Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 30/01/2019, à 13:54

Godri chini

Tablette graphique Huion 610pro

Bonjour ,

J'essaie de faire fonctionner ma tablette correctement pour utiliser Blender 3D ,c'est ma première tablette ,  Elle ne semble pas être reconnu , elle ne fonctionne que sur une petite partie de son pad , je pense que c'est du a un conflit de résolution entre mes écrans et la tablette.
J'ai cherché un peu partout , j'ai cru comprendre qui fallait installer DKMS et depuis je suis perdu , je ne sais pas si je suis parvenu a l'installer ou encore si c'était nécessaire.
Comment pourrais-je la configurer ?

Tablette : Huion 610 pro ( https://www.amazon.fr/H610-Pro-Graphiqu … eNumber=18 )
Os : Ubuntu 18.04.1 LTS

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 046d:c083 Logitech, Inc. 
Bus 001 Device 004: ID 1b1c:1b3d Corsair 
Bus 001 Device 003: ID 1532:050f Razer USA, Ltd 
Bus 001 Device 011: ID 256c:006e  
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 

Liens que j'ai pu trouver :

https://eightbitdreams.wordpress.com/20 … r-install/
https://sansindiscretion.fr/blog/2017-1 … iUuASyevPQ
https://github.com/DIGImend/digimend-kernel-drivers

Je suis débutant sur Linux & Blender , j'ai passé le cap après que mon window se soi suicidé en installant une mise a jour , n'hésitez pas a me demander quoi que ce soi

merci de m'avoir lu

Dernière modification par Godri chini (Le 30/01/2019, à 15:25)

Hors ligne

#2 Le 30/01/2019, à 14:08

xubu1957

Re : Tablette graphique Huion 610pro

Bonjour,

Il y avait eu cette discussion > [résolu] tablette huion 610pro fait planter krita

_ _ _

Pour ajouter toi-même les balises code à ton précédent message #1 :              Merci               wink

  • Cliquer sur  le lien « Modifier » en bas à droite du message

  • Sélectionner le texte

  • Cliquer sur le <> de l'éditeur de message

1530289742.png

comme indiqué dans le : Retour utilisable de commande

_ _ _

Autres liens :

> github.com/DIGImend/digimend-kernel-drivers/issues/26

> digimend.github.io/support

_ _ _

(Edit= messages regroupés)

Dernière modification par xubu1957 (Le 30/01/2019, à 19:21)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#3 Le 30/01/2019, à 16:31

Godri chini

Re : Tablette graphique Huion 610pro

Salut , j'ai déjà essayer tout ça , rien n'y fais , j'ai toujours qu'un petit espace de la tablette qui " fonctionne " et la sensibilité y es très forte , je n'ai pas trouvé de sujet qui fasse référence a ce problème . Je commence a ramer pour de bon

Hors ligne

#4 Le 30/01/2019, à 16:36

xubu1957

Re : Tablette graphique Huion 610pro

Tu as regardé dans les discussions > github.com/DIGImend/digimend-kernel-drivers/issues ?


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#5 Le 30/01/2019, à 16:40

Godri chini

Re : Tablette graphique Huion 610pro

Oui , après mon niveau d'anglais commence a être a la traine la .

Hors ligne

#6 Le 30/01/2019, à 16:46

xubu1957

Re : Tablette graphique Huion 610pro

Tu avais passé cette commande :

sudo apt install dkms git-core 

?

C'était sur une version 16.04 > setup-huion-giano-wh1409-tablet-on-linux-mint-18-1-ubuntu-16-04


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#7 Le 30/01/2019, à 16:55

Godri chini

Re : Tablette graphique Huion 610pro

Oui j'avais passé cette commande , je ne comprend pas ton autre question

Hors ligne

#8 Le 30/01/2019, à 16:58

xubu1957

Re : Tablette graphique Huion 610pro

Il n'y avait qu'une question relative au passage de la commande.

Le lien en exemple, au #7, concernait une version 16.04.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#9 Le 30/01/2019, à 17:47

Godri chini

Re : Tablette graphique Huion 610pro

J'ai trouvé quelque chose qui s'appelle PTXConf et qui pourrait résoudre mon problème , seulement je ne parviens pas a l'installer .

Hors ligne

#10 Le 30/01/2019, à 17:49

xubu1957

Re : Tablette graphique Huion 610pro

Avec cette Doc > wenhsinjen.github.io/ptxconf ?


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#11 Le 30/01/2019, à 17:55

Godri chini

Re : Tablette graphique Huion 610pro

Ca ne fonctionne pas ,

 sudo apt-get install xinput x11-xserver-utils
[sudo] Mot de passe de shini : 
Désolé, essayez de nouveau.
[sudo] Mot de passe de shini : 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
x11-xserver-utils est déjà la version la plus récente (7.7+7build1).
xinput est déjà la version la plus récente (1.6.2-1build1).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 21 non mis à jour.
shini@Duke:~$ $ git clone http://github.com/wenhsinjen/ptxconf.git
$ : commande introuvable
shini@Duke:~$ $ cd ptxconf
$ : commande introuvable
shini@Duke:~$ $ sudo python setup.py install^C
shini@Duke:~$ 

Hors ligne

#12 Le 30/01/2019, à 18:11

xubu1957

Re : Tablette graphique Huion 610pro

la Doc a écrit :
sudo apt-get install xinput x11-xserver-utils
sudo apt-get install python-gtk2, python-appindicator

Puis installez ce paquet,

git clone http://github.com/wenhsinjen/ptxconf.git
cd ptxconf
sudo python setup.py install

Tu avais installé :

sudo apt-get install python-gtk2, python-appindicator

?

_ _ _

21 non mis à jour
sudo apt full-upgrade

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#13 Le 30/01/2019, à 19:12

Nuliel

Re : Tablette graphique Huion 610pro

Le pilote de digimend devrait suffire.
Tu peux déjà donner

dkms status

Hors ligne

#14 Le 30/01/2019, à 21:47

Godri chini

Re : Tablette graphique Huion 610pro

digimend, 9, 4.15.0-43-generic, x86_64: installed
digimend, 9, 4.15.0-44-generic, x86_64: installed
nvidia, 390.77, 4.15.0-43-generic, x86_64: installed
nvidia, 390.77, 4.15.0-44-generic, x86_64: installed

Hors ligne

#15 Le 30/01/2019, à 22:15

Nuliel

Re : Tablette graphique Huion 610pro

Donc visiblement il est bien installé.

Tu as suivi https://forum.ubuntu-fr.org/viewtopic.p … #p21691424 ?

Hors ligne

#16 Le 31/01/2019, à 15:46

Godri chini

Re : Tablette graphique Huion 610pro

Salut , oui je l'ai fait , mon problème je pense que c'est la résolution du pad de la tablette et de l'écran sont différentes , en gros je peut bouger la souris avec la tablette mais que sur une petite partie du pad ( 10 % je dirais ) de la tablette ( qui es donc très sensible ) après par exemple si je met le stylet au milieu de la tablette mon curseur se coince  dans le coin inférieur droit de mon mon écran de droite .

shini@Duke:~$ xsetwacom --list
HID 256c:006e Pen stylus        	id: 12	type: STYLUS    
HID 256c:006e Pad pad           	id: 13	type: PAD       
shini@Duke:~$ 

Je crois que j'ai trouvé quelqu'un qui a le même problème que moi : https://ubuntuforums.org/showthread.php?t=2244678

Je ne parviens pas finaliser l'installation de PTX conf je ne comprend pas pourquoi :

shini@Duke:~$ sudo apt-get install python-gtk2, python-appindicator
[sudo] Mot de passe de shini : 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet python-gtk2,
shini@Duke:~$ sudo apt-get install python-appindicator
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
python-appindicator est déjà la version la plus récente (12.10.1+18.04.20180322.1-0ubuntu1).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 44 non mis à jour.
shini@Duke:~$ sudo apt-get install python-gtk2
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
python-gtk2 est déjà la version la plus récente (2.24.0-5.1ubuntu2).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 44 non mis à jour.
shini@Duke:~$ sudo apt-get install xinput x11-xserver-utils
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
x11-xserver-utils est déjà la version la plus récente (7.7+7build1).
xinput est déjà la version la plus récente (1.6.2-1build1).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 44 non mis à jour.
shini@Duke:~$ git clone http://github.com/wenhsinjen/ptxconf.git
fatal: le chemin de destination 'ptxconf' existe déjà et n'est pas un répertoire vide.
shini@Duke:~$ cd ptxconf
shini@Duke:~/ptxconf$ sudo python setup.py install
running install
running build
running build_py
running build_scripts
running install_lib
running install_scripts
changing mode of /usr/local/bin/ptxconf.py to 755
running install_egg_info
Removing /usr/local/lib/python2.7/dist-packages/ptxconf-0.1.0.egg-info
Writing /usr/local/lib/python2.7/dist-packages/ptxconf-0.1.0.egg-info
shini@Duke:~/ptxconf$ 
shini@Duke:~/ptxconf$ sudo pip install ptxconf
sudo: pip : commande introuvable
shini@Duke:~/ptxconf$ 

peut etre en modifiant le fichier texte qu'il y a dans mon usr/share/X11/xorg.conf.d qui es celui-ci dessous je pourrait mettre la bonne résolution ?

Section "InputClass"
    Identifier "1060plus"
    MatchProduct "1060plus"
    MatchIsTablet "on"
    MatchDevicePath "/dev/input/event*"
    Driver "wacom"
EndSection

Section "InputClass"
    Identifier "1060plus"
    MatchIsTablet "on"
    MatchDevicePath "/dev/input/event*"
    Driver "wacom"
    Option "TopX" "100"
    Option "TopY" "90"
    Option "BottomX" "17920"
    Option "BottomY" "10240"
EndSection 

Dernière modification par Godri chini (Le 31/01/2019, à 16:33)

Hors ligne

#17 Le 31/01/2019, à 19:02

Nuliel

Re : Tablette graphique Huion 610pro

Je privilégierais la modification du fichier /usr/share/X11/xorg.conf.d/52-tablet.conf afin d'ajouter

    Option "TopX" "100"
    Option "TopY" "90"
    Option "BottomX" "17920"
    Option "BottomY" "10240"

Mais il faut connaître les dimensions de la tablette.

Hors ligne

#18 Le 31/01/2019, à 20:05

Godri chini

Re : Tablette graphique Huion 610pro

10''x6.25'' c'est la dimension du pad sur la tablette , mais après je ne saurais pas pour autant la configurer notamment pour la sensibilité

j'ai trouver ca : https://github.com/linuxwacom/xf86-inpu … alibration

mais je suis pas bien sur de tout comprendre

Dernière modification par Godri chini (Le 01/02/2019, à 14:25)

Hors ligne

#19 Le 02/11/2020, à 20:17

Dieuvince

Re : Tablette graphique Huion 610pro

Bonsoir à tous !

Je me permets de réouvrir ce topic car j'ai réussi à faire reconnaître la tablette sur Ubuntu 18.04.5 mais dès que j'approche le stylet de celle-ci (dès que l'on s'en sert quoi tongue), le curseur bouge... puis la session se ferme aussitôt et retour à la souris obligatoire. Je sèche !

Si quelqu'un à une idée, je suis preneur ! Merci.

@micalement

Hors ligne

#20 Le 10/11/2020, à 10:23

Dieuvince

Re : Tablette graphique Huion 610pro

Salut les justiciers masqués ! 'ti up pour la bonne cause... big_smile

Hors ligne

#21 Le 19/11/2020, à 10:43

Dieuvince

Re : Tablette graphique Huion 610pro

One again en attendant que la bonne paire d'yeux repasse par là ! cool

Hors ligne

#22 Le 19/11/2020, à 10:50

Nuliel

Re : Tablette graphique Huion 610pro

Tu peux faire crasher ta session, te log et donner le retour de

dmesg

mais bon, ça fait penser à un pilote mal fait

Hors ligne

#23 Le 20/11/2020, à 14:25

Dieuvince

Re : Tablette graphique Huion 610pro

Yo Nuliel et merci pour ta réponse. Voici le log :

edit : pardon pour le pâté !

edit 2 : Merci Xubu !!

Dernière modification par Dieuvince (Le 20/11/2020, à 14:45)

Hors ligne

#24 Le 20/11/2020, à 14:37

xubu1957

Re : Tablette graphique Huion 610pro

Bonjour,

Comme indiqué dans le premier message du tutoriel Retour utilisable de commande.

Pour ajouter toi-même les balises code à ton précédent message #23 :             Retours supprimés dans le #23.            roll

  • Cliquer sur  le lien « Modifier » en bas à droite du message

  • Sélectionner le texte

  • Cliquer sur le <> de l'éditeur de message

1530289742.png

[    0.000000] Linux version 4.15.0-122-generic (buildd@lgw01-amd64-003) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #124-Ubuntu SMP Thu Oct 15 13:02:56 UTC 2020 (Ubuntu 4.15.0-122.124-generic 4.15.18)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfc6bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfc6c000-0x00000000bfcbefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bfcbf000-0x00000000bfd82fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfd83000-0x00000000bfdbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfdbf000-0x00000000bfde7fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfde8000-0x00000000bfdfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bfdff000-0x00000000bfdfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/30F4, BIOS F.12 08/28/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BFE00000 mask FFFE00000 uncachable
[    0.000000]   3 base 100000000 mask FC0000000 write-back
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 base 0FFF00000 mask FFFF00000 write-protect
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x073fffff]
[    0.000000] RAMDISK: [mem 0x33aa7000-0x35d4afff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HP    )
[    0.000000] ACPI: XSDT 0x00000000BFDFE120 00006C (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000BFDFC000 0000F4 (v04 HP     VADER    00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 0x00000000BFDED000 00A54F (v01 HP     VADER    00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 0x00000000BFD8C000 000040
[    0.000000] ACPI: FACS 0x00000000BFD8C000 000040
[    0.000000] ACPI: SSDT 0x00000000BFDFD000 000655 (v01 PmRef  CpuPm    00003000 INTL 20060912)
[    0.000000] ACPI: HPET 0x00000000BFDFB000 000038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 0x00000000BFDFA000 00006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 0x00000000BFDF9000 00003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: ASF! 0x00000000BFDF8000 0000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 0x00000000BFDEC000 000176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 000F4240)
[    0.000000] ACPI: BOOT 0x00000000BFDEB000 000028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 0x00000000BFDEA000 000296 (v01 INTEL  SataAhci 00001000 INTL 20060912)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 4234MB HIGHMEM available.
[    0.000000] 885MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 375fe000
[    0.000000]   low ram: 0 - 375fe000
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000375fdfff]
[    0.000000]   HighMem  [mem 0x00000000375fe000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bfc6bfff]
[    0.000000]   node   0: [mem 0x00000000bfcbf000-0x00000000bfd82fff]
[    0.000000]   node   0: [mem 0x00000000bfdbf000-0x00000000bfde7fff]
[    0.000000]   node   0: [mem 0x00000000bfdff000-0x00000000bfdfffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Reserved but unavailable: 99 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1047799
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   Normal zone: 2175 pages used for memmap
[    0.000000]   Normal zone: 222718 pages, LIFO batch:31
[    0.000000]   HighMem zone: 821084 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfc6c000-0xbfcbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfd83000-0xbfdbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfde8000-0xbfdfefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfe00000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x81/0x439 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 29 pages/cpu s89036 r0 d29748 u118784
[    0.000000] pcpu-alloc: s89036 r0 d29748 u118784 alloc=29*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1045584
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-122-generic root=UUID=dd3a40c4-1c9a-4e3c-af94-89be93ee168e ro quiet splash vt.handoff=1
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] microcode: microcode updated early to revision 0x60f, date = 2010-09-29
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000375fe:00140000)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 4031796K/4191196K available (8970K kernel code, 895K rwdata, 3456K rodata, 1112K init, 860K bss, 159400K reserved, 0K cma-reserved, 3284336K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
                 cpu_entry : 0xffa00000 - 0xffb39000   (1252 kB)
                   pkmap   : 0xff600000 - 0xff800000   (2048 kB)
                   vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
                     .init : 0xc6d1d000 - 0xc6e33000   (1112 kB)
                     .data : 0xc68c2ae0 - 0xc6d09c40   (4380 kB)
                     .text : 0xc6000000 - 0xc68c2ae0   (8970 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 38103 entries in 75 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 2304, nr_irqs: 456, preallocated irqs: 16
[    0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.032000] tsc: Unable to calibrate against PIT
[    0.032000] tsc: using HPET reference calibration
[    0.032000] tsc: Detected 2260.937 MHz processor
[    0.032000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.87 BogoMIPS (lpj=9043748)
[    0.032000] pid_max: default: 32768 minimum: 301
[    0.032000] Security Framework initialized
[    0.032000] Yama: becoming mindful.
[    0.032000] AppArmor: AppArmor initialized
[    0.032000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.032000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.032000] CPU0: Thermal monitoring enabled (TM1)
[    0.032000] process: using mwait in idle threads
[    0.032000] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.032000] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.032000] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.032000] Spectre V2 : Mitigation: Full generic retpoline
[    0.032000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.032000] Speculative Store Bypass: Vulnerable
[    0.032000] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.036286] Freeing SMP alternatives memory: 36K
[    0.153125] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz (family: 0x6, model: 0x17, stepping: 0x6)
[    0.153229] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.153237] ... version:                2
[    0.153238] ... bit width:              40
[    0.153239] ... generic registers:      2
[    0.153240] ... value mask:             000000ffffffffff
[    0.153241] ... max period:             000000007fffffff
[    0.153241] ... fixed-purpose events:   3
[    0.153242] ... event mask:             0000000700000003
[    0.153289] Hierarchical SRCU implementation.
[    0.154674] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.154695] smp: Bringing up secondary CPUs ...
[    0.154824] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.154825] x86: Booting SMP configuration:
[    0.154826] .... node  #0, CPUs:      #1
[    0.004000] Initializing CPU#1
[    0.158075] smp: Brought up 1 node, 2 CPUs
[    0.158075] smpboot: Max logical packages: 2
[    0.158075] smpboot: Total of 2 processors activated (9043.74 BogoMIPS)
[    0.161360] allocated 4194304 bytes of page_ext
[    0.161465] devtmpfs: initialized
[    0.161465] evm: security.selinux
[    0.161465] evm: security.SMACK64
[    0.161465] evm: security.SMACK64EXEC
[    0.161465] evm: security.SMACK64TRANSMUTE
[    0.161465] evm: security.SMACK64MMAP
[    0.161465] evm: security.apparmor
[    0.161465] evm: security.ima
[    0.161465] evm: security.capability
[    0.161465] PM: Registering ACPI NVS region [mem 0xbfd83000-0xbfdbefff] (245760 bytes)
[    0.161465] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.161465] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.161465] pinctrl core: initialized pinctrl subsystem
[    0.161465] RTC time: 13:06:19, date: 11/20/20
[    0.161465] NET: Registered protocol family 16
[    0.161465] audit: initializing netlink subsys (disabled)
[    0.161465] audit: type=2000 audit(1605877579.160:1): state=initialized audit_enabled=0 res=1
[    0.161465] EISA bus registered
[    0.161465] cpuidle: using governor ladder
[    0.164013] cpuidle: using governor menu
[    0.164103] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.164104] Simple Boot Flag at 0x44 set to 0x1
[    0.164117] ACPI: bus type PCI registered
[    0.164119] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.164192] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.164199] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.164199] PCI: Using MMCONFIG for extended config space
[    0.164199] PCI: Using configuration type 1 for base access
[    0.164199] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.164199] mtrr: probably your BIOS does not setup all CPUs.
[    0.164199] mtrr: corrected configuration.
[    0.166028] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.166028] ACPI: Added _OSI(Module Device)
[    0.166028] ACPI: Added _OSI(Processor Device)
[    0.166028] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.166028] ACPI: Added _OSI(Processor Aggregator Device)
[    0.166028] ACPI: Added _OSI(Linux-Dell-Video)
[    0.166028] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.166028] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.166028] ACPI: Executed 1 blocks of module-level executable AML code
[    0.168771] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.174611] ACPI: Dynamic OEM Table Load:
[    0.174618] ACPI: SSDT 0x00000000EDA80C00 000265 (v01 PmRef  Cpu0Ist  00003000 INTL 20060912)
[    0.174919] ACPI: Dynamic OEM Table Load:
[    0.174925] ACPI: SSDT 0x00000000EE00B800 000594 (v01 PmRef  Cpu0Cst  00003001 INTL 20060912)
[    0.175517] ACPI: Dynamic OEM Table Load:
[    0.175523] ACPI: SSDT 0x00000000EDA61A00 0001CF (v01 PmRef  ApIst    00003000 INTL 20060912)
[    0.175784] ACPI: Dynamic OEM Table Load:
[    0.175789] ACPI: SSDT 0x00000000EDA29300 00008D (v01 PmRef  ApCst    00003000 INTL 20060912)
[    0.176316] ACPI: EC: EC started
[    0.176317] ACPI: EC: interrupt blocked
[    0.225544] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as first EC
[    0.225546] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.225548] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions
[    0.225549] ACPI: Interpreter enabled
[    0.225585] ACPI: (supports S0 S3 S4 S5)
[    0.225586] ACPI: Using IOAPIC for interrupt routing
[    0.225620] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.225993] ACPI: Enabled 14 GPEs in block 00 to 3F
[    0.384990] ACPI: Power Resource [FN00] (on)
[    0.540402] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.540407] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.540413] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.540416] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.540984] PCI host bridge to bus 0000:00
[    0.540986] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.540988] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.540990] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.540992] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.540994] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.541004] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.541032] DMAR: Forcing write-buffer flush capability
[    0.541033] DMAR: Disabling IOMMU for graphics on this chipset
[    0.541133] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[    0.541183] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.541325] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.541404] pci 0000:00:1a.0: reg 0x20: [io  0x90e0-0x90ff]
[    0.541575] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.541650] pci 0000:00:1a.1: reg 0x20: [io  0x90c0-0x90df]
[    0.541825] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.541855] pci 0000:00:1a.7: reg 0x10: [mem 0xdf304c00-0xdf304fff]
[    0.541977] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.542091] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.542118] pci 0000:00:1b.0: reg 0x10: [mem 0xdf300000-0xdf303fff 64bit]
[    0.542215] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.542331] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.542438] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.542558] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    0.542660] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.542781] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[    0.542882] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.543006] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[    0.543112] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.543231] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[    0.543341] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.543461] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[    0.543560] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.543684] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.543760] pci 0000:00:1d.0: reg 0x20: [io  0x90a0-0x90bf]
[    0.543927] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.544008] pci 0000:00:1d.1: reg 0x20: [io  0x9080-0x909f]
[    0.544182] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.544258] pci 0000:00:1d.2: reg 0x20: [io  0x9060-0x907f]
[    0.544425] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[    0.544498] pci 0000:00:1d.3: reg 0x20: [io  0x9040-0x905f]
[    0.544655] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.544686] pci 0000:00:1d.7: reg 0x10: [mem 0xdf304800-0xdf304bff]
[    0.544807] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.544915] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.545090] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[    0.545320] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[    0.545343] pci 0000:00:1f.2: reg 0x10: [io  0x9108-0x910f]
[    0.545352] pci 0000:00:1f.2: reg 0x14: [io  0x9114-0x9117]
[    0.545361] pci 0000:00:1f.2: reg 0x18: [io  0x9100-0x9107]
[    0.545370] pci 0000:00:1f.2: reg 0x1c: [io  0x9110-0x9113]
[    0.545379] pci 0000:00:1f.2: reg 0x20: [io  0x9020-0x903f]
[    0.545389] pci 0000:00:1f.2: reg 0x24: [mem 0xdf304000-0xdf3047ff]
[    0.545444] pci 0000:00:1f.2: PME# supported from D3hot
[    0.545548] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.545572] pci 0000:00:1f.3: reg 0x10: [mem 0xdf305000-0xdf3050ff 64bit]
[    0.545598] pci 0000:00:1f.3: reg 0x20: [io  0x9000-0x901f]
[    0.545825] pci 0000:01:00.0: [10de:0649] type 00 class 0x030000
[    0.545890] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[    0.545921] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.545965] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit]
[    0.545989] pci 0000:01:00.0: reg 0x24: [io  0x8000-0x807f]
[    0.546008] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.546043] pci 0000:01:00.0: enabling Extended Tags
[    0.556045] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.556048] pci 0000:00:01.0:   bridge window [io  0x8000-0x8fff]
[    0.556051] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd2ffffff]
[    0.556055] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.556163] pci 0000:02:00.0: [8086:4237] type 00 class 0x028000
[    0.556221] pci 0000:02:00.0: reg 0x10: [mem 0xde200000-0xde201fff 64bit]
[    0.556423] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.568030] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.568034] pci 0000:00:1c.0:   bridge window [io  0x7000-0x7fff]
[    0.568038] pci 0000:00:1c.0:   bridge window [mem 0xde200000-0xdf2fffff]
[    0.568045] pci 0000:00:1c.0:   bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.568116] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.568121] pci 0000:00:1c.1:   bridge window [io  0x6000-0x6fff]
[    0.568124] pci 0000:00:1c.1:   bridge window [mem 0xdd200000-0xde1fffff]
[    0.568130] pci 0000:00:1c.1:   bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
[    0.568198] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.568202] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
[    0.568206] pci 0000:00:1c.2:   bridge window [mem 0xdc200000-0xdd1fffff]
[    0.568212] pci 0000:00:1c.2:   bridge window [mem 0xd5000000-0xd5ffffff 64bit pref]
[    0.568305] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[    0.568339] pci 0000:05:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.568370] pci 0000:05:00.0: reg 0x18: [mem 0xd6010000-0xd6010fff 64bit pref]
[    0.568391] pci 0000:05:00.0: reg 0x20: [mem 0xd6000000-0xd600ffff 64bit pref]
[    0.568404] pci 0000:05:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.568501] pci 0000:05:00.0: supports D1 D2
[    0.568503] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.580027] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.580030] pci 0000:00:1c.3:   bridge window [io  0x3000-0x4fff]
[    0.580034] pci 0000:00:1c.3:   bridge window [mem 0xdb200000-0xdc1fffff]
[    0.580040] pci 0000:00:1c.3:   bridge window [mem 0xd6000000-0xd70fffff 64bit pref]
[    0.580177] pci 0000:06:00.0: [197b:2380] type 00 class 0x0c0010
[    0.580219] pci 0000:06:00.0: reg 0x10: [mem 0xda100000-0xda1007ff]
[    0.580238] pci 0000:06:00.0: reg 0x14: [mem 0xda100d00-0xda100d7f]
[    0.580292] pci 0000:06:00.0: reg 0x20: [mem 0xda100c80-0xda100cff]
[    0.580312] pci 0000:06:00.0: reg 0x24: [mem 0xda100c00-0xda100c7f]
[    0.580524] pci 0000:06:00.1: [197b:2382] type 00 class 0x088000
[    0.580561] pci 0000:06:00.1: reg 0x10: [mem 0xda100b00-0xda100bff]
[    0.580828] pci 0000:06:00.2: [197b:2381] type 00 class 0x080501
[    0.580865] pci 0000:06:00.2: reg 0x10: [mem 0xda100a00-0xda100aff]
[    0.581131] pci 0000:06:00.3: [197b:2383] type 00 class 0x088000
[    0.581169] pci 0000:06:00.3: reg 0x10: [mem 0xda100900-0xda1009ff]
[    0.581438] pci 0000:06:00.4: [197b:2384] type 00 class 0x088000
[    0.581474] pci 0000:06:00.4: reg 0x10: [mem 0xda100800-0xda1008ff]
[    0.592032] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    0.592036] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.592040] pci 0000:00:1c.4:   bridge window [mem 0xda100000-0xdb1fffff]
[    0.592047] pci 0000:00:1c.4:   bridge window [mem 0xd7100000-0xd80fffff 64bit pref]
[    0.592117] pci 0000:00:1c.5: PCI bridge to [bus 07-09]
[    0.592121] pci 0000:00:1c.5:   bridge window [io  0x1000-0x1fff]
[    0.592125] pci 0000:00:1c.5:   bridge window [mem 0xd9100000-0xda0fffff]
[    0.592132] pci 0000:00:1c.5:   bridge window [mem 0xd8100000-0xd90fffff 64bit pref]
[    0.592220] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
[    0.592232] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.592233] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.592235] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.592237] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[    0.592287] pci_bus 0000:00: on NUMA node 0
[    0.592411] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.592493] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    0.592573] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.592652] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.592731] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[    0.592811] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[    0.592890] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[    0.592969] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.599071] ACPI: EC: interrupt unblocked
[    0.599080] ACPI: EC: event unblocked
[    0.599087] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.599089] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.599421] SCSI subsystem initialized
[    0.599457] libata version 3.00 loaded.
[    0.599457] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.599457] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.599457] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.599457] vgaarb: loaded
[    0.599457] ACPI: bus type USB registered
[    0.599457] usbcore: registered new interface driver usbfs
[    0.599457] usbcore: registered new interface driver hub
[    0.599457] usbcore: registered new device driver usb
[    0.599457] EDAC MC: Ver: 3.0.0
[    0.599457] PCI: Using ACPI for IRQ routing
[    0.601912] PCI: pci_cache_line_size set to 64 bytes
[    0.602029] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.602031] e820: reserve RAM buffer [mem 0xbfc6c000-0xbfffffff]
[    0.602033] e820: reserve RAM buffer [mem 0xbfd83000-0xbfffffff]
[    0.602034] e820: reserve RAM buffer [mem 0xbfde8000-0xbfffffff]
[    0.602036] e820: reserve RAM buffer [mem 0xbfe00000-0xbfffffff]
[    0.602167] NetLabel: Initializing
[    0.602168] NetLabel:  domain hash size = 128
[    0.602169] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.602192] NetLabel:  unlabeled traffic allowed by default
[    0.602213] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.602213] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.602213] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.605031] clocksource: Switched to clocksource hpet
[    0.621949] VFS: Disk quotas dquot_6.6.0
[    0.621977] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.622121] AppArmor: AppArmor Filesystem Enabled
[    0.622181] pnp: PnP ACPI init
[    0.748254] pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.5 BAR 13 [io  0x1000-0x1fff]
[    0.748347] system 00:00: [io  0x0600-0x060f] has been reserved
[    0.748349] system 00:00: [io  0x0610] has been reserved
[    0.748351] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.748353] system 00:00: [io  0x0810-0x0817] has been reserved
[    0.748355] system 00:00: [io  0x0820-0x0823] has been reserved
[    0.748357] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.748359] system 00:00: [io  0x0500-0x053f] has been reserved
[    0.748363] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.748365] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.748367] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.748369] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.748371] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.748373] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.748375] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.748377] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.748384] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.748436] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.748517] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.748560] pnp 00:03: Plug and Play ACPI device, IDs SYN0156 SYN0100 SYN0002 PNP0f13 (active)
[    0.748681] pnp 00:04: Plug and Play ACPI device, IDs ENE0100 (active)
[    0.748766] pnp: PnP ACPI: found 5 devices
[    0.748769] PnPBIOS: Disabled by ACPI PNP
[    0.785911] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.785917] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.785919] pci 0000:05:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.785937] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[    0.785939] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[    0.785941] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.785944] pci 0000:00:01.0:   bridge window [io  0x8000-0x8fff]
[    0.785947] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd2ffffff]
[    0.785950] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.785954] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.785956] pci 0000:00:1c.0:   bridge window [io  0x7000-0x7fff]
[    0.785961] pci 0000:00:1c.0:   bridge window [mem 0xde200000-0xdf2fffff]
[    0.785965] pci 0000:00:1c.0:   bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.785971] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.785974] pci 0000:00:1c.1:   bridge window [io  0x6000-0x6fff]
[    0.785979] pci 0000:00:1c.1:   bridge window [mem 0xdd200000-0xde1fffff]
[    0.785983] pci 0000:00:1c.1:   bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
[    0.785989] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.785992] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
[    0.785996] pci 0000:00:1c.2:   bridge window [mem 0xdc200000-0xdd1fffff]
[    0.786000] pci 0000:00:1c.2:   bridge window [mem 0xd5000000-0xd5ffffff 64bit pref]
[    0.786008] pci 0000:05:00.0: BAR 6: assigned [mem 0xdb200000-0xdb20ffff pref]
[    0.786011] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.786013] pci 0000:00:1c.3:   bridge window [io  0x3000-0x4fff]
[    0.786018] pci 0000:00:1c.3:   bridge window [mem 0xdb200000-0xdc1fffff]
[    0.786022] pci 0000:00:1c.3:   bridge window [mem 0xd6000000-0xd70fffff 64bit pref]
[    0.786029] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    0.786032] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.786037] pci 0000:00:1c.4:   bridge window [mem 0xda100000-0xdb1fffff]
[    0.786041] pci 0000:00:1c.4:   bridge window [mem 0xd7100000-0xd80fffff 64bit pref]
[    0.786047] pci 0000:00:1c.5: PCI bridge to [bus 07-09]
[    0.786050] pci 0000:00:1c.5:   bridge window [io  0x1000-0x1fff]
[    0.786055] pci 0000:00:1c.5:   bridge window [mem 0xd9100000-0xda0fffff]
[    0.786059] pci 0000:00:1c.5:   bridge window [mem 0xd8100000-0xd90fffff 64bit pref]
[    0.786065] pci 0000:00:1e.0: PCI bridge to [bus 0a]
[    0.786078] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.786079] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.786081] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.786083] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[    0.786085] pci_bus 0000:01: resource 0 [io  0x8000-0x8fff]
[    0.786086] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd2ffffff]
[    0.786088] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.786090] pci_bus 0000:02: resource 0 [io  0x7000-0x7fff]
[    0.786091] pci_bus 0000:02: resource 1 [mem 0xde200000-0xdf2fffff]
[    0.786093] pci_bus 0000:02: resource 2 [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.786094] pci_bus 0000:03: resource 0 [io  0x6000-0x6fff]
[    0.786096] pci_bus 0000:03: resource 1 [mem 0xdd200000-0xde1fffff]
[    0.786098] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd4ffffff 64bit pref]
[    0.786099] pci_bus 0000:04: resource 0 [io  0x5000-0x5fff]
[    0.786101] pci_bus 0000:04: resource 1 [mem 0xdc200000-0xdd1fffff]
[    0.786102] pci_bus 0000:04: resource 2 [mem 0xd5000000-0xd5ffffff 64bit pref]
[    0.786104] pci_bus 0000:05: resource 0 [io  0x3000-0x4fff]
[    0.786105] pci_bus 0000:05: resource 1 [mem 0xdb200000-0xdc1fffff]
[    0.786107] pci_bus 0000:05: resource 2 [mem 0xd6000000-0xd70fffff 64bit pref]
[    0.786109] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
[    0.786110] pci_bus 0000:06: resource 1 [mem 0xda100000-0xdb1fffff]
[    0.786112] pci_bus 0000:06: resource 2 [mem 0xd7100000-0xd80fffff 64bit pref]
[    0.786113] pci_bus 0000:07: resource 0 [io  0x1000-0x1fff]
[    0.786115] pci_bus 0000:07: resource 1 [mem 0xd9100000-0xda0fffff]
[    0.786116] pci_bus 0000:07: resource 2 [mem 0xd8100000-0xd90fffff 64bit pref]
[    0.786118] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7 window]
[    0.786120] pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff window]
[    0.786121] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.786123] pci_bus 0000:0a: resource 7 [mem 0xc0000000-0xfebfffff window]
[    0.786222] NET: Registered protocol family 2
[    0.786416] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.786434] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.786461] TCP: Hash tables configured (established 8192 bind 8192)
[    0.786505] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.786516] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.786568] NET: Registered protocol family 1
[    2.784017] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    4.784019] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    4.784369] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    4.784404] PCI: CLS 64 bytes, default 64
[    4.784452] Unpacking initramfs...
[    5.449915] Freeing initrd memory: 35472K
[    5.449999] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    5.450001] software IO TLB: mapped [mem 0x2e6a7000-0x326a7000] (64MB)
[    5.450229] Scanning for low memory corruption every 60 seconds
[    5.451056] Initialise system trusted keyrings
[    5.451068] Key type blacklist registered
[    5.451136] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[    5.453154] zbud: loaded
[    5.453642] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.453851] fuse init (API version 7.26)
[    5.455709] Key type asymmetric registered
[    5.455710] Asymmetric key parser 'x509' registered
[    5.455724] bounce: pool size: 64 pages
[    5.455738] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    5.455788] io scheduler noop registered
[    5.455789] io scheduler deadline registered
[    5.455860] io scheduler cfq registered (default)
[    5.456714] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
[    5.457037] pcieport 0000:00:1c.2: enabling device (0000 -> 0003)
[    5.457991] pcieport 0000:00:1c.5: enabling device (0000 -> 0003)
[    5.458416] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    5.458417] vesafb: scrolling: redraw
[    5.458419] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    5.458440] vesafb: framebuffer at 0xd1000000, mapped to 0x(ptrval), using 1216k, total 1216k
[    5.458569] Console: switching to colour frame buffer device 80x30
[    5.458584] fb0: VESA VGA frame buffer device
[    5.458610] intel_idle: does not run on family 6 model 23
[    5.600064] ACPI: AC Adapter [AC] (off-line)
[    5.600140] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    5.600152] ACPI: Power Button [PWRB]
[    5.600204] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    5.600214] ACPI: Lid Switch [LID0]
[    5.600261] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    5.600294] ACPI: Sleep Button [SLPB]
[    5.600363] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    5.600386] ACPI: Power Button [PWRF]
[    5.603727] Monitor-Mwait will be used to enter C-1 state
[    5.603745] Monitor-Mwait will be used to enter C-2 state
[    5.603762] Monitor-Mwait will be used to enter C-3 state
[    5.603771] tsc: Marking TSC unstable due to TSC halts in idle
[    5.617940] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    5.645726] thermal LNXTHERM:00: registered as thermal_zone0
[    5.645728] ACPI: Thermal Zone [THRM] (27 C)
[    5.645884] isapnp: Scanning for PnP cards...
[    5.645927] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    5.648792] Linux agpgart interface v0.103
[    5.653303] loop: module loaded
[    5.653576] libphy: Fixed MDIO Bus: probed
[    5.653577] tun: Universal TUN/TAP device driver, 1.6
[    5.653614] PPP generic driver version 2.4.2
[    5.653664] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.653667] ehci-pci: EHCI PCI platform driver
[    5.653913] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    5.653921] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    5.653934] ehci-pci 0000:00:1a.7: debug port 1
[    5.657831] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    5.657851] ehci-pci 0000:00:1a.7: irq 18, io mem 0xdf304c00
[    5.672043] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    5.672098] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.672100] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.672102] usb usb1: Product: EHCI Host Controller
[    5.672103] usb usb1: Manufacturer: Linux 4.15.0-122-generic ehci_hcd
[    5.672104] usb usb1: SerialNumber: 0000:00:1a.7
[    5.672227] hub 1-0:1.0: USB hub found
[    5.672236] hub 1-0:1.0: 4 ports detected
[    5.672620] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    5.672625] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    5.672637] ehci-pci 0000:00:1d.7: debug port 1
[    5.676539] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    5.676551] ehci-pci 0000:00:1d.7: irq 20, io mem 0xdf304800
[    5.692041] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    5.692103] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    5.692105] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.692107] usb usb2: Product: EHCI Host Controller
[    5.692108] usb usb2: Manufacturer: Linux 4.15.0-122-generic ehci_hcd
[    5.692109] usb usb2: SerialNumber: 0000:00:1d.7
[    5.692229] hub 2-0:1.0: USB hub found
[    5.692237] hub 2-0:1.0: 8 ports detected
[    5.692468] ehci-platform: EHCI generic platform driver
[    5.692486] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.692488] ohci-pci: OHCI PCI platform driver
[    5.692503] ohci-platform: OHCI generic platform driver
[    5.692513] uhci_hcd: USB Universal Host Controller Interface driver
[    5.692723] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    5.692730] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    5.692737] uhci_hcd 0000:00:1a.0: detected 2 ports
[    5.692765] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000090e0
[    5.692819] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.692821] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.692823] usb usb3: Product: UHCI Host Controller
[    5.692824] usb usb3: Manufacturer: Linux 4.15.0-122-generic uhci_hcd
[    5.692826] usb usb3: SerialNumber: 0000:00:1a.0
[    5.692938] hub 3-0:1.0: USB hub found
[    5.692946] hub 3-0:1.0: 2 ports detected
[    5.693267] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    5.693272] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    5.693279] uhci_hcd 0000:00:1a.1: detected 2 ports
[    5.693309] uhci_hcd 0000:00:1a.1: irq 17, io base 0x000090c0
[    5.693363] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    5.693365] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.693367] usb usb4: Product: UHCI Host Controller
[    5.693368] usb usb4: Manufacturer: Linux 4.15.0-122-generic uhci_hcd
[    5.693369] usb usb4: SerialNumber: 0000:00:1a.1
[    5.693484] hub 4-0:1.0: USB hub found
[    5.693491] hub 4-0:1.0: 2 ports detected
[    5.693806] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.693812] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    5.693818] uhci_hcd 0000:00:1d.0: detected 2 ports
[    5.693838] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000090a0
[    5.693892] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    5.693893] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.693895] usb usb5: Product: UHCI Host Controller
[    5.693897] usb usb5: Manufacturer: Linux 4.15.0-122-generic uhci_hcd
[    5.693898] usb usb5: SerialNumber: 0000:00:1d.0
[    5.694011] hub 5-0:1.0: USB hub found
[    5.694018] hub 5-0:1.0: 2 ports detected
[    5.694343] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.694350] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    5.694356] uhci_hcd 0000:00:1d.1: detected 2 ports
[    5.694384] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00009080
[    5.694437] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    5.694439] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.694441] usb usb6: Product: UHCI Host Controller
[    5.694442] usb usb6: Manufacturer: Linux 4.15.0-122-generic uhci_hcd
[    5.694444] usb usb6: SerialNumber: 0000:00:1d.1
[    5.694560] hub 6-0:1.0: USB hub found
[    5.694568] hub 6-0:1.0: 2 ports detected
[    5.694879] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.694885] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    5.694892] uhci_hcd 0000:00:1d.2: detected 2 ports
[    5.694913] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009060
[    5.694968] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    5.694970] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.694972] usb usb7: Product: UHCI Host Controller
[    5.694973] usb usb7: Manufacturer: Linux 4.15.0-122-generic uhci_hcd
[    5.694974] usb usb7: SerialNumber: 0000:00:1d.2
[    5.695087] hub 7-0:1.0: USB hub found
[    5.695094] hub 7-0:1.0: 2 ports detected
[    5.738820] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    5.738826] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    5.738832] uhci_hcd 0000:00:1d.3: detected 2 ports
[    5.738867] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00009040
[    5.738922] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    5.738924] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.738925] usb usb8: Product: UHCI Host Controller
[    5.738927] usb usb8: Manufacturer: Linux 4.15.0-122-generic uhci_hcd
[    5.738928] usb usb8: SerialNumber: 0000:00:1d.3
[    5.739041] hub 8-0:1.0: USB hub found
[    5.739049] hub 8-0:1.0: 2 ports detected
[    5.739243] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    5.778511] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.778550] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.778693] mousedev: PS/2 mouse device common for all mice
[    5.781358] rtc_cmos 00:01: RTC can wake from S4
[    5.781496] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    5.781525] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    5.781534] i2c /dev entries driver
[    5.781628] device-mapper: uevent: version 1.0.3
[    5.781699] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    5.781726] platform eisa.0: Probing EISA bus 0
[    5.781728] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    5.781730] platform eisa.0: Cannot allocate resource for EISA slot 1
[    5.781732] platform eisa.0: Cannot allocate resource for EISA slot 2
[    5.781733] platform eisa.0: Cannot allocate resource for EISA slot 3
[    5.781735] platform eisa.0: Cannot allocate resource for EISA slot 4
[    5.781736] platform eisa.0: Cannot allocate resource for EISA slot 5
[    5.781738] platform eisa.0: Cannot allocate resource for EISA slot 6
[    5.781739] platform eisa.0: Cannot allocate resource for EISA slot 7
[    5.781741] platform eisa.0: Cannot allocate resource for EISA slot 8
[    5.781742] platform eisa.0: EISA: Detected 0 cards
[    5.781748] cpufreq_nforce2: No nForce2 chipset
[    5.782295] ledtrig-cpu: registered to indicate activity on CPUs
[    5.782588] NET: Registered protocol family 10
[    5.788739] Segment Routing with IPv6
[    5.788769] NET: Registered protocol family 17
[    5.788820] Key type dns_resolver registered
[    5.821509] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    5.876607] mce: Using 6 MCE banks
[    5.876655] microcode: sig=0x10676, pf=0x80, revision=0x60f
[    5.876701] microcode: Microcode Update Driver: v2.2.
[    5.876705] Using IPI No-Shortcut mode
[    5.876849] registered taskstats version 1
[    5.876861] Loading compiled-in X.509 certificates
[    5.883710] Loaded X.509 cert 'Build time autogenerated kernel key: ebe3a7782c3e3aa41a8e939bf3a202cdfee04a23'
[    5.883729] zswap: loaded using pool lzo/zbud
[    5.889293] Key type big_key registered
[    5.889296] Key type trusted registered
[    5.892154] Key type encrypted registered
[    5.892156] AppArmor: AppArmor sha1 policy hashing enabled
[    5.892159] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    5.892164] ima: Allocated hash algorithm: sha1
[    5.892179] evm: HMAC attrs: 0x1
[    5.892693]   Magic number: 12:975:129
[    5.892765] acpi device:04: hash matches
[    5.892956] rtc_cmos 00:01: setting system clock to 2020-11-20 13:06:25 UTC (1605877585)
[    5.893347] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    5.893348] EDD information not available.
[    5.952512] ACPI: Battery Slot [BAT0] (battery present)
[    5.957446] isapnp: No Plug & Play device found
[    5.959159] Freeing unused kernel image memory: 1112K
[    5.976211] Write protecting the kernel text: 8972k
[    5.976287] Write protecting the kernel read-only data: 3480k
[    5.976288] NX-protecting the kernel data: 7412k
[    5.976518] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    5.976561] x86/mm: Checking user space page tables
[    5.976584] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    6.076014] random: fast init done
[    6.081949] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    6.081974] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    6.081981] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    6.232102] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[    6.433084] usb 5-2: New USB device found, idVendor=062a, idProduct=4101
[    6.433088] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.433091] usb 5-2: Product: 2.4G Keyboard Mouse
[    6.433093] usb 5-2: Manufacturer: MOSART Semi.
[    6.444369] hidraw: raw HID events driver (C) Jiri Kosina
[    6.458232] usbcore: registered new interface driver usbhid
[    6.458233] usbhid: USB HID core driver
[    6.464244] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x20970ff529a, max_idle_ns: 440795286308 ns
[    6.465272] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/0003:062A:4101.0001/input/input6
[    6.528146] hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:1d.0-2/input0
[    6.529507] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/0003:062A:4101.0002/input/input7
[    6.588294] hid-generic 0003:062A:4101.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:1d.0-2/input1
[    6.693551] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    6.693561] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[    6.694021] r8169 0000:05:00.0 eth0: RTL8168c/8111c at 0x(ptrval), 00:1e:ec:e9:e8:47, XID 1c4000c0 IRQ 19
[    6.694023] r8169 0000:05:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    6.695140] sdhci: Secure Digital Host Controller Interface driver
[    6.695141] sdhci: Copyright(c) Pierre Ossman
[    6.700967] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
[    6.701088] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    6.701224] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
[    6.701243] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[    6.701315] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[    6.712564] firewire_ohci 0000:06:00.0: overriding IsoXmitIntMask
[    6.725957] ahci 0000:00:1f.2: version 3.0
[    6.726340] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    6.726343] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs 
[    6.764338] scsi host0: ahci
[    6.764491] scsi host1: ahci
[    6.764614] scsi host2: ahci
[    6.764737] scsi host3: ahci
[    6.764862] scsi host4: ahci
[    6.764984] scsi host5: ahci
[    6.765049] ata1: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304100 irq 24
[    6.765052] ata2: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304180 irq 24
[    6.765053] ata3: DUMMY
[    6.765054] ata4: DUMMY
[    6.765056] ata5: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304300 irq 24
[    6.765058] ata6: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304380 irq 24
[    6.784993] r8169 0000:05:00.0 enp5s0: renamed from eth0
[    6.785062] firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
[    6.928098] usb 2-5: new high-speed USB device number 3 using ehci-pci
[    7.078052] ata6: SATA link down (SStatus 0 SControl 300)
[    7.090476] usb 2-5: New USB device found, idVendor=090c, idProduct=c371
[    7.090479] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.090482] usb 2-5: Product: HP Webcam
[    7.090484] usb 2-5: Manufacturer: Image Processor
[    7.236086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    7.236983] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    7.240054] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    7.244156] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    7.245218] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    7.245262] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    7.245667] ata5.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.246074] ata5.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.246077] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    7.246647] ata5.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.247099] ata5.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.247102] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SC04, max UDMA/100
[    7.252676] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    7.253157] ata5.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.253654] ata5.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.253657] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    7.254131] ata5.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.254628] ata5.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.254634] ata5.00: configured for UDMA/100
[    7.292182] firewire_core 0000:06:00.0: created device fw0: GUID 8a3f0200190c41d9, S400
[    7.383922] ata1.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.392229] ata2.00: ACPI cmd ef/10:01:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.531825] ata1.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.531828] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    7.540977] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.540980] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 (SET FEATURES) filtered out
[    7.679734] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.688157] ata2.00: ACPI cmd ef/10:04:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.827645] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.827650] ata1.00: ATA-8: ST9250827AS, 3.AHC, max UDMA/100
[    7.827653] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    7.828447] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    7.835948] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.835953] ata2.00: ATA-8: ST9250827AS, 3.AHC, max UDMA/100
[    7.835955] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    7.836767] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    7.975556] ata1.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.983852] ata2.00: ACPI cmd ef/10:01:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    8.125573] ata1.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    8.125576] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    8.131759] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    8.131763] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 (SET FEATURES) filtered out
[    8.222323] psmouse serio1: synaptics: queried max coordinates: x [..5608], y [..4638]
[    8.272515] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    8.279664] ata2.00: ACPI cmd ef/10:04:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    8.323076] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04751/0xa00000/0x20000/0x0, board id: 0, fw id: 509933
[    8.420425] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    8.420432] ata1.00: configured for UDMA/100
[    8.420685] scsi 0:0:0:0: Direct-Access     ATA      ST9250827AS      C    PQ: 0 ANSI: 5
[    8.421008] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.421154] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    8.421172] sd 0:0:0:0: [sda] Write Protect is off
[    8.421174] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    8.421202] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.427570] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    8.427579] ata2.00: configured for UDMA/100
[    8.427782] scsi 1:0:0:0: Direct-Access     ATA      ST9250827AS      C    PQ: 0 ANSI: 5
[    8.428041] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    8.428184] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    8.428200] sd 1:0:0:0: [sdb] Write Protect is off
[    8.428202] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    8.428229] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.431216] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50L  SC04 PQ: 0 ANSI: 5
[    8.447755] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[    8.570365]  sdb: sdb1 sdb2
[    8.570839] sd 1:0:0:0: [sdb] Attached SCSI disk
[    8.595139] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    8.595141] cdrom: Uniform CD-ROM driver Revision: 3.20
[    8.595335] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    8.595408] sr 4:0:0:0: Attached scsi generic sg2 type 5
[    8.599141]  sda: sda1 sda2 < sda5 >
[    8.599681] sd 0:0:0:0: [sda] Attached SCSI disk
[    9.629477] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   10.312442] random: crng init done
[   10.312445] random: 7 urandom warning(s) missed due to ratelimiting
[   11.781534] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.933090] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   11.952248] systemd[1]: Detected architecture x86.
[   11.970303] systemd[1]: Set hostname to <pipoune87-HP-Pavilion-dv7-Notebook-PC>.
[   14.994633] systemd[1]: Created slice User and Session Slice.
[   14.994708] systemd[1]: Reached target User and Group Name Lookups.
[   14.994737] systemd[1]: Reached target Remote File Systems.
[   14.994826] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   14.995052] systemd[1]: Created slice System Slice.
[   14.995170] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   14.995355] systemd[1]: Listening on Journal Audit Socket.
[   15.358466] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   15.586413] systemd-journald[266]: Received request to flush runtime journal from PID 1
[   15.832911] lp: driver loaded but no devices found
[   15.942529] ppdev: user-space parallel port driver
[   29.558015] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[   29.580722] ACPI: Video Device [EVGA] (multi-head: yes  rom: no  post: no)
[   29.625734] acpi device:06: registered as cooling_device3
[   29.625804] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input9
[   29.630550] hp_accel: hardware type DV7 found
[   29.631184] lis3lv02d: 8 bits sensor found
[   29.647414] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0
[   29.647416] ene_ir: PLL freq = 1406
[   29.647417] ene_ir: KB3926C detected
[   29.647430] ene_ir: Firmware regs: c0 00
[   29.647431] ene_ir: Hardware features:
[   29.647432] ene_ir: * Uses GPIO 40 for IR demodulated input
[   29.661055] lirc_dev: IR Remote Control driver registered, major 244
[   29.665624] IR LIRC bridge handler initialized
[   29.690282] audit: type=1400 audit(1605877609.292:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=414 comm="apparmor_parser"
[   29.690286] audit: type=1400 audit(1605877609.292:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=414 comm="apparmor_parser"
[   29.690288] audit: type=1400 audit(1605877609.292:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=414 comm="apparmor_parser"
[   29.690291] audit: type=1400 audit(1605877609.292:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=414 comm="apparmor_parser"
[   29.697934] audit: type=1400 audit(1605877609.300:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=413 comm="apparmor_parser"
[   29.697937] audit: type=1400 audit(1605877609.300:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=413 comm="apparmor_parser"
[   29.700799] audit: type=1400 audit(1605877609.304:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=417 comm="apparmor_parser"
[   29.700803] audit: type=1400 audit(1605877609.304:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=417 comm="apparmor_parser"
[   29.700806] audit: type=1400 audit(1605877609.304:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=417 comm="apparmor_parser"
[   29.702614] audit: type=1400 audit(1605877609.304:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=418 comm="apparmor_parser"
[   29.708185] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input11
[   29.712030] Registered IR keymap rc-rc6-mce
[   29.726217] IR RC6 protocol handler initialized
[   29.752269] rc rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[   29.752325] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input10
[   29.756494] lirc lirc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[   29.756517] ene_ir: driver has been successfully loaded
[   29.774299] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   29.928931] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20170831/utaddress-247)
[   29.928938] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20170831/utaddress-247)
[   29.928942] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   29.928945] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170831/utaddress-247)
[   29.928948] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170831/utaddress-247)
[   29.928952] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   29.928953] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170831/utaddress-247)
[   29.928956] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170831/utaddress-247)
[   29.928959] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   29.928960] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   30.003633] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   30.033613] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   30.078083] Intel(R) Wireless WiFi driver for Linux
[   30.078085] Copyright(c) 2003- 2015 Intel Corporation
[   30.078308] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   30.199278] media: Linux media interface: v0.10
[   30.214714] Linux video capture interface: v2.00
[   30.328904] uvcvideo: Found UVC 1.00 device HP Webcam (090c:c371)
[   30.338255] uvcvideo 2-5:1.0: Entity type for entity Processing 3 was not initialized!
[   30.338259] uvcvideo 2-5:1.0: Entity type for entity Extension 2 was not initialized!
[   30.338261] uvcvideo 2-5:1.0: Entity type for entity Camera 1 was not initialized!
[   30.338368] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input12
[   30.338548] usbcore: registered new interface driver uvcvideo
[   30.338549] USB Video Class driver (1.1.1)
[   30.348432] kvm: disabled by bios
[   30.425548] kvm: disabled by bios
[   30.428413] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
[   30.481536] intel_powerclamp: No package C-state available
[   30.490442] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD71B7X: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   30.490445] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   30.490447] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   30.490449] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   30.490450] snd_hda_codec_idt hdaudioC0D0:    dig-out=0x1e/0x0
[   30.490452] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   30.490454] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x18
[   30.490456] snd_hda_codec_idt hdaudioC0D0:      Mic=0xb
[   30.495674] checking generic (d1000000 130000) vs hw (c0000000 10000000)
[   30.495675] checking generic (d1000000 130000) vs hw (d0000000 2000000)
[   30.495676] fb: switching to nouveaufb from VESA VGA
[   30.495716] Console: switching to colour dummy device 80x25
[   30.496333] nouveau 0000:01:00.0: NVIDIA G96 (096480a1)
[   30.499381] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   30.499383] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   30.499385] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   30.499387] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[   30.554886] nouveau 0000:01:00.0: bios: version 62.94.1b.00.06
[   30.561771] intel_powerclamp: No package C-state available
[   30.576509] nouveau 0000:01:00.0: bios: M0203T not found
[   30.576511] nouveau 0000:01:00.0: bios: M0203E not matched!
[   30.576514] nouveau 0000:01:00.0: fb: 512 MiB DDR2
[   30.637291] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   30.637624] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   30.639141] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   30.690765] [TTM] Zone  kernel: Available graphics memory: 392040 kiB
[   30.690767] [TTM] Zone highmem: Available graphics memory: 2034208 kiB
[   30.690769] [TTM] Initializing pool allocator
[   30.690774] [TTM] Initializing DMA pool allocator
[   30.690800] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB
[   30.690801] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[   30.690806] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[   30.690807] nouveau 0000:01:00.0: DRM: DCB version 4.0
[   30.690810] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000323 00010034
[   30.690812] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011300 00000028
[   30.690814] nouveau 0000:01:00.0: DRM: DCB outp 02: 02032332 00020010
[   30.690816] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000040
[   30.690818] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
[   30.690820] nouveau 0000:01:00.0: DRM: DCB conn 02: 00001261
[   30.693350] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   30.693351] [drm] Driver supports precise vblank timestamp query.
[   30.695787] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies
[   30.752753] input: HP WMI hotkeys as /devices/virtual/input/input15
[   30.753994] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio.
[   30.753996] iwlwifi 0000:02:00.0: reporting RF_KILL (radio disabled)
[   30.770754] nouveau 0000:01:00.0: DRM: allocated 1440x900 fb: 0x70000, bo 2f9420b2
[   30.770829] fbcon: nouveaufb (fb0) is primary device
[   30.770968] Console: switching to colour frame buffer device 180x56
[   30.771008] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[   30.780242] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[   30.890964] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[   30.929735] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[   30.929738] iwlwifi 0000:02:00.0: reporting RF_KILL (radio enabled)
[   33.539236] Adding 4189180k swap on /dev/sda5.  Priority:-2 extents:1 across:4189180k FS
[   34.152103] usb 5-1: new full-speed USB device number 3 using uhci_hcd
[   34.370087] usb 5-1: New USB device found, idVendor=256c, idProduct=006d
[   34.370091] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   34.370093] usb 5-1: Product: Huion Tablet
[   34.370096] usb 5-1: Manufacturer: HUION
[   34.396910] hid-generic 0003:256C:006D.0003: hiddev1,hidraw2: USB HID v1.11 Device [HUION Huion Tablet] on usb-0000:00:1d.0-1/input0
[   34.435360] input: HUION Huion Tablet as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/0003:256C:006D.0004/input/input16
[   34.435488] hid-generic 0003:256C:006D.0004: input,hidraw3: USB HID v1.11 Device [HUION Huion Tablet] on usb-0000:00:1d.0-1/input1
[   48.946610] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[   48.988124] r8169 0000:05:00.0 enp5s0: link down
[   48.988218] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[   48.993624] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   49.002913] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   49.124404] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   49.156728] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   49.421244] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   52.571612] wlp2s0: authenticate with f4:ca:e5:ab:eb:28
[   52.575142] wlp2s0: send auth to f4:ca:e5:ab:eb:28 (try 1/3)
[   52.577612] wlp2s0: authenticated
[   52.577869] wlp2s0: waiting for beacon from f4:ca:e5:ab:eb:28
[   52.628048] wlp2s0: associate with f4:ca:e5:ab:eb:28 (try 1/3)
[   52.631794] wlp2s0: RX AssocResp from f4:ca:e5:ab:eb:28 (capab=0x411 status=0 aid=2)
[   52.635351] wlp2s0: associated
[   52.698186] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   61.740712] CE: hpet increased min_delta_ns to 20115 nsec
[  435.369500] rfkill: input handler disabled
[  447.970613] show_signal_msg: 41 callbacks suppressed
[  447.970616] gnome-shell[1570]: segfault at 0 ip b6b6f376 sp bfb3f848 error 4 in libc-2.27.so[b6ad8000+1d5000]
[  449.886184] nouveau 0000:01:00.0: Direct firmware load for nouveau/nv84_xuc00f failed with error -2
[  449.886188] nouveau 0000:01:00.0: vp: unable to load firmware nouveau/nv84_xuc00f
[  449.886190] nouveau 0000:01:00.0: vp: init failed, -2
[  449.886215] nouveau 0000:01:00.0: Direct firmware load for nouveau/nv84_xuc103 failed with error -2
[  449.886217] nouveau 0000:01:00.0: bsp: unable to load firmware nouveau/nv84_xuc103
[  449.886218] nouveau 0000:01:00.0: bsp: init failed, -2
[  460.586695] usb 5-1: input irq status -75 received
[  460.704050] usb usb5-port1: disabled by hub (EMI?), re-enabling...
[  460.704057] usb 5-1: USB disconnect, device number 3
[  461.008060] usb 5-1: new full-speed USB device number 4 using uhci_hcd
[  461.315714] usb 5-1: New USB device found, idVendor=256c, idProduct=006d
[  461.315717] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  461.315718] usb 5-1: Product: Huion Tablet
[  461.315720] usb 5-1: Manufacturer: HUION
[  461.342334] hid-generic 0003:256C:006D.0005: hiddev1,hidraw2: USB HID v1.11 Device [HUION Huion Tablet] on usb-0000:00:1d.0-1/input0
[  461.387051] input: HUION Huion Tablet as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/0003:256C:006D.0006/input/input17
[  461.444374] hid-generic 0003:256C:006D.0006: input,hidraw3: USB HID v1.11 Device [HUION Huion Tablet] on usb-0000:00:1d.0-1/input1
[  462.270686] usb 5-1: input irq status -75 received
[  462.440052] usb usb5-port1: disabled by hub (EMI?), re-enabling...
[  462.440060] usb 5-1: USB disconnect, device number 4
[  462.740027] usb 5-1: new full-speed USB device number 5 using uhci_hcd
[  463.050690] usb 5-1: New USB device found, idVendor=256c, idProduct=006d
[  463.050694] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  463.050695] usb 5-1: Product: Huion Tablet
[  463.050697] usb 5-1: Manufacturer: HUION
[  463.078361] hid-generic 0003:256C:006D.0007: hiddev1,hidraw2: USB HID v1.11 Device [HUION Huion Tablet] on usb-0000:00:1d.0-1/input0
[  463.123147] input: HUION Huion Tablet as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/0003:256C:006D.0008/input/input18
[  463.180362] hid-generic 0003:256C:006D.0008: input,hidraw3: USB HID v1.11 Device [HUION Huion Tablet] on usb-0000:00:1d.0-1/input1
[  484.137395] gnome-shell[2070]: segfault at 0 ip b6b60376 sp bfbb63b8 error 4 in libc-2.27.so[b6ac9000+1d5000]
[  484.462801] rfkill: input handler enabled
[  502.457387] rfkill: input handler disabled
[  507.149462] nouveau 0000:01:00.0: Direct firmware load for nouveau/nv84_xuc00f failed with error -2
[  507.149467] nouveau 0000:01:00.0: vp: unable to load firmware nouveau/nv84_xuc00f
[  507.149470] nouveau 0000:01:00.0: vp: init failed, -2
[  507.149502] nouveau 0000:01:00.0: Direct firmware load for nouveau/nv84_xuc103 failed with error -2
[  507.149505] nouveau 0000:01:00.0: bsp: unable to load firmware nouveau/nv84_xuc103
[  507.149506] nouveau 0000:01:00.0: bsp: init failed, -2

Dernière modification par xubu1957 (Le 20/11/2020, à 20:35)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#25 Le 21/11/2020, à 12:09

Nuliel

Re : Tablette graphique Huion 610pro

Arf, gnome-shell qui crashe sans préciser pourquoi...

Tu peux donner

cat /etc/default/grub
bootctl

Tu as une session wayland ou X11? C'est lorsque tu te logues que tu as le choix.

Dernière modification par Nuliel (Le 21/11/2020, à 12:16)

Hors ligne