Plus de bluetooth

Djioliat · Le 27/06/2019, à 12:17

Coucou

J’ai encore le même soucis que sur l’autre pc ACER après l’installation ubuntu c’est a dire plus de Bluetooth.

Je trouve ça quand même bizarre et dommage que ubuntu engendre le même problème sur différent pc.

ro@root:~$ uname -a; lspci -nnk | grep -iA3 net; lsusb; dmesg | grep -i bluetooth; dmesg | grep -i firmware; lsmod | grep bluetooth
Linux root 4.18.0-24-generic #25~18.04.1-Ubuntu SMP Thu Jun 20 11:13:08 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
02:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
	Subsystem: Hewlett-Packard Company U98Z062.12 802.11bgn Wireless Half-size Mini PCIe Card [103c:3040]
	Kernel driver in use: ath9k
	Kernel modules: ath9k
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
	Subsystem: Hewlett-Packard Company RTL810xE PCI Express Fast Ethernet controller [103c:306a]
	Kernel driver in use: r8169
	Kernel modules: r8169
Bus 002 Device 003: ID 0408:0f41 Quanta Computer, Inc. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 248a:00da  
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[    0.069226] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.093714] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    1.012151] [Firmware Bug]: Invalid critical threshold (0)
ro@root:~$ sudo service bluetooth status
[sudo] Mot de passe de ro : 
● bluetooth.service - Bluetooth service
   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset
   Active: inactive (dead)
     Docs: man:bluetoothd(8)
lines 1-4/4 (END)

xubu1957 · Le 27/06/2019, à 12:20

Bonjour,

Tu peux fournir :

rfkill list all

?

Djioliat · Le 27/06/2019, à 12:21

ro@root:~$ rfkill list all
0: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no
1: hp-wifi: Wireless LAN
	Soft blocked: no
	Hard blocked: no
ro@root:~$

xubu1957 · Le 27/06/2019, à 12:24

Je ne vois pas de Bluetooth et :

bluetooth.service - Bluetooth service
   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset
   Active: inactive (dead)

inactive

Le bluetooth a fonctionné sur cet ordi ?

La carte wifi Qualcomm Atheros AR9285 ne gère pas le bluetooth.

Djioliat · Le 27/06/2019, à 12:27

Oui le bluetooth fonctionné sous windows.

xubu1957 · Le 27/06/2019, à 12:31

Tu as un dual-boot avec Windows sur cet ordi ?

_ _ _

Dernière modification par xubu1957 (Le 27/06/2019, à 12:39)

Djioliat · Le 27/06/2019, à 12:38

xubu1957 a écrit :

Tu as un dual-boot avec Windows sur cet ordi ?

Non

xubu1957 · Le 27/06/2019, à 12:40

Essaye pour voir :

sudo modprobe ath3k

> askubuntu.com/questions/957071/atheros-ar9285-bluetooth-dual-mode-not-working-on-lubuntu-16-04

Djioliat · Le 27/06/2019, à 12:44

ro@root:~$ sudo modprobe ath3k
[sudo] Mot de passe de ro : 
ro@root:~$

Djioliat · Le 27/06/2019, à 12:45

Les bluetooth s'on faché contre moi

Nuliel · Le 27/06/2019, à 12:58

Il y a un problème avec le nom j'ai l'impression: en recherchant avec l'id du périphérique, on a https://wikidevi.com/wiki/Atheros_AR5B195 et non AR9285

Djioliat · Le 27/06/2019, à 13:00

Naziel a écrit :

Il y a un problème avec le nom j'ai l'impression: en recherchant avec l'id du périphérique, on a https://wikidevi.com/wiki/Atheros_AR5B195 et non AR9285

Bonjour Naziel, alors la .......je capte pas trop.
Le nom de carte réseaux ?

xubu1957 · Le 27/06/2019, à 13:03

Une réponse avec :

sudo rfkill unblock bluetooth && rfkill list bluetooth

?

Djioliat · Le 27/06/2019, à 13:05

Non

ro@root:~$ sudo rfkill unblock bluetooth && rfkill list bluetooth
[sudo] Mot de passe de ro : 
ro@root:~$

Nuliel · Le 27/06/2019, à 13:05

En fait, la carte Qualcomm Atheros AR9285 est une carte wifi qui ne contient pas de partie bluetooth, mais en recherchant à partir de son id (168c:002b), on tombe sur une carte qui fait bluetooth et wifi et qui s'appelle AR5B195 et qui n'est ni plus ni moins que la carte précédente auquel on a ajouté une partie bluetooth

Ca permet en fait de cibler les recherches

Tu peux donner

dmesg

Dernière modification par Nuliel (Le 27/06/2019, à 13:11)

xubu1957 · Le 27/06/2019, à 13:14

@Naziel

> bugs.launchpad.net/ubuntu/+source/linux-hwe/+bug/1718010 Atheros AR9285 bluetooth in HP Probook 4330s not working

Djioliat · Le 27/06/2019, à 13:15

ro@root:~$ sudo rfkill unblock bluetooth && rfkill list bluetooth
[sudo] Mot de passe de ro : 
ro@root:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.000000] Linux version 4.18.0-24-generic (buildd@lgw01-amd64-048) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #25~18.04.1-Ubuntu SMP Thu Jun 20 11:13:08 UTC 2019 (Ubuntu 4.18.0-24.25~18.04.1-generic 4.18.20)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-24-generic root=UUID=cb4b2d34-a815-43cf-afeb-bf7629b845fc ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bde60fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bde61000-0x00000000bdebefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bdebf000-0x00000000bdf81fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bdf82000-0x00000000bdfbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bdfbf000-0x00000000bdfe1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bdfe2000-0x00000000bdff6fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bdff7000-0x00000000bdffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Hewlett-Packard HP G61 Notebook PC/306A, BIOS F.20 10/13/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0FFF00000 mask FFFF00000 write-protect
[    0.000000]   3 base 0BE000000 mask FFE000000 uncachable
[    0.000000]   4 base 100000000 mask FC0000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] last_pfn = 0xbe000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[    0.000000] BRK [0xa5363000, 0xa5363fff] PGTABLE
[    0.000000] BRK [0xa5364000, 0xa5364fff] PGTABLE
[    0.000000] BRK [0xa5365000, 0xa5365fff] PGTABLE
[    0.000000] BRK [0xa5366000, 0xa5366fff] PGTABLE
[    0.000000] BRK [0xa5367000, 0xa5367fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x333bd000-0x359d5fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x00000000BDFF6120 000064 (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000BDFF5000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 0x00000000BDFE5000 00BF10 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 0x00000000BDF8F000 000040
[    0.000000] ACPI: FACS 0x00000000BDF8F000 000040
[    0.000000] ACPI: HPET 0x00000000BDFF4000 000038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 0x00000000BDFF3000 00006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 0x00000000BDFF2000 00003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: ASF! 0x00000000BDFF1000 0000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 0x00000000BDFE4000 000176 (v01 HPQOEM SLIC-MPC 06040000  LTP 00000001)
[    0.000000] ACPI: BOOT 0x00000000BDFE3000 000028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 0x00000000BDFE2000 000655 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13ffd2000-0x13fffcfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bde60fff]
[    0.000000]   node   0: [mem 0x00000000bdebf000-0x00000000bdf81fff]
[    0.000000]   node   0: [mem 0x00000000bdfbf000-0x00000000bdfe1fff]
[    0.000000]   node   0: [mem 0x00000000bdff7000-0x00000000bdffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Reserved but unavailable: 8467 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1040109
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12094 pages used for memmap
[    0.000000]   DMA32 zone: 773968 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbde61000-0xbdebefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdf82000-0xbdfbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdfe2000-0xbdff6fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.000000] [mem 0xc0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x55a with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1023834
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-24-generic root=UUID=cb4b2d34-a815-43cf-afeb-bf7629b845fc ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3960780K/4160436K available (12300K kernel code, 2633K rwdata, 4380K rodata, 2464K init, 2340K bss, 199656K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 40828 entries in 160 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180531
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 2094.803 MHz processor
[    0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e32032477a, max_idle_ns: 440795292379 ns
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.60 BogoMIPS (lpj=8379212)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.028470] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.029678] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.029756] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.029796] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.030179] mce: CPU supports 6 MCE banks
[    0.030190] CPU0: Thermal monitoring enabled (TM2)
[    0.030193] process: using mwait in idle threads
[    0.030200] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.030201] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.030204] Spectre V2 : Mitigation: Full generic retpoline
[    0.030205] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.030206] Speculative Store Bypass: Vulnerable
[    0.030254] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.030410] Freeing SMP alternatives memory: 36K
[    0.040000] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU       T4300  @ 2.10GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.040000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.040000] ... version:                2
[    0.040000] ... bit width:              40
[    0.040000] ... generic registers:      2
[    0.040000] ... value mask:             000000ffffffffff
[    0.040000] ... max period:             000000007fffffff
[    0.040000] ... fixed-purpose events:   3
[    0.040000] ... event mask:             0000000700000003
[    0.040000] Hierarchical SRCU implementation.
[    0.040000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.040000] smp: Bringing up secondary CPUs ...
[    0.040000] x86: Booting SMP configuration:
[    0.040000] .... node  #0, CPUs:      #1
[    0.042046] smp: Brought up 1 node, 2 CPUs
[    0.042046] smpboot: Max logical packages: 2
[    0.042046] smpboot: Total of 2 processors activated (8379.21 BogoMIPS)
[    0.044296] devtmpfs: initialized
[    0.044296] x86/mm: Memory block size: 128MB
[    0.044879] PM: Registering ACPI NVS region [mem 0xbdf82000-0xbdfbefff] (249856 bytes)
[    0.044879] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.044879] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.044879] pinctrl core: initialized pinctrl subsystem
[    0.044879] RTC time: 10:35:09, date: 06/27/19
[    0.044879] NET: Registered protocol family 16
[    0.044879] audit: initializing netlink subsys (disabled)
[    0.044879] audit: type=2000 audit(1561631709.044:1): state=initialized audit_enabled=0 res=1
[    0.044879] cpuidle: using governor ladder
[    0.044879] cpuidle: using governor menu
[    0.044879] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.044879] Simple Boot Flag at 0x44 set to 0x1
[    0.044879] ACPI: bus type PCI registered
[    0.044879] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.044879] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.044879] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.044879] PCI: Using configuration type 1 for base access
[    0.044879] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.044879] mtrr: probably your BIOS does not setup all CPUs.
[    0.044879] mtrr: corrected configuration.
[    0.048801] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.048801] ACPI: Added _OSI(Module Device)
[    0.048801] ACPI: Added _OSI(Processor Device)
[    0.048801] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.048801] ACPI: Added _OSI(Processor Aggregator Device)
[    0.048801] ACPI: Added _OSI(Linux-Dell-Video)
[    0.048801] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.065141] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.069226] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.070002] ACPI: Dynamic OEM Table Load:
[    0.070011] ACPI: SSDT 0xFFFF92CDFA651C00 000223 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.070643] ACPI: Dynamic OEM Table Load:
[    0.070650] ACPI: SSDT 0xFFFF92CDFA547800 0005B3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.071714] ACPI: Dynamic OEM Table Load:
[    0.071721] ACPI: SSDT 0xFFFF92CDFA5CF200 0001CF (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.072189] ACPI: Dynamic OEM Table Load:
[    0.072195] ACPI: SSDT 0xFFFF92CDFA5F1B40 00008D (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.072896] ACPI: EC: EC started
[    0.072897] ACPI: EC: interrupt blocked
[    0.078588] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as first EC
[    0.078591] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.078593] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions
[    0.078594] ACPI: Interpreter enabled
[    0.078636] ACPI: (supports S0 S3 S4 S5)
[    0.078638] ACPI: Using IOAPIC for interrupt routing
[    0.078686] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.079058] ACPI: Enabled 12 GPEs in block 00 to 3F
[    0.093229] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.093238] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.093471] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug LTR]
[    0.093688] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.093714] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.094632] PCI host bridge to bus 0000:00
[    0.094636] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.094638] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.094640] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.094642] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.094644] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.094656] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.094689] DMAR: Forcing write-buffer flush capability
[    0.094690] DMAR: Disabling IOMMU for graphics on this chipset
[    0.094817] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[    0.094872] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.095035] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.095097] pci 0000:00:1a.0: reg 0x20: [io  0x50e0-0x50ff]
[    0.095280] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.095334] pci 0000:00:1a.1: reg 0x20: [io  0x50c0-0x50df]
[    0.095517] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.101627] pci 0000:00:1a.7: reg 0x10: [mem 0xd7005c00-0xd7005fff]
[    0.120047] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.120185] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.120210] pci 0000:00:1b.0: reg 0x10: [mem 0xd7000000-0xd7003fff 64bit]
[    0.120296] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.120424] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.120515] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.120656] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    0.120747] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.120898] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.120967] pci 0000:00:1d.0: reg 0x20: [io  0x50a0-0x50bf]
[    0.121147] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.121215] pci 0000:00:1d.1: reg 0x20: [io  0x5080-0x509f]
[    0.121390] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.121454] pci 0000:00:1d.2: reg 0x20: [io  0x5060-0x507f]
[    0.121628] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[    0.121688] pci 0000:00:1d.3: reg 0x20: [io  0x5040-0x505f]
[    0.121861] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.129622] pci 0000:00:1d.7: reg 0x10: [mem 0xd7005800-0xd7005bff]
[    0.148047] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.148179] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.148368] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[    0.148602] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[    0.148624] pci 0000:00:1f.2: reg 0x10: [io  0x5108-0x510f]
[    0.148633] pci 0000:00:1f.2: reg 0x14: [io  0x5114-0x5117]
[    0.148642] pci 0000:00:1f.2: reg 0x18: [io  0x5100-0x5107]
[    0.148651] pci 0000:00:1f.2: reg 0x1c: [io  0x5110-0x5113]
[    0.148659] pci 0000:00:1f.2: reg 0x20: [io  0x5020-0x503f]
[    0.148668] pci 0000:00:1f.2: reg 0x24: [mem 0xd7005000-0xd70057ff]
[    0.148720] pci 0000:00:1f.2: PME# supported from D3hot
[    0.148846] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.148868] pci 0000:00:1f.3: reg 0x10: [mem 0xd7006000-0xd70060ff 64bit]
[    0.148892] pci 0000:00:1f.3: reg 0x20: [io  0x5000-0x501f]
[    0.149027] pci 0000:00:1f.6: [8086:2932] type 00 class 0x118000
[    0.149058] pci 0000:00:1f.6: reg 0x10: [mem 0xd7004000-0xd7004fff 64bit]
[    0.152004] pci 0000:01:00.0: [10de:06ef] type 00 class 0x030000
[    0.152044] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[    0.152067] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.152091] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit]
[    0.152106] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.152122] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.152135] pci 0000:01:00.0: enabling Extended Tags
[    0.152361] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.152364] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.152367] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd2ffffff]
[    0.152372] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.152449] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[    0.152496] pci 0000:02:00.0: reg 0x10: [mem 0xd6000000-0xd600ffff 64bit]
[    0.152655] pci 0000:02:00.0: supports D1
[    0.152657] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.152804] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.152808] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.152812] pci 0000:00:1c.0:   bridge window [mem 0xd6000000-0xd6ffffff]
[    0.152818] pci 0000:00:1c.0:   bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.152907] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.152938] pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.152969] pci 0000:03:00.0: reg 0x18: [mem 0xd4010000-0xd4010fff 64bit pref]
[    0.152988] pci 0000:03:00.0: reg 0x20: [mem 0xd4000000-0xd400ffff 64bit pref]
[    0.153002] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.153093] pci 0000:03:00.0: supports D1 D2
[    0.153095] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.153233] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.153238] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.153242] pci 0000:00:1c.1:   bridge window [mem 0xd5000000-0xd5ffffff]
[    0.153248] pci 0000:00:1c.1:   bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
[    0.153268] pci_bus 0000:04: extended config space not accessible
[    0.153335] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.153346] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.153348] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.153350] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.153352] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[    0.153571] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.153699] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[    0.153825] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.153951] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.154078] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[    0.154204] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[    0.154329] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[    0.154455] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.156268] ACPI: EC: interrupt unblocked
[    0.156292] ACPI: EC: event unblocked
[    0.156301] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.156303] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.156707] SCSI subsystem initialized
[    0.156731] libata version 3.00 loaded.
[    0.156731] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.156731] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.156731] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.156731] vgaarb: loaded
[    0.156731] ACPI: bus type USB registered
[    0.156731] usbcore: registered new interface driver usbfs
[    0.156731] usbcore: registered new interface driver hub
[    0.156731] usbcore: registered new device driver usb
[    0.156731] pps_core: LinuxPPS API ver. 1 registered
[    0.156731] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.156731] PTP clock support registered
[    0.156731] EDAC MC: Ver: 3.0.0
[    0.156731] PCI: Using ACPI for IRQ routing
[    0.157787] PCI: pci_cache_line_size set to 64 bytes
[    0.157862] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.157864] e820: reserve RAM buffer [mem 0xbde61000-0xbfffffff]
[    0.157866] e820: reserve RAM buffer [mem 0xbdf82000-0xbfffffff]
[    0.157867] e820: reserve RAM buffer [mem 0xbdfe2000-0xbfffffff]
[    0.157868] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
[    0.158036] NetLabel: Initializing
[    0.158037] NetLabel:  domain hash size = 128
[    0.158038] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.158062] NetLabel:  unlabeled traffic allowed by default
[    0.158088] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.158088] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.158088] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.160043] clocksource: Switched to clocksource tsc-early
[    0.182479] VFS: Disk quotas dquot_6.6.0
[    0.182504] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.182701] AppArmor: AppArmor Filesystem Enabled
[    0.182754] pnp: PnP ACPI init
[    0.182896] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.182904] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.183763] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.183767] system 00:01: [io  0x0600-0x060f] has been reserved
[    0.183769] system 00:01: [io  0x0610] has been reserved
[    0.183772] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.183774] system 00:01: [io  0x0810-0x0817] has been reserved
[    0.183776] system 00:01: [io  0x0820-0x0823] has been reserved
[    0.183779] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.183781] system 00:01: [io  0x0500-0x053f] has been reserved
[    0.183784] system 00:01: [io  0x0380-0x0387] has been reserved
[    0.183787] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.183789] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.183792] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.183794] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.183797] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.183800] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.183802] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.183804] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.183807] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.183809] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.183816] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.183886] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.183997] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.184055] pnp 00:04: Plug and Play ACPI device, IDs SYN1e08 SYN1e00 SYN0002 PNP0f13 (active)
[    0.184418] pnp: PnP ACPI: found 5 devices
[    0.191135] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.191143] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.191147] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.191193] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00020000 pref]
[    0.191195] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
[    0.191198] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.191201] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.191205] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd2ffffff]
[    0.191208] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.191213] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.191216] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.191221] pci 0000:00:1c.0:   bridge window [mem 0xd6000000-0xd6ffffff]
[    0.191225] pci 0000:00:1c.0:   bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.191233] pci 0000:03:00.0: BAR 6: assigned [mem 0xd5000000-0xd500ffff pref]
[    0.191236] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.191239] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.191243] pci 0000:00:1c.1:   bridge window [mem 0xd5000000-0xd5ffffff]
[    0.191247] pci 0000:00:1c.1:   bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
[    0.191254] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.191266] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.191269] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.191271] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.191273] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[    0.191275] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.191277] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd2ffffff]
[    0.191279] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.191281] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.191283] pci_bus 0000:02: resource 1 [mem 0xd6000000-0xd6ffffff]
[    0.191285] pci_bus 0000:02: resource 2 [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.191287] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.191289] pci_bus 0000:03: resource 1 [mem 0xd5000000-0xd5ffffff]
[    0.191291] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd4ffffff 64bit pref]
[    0.191293] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.191295] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.191297] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.191299] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfebfffff window]
[    0.191474] NET: Registered protocol family 2
[    0.191829] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    0.191859] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.191982] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.192184] TCP: Hash tables configured (established 32768 bind 32768)
[    0.192295] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.192341] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.192457] NET: Registered protocol family 1
[    0.192465] NET: Registered protocol family 44
[    0.216970] pci 0000:00:1a.7: quirk_usb_early_handoff+0x0/0x6c0 took 22735 usecs
[    0.240963] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x6c0 took 21445 usecs
[    0.241006] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.241020] PCI: CLS 64 bytes, default 64
[    0.241090] Unpacking initramfs...
[    0.999964] Freeing initrd memory: 39012K
[    1.000028] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.000032] software IO TLB [mem 0xb9e61000-0xbde61000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[    1.000249] Scanning for low memory corruption every 60 seconds
[    1.001148] Initialise system trusted keyrings
[    1.001160] Key type blacklist registered
[    1.001244] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.003658] zbud: loaded
[    1.004480] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.004831] fuse init (API version 7.27)
[    1.004929] pstore: using deflate compression
[    1.006659] Key type asymmetric registered
[    1.006662] Asymmetric key parser 'x509' registered
[    1.006751] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.006795] io scheduler noop registered
[    1.006796] io scheduler deadline registered
[    1.006845] io scheduler cfq registered (default)
[    1.008278] pcieport 0000:00:01.0: Signaling PME with IRQ 24
[    1.008316] pcieport 0000:00:1c.0: Signaling PME with IRQ 25
[    1.008345] pcieport 0000:00:1c.1: Signaling PME with IRQ 26
[    1.008386] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.008488] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    1.008489] vesafb: scrolling: redraw
[    1.008491] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.008508] vesafb: framebuffer at 0xd1000000, mapped to 0x(____ptrval____), using 1216k, total 1216k
[    1.008658] Console: switching to colour frame buffer device 80x30
[    1.008674] fb0: VESA VGA frame buffer device
[    1.008701] intel_idle: does not run on family 6 model 23
[    1.010096] ACPI: AC Adapter [ACAD] (on-line)
[    1.010188] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.010198] ACPI: Power Button [PWRB]
[    1.010257] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.010265] ACPI: Lid Switch [LID0]
[    1.010313] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.010327] ACPI: Sleep Button [SLPB]
[    1.010396] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.010417] ACPI: Power Button [PWRF]
[    1.010663] Monitor-Mwait will be used to enter C-1 state
[    1.010668] Monitor-Mwait will be used to enter C-2 state
[    1.010672] Monitor-Mwait will be used to enter C-3 state
[    1.010675] tsc: Marking TSC unstable due to TSC halts in idle
[    1.010777] clocksource: Switched to clocksource hpet
[    1.012151] [Firmware Bug]: Invalid critical threshold (0)
[    1.015096] thermal LNXTHERM:00: registered as thermal_zone0
[    1.015098] ACPI: Thermal Zone [TZ01] (62 C)
[    1.015477] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.020940] Linux agpgart interface v0.103
[    1.023647] loop: module loaded
[    1.023980] libphy: Fixed MDIO Bus: probed
[    1.023982] tun: Universal TUN/TAP device driver, 1.6
[    1.024177] PPP generic driver version 2.4.2
[    1.024263] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.024268] ehci-pci: EHCI PCI platform driver
[    1.024670] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.024679] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.024694] ehci-pci 0000:00:1a.7: debug port 1
[    1.028612] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.028638] ehci-pci 0000:00:1a.7: irq 19, io mem 0xd7005c00
[    1.044050] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.044117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    1.044120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.044122] usb usb1: Product: EHCI Host Controller
[    1.044124] usb usb1: Manufacturer: Linux 4.18.0-24-generic ehci_hcd
[    1.044126] usb usb1: SerialNumber: 0000:00:1a.7
[    1.044323] hub 1-0:1.0: USB hub found
[    1.044332] hub 1-0:1.0: 4 ports detected
[    1.044882] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.044890] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.044904] ehci-pci 0000:00:1d.7: debug port 1
[    1.048812] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.048831] ehci-pci 0000:00:1d.7: irq 20, io mem 0xd7005800
[    1.064049] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.064132] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    1.064134] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.064136] usb usb2: Product: EHCI Host Controller
[    1.064138] usb usb2: Manufacturer: Linux 4.18.0-24-generic ehci_hcd
[    1.064140] usb usb2: SerialNumber: 0000:00:1d.7
[    1.064319] hub 2-0:1.0: USB hub found
[    1.064327] hub 2-0:1.0: 8 ports detected
[    1.064651] ehci-platform: EHCI generic platform driver
[    1.064686] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.064691] ohci-pci: OHCI PCI platform driver
[    1.064710] ohci-platform: OHCI generic platform driver
[    1.064723] uhci_hcd: USB Universal Host Controller Interface driver
[    1.065039] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.065050] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.065058] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.065092] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050e0
[    1.065158] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    1.065160] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.065162] usb usb3: Product: UHCI Host Controller
[    1.065164] usb usb3: Manufacturer: Linux 4.18.0-24-generic uhci_hcd
[    1.065166] usb usb3: SerialNumber: 0000:00:1a.0
[    1.065329] hub 3-0:1.0: USB hub found
[    1.065337] hub 3-0:1.0: 2 ports detected
[    1.065783] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.065789] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.065797] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.065829] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050c0
[    1.065902] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    1.065904] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.065906] usb usb4: Product: UHCI Host Controller
[    1.065908] usb usb4: Manufacturer: Linux 4.18.0-24-generic uhci_hcd
[    1.065910] usb usb4: SerialNumber: 0000:00:1a.1
[    1.066074] hub 4-0:1.0: USB hub found
[    1.066082] hub 4-0:1.0: 2 ports detected
[    1.066496] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.066507] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.066515] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.066538] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000050a0
[    1.066600] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    1.066602] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.066604] usb usb5: Product: UHCI Host Controller
[    1.066606] usb usb5: Manufacturer: Linux 4.18.0-24-generic uhci_hcd
[    1.066608] usb usb5: SerialNumber: 0000:00:1d.0
[    1.066765] hub 5-0:1.0: USB hub found
[    1.066776] hub 5-0:1.0: 2 ports detected
[    1.067180] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.067188] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.067196] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.067226] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
[    1.067289] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    1.067291] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.067293] usb usb6: Product: UHCI Host Controller
[    1.067295] usb usb6: Manufacturer: Linux 4.18.0-24-generic uhci_hcd
[    1.067297] usb usb6: SerialNumber: 0000:00:1d.1
[    1.067446] hub 6-0:1.0: USB hub found
[    1.067454] hub 6-0:1.0: 2 ports detected
[    1.067860] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.067869] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    1.067877] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.067908] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00005060
[    1.067974] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    1.067976] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.067978] usb usb7: Product: UHCI Host Controller
[    1.067980] usb usb7: Manufacturer: Linux 4.18.0-24-generic uhci_hcd
[    1.067982] usb usb7: SerialNumber: 0000:00:1d.2
[    1.068178] hub 7-0:1.0: USB hub found
[    1.068186] hub 7-0:1.0: 2 ports detected
[    1.068661] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.068668] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    1.068678] uhci_hcd 0000:00:1d.3: detected 2 ports
[    1.068719] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00005040
[    1.068786] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    1.068788] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.068790] usb usb8: Product: UHCI Host Controller
[    1.068792] usb usb8: Manufacturer: Linux 4.18.0-24-generic uhci_hcd
[    1.068794] usb usb8: SerialNumber: 0000:00:1d.3
[    1.068955] hub 8-0:1.0: USB hub found
[    1.068963] hub 8-0:1.0: 2 ports detected
[    1.069184] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    1.089189] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.089195] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.089395] mousedev: PS/2 mouse device common for all mice
[    1.090286] rtc_cmos 00:02: RTC can wake from S4
[    1.090457] rtc_cmos 00:02: registered as rtc0
[    1.090482] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.090492] i2c /dev entries driver
[    1.090582] device-mapper: uevent: version 1.0.3
[    1.090689] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    1.090731] ledtrig-cpu: registered to indicate activity on CPUs
[    1.091314] NET: Registered protocol family 10
[    1.098280] Segment Routing with IPv6
[    1.098317] NET: Registered protocol family 17
[    1.098388] Key type dns_resolver registered
[    1.098643] RAS: Correctable Errors collector initialized.
[    1.098696] microcode: sig=0x1067a, pf=0x80, revision=0xa0b
[    1.098762] microcode: Microcode Update Driver: v2.2.
[    1.098973] registered taskstats version 1
[    1.098989] Loading compiled-in X.509 certificates
[    1.102545] ACPI: Battery Slot [BAT0] (battery present)
[    1.104673] Loaded X.509 cert 'Build time autogenerated kernel key: b4f1227d818ae1fdb27d90aa3a3cf27c6387fcc8'
[    1.104714] zswap: loaded using pool lzo/zbud
[    1.110995] Key type big_key registered
[    1.111001] Key type trusted registered
[    1.111903] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.115205] Key type encrypted registered
[    1.115210] AppArmor: AppArmor sha1 policy hashing enabled
[    1.115221] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.115229] ima: Allocated hash algorithm: sha1
[    1.115260] evm: Initialising EVM extended attributes:
[    1.115262] evm: security.selinux
[    1.115262] evm: security.SMACK64
[    1.115263] evm: security.SMACK64EXEC
[    1.115264] evm: security.SMACK64TRANSMUTE
[    1.115265] evm: security.SMACK64MMAP
[    1.115266] evm: security.apparmor
[    1.115267] evm: security.ima
[    1.115267] evm: security.capability
[    1.115269] evm: HMAC attrs: 0x1
[    1.115786]   Magic number: 7:119:579
[    1.115873] pci_bus 0000:00: hash matches
[    1.115975] rtc_cmos 00:02: setting system clock to 2019-06-27 10:35:10 UTC (1561631710)
[    1.116643] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[    1.122327] Freeing unused kernel image memory: 2464K
[    1.132108] Write protecting the kernel read-only data: 20480k
[    1.133453] Freeing unused kernel image memory: 2008K
[    1.134470] Freeing unused kernel image memory: 1764K
[    1.151131] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.151133] x86/mm: Checking user space page tables
[    1.166640] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.357950] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.358569] r8169 0000:03:00.0 eth0: RTL8102e, 00:26:9e:d3:9f:1b, XID 24c00000, IRQ 27
[    1.380869] ahci 0000:00:1f.2: version 3.0
[    1.385746] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.385789] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    1.385793] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs 
[    1.425324] scsi host0: ahci
[    1.432187] scsi host1: ahci
[    1.436893] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    1.438507] scsi host2: ahci
[    1.440047] scsi host3: ahci
[    1.440319] scsi host4: ahci
[    1.440466] scsi host5: ahci
[    1.440543] ata1: SATA max UDMA/133 abar m2048@0xd7005000 port 0xd7005100 irq 28
[    1.440546] ata2: SATA max UDMA/133 abar m2048@0xd7005000 port 0xd7005180 irq 28
[    1.440547] ata3: DUMMY
[    1.440548] ata4: DUMMY
[    1.440551] ata5: SATA max UDMA/133 abar m2048@0xd7005000 port 0xd7005300 irq 28
[    1.440553] ata6: SATA max UDMA/133 abar m2048@0xd7005000 port 0xd7005380 irq 28
[    1.556477] random: fast init done
[    1.816032] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[    1.916037] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.918473] ata1.00: ATA-8: WDC WD3200BEVT-60ZCT1, 13.01A13, max UDMA/100
[    1.918475] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    1.920248] ata1.00: configured for UDMA/100
[    1.930682] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-6 1A13 PQ: 0 ANSI: 5
[    1.930883] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.930909] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.930914] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.931022] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.931221] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.931241] sd 0:0:0:0: [sda] Write Protect is off
[    1.931244] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.931276] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.983979]  sda: sda1
[    1.984406] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.303872] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0/0x0, board id: 0, fw id: 428212
[    2.304047] usb 2-4: new high-speed USB device number 3 using ehci-pci
[    2.372960] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    2.408041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.410987] ata2.00: ATAPI: hp      DVDRAM GT30L, mP04, max UDMA/100
[    2.415623] ata2.00: configured for UDMA/100
[    2.429673] scsi 1:0:0:0: CD-ROM            hp       DVDRAM GT30L     mP04 PQ: 0 ANSI: 5
[    2.436073] usb 5-1: New USB device found, idVendor=248a, idProduct=00da, bcdDevice= 1.00
[    2.436075] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.436077] usb 5-1: Product: Wireless Receiver
[    2.436079] usb 5-1: Manufacturer: Telink
[    2.444838] hidraw: raw HID events driver (C) Jiri Kosina
[    2.456325] usbcore: registered new interface driver usbhid
[    2.456327] usbhid: USB HID core driver
[    2.461691] input: Telink Wireless Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:248A:00DA.0001/input/input7
[    2.462186] input: Telink Wireless Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:248A:00DA.0001/input/input8
[    2.478899] usb 2-4: New USB device found, idVendor=0408, idProduct=0f41, bcdDevice= 1.03
[    2.478902] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    2.478904] usb 2-4: Product: HP Webcam-101
[    2.478906] usb 2-4: Manufacturer: SN001
[    2.478908] usb 2-4: SerialNumber: QCM
[    2.487638] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.487640] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.487848] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.487962] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.520197] input: Telink Wireless Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:248A:00DA.0001/input/input9
[    2.520334] hid-generic 0003:248A:00DA.0001: input,hidraw0: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:00:1d.0-1/input0
[    2.520689] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/0003:248A:00DA.0002/input/input10
[    2.580190] hid-generic 0003:248A:00DA.0002: input,hidraw1: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:1d.0-1/input1
[    2.810928] ata5: SATA link down (SStatus 0 SControl 300)
[    3.126947] ata6: SATA link down (SStatus 0 SControl 300)
[    3.607923] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.140825] random: crng init done
[    5.140828] random: 7 urandom warning(s) missed due to ratelimiting
[    5.941099] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.960135] systemd[1]: Detected architecture x86-64.
[    5.975944] systemd[1]: Set hostname to <root>.
[    9.173961] systemd[1]: Created slice User and Session Slice.
[    9.174072] systemd[1]: Reached target Remote File Systems.
[    9.174352] systemd[1]: Created slice System Slice.
[    9.174614] systemd[1]: Listening on Journal Audit Socket.
[    9.174725] systemd[1]: Listening on fsck to fsckd communication Socket.
[    9.174847] systemd[1]: Listening on Journal Socket (/dev/log).
[    9.174976] systemd[1]: Listening on udev Control Socket.
[   10.213669] lp: driver loaded but no devices found
[   10.288343] ppdev: user-space parallel port driver
[   10.382070] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   10.674912] systemd-journald[241]: Received request to flush runtime journal from PID 1
[   10.910862] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k FS
[   28.190879] audit: type=1400 audit(1561631737.568:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=393 comm="apparmor_parser"
[   28.190886] audit: type=1400 audit(1561631737.568:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=393 comm="apparmor_parser"
[   28.190889] audit: type=1400 audit(1561631737.568:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=393 comm="apparmor_parser"
[   28.190892] audit: type=1400 audit(1561631737.568:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=393 comm="apparmor_parser"
[   28.206411] audit: type=1400 audit(1561631737.584:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=397 comm="apparmor_parser"
[   28.206416] audit: type=1400 audit(1561631737.584:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=397 comm="apparmor_parser"
[   28.206419] audit: type=1400 audit(1561631737.584:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=397 comm="apparmor_parser"
[   28.215039] audit: type=1400 audit(1561631737.592:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=398 comm="apparmor_parser"
[   28.218433] audit: type=1400 audit(1561631737.596:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=394 comm="apparmor_parser"
[   28.218438] audit: type=1400 audit(1561631737.596:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=394 comm="apparmor_parser"
[   28.523947] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   28.530234] acpi device:07: registered as cooling_device2
[   28.530332] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input11
[   28.594924] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   28.606515] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   29.193580] intel_powerclamp: No package C-state available
[   29.224482] intel_powerclamp: No package C-state available
[   30.335967] media: Linux media interface: v0.10
[   30.395170] videodev: Linux video capture interface: v2.00
[   30.808358] ath: phy0: Enable LNA combining
[   30.810970] ath: phy0: ASPM enabled: 0x43
[   30.810974] ath: EEPROM regdomain: 0x6a
[   30.810975] ath: EEPROM indicates we should expect a direct regpair map
[   30.810978] ath: Country alpha2 being used: 00
[   30.810979] ath: Regpair used: 0x6a
[   30.894981] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   30.895708] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffa8b3c0a60000, irq=16
[   30.973195] gpio_ich: GPIO from 451 to 511 on gpio_ich
[   31.000445] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[   31.143742] hp_wmi: query 0xd returned error 0x5
[   31.143820] input: HP WMI hotkeys as /devices/virtual/input/input12
[   31.394601] uvcvideo: Found UVC 1.00 device HP Webcam-101 (0408:0f41)
[   31.404830] uvcvideo 2-4:1.0: Entity type for entity Extension 5 was not initialized!
[   31.404834] uvcvideo 2-4:1.0: Entity type for entity Extension 4 was not initialized!
[   31.404836] uvcvideo 2-4:1.0: Entity type for entity Processing 3 was not initialized!
[   31.404839] uvcvideo 2-4:1.0: Entity type for entity Camera 1 was not initialized!
[   31.404958] input: HP Webcam-101: HP Webcam-101 as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input13
[   31.405086] usbcore: registered new interface driver uvcvideo
[   31.405088] USB Video Class driver (1.1.1)
[   31.920266] checking generic (d1000000 130000) vs hw (c0000000 10000000)
[   31.920269] checking generic (d1000000 130000) vs hw (d0000000 2000000)
[   31.920270] fb: switching to nouveaufb from VESA VGA
[   31.920358] Console: switching to colour dummy device 80x25
[   31.920845] nouveau 0000:01:00.0: NVIDIA G98 (298780a2)
[   31.948869] nouveau 0000:01:00.0: bios: version 62.98.4e.00.41
[   31.971054] nouveau 0000:01:00.0: bios: M0203T not found
[   31.971057] nouveau 0000:01:00.0: bios: M0203E not matched!
[   31.971060] nouveau 0000:01:00.0: fb: 512 MiB DDR2
[   32.055213] [TTM] Zone  kernel: Available graphics memory: 2003032 kiB
[   32.055215] [TTM] Initializing pool allocator
[   32.055222] [TTM] Initializing DMA pool allocator
[   32.055249] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB
[   32.055251] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[   32.055256] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[   32.055258] nouveau 0000:01:00.0: DRM: DCB version 4.0
[   32.055261] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000323 00010034
[   32.055264] nouveau 0000:01:00.0: DRM: DCB outp 01: 02014300 00000028
[   32.055267] nouveau 0000:01:00.0: DRM: DCB outp 02: 02021332 00020010
[   32.055269] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000340
[   32.055271] nouveau 0000:01:00.0: DRM: DCB conn 01: 00001061
[   32.055273] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000147
[   32.055275] nouveau 0000:01:00.0: DRM: DCB conn 03: 00002131
[   32.055277] nouveau 0000:01:00.0: DRM: DCB conn 04: 00000400
[   32.055279] nouveau 0000:01:00.0: DRM: DCB conn 05: 00000210
[   32.055281] nouveau 0000:01:00.0: DRM: DCB conn 06: 00000211
[   32.055283] nouveau 0000:01:00.0: DRM: DCB conn 07: 00000213
[   32.058483] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   32.058486] [drm] Driver supports precise vblank timestamp query.
[   32.061590] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[   32.106075] nouveau 0000:01:00.0: DRM: allocated 1366x768 fb: 0x70000, bo 00000000e010a2b3
[   32.106331] fbcon: nouveaufb (fb0) is primary device
[   32.107333] Console: switching to colour frame buffer device 170x48
[   32.107378] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[   32.120093] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[   32.496790] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD75B2X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   32.496794] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   32.496797] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   32.496799] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   32.496801] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   32.496803] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0xc
[   32.496805] snd_hda_codec_idt hdaudioC0D0:      Mic=0xb
[   32.535140] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   32.535228] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   40.158747] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   40.200092] r8169 0000:03:00.0 enp3s0: link down
[   40.200330] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   40.258236] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   40.278644] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   40.518933] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   41.562182] wlp2s0: authenticate with a4:3e:51:04:f3:63
[   41.575852] wlp2s0: send auth to a4:3e:51:04:f3:63 (try 1/3)
[   41.578114] wlp2s0: authenticated
[   41.584085] wlp2s0: associate with a4:3e:51:04:f3:63 (try 1/3)
[   41.589887] wlp2s0: RX AssocResp from a4:3e:51:04:f3:63 (capab=0x431 status=0 aid=5)
[   41.590042] wlp2s0: associated
[   41.590147] ath: EEPROM regdomain: 0x80fa
[   41.590148] ath: EEPROM indicates we should expect a country code
[   41.590149] ath: doing EEPROM country->regdmn map search
[   41.590150] ath: country maps to regdmn code: 0x37
[   41.590151] ath: Country alpha2 being used: FR
[   41.590152] ath: Regpair used: 0x37
[   41.590153] ath: regdomain 0x80fa dynamically updated by country element
[   41.686766] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   54.057749] rfkill: input handler disabled
[  159.576555] nouveau 0000:01:00.0: fb: trapped read at 0100922034 on channel -1 [1fed0000 unknown] engine 06 [BAR] client 08 [PFIFO_READ] subclient 01 [IN] reason 00000002 [PAGE_NOT_PRESENT]
[  216.583726] perf: interrupt took too long (2517 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
[  275.418392] systemd: 24 output lines suppressed due to ratelimiting
[  275.430023] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[  275.448259] systemd[1]: Detected architecture x86-64.
[  276.182426] systemd[1]: Stopping Journal Service...
[  276.182773] systemd-journald[241]: Received SIGTERM from PID 1 (systemd).
[  276.633099] systemd[1]: Stopped Journal Service.
[  276.635992] systemd[1]: Starting Journal Service...
[  276.747478] systemd[1]: Started Journal Service.
[  295.859571] perf: interrupt took too long (3154 > 3146), lowering kernel.perf_event_max_sample_rate to 63250
[  322.158801] kauditd_printk_skb: 32 callbacks suppressed
[  322.158803] audit: type=1400 audit(1561632031.537:44): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=5337 comm="apparmor_parser"
[  322.172707] audit: type=1400 audit(1561632031.553:45): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=5337 comm="apparmor_parser"
[  328.750575] audit: type=1400 audit(1561632038.129:46): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.chromium" pid=5449 comm="apparmor_parser"
[  328.782295] audit: type=1400 audit(1561632038.161:47): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.chromium.chromium" pid=5452 comm="apparmor_parser"
[  328.783763] audit: type=1400 audit(1561632038.161:48): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.chromium.chromedriver" pid=5451 comm="apparmor_parser"
[  331.663560] audit: type=1400 audit(1561632041.042:49): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-characters" pid=5459 comm="apparmor_parser"
[  331.696422] audit: type=1400 audit(1561632041.078:50): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=5461 comm="apparmor_parser"
[  332.241751] audit: type=1400 audit(1561632041.622:51): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/7169/usr/lib/snapd/snap-confine" pid=5468 comm="apparmor_parser"
[  332.241758] audit: type=1400 audit(1561632041.622:52): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/7169/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=5468 comm="apparmor_parser"
[  332.248810] audit: type=1400 audit(1561632041.630:53): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=5470 comm="apparmor_parser"
[  332.250642] audit: type=1400 audit(1561632041.630:54): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=5471 comm="apparmor_parser"
[  335.275640] audit: type=1400 audit(1561632044.654:55): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gimp" pid=5478 comm="apparmor_parser"
[  335.310370] audit: type=1400 audit(1561632044.690:56): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.gimp.gimp" pid=5481 comm="apparmor_parser"
[  338.253393] audit: type=1400 audit(1561632047.634:57): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=5488 comm="apparmor_parser"
[  338.285205] audit: type=1400 audit(1561632047.666:58): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=5490 comm="apparmor_parser"
[  340.883082] audit: type=1400 audit(1561632050.262:59): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-logs" pid=5497 comm="apparmor_parser"
[  340.914399] audit: type=1400 audit(1561632050.294:60): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=5500 comm="apparmor_parser"
[  343.683705] audit: type=1400 audit(1561632053.062:61): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=5507 comm="apparmor_parser"
[  343.716082] audit: type=1400 audit(1561632053.094:62): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=5509 comm="apparmor_parser"
[  421.213357] perf: interrupt took too long (3953 > 3942), lowering kernel.perf_event_max_sample_rate to 50500
[  591.738227] audit: type=1400 audit(1561632301.118:63): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=11648 comm="apparmor_parser"
[  594.562192] audit: type=1400 audit(1561632303.942:64): apparmor="DENIED" operation="open" profile="system_tor" name="/etc/ssl/openssl.cnf" pid=11752 comm="tor" requested_mask="r" denied_mask="r" fsuid=123 ouid=0
[  951.864985] perf: interrupt took too long (4951 > 4941), lowering kernel.perf_event_max_sample_rate to 40250
[ 1734.395440] audit: type=1400 audit(1561633443.775:65): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/ro/.cache/mesa_shader_cache/index" pid=13452 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
[ 1734.448677] nouveau 0000:01:00.0: fb: trapped read at 0100922000 on channel -1 [1fed0000 unknown] engine 06 [BAR] client 08 [PFIFO_READ] subclient 01 [IN] reason 00000002 [PAGE_NOT_PRESENT]
[ 1743.133201] audit: type=1400 audit(1561633452.515:66): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/ro/.thunderbird/profiles.ini" pid=13451 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 1743.163947] audit: type=1400 audit(1561633452.543:67): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/ro/.thunderbird/yhgwuyb7.default/secmod.db" pid=13451 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 1743.198786] audit: type=1400 audit(1561633452.579:68): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/ro/.thunderbird/yhgwuyb7.default/cert8.db" pid=13451 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[ 1743.199597] audit: type=1400 audit(1561633452.579:69): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/ro/.thunderbird/yhgwuyb7.default/key3.db" pid=13451 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[ 1789.306922] wlp2s0: deauthenticating from a4:3e:51:04:f3:63 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1794.093693] PM: suspend entry (deep)
[ 1794.093697] PM: Syncing filesystems ... done.
[ 1794.787625] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 1794.790011] OOM killer disabled.
[ 1794.790012] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1794.791619] Suspending console(s) (use no_console_suspend to debug)
[ 1794.809007] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1794.964144] sd 0:0:0:0: [sda] Stopping disk
[ 1800.009871] ACPI: EC: interrupt blocked
[ 1800.028359] ACPI: Preparing to enter system sleep state S3
[ 1800.050127] ACPI: EC: event blocked
[ 1800.050129] ACPI: EC: EC stopped
[ 1800.050130] PM: Saving platform NVS memory
[ 1800.050467] Disabling non-boot CPUs ...
[ 1800.064455] IRQ 28: no longer affine to CPU1
[ 1800.065466] smpboot: CPU 1 is now offline
[ 1800.065698] ACPI: Low-level resume complete
[ 1800.065698] ACPI: EC: EC started
[ 1800.065698] PM: Restoring platform NVS memory
[ 1800.072301] Enabling non-boot CPUs ...
[ 1800.072362] x86: Booting SMP configuration:
[ 1800.072363] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 1801.120913]  cache: parent cpu1 should not be sleeping
[ 1801.208057] CPU1 is up
[ 1801.209918] ACPI: Waking up from system sleep state S3
[ 1801.237897] ACPI: EC: interrupt unblocked
[ 1801.257374] usb usb7: root hub lost power or was reset
[ 1801.257411] usb usb8: root hub lost power or was reset
[ 1801.257708] usb usb6: root hub lost power or was reset
[ 1801.258918] ath: phy0: ASPM enabled: 0x43
[ 1801.259858] sd 0:0:0:0: [sda] Starting disk
[ 1801.260315] usb usb3: root hub lost power or was reset
[ 1801.260472] usb usb4: root hub lost power or was reset
[ 1801.261629] usb usb5: root hub lost power or was reset
[ 1801.261886] ACPI: EC: event unblocked
[ 1801.312563] r8169 0000:03:00.0 enp3s0: link down
[ 1801.524036] usb 2-4: reset high-speed USB device number 3 using ehci-pci
[ 1801.594205] ata5: SATA link down (SStatus 0 SControl 300)
[ 1801.594253] ata6: SATA link down (SStatus 0 SControl 300)
[ 1801.604041] usb 5-1: reset full-speed USB device number 2 using uhci_hcd
[ 1801.756065] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1801.761844] ata2.00: configured for UDMA/100
[ 1801.884277] OOM killer enabled.
[ 1801.884279] Restarting tasks ... done.
[ 1801.986317] video LNXVIDEO:01: Restoring backlight state
[ 1801.987742] PM: suspend exit
[ 1803.504179] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1803.510523] ata1.00: configured for UDMA/100
[ 1803.713719] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 1803.752057] r8169 0000:03:00.0 enp3s0: link down
[ 1803.752147] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 1803.754726] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1803.788067] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1803.848099] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1805.004898] wlp2s0: authenticate with a4:3e:51:04:f3:63
[ 1805.019007] wlp2s0: send auth to a4:3e:51:04:f3:63 (try 1/3)
[ 1805.021337] wlp2s0: authenticated
[ 1805.028036] wlp2s0: associate with a4:3e:51:04:f3:63 (try 1/3)
[ 1805.033680] wlp2s0: RX AssocResp from a4:3e:51:04:f3:63 (capab=0x431 status=0 aid=5)
[ 1805.033845] wlp2s0: associated
[ 1805.033976] ath: EEPROM regdomain: 0x80fa
[ 1805.033977] ath: EEPROM indicates we should expect a country code
[ 1805.033978] ath: doing EEPROM country->regdmn map search
[ 1805.033979] ath: country maps to regdmn code: 0x37
[ 1805.033980] ath: Country alpha2 being used: FR
[ 1805.033981] ath: Regpair used: 0x37
[ 1805.033982] ath: regdomain 0x80fa dynamically updated by country element
[ 1805.048072] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 3788.865210] Bluetooth: Core ver 2.22
[ 3788.865253] NET: Registered protocol family 31
[ 3788.865255] Bluetooth: HCI device and connection manager initialized
[ 3788.865262] Bluetooth: HCI socket layer initialized
[ 3788.865266] Bluetooth: L2CAP socket layer initialized
[ 3788.865276] Bluetooth: SCO socket layer initialized
[ 3788.897120] usbcore: registered new interface driver ath3k
[ 4231.142657] wlp2s0: deauthenticating from a4:3e:51:04:f3:63 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4234.243503] PM: Image not found (code -22)
[ 4234.494279] PM: hibernation entry
[ 4234.495075] PM: Syncing filesystems ... 
[ 4235.072617] PM: done.
[ 4235.072620] Freezing user space processes ... (elapsed 0.031 seconds) done.
[ 4235.104300] OOM killer disabled.
[ 4235.104416] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 4235.104418] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[ 4235.104423] PM: Marking nosave pages: [mem 0xbde61000-0xbdebefff]
[ 4235.104427] PM: Marking nosave pages: [mem 0xbdf82000-0xbdfbefff]
[ 4235.104430] PM: Marking nosave pages: [mem 0xbdfe2000-0xbdff6fff]
[ 4235.104432] PM: Marking nosave pages: [mem 0xbe000000-0xffffffff]
[ 4235.105537] PM: Basic memory bitmaps created
[ 4235.105538] PM: Preallocating image memory... done (allocated 401721 pages)
[ 4239.395589] PM: Allocated 1606884 kbytes in 4.29 seconds (374.56 MB/s)
[ 4239.395591] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4239.397616] Suspending console(s) (use no_console_suspend to debug)
[ 4243.236336] ACPI: EC: interrupt blocked
[ 4243.236859] Disabling non-boot CPUs ...
[ 4243.252388] IRQ 28: no longer affine to CPU1
[ 4243.253395] smpboot: CPU 1 is now offline
[ 4243.253947] PM: Creating hibernation image:
[ 4243.256356] PM: Need to copy 439141 pages
[ 4243.256356] PM: Normal pages needed: 439141 + 1024, available pages: 600878
[ 4243.256356] PM: Hibernation image created (439141 pages copied)
[ 4243.256356] Enabling non-boot CPUs ...
[ 4243.256356] x86: Booting SMP configuration:
[ 4243.256356] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4243.256362]  cache: parent cpu1 should not be sleeping
[ 4243.256362] CPU1 is up
[ 4243.256362] ACPI: EC: interrupt unblocked
[ 4243.258827] ath: phy0: ASPM enabled: 0x43
[ 4243.262871] ACPI: button: The lid device is not compliant to SW_LID.
[ 4243.310939] r8169 0000:03:00.0 enp3s0: link down
[ 4243.614746] ata5: SATA link down (SStatus 0 SControl 300)
[ 4243.614769] ata6: SATA link down (SStatus 0 SControl 300)
[ 4243.776030] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4243.780051] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4243.783425] ata1.00: configured for UDMA/100
[ 4243.783592] ata2.00: configured for UDMA/100
[ 4243.793972] PM: Using 1 thread(s) for compression
[ 4243.793974] PM: Compressing and saving image data (439999 pages)...
[ 4243.793987] PM: Image saving progress:   0%
[ 4244.318779] PM: Image saving progress:  10%
[ 4244.927499] PM: Image saving progress:  20%
[ 4245.397327] PM: Image saving progress:  30%
[ 4245.981205] PM: Image saving progress:  40%
[ 4246.465565] PM: Image saving progress:  50%
[ 4246.990539] PM: Image saving progress:  60%
[ 4247.676166] PM: Image saving progress:  70%
[ 4248.108019] PM: Image saving progress:  80%
[ 4248.602547] PM: Image saving progress:  90%
[ 4249.107571] PM: Image saving progress: 100%
[ 4250.064196] PM: Image saving done
[ 4250.064200] PM: Wrote 1759996 kbytes in 6.27 seconds (280.70 MB/s)
[ 4250.064606] PM: S|
[ 4250.168854] Suspending console(s) (use no_console_suspend to debug)
[ 4250.184585] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 4250.229040] sd 0:0:0:0: [sda] Stopping disk
[ 4253.669634] ACPI: EC: interrupt blocked
[ 4253.688271] ACPI: Preparing to enter system sleep state S3
[ 4253.707752] ACPI: EC: event blocked
[ 4253.707753] ACPI: EC: EC stopped
[ 4253.707754] PM: Saving platform NVS memory
[ 4253.708088] Disabling non-boot CPUs ...
[ 4253.725372] smpboot: CPU 1 is now offline
[ 4253.725419] ACPI: Low-level resume complete
[ 4253.725419] ACPI: EC: EC started
[ 4253.725419] PM: Restoring platform NVS memory
[ 4253.731878] Enabling non-boot CPUs ...
[ 4253.731941] x86: Booting SMP configuration:
[ 4253.731942] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4254.270554]  cache: parent cpu1 should not be sleeping
[ 4254.360052] CPU1 is up
[ 4254.361915] ACPI: Waking up from system sleep state S3
[ 4254.398597] ACPI: EC: interrupt unblocked
[ 4254.421383] usb usb4: root hub lost power or was reset
[ 4254.421804] usb usb6: root hub lost power or was reset
[ 4254.421836] usb usb7: root hub lost power or was reset
[ 4254.421849] usb usb8: root hub lost power or was reset
[ 4254.422981] ath: phy0: ASPM enabled: 0x43
[ 4254.424722] usb usb5: root hub lost power or was reset
[ 4254.424867] usb usb3: root hub lost power or was reset
[ 4254.426462] ACPI: EC: event unblocked
[ 4254.434263] sd 0:0:0:0: [sda] Starting disk
[ 4254.475204] r8169 0000:03:00.0 enp3s0: link down
[ 4254.704041] usb 2-4: reset high-speed USB device number 3 using ehci-pci
[ 4254.780055] usb 5-1: reset full-speed USB device number 2 using uhci_hcd
[ 4254.782691] ata6: SATA link down (SStatus 0 SControl 300)
[ 4254.782733] ata5: SATA link down (SStatus 0 SControl 300)
[ 4254.944046] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4254.949268] ata2.00: configured for UDMA/100
[ 4257.080077] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4257.086740] ata1.00: configured for UDMA/100
[ 4257.125969] PM: Basic memory bitmaps freed
[ 4257.125975] OOM killer enabled.
[ 4257.125976] Restarting tasks ... done.
[ 4257.212901] video LNXVIDEO:01: Restoring backlight state
[ 4257.214106] PM: hibernation exit
[ 4293.474218] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 4293.520070] r8169 0000:03:00.0 enp3s0: link down
[ 4293.520212] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 4295.737456] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 4295.756639] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 4302.109551] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 4303.498302] wlp2s0: authenticate with a4:3e:51:04:f3:63
[ 4303.511976] wlp2s0: send auth to a4:3e:51:04:f3:63 (try 1/3)
[ 4303.514251] wlp2s0: authenticated
[ 4303.516093] wlp2s0: associate with a4:3e:51:04:f3:63 (try 1/3)
[ 4303.520632] wlp2s0: RX AssocResp from a4:3e:51:04:f3:63 (capab=0x431 status=0 aid=3)
[ 4303.520799] wlp2s0: associated
[ 4303.520926] ath: EEPROM regdomain: 0x80fa
[ 4303.520928] ath: EEPROM indicates we should expect a country code
[ 4303.520929] ath: doing EEPROM country->regdmn map search
[ 4303.520930] ath: country maps to regdmn code: 0x37
[ 4303.520931] ath: Country alpha2 being used: FR
[ 4303.520932] ath: Regpair used: 0x37
[ 4303.520933] ath: regdomain 0x80fa dynamically updated by country element
[ 4303.533262] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
ro@root:~$

Nuliel · Le 27/06/2019, à 13:22

Tu peux essayer

sudo modprobe -r ath9k && sudo modprobe ath3k

et tester wifi + bluetooth

Djioliat · Le 27/06/2019, à 13:26

ro@root:~$ sudo modprobe -r ath9k && sudo modprobe ath3k
[sudo] Mot de passe de ro : 
ro@root:~$

Ha le wiffi est partie

Nuliel · Le 27/06/2019, à 13:26

Et le bluetooth?

Djioliat · Le 27/06/2019, à 13:28

Naziel a écrit :

Et le bluetooth?

Non plus

xubu1957 · Le 27/06/2019, à 13:29

@Naziel

Je trouve :

> [ubuntu] Atheros AR3011 bluetooth doesn't work on Ubuntu 18.04

Nuliel · Le 27/06/2019, à 13:30

Ah, bon machine arrière et on teste un truc en même temps

sudo modprobe -r ath3k && sudo modprobe ath9k btcoex_enable=1 nohwcrypt=1

Djioliat · Le 27/06/2019, à 13:31

ro@root:~$ sudo modprobe -r ath3k && sudo modprobe ath9k btcoex_enable=1 nohwcrypt=1
ro@root:~$

Le wiffi est reparti

Dernière modification par Djioliat (Le 27/06/2019, à 13:32)

Nuliel · Le 27/06/2019, à 13:32

Et le bluetooth?

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 27/06/2019, à 12:17

Plus de bluetooth

#2 Le 27/06/2019, à 12:20

Re : Plus de bluetooth

#3 Le 27/06/2019, à 12:21

Re : Plus de bluetooth

#4 Le 27/06/2019, à 12:24

Re : Plus de bluetooth

#5 Le 27/06/2019, à 12:27

Re : Plus de bluetooth

#6 Le 27/06/2019, à 12:31

Re : Plus de bluetooth

#7 Le 27/06/2019, à 12:38

Re : Plus de bluetooth

#8 Le 27/06/2019, à 12:40

Re : Plus de bluetooth

#9 Le 27/06/2019, à 12:44

Re : Plus de bluetooth

#10 Le 27/06/2019, à 12:45

Re : Plus de bluetooth

#11 Le 27/06/2019, à 12:58

Re : Plus de bluetooth

#12 Le 27/06/2019, à 13:00

Re : Plus de bluetooth

#13 Le 27/06/2019, à 13:03

Re : Plus de bluetooth

#14 Le 27/06/2019, à 13:05

Re : Plus de bluetooth

#15 Le 27/06/2019, à 13:05

Re : Plus de bluetooth

#16 Le 27/06/2019, à 13:14

Re : Plus de bluetooth

#17 Le 27/06/2019, à 13:15

Re : Plus de bluetooth

#18 Le 27/06/2019, à 13:22

Re : Plus de bluetooth

#19 Le 27/06/2019, à 13:26

Re : Plus de bluetooth

#20 Le 27/06/2019, à 13:26

Re : Plus de bluetooth

#21 Le 27/06/2019, à 13:28

Re : Plus de bluetooth

#22 Le 27/06/2019, à 13:29

Re : Plus de bluetooth

#23 Le 27/06/2019, à 13:30

Re : Plus de bluetooth

#24 Le 27/06/2019, à 13:31

Re : Plus de bluetooth

#25 Le 27/06/2019, à 13:32

Re : Plus de bluetooth

Pied de page des forums