#1 Le 30/11/2018, à 21:10
- SupRshinoa
Ports USB non fonctionnels sur portable Toshiba L670-11F
Bonjour à tous,
Je suis nouveau ici et débutant sur l'environnement Ubuntu. Je sollicite votre aide vis à vis d'un problème que j'ai sur un portable que l'on m'a passé pour un dépannage informatique.
Voici le topo :
Le PC est un Toshiba Satellite Pro L670-11F qui avait initialement un environnement Windows 10. On m'a passé ce portable pour que j'aide à le remettre en état car il était tellement vérolé qu'il fallait 2 heures pour atteindre le bureau Windows et ne pouvoir quasiment rien faire. A ce moment là, les ports USB ne fonctionnaient pas du tout. Cependant, la propriétaire du portable m'a affirmé qu'ils fonctionnaient avant son gros problème informatique.
Face à cette situation, j'ai fait le choix de télécharger puis installer (par image de DVD) la version de Xubuntu 18-04 32 bits. L'installation a magnifiquement bien marché, rendant le PC de nouveau opérationnel. Cependant, les ports USB 2.0 restent toujours non fonctionnels. Il n'est pas improbable que ce soit les précédents problèmes qui aient par exemple désactivés ces ports.
Je précise que le PC possède 2 ports USB 2.0 (sur la droite du pc) et 1 port e-SATA / HDMI / Lecteur de carte SD (sur la gauche). Ce sont les 2 ports sur la droite qui ne répondent pas lorsque je mets un support usb. Pas d'alimentation électrique des clefs usb (ou disque dur externe), pas de reconnaissance ni montage du média.
J'ai écumé les forums depuis 2 à 3 jours sans trouver de solutions à mon problème.
Voici ce que j'ai déjà essayé :
Regarder si les ports USB pouvaient être activés / désactivés dans le BIOS et je n'ai pas trouvé de ligne où réaliser cela
Eteindre le PC, enlever la batterie et vider l'alimentation électrique
Vu sur un forum pour un problème d'usb également, éditer le grub avec la commande
sudo -H gedit /etc/default/grub
puis modifier la ligne suivante avec
GRUB_CMDLINE_LINUX=”acpi=force irqpoll”
Tout cela n'a pas fonctionné et je continue donc à chercher le moyen de réactiver ces 2 ports.
Ci dessous je vous ajoute le résultat de la commande lsusb au cas où cela puisse aider:
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 04f2:b1d6 Chicony Electronics Co., Ltd CNF9055 Toshiba Webcam
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Edit : Peut être que cela peut aider également :
sudo lshw -c bus
*-core
description: Carte mère
produit: NALAA
fabriquant: TOSHIBA
identifiant matériel: 0
version: 1.00
numéro de série: 123456789AB
emplacement: Part Component
*-usb:0
description: USB controller
produit: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
fabriquant: Intel Corporation
identifiant matériel: 1a
information bus: pci@0000:00:1a.0
version: 05
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
ressources: irq:16 mémoire:92608000-926083ff
*-usbhost
produit: EHCI Host Controller
fabriquant: Linux 4.15.0-39-generic ehci_hcd
identifiant matériel: 1
information bus: usb@1
nom logique: usb1
version: 4.15
fonctionnalités: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usb
description: Concentrateur USB
produit: Integrated Rate Matching Hub
fabriquant: Intel Corp.
identifiant matériel: 1
information bus: usb@1:1
version: 0.00
fonctionnalités: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-usb:1
description: USB controller
produit: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
fabriquant: Intel Corporation
identifiant matériel: 1d
information bus: pci@0000:00:1d.0
version: 05
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
ressources: irq:23 mémoire:92607000-926073ff
*-usbhost
produit: EHCI Host Controller
fabriquant: Linux 4.15.0-39-generic ehci_hcd
identifiant matériel: 1
information bus: usb@2
nom logique: usb2
version: 4.15
fonctionnalités: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usb
description: Concentrateur USB
produit: Integrated Rate Matching Hub
fabriquant: Intel Corp.
identifiant matériel: 1
information bus: usb@2:1
version: 0.00
fonctionnalités: usb-2.00
configuration: driver=hub slots=8 speed=480Mbit/s
*-serial
description: SMBus
produit: 5 Series/3400 Series Chipset SMBus Controller
fabriquant: Intel Corporation
identifiant matériel: 1f.3
information bus: pci@0000:00:1f.3
version: 05
bits: 64 bits
horloge: 33MHz
configuration: driver=i801_smbus latency=0
ressources: irq:18 mémoire:92604000-926040ff portE/S:efa0(taille=32)
Merci de vos réponses !
Dernière modification par SupRshinoa (Le 30/11/2018, à 21:19)
Hors ligne
#2 Le 30/11/2018, à 23:51
- ares
Re : Ports USB non fonctionnels sur portable Toshiba L670-11F
Salut,
Cependant, la propriétaire du portable m'a affirmé qu'ils fonctionnaient avant son gros problème informatique.
... Et windows fonctionnait super bien ! <pub> Ça c'était avant ! </pub>
Que renvoi :
dmesg | grep usb
@+
Le droit d'emmerder Dieu BNF
Hors ligne
#3 Le 01/12/2018, à 01:14
- moko138
Re : Ports USB non fonctionnels sur portable Toshiba L670-11F
dmesg | grep -i usb
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#4 Le 01/12/2018, à 09:10
- SupRshinoa
Re : Ports USB non fonctionnels sur portable Toshiba L670-11F
Voici le résultat de la commande citée ci dessus
dmesg|grep -i usb
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-39-generic root=UUID=cc78eac4-d68e-48ce-9fbe-a85d93ef35de ro acpi=force irqpoll quiet splash usbcore.autosuspend=-1 vt.handoff=1
[ 0.157958] ACPI: bus type USB registered
[ 0.157958] usbcore: registered new interface driver usbfs
[ 0.157958] usbcore: registered new interface driver hub
[ 0.157958] usbcore: registered new device driver usb
[ 1.737770] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.738020] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.756037] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.756103] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.756106] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.756108] usb usb1: Product: EHCI Host Controller
[ 1.756111] usb usb1: Manufacturer: Linux 4.15.0-39-generic ehci_hcd
[ 1.756113] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.756335] hub 1-0:1.0: USB hub found
[ 1.756704] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.776035] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.776083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.776086] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.776088] usb usb2: Product: EHCI Host Controller
[ 1.776090] usb usb2: Manufacturer: Linux 4.15.0-39-generic ehci_hcd
[ 1.776092] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.776306] hub 2-0:1.0: USB hub found
[ 1.776487] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.776518] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.096034] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.120035] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.252454] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.252457] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.252722] hub 1-1:1.0: USB hub found
[ 2.276599] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.276605] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.277126] hub 2-1:1.0: USB hub found
[ 2.540041] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 2.660727] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0138
[ 2.660730] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.660733] usb 1-1.3: Product: USB2.0-CRW
[ 2.660735] usb 1-1.3: Manufacturer: Generic
[ 2.660738] usb 1-1.3: SerialNumber: 20090516388200000
[ 2.676496] usbcore: registered new interface driver usb-storage
[ 2.682347] usbcore: registered new interface driver uas
[ 2.689715] ums-realtek 1-1.3:1.0: USB Mass Storage device detected
[ 2.709037] scsi host6: usb-storage 1-1.3:1.0
[ 2.709131] usbcore: registered new interface driver ums-realtek
[ 2.744011] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[ 2.880998] usb 1-1.4: New USB device found, idVendor=04f2, idProduct=b1d6
[ 2.881003] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.881007] usb 1-1.4: Product: CNF9055
[ 2.881011] usb 1-1.4: Manufacturer: Sonix Technology Co., Ltd.
[ 2.887317] usb 1-1.3: USB disconnect, device number 3
[ 24.110917] input: CNF9055: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8
[ 24.114718] usbcore: registered new interface driver uvcvideo
[ 24.114720] USB Video Class driver (1.1.1)
Hors ligne
#5 Le 01/12/2018, à 14:10
- ares
Re : Ports USB non fonctionnels sur portable Toshiba L670-11F
Salut,
[ 1.756335] hub 1-0:1.0: USB hub found
Je suis pas spécialiste, mais il me semble que ton USB est bloqué/verrouillé depuis ou après le Boot !
Sauf erreur, il faut modifier GRUB mais pas de la façon que tu nous as indiqué.
J'ai trouvé CA pour Ubuntu 14.04
Tu avais trouvé un début de piste de solution...
Bonne chance, @+
Le droit d'emmerder Dieu BNF
Hors ligne
#6 Le 01/12/2018, à 17:32
- SupRshinoa
Re : Ports USB non fonctionnels sur portable Toshiba L670-11F
Malheureusement, j'ai déjà essayé cette manip également, Ares.
En l'occurence, j'ai essayé :
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash usbcore.autosuspend=-1"
Puis également la variante décrite sur un autre site:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash usbcore.autosuspend_delay_ms=-1"
... mais cela ne fonctionne pas pour le problème que j'ai sur ce PC.
Autre piste : J'ai lancé une commande lsusb -v qui donne beaucoup d'infos. Je m'étonne de voir qu'un paramètre MaxPower est à 0mA. Est ce que cela pourrait expliquer que les ports ne soient pas alimentés ?
Je vous mets le résultat de la commande complète ci dessous. On voit notamment que la Webcam possède un MaxPower 500mA et doit donc être fonctionnelle. :
lsusb -v
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x8087 Intel Corp.
idProduct 0x0020 Integrated Rate Matching Hub
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 12
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 4.15
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Bus 001 Device 003: ID 04f2:b1d6 Chicony Electronics Co., Ltd CNF9055 Toshiba Webcam
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x04f2 Chicony Electronics Co., Ltd
idProduct 0xb1d6 CNF9055 Toshiba Webcam
bcdDevice 26.13
iManufacturer 2
iProduct 1
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 483
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 14 Video
bFunctionSubClass 3 Video Interface Collection
bFunctionProtocol 0
iFunction 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 1 Video Control
bInterfaceProtocol 0
iInterface 5
VideoControl Interface Descriptor:
bLength 13
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdUVC 1.00
wTotalLength 77
dwClockFrequency 15.000000MHz
bInCollection 1
baInterfaceNr( 0) 1
VideoControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 2
wTerminalType 0x0101 USB Streaming
bAssocTerminal 0
bSourceID 4
iTerminal 0
VideoControl Interface Descriptor:
bLength 26
bDescriptorType 36
bDescriptorSubtype 6 (EXTENSION_UNIT)
bUnitID 4
guidExtensionCode {7033f028-1163-2e4a-ba2c-6890eb334016}
bNumControl 8
bNrPins 1
baSourceID( 0) 3
bControlSize 1
bmControls( 0) 0x0f
iExtension 0
VideoControl Interface Descriptor:
bLength 18
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 1
wTerminalType 0x0201 Camera Sensor
bAssocTerminal 0
iTerminal 0
wObjectiveFocalLengthMin 0
wObjectiveFocalLengthMax 0
wOcularFocalLength 0
bControlSize 3
bmControls 0x00000004
Auto-Exposure Priority
VideoControl Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 5 (PROCESSING_UNIT)
Warning: Descriptor too short
bUnitID 3
bSourceID 1
wMaxMultiplier 0
bControlSize 2
bmControls 0x0000177f
Brightness
Contrast
Hue
Saturation
Sharpness
Gamma
White Balance Temperature
Backlight Compensation
Gain
Power Line Frequency
White Balance Temperature, Auto
iProcessing 0
bmVideoStandards 0x20
PAL - 525/60
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 6
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 5
VideoStreaming Interface Descriptor:
bLength 14
bDescriptorType 36
bDescriptorSubtype 1 (INPUT_HEADER)
bNumFormats 1
wTotalLength 263
bEndPointAddress 129
bmInfo 0
bTerminalLink 2
bStillCaptureMethod 2
bTriggerSupport 0
bTriggerUsage 0
bControlSize 1
bmaControls( 0) 27
VideoStreaming Interface Descriptor:
bLength 27
bDescriptorType 36
bDescriptorSubtype 4 (FORMAT_UNCOMPRESSED)
bFormatIndex 1
bNumFrameDescriptors 5
guidFormat {59555932-0000-1000-8000-00aa00389b71}
bBitsPerPixel 16
bDefaultFrameIndex 1
bAspectRatioX 0
bAspectRatioY 0
bmInterlaceFlags 0x00
Interlaced stream or variable: No
Fields per frame: 2 fields
Field 1 first: No
Field pattern: Field 1 only
bCopyProtect 0
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 1
bmCapabilities 0x00
Still image unsupported
wWidth 640
wHeight 480
dwMinBitRate 49152000
dwMaxBitRate 147456000
dwMaxVideoFrameBufferSize 614400
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 500000
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 2
bmCapabilities 0x00
Still image unsupported
wWidth 352
wHeight 288
dwMinBitRate 16220160
dwMaxBitRate 48660480
dwMaxVideoFrameBufferSize 202752
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 500000
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 3
bmCapabilities 0x00
Still image unsupported
wWidth 320
wHeight 240
dwMinBitRate 12288000
dwMaxBitRate 36864000
dwMaxVideoFrameBufferSize 153600
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 500000
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 4
bmCapabilities 0x00
Still image unsupported
wWidth 176
wHeight 144
dwMinBitRate 4055040
dwMaxBitRate 12165120
dwMaxVideoFrameBufferSize 50688
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 500000
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 5
bmCapabilities 0x00
Still image unsupported
wWidth 160
wHeight 120
dwMinBitRate 3072000
dwMaxBitRate 9216000
dwMaxVideoFrameBufferSize 38400
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 500000
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 26
bDescriptorType 36
bDescriptorSubtype 3 (STILL_IMAGE_FRAME)
bEndpointAddress 0
bNumImageSizePatterns 5
wWidth( 0) 640
wHeight( 0) 480
wWidth( 1) 352
wHeight( 1) 288
wWidth( 2) 320
wHeight( 2) 240
wWidth( 3) 176
wHeight( 3) 144
wWidth( 4) 160
wHeight( 4) 120
bNumCompressionPatterns 5
VideoStreaming Interface Descriptor:
bLength 6
bDescriptorType 36
bDescriptorSubtype 13 (COLORFORMAT)
bColorPrimaries 1 (BT.709,sRGB)
bTransferCharacteristics 1 (BT.709)
bMatrixCoefficients 4 (SMPTE 170M (BT.601))
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0080 1x 128 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0100 1x 256 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0320 1x 800 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0b20 2x 800 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1320 3x 800 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 6
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x8087 Intel Corp.
idProduct 0x0020 Integrated Rate Matching Hub
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 4.15
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hors ligne
#7 Le 01/12/2018, à 18:48
- ares
Re : Ports USB non fonctionnels sur portable Toshiba L670-11F
Salut,
Après recherche, il existe le logiciel Intel powertop.
Installation classique :
sudo apt install powertop
et
sudo powertop
Lire la Doc Intel
@+
Le droit d'emmerder Dieu BNF
Hors ligne
#8 Le 02/12/2018, à 10:31
- SupRshinoa
Re : Ports USB non fonctionnels sur portable Toshiba L670-11F
J'ai installé hier cette application Powertop.
De ce que je comprends, cela permet d'optimiser la consommation d'énergie d'un PC concernant l'écran et les périphériques notamment.
Je n'ai pas vraiment abouti à rendre les ports USB de nouveau fonctionnels ...
Hors ligne
#9 Le 02/12/2018, à 10:56
- ares
Re : Ports USB non fonctionnels sur portable Toshiba L670-11F
Salut,
Autre piste : J'ai lancé une commande lsusb -v qui donne beaucoup d'infos. Je m'étonne de voir qu'un paramètre MaxPower est à 0mA. Est ce que cela pourrait expliquer que les ports ne soient pas alimentés ?
Mois aussi j'ai la valeur "MaxPower à 0mA" !
lsusb -v | grep MaxPower
Couldn't open device, some information will be missing
MaxPower 0mA
MaxPower 0mA
Couldn't open device, some information will be missing
MaxPower 256mA
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
MaxPower 0mA
Couldn't open device, some information will be missing
MaxPower 0mA
MaxPower 0mA
MaxPower 0mA
Et quand je branche un scanner :
lsusb -v | grep MaxPower
Couldn't open device, some information will be missing
MaxPower 0mA
MaxPower 0mA
Couldn't open device, some information will be missing
MaxPower 256mA
MaxPower 500mA
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
MaxPower 0mA
MaxPower 0mA
MaxPower 0mA
MaxPower 0mA
Ce qui est normal...
Désolé, j'ai pas d'autre solution sauf à vérifier si il existe une version plus récente du BIOS.
Bonne chance, @+
Le droit d'emmerder Dieu BNF
Hors ligne
#10 Le 02/12/2018, à 11:21
- Nuliel
Re : Ports USB non fonctionnels sur portable Toshiba L670-11F
Tu peux donner
dpkg -l | grep tlp
et aller voir dans le bios les différentes options proposées
Hors ligne
#11 Le 02/12/2018, à 19:42
- SupRshinoa
Re : Ports USB non fonctionnels sur portable Toshiba L670-11F
Tu peux donner
dpkg -l | grep tlp
et aller voir dans le bios les différentes options proposées
Bonjour Naziel, la commande que tu proposes ne me renvoie rien. Je n'ai pas cette application tlp installée sur ce pc.
Au vu de vos réponses, je commence à me poser plusieurs questions, auxquelles vous pourrez peut être apporter vos impressions :
Est ce possible que les 2 ports USB 2.0 soient simplement HS ? Si c'était le cas, est ce qu'il serait possible de le détecter par certaines commandes ?
Est ce que cela vaudrait le coup de démonter le PC et essayer de débrancher / rebrancher la connexion avec la carte mère ? Jusqu'à présent, je voulais essayer d'éviter de le faire car je ne suis pas très sûr de mon coup ...
Vis à vis du BIOS, à mon sens, je n'ai pas vu d'option permettant de mettre : USB "enabled". Je me souviens d'avoir une option PCI LAN "enabled". Est ce que vous me conseillez de regarder d'autres mots clés en particulier ?
Je ne sais pas aujourd'hui comment mettre à jour le BIOS de ce PC et surtout si cela est risqué en étant sur un OS indépendant. Je viens de regarder sur le site de Toshiba : j'ai rentré le serial du PC et cela m'a permis de récuperer un fichier BIOS_V230_WIN.exe. J'avoue que j'ai un peu d'appréhension à me lancer là dedans. Des conseils ? Déjà est ce que ce fichier .exe va s'éxecuter dans un environnement Ubuntu ?
Hors ligne
#12 Le 02/12/2018, à 20:37
- ares
Re : Ports USB non fonctionnels sur portable Toshiba L670-11F
Naziel a écrit :Tu peux donner
dpkg -l | grep tlp
et aller voir dans le bios les différentes options proposées
Bonjour Naziel, la commande que tu proposes ne me renvoie rien. Je n'ai pas cette application tlp installée sur ce pc.
Oui mais tu as lu en retour :
tlp
La commande « tlp » n'a pas été trouvée, mais peut être installée avec :
sudo apt install tlp
Donc c'est simple pour installer "tlp"
Ce qui suit est un avis perso
1) les ports USB ne sont pas HS, c'est un défaut d'alimentation.
2) si tu as les compétences et sait repérer un fusible "cms"....
3)Il faut aussi regarder en amont de l'USB ex : AHCI ou xHCI dans le BIOS
4) je suppose qu'il faut windows... mais je n'utilise pas windows depuis plus de 15 ans... je sais je suis chanceux !
@+
Le droit d'emmerder Dieu BNF
Hors ligne
#13 Le 05/12/2018, à 18:57
- SupRshinoa
Re : Ports USB non fonctionnels sur portable Toshiba L670-11F
Merci de ton avis, ares.
Je viens d'installer tlp sur le PC portable. J'ai effectué une commande tlp-stat. Je vous mets le résultat obtenu ci dessous.
Si vous voyez quelque chose qui vous interpelle ...
--- TLP 1.1 --------------------------------------------
+++ Configured Settings: /etc/default/tlp
TLP_ENABLE=1
TLP_DEFAULT_MODE=AC
TLP_PERSISTENT_DEFAULT=0
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60
CPU_HWP_ON_AC=balance_performance
CPU_HWP_ON_BAT=balance_power
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1
NMI_WATCHDOG=0
ENERGY_PERF_POLICY_ON_AC=performance
ENERGY_PERF_POLICY_ON_BAT=power
DISK_DEVICES="sda sdb"
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"
SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
AHCI_RUNTIME_PM_TIMEOUT=15
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave
RADEON_POWER_PROFILE_ON_AC=high
RADEON_POWER_PROFILE_ON_BAT=low
RADEON_DPM_STATE_ON_AC=performance
RADEON_DPM_STATE_ON_BAT=battery
RADEON_DPM_PERF_LEVEL_ON_AC=auto
RADEON_DPM_PERF_LEVEL_ON_BAT=auto
WIFI_PWR_ON_AC=off
WIFI_PWR_ON_BAT=on
WOL_DISABLE=Y
SOUND_POWER_SAVE_ON_AC=0
SOUND_POWER_SAVE_ON_BAT=1
SOUND_POWER_SAVE_CONTROLLER=Y
BAY_POWEROFF_ON_AC=0
BAY_POWEROFF_ON_BAT=0
BAY_DEVICE="sr0"
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto
USB_AUTOSUSPEND=1
USB_BLACKLIST_BTUSB=0
USB_BLACKLIST_PHONE=0
USB_BLACKLIST_PRINTER=1
USB_BLACKLIST_WWAN=1
RESTORE_DEVICE_STATE_ON_STARTUP=0
+++ System Info
System = TOSHIBA PSK3BE-005015FR Satellite Pro L670
BIOS = 2.00
Release = Ubuntu 18.04.1 LTS
Kernel = 4.15.0-39-generic #42-Ubuntu SMP Tue Oct 23 15:43:58 UTC 2018 i686
/proc/cmdline = BOOT_IMAGE=/boot/vmlinuz-4.15.0-39-generic root=UUID=cc78eac4-d68e-48ce-9fbe-a85d93ef35de ro acpi=force irqpoll quiet splash vt.handoff=1
Init system = systemd v237
Boot mode = BIOS (CSM, Legacy)
+++ TLP Status
State = enabled
Last run = unknown
Mode = unknown
Power source = AC
+++ Processor
CPU model = Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz
/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver = acpi-cpufreq
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq = 933000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq = 2133000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies = 2133000 1999000 1866000 1733000 1599000 1466000 1333000 1199000 1066000 933000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_driver = acpi-cpufreq
/sys/devices/system/cpu/cpu1/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/cpu1/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq = 933000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq = 2133000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_available_frequencies = 2133000 1999000 1866000 1733000 1599000 1466000 1333000 1199000 1066000 933000 [kHz]
/sys/devices/system/cpu/cpu2/cpufreq/scaling_driver = acpi-cpufreq
/sys/devices/system/cpu/cpu2/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/cpu2/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq = 933000 [kHz]
/sys/devices/system/cpu/cpu2/cpufreq/scaling_max_freq = 2133000 [kHz]
/sys/devices/system/cpu/cpu2/cpufreq/scaling_available_frequencies = 2133000 1999000 1866000 1733000 1599000 1466000 1333000 1199000 1066000 933000 [kHz]
/sys/devices/system/cpu/cpu3/cpufreq/scaling_driver = acpi-cpufreq
/sys/devices/system/cpu/cpu3/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/cpu3/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil
/sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq = 933000 [kHz]
/sys/devices/system/cpu/cpu3/cpufreq/scaling_max_freq = 2133000 [kHz]
/sys/devices/system/cpu/cpu3/cpufreq/scaling_available_frequencies = 2133000 1999000 1866000 1733000 1599000 1466000 1333000 1199000 1066000 933000 [kHz]
/sys/devices/system/cpu/cpufreq/boost = (not available)
x86_energy_perf_policy: program not installed.
/sys/module/workqueue/parameters/power_efficient = Y
/proc/sys/kernel/nmi_watchdog = 1
+++ Undervolting
PHC kernel not available.
+++ Temperatures
CPU temp = 44 [°C]
Fan speed = (not available)
+++ File System
/proc/sys/vm/laptop_mode = 0
/proc/sys/vm/dirty_writeback_centisecs = 500
/proc/sys/vm/dirty_expire_centisecs = 3000
/proc/sys/vm/dirty_ratio = 20
/proc/sys/vm/dirty_background_ratio = 10
+++ Storage Devices
/dev/sda:
Model = TOSHIBA MK3263GSXN
Firmware = GC002M
APM Level = 128
Status = active/idle
Scheduler = cfq
Runtime PM: control = on, autosuspend_delay = -1
+++ AHCI Link Power Management (ALPM)
/sys/class/scsi_host/host0/link_power_management_policy = max_performance
/sys/class/scsi_host/host1/link_power_management_policy = max_performance
/sys/class/scsi_host/host2/link_power_management_policy = max_performance
/sys/class/scsi_host/host3/link_power_management_policy = max_performance
/sys/class/scsi_host/host4/link_power_management_policy = max_performance
/sys/class/scsi_host/host5/link_power_management_policy = max_performance
+++ AHCI Host Controller Runtime Power Management
/sys/bus/pci/devices/0000:00:1f.2/ata1/power/control = on
/sys/bus/pci/devices/0000:00:1f.2/ata2/power/control = on
/sys/bus/pci/devices/0000:00:1f.2/ata3/power/control = on
/sys/bus/pci/devices/0000:00:1f.2/ata4/power/control = on
/sys/bus/pci/devices/0000:00:1f.2/ata5/power/control = on
/sys/bus/pci/devices/0000:00:1f.2/ata6/power/control = on
+++ PCIe Active State Power Management
/sys/module/pcie_aspm/parameters/policy = default (using bios preferences)
+++ Intel Graphics
/sys/module/i915/parameters/enable_rc6 = 0 (disabled)
/sys/module/i915/parameters/enable_dc = -1 (use per-chip default)
/sys/module/i915/parameters/enable_fbc = 0 (disabled)
/sys/module/i915/parameters/enable_psr = -1 (use per-chip default)
/sys/module/i915/parameters/modeset = -1 (use per-chip default)
/sys/module/i915/parameters/semaphores = 0 (disabled)
+++ Wireless
bluetooth = none (no device)
wifi = on
wwan = none (no device)
wlp6s0(ath9k) : wifi, connected, power management = off
+++ Audio
/sys/module/snd_hda_intel/parameters/power_save = 0
/sys/module/snd_hda_intel/parameters/power_save_controller = Y
+++ Runtime Power Management
Device blacklist = (not configured)
Driver blacklist = amdgpu nouveau nvidia radeon (default)
/sys/bus/pci/devices/0000:00:00.0/power/control = on (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:00:02.0/power/control = on (0x030000, VGA compatible controller, i915)
/sys/bus/pci/devices/0000:00:16.0/power/control = on (0x078000, Communication controller, mei_me)
/sys/bus/pci/devices/0000:00:1a.0/power/control = on (0x0c0320, USB controller, ehci-pci)
/sys/bus/pci/devices/0000:00:1b.0/power/control = on (0x040300, Audio device, snd_hda_intel)
/sys/bus/pci/devices/0000:00:1c.0/power/control = on (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1c.1/power/control = on (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1d.0/power/control = on (0x0c0320, USB controller, ehci-pci)
/sys/bus/pci/devices/0000:00:1e.0/power/control = on (0x060401, PCI bridge, no driver)
/sys/bus/pci/devices/0000:00:1f.0/power/control = on (0x060100, ISA bridge, lpc_ich)
/sys/bus/pci/devices/0000:00:1f.2/power/control = on (0x010601, SATA controller, ahci)
/sys/bus/pci/devices/0000:00:1f.3/power/control = auto (0x0c0500, SMBus, i801_smbus)
/sys/bus/pci/devices/0000:00:1f.6/power/control = on (0x118000, Signal processing controller, intel ips)
/sys/bus/pci/devices/0000:01:00.0/power/control = on (0x020000, Ethernet controller, r8169)
/sys/bus/pci/devices/0000:06:00.0/power/control = on (0x028000, Network controller, ath9k)
/sys/bus/pci/devices/0000:ff:00.0/power/control = on (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:ff:00.1/power/control = on (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:ff:02.0/power/control = on (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:ff:02.1/power/control = on (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:ff:02.2/power/control = on (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:ff:02.3/power/control = on (0x060000, Host bridge, no driver)
+++ USB
Autosuspend = enabled
Device whitelist = (not configured)
Device blacklist = (not configured)
Bluetooth blacklist = disabled
Phone blacklist = disabled
WWAN blacklist = enabled
Bus 002 Device 002 ID 8087:0020 control = auto, autosuspend_delay_ms = 0 -- Intel Corp. Integrated Rate Matching Hub (hub)
Bus 002 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub)
Bus 001 Device 004 ID 04f2:b1d6 control = auto, autosuspend_delay_ms = 2000 -- Chicony Electronics Co., Ltd CNF9055 Toshiba Webcam (uvcvideo)
Bus 001 Device 002 ID 8087:0020 control = auto, autosuspend_delay_ms = 0 -- Intel Corp. Integrated Rate Matching Hub (hub)
Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub)
+++ Battery Status
/sys/class/power_supply/BAT1/manufacturer = COMPAL
/sys/class/power_supply/BAT1/model_name = PA3817U-1BRS
/sys/class/power_supply/BAT1/cycle_count = (not supported)
/sys/class/power_supply/BAT1/charge_full_design = 4500 [mAh]
/sys/class/power_supply/BAT1/charge_full = 1953 [mAh]
/sys/class/power_supply/BAT1/charge_now = 1883 [mAh]
/sys/class/power_supply/BAT1/current_now = 236 [mA]
/sys/class/power_supply/BAT1/status = Charging
Charge = 96.4 [%]
Capacity = 43.4 [%]
+++ Suggestions
* Install smartmontools for disk drive health info
Hors ligne