#1 Le 06/12/2018, à 19:46
- ubuntuuseruser
Station de disque dur usb 3 reconnue en tant qu'usb 2
Bonjour à tous,
Je suis nouveau ici alors j'espère que je poste au bon endroit. N'hésitez pas à me dire ou me déplacer 
!
Sur mon lenovo x-230, la station de disque ultrabox EB311SC, en usb 3 normalement n'est connectée qu'en usb 2. C'est embêtant, car j'ai des montagnes à mettre sur le disque et à 40-50Mo/s ce n'est pas top...
Je suis sur que l'usb 3 marche parce que j'ai un disque usb 3.0 qui marche à la bonne vitesse, sur mes 2 ports usb3.
Quelqus sorties:
~$ lsusb -t
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
|__ Port 1: Dev 12, If 0, Class=Mass Storage, Driver=uas, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/3p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/3p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
|__ Port 2: Dev 8, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 4: Dev 3, If 0, Class=Vendor Specific Class, Driver=btusb, 12M
|__ Port 4: Dev 3, If 1, Class=Vendor Specific Class, Driver=btusb, 12M
|__ Port 4: Dev 3, If 2, Class=Vendor Specific Class, Driver=btusb, 12M
|__ Port 4: Dev 3, If 3, Class=Application Specific Interface, Driver=, 12M~$ lsusb -D /dev/bus/usb/003/012 | grep bcdUSB
Couldn't open device, some information will be missing
Device: ID 152d:2561 JMicron Technology Corp. / JMicron USA Technology Corp.
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x152d JMicron Technology Corp. / JMicron USA Technology Corp.
idProduct 0x2561
bcdDevice 91.22
iManufacturer 1
iProduct 2
iSerial 5
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 85
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 6
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 98
iInterface 10
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Command pipe (0x01)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Status pipe (0x02)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Data-in pipe (0x03)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Data-out pipe (0x04)~$ dmseg
[ 1908.593789] usb 3-1: new high-speed USB device number 3 using xhci_hcd
[ 1908.795561] usb 3-1: New USB device found, idVendor=152d, idProduct=2561
[ 1908.795569] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 1908.795574] usb 3-1: Product: USB to SATA bridge
[ 1908.795578] usb 3-1: Manufacturer: OImaster
[ 1908.795581] usb 3-1: SerialNumber: 201501300013
[ 1908.797458] scsi host7: uas
[ 1908.801585] scsi 7:0:0:0: Direct-Access JMicron 9122 PQ: 0 ANSI: 6
[ 1908.803521] sd 7:0:0:0: Attached scsi generic sg0 type 0
[ 1908.803810] sd 7:0:0:0: [sda] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[ 1908.805338] sd 7:0:0:0: [sda] Write Protect is off
[ 1908.805344] sd 7:0:0:0: [sda] Mode Sense: 67 00 10 08
[ 1908.805998] sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1908.869565] sda: sda1
[ 1908.873381] sd 7:0:0:0: [sda] Attached SCSI disk
[ 1910.032271] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)je viens de mettre à jours mon noyau, je suis à la version
4.15.0-42, sous ubuntu 16.04
J'ai aussi vérifié dans mon bios que tout est en ordre, car j'ai lu à différents endroits que ça peut causer des problèmes.
Y a-t-il quelque chose que je puisse faire, ou est-ce peine perdue... ?
Merci pour toute aide !
EDIT: plus d'infos
- Sur un autre ordi avec ubuntu, USB 3.0 sans problème particulier.
- sur le même ordi, sous windows -> "your device could go faster" donc, juste usb 2
- mise à jours du bios sous windows, -> "your device could go faster" donc, juste usb 2
- mise à jours des drivers windows intel pour l'usb3 -> usb 3 qui marche
sous ubuntu sur mon X230, c'est toujours pareil, mais au moins je sais maintenant que ce doit être lié aux drivers...
Toujours pas d'idées ?
Dernière modification par ubuntuuseruser (Le 06/12/2018, à 22:58)
Hors ligne
#2 Le 06/12/2018, à 23:00
- ubuntuuseruser
Re : Station de disque dur usb 3 reconnue en tant qu'usb 2
Peut être quelque chose de plus intéressant:
~$ journalctl -b | grep xhci
déc. 06 22:01:28 myname kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
déc. 06 22:01:28 myname kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
déc. 06 22:01:28 myname kernel: xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
déc. 06 22:01:28 myname kernel: xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
déc. 06 22:01:28 myname kernel: usb usb3: Manufacturer: Linux 4.15.0-42-generic xhci-hcd
déc. 06 22:01:28 myname kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
déc. 06 22:01:28 myname kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
déc. 06 22:01:28 myname kernel: xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
déc. 06 22:01:28 myname kernel: usb usb4: Manufacturer: Linux 4.15.0-42-generic xhci-hcd
déc. 06 22:01:28 myname kernel: usb 3-1: new high-speed USB device number 2 using xhci_hcd
déc. 06 21:25:50 myname sudo[3714]: myname : TTY=pts/4 ; PWD=/home/myname ; USER=root ; COMMAND=/sbin/modprobe usb-xhci-platform
déc. 06 21:33:34 myname sudo[3868]: myname : TTY=pts/4 ; PWD=/home/myname ; USER=root ; COMMAND=/sbin/modprobe xhci-plat-hcd
déc. 06 21:34:02 myname kernel: usb 3-1: new high-speed USB device number 3 using xhci_hcd Mais que veut dire ce "cache line size of 64 is not supported" ?
Hors ligne
#3 Le 07/12/2018, à 00:49
- ubuntuuseruser
Re : Station de disque dur usb 3 reconnue en tant qu'usb 2
Au cas ou, dmesg depuis le démarage, avec la station branchée. Je ne sais vraiment plus ou chercher. Je n'ai pas trouvé de documentation pour savoir comment le noyau découvre si il peut utiliser le super speed ou non...
[ 0.000000] Linux version 4.15.0-42-generic (buildd@lgw01-amd64-023) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10)) #45~16.04.1-Ubuntu SMP Mon Nov 19 13:02:27 UTC 2018 (Ubuntu 4.15.0-42.45~16.04.1-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-42-generic root=UUID=5891ed6e-d756-4afb-afe8-ee2f3449497e ro persistent quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000cec2ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cec30000-0x00000000dae9efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e5fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000041e600000-0x000000041effffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 2320CTO/2320CTO, BIOS G2ETB4WW (2.74 ) 11/14/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 6 base 100000000 mask F00000000 write-back
[ 0.000000] 7 base 200000000 mask E00000000 write-back
[ 0.000000] 8 base 400000000 mask FE0000000 write-back
[ 0.000000] 9 base 41F000000 mask FFF000000 uncachable
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0xcec30 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576
[ 0.000000] BRK [0x3b033f000, 0x3b033ffff] PGTABLE
[ 0.000000] BRK [0x3b0340000, 0x3b0340fff] PGTABLE
[ 0.000000] BRK [0x3b0341000, 0x3b0341fff] PGTABLE
[ 0.000000] BRK [0x3b0342000, 0x3b0342fff] PGTABLE
[ 0.000000] BRK [0x3b0343000, 0x3b0343fff] PGTABLE
[ 0.000000] BRK [0x3b0344000, 0x3b0344fff] PGTABLE
[ 0.000000] BRK [0x3b0345000, 0x3b0345fff] PGTABLE
[ 0.000000] BRK [0x3b0346000, 0x3b0346fff] PGTABLE
[ 0.000000] BRK [0x3b0347000, 0x3b0347fff] PGTABLE
[ 0.000000] BRK [0x3b0348000, 0x3b0348fff] PGTABLE
[ 0.000000] BRK [0x3b0349000, 0x3b0349fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x314c4000-0x34a59fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000DAFFE170 0000C4 (v01 LENOVO TP-G2 00002740 PTL 00000002)
[ 0.000000] ACPI: FACP 0x00000000DAFE5000 00010C (v05 LENOVO TP-G2 00002740 PTL 00000002)
[ 0.000000] ACPI: DSDT 0x00000000DAFE7000 011383 (v01 LENOVO TP-G2 00002740 INTL 20061109)
[ 0.000000] ACPI: FACS 0x00000000DAF5A000 000040
[ 0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-G2 00002740 PTL 00000001)
[ 0.000000] ACPI: TCPA 0x00000000DAFFC000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.000000] ACPI: SSDT 0x00000000DAFFB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000DAFFA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000DAFF9000 0007A8 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: HPET 0x00000000DAFE3000 000038 (v01 LENOVO TP-G2 00002740 PTL 00000002)
[ 0.000000] ACPI: APIC 0x00000000DAFE2000 000098 (v01 LENOVO TP-G2 00002740 PTL 00000002)
[ 0.000000] ACPI: MCFG 0x00000000DAFE1000 00003C (v01 LENOVO TP-G2 00002740 PTL 00000002)
[ 0.000000] ACPI: ECDT 0x00000000DAFE0000 000052 (v01 LENOVO TP-G2 00002740 PTL 00000002)
[ 0.000000] ACPI: FPDT 0x00000000DAFDF000 000064 (v01 LENOVO TP-G2 00002740 PTL 00000002)
[ 0.000000] ACPI: ASF! 0x00000000DAFE6000 0000A5 (v32 LENOVO TP-G2 00002740 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x00000000DAFDE000 00003E (v01 LENOVO TP-G2 00002740 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x00000000DAFDD000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: POAT 0x00000000DAFDC000 000055 (v03 LENOVO TP-G2 00002740 PTL 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DAFDB000 000C37 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000DAFDA000 000A83 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: DMAR 0x00000000DAFD9000 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: UEFI 0x00000000DAFD8000 000292 (v01 LENOVO TP-G2 00002740 PTL 00000002)
[ 0.000000] ACPI: DBG2 0x00000000DAFD7000 0000E9 (v00 LENOVO TP-G2 00002740 PTL 00000002)
[ 0.000000] ACPI: DMI detected: Lenovo ThinkPad X230
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041e5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41e5ca000-0x41e5f4fff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041e5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.000000] node 0: [mem 0x0000000040005000-0x00000000cec2ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041e5fffff]
[ 0.000000] On node 0 totalpages: 4116427
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13161 pages used for memmap
[ 0.000000] DMA32 zone: 842287 pages, LIFO batch:31
[ 0.000000] Normal zone: 51096 pages used for memmap
[ 0.000000] Normal zone: 3270144 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 100 pages
[ 0.000000] Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcec30000-0xdae9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdafff000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x51b with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4052085
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-42-generic root=UUID=5891ed6e-d756-4afb-afe8-ee2f3449497e ro persistent quiet splash
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16057056K/16465708K available (12300K kernel code, 2471K rwdata, 4260K rodata, 2408K init, 2416K bss, 408652K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39192 entries in 154 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] DMAR: Host address width 36
[ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.000000] DMAR: RMRR base: 0x000000da2ba000 end: 0x000000da2d0fff
[ 0.000000] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.000000] x2apic enabled
[ 0.000000] Switched APIC routing to cluster x2apic.
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 2494.304 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.60 BogoMIPS (lpj=9977216)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.029604] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.030882] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.030937] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.030979] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.031197] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.031198] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.031201] mce: CPU supports 7 MCE banks
[ 0.031209] CPU0: Thermal monitoring enabled (TM1)
[ 0.031217] process: using mwait in idle threads
[ 0.031219] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.031220] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.031221] Spectre V2 : Mitigation: Full generic retpoline
[ 0.031222] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.031222] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.031223] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.031224] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.031329] Freeing SMP alternatives memory: 36K
[ 0.033859] TSC deadline timer enabled
[ 0.033862] smpboot: CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.033933] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.033954] ... version: 3
[ 0.033955] ... bit width: 48
[ 0.033955] ... generic registers: 4
[ 0.033956] ... value mask: 0000ffffffffffff
[ 0.033957] ... max period: 00007fffffffffff
[ 0.033957] ... fixed-purpose events: 3
[ 0.033958] ... event mask: 000000070000000f
[ 0.033992] Hierarchical SRCU implementation.
[ 0.035075] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.035091] smp: Bringing up secondary CPUs ...
[ 0.035171] x86: Booting SMP configuration:
[ 0.035171] .... node #0, CPUs: #1 #2 #3
[ 0.040064] smp: Brought up 1 node, 4 CPUs
[ 0.040064] smpboot: Max logical packages: 2
[ 0.040064] smpboot: Total of 4 processors activated (19954.43 BogoMIPS)
[ 0.043062] devtmpfs: initialized
[ 0.043062] x86/mm: Memory block size: 128MB
[ 0.044909] evm: security.selinux
[ 0.044909] evm: security.SMACK64
[ 0.044910] evm: security.SMACK64EXEC
[ 0.044910] evm: security.SMACK64TRANSMUTE
[ 0.044911] evm: security.SMACK64MMAP
[ 0.044911] evm: security.apparmor
[ 0.044912] evm: security.ima
[ 0.044912] evm: security.capability
[ 0.044928] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
[ 0.044928] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.044928] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.044928] pinctrl core: initialized pinctrl subsystem
[ 0.044928] RTC time: 22:26:03, date: 12/06/18
[ 0.044928] NET: Registered protocol family 16
[ 0.044928] audit: initializing netlink subsys (disabled)
[ 0.044928] audit: type=2000 audit(1544135163.044:1): state=initialized audit_enabled=0 res=1
[ 0.044928] cpuidle: using governor ladder
[ 0.044928] cpuidle: using governor menu
[ 0.044928] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.044928] ACPI: bus type PCI registered
[ 0.044928] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.044928] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.044928] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.044928] PCI: Using configuration type 1 for base access
[ 0.044928] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.045281] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.045281] ACPI: Added _OSI(Module Device)
[ 0.045281] ACPI: Added _OSI(Processor Device)
[ 0.045281] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.045281] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.045281] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.045281] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.045281] ACPI: Deleted _OSI(Windows 2012)
[ 0.045281] ACPI: EC: EC started
[ 0.045281] ACPI: EC: interrupt blocked
[ 0.048513] ACPI: \: Used as first EC
[ 0.048515] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.048516] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.054094] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.059203] ACPI: Dynamic OEM Table Load:
[ 0.059214] ACPI: SSDT 0xFFFF8BF28BA10000 000A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.059763] ACPI: Dynamic OEM Table Load:
[ 0.059770] ACPI: SSDT 0xFFFF8BF28B999000 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.060173] ACPI: Dynamic OEM Table Load:
[ 0.060179] ACPI: SSDT 0xFFFF8BF28B9A7200 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.061304] ACPI: Interpreter enabled
[ 0.061324] ACPI: (supports S0 S3 S4 S5)
[ 0.061325] ACPI: Using IOAPIC for interrupt routing
[ 0.061350] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.061676] ACPI: GPE 0x16 active on init
[ 0.061688] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.066330] ACPI: Power Resource [PUBS] (on)
[ 0.066761] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[ 0.068094] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[ 0.070920] acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
[ 0.071528] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.071662] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.071793] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.071924] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.072057] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.072189] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.072320] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.072451] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.072556] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.072561] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.072760] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.072851] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.072853] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.072854] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.072856] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.073061] PCI host bridge to bus 0000:00
[ 0.073063] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.073065] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.073066] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.073068] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
[ 0.073069] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[ 0.073071] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.073079] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.073165] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.073176] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.073181] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.073185] pci 0000:00:02.0: reg 0x20: [io 0x7000-0x703f]
[ 0.073282] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.073308] pci 0000:00:14.0: reg 0x10: [mem 0xf2520000-0xf252ffff 64bit]
[ 0.073379] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.073450] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.073476] pci 0000:00:16.0: reg 0x10: [mem 0xf2535000-0xf253500f 64bit]
[ 0.073551] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.073623] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.073643] pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff]
[ 0.073652] pci 0000:00:19.0: reg 0x14: [mem 0xf253b000-0xf253bfff]
[ 0.073660] pci 0000:00:19.0: reg 0x18: [io 0x7080-0x709f]
[ 0.073721] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.073790] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.073813] pci 0000:00:1a.0: reg 0x10: [mem 0xf253a000-0xf253a3ff]
[ 0.073899] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.073969] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.073991] pci 0000:00:1b.0: reg 0x10: [mem 0xf2530000-0xf2533fff 64bit]
[ 0.074067] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.074145] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.074230] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.074305] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.074392] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.074469] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.074554] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.074636] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.074659] pci 0000:00:1d.0: reg 0x10: [mem 0xf2539000-0xf25393ff]
[ 0.074744] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.074814] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.074985] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.075003] pci 0000:00:1f.2: reg 0x10: [io 0x70a8-0x70af]
[ 0.075011] pci 0000:00:1f.2: reg 0x14: [io 0x70b4-0x70b7]
[ 0.075019] pci 0000:00:1f.2: reg 0x18: [io 0x70a0-0x70a7]
[ 0.075027] pci 0000:00:1f.2: reg 0x1c: [io 0x70b0-0x70b3]
[ 0.075035] pci 0000:00:1f.2: reg 0x20: [io 0x7060-0x707f]
[ 0.075043] pci 0000:00:1f.2: reg 0x24: [mem 0xf2538000-0xf25387ff]
[ 0.075084] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.075148] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.075167] pci 0000:00:1f.3: reg 0x10: [mem 0xf2534000-0xf25340ff 64bit]
[ 0.075188] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.075452] pci 0000:02:00.0: [1180:e822] type 00 class 0x088001
[ 0.075477] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.075514] pci 0000:02:00.0: reg 0x10: [mem 0xf1d00000-0xf1d000ff]
[ 0.075734] pci 0000:02:00.0: supports D1 D2
[ 0.075736] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.088222] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.088226] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 0.088230] pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff]
[ 0.088236] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.088306] pci 0000:03:00.0: [10ec:8176] type 00 class 0x028000
[ 0.088355] pci 0000:03:00.0: reg 0x10: [io 0x5000-0x50ff]
[ 0.088404] pci 0000:03:00.0: reg 0x18: [mem 0xf1c00000-0xf1c03fff 64bit]
[ 0.088589] pci 0000:03:00.0: supports D1 D2
[ 0.088591] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.100039] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.100045] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.100052] pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff]
[ 0.100150] acpiphp: Slot [1] registered
[ 0.100157] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.100161] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.100165] pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff]
[ 0.100171] pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.101438] ACPI: EC: interrupt unblocked
[ 0.101444] ACPI: EC: event unblocked
[ 0.101451] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.101453] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.101658] SCSI subsystem initialized
[ 0.101673] libata version 3.00 loaded.
[ 0.101673] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.101673] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.101673] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.101673] vgaarb: loaded
[ 0.101673] ACPI: bus type USB registered
[ 0.101673] usbcore: registered new interface driver usbfs
[ 0.101673] usbcore: registered new interface driver hub
[ 0.101673] usbcore: registered new device driver usb
[ 0.101673] EDAC MC: Ver: 3.0.0
[ 0.101673] PCI: Using ACPI for IRQ routing
[ 0.101673] PCI: pci_cache_line_size set to 64 bytes
[ 0.101673] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.101673] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.101673] e820: reserve RAM buffer [mem 0xcec30000-0xcfffffff]
[ 0.101673] e820: reserve RAM buffer [mem 0x41e600000-0x41fffffff]
[ 0.101673] NetLabel: Initializing
[ 0.101673] NetLabel: domain hash size = 128
[ 0.101673] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.101673] NetLabel: unlabeled traffic allowed by default
[ 0.104437] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.104442] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.106468] clocksource: Switched to clocksource hpet
[ 0.114465] VFS: Disk quotas dquot_6.6.0
[ 0.114484] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.114585] AppArmor: AppArmor Filesystem Enabled
[ 0.114616] pnp: PnP ACPI init
[ 0.115296] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.115298] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.115299] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.115301] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.115302] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.115304] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.115305] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.115307] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.115308] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.115310] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.115312] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.115313] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.115315] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.115316] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.115318] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[ 0.115320] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.115322] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.115328] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.115448] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[ 0.115467] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.115469] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.115470] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.115472] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.115474] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.115476] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.115478] system 00:01: [mem 0xfffff000-0xffffffff] has been reserved
[ 0.115479] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.115481] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.115483] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.115484] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.115486] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.115490] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.115551] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.115575] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.115595] pnp 00:04: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active)
[ 0.115654] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.116210] pnp: PnP ACPI: found 6 devices
[ 0.122434] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.122466] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.122470] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 0.122476] pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff]
[ 0.122480] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.122486] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.122489] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.122494] pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff]
[ 0.122502] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.122505] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.122510] pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff]
[ 0.122514] pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.122522] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.122523] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.122525] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.122526] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window]
[ 0.122528] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[ 0.122529] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
[ 0.122530] pci_bus 0000:02: resource 1 [mem 0xf1d00000-0xf24fffff]
[ 0.122532] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.122533] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.122535] pci_bus 0000:03: resource 1 [mem 0xf1c00000-0xf1cfffff]
[ 0.122536] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.122537] pci_bus 0000:04: resource 1 [mem 0xf1400000-0xf1bfffff]
[ 0.122539] pci_bus 0000:04: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.122645] NET: Registered protocol family 2
[ 0.122840] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.123039] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.123157] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.123197] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.123238] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.123310] NET: Registered protocol family 1
[ 0.123323] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.123957] PCI: CLS 64 bytes, default 64
[ 0.123999] Unpacking initramfs...
[ 0.918174] Freeing initrd memory: 54872K
[ 0.918209] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.918212] software IO TLB [mem 0xcac30000-0xcec30000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 0.918500] Scanning for low memory corruption every 60 seconds
[ 0.919163] Initialise system trusted keyrings
[ 0.919173] Key type blacklist registered
[ 0.919206] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.920265] zbud: loaded
[ 0.920733] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.920866] fuse init (API version 7.26)
[ 0.922176] Key type asymmetric registered
[ 0.922177] Asymmetric key parser 'x509' registered
[ 0.922206] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.922241] io scheduler noop registered
[ 0.922244] io scheduler deadline registered
[ 0.922282] io scheduler cfq registered (default)
[ 0.922826] intel_idle: MWAIT substates: 0x21120
[ 0.922827] intel_idle: v0.4.1 model 0x3A
[ 0.922974] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.923150] ACPI: AC Adapter [AC] (on-line)
[ 0.923202] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.923231] ACPI: Lid Switch [LID]
[ 0.923263] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.923284] ACPI: Sleep Button [SLPB]
[ 0.923325] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.923345] ACPI: Power Button [PWRF]
[ 0.924407] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.924785] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.924786] ACPI: Thermal Zone [THM0] (60 C)
[ 0.924925] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.926781] Linux agpgart interface v0.103
[ 0.932111] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[ 0.932144] ACPI: Battery Slot [BAT0] (battery present)
[ 1.005521] loop: module loaded
[ 1.005704] libphy: Fixed MDIO Bus: probed
[ 1.005705] tun: Universal TUN/TAP device driver, 1.6
[ 1.005737] PPP generic driver version 2.4.2
[ 1.005778] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.005781] ehci-pci: EHCI PCI platform driver
[ 1.005911] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.005916] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.005930] ehci-pci 0000:00:1a.0: debug port 2
[ 1.009824] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.009843] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf253a000
[ 1.024017] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.024069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.024070] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.024072] usb usb1: Product: EHCI Host Controller
[ 1.024073] usb usb1: Manufacturer: Linux 4.15.0-42-generic ehci_hcd
[ 1.024074] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.024212] hub 1-0:1.0: USB hub found
[ 1.024218] hub 1-0:1.0: 3 ports detected
[ 1.024452] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.024456] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.024467] ehci-pci 0000:00:1d.0: debug port 2
[ 1.028378] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.028388] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2539000
[ 1.044022] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.044057] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.044059] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.044060] usb usb2: Product: EHCI Host Controller
[ 1.044061] usb usb2: Manufacturer: Linux 4.15.0-42-generic ehci_hcd
[ 1.044063] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.044254] hub 2-0:1.0: USB hub found
[ 1.044260] hub 2-0:1.0: 3 ports detected
[ 1.044410] ehci-platform: EHCI generic platform driver
[ 1.044421] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.044424] ohci-pci: OHCI PCI platform driver
[ 1.044431] ohci-platform: OHCI generic platform driver
[ 1.044436] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.044537] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.044542] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.045625] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[ 1.045630] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.045759] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.045760] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.045762] usb usb3: Product: xHCI Host Controller
[ 1.045763] usb usb3: Manufacturer: Linux 4.15.0-42-generic xhci-hcd
[ 1.045764] usb usb3: SerialNumber: 0000:00:14.0
[ 1.045934] hub 3-0:1.0: USB hub found
[ 1.045945] hub 3-0:1.0: 4 ports detected
[ 1.046425] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.046428] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.046431] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.046462] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.046464] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.046465] usb usb4: Product: xHCI Host Controller
[ 1.046466] usb usb4: Manufacturer: Linux 4.15.0-42-generic xhci-hcd
[ 1.046468] usb usb4: SerialNumber: 0000:00:14.0
[ 1.046654] hub 4-0:1.0: USB hub found
[ 1.046664] hub 4-0:1.0: 4 ports detected
[ 1.047270] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.049258] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.049262] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.049504] mousedev: PS/2 mouse device common for all mice
[ 1.049848] rtc_cmos 00:02: RTC can wake from S4
[ 1.049991] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.050020] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.050027] i2c /dev entries driver
[ 1.050031] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[ 1.050109] device-mapper: uevent: version 1.0.3
[ 1.050168] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.050173] intel_pstate: Intel P-state driver initializing
[ 1.050401] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.050745] NET: Registered protocol family 10
[ 1.051054] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.054474] Segment Routing with IPv6
[ 1.054493] NET: Registered protocol family 17
[ 1.054536] Key type dns_resolver registered
[ 1.054747] RAS: Correctable Errors collector initialized.
[ 1.054773] microcode: sig=0x306a9, pf=0x10, revision=0x20
[ 1.054822] microcode: Microcode Update Driver: v2.2.
[ 1.054831] sched_clock: Marking stable (1054819514, 0)->(1034279805, 20539709)
[ 1.055316] registered taskstats version 1
[ 1.055323] Loading compiled-in X.509 certificates
[ 1.057613] Loaded X.509 cert 'Build time autogenerated kernel key: 2e7d761f2a59f0511a4bdf8e420ba040dde1244e'
[ 1.057634] zswap: loaded using pool lzo/zbud
[ 1.060728] Key type big_key registered
[ 1.060731] Key type trusted registered
[ 1.062266] Key type encrypted registered
[ 1.062270] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.083787] ima: Allocated hash algorithm: sha1
[ 1.250105] evm: HMAC attrs: 0x1
[ 1.250475] Magic number: 14:197:451
[ 1.250590] rtc_cmos 00:02: setting system clock to 2018-12-06 22:26:04 UTC (1544135164)
[ 1.250663] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.250664] EDD information not available.
[ 1.252504] Freeing unused kernel memory: 2408K
[ 1.264103] Write protecting the kernel read-only data: 20480k
[ 1.264660] Freeing unused kernel memory: 2008K
[ 1.267981] Freeing unused kernel memory: 1884K
[ 1.274653] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.274654] x86/mm: Checking user space page tables
[ 1.281130] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.291149] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.291225] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.291237] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.344567] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.344682] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.346176] pps_core: LinuxPPS API ver. 1 registered
[ 1.346176] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.347203] PTP clock support registered
[ 1.352048] sdhci: Secure Digital Host Controller Interface driver
[ 1.352050] sdhci: Copyright(c) Pierre Ossman
[ 1.352927] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.352928] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.353139] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.353909] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7)
[ 1.354459] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.354730] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 1.360029] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.380031] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.380049] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 1.468033] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.516784] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.516786] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.517293] hub 1-1:1.0: USB hub found
[ 1.517512] hub 1-1:1.0: 6 ports detected
[ 1.533383] usb 3-1: New USB device found, idVendor=152d, idProduct=2561
[ 1.533385] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 1.533386] usb 3-1: Product: USB to SATA bridge
[ 1.533387] usb 3-1: Manufacturer: OImaster
[ 1.533388] usb 3-1: SerialNumber: 201501300013
[ 1.537522] usbcore: registered new interface driver usb-storage
[ 1.539525] scsi host0: uas
[ 1.539599] usbcore: registered new interface driver uas
[ 1.540299] scsi 0:0:0:0: Direct-Access JMicron 9122 PQ: 0 ANSI: 6
[ 1.540418] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.540420] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.540687] hub 2-1:1.0: USB hub found
[ 1.540763] hub 2-1:1.0: 8 ports detected
[ 1.541635] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.543199] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 1.543541] sd 0:0:0:0: [sda] Write Protect is off
[ 1.543543] sd 0:0:0:0: [sda] Mode Sense: 67 00 10 08
[ 1.544213] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.550289] sda: sda1
[ 1.550760] random: fast init done
[ 1.553389] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.564585] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:20:93:0b
[ 1.564587] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.564641] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.564677] ahci 0000:00:1f.2: version 3.0
[ 1.564884] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.565313] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.574999] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[ 1.575006] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 1.608796] scsi host1: ahci
[ 1.608893] scsi host2: ahci
[ 1.608980] scsi host3: ahci
[ 1.609066] scsi host4: ahci
[ 1.609235] scsi host5: ahci
[ 1.609318] scsi host6: ahci
[ 1.609354] ata1: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538100 irq 28
[ 1.609357] ata2: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538180 irq 28
[ 1.609360] ata3: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538200 irq 28
[ 1.609360] ata4: DUMMY
[ 1.609363] ata5: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538300 irq 28
[ 1.609363] ata6: DUMMY
[ 1.609993] [drm] Memory usable by graphics device = 2048M
[ 1.609995] [drm] Replacing VGA console driver
[ 1.610936] Console: switching to colour dummy device 80x25
[ 1.616133] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.616133] [drm] Driver supports precise vblank timestamp query.
[ 1.616694] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.691871] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 1.692473] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 1.693634] acpi device:00: registered as cooling_device4
[ 1.693708] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.812050] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[ 1.922935] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.924611] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.924614] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.924860] ata1.00: supports DRM functions and may not be fully accessible
[ 1.925552] ata1.00: disabling queued TRIM support
[ 1.925554] ata1.00: ATA-9: Samsung SSD 850 EVO 1TB, EMT03B6Q, max UDMA/133
[ 1.925556] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.927438] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.927441] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.927682] ata1.00: supports DRM functions and may not be fully accessible
[ 1.928302] ata1.00: disabling queued TRIM support
[ 1.929898] ata1.00: configured for UDMA/133
[ 1.930076] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 3B6Q PQ: 0 ANSI: 5
[ 1.930313] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.930401] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.930422] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.930425] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.930462] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.931140] sdb: sdb1 sdb2 sdb3
[ 1.931890] sd 1:0:0:0: [sdb] supports TCG Opal
[ 1.931892] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.948140] tsc: Refined TSC clocksource calibration: 2494.332 MHz
[ 1.948151] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f44f92df3, max_idle_ns: 440795329494 ns
[ 1.953821] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c069
[ 1.953823] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.953825] usb 1-1.2: Product: USB Laser Mouse
[ 1.953826] usb 1-1.2: Manufacturer: Logitech
[ 1.958967] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.964390] usbcore: registered new interface driver usbhid
[ 1.964391] usbhid: USB HID core driver
[ 1.965720] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C069.0001/input/input7
[ 1.965838] hid-generic 0003:046D:C069.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.0-1.2/input0
[ 2.158541] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 2.187090] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 2.208593] fbcon: inteldrmfb (fb0) is primary device
[ 2.246873] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.248199] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
[ 2.248208] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.287334] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.563538] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.565374] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.565387] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.565662] ata3.00: supports DRM functions and may not be fully accessible
[ 2.566657] ata3.00: disabling queued TRIM support
[ 2.566661] ata3.00: ATA-9: Samsung SSD 850 EVO mSATA 500GB, EMT41B6Q, max UDMA/133
[ 2.566664] ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.568466] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.568472] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.568733] ata3.00: supports DRM functions and may not be fully accessible
[ 2.569544] ata3.00: disabling queued TRIM support
[ 2.570675] ata3.00: configured for UDMA/133
[ 2.571054] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
[ 2.571483] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.571559] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 2.571573] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.571575] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.571612] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.572305] sdc: sdc1 sdc2 sdc3
[ 2.573002] sd 3:0:0:0: [sdc] supports TCG Opal
[ 2.573003] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.887012] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.924288] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.972155] clocksource: Switched to clocksource tsc
[ 3.093004] Console: switching to colour frame buffer device 170x48
[ 3.111583] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.117035] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8
[ 3.240019] raid6: sse2x1 gen() 7681 MB/s
[ 3.288020] raid6: sse2x1 xor() 6448 MB/s
[ 3.336015] raid6: sse2x2 gen() 9853 MB/s
[ 3.384020] raid6: sse2x2 xor() 6182 MB/s
[ 3.432023] raid6: sse2x4 gen() 11882 MB/s
[ 3.480020] raid6: sse2x4 xor() 8601 MB/s
[ 3.480021] raid6: using algorithm sse2x4 gen() 11882 MB/s
[ 3.480022] raid6: .... xor() 8601 MB/s, rmw enabled
[ 3.480022] raid6: using ssse3x2 recovery algorithm
[ 3.482908] xor: automatically using best checksumming function avx
[ 3.498125] Btrfs loaded, crc32c=crc32c-intel
[ 3.617064] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.704941] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 3.724327] systemd[1]: Detected architecture x86-64.
[ 3.724638] systemd[1]: Set hostname to <goodboy>.
[ 3.794027] systemd[1]: Reached target User and Group Name Lookups.
[ 3.794119] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.794144] systemd[1]: Listening on udev Kernel Socket.
[ 3.794152] systemd[1]: Reached target Remote File Systems (Pre).
[ 3.794158] systemd[1]: Reached target Encrypted Volumes.
[ 3.794213] systemd[1]: Listening on Journal Audit Socket.
[ 3.794247] systemd[1]: Listening on Journal Socket.
[ 3.811303] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
[ 3.821518] lp: driver loaded but no devices found
[ 3.827085] ppdev: user-space parallel port driver
[ 3.859966] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.863243] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.865626] systemd-journald[288]: Received request to flush runtime journal from PID 1
[ 3.894898] rtl8192ce: Chip Version ID: B_CHIP_88C
[ 3.904780] rtl8192ce: rtl8192ce: Power Save off (module option)
[ 3.904781] rtl8192ce: rtl8192ce: FW Power Save off (module option)
[ 3.904814] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[ 3.909126] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 3.909350] rtlwifi: rtlwifi: wireless switch is on
[ 4.081384] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.121690] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20170831/utaddress-247)
[ 4.121697] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.121700] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170831/utaddress-247)
[ 4.121704] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.121705] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170831/utaddress-247)
[ 4.121708] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.121709] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170831/utaddress-247)
[ 4.121713] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.121713] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.121976] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 4.131809] Non-volatile memory driver v1.3
[ 4.140526] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 4.140527] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 4.140528] thinkpad_acpi: ThinkPad BIOS G2ETB4WW (2.74 ), EC unknown
[ 4.140529] thinkpad_acpi: Lenovo ThinkPad X230, model 2320CTO
[ 4.142481] thinkpad_acpi: radio switch found; radios are disabled
[ 4.142503] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 4.142504] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 4.151724] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[ 4.155919] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 4.162242] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
[ 4.193537] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 4.193539] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 4.193540] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 4.193541] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 4.234241] AVX version of gcm_enc/dec engaged.
[ 4.234242] AES CTR mode by8 optimization enabled
[ 4.236507] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.270493] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 4.270497] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.270499] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 4.270501] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.270502] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.270505] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 4.270506] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 4.270508] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 4.294935] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.295009] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.295146] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.295214] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 4.295344] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 4.295468] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 4.295587] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 4.416767] intel_rapl: Found RAPL domain package
[ 4.416769] intel_rapl: Found RAPL domain core
[ 4.416770] intel_rapl: Found RAPL domain uncore
[ 4.416776] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 4.422347] rtl8192ce 0000:03:00.0 wlp3s0: renamed from wlan0
[ 4.533058] random: crng init done
[ 4.533060] random: 7 urandom warning(s) missed due to ratelimiting
[ 4.539707] Adding 7944916k swap on /dev/sdb1. Priority:-2 extents:1 across:7944916k SSFS
[ 5.171935] audit: type=1400 audit(1544135168.413:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=838 comm="apparmor_parser"
[ 5.171939] audit: type=1400 audit(1544135168.413:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=838 comm="apparmor_parser"
[ 5.171941] audit: type=1400 audit(1544135168.413:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=838 comm="apparmor_parser"
[ 5.171943] audit: type=1400 audit(1544135168.413:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=838 comm="apparmor_parser"
[ 5.172702] audit: type=1400 audit(1544135168.417:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=837 comm="apparmor_parser"
[ 5.172705] audit: type=1400 audit(1544135168.417:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=837 comm="apparmor_parser"
[ 5.173362] audit: type=1400 audit(1544135168.417:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=841 comm="apparmor_parser"
[ 5.174851] audit: type=1400 audit(1544135168.417:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=842 comm="apparmor_parser"
[ 5.175743] audit: type=1400 audit(1544135168.417:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=845 comm="apparmor_parser"
[ 5.178256] audit: type=1400 audit(1544135168.421:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=846 comm="apparmor_parser"
[ 6.479033] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6.484533] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 6.708320] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 12.051108] vboxdrv: loading out-of-tree module taints kernel.
[ 12.051365] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 12.059414] vboxdrv: Found 4 processor cores
[ 12.080482] vboxdrv: TSC mode is Invariant, tentative frequency 2494325354 Hz
[ 12.080483] vboxdrv: Successfully loaded version 5.1.38_Ubuntu (interface 0x002a0000)
[ 12.087466] VBoxNetFlt: Successfully started.
[ 12.097493] VBoxNetAdp: Successfully started.
[ 12.109434] VBoxPciLinuxInit
[ 12.117463] vboxpci: IOMMU not found (not registered)Hors ligne