.4
nvidia-settings 367.35-0ubuntu1
bbswitch-dkms 0.8-4ubuntu1
Apr 6 18:28 /lib/modules/4.10.0-19-generic/kernel/drivers/video/fbdev/nvidia/nvidiafb.ko
Jun 9 17:05 /lib/modules/4.10.0-19-generic/updates/dkms/nvidia_375.ko
Jun 9 17:05 /lib/modules/4.10.0-19-generic/updates/dkms/nvidia_375_drm.ko
Jun 9 17:05 /lib/modules/4.10.0-19-generic/updates/dkms/nvidia_375_modeset.ko
Jun 9 17:05 /lib/modules/4.10.0-19-generic/updates/dkms/nvidia_375_uvm.ko
May 17 23:13 /lib/modules/4.10.0-22-generic/kernel/drivers/video/fbdev/nvidia/nvidiafb.ko
Jun 10 22:15 /lib/modules/4.10.0-22-generic/updates/dkms/nvidia_375.ko
Jun 10 22:15 /lib/modules/4.10.0-22-generic/updates/dkms/nvidia_375_drm.ko
Jun 10 22:15 /lib/modules/4.10.0-22-generic/updates/dkms/nvidia_375_modeset.ko
Jun 10 22:15 /lib/modules/4.10.0-22-generic/updates/dkms/nvidia_375_uvm.ko
Jun 9 17:04 /lib/nvidia-375
============================ Disks SMART Attributes ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-22-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Crucial_CT525MX300SSD4
LU WWN Device Id: 5 00a075 115ba7832
Firmware Version: M0CR040
User Capacity: 525 112 713 216 bytes [525 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: < 1.8 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Jun 11 14:30:06 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0
5 Reallocated_Sector_Ct -O--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 100 100 000 - 21
12 Power_Cycle_Count -O--CK 100 100 000 - 32
171 Unknown_Attribute -O--CK 100 100 000 - 0
172 Unknown_Attribute -O--CK 100 100 000 - 0
173 Unknown_Attribute -O--CK 100 100 000 - 1
174 Unknown_Attribute -O--CK 100 100 000 - 14
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
194 Temperature_Celsius -O---K 055 045 000 - 45 (Min/Max 20/55)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
202 Unknown_SSD_Attribute ----CK 100 100 001 - 0
206 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0
246 Unknown_Attribute -O--CK 100 100 000 - 476036018
247 Unknown_Attribute -O--CK 100 100 000 - 14876144
248 Unknown_Attribute -O--CK 100 100 000 - 5007744
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 000 000 000 - 1939
210 Unknown_Attribute -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors LoggedEDIT : je viens de voir que tu avais déjà ouvert une discussion sur le forum anglais : https://ubuntuforums.org/showthread.php?t=2362760
Sans succès non plus d'après ce que je constate.
Dernière modification par malbo (Le 11/06/2017, à 15:14)
Hors ligne
#8 Le 11/06/2017, à 15:21
- ATTSSystem
Re : SSD NVMe non detecte Xiaomi Air 13
Laurent85 a écrit :
Mort je ne sais pas, le journal système crache plein d'erreurs matérielles, si ça marchait avant il faut croire que oui.
Je tiens à préciser que même lorsque qu'il n'était pas détectable par les lives, Windows pouvait démarrer (un peu) après quelques jours et il plantait pendant les analyses qui soulignaient de mauvais secteurs, mais il était "vivant" disons... Et j'ai finalement réussi à le wipe mais apparemment ça ne lui a pas plu...
Hors ligne
#9 Le 11/06/2017, à 15:30
- ??
Re : SSD NVMe non detecte Xiaomi Air 13
bonjour.
ATTSSystem a écrit :
Panne matérielle, il est mort? Il n'a que 3 mois
Donc la garantie ne devrait pas poser de problèmes.
Dernière modification par ?? (Le 11/06/2017, à 15:31)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#10 Le 11/06/2017, à 15:57
- ATTSSystem
Re : SSD NVMe non detecte Xiaomi Air 13
Plus
?? a écrit :
bonjour.
ATTSSystem a écrit :Panne matérielle, il est mort? Il n'a que 3 mois
Donc la garantie ne devrait pas poser de problèmes.
Mais c'est un ordi chinois, je vais essayer mais ça ne risque pas d'être un peu compliqué ? Et puis si ça marche ils risquent de me demander de renvoyer l'ordinateur, non?
EDIT : Acheté chez Gearbest
Dernière modification par ATTSSystem (Le 11/06/2017, à 15:58)
Hors ligne
#11 Le 11/06/2017, à 16:18
- Laurent85
Re : SSD NVMe non detecte Xiaomi Air 13
ATTSSystem a écrit :
Mais c'est un ordi chinois, je vais essayer mais ça ne risque pas d'être un peu compliqué ? Et puis si ça marche ils risquent de me demander de renvoyer l'ordinateur, non?
L'ordi est garanti, vois avec le revendeur, il faudra le renvoyer, forcément ! Par contre cette mention sur le site du revendeur me laisse dubitatif :
Note: This Android/Windows tablet is designed only to work with the current Android/Windows OS installed in it. Any alterations such as upgrades or flashing a newer version will void the warranty.
Hors ligne
#12 Le 11/06/2017, à 16:22
- ATTSSystem
Re : SSD NVMe non detecte Xiaomi Air 13
Laurent85 a écrit :
ATTSSystem a écrit :Mais c'est un ordi chinois, je vais essayer mais ça ne risque pas d'être un peu compliqué ? Et puis si ça marche ils risquent de me demander de renvoyer l'ordinateur, non?
L'ordi est garanti, vois avec le revendeur, il faudra le renvoyer, forcément ! Par contre cette mention sur le site du revendeur me laisse dubitatif :
Note: This Android/Windows tablet is designed only to work with the current Android/Windows OS installed in it. Any alterations such as upgrades or flashing a newer version will void the warranty.
Si j'enlève le second SSD et que le disque est mort je présume qu'il n'y a pas de problème pour ça, si?
Hors ligne
#13 Le 11/06/2017, à 16:31
- Laurent85
Re : SSD NVMe non detecte Xiaomi Air 13
Bah il faut le renvoyer avec les composants d'origine mais il verra que tu l'a ouvert non ? Suivant les termes de la garantie ça peut aussi bloquer là !
Hors ligne
#14 Le 11/06/2017, à 16:35
- ??
Re : SSD NVMe non detecte Xiaomi Air 13
Dans la doc du vendeur, a part dire que le SSD fait 256 Go, comme ils ne précisent pas la référence, il est certain qu'ils vont te dire que tu l'as changé.
Dernière modification par ?? (Le 11/06/2017, à 16:39)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#15 Le 11/06/2017, à 16:37
- ATTSSystem
Re : SSD NVMe non detecte Xiaomi Air 13
Donc si les chances que ma garantie fonctionne sont faibles, sans compter les frais de livraison, etc... N'y aurait il pas quelque chose que je pourrais faire en dernier recours ?
Hors ligne
#16 Le 11/06/2017, à 16:59
- Laurent85
Re : SSD NVMe non detecte Xiaomi Air 13
C'est en panne, renseigne toi s'il y a des outils de diagnostic par Xiaomi. Pose la question au revendeur sur la garantie, tu seras fixé. Tu peux aussi faire changer le composant nvme par un pro, ou laisser comme ça.
Hors ligne
Pages : 1