#1 Le 16/06/2019, à 16:11
- Ekel
[Résolu] Clef USB passée subitement en lecture seule uniquement.
Bonjour,
Je ne peux pas dire quand, ni comment, ni pourquoi... cette clef USB servait uniquement de support pour la lecture de musiques dans la voiture. Aucune donnée importante donc.
J'ai lu ce fil avant de créer le mien : https://forum.kubuntu-fr.org/viewtopic.php?id=2041056
Comme pour son auteur, ma clef ne peut plus être formatée sous aucun système d'exploitation.
Je n'ai pas le souvenir d'avoir "mal débranché" cette clef sous un système ou un autre.
Je n'ai que peu d'espoir de la récupérer, mais qui sait.
Je fournis donc les résulatst des manipulations proposées moko138 et geole dans le fil pré-cité.
La commande
mount -l | tail -5
donne
/dev/sdc1 on /home4 type ext4 (rw,relatime) [WD FlightGear]
/dev/sdd1 on /home2 type ext4 (rw,relatime) [Maxtor]
/dev/sda6 on /home type ext4 (rw,relatime,stripe=32738)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=1229464k,mode=700,uid=1000,gid=1000)
/dev/sde1 on /media/ekel/KINGSTON type vfat (ro,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro,uhelper=udisks2) [KINGSTON]
La commande
sudo lsblk -o name,fstype,label,size,mountpoint | grep -v loop
donne
[sudo] Mot de passe de ekel :
NAME FSTYPE LABEL SIZE MOUNTPOINT
sda 465,8G
├─sda1 swap 953M [SWAP]
├─sda2 1K
├─sda5 ext4 185,4G /
└─sda6 ext4 279,4G /home
sdb 149,1G
└─sdb1 ext4 149,1G /home3
sdc 149,1G
└─sdc1 ext4 WD FlightGear 149G /home4
sdd 189,9G
└─sdd1 ext4 Maxtor 189,9G /home2
sde 7,3G
└─sde1 vfat KINGSTON 7,3G /media/ekel/KINGSTON
sr0 1024M
sr1 1024M
La commande
dmesg | grep -i usb | tail -25
donne
[ 2.616037] usb 4-5: new full-speed USB device number 2 using ohci-pci
[ 2.817139] usb 4-5: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.03
[ 2.817141] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.817142] usb 4-5: Product: USB Receiver
[ 2.817143] usb 4-5: Manufacturer: Logitech
[ 2.836668] logitech-djreceiver 0003:046D:C52B.0004: hiddev1,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-5/input2
[ 2.959568] input: Logitech Unifying Device. Wireless PID:4004 Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.2/0003:046D:C52B.0004/0003:046D:4004.0005/input/input6
[ 2.959647] input: Logitech Unifying Device. Wireless PID:4004 Consumer Control as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.2/0003:046D:C52B.0004/0003:046D:4004.0005/input/input7
[ 2.959690] input: Logitech Unifying Device. Wireless PID:4004 System Control as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.2/0003:046D:C52B.0004/0003:046D:4004.0005/input/input8
[ 2.959736] hid-generic 0003:046D:4004.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4004] on usb-0000:00:12.0-5:1
[ 3.147255] input: Logitech K360 as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.2/0003:046D:C52B.0004/0003:046D:4004.0005/input/input12
[ 3.147327] logitech-hidpp-device 0003:046D:4004.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K360] on usb-0000:00:12.0-5:1
[ 15.239047] input: sonixj as /devices/pci0000:00/0000:00:05.0/0000:02:00.0/usb8/8-2/input/input22
[ 15.239184] usbcore: registered new interface driver sonixj
[ 16.102153] usbcore: registered new interface driver snd-usb-audio
[ 2969.478829] usb 3-1: new high-speed USB device number 3 using ehci-pci
[ 2969.644251] usb 3-1: New USB device found, idVendor=0951, idProduct=1665, bcdDevice= 1.00
[ 2969.644255] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2969.644257] usb 3-1: Product: DataTraveler 2.0
[ 2969.644258] usb 3-1: Manufacturer: Kingston
[ 2969.644259] usb 3-1: SerialNumber: 0018F3C1E35FBE8149060656
[ 2969.680297] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 2969.680482] scsi host10: usb-storage 3-1:1.0
[ 2969.680613] usbcore: registered new interface driver usb-storage
[ 2969.682556] usbcore: registered new interface driver uas
La commande
sudo blkid -p /dev/sd? ; sudo lsblk -o name,fstype,label,size,mountpoint | grep -Ev "loop|sda"; echo; ls -l /dev/disk/by-id | grep -Ev "sda|Reader" | tr -s " " | awk '{print $9,$11}' | sort -k2 | column -s" " -t
donne
Reader" | tr -s " " | awk '{print $9,$11}' | sort -k2 | column -s" " -t
/dev/sda: PTUUID="0009532f" PTTYPE="dos"
/dev/sdb: PTUUID="b6a2401d" PTTYPE="dos"
/dev/sdc: PTUUID="a1965110" PTTYPE="dos"
/dev/sdd: PTUUID="f8b1f8b1" PTTYPE="dos"
/dev/sde: PTUUID="96d3b788" PTTYPE="dos"
NAME FSTYPE LABEL SIZE MOUNTPOINT
sdb 149,1G
└─sdb1 ext4 149,1G /home3
sdc 149,1G
└─sdc1 ext4 WD FlightGear 149G /home4
sdd 189,9G
└─sdd1 ext4 Maxtor 189,9G /home2
sde 7,3G
└─sde1 vfat KINGSTON 7,3G /media/ekel/KINGSTON
sr0 1024M
sr1 1024M
ata-WDC_WD1600AAJS-00B4A0_WD-WMAT22547657 ../../sdb
wwn-0x50014ee0ab90b64b ../../sdb
ata-WDC_WD1600AAJS-00B4A0_WD-WMAT22547657-part1 ../../sdb1
wwn-0x50014ee0ab90b64b-part1 ../../sdb1
ata-WDC_WD1600BB-55GUC0_WD-WCAL94278907 ../../sdc
ata-WDC_WD1600BB-55GUC0_WD-WCAL94278907-part1 ../../sdc1
ata-Maxtor_6L200P0_L41GF6BH ../../sdd
ata-Maxtor_6L200P0_L41GF6BH-part1 ../../sdd1
usb-Kingston_DataTraveler_2.0_0018F3C1E35FBE8149060656-0:0 ../../sde
usb-Kingston_DataTraveler_2.0_0018F3C1E35FBE8149060656-0:0-part1 ../../sde1
ata-Optiarc_DVD_RW_AD-7280S ../../sr1
La commande
tail -n +7 /etc/fstab
donne
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdc5 during installation
UUID=39787500-ef14-4f0a-bc28-91f728673e05 / ext4 errors=remount-ro 0 1
# /home was on /dev/sdc6 during installation
UUID=08ab5ef5-8204-4ded-920a-6337bcec9da6 /home ext4 defaults 0 2
# /home2 was on /dev/sdb1 during installation
UUID=0ef8dc09-c2d0-4a13-8c5e-c8a613e012e4 /home2 ext4 defaults 0 2
# /home3 was on /dev/sdd1 during installation
UUID=f7436ff4-1c17-4c3c-bf07-d860500aae68 /home3 ext4 defaults 0 2
# /home4 was on /dev/sda1 during installation
UUID=c276e3a5-0836-421b-b4b4-22440158b138 /home4 ext4 defaults 0 2
# swap was on /dev/sdc1 during installation
UUID=70e2e438-9917-4f2b-af99-bbb29df0d887 none swap sw 0 0
# mon disuqe freebox
#//192.168.2.254/Disque\040dur /media/freebox cifs _netdev,rw,users,iocharset=utf8,uid=1000,sec=none,file_mode=0777,dir_mode=0777, vers=1.0 0 0
//mafreebox.freebox.fr/Disque\040dur /media/freebox cifs _netdev,rw,users,iocharset=utf8,uid=1000,sec=none,file_mode=0777,dir_mode=0777, vers=1.0 0 0
La commande
sudo umount -v /dev/sde ; sudo mkdir -v /tmp/C ; echo; sudo mount -v -t auto -o rw /dev/sde /tmp/C ; echo; mount -l | tail -1; echo; dmesg | grep -i usb | tail -18
donne
umount: /dev/sde : non monté.
mkdir: création du répertoire '/tmp/C'
mount: /tmp/C : /dev/sde déjà monté ou point de montage actif.
/dev/sde1 on /media/ekel/KINGSTON type vfat (ro,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro,uhelper=udisks2) [KINGSTON]
[ 2.959647] input: Logitech Unifying Device. Wireless PID:4004 Consumer Control as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.2/0003:046D:C52B.0004/0003:046D:4004.0005/input/input7
[ 2.959690] input: Logitech Unifying Device. Wireless PID:4004 System Control as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.2/0003:046D:C52B.0004/0003:046D:4004.0005/input/input8
[ 2.959736] hid-generic 0003:046D:4004.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4004] on usb-0000:00:12.0-5:1
[ 3.147255] input: Logitech K360 as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.2/0003:046D:C52B.0004/0003:046D:4004.0005/input/input12
[ 3.147327] logitech-hidpp-device 0003:046D:4004.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K360] on usb-0000:00:12.0-5:1
[ 15.239047] input: sonixj as /devices/pci0000:00/0000:00:05.0/0000:02:00.0/usb8/8-2/input/input22
[ 15.239184] usbcore: registered new interface driver sonixj
[ 16.102153] usbcore: registered new interface driver snd-usb-audio
[ 2969.478829] usb 3-1: new high-speed USB device number 3 using ehci-pci
[ 2969.644251] usb 3-1: New USB device found, idVendor=0951, idProduct=1665, bcdDevice= 1.00
[ 2969.644255] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2969.644257] usb 3-1: Product: DataTraveler 2.0
[ 2969.644258] usb 3-1: Manufacturer: Kingston
[ 2969.644259] usb 3-1: SerialNumber: 0018F3C1E35FBE8149060656
[ 2969.680297] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 2969.680482] scsi host10: usb-storage 3-1:1.0
[ 2969.680613] usbcore: registered new interface driver usb-storage
[ 2969.682556] usbcore: registered new interface driver uas
ekel@KUbuntu:~$ sudo dd if=/dev/sdc count=1 2>/dev/null | hexdump -C
00000000 33 c0 8e d0 bc 00 7c fb 50 07 50 1f fc be 1b 7c |3.....|.P.P....||
00000010 bf 1b 06 50 57 b9 e5 01 f3 a4 cb bd be 07 b1 04 |...PW...........|
00000020 38 6e 00 7c 09 75 13 83 c5 10 e2 f4 cd 18 8b f5 |8n.|.u..........|
00000030 83 c6 10 49 74 19 38 2c 74 f6 a0 b5 07 b4 07 8b |...It.8,t.......|
00000040 f0 ac 3c 00 74 fc bb 07 00 b4 0e cd 10 eb f2 88 |..<.t...........|
00000050 4e 10 e8 46 00 73 2a fe 46 10 80 7e 04 0b 74 0b |N..F.s*.F..~..t.|
00000060 80 7e 04 0c 74 05 a0 b6 07 75 d2 80 46 02 06 83 |.~..t....u..F...|
00000070 46 08 06 83 56 0a 00 e8 21 00 73 05 a0 b6 07 eb |F...V...!.s.....|
00000080 bc 81 3e fe 7d 55 aa 74 0b 80 7e 10 00 74 c8 a0 |..>.}U.t..~..t..|
00000090 b7 07 eb a9 8b fc 1e 57 8b f5 cb bf 05 00 8a 56 |.......W.......V|
000000a0 00 b4 08 cd 13 72 23 8a c1 24 3f 98 8a de 8a fc |.....r#..$?.....|
000000b0 43 f7 e3 8b d1 86 d6 b1 06 d2 ee 42 f7 e2 39 56 |C..........B..9V|
000000c0 0a 77 23 72 05 39 46 08 73 1c b8 01 02 bb 00 7c |.w#r.9F.s......||
000000d0 8b 4e 02 8b 56 00 cd 13 73 51 4f 74 4e 32 e4 8a |.N..V...sQOtN2..|
000000e0 56 00 cd 13 eb e4 8a 56 00 60 bb aa 55 b4 41 cd |V......V.`..U.A.|
000000f0 13 72 36 81 fb 55 aa 75 30 f6 c1 01 74 2b 61 60 |.r6..U.u0...t+a`|
00000100 6a 00 6a 00 ff 76 0a ff 76 08 6a 00 68 00 7c 6a |j.j..v..v.j.h.|j|
00000110 01 6a 10 b4 42 8b f4 cd 13 61 61 73 0e 4f 74 0b |.j..B....aas.Ot.|
00000120 32 e4 8a 56 00 cd 13 eb d6 61 f9 c3 54 61 62 6c |2..V.....a..Tabl|
00000130 65 20 64 65 20 70 61 72 74 69 74 69 6f 6e 20 6e |e de partition n|
00000140 6f 6e 20 76 61 6c 69 64 65 00 45 72 72 65 75 72 |on valide.Erreur|
00000150 20 6c 6f 72 73 20 64 75 20 63 68 61 72 67 65 6d | lors du chargem|
00000160 65 6e 74 20 64 75 20 73 79 73 74 8a 6d 65 20 64 |ent du syst.me d|
00000170 27 65 78 70 6c 6f 69 74 61 74 69 00 53 79 73 74 |'exploitati.Syst|
00000180 8a 6d 65 20 64 27 65 78 70 6c 6f 69 74 61 74 69 |.me d'exploitati|
00000190 6f 6e 20 61 62 73 65 6e 74 00 00 00 00 00 00 00 |on absent.......|
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001b0 00 00 00 00 00 2c 4a 7c 10 51 96 a1 00 00 00 20 |.....,J|.Q..... |
000001c0 21 00 83 fe ff ff 00 08 00 00 00 80 a1 12 00 00 |!...............|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
J'attends vos commentaires, suggestions ou questions.
Cordialement.
Dernière modification par Ekel (Le 01/11/2020, à 06:54)
Ekel
---
Jammy Jellyfish - KUbuntu Utilisateur n°16275
AMD Ryzen 5 5600G | B550 GAMING X V2 | 16 Go | 22" + 22"
Hors ligne
#2 Le 16/06/2019, à 18:18
- Zakhar
Re : [Résolu] Clef USB passée subitement en lecture seule uniquement.
La dernière commande te dit que ta clé est montée.
Ça donne quoi de lister les fichiers qu'elle contient ?
Sinon, ce genre de chose est souvent signe d'une défaillance hardware. Vu que ce n'est que 8G, tu as intérêt sauvegarder ailleurs dès que tu arrive à monter en lecture.
"A computer is like air conditioning: it becomes useless when you open windows." (Linus Torvald)
Hors ligne