Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 30/12/2019, à 11:21

magaliFP

Problème sur Thomson neo 14. Touchpad ne fonctionne pas

Bonjour,
J'ai acheté un ordinateur portable Thomsom Neo14A-4SL64
Mémoiure : 3,7 Gio
Processeur Intel Arom X5-E8000 CPU @ 1.04 GHzx4
Carte graphique : Intel HD Graphics 400 ( Braswell)
Gnome 3.28.2
Type de système d'exploitation 64 bits
Disque 60,6Go

J'ai installé la version 18.04.3 LTS
J'ai un  problème avec le Touchpad, il ne fonctionne pas. Pour l'instant j'utilise une souris filaire usb.
Merci pour votre aide

Dernière modification par magaliFP (Le 30/12/2019, à 11:33)

Hors ligne

#2 Le 30/12/2019, à 11:26

xubu1957

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

Bonjour,

Donne :

xinput list "$(egrep -i 'synap|alps|etps' /proc/bus/input/devices |cut -d'"' -f2)"

> doc.ubuntu-fr.org/touchpad#connaitre_son_pave_tactile

Tu devrais causer du Touchpad dans le titre de ta discussion, pour attirer des aidants spécialistes. tongue


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#3 Le 30/12/2019, à 11:35

magaliFP

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

 famille@famille:~$ xinput list "$(egrep -i 'synap|alps|etps' /proc/bus/input/devices |cut -d'"' -f2)"
unable to find device 
famille@famille:~$ 
 famille@famille:~$ xinput list
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ USB OPTICAL MOUSE                       	id=11	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Video Bus                               	id=7	[slave  keyboard (3)]
    ↳ Power Button                            	id=8	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=9	[slave  keyboard (3)]
    ↳ USB 2.0 Camera: USB Camera              	id=10	[slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard            	id=12	[slave  keyboard (3)]
famille@famille:~$ 

Dernière modification par magaliFP (Le 30/12/2019, à 11:46)

Hors ligne

#4 Le 30/12/2019, à 12:01

xubu1957

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

Tu as regardé dans le BIOS ?

Le 26/11/2017, Naziel a écrit :

Bonjour,

Dans la doc, https://doc.ubuntu-fr.org/liste_portabl … #aspire_ex il y a ce modèle Aspire ES1-521-64BK avec le commentaire: "Réglage du touchpad : Accéder au BIOS. Aller dans l'onglet Main puis dans Touchpad. Par défaut Touchpad est configuré en Advanced, le remplacer par Basic. Sauvegarder la configuration et redémarrer l'ordinateur. ". Je te laisse essayer

_ _ _

Le touchpad doit être quelque part dans le gestionnaire de périphériques.
Il est normalement associé à la souris (Souris et autres périphériques de pointage).

> commentcamarche.net/forum/affich-35354139-le-touchpad-de-thomson-ne-fonctionne-plus

Tu as regardé dans les Paramètres Souris et pavé tactile ?

Dernière modification par xubu1957 (Le 30/12/2019, à 12:07)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#5 Le 30/12/2019, à 13:21

magaliFP

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

Dans le BIOS j'ai rien trouvé
J'ai fait la manip pour réactiver le pavé tactile Fn+F2 mais ça ne fonctionne pas non plus
J'ai la souris qui apparait dans les paramètres mais le touchpad ne fonctionne pas...

Dernière modification par magaliFP (Le 30/12/2019, à 13:23)

Hors ligne

#6 Le 30/12/2019, à 21:16

Nuliel

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

Hello,
Pourrais tu prendre des photos du bios afin de lister les différents paramètres qui pourraient avoir un lien avec le touchpad? Tu peux regarder le lien dans ma signature qui explique comment poster une photo sur ce forum.

Hors ligne

#7 Le 30/12/2019, à 21:41

magaliFP

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

Bonsoir,
J'ai pas trouvé grand chose
F9689115-8363-4-E6-C-AA08-A21-F85-C41937.jpg

91733-B4-E-BE16-4-E89-AE18-C233231229-CB.jpg

DE7-B1-C0-F-E665-4074-B75-C-25852354-B6-A6.jpg A4170061-5-F5-D-4671-B627-16-DF1-A6-DDE70.jpg C80-E984-C-0-A17-4-FFB-A269-6-B9678-CC85-C7.jpg E986-D9-C8-F6-A8-445-F-B6-DF-CBA464-F3-D370.jpg 8812-ABEA-2-C3-C-4-C5-C-8-E1-E-B0-C78-AE7871-F.jpg D99422-C5-2-DDE-43-F7-A899-893542845656.jpg

Hors ligne

#8 Le 30/12/2019, à 21:51

Nuliel

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

Efectivement, j'ai l'impression qu'il n'y a rien d'utile dans le bios
Pourrais tu démarrer sur ubuntu, faire

dmesg > retourdmesg.txt

et donner le contenu du fichier retourdmesg.txt afin que j'essaie de trouver des traces du touchpad.

Hors ligne

#9 Le 30/12/2019, à 21:55

magaliFP

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

J'ai tapé la commande dans le terminal et il ne s'est rien passé.
J'ai trouvé le fichier
voici son contenu

[    0.000000] microcode: microcode updated early to revision 0x411, date = 2019-04-23
[    0.000000] Linux version 5.0.0-37-generic (buildd@lcy01-amd64-023) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #40~18.04.1-Ubuntu SMP Thu Nov 14 12:06:39 UTC 2019 (Ubuntu 5.0.0-37.40~18.04.1-generic 5.0.21)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-37-generic root=UUID=20984d55-9a8c-43cb-96d4-b244d3559a2a ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000085fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000086000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000006f45ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000006f460000-0x000000006fd5ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006fd60000-0x000000007657efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007657f000-0x000000007660efff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007660f000-0x0000000076ebefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000076ebf000-0x0000000077fbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000077fbf000-0x0000000077ffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000077fff000-0x0000000077ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  ACPI 2.0=0x77ffe014  SMBIOS=0x7664f000  ESRT=0x76652618 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: THOMSON NEO14A-4SL64/N/A, BIOS E117CTHOMSONM6.C004 12/26/2018
[    0.000000] tsc: Detected 1040.000 MHz processor
[    0.000307] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000313] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000341] last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000352] MTRR default type: uncachable
[    0.000356] MTRR fixed ranges enabled:
[    0.000360]   00000-9FFFF write-back
[    0.000365]   A0000-FFFFF write-protect
[    0.000368] MTRR variable ranges enabled:
[    0.000373]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000378]   1 base 000000000 mask F80000000 write-back
[    0.000382]   2 base 07C000000 mask FFC000000 uncachable
[    0.000386]   3 base 07BC00000 mask FFFC00000 uncachable
[    0.000391]   4 base 100000000 mask F80000000 write-back
[    0.000394]   5 disabled
[    0.000396]   6 disabled
[    0.000398]   7 disabled
[    0.000700] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000858] last_pfn = 0x78000 max_arch_pfn = 0x400000000
[    0.021517] esrt: Reserving ESRT space from 0x0000000076652618 to 0x0000000076652650.
[    0.021548] check: Scanning 1 areas for low memory corruption
[    0.021568] BRK [0x167001000, 0x167001fff] PGTABLE
[    0.021575] BRK [0x167002000, 0x167002fff] PGTABLE
[    0.021581] BRK [0x167003000, 0x167003fff] PGTABLE
[    0.021707] BRK [0x167004000, 0x167004fff] PGTABLE
[    0.021718] BRK [0x167005000, 0x167005fff] PGTABLE
[    0.021956] BRK [0x167006000, 0x167006fff] PGTABLE
[    0.022037] BRK [0x167007000, 0x167007fff] PGTABLE
[    0.022284] BRK [0x167008000, 0x167008fff] PGTABLE
[    0.022378] BRK [0x167009000, 0x167009fff] PGTABLE
[    0.022501] BRK [0x16700a000, 0x16700afff] PGTABLE
[    0.022554] BRK [0x16700b000, 0x16700bfff] PGTABLE
[    0.022715] RAMDISK: [mem 0x3320f000-0x358fefff]
[    0.022743] ACPI: Early table checksum verification disabled
[    0.022754] ACPI: RSDP 0x0000000077FFE014 000024 (v02 INSYDE)
[    0.022768] ACPI: XSDT 0x0000000077FFE120 0000AC (v01 INSYDE INSYDE   00000003      01000013)
[    0.022786] ACPI: FACP 0x0000000077FF9000 00010C (v05 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.022805] ACPI: DSDT 0x0000000077FE7000 00BB50 (v02 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.022817] ACPI: FACS 0x0000000077FAB000 000040
[    0.022828] ACPI: UEFI 0x0000000077FFD000 000236 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.022841] ACPI: TCPA 0x0000000077FFC000 000032 (v02 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.022854] ACPI: MSDM 0x0000000077FFB000 000055 (v03 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.022866] ACPI: UEFI 0x0000000077FFA000 000042 (v01 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.022879] ACPI: APIC 0x0000000077FF8000 000084 (v03 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.022890] ACPI: MCFG 0x0000000077FF7000 00003C (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.022902] ACPI: SLIC 0x0000000077FF6000 000176 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.022913] ACPI: SSDT 0x0000000077FF5000 0005CC (v01 INSYDE CpuDptf  00000003 ACPI 00040000)
[    0.022926] ACPI: SSDT 0x0000000077FF3000 0019CE (v01 INSYDE DptfTab  00000003 ACPI 00040000)
[    0.022937] ACPI: SSDT 0x0000000077FE6000 000763 (v01 INSYDE CpuPm    00003000 ACPI 00040000)
[    0.022949] ACPI: SSDT 0x0000000077FE5000 000290 (v01 INSYDE Cpu0Tst  00003000 ACPI 00040000)
[    0.022960] ACPI: SSDT 0x0000000077FE4000 00017A (v01 INSYDE ApTst    00003000 ACPI 00040000)
[    0.022973] ACPI: SSDT 0x0000000077FE3000 000451 (v01 INSYDE Tpm2Tabl 00001000 ACPI 00040000)
[    0.022985] ACPI: TPM2 0x0000000077FE2000 000034 (v03 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.022998] ACPI: FPDT 0x0000000077FE1000 000044 (v01 INSYDE INSYDE   00000002 ACPI 00040000)
[    0.023011] ACPI: BGRT 0x0000000077FE0000 000038 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.023043] ACPI: Local APIC address 0xfee00000
[    0.023435] No NUMA configuration found
[    0.023439] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[    0.023474] NODE_DATA(0) allocated [mem 0x17ffd5000-0x17fffffff]
[    0.024728] Zone ranges:
[    0.024731]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.024736]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.024741]   Normal   [mem 0x0000000100000000-0x000000017fffffff]
[    0.024745]   Device   empty
[    0.024748] Movable zone start for each node
[    0.024762] Early memory node ranges
[    0.024766]   node   0: [mem 0x0000000000001000-0x000000000006efff]
[    0.024769]   node   0: [mem 0x0000000000070000-0x0000000000085fff]
[    0.024772]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.024775]   node   0: [mem 0x0000000020200000-0x000000006f45ffff]
[    0.024778]   node   0: [mem 0x000000006fd60000-0x000000007657efff]
[    0.024780]   node   0: [mem 0x0000000077fff000-0x0000000077ffffff]
[    0.024783]   node   0: [mem 0x0000000100000000-0x000000017fffffff]
[    0.025612] Zeroed struct page in unavailable ranges: 9724 pages
[    0.025619] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[    0.025625] On node 0 totalpages: 1006084
[    0.025629]   DMA zone: 64 pages used for memmap
[    0.025632]   DMA zone: 22 pages reserved
[    0.025635]   DMA zone: 3972 pages, LIFO batch:0
[    0.026126]   DMA32 zone: 7466 pages used for memmap
[    0.026130]   DMA32 zone: 477824 pages, LIFO batch:63
[    0.094520]   Normal zone: 8192 pages used for memmap
[    0.094525]   Normal zone: 524288 pages, LIFO batch:63
[    0.156049] Reserving Intel graphics memory at [mem 0x7c800000-0x7e7fffff]
[    0.156153] ACPI: PM-Timer IO Port: 0x408
[    0.156161] ACPI: Local APIC address 0xfee00000
[    0.156185] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.156189] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.156192] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.156195] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.156223] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[    0.156230] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.156236] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.156241] ACPI: IRQ0 used by override.
[    0.156247] ACPI: IRQ9 used by override.
[    0.156255] Using ACPI (MADT) for SMP configuration information
[    0.156285] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.156366] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.156373] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[    0.156379] PM: Registered nosave memory: [mem 0x00086000-0x0009ffff]
[    0.156382] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.156389] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.156395] PM: Registered nosave memory: [mem 0x6f460000-0x6fd5ffff]
[    0.156402] PM: Registered nosave memory: [mem 0x7657f000-0x7660efff]
[    0.156405] PM: Registered nosave memory: [mem 0x7660f000-0x76ebefff]
[    0.156407] PM: Registered nosave memory: [mem 0x76ebf000-0x77fbefff]
[    0.156410] PM: Registered nosave memory: [mem 0x77fbf000-0x77ffefff]
[    0.156417] PM: Registered nosave memory: [mem 0x78000000-0x7c7fffff]
[    0.156419] PM: Registered nosave memory: [mem 0x7c800000-0x7e7fffff]
[    0.156422] PM: Registered nosave memory: [mem 0x7e800000-0xe00f7fff]
[    0.156425] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.156427] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[    0.156430] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.156433] PM: Registered nosave memory: [mem 0xfed02000-0xffbfffff]
[    0.156435] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.156442] [mem 0x7e800000-0xe00f7fff] available for PCI devices
[    0.156446] Booting paravirtualized kernel on bare hardware
[    0.156457] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.156489] random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0
[    0.156517] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.157523] percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u524288
[    0.157556] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.157559] pcpu-alloc: [0] 0 1 2 3 
[    0.157672] Built 1 zonelists, mobility grouping on.  Total pages: 990340
[    0.157676] Policy zone: Normal
[    0.157682] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-37-generic root=UUID=20984d55-9a8c-43cb-96d4-b244d3559a2a ro quiet splash vt.handoff=1
[    0.181231] Calgary: detecting Calgary via BIOS EBDA area
[    0.181237] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.221620] Memory: 3759708K/4024336K available (14339K kernel code, 2336K rwdata, 4416K rodata, 2588K init, 5192K bss, 264628K reserved, 0K cma-reserved)
[    0.222271] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.222293] Kernel/User page tables isolation: enabled
[    0.222349] ftrace: allocating 41688 entries in 163 pages
[    0.281948] rcu: Hierarchical RCU implementation.
[    0.281954] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.281957] 	Tasks RCU enabled.
[    0.281961] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.281963] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.296774] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.297280] vt handoff: transparent VT on vt#1
[    0.297302] Console: colour dummy device 80x25
[    0.297313] printk: console [tty0] enabled
[    0.297381] ACPI: Core revision 20181213
[    0.297905] APIC: Switch to symmetric I/O mode setup
[    0.299830] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xefdb19fa24, max_idle_ns: 440795212083 ns
[    0.299868] Calibrating delay loop (skipped), value calculated using timer frequency.. 2080.00 BogoMIPS (lpj=4160000)
[    0.299878] pid_max: default: 32768 minimum: 301
[    0.303838] LSM: Security Framework initializing
[    0.303838] Yama: becoming mindful.
[    0.303838] AppArmor: AppArmor initialized
[    0.303838] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.303838] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.303838] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.303838] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.303838] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.303838] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.303838] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.303838] process: using mwait in idle threads
[    0.303838] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.303838] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    0.303838] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.303838] Spectre V2 : Mitigation: Full generic retpoline
[    0.303838] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.303838] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.303838] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.303838] MDS: Mitigation: Clear CPU buffers
[    0.303838] Freeing SMP alternatives memory: 36K
[    0.303838] TSC deadline timer enabled
[    0.303838] smpboot: CPU0: Intel(R) Atom(TM) x5-E8000  CPU @ 1.04GHz (family: 0x6, model: 0x4c, stepping: 0x4)
[    0.303838] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.303838] ... version:                3
[    0.303838] ... bit width:              40
[    0.303838] ... generic registers:      2
[    0.303838] ... value mask:             000000ffffffffff
[    0.303838] ... max period:             0000007fffffffff
[    0.303838] ... fixed-purpose events:   3
[    0.303838] ... event mask:             0000000700000003
[    0.303838] rcu: Hierarchical SRCU implementation.
[    0.303838] random: crng done (trusting CPU's manufacturer)
[    0.303838] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.304111] smp: Bringing up secondary CPUs ...
[    0.304684] x86: Booting SMP configuration:
[    0.304689] .... node  #0, CPUs:      #1 #2 #3
[    0.312546] smp: Brought up 1 node, 4 CPUs
[    0.312546] smpboot: Max logical packages: 1
[    0.312546] smpboot: Total of 4 processors activated (8320.00 BogoMIPS)
[    0.313814] devtmpfs: initialized
[    0.313814] x86/mm: Memory block size: 128MB
[    0.317679] PM: Registering ACPI NVS region [mem 0x0006f000-0x0006ffff] (4096 bytes)
[    0.317679] PM: Registering ACPI NVS region [mem 0x76ebf000-0x77fbefff] (17825792 bytes)
[    0.317679] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.317679] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.317679] pinctrl core: initialized pinctrl subsystem
[    0.319969] RTC time: 20:33:04, date: 2019-12-30
[    0.320524] NET: Registered protocol family 16
[    0.320900] audit: initializing netlink subsys (disabled)
[    0.320935] audit: type=2000 audit(1577737984.020:1): state=initialized audit_enabled=0 res=1
[    0.320935] EISA bus registered
[    0.320935] cpuidle: using governor ladder
[    0.320935] cpuidle: using governor menu
[    0.320935] ACPI: bus type PCI registered
[    0.320935] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.320935] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.320957] PCI: not using MMCONFIG
[    0.320961] PCI: Using configuration type 1 for base access
[    0.327992] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.328229] ACPI: Added _OSI(Module Device)
[    0.328235] ACPI: Added _OSI(Processor Device)
[    0.328238] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.328241] ACPI: Added _OSI(Processor Aggregator Device)
[    0.328246] ACPI: Added _OSI(Linux-Dell-Video)
[    0.328251] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.328262] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.379984] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.392478] ACPI: Dynamic OEM Table Load:
[    0.392507] ACPI: SSDT 0xFFFF9DFDFAF2B800 00050B (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.394883] ACPI: Dynamic OEM Table Load:
[    0.394905] ACPI: SSDT 0xFFFF9DFDFAF38C00 0003A5 (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.397951] ACPI: Dynamic OEM Table Load:
[    0.397972] ACPI: SSDT 0xFFFF9DFDFAFED000 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    0.399297] ACPI: Dynamic OEM Table Load:
[    0.399316] ACPI: SSDT 0xFFFF9DFDFAF62840 00008D (v01 PmRef  ApCst    00003000 INTL 20130117)
[    0.405842] ACPI: EC: EC started
[    0.405846] ACPI: EC: interrupt blocked
[    0.624659] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.624668] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.624674] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.624677] ACPI: Interpreter enabled
[    0.624774] ACPI: (supports S0 S3 S4 S5)
[    0.624778] ACPI: Using IOAPIC for interrupt routing
[    0.624942] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.632282] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[    0.632323] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.634724] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.641908] ACPI: Power Resource [USBC] (on)
[    0.661659] ACPI: Power Resource [CLK0] (on)
[    0.663441] ACPI: Power Resource [CLK0] (on)
[    0.663643] ACPI: Power Resource [CLK1] (on)
[    0.681915] ACPI: Power Resource [ID3C] (off)
[    0.700389] ACPI: Power Resource [FN00] (off)
[    0.703275] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.703298] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.703586] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.703648] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.705693] PCI host bridge to bus 0000:00
[    0.705704] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.705711] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.705717] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.705722] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.705727] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.705732] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.705737] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.705742] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.705748] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.705770] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    0.706395] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[    0.706444] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.706469] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.706486] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x103f]
[    0.706541] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.707036] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
[    0.707083] pci 0000:00:0b.0: reg 0x10: [mem 0x91218000-0x91218fff 64bit]
[    0.707642] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    0.707693] pci 0000:00:14.0: reg 0x10: [mem 0x91200000-0x9120ffff 64bit]
[    0.707838] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.708369] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[    0.708408] pci 0000:00:1a.0: reg 0x10: [mem 0x91100000-0x911fffff]
[    0.708426] pci 0000:00:1a.0: reg 0x14: [mem 0x91000000-0x910fffff]
[    0.708562] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.709215] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[    0.709264] pci 0000:00:1b.0: reg 0x10: [mem 0x91210000-0x91213fff 64bit]
[    0.709407] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.709848] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    0.710423] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[    0.710501] pci 0000:00:1f.3: reg 0x10: [mem 0x91219000-0x9121901f]
[    0.710627] pci 0000:00:1f.3: reg 0x20: [io  0x1040-0x105f]
[    0.722355] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.722796] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.723235] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.723676] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.724125] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.724562] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.725001] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.725436] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.729459] gpio gpiochip1: (INT33FF:01): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[    0.729459] gpio gpiochip2: (INT33FF:02): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[    0.732105] gpio gpiochip3: (INT33FF:03): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[    0.734370] ACPI: EC: interrupt unblocked
[    0.734401] ACPI: EC: event unblocked
[    0.734421] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.734429] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.734766] SCSI subsystem initialized
[    0.734766] libata version 3.00 loaded.
[    0.735922] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.735922] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.735922] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.735922] vgaarb: loaded
[    0.735985] ACPI: bus type USB registered
[    0.736047] usbcore: registered new interface driver usbfs
[    0.736077] usbcore: registered new interface driver hub
[    0.736155] usbcore: registered new device driver usb
[    0.800709] pps_core: LinuxPPS API ver. 1 registered
[    0.800713] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.800725] PTP clock support registered
[    0.800803] EDAC MC: Ver: 3.0.0
[    0.800803] Registered efivars operations
[    0.800803] PCI: Using ACPI for IRQ routing
[    0.803407] PCI: pci_cache_line_size set to 64 bytes
[    0.803492] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[    0.803496] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[    0.803500] e820: reserve RAM buffer [mem 0x6f460000-0x6fffffff]
[    0.803503] e820: reserve RAM buffer [mem 0x7657f000-0x77ffffff]
[    0.803905] NetLabel: Initializing
[    0.803909] NetLabel:  domain hash size = 128
[    0.803911] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.803964] NetLabel:  unlabeled traffic allowed by default
[    0.809880] clocksource: Switched to clocksource tsc-early
[    0.863751] VFS: Disk quotas dquot_6.6.0
[    0.863808] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.864304] AppArmor: AppArmor Filesystem Enabled
[    0.864417] pnp: PnP ACPI init
[    0.865298] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.865306] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.865311] system 00:00: [io  0x0500-0x05fe] has been reserved
[    0.865335] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.865692] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.865859] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.866020] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.874528] system 00:04: [mem 0x91220000-0x91220fff] has been reserved
[    0.874536] system 00:04: [mem 0x9121e000-0x9121efff] has been reserved
[    0.874542] system 00:04: [mem 0x9121c000-0x9121cfff] has been reserved
[    0.874548] system 00:04: [mem 0x9121a000-0x9121afff] has been reserved
[    0.874567] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.875017] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.875025] system 00:05: [mem 0xfea00000-0xfeafffff] has been reserved
[    0.875030] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.875036] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.875042] system 00:05: [mem 0xfed06000-0xfed06fff] has been reserved
[    0.875047] system 00:05: [mem 0xfed08000-0xfed09fff] has been reserved
[    0.875053] system 00:05: [mem 0xfed80000-0xfedbffff] could not be reserved
[    0.875059] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.875067] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.875086] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.876273] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.877899] pnp: PnP ACPI: found 7 devices
[    0.892000] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.892027] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.892035] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.892041] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.892047] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.892052] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.892057] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.892062] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.892067] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[    0.892650] NET: Registered protocol family 2
[    0.893262] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    0.893352] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.893614] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.893905] TCP: Hash tables configured (established 32768 bind 32768)
[    0.894046] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.894133] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.894491] NET: Registered protocol family 1
[    0.894515] NET: Registered protocol family 44
[    0.894555] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.899167] PCI: CLS 64 bytes, default 64
[    0.899337] Unpacking initramfs...
[    2.697116] Freeing initrd memory: 39872K
[    2.697226] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.697234] software IO TLB: mapped [mem 0x6804e000-0x6c04e000] (64MB)
[    2.697384] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xefdb19fa24, max_idle_ns: 440795212083 ns
[    2.697469] clocksource: Switched to clocksource tsc
[    2.697817] check: Scanning for low memory corruption every 60 seconds
[    2.711408] Initialise system trusted keyrings
[    2.711448] Key type blacklist registered
[    2.711617] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    2.717976] zbud: loaded
[    2.719765] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.720743] fuse init (API version 7.28)
[    2.984429] Key type asymmetric registered
[    2.984434] Asymmetric key parser 'x509' registered
[    2.984482] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    2.984646] io scheduler mq-deadline registered
[    2.985276] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.985532] efifb: probing for efifb
[    2.985573] efifb: framebuffer at 0x80000000, using 4160k, total 4160k
[    2.985577] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    2.985579] efifb: scrolling: redraw
[    2.985584] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.985989] Console: switching to colour frame buffer device 170x48
[    2.986061] fb0: EFI VGA frame buffer device
[    2.986101] intel_idle: MWAIT substates: 0x33000020
[    2.986106] intel_idle: v0.4.1 model 0x4C
[    2.987084] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.987609] ACPI: AC Adapter [ADP1] (off-line)
[    2.987911] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    2.987936] ACPI: Lid Switch [LID0]
[    2.988070] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    2.988228] ACPI: Power Button [PWRB]
[    2.988390] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    2.988418] ACPI: Sleep Button [SLPB]
[    2.988565] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.988609] ACPI: Power Button [PWRF]
[    3.006054] thermal LNXTHERM:00: registered as thermal_zone0
[    3.006060] ACPI: Thermal Zone [TZ01] (0 C)
[    3.006796] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    3.027949] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.041686] Linux agpgart interface v0.103
[    3.051908] battery: ACPI: Battery Slot [BAT1] (battery present)
[    3.078542] loop: module loaded
[    3.079477] libphy: Fixed MDIO Bus: probed
[    3.079481] tun: Universal TUN/TAP device driver, 1.6
[    3.079642] PPP generic driver version 2.4.2
[    3.079872] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.079888] ehci-pci: EHCI PCI platform driver
[    3.079939] ehci-platform: EHCI generic platform driver
[    3.079995] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.080008] ohci-pci: OHCI PCI platform driver
[    3.080041] ohci-platform: OHCI generic platform driver
[    3.080071] uhci_hcd: USB Universal Host Controller Interface driver
[    3.080705] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.080729] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    3.081918] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081509810
[    3.081934] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    3.082592] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    3.082598] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.082605] usb usb1: Product: xHCI Host Controller
[    3.082609] usb usb1: Manufacturer: Linux 5.0.0-37-generic xhci-hcd
[    3.082613] usb usb1: SerialNumber: 0000:00:14.0
[    3.083124] hub 1-0:1.0: USB hub found
[    3.083166] hub 1-0:1.0: 7 ports detected
[    3.085625] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.085639] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    3.085654] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    3.085827] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[    3.085833] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.085837] usb usb2: Product: xHCI Host Controller
[    3.085841] usb usb2: Manufacturer: Linux 5.0.0-37-generic xhci-hcd
[    3.085845] usb usb2: SerialNumber: 0000:00:14.0
[    3.086283] hub 2-0:1.0: USB hub found
[    3.086330] hub 2-0:1.0: 6 ports detected
[    3.089042] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    3.093012] i8042: Detected active multiplexing controller, rev 1.1
[    3.094785] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.094810] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    3.094933] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    3.095033] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    3.095136] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    3.095661] mousedev: PS/2 mouse device common for all mice
[    3.096548] rtc_cmos 00:06: RTC can wake from S4
[    3.097023] rtc_cmos 00:06: registered as rtc0
[    3.097090] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram
[    3.097114] i2c /dev entries driver
[    3.097745] device-mapper: uevent: version 1.0.3
[    3.098067] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    3.098150] platform eisa.0: Probing EISA bus 0
[    3.098165] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    3.098171] platform eisa.0: Cannot allocate resource for EISA slot 1
[    3.098176] platform eisa.0: Cannot allocate resource for EISA slot 2
[    3.098180] platform eisa.0: Cannot allocate resource for EISA slot 3
[    3.098184] platform eisa.0: Cannot allocate resource for EISA slot 4
[    3.098189] platform eisa.0: Cannot allocate resource for EISA slot 5
[    3.098193] platform eisa.0: Cannot allocate resource for EISA slot 6
[    3.098197] platform eisa.0: Cannot allocate resource for EISA slot 7
[    3.098202] platform eisa.0: Cannot allocate resource for EISA slot 8
[    3.098207] platform eisa.0: EISA: Detected 0 cards
[    3.098221] intel_pstate: Intel P-state driver initializing
[    3.099424] ledtrig-cpu: registered to indicate activity on CPUs
[    3.099430] EFI Variables Facility v0.08 2004-May-17
[    3.126034] NET: Registered protocol family 10
[    3.157100] Segment Routing with IPv6
[    3.157177] NET: Registered protocol family 17
[    3.157495] Key type dns_resolver registered
[    3.158586] mce: Using 6 MCE banks
[    3.158619] RAS: Correctable Errors collector initialized.
[    3.158808] microcode: sig=0x406c4, pf=0x1, revision=0x411
[    3.159091] microcode: Microcode Update Driver: v2.2.
[    3.159114] sched_clock: Marking stable (3156443457, 2633812)->(3190437499, -31360230)
[    3.159705] registered taskstats version 1
[    3.159736] Loading compiled-in X.509 certificates
[    3.167061] Loaded X.509 cert 'Build time autogenerated kernel key: 88fcad88465f792265cf358553c118dce4c5c672'
[    3.167359] Couldn't get size: 0x800000000000000e
[    3.167366] MODSIGN: Couldn't get UEFI db list
[    3.167451] Couldn't get size: 0x800000000000000e
[    3.167456] MODSIGN: Couldn't get UEFI MokListRT
[    3.169956] zswap: loaded using pool lzo/zbud
[    3.198047] Key type big_key registered
[    3.198063] Key type trusted registered
[    3.215268] Key type encrypted registered
[    3.215286] AppArmor: AppArmor sha1 policy hashing enabled
[    3.218313] ima: Allocated hash algorithm: sha1
[    3.241773] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    3.257715] No architecture policies found
[    3.257781] evm: Initialising EVM extended attributes:
[    3.257785] evm: security.selinux
[    3.257787] evm: security.SMACK64
[    3.257789] evm: security.SMACK64EXEC
[    3.257791] evm: security.SMACK64TRANSMUTE
[    3.257793] evm: security.SMACK64MMAP
[    3.257794] evm: security.apparmor
[    3.257796] evm: security.ima
[    3.257798] evm: security.capability
[    3.257801] evm: HMAC attrs: 0x1
[    3.258948]   Magic number: 15:444:600
[    3.259345] rtc_cmos 00:06: setting system clock to 2019-12-30T20:33:07 UTC (1577737987)
[    3.269927] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    3.269930] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    3.276783] Freeing unused decrypted memory: 2040K
[    3.278256] Freeing unused kernel image memory: 2588K
[    3.284391] Write protecting the kernel read-only data: 22528k
[    3.286056] Freeing unused kernel image memory: 2016K
[    3.287273] Freeing unused kernel image memory: 1728K
[    3.317079] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.317240] x86/mm: Checking user space page tables
[    3.346267] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.346272] Run /init as init process
[    3.424001] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    3.473208] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    3.473212] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    3.623942] usb 1-1: New USB device found, idVendor=0c45, idProduct=6321, bcdDevice= 0.00
[    3.623947] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    3.623949] usb 1-1: Product: USB 2.0 Camera
[    3.623952] usb 1-1: Manufacturer: Sonix Technology Co., Ltd.
[    3.647216] sdhci: Secure Digital Host Controller Interface driver
[    3.647219] sdhci: Copyright(c) Pierre Ossman
[    3.670302] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[    3.677265] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    3.677269] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    3.678403] hidraw: raw HID events driver (C) Jiri Kosina
[    3.688107] i2c_hid i2c-SYNA3602:00: HID over i2c has not been provided an Int IRQ
[    3.688163] i2c_hid: probe of i2c-SYNA3602:00 failed with error -22
[    3.751884] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[    3.759891] mmc0: new HS200 MMC card at address 0001
[    3.816546] mmcblk0: mmc0:0001 M0S002 57.6 GiB 
[    3.817322] mmcblk0boot0: mmc0:0001 M0S002 partition 1 4.00 MiB
[    3.818139] mmcblk0boot1: mmc0:0001 M0S002 partition 2 4.00 MiB
[    3.818645] mmcblk0rpmb: mmc0:0001 M0S002 partition 3 4.00 MiB, chardev (240:0)
[    3.848527]  mmcblk0: p1 p2
[    3.881504] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    3.881508] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    3.901384] usb 1-3: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[    3.901389] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.901391] usb 1-3: Product: USB2.0-CRW
[    3.901393] usb 1-3: Manufacturer: Generic
[    3.901396] usb 1-3: SerialNumber: 20100201396000000
[    4.028167] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[    4.085946] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    4.085959] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    4.176879] usb 1-4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    4.176886] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.176891] usb 1-4: Product: USB 2.0 Hub
[    4.178825] hub 1-4:1.0: USB hub found
[    4.178883] hub 1-4:1.0: 4 ports detected
[    4.289925] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    4.289943] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    4.308165] usb 1-5: new high-speed USB device number 5 using xhci_hcd
[    4.458382] usb 1-5: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00
[    4.458389] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.458394] usb 1-5: Product: 802.11n WLAN Adapter
[    4.458398] usb 1-5: Manufacturer: Realtek
[    4.458402] usb 1-5: SerialNumber: 00e04c000001
[    4.480565] usbcore: registered new interface driver rtsx_usb
[    4.499034] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    4.499041] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    4.640280] usb 1-4.3: new low-speed USB device number 6 using xhci_hcd
[    4.701765] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    4.701772] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    4.865200] usb 1-4.3: New USB device found, idVendor=275d, idProduct=0ba6, bcdDevice= 1.00
[    4.865207] usb 1-4.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.865212] usb 1-4.3: Product: USB OPTICAL MOUSE 
[    4.886312] usbcore: registered new interface driver usbhid
[    4.886316] usbhid: USB HID core driver
[    4.893795] input: USB OPTICAL MOUSE  as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3:1.0/0003:275D:0BA6.0001/input/input12
[    4.894542] hid-generic 0003:275D:0BA6.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:14.0-4.3/input0
[    4.905285] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    4.905289] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    5.028406] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    5.454871] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.472579] systemd[1]: Detected architecture x86-64.
[    5.489576] systemd[1]: Set hostname to <famille>.
[    5.894453] systemd[1]: Created slice System Slice.
[    5.895070] systemd[1]: Listening on udev Kernel Socket.
[    5.895484] systemd[1]: Listening on Syslog Socket.
[    5.895840] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.896234] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.897113] systemd[1]: Created slice User and Session Slice.
[    5.897968] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    6.046353] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[    6.069532] lp: driver loaded but no devices found
[    6.092397] ppdev: user-space parallel port driver
[    6.183245] systemd-journald[298]: Received request to flush runtime journal from PID 1
[    6.319913] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
[    6.710568] Bluetooth: Core ver 2.22
[    6.710607] NET: Registered protocol family 31
[    6.710609] Bluetooth: HCI device and connection manager initialized
[    6.710618] Bluetooth: HCI socket layer initialized
[    6.710622] Bluetooth: L2CAP socket layer initialized
[    6.710636] Bluetooth: SCO socket layer initialized
[    6.725595] nfc: nfc_init: NFC Core ver 0.1
[    6.725636] NET: Registered protocol family 39
[    6.728844] Bluetooth: HCI UART driver ver 2.3
[    6.728848] Bluetooth: HCI UART protocol H4 registered
[    6.728850] Bluetooth: HCI UART protocol BCSP registered
[    6.728910] Bluetooth: HCI UART protocol LL registered
[    6.728912] Bluetooth: HCI UART protocol ATH3K registered
[    6.728944] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    6.729020] Bluetooth: HCI UART protocol Intel registered
[    6.729124] Bluetooth: HCI UART protocol Broadcom registered
[    6.729155] Bluetooth: HCI UART protocol QCA registered
[    6.729157] Bluetooth: HCI UART protocol AG6XX registered
[    6.729159] Bluetooth: HCI UART protocol Marvell registered
[    6.802114] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[    6.860087] proc_thermal 0000:00:0b.0: Creating sysfs group for PROC_THERMAL_PCI
[    6.991356] usbcore: registered new interface driver btusb
[    6.991549] media: Linux media interface: v0.10
[    7.012931] Bluetooth: hci0: RTL: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723

[    7.013598] Bluetooth: hci0: RTL: rom_version status=0 version=1

[    7.013607] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723b_fw.bin

[    7.022970] videodev: Linux video capture interface: v2.00
[    7.044839] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    7.078951] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    7.081304] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:6321)
[    7.089240] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723b_config.bin

[    7.089319] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[    7.089346] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496

[    7.107242] VFIO - User Level meta-driver version: 0.3
[    7.119815] uvcvideo 1-1:1.0: Entity type for entity Extension 4 was not initialized!
[    7.119820] uvcvideo 1-1:1.0: Entity type for entity Processing 3 was not initialized!
[    7.119823] uvcvideo 1-1:1.0: Entity type for entity Camera 1 was not initialized!
[    7.120025] input: USB 2.0 Camera: USB Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input14
[    7.120197] usbcore: registered new interface driver uvcvideo
[    7.120199] USB Video Class driver (1.1.1)
[    7.133065] cryptd: max_cpu_qlen set to 1000
[    7.173864] SSE version of gcm_enc/dec engaged.
[    7.292202] checking generic (80000000 410000) vs hw (80000000 10000000)
[    7.292205] fb0: switching to inteldrmfb from EFI VGA
[    7.292250] Console: switching to colour dummy device 80x25
[    7.292532] [drm] Replacing VGA console driver
[    7.292752] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.292754] [drm] Driver supports precise vblank timestamp query.
[    7.300866] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    7.348263] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0
[    7.352377] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.353216] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[    7.439764] snd_hda_intel 0000:00:1b.0: Linked as a consumer to 0000:00:02.0
[    7.470050] intel_rapl: Found RAPL domain package
[    7.470054] intel_rapl: Found RAPL domain core
[    7.653922] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    7.654215] fbcon: inteldrmfb (fb0) is primary device
[    7.654383] Console: switching to colour frame buffer device 170x48
[    7.654429] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    7.696070] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    7.696075] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.696078] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    7.696080] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    7.696082] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    7.696085] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[    7.696088] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    7.700040] 8723bu: loading out-of-tree module taints kernel.
[    7.702218] 8723bu: module verification failed: signature and/or required key missing - tainting kernel
[    7.712006] RTL871X: module init start
[    7.712010] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40
[    7.712011] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40
[    7.738167] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    7.738298] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    7.738417] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    7.738535] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[    7.851812] RTL871X: rtw_ndev_init(wlan0)
[    7.852739] usbcore: registered new interface driver rtl8723bu
[    7.852747] RTL871X: module init ret=0
[    7.907778] PKCS#7 signature not signed with a trusted key
[    7.916705] rtl8723bu 1-5:1.2 wlx38a28c601d98: renamed from wlan0
[   10.508276] audit: type=1400 audit(1577737994.747:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=625 comm="apparmor_parser"
[   10.508287] audit: type=1400 audit(1577737994.747:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=625 comm="apparmor_parser"
[   10.508294] audit: type=1400 audit(1577737994.747:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=625 comm="apparmor_parser"
[   10.512641] audit: type=1400 audit(1577737994.751:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=622 comm="apparmor_parser"
[   10.512651] audit: type=1400 audit(1577737994.751:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=622 comm="apparmor_parser"
[   10.512657] audit: type=1400 audit(1577737994.751:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=622 comm="apparmor_parser"
[   10.512661] audit: type=1400 audit(1577737994.751:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=622 comm="apparmor_parser"
[   10.515500] audit: type=1400 audit(1577737994.751:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=627 comm="apparmor_parser"
[   10.516547] audit: type=1400 audit(1577737994.755:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=626 comm="apparmor_parser"
[   10.516557] audit: type=1400 audit(1577737994.755:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=626 comm="apparmor_parser"
[   10.790457] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.790460] Bluetooth: BNEP filters: protocol multicast
[   10.790469] Bluetooth: BNEP socket layer initialized
[   12.173097] RTL871X: RTW_ADAPTIVITY_EN_
[   12.173100] AUTO, chplan:0x20, Regulation:0,0
[   12.173103] RTL871X: RTW_ADAPTIVITY_MODE_
[   12.173103] NORMAL
[   12.314796] broken atomic modeset userspace detected, disabling atomic
[   14.758656] RTL871X: rtw_set_802_11_connect(wlx38a28c601d98)  fw_state=0x00000008
[   14.943308] RTL871X: start auth
[   14.950676] RTL871X: auth success, start assoc
[   14.954305] RTL871X: rtw_cfg80211_indicate_connect(wlx38a28c601d98) BSS not found !!
[   14.954314] RTL871X: assoc success
[   14.972653] RTL871X: send eapol packet
[   14.982275] RTL871X: send eapol packet
[   14.982884] IPv6: ADDRCONF(NETDEV_CHANGE): wlx38a28c601d98: link becomes ready
[   15.172464] RTL871X: set pairwise key camid:4, addr:44:ce:7d:f3:a1:ce, kid:0, type:AES
[   15.174410] RTL871X: set group key camid:5, addr:44:ce:7d:f3:a1:ce, kid:1, type:AES
[   17.209739] Bluetooth: RFCOMM TTY layer initialized
[   17.209759] Bluetooth: RFCOMM socket layer initialized
[   17.209786] Bluetooth: RFCOMM ver 1.11
[   21.353783] rfkill: input handler disabled
[  501.018770] perf: interrupt took too long (2522 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
[  631.934700] perf: interrupt took too long (3198 > 3152), lowering kernel.perf_event_max_sample_rate to 62500
[  815.438900] kauditd_printk_skb: 22 callbacks suppressed
[  815.438903] audit: type=1400 audit(1577738799.846:34): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.vlc" pid=2061 comm="apparmor_parser"
[  815.683172] audit: type=1400 audit(1577738800.091:35): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.vlc.vlc" pid=2062 comm="apparmor_parser"
[  820.629097] audit: type=1400 audit(1577738805.039:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.vlc" pid=2126 comm="apparmor_parser"
[  822.063592] audit: type=1400 audit(1577738806.471:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.vlc.vlc" pid=2127 comm="apparmor_parser"
[  822.106556] audit: type=1400 audit(1577738806.515:38): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/7270/usr/lib/snapd/snap-confine" pid=2129 comm="apparmor_parser"
[  822.106565] audit: type=1400 audit(1577738806.515:39): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/7270/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2129 comm="apparmor_parser"
[  822.122575] audit: type=1400 audit(1577738806.531:40): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=2131 comm="apparmor_parser"
[  822.123623] audit: type=1400 audit(1577738806.531:41): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=2132 comm="apparmor_parser"
[  826.773904] perf: interrupt took too long (4013 > 3997), lowering kernel.perf_event_max_sample_rate to 49750
[  923.556724] audit: type=1400 audit(1577738907.950:42): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.libreoffice.draw" pid=2325 comm="apparmor_parser"
[  923.557434] audit: type=1400 audit(1577738907.950:43): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.libreoffice" pid=2322 comm="apparmor_parser"
[  923.724712] audit: type=1400 audit(1577738908.117:44): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.libreoffice.base" pid=2323 comm="apparmor_parser"
[  923.939404] audit: type=1400 audit(1577738908.333:45): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.libreoffice.calc" pid=2324 comm="apparmor_parser"
[  923.975737] audit: type=1400 audit(1577738908.369:46): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.libreoffice.filebug" pid=2326 comm="apparmor_parser"
[  924.118917] audit: type=1400 audit(1577738908.513:47): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.libreoffice.impress" pid=2327 comm="apparmor_parser"
[  924.358700] audit: type=1400 audit(1577738908.753:48): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.libreoffice.writer" pid=2330 comm="apparmor_parser"
[  924.388995] audit: type=1400 audit(1577738908.781:49): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.libreoffice.math" pid=2329 comm="apparmor_parser"
[  924.458828] audit: type=1400 audit(1577738908.849:50): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.libreoffice.libreoffice" pid=2328 comm="apparmor_parser"
[  939.694427] audit: type=1400 audit(1577738924.077:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.libreoffice.base" pid=2488 comm="apparmor_parser"
[  940.200947] audit: type=1400 audit(1577738924.581:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.libreoffice.draw" pid=2490 comm="apparmor_parser"
[  940.610317] audit: type=1400 audit(1577738924.989:53): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.libreoffice.calc" pid=2489 comm="apparmor_parser"
[  940.643772] audit: type=1400 audit(1577738925.025:54): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.libreoffice" pid=2487 comm="apparmor_parser"
[  940.964874] audit: type=1400 audit(1577738925.345:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.libreoffice.filebug" pid=2491 comm="apparmor_parser"
[  942.929795] audit: type=1400 audit(1577738927.311:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.libreoffice.impress" pid=2492 comm="apparmor_parser"
[  942.987279] audit: type=1400 audit(1577738927.367:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.libreoffice.writer" pid=2496 comm="apparmor_parser"
[  943.575383] audit: type=1400 audit(1577738927.955:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.libreoffice.libreoffice" pid=2494 comm="apparmor_parser"
[  944.471965] audit: type=1400 audit(1577738928.851:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.libreoffice.math" pid=2495 comm="apparmor_parser"
[  944.497640] audit: type=1400 audit(1577738928.879:60): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/7270/usr/lib/snapd/snap-confine" pid=2498 comm="apparmor_parser"
[ 1095.197346] perf: interrupt took too long (5029 > 5016), lowering kernel.perf_event_max_sample_rate to 39750

Hors ligne

#10 Le 30/12/2019, à 22:08

Nuliel

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

Ok, les parties intéressantes:

[    3.089042] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    3.093012] i8042: Detected active multiplexing controller, rev 1.1
[    3.094785] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.094810] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    3.094933] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    3.095033] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    3.095136] serio: i8042 AUX3 port at 0x60,0x64 irq 12

[    3.688107] i2c_hid i2c-SYNA3602:00: HID over i2c has not been provided an Int IRQ
[    3.688163] i2c_hid: probe of i2c-SYNA3602:00 failed with error -22

Tu peux tenter de démarrer le pc, appuyer sur shift pour afficher le menu grub, puis ensuite mettre i8042.nomux=1 i8042.reset entre quiet et splash, de sorte à avoir

quiet i8042.nomux=1 i8042.reset splash

Il faut faire F10 pour démarrer, et tu pourras tester le touchpad.

Et le rapport de bug qui va bien: https://bugzilla.redhat.com/show_bug.cgi?id=1526312
Il y a beaucoup de rapports de bug, normalement le problème a été réglé depuis le noyau 4.19 . Je comprends pas trop pourquoi ce problème remonte

Dernière modification par Nuliel (Le 30/12/2019, à 22:24)

Hors ligne

#11 Le 30/12/2019, à 22:30

magaliFP

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

Naziel a écrit :

Tu peux tenter de démarrer le pc, appuyer sur shift pour afficher le menu grub, puis ensuite mettre i8042.nomux=1 i8042.reset entre quiet et splash, de sorte à avoir

quiet i8042.nomux=1 i8042.reset splash

Je dois taper

quiet i8042.nomux=1 i8042.reset splash

?
ou trouver ces mots et rajouter quiet et splash.
Je suis un peu ( beaucoup ) perdue.

Merci

Dernière modification par magaliFP (Le 30/12/2019, à 22:31)

Hors ligne

#12 Le 30/12/2019, à 22:48

Nuliel

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

Je vais te donner une méthode plus simple:

Tu peux faire

sudo nano /etc/default/grub

l'éditeur de texte nano s'ouvre, il faut remplacer

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"

par

GRUB_CMDLINE_LINUX_DEFAULT="quiet i8042.nomux=1 i8042.reset splash"

puis tu fais ctrl+o puis entrée pour enregistrer, puis ctrl+x pour quitter, puis de retour dans le terminal, tu fais

sudo update-grub

et tu redémarres et tu testes le touchpad.

Dernière modification par Nuliel (Le 30/12/2019, à 22:49)

Hors ligne

#13 Le 30/12/2019, à 22:54

magaliFP

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

merci pour la méthode simplifiée.
Le touchpad ne fonctionne pas....

Hors ligne

#14 Le 30/12/2019, à 22:58

Nuliel

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

Du coup, tu peux refaire la méthode pour enlever i8042.nomux=1 i8042.reset proprement.

Je vais continuer demain, on essaiera de trouver un noyau adapté à ton touchpad (on testera un noyau via ukuu )

Hors ligne

#15 Le 30/12/2019, à 23:01

magaliFP

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

Naziel a écrit :

Du coup, tu peux refaire la méthode pour enlever i8042.nomux=1 i8042.reset proprement.

je supprime la ligne ? ou je remet celle qui avait avant la modification ?

Naziel a écrit :

Je vais continuer demain, on essaiera de trouver un noyau adapté à ton touchpad (on testera un noyau via ukuu )

Ok merci beaucoup

Hors ligne

#16 Le 30/12/2019, à 23:06

Nuliel

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

Tu peux remettre la ligne avant modification, donc

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"

(pense à passer sudo update-grub après)

Hors ligne

#17 Le 30/12/2019, à 23:10

magaliFP

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

 famille@famille:~$ sudo nano /etc/default/grub
[sudo] Mot de passe de famille : 
famille@famille:~$ sudo update-grub
Sourcing file `/etc/default/grub'
/usr/sbin/grub-mkconfig: 1: /etc/default/grub: If: not found
famille@famille:~$ 

Hors ligne

#18 Le 30/12/2019, à 23:11

Nuliel

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

Ah, ne redémarre pas, tu peux donner

cat /etc/default/grub

Hors ligne

#19 Le 30/12/2019, à 23:13

magaliFP

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

famille@famille:~$ cat /etc/default/grub
 If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
famille@famille:~$ 

Hors ligne

#20 Le 30/12/2019, à 23:15

Nuliel

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

Tu as effacé un # sur la première ligne, je te laisse la rajouter de sorte à avoir

# If you change this file, run 'update-grub' afterwards to update

puis suivre à nouveau la méthode

Dernière modification par Nuliel (Le 30/12/2019, à 23:15)

Hors ligne

#21 Le 30/12/2019, à 23:19

magaliFP

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

erreur réparée.
Merci

Hors ligne

#22 Le 30/12/2019, à 23:20

Nuliel

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

Nickel!
A demain

Hors ligne

#23 Le 31/12/2019, à 16:35

Nuliel

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

Me revoilà.

Tout d'abord, il faut commencer par réussir à obtenir le menu grub au démarrage. Comme tu n'avais pas réussi à obtenir le menu grub, on va l'afficher à chaque fois. Pour cela,
Tu peux faire

sudo nano /etc/default/grub

il faut remplacer

GRUB_TIMEOUT_STYLE=hidden

par

GRUB_TIMEOUT_STYLE=menu

puis tu fais ctrl+o puis entrée pour enregistrer, puis ctrl+x pour quitter, puis de retour dans le terminal, tu fais

sudo update-grub

et tu redémarres.
Normalement tu devrais tomber sur le menu grub. Le fonctionnement est le suivant:
- La première entrée permet de choisir le noyau le plus récent (et c'est celui qui est pris par défaut lorsque le menu grub n'apparaît pas).
- La deuxième entrée (options avancées) permet de choisir le noyau à utiliser. Ne prends pas recovery et upstart mais les autres.

Si tu as réussi à obtenir le menu grub et bien compris comment l'utiliser, on peut alors installer ukuu:

sudo apt-add-repository -y ppa:teejee2008/ppa
sudo apt-get install ukuu

lancer ukuu, le laisser télécharger l'index, redémarrer le pc, relancer ukuu (parce que sinon ça bug), installer le plus récent des noyau (celui qui est le plus haut dans la liste)
Si ukuu a réussi à installer le noyau, tu peux redémarrer le pc, dans le menu grub choisir le noyau que tu viens d'installer et tester le touchpad.
D'autres choses telles que la wifi risquent de ne plus fonctionner sur le noyau que tu as installé, mais c'est pas grave, le but est de savoir si le dernier noyau permet de faire fonctionner le touchpad.

A tout moment, tu peux redémarrer sur le noyau 5.0.0-37-generic (celui utilisé depuis le début de la discussion)

Hors ligne

#24 Le 31/12/2019, à 17:00

magaliFP

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

Bonjour,
Merci d'être de nouveau disponible.
Je n'arrive pas à faire apparaitre le menu Grub... desolée. Je démarre en appuyant sur shift et l'ordi demarre normalement ... j'ai essayé en appuyant sur echap et j'arrive sur le bios....

Hors ligne

#25 Le 31/12/2019, à 17:07

Nuliel

Re : Problème sur Thomson neo 14. Touchpad ne fonctionne pas

Justement, comme tu n'arrives pas à obtenir ce menu, il faudrait modifier GRUB_TIMEOUT_STYLE=hidden en GRUB_TIMEOUT_STYLE=menu afin qu'il apparaisse à chaque démarrage comme je l'explique dans la première partie du message précédent.

Hors ligne