#101 Le 22/07/2017, à 17:56
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
Ah oui, dans mes Fichiers, Coeur Noir, pardon, je sors 
---->[]
Le résultat -->
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-81-generic (buildd@lgw01-02) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #104-Ubuntu SMP Wed Jun 14 08:17:06 UTC 2017 (Ubuntu 4.4.0-81.104-generic 4.4.67)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-81-generic.efi.signed root=UUID=0b04600c-895e-433b-9a8d-2a244f1b83b9 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dde04fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dde05000-0x00000000ddeb0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddeb1000-0x00000000ddec1fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ddec2000-0x00000000de74cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000de74d000-0x00000000deccbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000deccc000-0x00000000ded9bfff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000ded9c000-0x00000000ded9cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ded9d000-0x00000000deddffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dede0000-0x00000000df59bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df59c000-0x00000000df7f0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df7f1000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by Acer Inc.
[ 0.000000] efi: ACPI=0xddeb4000 ACPI 2.0=0xddeb4000 SMBIOS=0xdecca498
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Packard Bell imedia S2870/imedia S2870, BIOS P11-A2 01/22/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x19f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask F80000000 write-back
[ 0.000000] 2 base 180000000 mask FF0000000 write-back
[ 0.000000] 3 base 190000000 mask FF8000000 write-back
[ 0.000000] 4 base 198000000 mask FFC000000 write-back
[ 0.000000] 5 base 19C000000 mask FFE000000 write-back
[ 0.000000] 6 base 19E000000 mask FFF000000 write-back
[ 0.000000] 7 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 2GB, type WB
[ 0.000000] reg 2, base: 6GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 6400MB, range: 128MB, type WB
[ 0.000000] reg 4, base: 6528MB, range: 64MB, type WB
[ 0.000000] reg 5, base: 6592MB, range: 32MB, type WB
[ 0.000000] reg 6, base: 6624MB, range: 16MB, type WB
[ 0.000000] reg 7, base: 3584MB, range: 512MB, type UC
[ 0.000000] total RAM covered: 6128M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 2GB, type WB
[ 0.000000] reg 4, base: 6GB, range: 512MB, type WB
[ 0.000000] reg 5, base: 6640MB, range: 16MB, type UC
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x0220b000, 0x0220bfff] PGTABLE
[ 0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
[ 0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[ 0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[ 0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[ 0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3358c000-0x35abdfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000DDEB4000 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x00000000DDEB4080 00007C (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DDEBF998 00010C (v05 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DDEB4188 00B80A (v02 ACRSYS ACRPRDCT 00000022 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000DE74B080 000040
[ 0.000000] ACPI: APIC 0x00000000DDEBFAA8 000062 (v03 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DDEBFB10 000044 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x00000000DDEBFB58 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: MCFG 0x00000000DDEBFC00 00003C (v01 ACRSYS ACRPRDCT 01072009 MSFT 00000097)
[ 0.000000] ACPI: MSDM 0x00000000DDEBFC40 000055 (v03 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: HPET 0x00000000DDEBFC98 000038 (v01 ACRSYS ACRPRDCT 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DDEBFCD0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DDEC0040 000926 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000DDEC0968 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: BGRT 0x00000000DDEC1400 000038 (v00 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000019effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x19eff4000-0x19eff8fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000019effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dde04fff]
[ 0.000000] node 0: [mem 0x00000000ded9c000-0x00000000ded9cfff]
[ 0.000000] node 0: [mem 0x00000000dede0000-0x00000000df59bfff]
[ 0.000000] node 0: [mem 0x00000000df7f1000-0x00000000df7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000019effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000019effffff]
[ 0.000000] On node 0 totalpages: 1561966
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 24 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14168 pages used for memmap
[ 0.000000] DMA32 zone: 906705 pages, LIFO batch:31
[ 0.000000] Normal zone: 10176 pages used for memmap
[ 0.000000] Normal zone: 651264 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdde05000-0xddeb0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddeb1000-0xddec1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddec2000-0xde74cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xde74d000-0xdeccbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdeccc000-0xded9bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xded9d000-0xdeddffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf59c000-0xdf7f0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88019ec00000 s98264 r8192 d28712 u1048576
[ 0.000000] pcpu-alloc: s98264 r8192 d28712 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1537534
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-81-generic.efi.signed root=UUID=0b04600c-895e-433b-9a8d-2a244f1b83b9 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5975276K/6247864K available (8469K kernel code, 1294K rwdata, 3984K rodata, 1484K init, 1316K bss, 272588K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:440 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2893.347 MHz processor
[ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.69 BogoMIPS (lpj=11573388)
[ 0.000031] pid_max: default: 32768 minimum: 301
[ 0.000036] ACPI: Core revision 20150930
[ 0.005760] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.006571] Security Framework initialized
[ 0.006573] Yama: becoming mindful.
[ 0.006585] AppArmor: AppArmor initialized
[ 0.006989] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008656] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009420] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.009428] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.009607] Initializing cgroup subsys io
[ 0.009610] Initializing cgroup subsys memory
[ 0.009615] Initializing cgroup subsys devices
[ 0.009617] Initializing cgroup subsys freezer
[ 0.009619] Initializing cgroup subsys net_cls
[ 0.009621] Initializing cgroup subsys perf_event
[ 0.009623] Initializing cgroup subsys net_prio
[ 0.009625] Initializing cgroup subsys hugetlb
[ 0.009627] Initializing cgroup subsys pids
[ 0.009646] CPU: Physical Processor ID: 0
[ 0.009646] CPU: Processor Core ID: 0
[ 0.009651] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.009651] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.009654] mce: CPU supports 7 MCE banks
[ 0.009663] CPU0: Thermal monitoring enabled (TM1)
[ 0.009669] process: using mwait in idle threads
[ 0.009672] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.009673] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.010041] Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
[ 0.013193] ftrace: allocating 32129 entries in 126 pages
[ 0.025906] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.025908] smpboot: Max logical packages: 1
[ 0.026316] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.066002] TSC deadline timer enabled
[ 0.066006] smpboot: CPU0: Intel(R) Pentium(R) CPU G2020 @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.066022] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.066040] ... version: 3
[ 0.066041] ... bit width: 48
[ 0.066041] ... generic registers: 8
[ 0.066042] ... value mask: 0000ffffffffffff
[ 0.066043] ... max period: 00007fffffffffff
[ 0.066043] ... fixed-purpose events: 3
[ 0.066044] ... event mask: 00000007000000ff
[ 0.066708] x86: Booting SMP configuration:
[ 0.066709] .... node #0, CPUs: #1
[ 0.069005] x86: Booted up 1 node, 2 CPUs
[ 0.069007] smpboot: Total of 2 processors activated (11573.38 BogoMIPS)
[ 0.069036] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.070380] devtmpfs: initialized
[ 0.072392] evm: security.selinux
[ 0.072393] evm: security.SMACK64
[ 0.072394] evm: security.SMACK64EXEC
[ 0.072394] evm: security.SMACK64TRANSMUTE
[ 0.072395] evm: security.SMACK64MMAP
[ 0.072396] evm: security.ima
[ 0.072396] evm: security.capability
[ 0.072448] PM: Registering ACPI NVS region [mem 0xddec2000-0xde74cfff] (8957952 bytes)
[ 0.072529] PM: Registering ACPI NVS region [mem 0xded9d000-0xdeddffff] (274432 bytes)
[ 0.072590] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.072599] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.072664] pinctrl core: initialized pinctrl subsystem
[ 0.072766] RTC time: 14:07:05, date: 07/22/17
[ 0.072853] NET: Registered protocol family 16
[ 0.081004] cpuidle: using governor ladder
[ 0.090265] cpuidle: using governor menu
[ 0.090269] PCCT header not found.
[ 0.090362] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.090363] ACPI: bus type PCI registered
[ 0.090364] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.090425] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.090427] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.090435] PCI: Using configuration type 1 for base access
[ 0.090516] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.090521] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.102570] ACPI: Added _OSI(Module Device)
[ 0.102572] ACPI: Added _OSI(Processor Device)
[ 0.102573] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.102574] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.104658] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.106735] ACPI: Dynamic OEM Table Load:
[ 0.106741] ACPI: SSDT 0xFFFF880196C25000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.107143] ACPI: Dynamic OEM Table Load:
[ 0.107147] ACPI: SSDT 0xFFFF8801973FE800 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.107495] ACPI: Dynamic OEM Table Load:
[ 0.107497] ACPI: SSDT 0xFFFF8801973FBC00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.107905] ACPI: Interpreter enabled
[ 0.107920] ACPI: (supports S0 S3 S4 S5)
[ 0.107921] ACPI: Using IOAPIC for interrupt routing
[ 0.107940] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.113226] ACPI: Power Resource [FN00] (off)
[ 0.113290] ACPI: Power Resource [FN01] (off)
[ 0.113352] ACPI: Power Resource [FN02] (off)
[ 0.113414] ACPI: Power Resource [FN03] (off)
[ 0.113475] ACPI: Power Resource [FN04] (off)
[ 0.113860] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.113864] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.114050] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.114156] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.114157] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.114466] PCI host bridge to bus 0000:00
[ 0.114468] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.114470] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.114471] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.114472] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.114474] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.114475] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.114476] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.114477] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.114478] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.114480] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.114481] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.114482] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.114483] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.114484] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.114486] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.114487] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.114489] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.114495] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.114571] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.114598] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.114633] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.114692] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.114724] pci 0000:00:16.0: reg 0x10: [mem 0xf712b000-0xf712b00f 64bit]
[ 0.114785] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.114859] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[ 0.114885] pci 0000:00:19.0: reg 0x10: [mem 0xf7100000-0xf711ffff]
[ 0.114893] pci 0000:00:19.0: reg 0x14: [mem 0xf7129000-0xf7129fff]
[ 0.114901] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.114949] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.114986] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.115021] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.115047] pci 0000:00:1a.0: reg 0x10: [mem 0xf7128000-0xf71283ff]
[ 0.115117] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.115169] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.115207] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.115231] pci 0000:00:1b.0: reg 0x10: [mem 0xf7120000-0xf7123fff 64bit]
[ 0.115282] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.115323] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.115356] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.115383] pci 0000:00:1d.0: reg 0x10: [mem 0xf7127000-0xf71273ff]
[ 0.115453] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.115500] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.115533] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[ 0.115689] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.115712] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.115720] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.115727] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.115735] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.115742] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.115749] pci 0000:00:1f.2: reg 0x24: [mem 0xf7126000-0xf71267ff]
[ 0.115780] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.115845] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.115861] pci 0000:00:1f.3: reg 0x10: [mem 0xf7125000-0xf71250ff 64bit]
[ 0.115880] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.115988] pci 0000:01:00.0: [10de:1048] type 00 class 0x030000
[ 0.116005] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.116013] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.116021] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.116027] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.116032] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.116093] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
[ 0.116108] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.122304] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.122308] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.122312] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.122316] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.122827] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.122876] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.122923] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.122969] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.123013] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.123059] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.123104] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.123149] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.123362] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.123466] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.123468] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.123468] vgaarb: loaded
[ 0.123469] vgaarb: bridge control possible 0000:01:00.0
[ 0.123644] SCSI subsystem initialized
[ 0.123674] libata version 3.00 loaded.
[ 0.123693] ACPI: bus type USB registered
[ 0.123705] usbcore: registered new interface driver usbfs
[ 0.123711] usbcore: registered new interface driver hub
[ 0.123719] usbcore: registered new device driver usb
[ 0.123853] PCI: Using ACPI for IRQ routing
[ 0.125372] PCI: pci_cache_line_size set to 64 bytes
[ 0.125409] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.125410] e820: reserve RAM buffer [mem 0xdde05000-0xdfffffff]
[ 0.125412] e820: reserve RAM buffer [mem 0xded9d000-0xdfffffff]
[ 0.125413] e820: reserve RAM buffer [mem 0xdf59c000-0xdfffffff]
[ 0.125414] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.125415] e820: reserve RAM buffer [mem 0x19f000000-0x19fffffff]
[ 0.125509] NetLabel: Initializing
[ 0.125510] NetLabel: domain hash size = 128
[ 0.125511] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.125520] NetLabel: unlabeled traffic allowed by default
[ 0.125581] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.125585] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.127601] amd_nb: Cannot enumerate AMD northbridges
[ 0.127614] clocksource: Switched to clocksource hpet
[ 0.132405] AppArmor: AppArmor Filesystem Enabled
[ 0.132462] pnp: PnP ACPI init
[ 0.132542] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.132546] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.132618] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.132620] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.132621] system 00:01: [io 0xffff] has been reserved
[ 0.132622] system 00:01: [io 0xffff] has been reserved
[ 0.132624] system 00:01: [io 0x0400-0x0453] could not be reserved
[ 0.132625] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.132627] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.132628] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.132630] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.132651] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.132690] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.132693] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.132788] system 00:04: [io 0x0a00-0x0a1f] has been reserved
[ 0.132790] system 00:04: [io 0x0a30-0x0a3f] has been reserved
[ 0.132791] system 00:04: [io 0x0a20-0x0a2f] has been reserved
[ 0.132793] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.132933] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.132935] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.132985] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.133167] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.133169] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.133172] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.133173] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.133175] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.133176] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.133177] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.133179] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.133181] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.133182] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.133184] system 00:07: [mem 0xe0000000-0xe0000fff] has been reserved
[ 0.133186] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133311] pnp: PnP ACPI: found 8 devices
[ 0.139524] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.139536] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.139538] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.139541] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.139543] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.139547] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.139548] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.139550] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.139551] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.139552] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.139553] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.139555] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.139556] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.139557] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.139558] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.139560] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.139561] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.139562] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.139563] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.139565] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.139566] pci_bus 0000:00: resource 19 [mem 0xe0000000-0xfeafffff window]
[ 0.139567] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.139568] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.139570] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.139594] NET: Registered protocol family 2
[ 0.139723] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.139826] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.139942] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.139960] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.139981] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.140027] NET: Registered protocol family 1
[ 0.179746] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.179754] PCI: CLS 64 bytes, default 64
[ 0.179801] Unpacking initramfs...
[ 0.657268] Freeing initrd memory: 38088K (ffff88003358c000 - ffff880035abe000)
[ 0.657292] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.657294] software IO TLB [mem 0xd6139000-0xda139000] (64MB) mapped at [ffff8800d6139000-ffff8800da138fff]
[ 0.657353] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.657355] hw unit of domain pp0-core 2^-16 Joules
[ 0.657355] hw unit of domain package 2^-16 Joules
[ 0.657356] hw unit of domain pp1-gpu 2^-16 Joules
[ 0.657487] Scanning for low memory corruption every 60 seconds
[ 0.657756] audit: initializing netlink subsys (disabled)
[ 0.657769] audit: type=2000 audit(1500732425.656:1): initialized
[ 0.658118] Initialise system trusted keyring
[ 0.658211] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.659326] zbud: loaded
[ 0.659491] VFS: Disk quotas dquot_6.6.0
[ 0.659517] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.659739] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.659933] fuse init (API version 7.23)
[ 0.660034] Key type big_key registered
[ 0.660046] Allocating IMA MOK and blacklist keyrings.
[ 0.660382] Key type asymmetric registered
[ 0.660384] Asymmetric key parser 'x509' registered
[ 0.660412] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.660436] io scheduler noop registered
[ 0.660439] io scheduler deadline registered (default)
[ 0.660462] io scheduler cfq registered
[ 0.660678] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.660684] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.660715] intel_idle: MWAIT substates: 0x1120
[ 0.660716] intel_idle: v0.4.1 model 0x3A
[ 0.660717] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.660839] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.660843] ACPI: Power Button [PWRB]
[ 0.660873] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.660874] ACPI: Power Button [PWRF]
[ 0.661429] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.661430] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.661591] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.661592] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.661692] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.661693] ACPI: Thermal Zone [THRM] (30 C)
[ 0.661727] GHES: HEST is not enabled!
[ 0.661803] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.663221] Linux agpgart interface v0.103
[ 0.664275] loop: module loaded
[ 0.664424] libphy: Fixed MDIO Bus: probed
[ 0.664427] tun: Universal TUN/TAP device driver, 1.6
[ 0.664428] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.664462] PPP generic driver version 2.4.2
[ 0.664510] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.664514] ehci-pci: EHCI PCI platform driver
[ 0.664612] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.664618] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.664633] ehci-pci 0000:00:1a.0: debug port 2
[ 0.668550] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.668559] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7128000
[ 0.679643] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.679673] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.679675] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.679676] usb usb1: Product: EHCI Host Controller
[ 0.679677] usb usb1: Manufacturer: Linux 4.4.0-81-generic ehci_hcd
[ 0.679678] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.679832] hub 1-0:1.0: USB hub found
[ 0.679840] hub 1-0:1.0: 2 ports detected
[ 0.680033] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.680037] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.680050] ehci-pci 0000:00:1d.0: debug port 2
[ 0.683961] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.683969] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7127000
[ 0.695677] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.695737] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.695739] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.695740] usb usb2: Product: EHCI Host Controller
[ 0.695741] usb usb2: Manufacturer: Linux 4.4.0-81-generic ehci_hcd
[ 0.695742] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.695894] hub 2-0:1.0: USB hub found
[ 0.695900] hub 2-0:1.0: 2 ports detected
[ 0.696012] ehci-platform: EHCI generic platform driver
[ 0.696022] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.696027] ohci-pci: OHCI PCI platform driver
[ 0.696035] ohci-platform: OHCI generic platform driver
[ 0.696041] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.696087] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[ 0.696088] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 0.696599] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.696605] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.696837] mousedev: PS/2 mouse device common for all mice
[ 0.697156] rtc_cmos 00:02: RTC can wake from S4
[ 0.697314] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.697342] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.697349] i2c /dev entries driver
[ 0.697390] device-mapper: uevent: version 1.0.3
[ 0.697448] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.697465] Intel P-state driver initializing.
[ 0.697555] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.697559] EFI Variables Facility v0.08 2004-May-17
[ 0.718331] NET: Registered protocol family 10
[ 0.718468] NET: Registered protocol family 17
[ 0.718479] Key type dns_resolver registered
[ 0.718615] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x16
[ 0.718625] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x16
[ 0.718676] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.718818] registered taskstats version 1
[ 0.718832] Loading compiled-in X.509 certificates
[ 0.719562] Loaded X.509 cert 'Build time autogenerated kernel key: 4e3fcaabc4148de0b198d1fb3d36a6c6d4cf062b'
[ 0.719578] zswap: loaded using pool lzo/zbud
[ 0.721348] Key type trusted registered
[ 0.724333] Key type encrypted registered
[ 0.724339] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.724342] ima: No TPM chip found, activating TPM-bypass!
[ 0.724360] evm: HMAC attrs: 0x1
[ 0.724543] Magic number: 9:209:132
[ 0.724582] acpi device:07: hash matches
[ 0.724633] rtc_cmos 00:02: setting system clock to 2017-07-22 14:07:06 UTC (1500732426)
[ 0.724686] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.724688] EDD information not available.
[ 0.724747] PM: Hibernation image not present or could not be loaded.
[ 0.725683] Freeing unused kernel memory: 1484K (ffffffff81f45000 - ffffffff820b8000)
[ 0.725685] Write protecting the kernel read-only data: 14336k
[ 0.726082] Freeing unused kernel memory: 1760K (ffff880001848000 - ffff880001a00000)
[ 0.726317] Freeing unused kernel memory: 112K (ffff880001de4000 - ffff880001e00000)
[ 0.735074] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.735138] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.735149] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.735418] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.735456] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.735574] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.735619] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.735688] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.735731] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.735772] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.763216] pps_core: LinuxPPS API ver. 1 registered
[ 0.763218] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.764257] PTP clock support registered
[ 0.767443] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.767445] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.767600] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.778491] [drm] Initialized drm 1.1.0 20060810
[ 0.788158] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.791192] wmi: Mapper loaded
[ 0.807204] nouveau 0000:01:00.0: NVIDIA GF119 (0d9080a1)
[ 0.943733] nouveau 0000:01:00.0: bios: version 75.19.64.00.00
[ 0.946504] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[ 1.006696] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.006916] [TTM] Zone kernel: Available graphics memory: 3033870 kiB
[ 1.006918] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.006919] [TTM] Initializing pool allocator
[ 1.006923] [TTM] Initializing DMA pool allocator
[ 1.006931] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[ 1.006933] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 1.006936] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 1.006937] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 1.006939] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000
[ 1.006941] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030
[ 1.006942] nouveau 0000:01:00.0: DRM: DCB outp 02: 02011362 00020010
[ 1.006943] nouveau 0000:01:00.0: DRM: DCB outp 03: 04022310 00000000
[ 1.006945] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[ 1.006946] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
[ 1.006947] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
[ 1.007654] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.018958] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.018959] [drm] Driver supports precise vblank timestamp query.
[ 1.071975] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[ 1.073444] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 1.073446] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) ec:a8:6b:d6:e3:8c
[ 1.073448] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.073521] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 1.073542] ahci 0000:00:1f.2: version 3.0
[ 1.073739] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 1.073742] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.074300] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 1.080011] scsi host0: ahci
[ 1.080086] scsi host1: ahci
[ 1.080146] scsi host2: ahci
[ 1.080203] scsi host3: ahci
[ 1.080239] ata1: SATA max UDMA/133 abar m2048@0xf7126000 port 0xf7126100 irq 27
[ 1.080243] ata2: SATA max UDMA/133 abar m2048@0xf7126000 port 0xf7126180 irq 27
[ 1.080243] ata3: DUMMY
[ 1.080244] ata4: DUMMY
[ 1.144027] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.144029] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.144078] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.144080] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.144389] hub 1-1:1.0: USB hub found
[ 1.144413] hub 2-1:1.0: USB hub found
[ 1.144593] hub 1-1:1.0: 4 ports detected
[ 1.144598] hub 2-1:1.0: 6 ports detected
[ 1.337195] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo ffff880193c4b400
[ 1.337342] fbcon: nouveaufb (fb0) is primary device
[ 1.399694] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.402817] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.402819] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.402820] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.403085] ata2.00: ATAPI: ATAPI DVD A DH16ACSH, JA11, max UDMA/100
[ 1.403695] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.404539] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.404540] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.404542] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.404546] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.404547] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.404548] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.404834] ata2.00: configured for UDMA/100
[ 1.405377] ata1.00: ATA-9: ST2000DM001-1ER164, CC26, max UDMA/133
[ 1.405378] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.406214] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.406215] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.406216] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.407027] ata1.00: configured for UDMA/133
[ 1.407150] scsi 0:0:0:0: Direct-Access ATA ST2000DM001-1ER1 CC26 PQ: 0 ANSI: 5
[ 1.407309] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.407323] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.407325] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.407366] sd 0:0:0:0: [sda] Write Protect is off
[ 1.407367] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.407386] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.409055] scsi 1:0:0:0: CD-ROM ATAPI DVD A DH16ACSH JA11 PQ: 0 ANSI: 5
[ 1.415665] usb 2-1.3: new low-speed USB device number 3 using ehci-pci
[ 1.415674] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 1.426519] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.426520] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.426765] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.426815] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.435503] Console: switching to colour frame buffer device 240x67
[ 1.438466] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 1.447680] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 1.448763] sda: sda1 sda2 sda3 sda4
[ 1.449034] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.515523] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c328
[ 1.515528] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.515530] usb 2-1.3: Product: USB Keyboard
[ 1.515533] usb 2-1.3: Manufacturer: Logitech
[ 1.519133] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0158
[ 1.519135] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.519137] usb 1-1.3: Product: USB2.0-CRW
[ 1.519138] usb 1-1.3: Manufacturer: Generic
[ 1.519139] usb 1-1.3: SerialNumber: 20071114173400000
[ 1.520175] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.526433] usbcore: registered new interface driver usb-storage
[ 1.527558] usbcore: registered new interface driver uas
[ 1.528646] ums-realtek 1-1.3:1.0: USB Mass Storage device detected
[ 1.529325] usbcore: registered new interface driver usbhid
[ 1.529327] usbhid: USB HID core driver
[ 1.530550] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:046D:C328.0001/input/input5
[ 1.543818] scsi host4: usb-storage 1-1.3:1.0
[ 1.543891] usbcore: registered new interface driver ums-realtek
[ 1.583903] hid-generic 0003:046D:C328.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.3/input0
[ 1.585853] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:046D:C328.0002/input/input6
[ 1.640074] hid-generic 0003:046D:C328.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.3/input1
[ 1.655686] tsc: Refined TSC clocksource calibration: 2893.427 MHz
[ 1.655691] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b502105a9, max_idle_ns: 440795323709 ns
[ 1.693877] usb 1-1.3: USB disconnect, device number 3
[ 2.048925] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 2.288245] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.655864] clocksource: Switched to clocksource tsc
[ 3.254646] random: nonblocking pool is initialized
[ 3.292264] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 3.292354] systemd[1]: Detected architecture x86-64.
[ 3.296684] systemd[1]: Set hostname to <pimprenelle-imedia-S2870>.
[ 4.573180] systemd[1]: Listening on Journal Socket.
[ 4.573257] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[ 4.573283] systemd[1]: Listening on udev Kernel Socket.
[ 4.573314] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.573343] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.573399] systemd[1]: Listening on Journal Audit Socket.
[ 4.573421] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.573464] systemd[1]: Created slice User and Session Slice.
[ 4.573473] systemd[1]: Reached target Encrypted Volumes.
[ 4.573483] systemd[1]: Reached target User and Group Name Lookups.
[ 4.573508] systemd[1]: Created slice System Slice.
[ 4.611902] systemd[1]: Starting Load Kernel Modules...
[ 4.612222] systemd[1]: Mounting Debug File System...
[ 4.612532] systemd[1]: Starting Uncomplicated firewall...
[ 4.612856] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.613178] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.613484] systemd[1]: Started Read required files in advance.
[ 4.614661] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 4.614980] systemd[1]: Started Braille Device Support.
[ 4.615333] systemd[1]: Starting Set console keymap...
[ 4.615652] systemd[1]: Mounting Huge Pages File System...
[ 4.615677] systemd[1]: Reached target Slices.
[ 4.615731] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.615776] systemd[1]: Listening on Syslog Socket.
[ 4.616089] systemd[1]: Starting Journal Service...
[ 4.616233] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.616646] systemd[1]: Reached target Remote File Systems (Pre).
[ 4.616658] systemd[1]: Reached target Remote File Systems.
[ 4.616953] systemd[1]: Starting Nameserver information manager...
[ 4.617004] systemd[1]: Listening on udev Control Socket.
[ 4.799119] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 4.812170] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 4.875440] systemd[1]: Started Uncomplicated firewall.
[ 4.951969] systemd[1]: Mounted Debug File System.
[ 4.952372] systemd[1]: Mounted Huge Pages File System.
[ 4.952423] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.019902] systemd[1]: Started Nameserver information manager.
[ 5.021072] systemd[1]: Reached target Network (Pre).
[ 5.269761] systemd[1]: Started Journal Service.
[ 5.271155] lp: driver loaded but no devices found
[ 5.304049] ppdev: user-space parallel port driver
[ 5.625069] it87: Found IT8728F chip at 0xa30, revision 0
[ 6.875466] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 6.932928] systemd-journald[264]: Received request to flush runtime journal from PID 1
[ 7.180669] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[ 7.180674] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.180680] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 7.180683] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.180684] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 7.180686] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.180687] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 7.180689] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.180689] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.214871] EDAC MC: Ver: 3.0.0
[ 7.471691] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.850909] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 7.851105] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 7.851136] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 7.851140] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 7.886732] snd_hda_codec_realtek hdaudioC0D0: ALC662 rev1: SKU not ready 0x411111f0
[ 7.887065] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 7.887067] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.887068] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 7.887069] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 7.887070] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 7.887072] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 7.887074] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 7.887075] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 7.896152] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.896198] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.896238] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.896277] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.896316] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.063269] intel_rapl: Found RAPL domain package
[ 8.063271] intel_rapl: Found RAPL domain core
[ 8.063275] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 8.220245] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 8.220293] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 11.544151] Adding 4095996k swap on /dev/sda4. Priority:-1 extents:1 across:4095996k FS
[ 11.550735] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 12.945461] audit: type=1400 audit(1500732438.715:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=643 comm="apparmor_parser"
[ 12.945468] audit: type=1400 audit(1500732438.715:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=643 comm="apparmor_parser"
[ 12.945472] audit: type=1400 audit(1500732438.715:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=643 comm="apparmor_parser"
[ 12.945477] audit: type=1400 audit(1500732438.715:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=643 comm="apparmor_parser"
[ 12.974641] audit: type=1400 audit(1500732438.743:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=646 comm="apparmor_parser"
[ 12.974648] audit: type=1400 audit(1500732438.743:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=646 comm="apparmor_parser"
[ 13.054898] audit: type=1400 audit(1500732438.823:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=647 comm="apparmor_parser"
[ 13.054905] audit: type=1400 audit(1500732438.823:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=647 comm="apparmor_parser"
[ 13.054909] audit: type=1400 audit(1500732438.823:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=647 comm="apparmor_parser"
[ 13.054913] audit: type=1400 audit(1500732438.823:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=647 comm="apparmor_parser"
[ 21.749714] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 22.004486] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 23.124326] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 23.718372] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 23.718378] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
[ 23.718414] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes readyHors ligne
#102 Le 22/07/2017, à 18:01
- nam1962
Re : [Abandonné] Lenteur extrême partout
En as-tu profité pour passer les commandes qui suppriment le pilote nVidia auquel ta carte semble allergique ?
[ Modéré ]
Hors ligne
#103 Le 22/07/2017, à 18:04
- Pimprelune
Hors ligne
#104 Le 22/07/2017, à 18:11
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
Coeur Noir a écrit :
Sous 16.04 on vient de passer au noyau 4.10 il me semble, est-ce que ça peut avoir un rapport ?
L'affichage moche de l'écran de boot, c'est souvent dû à la présence de nvidia, il y a juste une petite option à changer dans le fichier grub.
Tu es sous Ubuntu saveur Gnome c'est ça, installé dès le départ, ou après coup en plus d'un autre environnement ? Quel y est le gestionnaire de session par défaut, Lightdm ou GDM ?
Pour revenir sur les questions posées, Coeur Noir, Gnome installé dès le départ, pas d'autre environnement, gestionnaire GDM.
Hors ligne
#105 Le 22/07/2017, à 18:16
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
nam1962 a écrit :
En as-tu profité pour passer les commandes qui suppriment le pilote nVidia auquel ta carte semble allergique ?
Même si j'ai changé/je suis retournée à un ancien noyau, ça vaut le coup, nam1962 ? Et ça risque pas de faire "un vide" quelque part, dans ma présentation (au hasard 
) ou ailleurs (perte du clic, non-réponse aux demandes, etc) ?
Hors ligne
#106 Le 22/07/2017, à 18:17
- Coeur Noir
Re : [Abandonné] Lenteur extrême partout
Parce que
> dans une commande
dmesg > nom_fichierdit qu'on envoie la sortie vers un fichier nommé nom_fichier.
Et je ne vois rien de bizarre dans ton dmesg, il est lent là ton ordi quand tu lances ce dmesg ?
Dans le mien y a plus d'erreurs et de warnings sans que ça empêche mon ordi de tourner gentiment…
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#107 Le 22/07/2017, à 18:20
- Coeur Noir
Re : [Abandonné] Lenteur extrême partout
Bon. et que dit la commande
topquand ton ordi est lent ? Y-a-t-il un processus qui prend un grand %age de cpu ou de mémoire ?
Tu peux voir ça aussi via l'appli moniteur système.
Dernière modification par Coeur Noir (Le 22/07/2017, à 18:21)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#108 Le 22/07/2017, à 18:28
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
Lent ? Non pas du tout, Coeur Noir, mais j'ai appelé le Gestionnaire de MAJ (pour voir les pilotes) et la fenêtre m'affiche ça --> 
Avec le dernier noyau (4.4.1-83), il n'y avait rien dans les pilotes, me semble-t-il (!?!)...
Cela peut-il répondre - en partie - à ta question, nam1962 (suppression) ?
Dernière modification par Pimprelune (Le 22/07/2017, à 19:06)
Hors ligne
#109 Le 22/07/2017, à 18:35
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
Réponse, Coeur Noir -->
top - 18:31:45 up 2:24, 1 user, load average: 2,84, 2,77, 2,47
Tâches: 183 total, 1 en cours, 182 en veille, 0 arrêté, 0 zombie
%Cpu(s): 5,8 ut, 1,9 sy, 0,0 ni, 14,7 id, 77,7 wa, 0,0 hi, 0,0 si, 0,0 st
KiB Mem : 6067740 total, 123312 libr, 2336096 util, 3608332 tamp/cache
KiB Éch: 4095996 total, 4095996 libr, 0 util. 3325680 dispo Mem
PID UTIL. PR NI VIRT RES SHR S %CPU %MEM TEMPS+ COM.
1728 pimpren+ 20 0 3126788 743408 92500 S 5,8 12,3 16:57.14 firefox
1088 pimpren+ 20 0 361260 93016 62608 S 2,2 1,5 3:32.41 Xorg
4741 pimpren+ 20 0 716236 126392 74668 S 2,2 2,1 0:37.59 update-man+
1312 pimpren+ 20 0 2040136 180776 41064 S 1,9 3,0 7:53.09 gnome-shell
1423 pimpren+ 20 0 492844 83664 2552 S 1,0 1,4 2:33.65 tracker-st+
4730 pimpren+ 20 0 844788 36136 21472 S 1,0 0,6 0:19.70 gnome-docu+
4935 pimpren+ 20 0 676580 37876 28984 D 0,7 0,6 0:01.18 gnome-term+
2816 pimpren+ 20 0 743420 15836 5680 S 0,5 0,3 0:30.64 psensor
3466 pimpren+ 20 0 2786048 136580 6568 S 0,5 2,3 0:35.61 calibre
4895 root 20 0 0 0 0 S 0,5 0,0 0:02.51 kworker/1:1
901 root 20 0 295792 12632 788 S 0,2 0,2 0:01.55 fail2ban-s+
1292 pimpren+ 20 0 349808 8096 3676 S 0,2 0,1 0:00.08 gsd-locate+
5616 pimpren+ 20 0 45216 3724 3088 R 0,2 0,1 0:00.01 top
1 root 20 0 121892 4284 2260 S 0,0 0,1 0:01.11 systemd
2 root 20 0 0 0 0 S 0,0 0,0 0:00.00 kthreadd
3 root 20 0 0 0 0 S 0,0 0,0 0:00.23 ksoftirqd/0
5 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 kworker/0:+ Mais il n'y avait déjà rien dans le message #22, le retour à un ancien noyau peut déceler un "bug" récurrent ?
Dernière modification par Pimprelune (Le 22/07/2017, à 18:35)
Hors ligne
#110 Le 22/07/2017, à 18:42
- nam1962
Re : [Abandonné] Lenteur extrême partout
Ah, là on a un choix qui peut nous éviter la suppression ! (il n'y aura qu'à trouver le pilote qui rend ta carte heureuse)
Si j'ai bien compris, pour le moment, depuis l'installation du pilote nVidia, tu ne peux avoir de session opérationnelle qu'en recovery ?
Si c'est effectivement le cas, coche la 4eme ligne et ça remettra le pilote "nouveau". Redémarre et dis nous si tu tournes bien sur une session normale. (A ce moment, on verra si ça vaut le coup de tester les autres versions nvidia)
Par ailleurs, je vois que le microdode n'est pas utilisé (section "inconnu") Pour moi tu devrais l'utiliser : en principe ça améliore la prise en compte du processeur (et c'est réversible si on avait pas satisfaction)
[ Modéré ]
Hors ligne
#111 Le 22/07/2017, à 18:59
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
nam1962 a écrit :
Ah, là on a un choix qui peut nous éviter la suppression ! (il n'y aura qu'à trouver le pilote qui rend ta carte heureuse)
Si j'ai bien compris, pour le moment, depuis l'installation du pilote nVidia, tu ne peux avoir de session opérationnelle qu'en recovery ?Si c'est effectivement le cas, coche la 4eme ligne et ça remettra le pilote "nouveau". Redémarre et dis nous si tu tournes bien sur une session normale. (A ce moment, on verra si ça vaut le coup de tester les autres versions nvidia)
Par ailleurs, je vois que le microdode n'est pas utilisé (section "inconnu") Pour moi tu devrais l'utiliser : en principe ça améliore la prise en compte du processeur (et c'est réversible si on avait pas satisfaction)
Non, nam1962, je n'ai pas eu le temps de passer en recovery, juste en liveUsb (dont je savais déjà que ça marchait pour la BBox et ses téléchargements), et le collègue m'a fait démarrer sur le précédent noyau (Grub, comment choisit-on le précédent non-recovery ? Aïe, la cervelle), ce qui implique - à chaque connexion - de passer choisir la version du noyau pour avoir l'affichage qui marche.
Je ne risque pas de me retrouver encore en rade "d'actions" (souris inopérante, affichage figé, aucune action possible) si je coche et Redémarre, nam1962 ?
Hors ligne
#112 Le 22/07/2017, à 19:17
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
Mais j'ai trouvé ce sujet qui parle justement du microcode en question, nam1962 !
Un rapport (lointain) avec mon problème (message #2), semblerait-il.
Hors ligne
#113 Le 22/07/2017, à 19:47
- nam1962
Re : [Abandonné] Lenteur extrême partout
C'est justement pourquoi je te propose de repasser sur nouveau : on verra si le démarrage sur le dernier noyau fonctionne ou pas (à ce stade il ne fonctionne pas, donc rien à perdre !
Pour le microcode, je le mets systématiquement dans toutes mes installs et tous mes tutos (pour ceux qui sont sous intel, bien sûr).
[ Modéré ]
Hors ligne
#114 Le 22/07/2017, à 19:47
- Coeur Noir
Re : [Abandonné] Lenteur extrême partout
top et dmesg sont à lancer quand l'ordi se met à ramer : pour éventuellement voir ce qui est en train de poser problème.
Si tu les lances quand ça va bien, bah ils nous diront juste que tout va bien ;-)
Microcode, skylake, etc… → je n'arrive pas bien à trouver les specs de ton ordi imedia-S2870 de chez packardpoubell mais ça m'étonnerait qu'il soit si récent ?
Microcode, à tenter mais quelqu'un sait-il exactement ce qu'il fait, ce microcode Intel ?
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#115 Le 22/07/2017, à 20:02
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
Mouiiiii, nam1962, je n'en suis plus à ça près, mais comme Coeur Noir le dit, la PackardBell, pour en trouver les spécifications, c'est la croix et la bannière, alors je me demandais aussi ce que des pilotes Intel pouvaient faire sur mon matos.
Quand je l'ai acheté (CNAF n'est plus dutout mon ami), il y a 7 ans, je pense que c'était déjà du quasi rebut sur les présentoirs, et partout où je l'ai cherché (sur le Net), c'est un produit qui ne se fait plus.
D'ailleurs, pour ce qui concerne le matériel, si la carte graphique est aussi chère, c'est car il s'agit d'un modèle Slim (l'intérieur genre boîte de sardines, avec composants à touche-touche, et ports spéciaux) puisque c'est une mini Tour, loin des formats standards.
Hors ligne
#116 Le 22/07/2017, à 20:07
Hors ligne
#117 Le 22/07/2017, à 20:11
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
nam1962 a écrit :
C'est justement pourquoi je te propose de repasser sur nouveau : on verra si le démarrage sur le dernier noyau fonctionne ou pas (à ce stade il ne fonctionne pas, donc rien à perdre !
Pour le microcode, je le mets systématiquement dans toutes mes installs et tous mes tutos (pour ceux qui sont sous intel, bien sûr).
Donc - concrètement - je coche et décoche quoi, nam1962 ?
Hors ligne
#118 Le 22/07/2017, à 20:51
- nam1962
Re : [Abandonné] Lenteur extrême partout
Ben, comme dit au #110 tu coches nouveau et tu coches microcode et tu redémarres et nous dit quoi
[ Modéré ]
Hors ligne
#119 Le 22/07/2017, à 21:09
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
Je coche un dans la partie haute (le 4ème) et un dans la partie basse (le premier), capture du message #108, nam1962 ? Il ne va pas y avoir conflit ?
Je fais ça --> 
en cochant Appliquer, et je Redémarre (en croisant très fort les doigts !) ?
J'en suis toujours à la chasse aux références (drivers et autres ?) pour mon PC, et je viens de trouver ça --> du bon modèle.
Dernière modification par Pimprelune (Le 22/07/2017, à 21:12)
Hors ligne
#120 Le 22/07/2017, à 21:17
- nam1962
Re : [Abandonné] Lenteur extrême partout
Exactement çà et croises les doigts comme moi
....pour ton PC, je ne vois toujours pas ce qu'il a d'exotique ! https://www.youtube.com/watch?v=Dcc0nhHJTdA
Dernière modification par nam1962 (Le 22/07/2017, à 21:18)
[ Modéré ]
Hors ligne
#121 Le 22/07/2017, à 21:23
Hors ligne
#122 Le 22/07/2017, à 21:45
- nam1962
Re : [Abandonné] Lenteur extrême partout
Euhh.. non, pourquoi ?
[ Modéré ]
Hors ligne
#123 Le 22/07/2017, à 21:57
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
Je ne sais pas, je confonds avec le Fichier Gedit que j'ai modifié, nam1962.
Alors croisons les doigts pour que ça "s'applique" comme il faut, je n'ai plus les yeux en face des trous, ce soir...
Hors ligne
#125 Le 22/07/2017, à 22:34
- Bougron
Re : [Abandonné] Lenteur extrême partout
Bonsoir
Lorsque cela se met à ne plus du tout à ne bien fonctionner, prends le temps qu'il faut pour faire un rapport bisnext ( ma signature ) .
Peut-être qu'une idée nouvelle sera détectée!
Dernière modification par Bougron (Le 27/07/2017, à 13:20)
Hors ligne