[RÉSOLU] NVIDIA et driver propriétaire

jerm · Le 13/03/2021, à 11:00

Bonjour!

Depuis un moment, j'essaye de comprendre ce qui se passe avec mon pc.
Malgré une configuration qui devrait bien faire tourner les jeux, je me retrouve face à de gros ralentissements.
J'ai une carte GTX 1050 Ti, processeur Intel Pentium G2130 3.20GHz et une carte mère Asus B75M-Plus avec 16Go de ram.
Au niveau drivers, j'utilise le "Nouveau"... Dès que j'essaye de passer sur le driver propriétaire (le 460, recommandé et testé), j'ai un affichage surprenant:
Alors que tout semble indiquer que la résolution est en 1920x1080 à tous les niveaux, le rendu est une basse résolution... très basse résolution, même!
Pourtant, lorsque je lance par exemple Firefox, tout est normal à l'intérieur de la fenêtre, comme si seul KDE était affecté par le mauvais affichage.

Ici, le contenu de xorg.conf:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 460.39


Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Samsung SMB2430H"
    HorizSync       30.0 - 81.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
EndSection

Section "Screen"

# Removed Option "metamodes" "1920x1080_60 +0+0 {AllowGSYNC=Off}"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "DFP-1"
    Option         "metamodes" "nvidia-auto-select +0+0 {viewportin=1366x768, viewportout=1920x1079+0+0, AllowGSYNC=Off}"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

et le contenu de Xorg.0.log:

[    15.724] (--) Log file renamed from "/var/log/Xorg.pid-972.log" to "/var/log/Xorg.0.log"
[    15.725] 
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[    15.725] Build Operating System: Linux 4.15.0-130-generic x86_64 Ubuntu
[    15.725] Current Operating System: Linux jerom 5.4.0-66-generic #74-Ubuntu SMP Wed Jan 27 22:54:38 UTC 2021 x86_64
[    15.725] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-66-generic root=UUID=b9f82025-39f4-4b18-83dd-caa11af6d795 ro quiet splash vt.handoff=7
[    15.725] Build Date: 17 January 2021  09:13:31AM
[    15.725] xorg-server 2:1.20.9-2ubuntu1.2~20.04.1 (For technical support please see http://www.ubuntu.com/support) 
[    15.725] Current version of pixman: 0.38.4
[    15.725] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    15.725] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.725] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 13 08:26:42 2021
[    15.727] (==) Using config file: "/etc/X11/xorg.conf"
[    15.727] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    15.729] (==) ServerLayout "Layout0"
[    15.729] (**) |-->Screen "Screen0" (0)
[    15.729] (**) |   |-->Monitor "Monitor0"
[    15.730] (**) |   |-->Device "Device0"
[    15.730] (**) |-->Input Device "Keyboard0"
[    15.730] (**) |-->Input Device "Mouse0"
[    15.730] (**) Option "Xinerama" "0"
[    15.730] (==) Automatically adding devices
[    15.730] (==) Automatically enabling devices
[    15.730] (==) Automatically adding GPU devices
[    15.730] (==) Automatically binding GPU devices
[    15.730] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    15.735] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    15.735] 	Entry deleted from font path.
[    15.735] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    15.735] 	Entry deleted from font path.
[    15.735] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    15.735] 	Entry deleted from font path.
[    15.735] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    15.735] 	Entry deleted from font path.
[    15.735] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    15.735] 	Entry deleted from font path.
[    15.735] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    15.736] (==) ModulePath set to "/usr/lib/xorg/modules"
[    15.736] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    15.736] (WW) Disabling Keyboard0
[    15.736] (WW) Disabling Mouse0
[    15.736] (II) Loader magic: 0x55c1fee79020
[    15.736] (II) Module ABI versions:
[    15.736] 	X.Org ANSI C Emulation: 0.4
[    15.736] 	X.Org Video Driver: 24.1
[    15.736] 	X.Org XInput driver : 24.1
[    15.736] 	X.Org Server Extension : 10.0
[    15.737] (++) using VT number 1

[    15.737] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    15.738] (II) xfree86: Adding drm device (/dev/dri/card0)
[    15.740] (--) PCI:*(1@0:0:0) 10de:1c82:19da:2454 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[    15.740] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    15.740] (II) LoadModule: "dbe"
[    15.740] (II) Module "dbe" already built-in
[    15.740] (II) LoadModule: "extmod"
[    15.740] (II) Module "extmod" already built-in
[    15.740] (II) LoadModule: "glx"
[    15.744] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    15.772] (II) Module glx: vendor="X.Org Foundation"
[    15.772] 	compiled for 1.20.9, module version = 1.0.0
[    15.772] 	ABI class: X.Org Server Extension, version 10.0
[    15.772] (II) LoadModule: "nvidia"
[    15.774] (WW) Warning, couldn't open module nvidia
[    15.774] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    15.919] (==) Matched modesetting as autoconfigured driver 0
[    15.919] (==) Matched fbdev as autoconfigured driver 1
[    15.919] (==) Matched vesa as autoconfigured driver 2
[    15.919] (==) Assigned the driver to the xf86ConfigLayout
[    15.919] (II) LoadModule: "modesetting"
[    15.919] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    15.921] (II) Module modesetting: vendor="X.Org Foundation"
[    15.921] 	compiled for 1.20.9, module version = 1.20.9
[    15.921] 	Module class: X.Org Video Driver
[    15.921] 	ABI class: X.Org Video Driver, version 24.1
[    15.921] (II) LoadModule: "fbdev"
[    15.921] (WW) Warning, couldn't open module fbdev
[    15.921] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    15.921] (II) LoadModule: "vesa"
[    15.921] (WW) Warning, couldn't open module vesa
[    15.921] (EE) Failed to load module "vesa" (module does not exist, 0)
[    15.921] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    15.922] (II) modeset(0): using drv /dev/dri/card0
[    15.922] (**) modeset(0): Depth 24, (--) framebuffer bpp 32
[    15.922] (==) modeset(0): RGB weight 888
[    15.922] (==) modeset(0): Default visual is TrueColor
[    15.922] (II) Loading sub module "glamoregl"
[    15.922] (II) LoadModule: "glamoregl"
[    15.922] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    15.933] (II) Module glamoregl: vendor="X.Org Foundation"
[    15.933] 	compiled for 1.20.9, module version = 1.0.1
[    15.933] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    16.310] (II) modeset(0): glamor X acceleration enabled on NV137
[    16.310] (II) modeset(0): glamor initialized
[    16.311] (II) modeset(0): Output DVI-D-1 using monitor section Monitor0
[    16.377] (II) modeset(0): Output HDMI-1 has no monitor section
[    16.438] (II) modeset(0): Output DP-1 has no monitor section
[    16.439] (II) modeset(0): EDID for output DVI-D-1
[    16.505] (WW) EDID timing clock 148.50 exceeds claimed max 5MHz, fixing
[    16.505] (II) Quirked EDID physical size to 0x0 cm
[    16.505] (II) modeset(0): EDID for output HDMI-1
[    16.505] (II) modeset(0): Manufacturer: SAM  Model: 64e  Serial#: 1347760692
[    16.505] (II) modeset(0): Year: 2010  Week: 45
[    16.505] (II) modeset(0): EDID Version: 1.3
[    16.505] (II) modeset(0): Digital Display Input
[    16.505] (II) modeset(0): Indeterminate output size
[    16.505] (II) modeset(0): Gamma: 2.20
[    16.505] (II) modeset(0): No DPMS capabilities specified
[    16.505] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    16.506] (II) modeset(0): First detailed timing is preferred mode
[    16.506] (II) modeset(0): redX: 0.649 redY: 0.338   greenX: 0.289 greenY: 0.609
[    16.506] (II) modeset(0): blueX: 0.146 blueY: 0.070   whiteX: 0.312 whiteY: 0.329
[    16.506] (II) modeset(0): Supported established timings:
[    16.506] (II) modeset(0): 720x400@70Hz
[    16.506] (II) modeset(0): 640x480@60Hz
[    16.506] (II) modeset(0): 640x480@67Hz
[    16.506] (II) modeset(0): 640x480@72Hz
[    16.506] (II) modeset(0): 640x480@75Hz
[    16.506] (II) modeset(0): 800x600@56Hz
[    16.506] (II) modeset(0): 800x600@60Hz
[    16.506] (II) modeset(0): 800x600@72Hz
[    16.506] (II) modeset(0): 800x600@75Hz
[    16.506] (II) modeset(0): 832x624@75Hz
[    16.506] (II) modeset(0): 1024x768@60Hz
[    16.506] (II) modeset(0): 1024x768@70Hz
[    16.506] (II) modeset(0): 1024x768@75Hz
[    16.506] (II) modeset(0): 1280x1024@75Hz
[    16.506] (II) modeset(0): 1152x864@75Hz
[    16.506] (II) modeset(0): Manufacturer's mask: 0
[    16.506] (II) modeset(0): Supported standard timings:
[    16.506] (II) modeset(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    16.506] (II) modeset(0): #1: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    16.506] (II) modeset(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    16.506] (II) modeset(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    16.506] (II) modeset(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    16.506] (II) modeset(0): #5: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[    16.506] (II) modeset(0): #6: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    16.506] (II) modeset(0): #7: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    16.506] (II) modeset(0): Supported detailed timing:
[    16.506] (II) modeset(0): clock: 148.5 MHz   Image Size:  160 x 90 mm
[    16.506] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    16.506] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    16.506] (II) modeset(0): Supported detailed timing:
[    16.506] (II) modeset(0): clock: 74.2 MHz   Image Size:  160 x 90 mm
[    16.506] (II) modeset(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[    16.506] (II) modeset(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    16.506] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 149 MHz
[    16.506] (II) modeset(0): Monitor name: SMB2430H
[    16.506] (II) modeset(0): Supported detailed timing:
[    16.506] (II) modeset(0): clock: 74.2 MHz   Image Size:  160 x 90 mm
[    16.506] (II) modeset(0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
[    16.506] (II) modeset(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[    16.506] (II) modeset(0): Supported detailed timing:
[    16.506] (II) modeset(0): clock: 74.2 MHz   Image Size:  160 x 90 mm
[    16.506] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    16.506] (II) modeset(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[    16.506] (II) modeset(0): Supported detailed timing:
[    16.506] (II) modeset(0): clock: 74.2 MHz   Image Size:  160 x 90 mm
[    16.506] (II) modeset(0): h_active: 1280  h_sync: 1720  h_sync_end 1760 h_blank_end 1980 h_border: 0
[    16.506] (II) modeset(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    16.506] (II) modeset(0): Supported detailed timing:
[    16.506] (II) modeset(0): clock: 27.0 MHz   Image Size:  160 x 90 mm
[    16.506] (II) modeset(0): h_active: 720  h_sync: 732  h_sync_end 796 h_blank_end 864 h_border: 0
[    16.506] (II) modeset(0): v_active: 576  v_sync: 581  v_sync_end 586 v_blanking: 625 v_border: 0
[    16.506] (II) modeset(0): Supported detailed timing:
[    16.506] (II) modeset(0): clock: 27.0 MHz   Image Size:  160 x 90 mm
[    16.506] (II) modeset(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[    16.506] (II) modeset(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[    16.506] (II) modeset(0): Number of EDID sections to follow: 1
[    16.506] (II) modeset(0): EDID (in hex):
[    16.506] (II) modeset(0): 	00ffffffffffff004c2d4e0634325550
[    16.506] (II) modeset(0): 	2d140103801009780a6041a6564a9c25
[    16.506] (II) modeset(0): 	125054bfef80714f8100814081809500
[    16.506] (II) modeset(0): 	950fa940b300023a801871382d40582c
[    16.506] (II) modeset(0): 	4500a05a0000001e011d007251d01e20
[    16.506] (II) modeset(0): 	6e285500a05a0000001e000000fd0038
[    16.506] (II) modeset(0): 	4b1e5100000a202020202020000000fc
[    16.506] (II) modeset(0): 	00534d4232343330480a20202020017a
[    16.506] (II) modeset(0): 	02031cf14890041f0514131203230907
[    16.506] (II) modeset(0): 	078301000066030c00100080011d80d0
[    16.506] (II) modeset(0): 	721c1620102c2580a05a0000009e011d
[    16.506] (II) modeset(0): 	8018711c1620582c2500a05a0000009e
[    16.506] (II) modeset(0): 	011d00bc52d01e20b8285540a05a0000
[    16.506] (II) modeset(0): 	001e8c0ad090204031200c405500a05a
[    16.506] (II) modeset(0): 	000000188c0ad08a20e02d10103e9600
[    16.506] (II) modeset(0): 	a05a0000001800000000000000000046
[    16.506] (II) modeset(0): Not using mode "1600x1200" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Not using default mode "1280x720" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Not using default mode "1440x810" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Not using default mode "1440x810" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Not using default mode "1600x900" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Not using default mode "1600x900" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan)
[    16.506] (II) modeset(0): Printing probed modes for output HDMI-1
[    16.506] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    16.506] (II) modeset(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    16.506] (II) modeset(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[    16.506] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    16.506] (II) modeset(0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    16.506] (II) modeset(0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    16.506] (II) modeset(0): Modeline "1920x1080i"x59.9   74.18  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[    16.506] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    16.506] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    16.507] (II) modeset(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[    16.507] (II) modeset(0): Modeline "1400x1050"x70.0  145.06  1400 1496 1648 1896  1050 1051 1054 1093 -hsync +vsync (76.5 kHz d)
[    16.507] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    16.507] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[    16.507] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[    16.507] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    16.507] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    16.507] (II) modeset(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    16.507] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)
[    16.507] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    16.507] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[    16.507] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[    16.507] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    16.507] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[    16.507] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[    16.507] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    16.507] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    16.507] (II) modeset(0): Modeline "1280x800"x60.0  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[    16.507] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[    16.507] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    16.507] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    16.507] (II) modeset(0): Modeline "1152x864"x75.0  104.99  1152 1224 1352 1552  864 865 868 902 -hsync +vsync (67.6 kHz d)
[    16.507] (II) modeset(0): Modeline "1152x864"x70.0   96.77  1152 1224 1344 1536  864 865 868 900 -hsync +vsync (63.0 kHz d)
[    16.507] (II) modeset(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)
[    16.507] (II) modeset(0): Modeline "1280x720"x60.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    16.507] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    16.507] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    16.507] (II) modeset(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    16.507] (II) modeset(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    16.507] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    16.507] (II) modeset(0): Modeline "1024x768"x60.0  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    16.507] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    16.507] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    16.507] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    16.507] (II) modeset(0): Modeline "960x720"x75.0  148.50  960 1032 1144 1320  720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[    16.507] (II) modeset(0): Modeline "960x720"x60.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    16.507] (II) modeset(0): Modeline "928x696"x75.0  144.00  928 992 1104 1280  696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[    16.507] (II) modeset(0): Modeline "928x696"x60.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    16.507] (II) modeset(0): Modeline "896x672"x75.0  130.50  896 944 1052 1228  672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[    16.507] (II) modeset(0): Modeline "896x672"x60.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    16.507] (II) modeset(0): Modeline "1024x576"x60.0   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    16.507] (II) modeset(0): Modeline "1024x576"x60.0   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    16.507] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    16.507] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    16.507] (II) modeset(0): Modeline "960x600"x59.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    16.507] (II) modeset(0): Modeline "960x600"x60.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    16.507] (II) modeset(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    16.507] (II) modeset(0): Modeline "960x540"x60.0   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    16.507] (II) modeset(0): Modeline "960x540"x60.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    16.507] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    16.507] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    16.507] (II) modeset(0): Modeline "800x600"x75.0  101.25  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[    16.507] (II) modeset(0): Modeline "800x600"x70.0   94.50  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[    16.507] (II) modeset(0): Modeline "800x600"x65.0   87.75  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[    16.507] (II) modeset(0): Modeline "800x600"x60.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    16.507] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    16.507] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    16.507] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    16.507] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    16.507] (II) modeset(0): Modeline "840x525"x75.0   93.50  840 900 988 1136  525 526 529 549 doublescan -hsync +vsync (82.3 kHz d)
[    16.507] (II) modeset(0): Modeline "840x525"x69.9   87.00  840 900 988 1136  525 526 529 548 doublescan -hsync +vsync (76.6 kHz d)
[    16.507] (II) modeset(0): Modeline "840x525"x60.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    16.507] (II) modeset(0): Modeline "840x525"x59.9   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    16.507] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    16.507] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    16.507] (II) modeset(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    16.507] (II) modeset(0): Modeline "800x512"x60.2   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    16.507] (II) modeset(0): Modeline "700x525"x74.8   77.90  700 732 892 956  525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[    16.507] (II) modeset(0): Modeline "700x525"x70.1   72.53  700 748 824 948  525 525 527 546 doublescan -hsync +vsync (76.5 kHz d)
[    16.507] (II) modeset(0): Modeline "700x525"x60.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    16.507] (II) modeset(0): Modeline "800x450"x59.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    16.507] (II) modeset(0): Modeline "800x450"x59.8   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    16.507] (II) modeset(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    16.507] (II) modeset(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    16.507] (II) modeset(0): Modeline "640x512"x75.0   67.50  640 648 720 844  512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[    16.507] (II) modeset(0): Modeline "640x512"x60.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    16.507] (II) modeset(0): Modeline "720x450"x59.9   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    16.507] (II) modeset(0): Modeline "700x450"x60.0   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    16.507] (II) modeset(0): Modeline "700x450"x59.9   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    16.507] (II) modeset(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    16.507] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    16.507] (II) modeset(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    16.507] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz d)
[    16.507] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    16.507] (II) modeset(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    16.507] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    16.507] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    16.507] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    16.507] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    16.507] (II) modeset(0): Modeline "684x384"x59.9   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    16.507] (II) modeset(0): Modeline "684x384"x59.9   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    16.507] (II) modeset(0): Modeline "680x384"x59.8   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    16.507] (II) modeset(0): Modeline "680x384"x60.0   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    16.507] (II) modeset(0): Modeline "640x400"x59.9   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    16.507] (II) modeset(0): Modeline "640x400"x60.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    16.507] (II) modeset(0): Modeline "576x432"x75.0   54.00  576 608 672 800  432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[    16.507] (II) modeset(0): Modeline "576x432"x75.0   52.49  576 612 676 776  432 432 434 451 doublescan -hsync +vsync (67.6 kHz d)
[    16.507] (II) modeset(0): Modeline "576x432"x70.0   48.38  576 612 672 768  432 432 434 450 doublescan -hsync +vsync (63.0 kHz d)
[    16.507] (II) modeset(0): Modeline "576x432"x60.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    16.507] (II) modeset(0): Modeline "640x360"x59.9   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    16.507] (II) modeset(0): Modeline "640x360"x59.8   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    16.507] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    16.507] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    16.507] (II) modeset(0): Modeline "512x384"x75.0   39.38  512 520 568 656  384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[    16.507] (II) modeset(0): Modeline "512x384"x70.1   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[    16.507] (II) modeset(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    16.507] (II) modeset(0): Modeline "512x288"x60.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    16.507] (II) modeset(0): Modeline "512x288"x59.9   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    16.507] (II) modeset(0): Modeline "416x312"x74.7   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[    16.507] (II) modeset(0): Modeline "480x270"x59.6   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    16.507] (II) modeset(0): Modeline "480x270"x59.8   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    16.507] (II) modeset(0): Modeline "400x300"x72.2   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[    16.507] (II) modeset(0): Modeline "400x300"x75.1   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[    16.507] (II) modeset(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    16.507] (II) modeset(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    16.507] (II) modeset(0): Modeline "432x243"x59.9   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    16.507] (II) modeset(0): Modeline "432x243"x59.6   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    16.507] (II) modeset(0): Modeline "320x240"x72.8   15.75  320 332 352 416  240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[    16.507] (II) modeset(0): Modeline "320x240"x75.0   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[    16.507] (II) modeset(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    16.507] (II) modeset(0): Modeline "360x202"x59.5   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    16.507] (II) modeset(0): Modeline "360x202"x59.1   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    16.508] (II) modeset(0): Modeline "320x180"x59.8    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    16.508] (II) modeset(0): Modeline "320x180"x59.3    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    16.570] (II) modeset(0): EDID for output DP-1
[    16.570] (II) modeset(0): Output DVI-D-1 disconnected
[    16.570] (II) modeset(0): Output HDMI-1 connected
[    16.570] (II) modeset(0): Output DP-1 disconnected
[    16.570] (II) modeset(0): Using exact sizes for initial modes
[    16.570] (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +0+0
[    16.570] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    16.570] (==) modeset(0): DPI set to (96, 96)
[    16.570] (II) Loading sub module "fb"
[    16.570] (II) LoadModule: "fb"
[    16.570] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.571] (II) Module fb: vendor="X.Org Foundation"
[    16.571] 	compiled for 1.20.9, module version = 1.0.0
[    16.571] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    16.612] (==) modeset(0): Backing store enabled
[    16.612] (==) modeset(0): Silken mouse enabled
[    16.616] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    16.616] (**) modeset(0): DPMS enabled
[    16.616] (WW) modeset(0): Option "Stereo" is not used
[    16.616] (WW) modeset(0): Option "nvidiaXineramaInfoOrder" is not used
[    16.616] (WW) modeset(0): Option "metamodes" is not used
[    16.616] (WW) modeset(0): Option "SLI" is not used
[    16.616] (WW) modeset(0): Option "MultiGPU" is not used
[    16.616] (WW) modeset(0): Option "BaseMosaic" is not used
[    16.617] (II) modeset(0): [DRI2] Setup complete
[    16.617] (II) modeset(0): [DRI2]   DRI driver: nouveau
[    16.617] (II) modeset(0): [DRI2]   VDPAU driver: nouveau
[    16.617] (II) Initializing extension Generic Event Extension
[    16.617] (II) Initializing extension SHAPE
[    16.617] (II) Initializing extension MIT-SHM
[    16.618] (II) Initializing extension XInputExtension
[    16.618] (II) Initializing extension XTEST
[    16.619] (II) Initializing extension BIG-REQUESTS
[    16.619] (II) Initializing extension SYNC
[    16.619] (II) Initializing extension XKEYBOARD
[    16.619] (II) Initializing extension XC-MISC
[    16.619] (II) Initializing extension SECURITY
[    16.619] (II) Initializing extension XFIXES
[    16.619] (II) Initializing extension RENDER
[    16.619] (II) Initializing extension RANDR
[    16.619] (II) Initializing extension COMPOSITE
[    16.620] (II) Initializing extension DAMAGE
[    16.620] (II) Initializing extension MIT-SCREEN-SAVER
[    16.620] (II) Initializing extension DOUBLE-BUFFER
[    16.620] (II) Initializing extension RECORD
[    16.620] (II) Initializing extension DPMS
[    16.620] (II) Initializing extension Present
[    16.620] (II) Initializing extension DRI3
[    16.620] (II) Initializing extension X-Resource
[    16.620] (II) Initializing extension XVideo
[    16.620] (II) Initializing extension XVideo-MotionCompensation
[    16.620] (II) Initializing extension SELinux
[    16.620] (II) SELinux: Disabled on system
[    16.620] (II) Initializing extension GLX
[    16.625] (II) AIGLX: Loaded and initialized nouveau
[    16.625] (II) GLX: Initialized DRI2 GL provider for screen 0
[    16.625] (II) Initializing extension XFree86-VidModeExtension
[    16.625] (II) Initializing extension XFree86-DGA
[    16.625] (II) Initializing extension XFree86-DRI
[    16.625] (II) Initializing extension DRI2
[    16.628] (II) modeset(0): Damage tracking initialized
[    16.628] (II) modeset(0): Setting screen physical size to 508 x 285
[    16.687] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    16.687] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    16.687] (II) LoadModule: "libinput"
[    16.687] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    16.696] (II) Module libinput: vendor="X.Org Foundation"
[    16.696] 	compiled for 1.20.4, module version = 0.29.0
[    16.696] 	Module class: X.Org XInput Driver
[    16.696] 	ABI class: X.Org XInput driver, version 24.1
[    16.696] (II) Using input driver 'libinput' for 'Power Button'
[    16.696] (**) Power Button: always reports core events
[    16.696] (**) Option "Device" "/dev/input/event1"
[    16.699] (**) Option "_source" "server/udev"
[    16.709] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    16.709] (II) event1  - Power Button: device is a keyboard
[    16.709] (II) event1  - Power Button: device removed
[    16.722] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    16.722] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    16.722] (**) Option "xkb_model" "pc105"
[    16.722] (**) Option "xkb_layout" "fr"
[    16.722] (**) Option "xkb_variant" "latin9"
[    16.740] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    16.740] (II) event1  - Power Button: device is a keyboard
[    16.741] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    16.741] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    16.741] (II) Using input driver 'libinput' for 'Power Button'
[    16.741] (**) Power Button: always reports core events
[    16.741] (**) Option "Device" "/dev/input/event0"
[    16.741] (**) Option "_source" "server/udev"
[    16.741] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    16.741] (II) event0  - Power Button: device is a keyboard
[    16.741] (II) event0  - Power Button: device removed
[    16.754] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    16.754] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    16.754] (**) Option "xkb_model" "pc105"
[    16.754] (**) Option "xkb_layout" "fr"
[    16.754] (**) Option "xkb_variant" "latin9"
[    16.755] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    16.755] (II) event0  - Power Button: device is a keyboard
[    16.755] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
[    16.755] (II) No input driver specified, ignoring this device.
[    16.755] (II) This device may have been added with another device file.
[    16.756] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[    16.756] (II) No input driver specified, ignoring this device.
[    16.756] (II) This device may have been added with another device file.
[    16.756] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[    16.756] (II) No input driver specified, ignoring this device.
[    16.756] (II) This device may have been added with another device file.
[    16.756] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event16)
[    16.756] (II) No input driver specified, ignoring this device.
[    16.756] (II) This device may have been added with another device file.
[    16.757] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event17)
[    16.757] (II) No input driver specified, ignoring this device.
[    16.757] (II) This device may have been added with another device file.
[    16.757] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event18)
[    16.757] (II) No input driver specified, ignoring this device.
[    16.757] (II) This device may have been added with another device file.
[    16.758] (II) config/udev: Adding input device Logitech K270 (/dev/input/event6)
[    16.758] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[    16.758] (II) Using input driver 'libinput' for 'Logitech K270'
[    16.758] (**) Logitech K270: always reports core events
[    16.758] (**) Option "Device" "/dev/input/event6"
[    16.758] (**) Option "_source" "server/udev"
[    16.759] (II) event6  - Logitech K270: is tagged by udev as: Keyboard
[    16.759] (II) event6  - Logitech K270: device is a keyboard
[    16.760] (II) event6  - Logitech K270: device removed
[    16.778] (II) libinput: Logitech K270: needs a virtual subdevice
[    16.778] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:4003.0007/input/input22/event6"
[    16.778] (II) XINPUT: Adding extended input device "Logitech K270" (type: MOUSE, id 8)
[    16.778] (**) Option "AccelerationScheme" "none"
[    16.778] (**) Logitech K270: (accel) selected scheme none/0
[    16.778] (**) Logitech K270: (accel) acceleration factor: 2.000
[    16.778] (**) Logitech K270: (accel) acceleration threshold: 4
[    16.779] (II) event6  - Logitech K270: is tagged by udev as: Keyboard
[    16.779] (II) event6  - Logitech K270: device is a keyboard
[    16.780] (II) config/udev: Adding input device CHERRY USB Wireless Device (/dev/input/event2)
[    16.780] (**) CHERRY USB Wireless Device: Applying InputClass "libinput keyboard catchall"
[    16.780] (II) Using input driver 'libinput' for 'CHERRY USB Wireless Device'
[    16.780] (**) CHERRY USB Wireless Device: always reports core events
[    16.780] (**) Option "Device" "/dev/input/event2"
[    16.780] (**) Option "_source" "server/udev"
[    16.782] (II) event2  - CHERRY USB Wireless Device: is tagged by udev as: Keyboard
[    16.782] (II) event2  - CHERRY USB Wireless Device: device is a keyboard
[    16.782] (II) event2  - CHERRY USB Wireless Device: device removed
[    16.802] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:046A:B102.0004/input/input7/event2"
[    16.802] (II) XINPUT: Adding extended input device "CHERRY USB Wireless Device" (type: KEYBOARD, id 9)
[    16.802] (**) Option "xkb_model" "pc105"
[    16.802] (**) Option "xkb_layout" "fr"
[    16.802] (**) Option "xkb_variant" "latin9"
[    16.803] (II) event2  - CHERRY USB Wireless Device: is tagged by udev as: Keyboard
[    16.803] (II) event2  - CHERRY USB Wireless Device: device is a keyboard
[    16.804] (II) config/udev: Adding input device CHERRY USB Wireless Device Consumer Control (/dev/input/event5)
[    16.804] (**) CHERRY USB Wireless Device Consumer Control: Applying InputClass "libinput keyboard catchall"
[    16.804] (II) Using input driver 'libinput' for 'CHERRY USB Wireless Device Consumer Control'
[    16.804] (**) CHERRY USB Wireless Device Consumer Control: always reports core events
[    16.804] (**) Option "Device" "/dev/input/event5"
[    16.804] (**) Option "_source" "server/udev"
[    16.806] (II) event5  - CHERRY USB Wireless Device Consumer Control: is tagged by udev as: Keyboard
[    16.806] (II) event5  - CHERRY USB Wireless Device Consumer Control: device is a keyboard
[    16.806] (II) event5  - CHERRY USB Wireless Device Consumer Control: device removed
[    16.826] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046A:B102.0005/input/input10/event5"
[    16.826] (II) XINPUT: Adding extended input device "CHERRY USB Wireless Device Consumer Control" (type: KEYBOARD, id 10)
[    16.826] (**) Option "xkb_model" "pc105"
[    16.826] (**) Option "xkb_layout" "fr"
[    16.826] (**) Option "xkb_variant" "latin9"
[    16.827] (II) event5  - CHERRY USB Wireless Device Consumer Control: is tagged by udev as: Keyboard
[    16.827] (II) event5  - CHERRY USB Wireless Device Consumer Control: device is a keyboard
[    16.828] (II) config/udev: Adding input device CHERRY USB Wireless Device Mouse (/dev/input/event3)
[    16.828] (**) CHERRY USB Wireless Device Mouse: Applying InputClass "libinput pointer catchall"
[    16.828] (II) Using input driver 'libinput' for 'CHERRY USB Wireless Device Mouse'
[    16.828] (**) CHERRY USB Wireless Device Mouse: always reports core events
[    16.828] (**) Option "Device" "/dev/input/event3"
[    16.828] (**) Option "_source" "server/udev"
[    16.830] (II) event3  - CHERRY USB Wireless Device Mouse: is tagged by udev as: Mouse
[    16.830] (II) event3  - CHERRY USB Wireless Device Mouse: device is a pointer
[    16.830] (II) event3  - CHERRY USB Wireless Device Mouse: device removed
[    16.866] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046A:B102.0005/input/input8/event3"
[    16.866] (II) XINPUT: Adding extended input device "CHERRY USB Wireless Device Mouse" (type: MOUSE, id 11)
[    16.866] (**) Option "AccelerationScheme" "none"
[    16.866] (**) CHERRY USB Wireless Device Mouse: (accel) selected scheme none/0
[    16.866] (**) CHERRY USB Wireless Device Mouse: (accel) acceleration factor: 2.000
[    16.866] (**) CHERRY USB Wireless Device Mouse: (accel) acceleration threshold: 4
[    16.867] (II) event3  - CHERRY USB Wireless Device Mouse: is tagged by udev as: Mouse
[    16.867] (II) event3  - CHERRY USB Wireless Device Mouse: device is a pointer
[    16.868] (II) config/udev: Adding input device CHERRY USB Wireless Device Mouse (/dev/input/mouse0)
[    16.868] (II) No input driver specified, ignoring this device.
[    16.868] (II) This device may have been added with another device file.
[    16.869] (II) config/udev: Adding input device CHERRY USB Wireless Device System Control (/dev/input/event4)
[    16.869] (**) CHERRY USB Wireless Device System Control: Applying InputClass "libinput keyboard catchall"
[    16.869] (II) Using input driver 'libinput' for 'CHERRY USB Wireless Device System Control'
[    16.869] (**) CHERRY USB Wireless Device System Control: always reports core events
[    16.869] (**) Option "Device" "/dev/input/event4"
[    16.869] (**) Option "_source" "server/udev"
[    16.870] (II) event4  - CHERRY USB Wireless Device System Control: is tagged by udev as: Keyboard
[    16.870] (II) event4  - CHERRY USB Wireless Device System Control: device is a keyboard
[    16.870] (II) event4  - CHERRY USB Wireless Device System Control: device removed
[    16.894] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046A:B102.0005/input/input9/event4"
[    16.894] (II) XINPUT: Adding extended input device "CHERRY USB Wireless Device System Control" (type: KEYBOARD, id 12)
[    16.894] (**) Option "xkb_model" "pc105"
[    16.894] (**) Option "xkb_layout" "fr"
[    16.894] (**) Option "xkb_variant" "latin9"
[    16.895] (II) event4  - CHERRY USB Wireless Device System Control: is tagged by udev as: Keyboard
[    16.895] (II) event4  - CHERRY USB Wireless Device System Control: device is a keyboard
[    16.896] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
[    16.896] (II) No input driver specified, ignoring this device.
[    16.896] (II) This device may have been added with another device file.
[    16.896] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[    16.896] (II) No input driver specified, ignoring this device.
[    16.896] (II) This device may have been added with another device file.
[    16.897] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[    16.897] (II) No input driver specified, ignoring this device.
[    16.897] (II) This device may have been added with another device file.
[    16.897] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event11)
[    16.897] (II) No input driver specified, ignoring this device.
[    16.897] (II) This device may have been added with another device file.
[    16.897] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event12)
[    16.897] (II) No input driver specified, ignoring this device.
[    16.897] (II) This device may have been added with another device file.
[    16.898] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[    16.898] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    16.898] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[    16.898] (**) Eee PC WMI hotkeys: always reports core events
[    16.898] (**) Option "Device" "/dev/input/event7"
[    16.898] (**) Option "_source" "server/udev"
[    16.898] (II) event7  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[    16.898] (II) event7  - Eee PC WMI hotkeys: device is a keyboard
[    16.898] (II) event7  - Eee PC WMI hotkeys: device removed
[    16.922] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input23/event7"
[    16.922] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 13)
[    16.922] (**) Option "xkb_model" "pc105"
[    16.922] (**) Option "xkb_layout" "fr"
[    16.922] (**) Option "xkb_variant" "latin9"
[    16.923] (II) event7  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[    16.923] (II) event7  - Eee PC WMI hotkeys: device is a keyboard
[    16.929] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[    16.929] (II) Using input driver 'libinput' for 'Logitech K270'
[    16.929] (**) Logitech K270: always reports core events
[    16.929] (**) Option "Device" "/dev/input/event6"
[    16.929] (**) Option "_source" "_driver/libinput"
[    16.929] (II) libinput: Logitech K270: is a virtual subdevice
[    16.929] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:4003.0007/input/input22/event6"
[    16.929] (II) XINPUT: Adding extended input device "Logitech K270" (type: KEYBOARD, id 14)
[    16.929] (**) Option "xkb_model" "pc105"
[    16.929] (**) Option "xkb_layout" "fr"
[    16.929] (**) Option "xkb_variant" "latin9"
[    16.934] (EE) Failed to open authorization file "/var/run/sddm/{96ff8136-c735-4bbe-98b8-4ddaa2413d05}": No such file or directory
[    18.352] (II) modeset(0): Disabling kernel dirty updates, not required.
[    19.155] (WW) EDID timing clock 148.50 exceeds claimed max 5MHz, fixing
[    19.155] (II) Quirked EDID physical size to 0x0 cm
[    19.155] (II) modeset(0): EDID vendor "SAM", prod id 1614
[    19.155] (II) modeset(0): Using hsync ranges from config file
[    19.155] (II) modeset(0): Using vrefresh ranges from config file
[    19.155] (II) modeset(0): Printing DDC gathered Modelines:
[    19.155] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    19.155] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    19.155] (II) modeset(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    19.155] (II) modeset(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    19.155] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    19.155] (II) modeset(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    19.155] (II) modeset(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    19.155] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    19.155] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    19.155] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    19.155] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    19.155] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    19.155] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    19.155] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    19.155] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    19.155] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    19.155] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    19.155] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    19.155] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    19.155] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    19.155] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    19.155] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    19.155] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    19.155] (II) modeset(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    19.155] (II) modeset(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    19.155] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    19.155] (II) modeset(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    19.155] (II) modeset(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    19.155] (II) modeset(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    19.155] (II) modeset(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    20.052] (WW) EDID timing clock 148.50 exceeds claimed max 5MHz, fixing
[    20.053] (II) Quirked EDID physical size to 0x0 cm
[    20.053] (II) modeset(0): EDID vendor "SAM", prod id 1614
[    20.053] (II) modeset(0): Using hsync ranges from config file
[    20.053] (II) modeset(0): Using vrefresh ranges from config file
[    20.053] (II) modeset(0): Printing DDC gathered Modelines:
[    20.053] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    20.053] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    20.053] (II) modeset(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    20.053] (II) modeset(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    20.053] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    20.053] (II) modeset(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    20.053] (II) modeset(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    20.053] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    20.053] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    20.053] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    20.053] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    20.053] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    20.053] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    20.053] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    20.053] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    20.053] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    20.053] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    20.053] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    20.053] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    20.053] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    20.053] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    20.053] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    20.053] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    20.053] (II) modeset(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    20.053] (II) modeset(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    20.053] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    20.053] (II) modeset(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    20.053] (II) modeset(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    20.053] (II) modeset(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    20.053] (II) modeset(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    54.576] (II) config/udev: Adding input device Logitech Wireless Mouse M560 (/dev/input/mouse1)
[    54.576] (II) No input driver specified, ignoring this device.
[    54.576] (II) This device may have been added with another device file.
[    54.613] (II) config/udev: Adding input device Logitech Wireless Mouse M560 (/dev/input/event19)
[    54.613] (**) Logitech Wireless Mouse M560: Applying InputClass "libinput pointer catchall"
[    54.613] (II) Using input driver 'libinput' for 'Logitech Wireless Mouse M560'
[    54.613] (**) Logitech Wireless Mouse M560: always reports core events
[    54.613] (**) Option "Device" "/dev/input/event19"
[    54.613] (**) Option "_source" "server/udev"
[    54.615] (II) event19 - Logitech Wireless Mouse M560: is tagged by udev as: Mouse
[    54.615] (II) event19 - Logitech Wireless Mouse M560: device is a pointer
[    54.616] (II) event19 - Logitech Wireless Mouse M560: device removed
[    54.650] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:402D.0006/input/input35/event19"
[    54.650] (II) XINPUT: Adding extended input device "Logitech Wireless Mouse M560" (type: MOUSE, id 15)
[    54.651] (**) Option "AccelerationScheme" "none"
[    54.653] (**) Logitech Wireless Mouse M560: (accel) selected scheme none/0
[    54.653] (**) Logitech Wireless Mouse M560: (accel) acceleration factor: 2.000
[    54.653] (**) Logitech Wireless Mouse M560: (accel) acceleration threshold: 4
[    54.656] (II) event19 - Logitech Wireless Mouse M560: is tagged by udev as: Mouse
[    54.656] (II) event19 - Logitech Wireless Mouse M560: device is a pointer

Je me pose la question: le problème peut-il venir d'une question de driver, ou bien le driver "Nouveau" est tout à fait apte à gérer l'accélération 3D aussi bien que le propriétaire?
Et si ça ne vient pas des drivers... d'où ça peut venir? J'ai quand même le sentiment d'avoir une CG bridée et c'est un peu frustrant.

PS: petit test effectué pendant que le jeu tourne... le CPU Intel tourne autour de 50%, donc j'en ai conclus que ça ne pouvait pas venir d'un proc trop faible...

Merci de vos suggestions, car là, je cale, malgré les nombreux fils de discussion que j'ai pu lire à droite et à gauche!

Edit après résolution: le souci venait de KDE... En passant à Gnome, tout devient normal (pas testé avec d'autres environnements).

Dernière modification par jerm (Le 20/03/2021, à 12:43)

xubu1957 · Le 13/03/2021, à 11:33

Bonjour,

Montre, en te servant du Retour utilisable de commande :

lspci -vnn | grep -A12 '\''[030[02]\]' | grep -Ei "vga|3d|display|kernel"

ubuntu-drivers devices

uname -a

et :

dpkg -l | grep nvidia

dpkg -l | grep -v ^ii

jerm · Le 13/03/2021, à 11:46

Merci!
Voici les différents résultats:

lscpi:

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GP107 [GeForce GTX 1050 Ti] [10de:1c82] (rev a1) (prog-if 00 [VGA controller])
        Kernel driver in use: nouveau
        Kernel modules: nvidiafb, nouveau

ubuntu-drivers:

== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
modalias : pci:v000010DEd00001C82sv000019DAsd00002454bc03sc00i00
vendor   : NVIDIA Corporation
model    : GP107 [GeForce GTX 1050 Ti]
driver   : nvidia-driver-460-server - distro non-free
driver   : nvidia-driver-390 - distro non-free
driver   : nvidia-driver-450-server - distro non-free
driver   : nvidia-driver-460 - third-party non-free recommended
driver   : nvidia-driver-450 - third-party non-free
driver   : nvidia-driver-418-server - distro non-free
driver   : xserver-xorg-video-nouveau - distro free builtin

uname:

Linux 5.4.0-66-generic #74-Ubuntu SMP Wed Jan 27 22:54:38 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux

dpkg 1:

rc  libnvidia-compute-390:amd64                   390.141-0ubuntu0.20.04.1                    amd64        NVIDIA libcompute package
rc  libnvidia-compute-390:i386                    390.141-0ubuntu0.20.04.1                    i386         NVIDIA libcompute package
rc  libnvidia-compute-435:amd64                   435.21-0ubuntu7                             amd64        NVIDIA libcompute package
rc  libnvidia-compute-440:amd64                   450.66-0ubuntu0.20.04.1                     amd64        Transitional package for libnvidia-compute-450
rc  libnvidia-compute-450:amd64                   450.102.04-0ubuntu0.20.04.1                 amd64        NVIDIA libcompute package
ii  libnvidia-compute-460:amd64                   460.56-0ubuntu0.20.04.1                     amd64        NVIDIA libcompute package
rc  linux-modules-nvidia-440-5.4.0-33-generic     5.4.0-33.37                                 amd64        Linux kernel nvidia modules for version 5.4.0-33

dpkg2:

Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                           Version                                     Architecture Description
+++-=============================================-===========================================-============-======================================================================================================
rc  libgl1-mesa-dri:i386                          20.2.6-0ubuntu0.20.04.1                     i386         free implementation of the OpenGL API -- DRI modules
rc  libnvidia-compute-390:amd64                   390.141-0ubuntu0.20.04.1                    amd64        NVIDIA libcompute package
rc  libnvidia-compute-390:i386                    390.141-0ubuntu0.20.04.1                    i386         NVIDIA libcompute package
rc  libnvidia-compute-435:amd64                   435.21-0ubuntu7                             amd64        NVIDIA libcompute package
rc  libnvidia-compute-440:amd64                   450.66-0ubuntu0.20.04.1                     amd64        Transitional package for libnvidia-compute-450
rc  libnvidia-compute-450:amd64                   450.102.04-0ubuntu0.20.04.1                 amd64        NVIDIA libcompute package
rc  libxvmc1:amd64                                2:1.0.12-2                                  amd64        X11 Video extension library
rc  linux-image-5.4.0-26-generic                  5.4.0-26.30                                 amd64        Signed kernel image generic
rc  linux-image-5.4.0-33-generic                  5.4.0-33.37                                 amd64        Signed kernel image generic
rc  linux-image-5.4.0-37-generic                  5.4.0-37.41                                 amd64        Signed kernel image generic
rc  linux-image-5.4.0-39-generic                  5.4.0-39.43                                 amd64        Signed kernel image generic
rc  linux-image-5.4.0-47-generic                  5.4.0-47.51                                 amd64        Signed kernel image generic
rc  linux-image-5.4.0-48-generic                  5.4.0-48.52                                 amd64        Signed kernel image generic
rc  linux-image-5.4.0-51-generic                  5.4.0-51.56                                 amd64        Signed kernel image generic
rc  linux-image-5.4.0-56-generic                  5.4.0-56.62                                 amd64        Signed kernel image generic
rc  linux-image-5.4.0-58-generic                  5.4.0-58.64                                 amd64        Signed kernel image generic
rc  linux-image-5.4.0-59-generic                  5.4.0-59.65                                 amd64        Signed kernel image generic
rc  linux-image-5.4.0-62-generic                  5.4.0-62.70                                 amd64        Signed kernel image generic
rc  linux-modules-5.4.0-26-generic                5.4.0-26.30                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-33-generic                5.4.0-33.37                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-37-generic                5.4.0-37.41                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-39-generic                5.4.0-39.43                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-47-generic                5.4.0-47.51                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-48-generic                5.4.0-48.52                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-51-generic                5.4.0-51.56                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-56-generic                5.4.0-56.62                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-58-generic                5.4.0-58.64                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-59-generic                5.4.0-59.65                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-62-generic                5.4.0-62.70                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-26-generic          5.4.0-26.30                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-33-generic          5.4.0-33.37                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-37-generic          5.4.0-37.41                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-39-generic          5.4.0-39.43                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-47-generic          5.4.0-47.51                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-48-generic          5.4.0-48.52                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-51-generic          5.4.0-51.56                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-56-generic          5.4.0-56.62                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-58-generic          5.4.0-58.64                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-59-generic          5.4.0-59.65                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-62-generic          5.4.0-62.70                                 amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-nvidia-440-5.4.0-33-generic     5.4.0-33.37                                 amd64        Linux kernel nvidia modules for version 5.4.0-33
rc  pkg-config                                    0.29.1-0ubuntu4                             amd64        manage compile and link flags for libraries
rc  xserver-xorg-video-intel                      2:2.99.917+git20200226-1                    amd64        X.Org X server -- Intel i8xx, i9xx display driver

xubu1957 · Le 13/03/2021, à 12:14

Pour nettoyer :

Le 11/02/2017, moko138 a écrit :

Pour supprimer tous ces fichiers de configuration devenus sans objets et marqués "rc", et uniquement ces fichiers, exécute :
dpkg -l | awk '/^rc/{print $2}' | xargs -r sudo dpkg -P

Pour la question de fond, il faut les conseils des connaisseurs.

Karpon · Le 13/03/2021, à 13:58

Bonjour,

Mon commentaire n'est peut-être pas utile, mais je signale quand même que suite à des problèmes récurrents de plantages, j'ai suspecté la driver graphique.
Le propriétaire Nvdia, (testé - recommandé) m'a semblé suspect, j'ai donc opté pour celui de la distribution, et je ne m'en trouve pas plus mal : l'affichage est tout aussi correct, la souris va plus vite, le chargement est plus rapide, les applications utilisées s'affichent correctement, et depuis, je n'ai pas eu de plantages.
Les conversations sur ce forum laissent d'ailleurs penser que Nvdia ne se préoccupe que de moins en moins des linuxiens...
En résumé, le driver fourni avec la 20.4 semble donner satisfaction.

Dernière modification par Karpon (Le 13/03/2021, à 13:59)

jerm · Le 13/03/2021, à 18:50

Bonjour Karpon,

En fait, j'utilise le driver "Nouveau" parce que justement celui Nvidia ne semble pas fonctionner... Mes ralentissements (uniquement quand il y a des jeux qui tournent), je les ai donc avec le driver "Nouveau".

Merci!

Karpon · Le 13/03/2021, à 20:34

Désolé !
Mais là, je suis trop juste pour aider...

jerm · Le 13/03/2021, à 21:34

xubu1957 a écrit :

Pour nettoyer :
Le 11/02/2017, moko138 a écrit :
Pour supprimer tous ces fichiers de configuration devenus sans objets et marqués "rc", et uniquement ces fichiers, exécute :
dpkg -l | awk '/^rc/{print $2}' | xargs -r sudo dpkg -P
Pour la question de fond, il faut les conseils des connaisseurs.

Voici les retours dpkg une fois nettoyé:

dpkg 1:

ii  libnvidia-compute-460:amd64                   460.56-0ubuntu0.20.04.1                     amd64        NVIDIA libcompute package

dpkg 2:

Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                           Version                                     Architecture Description
+++-=============================================-===========================================-============-======================================================================================================

xubu1957 · Le 13/03/2021, à 21:53

Pour la carte graphique, il y avait eu cette discussion > ubunut 20.04 et nvidia gtx 1050ti

Il faut attendre l'avis des connaisseurs.

jerm · Le 13/03/2021, à 21:59

Pour info, petit test Benchmark que je viens de faire avec glxgears avec

env vblank_mode=0 glxgears

:

ATTENTION: default value of option vblank_mode overridden by environment.
21044 frames in 5.0 seconds = 4197.631 FPS
22985 frames in 5.0 seconds = 4596.882 FPS
23247 frames in 5.0 seconds = 4649.371 FPS
23302 frames in 5.0 seconds = 4660.368 FPS
22861 frames in 5.0 seconds = 4571.986 FPS

Si j'en crois la page dédiée à glxgears, ma GTX 1050 Ti devrait autour de 126726 frames et 25345.195 FPS... Soit plus de 5 fois plus que mes résultats...
Ça n'indique sûrement pas d'où peut venir le problème, mais ça confirme qu'elle ne tourne pas à son meilleur niveau!

jerm · Le 13/03/2021, à 22:04

xubu1957 a écrit :

Pour la carte graphique, il y avait eu cette discussion > ubunut 20.04 et nvidia gtx 1050ti
Il faut attendre l'avis des connaisseurs.

Merci! En effet, j'étais passé à côté... Il semblerait que le problème soit à peu près le même! Et malheureusement, le manque de solution aussi!

Nuliel · Le 13/03/2021, à 23:59

Hello,
Tu peux aller dans le BIOS vérifier que le secure boot est désactivé, et s'il était activé auparavant, réinstaller le pilote nvidia le plus récent et voir ce que ça donne.
Sinon tu vas pas faire grand chose avec libnvidia-compute-460:amd64, il faut installer le pilote en entier.

Dernière modification par Nuliel (Le 14/03/2021, à 00:18)

jerm · Le 14/03/2021, à 15:26

Bonjour Nuliel!

Tout d'abord, merci!
Mais pour être sûr et ne pas faire n'importe quoi:
- Ce matin, j'ai refait une installation complète... Parce que j'ai eu problème avec Grub et qu'en même temps, ça ne fait pas de mal, de temps en temps!
- J'en ai profité pour ne pas cocher "Installer les drivers propriétaires"
- Le test Benchmark est toujours pareil

Le Secure Boot est bien activé dans le BIOS. Dois-je donc le désactiver, redémarrer mon système ainsi, puis installer le driver 460?
Merci!

Nuliel · Le 14/03/2021, à 18:15

Le Secure Boot est bien activé dans le BIOS. Dois-je donc le désactiver, redémarrer mon système ainsi, puis installer le driver 460?

Oui

Au passage le secure boot peut aussi poser problème avec grub.

jerm · Le 14/03/2021, à 21:38

Bonsoir,

Je viens d'essayer: désactiver le Secure Boot dans le BIOS, puis installer nvidia-460. Au redémarrage, toujours le même souci de basse résolution.
J'ai peut-être raté un truc... Que voulais-tu dire exactement par

Nuliel a écrit :

Sinon tu vas pas faire grand chose avec libnvidia-compute-460:amd64, il faut installer le pilote en entier.

Devrais-je installer libnvidia-compute-460:amd64 après l'installation du driver dans le gestionnaire de KDE?

Nuliel · Le 14/03/2021, à 22:29

Je voulais dire que l'installation du paquet libnvidia-compute-460:amd64 n'est pas suffisant pour gérer ta carte graphique.
Avec les pilotes propriétaires installés (afin d'avoir des erreurs dans les logs) puis après un redémarrage (afin de limiter la quantité d'infos), peux tu donner le retour de la commande

dmesg

ainsi que

bootctl

et le contenu de Xorg.0.log

Dernière modification par Nuliel (Le 14/03/2021, à 22:29)

jerm · Le 14/03/2021, à 23:00

Bonsoir!

Voici les retours, pendant que je suis en basse résolution, avec les drivers propriétaires installés:

dmesg

[    0.000000] microcode: microcode updated early to revision 0x21, date = 2019-02-13
[    0.000000] Linux version 5.8.0-44-generic (buildd@lgw01-amd64-054) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #50~20.04.1-Ubuntu SMP Wed Feb 10 21:07:30 UTC 2021 (Ubuntu 5.8.0-44.50~20.04.1-generic 5.8.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-44-generic root=UUID=856b3dc0-e042-4095-9fdd-0893bec759d6 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd34ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dd350000-0x00000000dd64ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dd650000-0x00000000dd65ffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dd660000-0x00000000dd77efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dd77f000-0x00000000de7d8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000de7d9000-0x00000000de7d9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000de7da000-0x00000000de81cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000de81d000-0x00000000dec50fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dec51000-0x00000000deff3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000039effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x95e78018-0x95e97857] usable ==> usable
[    0.000000] e820: update [mem 0x95e78018-0x95e97857] usable ==> usable
[    0.000000] e820: update [mem 0x95e6a018-0x95e77057] usable ==> usable
[    0.000000] e820: update [mem 0x95e6a018-0x95e77057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000095e6a017] usable
[    0.000000] reserve setup_data: [mem 0x0000000095e6a018-0x0000000095e77057] usable
[    0.000000] reserve setup_data: [mem 0x0000000095e77058-0x0000000095e78017] usable
[    0.000000] reserve setup_data: [mem 0x0000000095e78018-0x0000000095e97857] usable
[    0.000000] reserve setup_data: [mem 0x0000000095e97858-0x00000000dd34ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000dd350000-0x00000000dd64ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000dd650000-0x00000000dd65ffff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000dd660000-0x00000000dd77efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000dd77f000-0x00000000de7d8fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000de7d9000-0x00000000de7d9fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000de7da000-0x00000000de81cfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000de81d000-0x00000000dec50fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000dec51000-0x00000000deff3fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000deff4000-0x00000000deffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000039effffff] usable
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi: ACPI=0xdd653000 ACPI 2.0=0xdd653000 SMBIOS=0xf04c0 
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: System manufacturer System Product Name/B75M-PLUS, BIOS 1001 07/07/2014
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3192.777 MHz processor
[    0.000714] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000715] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000721] last_pfn = 0x39f000 max_arch_pfn = 0x400000000
[    0.000724] MTRR default type: uncachable
[    0.000725] MTRR fixed ranges enabled:
[    0.000726]   00000-9FFFF write-back
[    0.000726]   A0000-BFFFF uncachable
[    0.000727]   C0000-CFFFF write-protect
[    0.000728]   D0000-DFFFF uncachable
[    0.000728]   E0000-FFFFF write-protect
[    0.000729] MTRR variable ranges enabled:
[    0.000730]   0 base 000000000 mask E00000000 write-back
[    0.000730]   1 base 200000000 mask F00000000 write-back
[    0.000731]   2 base 300000000 mask F80000000 write-back
[    0.000732]   3 base 380000000 mask FF0000000 write-back
[    0.000732]   4 base 390000000 mask FF8000000 write-back
[    0.000733]   5 base 398000000 mask FFC000000 write-back
[    0.000734]   6 base 39C000000 mask FFE000000 write-back
[    0.000734]   7 base 39E000000 mask FFF000000 write-back
[    0.000735]   8 base 0E0000000 mask FE0000000 uncachable
[    0.000735]   9 disabled
[    0.000987] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001096] total RAM covered: 14320M
[    0.001381] Found optimal setting for mtrr clean up
[    0.001381]  gran_size: 64K  chunk_size: 2G  num_reg: 7  lose cover RAM: 0G
[    0.001627] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.001629] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.009124] found SMP MP-table at [mem 0x000fd770-0x000fd77f]
[    0.009159] check: Scanning 1 areas for low memory corruption
[    0.009646] secureboot: Secure boot disabled
[    0.009647] RAMDISK: [mem 0x369bd000-0x3d484fff]
[    0.009655] ACPI: Early table checksum verification disabled
[    0.009658] ACPI: RSDP 0x00000000DD653000 000024 (v02 ALASKA)
[    0.009661] ACPI: XSDT 0x00000000DD653080 000074 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.009666] ACPI: FACP 0x00000000DD65DFB8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.009671] ACPI: DSDT 0x00000000DD653188 00AE2A (v02 ALASKA A M I    00000022 INTL 20051117)
[    0.009674] ACPI: FACS 0x00000000DD77D080 000040
[    0.009676] ACPI: APIC 0x00000000DD65E0C8 000062 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.009678] ACPI: FPDT 0x00000000DD65E130 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.009680] ACPI: ASF! 0x00000000DD65E178 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.009683] ACPI: MCFG 0x00000000DD65E220 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.009685] ACPI: HPET 0x00000000DD65E260 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.009687] ACPI: SSDT 0x00000000DD65E298 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.009689] ACPI: BGRT 0x00000000DD65FAA8 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.009692] ACPI: SSDT 0x00000000DD65E660 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.009694] ACPI: SSDT 0x00000000DD65F010 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.009702] ACPI: Local APIC address 0xfee00000
[    0.009775] No NUMA configuration found
[    0.009775] Faking a node at [mem 0x0000000000000000-0x000000039effffff]
[    0.009785] NODE_DATA(0) allocated [mem 0x39efcb000-0x39eff4fff]
[    0.010124] Zone ranges:
[    0.010124]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.010125]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.010126]   Normal   [mem 0x0000000100000000-0x000000039effffff]
[    0.010127]   Device   empty
[    0.010127] Movable zone start for each node
[    0.010130] Early memory node ranges
[    0.010131]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.010132]   node   0: [mem 0x0000000000100000-0x00000000dd34ffff]
[    0.010132]   node   0: [mem 0x00000000de7d9000-0x00000000de7d9fff]
[    0.010133]   node   0: [mem 0x00000000de81d000-0x00000000dec50fff]
[    0.010133]   node   0: [mem 0x00000000deff4000-0x00000000deffffff]
[    0.010134]   node   0: [mem 0x0000000100000000-0x000000039effffff]
[    0.010256] Zeroed struct page in unavailable ranges: 14545 pages
[    0.010256] Initmem setup node 0 [mem 0x0000000000001000-0x000000039effffff]
[    0.010257] On node 0 totalpages: 3655471
[    0.010258]   DMA zone: 64 pages used for memmap
[    0.010259]   DMA zone: 25 pages reserved
[    0.010259]   DMA zone: 3998 pages, LIFO batch:0
[    0.010283]   DMA32 zone: 14111 pages used for memmap
[    0.010284]   DMA32 zone: 903057 pages, LIFO batch:63
[    0.017018]   Normal zone: 42944 pages used for memmap
[    0.017020]   Normal zone: 2748416 pages, LIFO batch:63
[    0.037743] ACPI: PM-Timer IO Port: 0x408
[    0.037746] ACPI: Local APIC address 0xfee00000
[    0.037753] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.037765] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.037767] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.037768] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.037769] ACPI: IRQ0 used by override.
[    0.037770] ACPI: IRQ9 used by override.
[    0.037771] Using ACPI (MADT) for SMP configuration information
[    0.037772] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.037777] efi_bgrt: Ignoring BGRT: invalid image address
[    0.037779] TSC deadline timer available
[    0.037781] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.037802] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.037804] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.037804] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.037805] PM: hibernation: Registered nosave memory: [mem 0x95e6a000-0x95e6afff]
[    0.037807] PM: hibernation: Registered nosave memory: [mem 0x95e77000-0x95e77fff]
[    0.037807] PM: hibernation: Registered nosave memory: [mem 0x95e78000-0x95e78fff]
[    0.037809] PM: hibernation: Registered nosave memory: [mem 0x95e97000-0x95e97fff]
[    0.037810] PM: hibernation: Registered nosave memory: [mem 0xdd350000-0xdd64ffff]
[    0.037811] PM: hibernation: Registered nosave memory: [mem 0xdd650000-0xdd65ffff]
[    0.037811] PM: hibernation: Registered nosave memory: [mem 0xdd660000-0xdd77efff]
[    0.037811] PM: hibernation: Registered nosave memory: [mem 0xdd77f000-0xde7d8fff]
[    0.037813] PM: hibernation: Registered nosave memory: [mem 0xde7da000-0xde81cfff]
[    0.037814] PM: hibernation: Registered nosave memory: [mem 0xdec51000-0xdeff3fff]
[    0.037816] PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[    0.037816] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.037817] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.037817] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.037818] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.037818] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.037818] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.037819] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.037819] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.037820] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.037820] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.037821] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.037822] [mem 0xdf000000-0xf7ffffff] available for PCI devices
[    0.037823] Booting paravirtualized kernel on bare hardware
[    0.037826] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.037833] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.037992] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u1048576
[    0.037998] pcpu-alloc: s192512 r8192 d28672 u1048576 alloc=1*2097152
[    0.037999] pcpu-alloc: [0] 0 1 
[    0.038025] Built 1 zonelists, mobility grouping on.  Total pages: 3598327
[    0.038026] Policy zone: Normal
[    0.038027] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-44-generic root=UUID=856b3dc0-e042-4095-9fdd-0893bec759d6 ro quiet splash vt.handoff=7
[    0.038907] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.039313] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.039342] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.080026] Memory: 13947304K/14621884K available (14339K kernel code, 2537K rwdata, 5388K rodata, 2640K init, 4920K bss, 674580K reserved, 0K cma-reserved)
[    0.080032] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[    0.080132] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.080142] Kernel/User page tables isolation: enabled
[    0.080156] ftrace: allocating 46218 entries in 181 pages
[    0.094250] ftrace: allocated 181 pages with 5 groups
[    0.094349] rcu: Hierarchical RCU implementation.
[    0.094350] rcu:     RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.094351]  Trampoline variant of Tasks RCU enabled.
[    0.094351]  Rude variant of Tasks RCU enabled.
[    0.094351]  Tracing variant of Tasks RCU enabled.
[    0.094352] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.094352] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.097387] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[    0.097615] vt handoff: transparent VT on vt#7
[    0.097621] Console: colour dummy device 80x25
[    0.097626] printk: console [tty0] enabled
[    0.097641] ACPI: Core revision 20200528
[    0.097729] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.097741] APIC: Switch to symmetric I/O mode setup
[    0.098126] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.117740] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e05a2ba2b8, max_idle_ns: 440795288737 ns
[    0.117744] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.55 BogoMIPS (lpj=12771108)
[    0.117746] pid_max: default: 32768 minimum: 301
[    0.123517] LSM: Security Framework initializing
[    0.123526] Yama: becoming mindful.
[    0.123554] AppArmor: AppArmor initialized
[    0.123610] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.123646] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.123878] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.123885] process: using mwait in idle threads
[    0.123887] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.123888] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.123891] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.123892] Spectre V2 : Mitigation: Full generic retpoline
[    0.123893] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.123893] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.123894] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.123895] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.123897] MDS: Mitigation: Clear CPU buffers
[    0.124074] Freeing SMP alternatives memory: 40K
[    0.125816] smpboot: CPU0: Intel(R) Pentium(R) CPU G2130 @ 3.20GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.125905] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.125911] ... version:                3
[    0.125911] ... bit width:              48
[    0.125911] ... generic registers:      8
[    0.125912] ... value mask:             0000ffffffffffff
[    0.125912] ... max period:             00007fffffffffff
[    0.125913] ... fixed-purpose events:   3
[    0.125913] ... event mask:             00000007000000ff
[    0.125944] rcu: Hierarchical SRCU implementation.
[    0.126572] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.126600] smp: Bringing up secondary CPUs ...
[    0.126685] x86: Booting SMP configuration:
[    0.126686] .... node  #0, CPUs:      #1
[    0.129792] smp: Brought up 1 node, 2 CPUs
[    0.129792] smpboot: Max logical packages: 1
[    0.129792] smpboot: Total of 2 processors activated (12771.10 BogoMIPS)
[    0.130552] devtmpfs: initialized
[    0.130552] x86/mm: Memory block size: 128MB
[    0.130679] PM: Registering ACPI NVS region [mem 0xdd660000-0xdd77efff] (1175552 bytes)
[    0.130691] PM: Registering ACPI NVS region [mem 0xde7da000-0xde81cfff] (274432 bytes)
[    0.130750] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.130750] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.130750] pinctrl core: initialized pinctrl subsystem
[    0.130750] PM: RTC time: 20:46:01, date: 2021-03-14
[    0.130750] thermal_sys: Registered thermal governor 'fair_share'
[    0.130750] thermal_sys: Registered thermal governor 'bang_bang'
[    0.130750] thermal_sys: Registered thermal governor 'step_wise'
[    0.130750] thermal_sys: Registered thermal governor 'user_space'
[    0.130750] thermal_sys: Registered thermal governor 'power_allocator'
[    0.130750] NET: Registered protocol family 16
[    0.130750] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.130750] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.130750] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.130750] audit: initializing netlink subsys (disabled)
[    0.130750] audit: type=2000 audit(1615754761.032:1): state=initialized audit_enabled=0 res=1
[    0.130750] EISA bus registered
[    0.130750] cpuidle: using governor ladder
[    0.130750] cpuidle: using governor menu
[    0.130750] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.130750] ACPI: bus type PCI registered
[    0.130750] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.130750] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.130750] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.130750] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.130750] PCI: Using configuration type 1 for base access
[    0.130750] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.130750] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.134142] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.134142] ACPI: Added _OSI(Module Device)
[    0.134142] ACPI: Added _OSI(Processor Device)
[    0.134142] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.134142] ACPI: Added _OSI(Processor Aggregator Device)
[    0.134142] ACPI: Added _OSI(Linux-Dell-Video)
[    0.134142] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.134142] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.141728] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.143217] ACPI: Dynamic OEM Table Load:
[    0.143222] ACPI: SSDT 0xFFFF9A754F2F4000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.144020] ACPI: Dynamic OEM Table Load:
[    0.144023] ACPI: SSDT 0xFFFF9A754E405400 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.144627] ACPI: Dynamic OEM Table Load:
[    0.144629] ACPI: SSDT 0xFFFF9A754E911800 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.145700] ACPI: Interpreter enabled
[    0.145718] ACPI: (supports S0 S3 S4 S5)
[    0.145719] ACPI: Using IOAPIC for interrupt routing
[    0.145747] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.146089] ACPI: Enabled 10 GPEs in block 00 to 3F
[    0.153327] ACPI: Power Resource [FN00] (off)
[    0.153405] ACPI: Power Resource [FN01] (off)
[    0.153479] ACPI: Power Resource [FN02] (off)
[    0.153555] ACPI: Power Resource [FN03] (off)
[    0.153628] ACPI: Power Resource [FN04] (off)
[    0.154303] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.154308] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.154605] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.154795] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[    0.154795] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.155321] PCI host bridge to bus 0000:00
[    0.155322] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.155323] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.155324] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.155325] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.155326] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.155327] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.155328] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.155328] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.155329] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.155337] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[    0.155420] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.155453] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.155555] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.155577] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]
[    0.155642] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.155724] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.155747] pci 0000:00:16.0: reg 0x10: [mem 0xf721b000-0xf721b00f 64bit]
[    0.155817] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.155895] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.155915] pci 0000:00:1a.0: reg 0x10: [mem 0xf7218000-0xf72183ff]
[    0.155993] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.156077] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.156094] pci 0000:00:1b.0: reg 0x10: [mem 0xf7210000-0xf7213fff 64bit]
[    0.156157] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.156245] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.156403] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.156514] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[    0.156602] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.156693] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.156713] pci 0000:00:1d.0: reg 0x10: [mem 0xf7217000-0xf72173ff]
[    0.156791] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.156868] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.156994] pci 0000:00:1f.0: [8086:1e49] type 00 class 0x060100
[    0.157167] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[    0.157182] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.157188] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.157194] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.157200] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.157206] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.157213] pci 0000:00:1f.2: reg 0x24: [mem 0xf7216000-0xf72167ff]
[    0.157249] pci 0000:00:1f.2: PME# supported from D3hot
[    0.157323] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.157339] pci 0000:00:1f.3: reg 0x10: [mem 0xf7215000-0xf72150ff 64bit]
[    0.157357] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.157475] pci 0000:01:00.0: [10de:1c82] type 00 class 0x030000
[    0.157491] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.157499] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.157508] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.157513] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.157519] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.157523] pci 0000:01:00.0: enabling Extended Tags
[    0.157534] pci 0000:01:00.0: BAR 3: assigned to efifb
[    0.157596] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.157629] pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300
[    0.157640] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.157665] pci 0000:01:00.1: enabling Extended Tags
[    0.157754] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.157755] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.157757] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.157759] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.157822] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.157895] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.157930] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.157962] pci 0000:03:00.0: reg 0x18: [mem 0xf7100000-0xf7100fff 64bit]
[    0.157982] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    0.158114] pci 0000:03:00.0: supports D1 D2
[    0.158114] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.158265] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.158268] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.158271] pci 0000:00:1c.4:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.158275] pci 0000:00:1c.4:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.158293] pci_bus 0000:04: extended config space not accessible
[    0.158336] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.158344] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.158345] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.158346] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.158347] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.158347] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.158348] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.158349] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.158350] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[    0.158974] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.159037] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.159099] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 *14 15)
[    0.159161] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.159222] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.159283] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15)
[    0.159344] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.159405] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 10 11 12 14 15)
[    0.159732] iommu: Default domain type: Translated 
[    0.159732] SCSI subsystem initialized
[    0.159732] libata version 3.00 loaded.
[    0.159732] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.159732] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.159732] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.159732] vgaarb: loaded
[    0.159732] ACPI: bus type USB registered
[    0.159732] usbcore: registered new interface driver usbfs
[    0.159732] usbcore: registered new interface driver hub
[    0.159732] usbcore: registered new device driver usb
[    0.159732] pps_core: LinuxPPS API ver. 1 registered
[    0.159732] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.159732] PTP clock support registered
[    0.159732] EDAC MC: Ver: 3.0.0
[    0.159732] Registered efivars operations
[    0.159732] NetLabel: Initializing
[    0.159732] NetLabel:  domain hash size = 128
[    0.159732] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.159732] NetLabel:  unlabeled traffic allowed by default
[    0.159732] PCI: Using ACPI for IRQ routing
[    0.161779] PCI: pci_cache_line_size set to 64 bytes
[    0.161816] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.161817] e820: reserve RAM buffer [mem 0x95e6a018-0x97ffffff]
[    0.161818] e820: reserve RAM buffer [mem 0x95e78018-0x97ffffff]
[    0.161819] e820: reserve RAM buffer [mem 0xdd350000-0xdfffffff]
[    0.161820] e820: reserve RAM buffer [mem 0xde7da000-0xdfffffff]
[    0.161820] e820: reserve RAM buffer [mem 0xdec51000-0xdfffffff]
[    0.161821] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.161822] e820: reserve RAM buffer [mem 0x39f000000-0x39fffffff]
[    0.162301] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.162305] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.164326] clocksource: Switched to clocksource tsc-early
[    0.173871] VFS: Disk quotas dquot_6.6.0
[    0.173884] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.173978] AppArmor: AppArmor Filesystem Enabled
[    0.174005] pnp: PnP ACPI init
[    0.174136] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.174141] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.174228] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.174231] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.174232] system 00:01: [io  0xffff] has been reserved
[    0.174233] system 00:01: [io  0xffff] has been reserved
[    0.174234] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.174235] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.174236] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.174237] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.174240] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.174263] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.174312] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.174315] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.174413] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.174416] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.174707] pnp 00:05: [dma 0 disabled]
[    0.174803] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.174853] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.174857] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.175097] pnp 00:07: [dma 0 disabled]
[    0.175133] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.175352] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.175353] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.175354] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.175355] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.175357] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.175358] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.175359] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.175360] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.175361] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.175362] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.175363] system 00:08: [mem 0xf2200000-0xf2200fff] has been reserved
[    0.175366] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.175509] pnp: PnP ACPI: found 9 devices
[    0.181031] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.181082] NET: Registered protocol family 2
[    0.181229] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.181300] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.181484] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.181589] TCP: Hash tables configured (established 131072 bind 65536)
[    0.181679] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.181715] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.181785] NET: Registered protocol family 1
[    0.181788] NET: Registered protocol family 44
[    0.181799] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.181802] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.181804] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.181805] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.181808] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.181824] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.181826] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.181830] pci 0000:00:1c.4:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.181833] pci 0000:00:1c.4:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.181837] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.181846] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.181847] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.181848] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.181849] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.181850] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.181851] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.181852] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.181853] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff window]
[    0.181854] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.181855] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.181856] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.181857] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.181857] pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
[    0.181858] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.181859] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.181860] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.181861] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.181862] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.181863] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.181864] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.181865] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.181866] pci_bus 0000:04: resource 11 [mem 0xe0000000-0xfeafffff window]
[    0.205852] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x670 took 23151 usecs
[    0.229847] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x670 took 23420 usecs
[    0.229865] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.229875] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.229882] pci 0000:03:00.0: CLS mismatch (64 != 32), using 64 bytes
[    0.229951] Trying to unpack rootfs image as initramfs...
[    0.425601] Freeing initrd memory: 109344K
[    0.425663] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.425665] software IO TLB: mapped [mem 0xcc15c000-0xd015c000] (64MB)
[    0.425834] check: Scanning for low memory corruption every 60 seconds
[    0.426167] Initialise system trusted keyrings
[    0.426175] Key type blacklist registered
[    0.426200] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.427224] zbud: loaded
[    0.427424] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.427541] fuse: init (API version 7.31)
[    0.427644] integrity: Platform Keyring initialized
[    0.436738] Key type asymmetric registered
[    0.436739] Asymmetric key parser 'x509' registered
[    0.436747] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.436774] io scheduler mq-deadline registered
[    0.437320] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.437361] efifb: probing for efifb
[    0.437375] efifb: No BGRT, not showing boot graphics
[    0.437376] efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
[    0.437376] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.437377] efifb: scrolling: redraw
[    0.437378] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.437409] fbcon: Deferring console take-over
[    0.437410] fb0: EFI VGA frame buffer device
[    0.437417] intel_idle: MWAIT substates: 0x1120
[    0.437417] intel_idle: v0.5.1 model 0x3A
[    0.437489] intel_idle: Local APIC timer is reliable in all C-states
[    0.437585] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.437602] ACPI: Power Button [PWRB]
[    0.437628] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.437652] ACPI: Power Button [PWRF]
[    0.438270] thermal LNXTHERM:00: registered as thermal_zone0
[    0.438270] ACPI: Thermal Zone [TZ00] (28 C)
[    0.438530] thermal LNXTHERM:01: registered as thermal_zone1
[    0.438531] ACPI: Thermal Zone [TZ01] (30 C)
[    0.438668] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.459165] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.460684] Linux agpgart interface v0.103
[    0.462014] loop: module loaded
[    0.462241] libphy: Fixed MDIO Bus: probed
[    0.462242] tun: Universal TUN/TAP device driver, 1.6
[    0.462262] PPP generic driver version 2.4.2
[    0.462299] VFIO - User Level meta-driver version: 0.3
[    0.462353] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.462355] ehci-pci: EHCI PCI platform driver
[    0.462502] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.462506] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.462516] ehci-pci 0000:00:1a.0: debug port 2
[    0.466422] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.466432] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7218000
[    0.481774] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.481838] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[    0.481839] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.481840] usb usb1: Product: EHCI Host Controller
[    0.481841] usb usb1: Manufacturer: Linux 5.8.0-44-generic ehci_hcd
[    0.481842] usb usb1: SerialNumber: 0000:00:1a.0
[    0.482027] hub 1-0:1.0: USB hub found
[    0.482033] hub 1-0:1.0: 2 ports detected
[    0.482238] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.482241] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.482250] ehci-pci 0000:00:1d.0: debug port 2
[    0.486136] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.486139] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7217000
[    0.501774] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.501837] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[    0.501838] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.501839] usb usb2: Product: EHCI Host Controller
[    0.501840] usb usb2: Manufacturer: Linux 5.8.0-44-generic ehci_hcd
[    0.501840] usb usb2: SerialNumber: 0000:00:1d.0
[    0.501992] hub 2-0:1.0: USB hub found
[    0.501998] hub 2-0:1.0: 2 ports detected
[    0.502125] ehci-platform: EHCI generic platform driver
[    0.502133] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.502136] ohci-pci: OHCI PCI platform driver
[    0.502143] ohci-platform: OHCI generic platform driver
[    0.502148] uhci_hcd: USB Universal Host Controller Interface driver
[    0.502179] i8042: PNP: No PS/2 controller found.
[    0.502328] mousedev: PS/2 mouse device common for all mice
[    0.502603] rtc_cmos 00:02: RTC can wake from S4
[    0.502769] rtc_cmos 00:02: registered as rtc0
[    0.502795] rtc_cmos 00:02: setting system clock to 2021-03-14T20:46:01 UTC (1615754761)
[    0.502808] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.502813] i2c /dev entries driver
[    0.502850] device-mapper: uevent: version 1.0.3
[    0.502890] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[    0.502906] platform eisa.0: Probing EISA bus 0
[    0.502908] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.502909] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.502909] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.502910] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.502911] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.502912] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.502912] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.502913] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.502914] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.502915] platform eisa.0: EISA: Detected 0 cards
[    0.502919] intel_pstate: Intel P-state driver initializing
[    0.503020] ledtrig-cpu: registered to indicate activity on CPUs
[    0.503023] EFI Variables Facility v0.08 2004-May-17
[    0.513384] drop_monitor: Initializing network drop monitor service
[    0.513642] NET: Registered protocol family 10
[    0.519935] Segment Routing with IPv6
[    0.519963] NET: Registered protocol family 17
[    0.519999] Key type dns_resolver registered
[    0.520184] microcode: sig=0x306a9, pf=0x2, revision=0x21
[    0.520213] microcode: Microcode Update Driver: v2.2.
[    0.520217] IPI shorthand broadcast: enabled
[    0.520226] sched_clock: Marking stable (520047058, 161643)->(539402121, -19193420)
[    0.520285] registered taskstats version 1
[    0.520297] Loading compiled-in X.509 certificates
[    0.521079] Loaded X.509 cert 'Build time autogenerated kernel key: a3e9eb9032099963d398e4d4d5991ce491952397'
[    0.521103] zswap: loaded using pool lzo/zbud
[    0.521178] Key type ._fscrypt registered
[    0.521179] Key type .fscrypt registered
[    0.521180] Key type fscrypt-provisioning registered
[    0.523681] Key type encrypted registered
[    0.523684] AppArmor: AppArmor sha1 policy hashing enabled
[    0.524538] integrity: Loading X.509 certificate: UEFI:MokListRT
[    0.524563] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
[    0.524564] integrity: Loading X.509 certificate: UEFI:MokListRT
[    0.524807] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.525023] ima: No TPM chip found, activating TPM-bypass!
[    0.525027] ima: Allocated hash algorithm: sha1
[    0.525033] ima: No architecture policies found
[    0.525041] evm: Initialising EVM extended attributes:
[    0.525042] evm: security.selinux
[    0.525042] evm: security.SMACK64
[    0.525043] evm: security.SMACK64EXEC
[    0.525043] evm: security.SMACK64TRANSMUTE
[    0.525043] evm: security.SMACK64MMAP
[    0.525044] evm: security.apparmor
[    0.525044] evm: security.ima
[    0.525044] evm: security.capability
[    0.525045] evm: HMAC attrs: 0x1
[    0.525313] PM:   Magic number: 13:391:801
[    0.525356] acpi PNP0F03:00: hash matches
[    0.525452] RAS: Correctable Errors collector initialized.
[    0.526421] Freeing unused decrypted memory: 2040K
[    0.526763] Freeing unused kernel image (initmem) memory: 2640K
[    0.545839] Write protecting the kernel read-only data: 22528k
[    0.546532] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    0.546782] Freeing unused kernel image (rodata/data gap) memory: 756K
[    0.641050] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.641051] x86/mm: Checking user space page tables
[    0.732222] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.732262] Run /init as init process
[    0.732265]   with arguments:
[    0.732266]     /init
[    0.732267]     splash
[    0.732268]   with environment:
[    0.732268]     HOME=/
[    0.732269]     TERM=linux
[    0.732270]     BOOT_IMAGE=/boot/vmlinuz-5.8.0-44-generic
[    0.817857] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.835784] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.836731] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20200528/utaddress-204)
[    0.836735] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.836737] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200528/utaddress-204)
[    0.836739] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.836740] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200528/utaddress-204)
[    0.836742] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.836743] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200528/utaddress-204)
[    0.836744] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.836745] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    0.836888] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.836893] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.837756] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.837964] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[    0.837968] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.838095] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[    0.838096] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.838097] usb usb3: Product: xHCI Host Controller
[    0.838098] usb usb3: Manufacturer: Linux 5.8.0-44-generic xhci-hcd
[    0.838099] usb usb3: SerialNumber: 0000:00:14.0
[    0.838191] hub 3-0:1.0: USB hub found
[    0.838199] hub 3-0:1.0: 4 ports detected
[    0.838578] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.838580] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.838582] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.838610] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
[    0.838611] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.838612] usb usb4: Product: xHCI Host Controller
[    0.838613] usb usb4: Manufacturer: Linux 5.8.0-44-generic xhci-hcd
[    0.838614] usb usb4: SerialNumber: 0000:00:14.0
[    0.838682] hub 4-0:1.0: USB hub found
[    0.838689] hub 4-0:1.0: 4 ports detected
[    0.841084] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.843723] ahci 0000:00:1f.2: version 3.0
[    0.844083] i2c i2c-0: 4/4 memory slots populated (from DMI)
[    0.844453] i2c i2c-0: Successfully instantiated SPD at 0x50
[    0.844868] i2c i2c-0: Successfully instantiated SPD at 0x51
[    0.845285] i2c i2c-0: Successfully instantiated SPD at 0x52
[    0.845618] i2c i2c-0: Successfully instantiated SPD at 0x53
[    0.857692] cryptd: max_cpu_qlen set to 1000
[    0.858048] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2e impl SATA mode
[    0.858050] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    0.860707] libphy: r8169: probed
[    0.860881] r8169 0000:03:00.0 eth0: RTL8168g/8111g, bc:ee:7b:9d:b4:f8, XID 4c0, IRQ 29
[    0.860883] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    0.898248] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    0.900957] scsi host0: ahci
[    0.906263] scsi host1: ahci
[    0.906419] scsi host2: ahci
[    0.906545] scsi host3: ahci
[    0.906679] scsi host4: ahci
[    0.906802] scsi host5: ahci
[    0.906836] ata1: DUMMY
[    0.906838] ata2: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216180 irq 28
[    0.906840] ata3: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216200 irq 28
[    0.906841] ata4: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216280 irq 28
[    0.906842] ata5: DUMMY
[    0.906843] ata6: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216380 irq 28
[    0.974113] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    0.974115] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.974363] hub 1-1:1.0: USB hub found
[    0.974461] hub 1-1:1.0: 6 ports detected
[    0.994113] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    0.994115] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.994367] hub 2-1:1.0: USB hub found
[    0.994461] hub 2-1:1.0: 6 ports detected
[    1.157761] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[    1.207430] nvidia: loading out-of-tree module taints kernel.
[    1.207438] nvidia: module license 'NVIDIA' taints kernel.
[    1.207439] Disabling lock debugging due to kernel taint
[    1.207620] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.207656] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.207679] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.207692] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.207860] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[    1.207869] No Local Variables are initialized for Method [_GTF]
[    1.207870] No Arguments are initialized for method [_GTF]
[    1.207871] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[    1.207958] ata4.00: ATA-11: KINGSTON SA400S37240G, SBFK71E0, max UDMA/133
[    1.207960] ata4.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.208153] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[    1.208160] No Local Variables are initialized for Method [_GTF]
[    1.208161] No Arguments are initialized for method [_GTF]
[    1.208163] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[    1.208192] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[    1.208196] No Local Variables are initialized for Method [_GTF]
[    1.208197] No Arguments are initialized for method [_GTF]
[    1.208198] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[    1.208204] ata2.00: ATAPI: ATAPI   iHOS104, WL0F, max UDMA/100
[    1.208227] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[    1.208231] No Local Variables are initialized for Method [_GTF]
[    1.208231] No Arguments are initialized for method [_GTF]
[    1.208232] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[    1.208269] ata4.00: configured for UDMA/133
[    1.208287] ata6.00: ATA-9: WDC WD3200LPVX-22V0TT0, 01.01A01, max UDMA/133
[    1.208288] ata6.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.208321] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[    1.208325] No Local Variables are initialized for Method [_GTF]
[    1.208326] No Arguments are initialized for method [_GTF]
[    1.208327] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[    1.208495] ata3.00: ATA-8: WDC WD5000AACS-07G8B0, 05.04C05, max UDMA/133
[    1.208495] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.208825] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[    1.208835] No Local Variables are initialized for Method [_GTF]
[    1.208837] No Arguments are initialized for method [_GTF]
[    1.208839] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[    1.209009] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[    1.209018] No Local Variables are initialized for Method [_GTF]
[    1.209019] No Arguments are initialized for method [_GTF]
[    1.209021] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[    1.209032] ata2.00: configured for UDMA/100
[    1.209116] ata6.00: configured for UDMA/133
[    1.209222] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[    1.209238] No Local Variables are initialized for Method [_GTF]
[    1.209239] No Arguments are initialized for method [_GTF]
[    1.209240] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[    1.209403] ata3.00: configured for UDMA/133
[    1.216838] scsi 1:0:0:0: CD-ROM            ATAPI    iHOS104          WL0F PQ: 0 ANSI: 5
[    1.233907] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    1.245788] usb 1-1.5: new full-speed USB device number 3 using ehci-pci
[    1.247846] nvidia-nvlink: Nvlink Core is being initialized, major device number 238
[    1.248444] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    1.364198] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[    1.364272] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  460.39  Thu Jan 21 21:54:06 UTC 2021
[    1.387946] sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
[    1.387949] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.401522] usb 3-3: New USB device found, idVendor=2109, idProduct=2812, bcdDevice=90.90
[    1.401525] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.401527] usb 3-3: Product: USB2.0 Hub             
[    1.401529] usb 3-3: Manufacturer: VIA Labs, Inc.         
[    1.402090] hub 3-3:1.0: USB hub found
[    1.402443] hub 3-3:1.0: 4 ports detected
[    1.406044] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.406134] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    1.406371] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AACS-0 4C05 PQ: 0 ANSI: 5
[    1.406600] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.406743] scsi 3:0:0:0: Direct-Access     ATA      KINGSTON SA400S3 71E0 PQ: 0 ANSI: 5
[    1.407016] sd 3:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    1.407029] sd 3:0:0:0: [sdb] Write Protect is off
[    1.407031] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.407051] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.407088] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    1.407225] scsi 5:0:0:0: Direct-Access     ATA      WDC WD3200LPVX-2 1A01 PQ: 0 ANSI: 5
[    1.407464] sd 5:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.407466] sd 5:0:0:0: [sdc] 4096-byte physical blocks
[    1.407478] sd 5:0:0:0: [sdc] Write Protect is off
[    1.407479] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.407499] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.407535] sd 5:0:0:0: Attached scsi generic sg3 type 0
[    1.407621] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.407633] sd 2:0:0:0: [sda] Write Protect is off
[    1.407634] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.407654] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.424226] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  460.39  Thu Jan 21 21:49:04 UTC 2021
[    1.426661] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    1.426663] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[    1.428645]  sdb: sdb1 sdb2
[    1.429067] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.436132]  sda: sda1
[    1.436378] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.441775] tsc: Refined TSC clocksource calibration: 3192.746 MHz
[    1.441782] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e058540c6e, max_idle_ns: 440795222505 ns
[    1.441800] clocksource: Switched to clocksource tsc
[    1.453728] usb 1-1.5: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10
[    1.453731] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.453733] usb 1-1.5: Product: USB Receiver
[    1.453734] usb 1-1.5: Manufacturer: Logitech
[    1.457495] hid: raw HID events driver (C) Jiri Kosina
[    1.464769] usbcore: registered new interface driver usbhid
[    1.464770] usbhid: USB HID core driver
[    1.466852] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:046D:C52B.0001/input/input2
[    1.468511]  sdc: sdc1
[    1.468797] sd 5:0:0:0: [sdc] Attached SCSI disk
[    1.476657] random: fast init done
[    1.486706] usb 2-1.5: New USB device found, idVendor=1397, idProduct=0509, bcdDevice= 1.12
[    1.486708] usb 2-1.5: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    1.486709] usb 2-1.5: Product: UMC404HD 192k
[    1.486710] usb 2-1.5: Manufacturer: BEHRINGER
[    1.525856] usb 4-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    1.525921] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.5/input0
[    1.526122] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:046D:C52B.0002/input/input3
[    1.526203] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:046D:C52B.0002/input/input4
[    1.533751] usb 1-1.6: new low-speed USB device number 4 using ehci-pci
[    1.585939] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:046D:C52B.0002/input/input5
[    1.586035] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.5/input1
[    1.586192] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.5/input2
[    1.655341] usb 1-1.6: New USB device found, idVendor=046a, idProduct=b102, bcdDevice= 4.03
[    1.655344] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.655346] usb 1-1.6: Product: USB Wireless Device
[    1.655348] usb 1-1.6: Manufacturer: CHERRY
[    1.661787] input: CHERRY USB Wireless Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:046A:B102.0004/input/input7
[    1.741954] hid-generic 0003:046A:B102.0004: input,hidraw0: USB HID v1.11 Keyboard [CHERRY USB Wireless Device] on usb-0000:00:1a.0-1.6/input0
[    1.756587] input: CHERRY USB Wireless Device Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046A:B102.0005/input/input8
[    1.777986] input: CHERRY USB Wireless Device System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046A:B102.0005/input/input9
[    1.781375] usb 4-3: New USB device found, idVendor=2109, idProduct=0812, bcdDevice=90.91
[    1.781378] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.781380] usb 4-3: Product: USB3.0 Hub             
[    1.781381] usb 4-3: Manufacturer: VIA Labs, Inc.         
[    1.782785] hub 4-3:1.0: USB hub found
[    1.782885] hub 4-3:1.0: 4 ports detected
[    1.837956] input: CHERRY USB Wireless Device Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046A:B102.0005/input/input10
[    1.838050] hid-generic 0003:046A:B102.0005: input,hidraw3: USB HID v1.11 Mouse [CHERRY USB Wireless Device] on usb-0000:00:1a.0-1.6/input1
[    1.870698] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.5/input2
[    1.905775] usb 3-4: new high-speed USB device number 3 using xhci_hcd
[    1.991134] input: Logitech Wireless Device PID:402d Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:402D.0006/input/input11
[    1.991229] input: Logitech Wireless Device PID:402d Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:402D.0006/input/input12
[    1.991344] hid-generic 0003:046D:402D.0006: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:402d] on usb-0000:00:1a.0-1.5/input2:1
[    1.993196] input: Logitech Wireless Device PID:4003 Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:4003.0007/input/input16
[    1.993302] input: Logitech Wireless Device PID:4003 Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:4003.0007/input/input17
[    1.993372] input: Logitech Wireless Device PID:4003 System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:4003.0007/input/input18
[    1.993448] hid-generic 0003:046D:4003.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4003] on usb-0000:00:1a.0-1.5/input2:2
[    2.054791] usb 3-4: New USB device found, idVendor=1058, idProduct=1021, bcdDevice=20.02
[    2.054794] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.054796] usb 3-4: Product: Ext HDD 1021
[    2.054797] usb 3-4: Manufacturer: Western Digital
[    2.054799] usb 3-4: SerialNumber: 574341563538363134333838
[    2.059588] usb-storage 3-4:1.0: USB Mass Storage device detected
[    2.059882] scsi host6: usb-storage 3-4:1.0
[    2.060012] usbcore: registered new interface driver usb-storage
[    2.061783] usbcore: registered new interface driver uas
[    2.108938] logitech-hidpp-device 0003:046D:402D.0006: hidraw2: USB HID v1.11 Keyboard [Logitech M560] on usb-0000:00:1a.0-1.5/input2:1
[    2.145794] usb 3-3.3: new full-speed USB device number 4 using xhci_hcd
[    2.237037] input: Logitech K270 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:4003.0007/input/input22
[    2.237127] logitech-hidpp-device 0003:046D:4003.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K270] on usb-0000:00:1a.0-1.5/input2:2
[    2.260522] usb 3-3.3: New USB device found, idVendor=0b05, idProduct=17cb, bcdDevice= 1.12
[    2.260524] usb 3-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.260526] usb 3-3.3: Product: BCM20702A0
[    2.260527] usb 3-3.3: Manufacturer: Broadcom Corp
[    2.260529] usb 3-3.3: SerialNumber: 5CF3709AF6EC
[    2.338057] usb 4-3.1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[    2.360380] usb 4-3.1: New USB device found, idVendor=05e3, idProduct=0743, bcdDevice= 8.21
[    2.360383] usb 4-3.1: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[    2.360385] usb 4-3.1: Product: USB Storage
[    2.360386] usb 4-3.1: Manufacturer: Generic
[    2.360388] usb 4-3.1: SerialNumber: 000000000821
[    2.362610] usb-storage 4-3.1:1.0: USB Mass Storage device detected
[    2.362694] scsi host7: usb-storage 4-3.1:1.0
[    2.381067] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[    2.594045] systemd[1]: Inserted module 'autofs4'
[    2.640715] systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.657882] systemd[1]: Detected architecture x86-64.
[    2.682570] systemd[1]: Set hostname to <jerom>.
[    2.804585] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[    2.869296] systemd[1]: Created slice system-modprobe.slice.
[    2.869510] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.869683] systemd[1]: Created slice User and Session Slice.
[    2.869739] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.869912] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.869954] systemd[1]: Reached target User and Group Name Lookups.
[    2.869968] systemd[1]: Reached target Remote File Systems.
[    2.869977] systemd[1]: Reached target Slices.
[    2.870086] systemd[1]: Listening on Syslog Socket.
[    2.870167] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.870213] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.870375] systemd[1]: Listening on Journal Audit Socket.
[    2.870454] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.870545] systemd[1]: Listening on Journal Socket.
[    2.870631] systemd[1]: Listening on udev Control Socket.
[    2.870702] systemd[1]: Listening on udev Kernel Socket.
[    2.871500] systemd[1]: Mounting Huge Pages File System...
[    2.872284] systemd[1]: Mounting POSIX Message Queue File System...
[    2.873160] systemd[1]: Mounting Kernel Debug File System...
[    2.874019] systemd[1]: Mounting Kernel Trace File System...
[    2.875262] systemd[1]: Starting Journal Service...
[    2.876149] systemd[1]: Starting Set the console keyboard layout...
[    2.877071] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    2.877105] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[    2.877937] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    2.877969] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    2.879368] systemd[1]: Starting Load Kernel Modules...
[    2.881005] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.882496] systemd[1]: Starting udev Coldplug all Devices...
[    2.885131] systemd[1]: Starting Uncomplicated firewall...
[    2.898579] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[    2.913086] systemd[1]: Mounted Huge Pages File System.
[    2.913234] systemd[1]: Mounted POSIX Message Queue File System.
[    2.913350] systemd[1]: Mounted Kernel Debug File System.
[    2.913459] systemd[1]: Mounted Kernel Trace File System.
[    2.917770] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    2.918346] systemd[1]: Finished Remount Root and Kernel File Systems.
[    2.918800] systemd[1]: Finished Uncomplicated firewall.
[    2.919631] systemd[1]: Activating swap /swapfile...
[    2.920691] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    2.921026] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    2.923607] systemd[1]: Starting Load/Save Random Seed...
[    2.926472] systemd[1]: Starting Create System Users...
[    2.931690] lp: driver loaded but no devices found
[    2.939646] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
[    2.943608] ppdev: user-space parallel port driver
[    2.943840] systemd[1]: Activated swap /swapfile.
[    2.945695] parport_pc 00:05: reported by Plug and Play ACPI
[    2.945771] parport0: PC-style at 0x378, irq 5 [PCSPP]
[    2.947090] systemd[1]: Finished Load/Save Random Seed.
[    2.947389] systemd[1]: Reached target Swap.
[    2.951537] systemd[1]: Finished Create System Users.
[    2.952441] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.964460] systemd[1]: Finished Create Static Device Nodes in /dev.
[    2.965382] systemd[1]: Starting udev Kernel Device Manager...
[    3.034777] systemd[1]: Finished Set the console keyboard layout.
[    3.034926] systemd[1]: Reached target Local File Systems (Pre).
[    3.042008] lp0: using parport0 (interrupt-driven).
[    3.043449] systemd[1]: Finished Load Kernel Modules.
[    3.044363] systemd[1]: Mounting FUSE Control File System...
[    3.045150] systemd[1]: Mounting Kernel Configuration File System...
[    3.048177] systemd[1]: Starting Apply Kernel Variables...
[    3.049213] systemd[1]: Mounted FUSE Control File System.
[    3.061521] systemd[1]: Started udev Kernel Device Manager.
[    3.063053] systemd[1]: Mounted Kernel Configuration File System.
[    3.077127] systemd[1]: Finished udev Coldplug all Devices.
[    3.078019] systemd[1]: Starting Show Plymouth Boot Screen...
[    3.079612] systemd[1]: Finished Apply Kernel Variables.
[    3.081858] scsi 6:0:0:0: Direct-Access     WD       Ext HDD 1021     2002 PQ: 0 ANSI: 4
[    3.082107] sd 6:0:0:0: Attached scsi generic sg4 type 0
[    3.082305] sd 6:0:0:0: [sdd] 1953519616 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.082721] sd 6:0:0:0: [sdd] Test WP failed, assume Write Enabled
[    3.083137] sd 6:0:0:0: [sdd] Asking for cache data failed
[    3.083140] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[    3.097576] systemd[1]: plymouth-start.service: Succeeded.
[    3.097936] systemd[1]: Started Show Plymouth Boot Screen.
[    3.098055] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[    3.098158] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[    3.098176] systemd[1]: Reached target Local Encrypted Volumes.
[    3.101296] systemd[1]: Started Journal Service.
[    3.108501] systemd-journald[291]: Received client request to flush runtime journal.
[    3.245769] nvidia-uvm: Loaded the UVM driver, major device number 235.
[    3.386117] EDAC ie31200: No ECC support
[    3.394539] scsi 7:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0821 PQ: 0 ANSI: 6
[    3.394714] sd 7:0:0:0: Attached scsi generic sg5 type 0
[    3.410597] sd 7:0:0:0: [sde] Attached SCSI removable disk
[    3.427882] at24 0-0050: supply vcc not found, using dummy regulator
[    3.428812] at24 0-0050: 256 byte spd EEPROM, read-only
[    3.428836] at24 0-0051: supply vcc not found, using dummy regulator
[    3.429366] at24 0-0051: 256 byte spd EEPROM, read-only
[    3.429384] at24 0-0052: supply vcc not found, using dummy regulator
[    3.430600] at24 0-0052: 256 byte spd EEPROM, read-only
[    3.430621] at24 0-0053: supply vcc not found, using dummy regulator
[    3.431336] at24 0-0053: 256 byte spd EEPROM, read-only
[    3.437622] asus_wmi: ASUS WMI generic driver loaded
[    3.444782] asus_wmi: Initialization: 0x0
[    3.444817] asus_wmi: BIOS WMI version: 0.9
[    3.444873] asus_wmi: SFUN value: 0x0
[    3.444875] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[    3.447050] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input23
[    3.449580] pstore: Using crash dump compression: deflate
[    3.449592] pstore: Registered efi as persistent store backend
[    3.540321] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[    3.540323] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    3.540323] RAPL PMU: hw unit of domain package 2^-16 Joules
[    3.699151] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    3.700264] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[    3.702760] snd_hda_intel 0000:01:00.1: Disabling MSI
[    3.702768] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    3.720639] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    3.720641] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.720642] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    3.720643] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.720644] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    3.720644] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.720646] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    3.720647] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    3.720648] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    3.723976] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
[    3.724018] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25
[    3.724054] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input26
[    3.724087] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input27
[    3.724120] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input28
[    3.724153] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input29
[    3.734072] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input30
[    3.734115] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input31
[    3.734152] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input32
[    3.734188] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input33
[    3.734224] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input34
[    3.787820] mc: Linux media interface: v0.10
[    3.842820] Bluetooth: Core ver 2.22
[    3.842834] NET: Registered protocol family 31
[    3.842834] Bluetooth: HCI device and connection manager initialized
[    3.842838] Bluetooth: HCI socket layer initialized
[    3.842839] Bluetooth: L2CAP socket layer initialized
[    3.842842] Bluetooth: SCO socket layer initialized
[    3.939590] intel_rapl_common: Found RAPL domain package
[    3.939592] intel_rapl_common: Found RAPL domain core
[    3.939596] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[    3.986591] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.996444] usbcore: registered new interface driver btusb
[    4.108141] Bluetooth: hci0: BCM: chip id 63
[    4.109131] Bluetooth: hci0: BCM: features 0x07
[    4.125192] Bluetooth: hci0: jerom
[    4.125195] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[    4.128790] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
[    4.128794] Bluetooth: hci0: BCM: 'brcm/BCM20702A1-0b05-17cb.hcd'
[    4.128796] Bluetooth: hci0: BCM: 'brcm/BCM-0b05-17cb.hcd'
[    5.128979] usbcore: registered new interface driver snd-usb-audio
[   15.291729]  sdd: sdd1
[   15.293708] sd 6:0:0:0: [sdd] Attached SCSI disk
[   15.306260] random: crng init done
[   16.595320] audit: type=1400 audit(1615754777.587:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=782 comm="apparmor_parser"
[   16.599021] audit: type=1400 audit(1615754777.591:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=781 comm="apparmor_parser"
[   16.599023] audit: type=1400 audit(1615754777.591:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=781 comm="apparmor_parser"
[   16.599025] audit: type=1400 audit(1615754777.591:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=781 comm="apparmor_parser"
[   16.604094] audit: type=1400 audit(1615754777.595:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=783 comm="apparmor_parser"
[   16.620025] audit: type=1400 audit(1615754777.611:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=785 comm="apparmor_parser"
[   16.692268] audit: type=1400 audit(1615754777.683:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=786 comm="apparmor_parser"
[   16.692271] audit: type=1400 audit(1615754777.683:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=786 comm="apparmor_parser"
[   16.697684] audit: type=1400 audit(1615754777.687:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=788 comm="apparmor_parser"
[   16.699735] audit: type=1400 audit(1615754777.691:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=789 comm="apparmor_parser"
[   17.180414] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.180416] Bluetooth: BNEP filters: protocol multicast
[   17.180420] Bluetooth: BNEP socket layer initialized
[   17.200325] NET: Registered protocol family 38
[   17.231033] fbcon: Taking over console
[   17.232376] Console: switching to colour frame buffer device 128x48
[   17.529764] Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[   17.697868] r8169 0000:03:00.0 enp3s0: Link is Down
[   18.040577] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[   18.040815] caller os_map_kernel_space.part.0+0x77/0xa0 [nvidia] mapping multiple BARs
[   20.478861] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
[   20.478975] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   20.717190] Bluetooth: RFCOMM TTY layer initialized
[   20.717195] Bluetooth: RFCOMM socket layer initialized
[   20.717199] Bluetooth: RFCOMM ver 1.11
[   20.797824] vboxdrv: Found 2 processor cores
[   20.831420] vboxdrv: TSC mode is Invariant, tentative frequency 3192742163 Hz
[   20.831421] vboxdrv: Successfully loaded version 6.1.16_Ubuntu (interface 0x00300000)
[   20.839402] VBoxNetFlt: Successfully started.
[   20.851611] VBoxNetAdp: Successfully started.
[   27.678617] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[   27.682539] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[   27.690557] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[   27.706620] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[   27.714794] logitech-hidpp-device 0003:046D:402D.0006: HID++ 2.0 device connected.
[   27.722620] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[   27.736544] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[   27.752624] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[   27.768623] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[   27.784622] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[   27.798537] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[   27.814550] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[   27.830619] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[   27.844541] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[   27.860532] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[   27.876530] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[   27.892529] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[   27.900598] input: Logitech Wireless Mouse M560 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:402D.0006/input/input35

bootctl

Failed to read "/boot/efi/EFI/systemd": Permission non accor>
Failed to open "/boot/efi/loader/loader.conf": Permission no>
System:
     Firmware: n/a (n/a)
  Secure Boot: disabled
   Setup Mode: setup

Current Boot Loader:
      Product: n/a
     Features: ✗ Boot counting
               ✗ Menu timeout control
               ✗ One-shot menu timeout control
               ✗ Default entry control
               ✗ One-shot entry control
               ✗ Support for XBOOTLDR partition
               ✗ Support for passing random seed to OS
               ✗ Boot loader sets ESP partition information
          ESP: n/a
         File: └─n/a

Random Seed:
 Passed to OS: no
 System Token: not set
       Exists: no

Available Boot Loaders on ESP:
          ESP: /boot/efi (/dev/disk/by-partuuid/9643d784-dcd>

Boot Loaders Listed in EFI Variables:
        Title: ubuntu
           ID: 0x0000
       Status: active, boot-order
    Partition: /dev/disk/by-partuuid/9643d784-dcd1-4c3b-ac22>
         File: └─/EFI/ubuntu/shimx64.efi

        Title: UEFI OS
           ID: 0x0003
       Status: active, boot-order
    Partition: /dev/disk/by-partuuid/9643d784-dcd1-4c3b-ac22>
         File: └─/EFI/BOOT/BOOTX64.EFI

        Title: ubuntu
           ID: 0x0004
       Status: active, boot-order
    Partition: /dev/disk/by-partuuid/9643d784-dcd1-4c3b-ac22>
         File: └─EFI/Ubuntu/grubx64.efi

Boot Loader Entries:
        $BOOT: /boot/efi (/dev/disk/by-partuuid/9643d784-dcd>

et le log de Xorg

[    17.397] (--) Log file renamed from "/var/log/Xorg.pid-977.log" to "/var/log/Xorg.0.log"
[    17.399] 
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[    17.399] Build Operating System: Linux 4.15.0-130-generic x86_64 Ubuntu
[    17.399] Current Operating System: Linux jerom 5.8.0-44-generic #50~20.04.1-Ubuntu SMP Wed Feb 10 21:07:30 UTC 2021 x86_64
[    17.399] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-44-generic root=UUID=856b3dc0-e042-4095-9fdd-0893bec759d6 ro quiet splash vt.handoff=7
[    17.399] Build Date: 17 January 2021  09:13:31AM
[    17.399] xorg-server 2:1.20.9-2ubuntu1.2~20.04.1 (For technical support please see http://www.ubuntu.com/support) 
[    17.399] Current version of pixman: 0.38.4
[    17.399] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    17.399] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    17.399] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 14 21:46:18 2021
[    17.404] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    17.413] (==) No Layout section.  Using the first Screen section.
[    17.413] (==) No screen section available. Using defaults.
[    17.413] (**) |-->Screen "Default Screen Section" (0)
[    17.413] (**) |   |-->Monitor "<default monitor>"
[    17.416] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    17.416] (==) Automatically adding devices
[    17.416] (==) Automatically enabling devices
[    17.416] (==) Automatically adding GPU devices
[    17.416] (==) Automatically binding GPU devices
[    17.416] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    17.416] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    17.416] 	Entry deleted from font path.
[    17.416] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    17.416] 	Entry deleted from font path.
[    17.416] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    17.416] 	Entry deleted from font path.
[    17.416] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    17.416] 	Entry deleted from font path.
[    17.416] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    17.416] 	Entry deleted from font path.
[    17.416] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    17.416] (==) ModulePath set to "/usr/lib/xorg/modules"
[    17.416] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    17.416] (II) Loader magic: 0x559d31ba8020
[    17.416] (II) Module ABI versions:
[    17.416] 	X.Org ANSI C Emulation: 0.4
[    17.416] 	X.Org Video Driver: 24.1
[    17.416] 	X.Org XInput driver : 24.1
[    17.416] 	X.Org Server Extension : 10.0
[    17.417] (++) using VT number 1

[    17.417] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    17.417] (II) xfree86: Adding drm device (/dev/dri/card0)
[    17.418] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/x86_64-linux-gnu/nvidia/xorg,/usr/lib/xorg/modules"
[    17.419] (--) PCI:*(1@0:0:0) 10de:1c82:19da:2454 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[    17.419] (II) LoadModule: "glx"
[    17.424] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    17.448] (II) Module glx: vendor="X.Org Foundation"
[    17.448] 	compiled for 1.20.9, module version = 1.0.0
[    17.448] 	ABI class: X.Org Server Extension, version 10.0
[    17.448] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[    17.448] 	loading driver: nvidia
[    17.708] (==) Matched nvidia as autoconfigured driver 0
[    17.708] (==) Matched nouveau as autoconfigured driver 1
[    17.708] (==) Matched modesetting as autoconfigured driver 2
[    17.708] (==) Matched fbdev as autoconfigured driver 3
[    17.708] (==) Matched vesa as autoconfigured driver 4
[    17.708] (==) Assigned the driver to the xf86ConfigLayout
[    17.708] (II) LoadModule: "nvidia"
[    17.708] (II) Loading /usr/lib/x86_64-linux-gnu/nvidia/xorg/nvidia_drv.so
[    17.717] (II) Module nvidia: vendor="NVIDIA Corporation"
[    17.717] 	compiled for 1.6.99.901, module version = 1.0.0
[    17.717] 	Module class: X.Org Video Driver
[    17.718] (II) LoadModule: "nouveau"
[    17.718] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    17.720] (II) Module nouveau: vendor="X.Org Foundation"
[    17.721] 	compiled for 1.20.3, module version = 1.0.16
[    17.721] 	Module class: X.Org Video Driver
[    17.721] 	ABI class: X.Org Video Driver, version 24.0
[    17.721] (II) LoadModule: "modesetting"
[    17.721] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    17.722] (II) Module modesetting: vendor="X.Org Foundation"
[    17.722] 	compiled for 1.20.9, module version = 1.20.9
[    17.722] 	Module class: X.Org Video Driver
[    17.722] 	ABI class: X.Org Video Driver, version 24.1
[    17.722] (II) LoadModule: "fbdev"
[    17.722] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    17.723] (II) Module fbdev: vendor="X.Org Foundation"
[    17.723] 	compiled for 1.20.1, module version = 0.5.0
[    17.723] 	Module class: X.Org Video Driver
[    17.723] 	ABI class: X.Org Video Driver, version 24.0
[    17.723] (II) LoadModule: "vesa"
[    17.723] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    17.723] (II) Module vesa: vendor="X.Org Foundation"
[    17.723] 	compiled for 1.20.4, module version = 2.4.0
[    17.723] 	Module class: X.Org Video Driver
[    17.724] 	ABI class: X.Org Video Driver, version 24.0
[    17.724] (II) NVIDIA dlloader X Driver  460.39  Thu Jan 21 21:54:11 UTC 2021
[    17.724] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    17.724] (II) NOUVEAU driver Date:   Mon Jan 28 23:25:58 2019 -0500
[    17.724] (II) NOUVEAU driver for NVIDIA chipset families :
[    17.724] 	RIVA TNT            (NV04)
[    17.724] 	RIVA TNT2           (NV05)
[    17.724] 	GeForce 256         (NV10)
[    17.724] 	GeForce 2           (NV11, NV15)
[    17.724] 	GeForce 4MX         (NV17, NV18)
[    17.724] 	GeForce 3           (NV20)
[    17.724] 	GeForce 4Ti         (NV25, NV28)
[    17.724] 	GeForce FX          (NV3x)
[    17.724] 	GeForce 6           (NV4x)
[    17.724] 	GeForce 7           (G7x)
[    17.724] 	GeForce 8           (G8x)
[    17.724] 	GeForce 9           (G9x)
[    17.724] 	GeForce GTX 2xx/3xx (GT2xx)
[    17.724] 	GeForce GTX 4xx/5xx (GFxxx)
[    17.724] 	GeForce GTX 6xx/7xx (GKxxx)
[    17.724] 	GeForce GTX 9xx     (GMxxx)
[    17.724] 	GeForce GTX 10xx    (GPxxx)
[    17.725] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    17.725] (II) FBDEV: driver for framebuffer: fbdev
[    17.725] (II) VESA: driver for VESA chipsets: vesa
[    17.727] (II) Loading sub module "fb"
[    17.727] (II) LoadModule: "fb"
[    17.727] (II) Loading /usr/lib/xorg/modules/libfb.so
[    17.728] (II) Module fb: vendor="X.Org Foundation"
[    17.728] 	compiled for 1.20.9, module version = 1.0.0
[    17.728] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    17.728] (II) Loading sub module "wfb"
[    17.728] (II) LoadModule: "wfb"
[    17.729] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    17.730] (II) Module wfb: vendor="X.Org Foundation"
[    17.730] 	compiled for 1.20.9, module version = 1.0.0
[    17.730] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    17.730] (II) Loading sub module "ramdac"
[    17.730] (II) LoadModule: "ramdac"
[    17.730] (II) Module "ramdac" already built-in
[    17.732] (WW) Falling back to old probe method for modesetting
[    17.732] (WW) Falling back to old probe method for fbdev
[    17.732] (II) Loading sub module "fbdevhw"
[    17.732] (II) LoadModule: "fbdevhw"
[    17.732] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    17.733] (II) Module fbdevhw: vendor="X.Org Foundation"
[    17.733] 	compiled for 1.20.9, module version = 0.0.2
[    17.733] 	ABI class: X.Org Video Driver, version 24.1
[    17.733] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    17.733] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    17.733] (==) NVIDIA(0): RGB weight 888
[    17.733] (==) NVIDIA(0): Default visual is TrueColor
[    17.733] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    17.734] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[    17.734] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    17.734] (**) NVIDIA(0): Enabling 2D acceleration
[    17.734] (II) Loading sub module "glxserver_nvidia"
[    17.734] (II) LoadModule: "glxserver_nvidia"
[    17.734] (II) Loading /usr/lib/x86_64-linux-gnu/nvidia/xorg/libglxserver_nvidia.so
[    17.826] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[    17.826] 	compiled for 1.6.99.901, module version = 1.0.0
[    17.826] 	Module class: X.Org Server Extension
[    17.826] (II) NVIDIA GLX Module  460.39  Thu Jan 21 21:51:40 UTC 2021
[    17.829] (II) NVIDIA: The X server supports PRIME Render Offload.
[    18.556] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[    18.556] (--) NVIDIA(0):     DFP-0
[    18.556] (--) NVIDIA(0):     DFP-1 (boot)
[    18.556] (--) NVIDIA(0):     DFP-2
[    18.556] (--) NVIDIA(0):     DFP-3
[    18.557] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1050 Ti (GP107-A) at PCI:1:0:0 (GPU-0)
[    18.557] (--) NVIDIA(0): Memory: 4194304 kBytes
[    18.557] (--) NVIDIA(0): VideoBIOS: 86.07.22.00.53
[    18.557] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    18.557] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    18.557] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    18.557] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    18.557] (--) NVIDIA(GPU-0): 
[    18.586] (--) NVIDIA(GPU-0): Samsung SMB2430H (DFP-1): connected
[    18.586] (--) NVIDIA(GPU-0): Samsung SMB2430H (DFP-1): Internal TMDS
[    18.586] (--) NVIDIA(GPU-0): Samsung SMB2430H (DFP-1): 600.0 MHz maximum pixel clock
[    18.586] (--) NVIDIA(GPU-0): 
[    18.586] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    18.586] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    18.586] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[    18.586] (--) NVIDIA(GPU-0): 
[    18.586] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    18.586] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    18.586] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    18.586] (--) NVIDIA(GPU-0): 
[    18.592] (==) NVIDIA(0): 
[    18.592] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    18.592] (==) NVIDIA(0):     will be used as the requested mode.
[    18.592] (==) NVIDIA(0): 
[    18.592] (II) NVIDIA(0): Validated MetaModes:
[    18.592] (II) NVIDIA(0):     "DFP-1:nvidia-auto-select"
[    18.592] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    18.598] (--) NVIDIA(0): DPI set to (304, 304); computed from "UseEdidDpi" X config
[    18.598] (--) NVIDIA(0):     option
[    18.598] (II) UnloadModule: "nouveau"
[    18.598] (II) Unloading nouveau
[    18.598] (II) UnloadModule: "modesetting"
[    18.598] (II) Unloading modesetting
[    18.598] (II) UnloadModule: "fbdev"
[    18.598] (II) Unloading fbdev
[    18.598] (II) UnloadSubModule: "fbdevhw"
[    18.598] (II) Unloading fbdevhw
[    18.598] (II) UnloadModule: "vesa"
[    18.598] (II) Unloading vesa
[    18.599] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[    18.599] (II) NVIDIA:     access.
[    18.621] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[    18.673] (==) NVIDIA(0): Disabling shared memory pixmaps
[    18.673] (==) NVIDIA(0): Backing store enabled
[    18.673] (==) NVIDIA(0): Silken mouse enabled
[    18.675] (==) NVIDIA(0): DPMS enabled
[    18.675] (II) Loading sub module "dri2"
[    18.676] (II) LoadModule: "dri2"
[    18.676] (II) Module "dri2" already built-in
[    18.676] (II) NVIDIA(0): [DRI2] Setup complete
[    18.676] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    18.676] (II) Initializing extension Generic Event Extension
[    18.676] (II) Initializing extension SHAPE
[    18.676] (II) Initializing extension MIT-SHM
[    18.677] (II) Initializing extension XInputExtension
[    18.677] (II) Initializing extension XTEST
[    18.677] (II) Initializing extension BIG-REQUESTS
[    18.678] (II) Initializing extension SYNC
[    18.678] (II) Initializing extension XKEYBOARD
[    18.678] (II) Initializing extension XC-MISC
[    18.678] (II) Initializing extension SECURITY
[    18.678] (II) Initializing extension XFIXES
[    18.678] (II) Initializing extension RENDER
[    18.678] (II) Initializing extension RANDR
[    18.679] (II) Initializing extension COMPOSITE
[    18.679] (II) Initializing extension DAMAGE
[    18.679] (II) Initializing extension MIT-SCREEN-SAVER
[    18.679] (II) Initializing extension DOUBLE-BUFFER
[    18.679] (II) Initializing extension RECORD
[    18.679] (II) Initializing extension DPMS
[    18.679] (II) Initializing extension Present
[    18.680] (II) Initializing extension DRI3
[    18.680] (II) Initializing extension X-Resource
[    18.680] (II) Initializing extension XVideo
[    18.680] (II) Initializing extension XVideo-MotionCompensation
[    18.680] (II) Initializing extension SELinux
[    18.680] (II) SELinux: Disabled on system
[    18.680] (II) Initializing extension GLX
[    18.680] (II) Initializing extension GLX
[    18.680] (II) Indirect GLX disabled.
[    18.680] (II) GLX: Another vendor is already registered for screen 0
[    18.680] (II) Initializing extension XFree86-VidModeExtension
[    18.680] (II) Initializing extension XFree86-DGA
[    18.680] (II) Initializing extension XFree86-DRI
[    18.680] (II) Initializing extension DRI2
[    18.681] (II) Initializing extension NV-GLX
[    18.681] (II) Initializing extension NV-CONTROL
[    18.681] (II) Initializing extension XINERAMA
[    18.762] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    18.762] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    18.762] (II) LoadModule: "libinput"
[    18.762] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    18.767] (II) Module libinput: vendor="X.Org Foundation"
[    18.768] 	compiled for 1.20.4, module version = 0.29.0
[    18.768] 	Module class: X.Org XInput Driver
[    18.768] 	ABI class: X.Org XInput driver, version 24.1
[    18.768] (II) Using input driver 'libinput' for 'Power Button'
[    18.768] (**) Power Button: always reports core events
[    18.768] (**) Option "Device" "/dev/input/event1"
[    18.768] (**) Option "_source" "server/udev"
[    18.773] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    18.773] (II) event1  - Power Button: device is a keyboard
[    18.774] (II) event1  - Power Button: device removed
[    18.797] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    18.797] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    18.797] (**) Option "xkb_model" "pc105"
[    18.797] (**) Option "xkb_layout" "fr"
[    18.797] (**) Option "xkb_variant" "oss_nodeadkeys"
[    18.819] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    18.819] (II) event1  - Power Button: device is a keyboard
[    18.820] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    18.820] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    18.820] (II) Using input driver 'libinput' for 'Power Button'
[    18.820] (**) Power Button: always reports core events
[    18.820] (**) Option "Device" "/dev/input/event0"
[    18.820] (**) Option "_source" "server/udev"
[    18.821] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    18.821] (II) event0  - Power Button: device is a keyboard
[    18.821] (II) event0  - Power Button: device removed
[    18.833] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    18.833] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    18.833] (**) Option "xkb_model" "pc105"
[    18.833] (**) Option "xkb_layout" "fr"
[    18.833] (**) Option "xkb_variant" "oss_nodeadkeys"
[    18.835] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    18.835] (II) event0  - Power Button: device is a keyboard
[    18.836] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event8)
[    18.836] (II) No input driver specified, ignoring this device.
[    18.836] (II) This device may have been added with another device file.
[    18.837] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[    18.837] (II) No input driver specified, ignoring this device.
[    18.837] (II) This device may have been added with another device file.
[    18.837] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event10)
[    18.837] (II) No input driver specified, ignoring this device.
[    18.837] (II) This device may have been added with another device file.
[    18.838] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[    18.838] (II) No input driver specified, ignoring this device.
[    18.838] (II) This device may have been added with another device file.
[    18.838] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event12)
[    18.838] (II) No input driver specified, ignoring this device.
[    18.838] (II) This device may have been added with another device file.
[    18.839] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event13)
[    18.839] (II) No input driver specified, ignoring this device.
[    18.839] (II) This device may have been added with another device file.
[    18.840] (II) config/udev: Adding input device Logitech K270 (/dev/input/event5)
[    18.840] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[    18.840] (II) Using input driver 'libinput' for 'Logitech K270'
[    18.840] (**) Logitech K270: always reports core events
[    18.840] (**) Option "Device" "/dev/input/event5"
[    18.840] (**) Option "_source" "server/udev"
[    18.842] (II) event5  - Logitech K270: is tagged by udev as: Keyboard
[    18.842] (II) event5  - Logitech K270: device is a keyboard
[    18.842] (II) event5  - Logitech K270: device removed
[    18.849] (II) libinput: Logitech K270: needs a virtual subdevice
[    18.849] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:4003.0007/input/input22/event5"
[    18.849] (II) XINPUT: Adding extended input device "Logitech K270" (type: MOUSE, id 8)
[    18.850] (**) Option "AccelerationScheme" "none"
[    18.850] (**) Logitech K270: (accel) selected scheme none/0
[    18.850] (**) Logitech K270: (accel) acceleration factor: 2.000
[    18.850] (**) Logitech K270: (accel) acceleration threshold: 4
[    18.853] (II) event5  - Logitech K270: is tagged by udev as: Keyboard
[    18.853] (II) event5  - Logitech K270: device is a keyboard
[    18.854] (II) config/udev: Adding input device CHERRY USB Wireless Device (/dev/input/event2)
[    18.854] (**) CHERRY USB Wireless Device: Applying InputClass "libinput keyboard catchall"
[    18.854] (II) Using input driver 'libinput' for 'CHERRY USB Wireless Device'
[    18.854] (**) CHERRY USB Wireless Device: always reports core events
[    18.854] (**) Option "Device" "/dev/input/event2"
[    18.854] (**) Option "_source" "server/udev"
[    18.857] (II) event2  - CHERRY USB Wireless Device: is tagged by udev as: Keyboard
[    18.857] (II) event2  - CHERRY USB Wireless Device: device is a keyboard
[    18.857] (II) event2  - CHERRY USB Wireless Device: device removed
[    18.873] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:046A:B102.0004/input/input7/event2"
[    18.873] (II) XINPUT: Adding extended input device "CHERRY USB Wireless Device" (type: KEYBOARD, id 9)
[    18.873] (**) Option "xkb_model" "pc105"
[    18.873] (**) Option "xkb_layout" "fr"
[    18.873] (**) Option "xkb_variant" "oss_nodeadkeys"
[    18.876] (II) event2  - CHERRY USB Wireless Device: is tagged by udev as: Keyboard
[    18.876] (II) event2  - CHERRY USB Wireless Device: device is a keyboard
[    18.878] (II) config/udev: Adding input device CHERRY USB Wireless Device Consumer Control (/dev/input/event6)
[    18.878] (**) CHERRY USB Wireless Device Consumer Control: Applying InputClass "libinput keyboard catchall"
[    18.878] (II) Using input driver 'libinput' for 'CHERRY USB Wireless Device Consumer Control'
[    18.878] (**) CHERRY USB Wireless Device Consumer Control: always reports core events
[    18.878] (**) Option "Device" "/dev/input/event6"
[    18.878] (**) Option "_source" "server/udev"
[    18.880] (II) event6  - CHERRY USB Wireless Device Consumer Control: is tagged by udev as: Keyboard
[    18.880] (II) event6  - CHERRY USB Wireless Device Consumer Control: device is a keyboard
[    18.880] (II) event6  - CHERRY USB Wireless Device Consumer Control: device removed
[    18.897] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046A:B102.0005/input/input10/event6"
[    18.897] (II) XINPUT: Adding extended input device "CHERRY USB Wireless Device Consumer Control" (type: KEYBOARD, id 10)
[    18.897] (**) Option "xkb_model" "pc105"
[    18.897] (**) Option "xkb_layout" "fr"
[    18.897] (**) Option "xkb_variant" "oss_nodeadkeys"
[    18.900] (II) event6  - CHERRY USB Wireless Device Consumer Control: is tagged by udev as: Keyboard
[    18.900] (II) event6  - CHERRY USB Wireless Device Consumer Control: device is a keyboard
[    18.902] (II) config/udev: Adding input device CHERRY USB Wireless Device Mouse (/dev/input/event3)
[    18.902] (**) CHERRY USB Wireless Device Mouse: Applying InputClass "libinput pointer catchall"
[    18.902] (II) Using input driver 'libinput' for 'CHERRY USB Wireless Device Mouse'
[    18.902] (**) CHERRY USB Wireless Device Mouse: always reports core events
[    18.902] (**) Option "Device" "/dev/input/event3"
[    18.902] (**) Option "_source" "server/udev"
[    18.904] (II) event3  - CHERRY USB Wireless Device Mouse: is tagged by udev as: Mouse
[    18.904] (II) event3  - CHERRY USB Wireless Device Mouse: device is a pointer
[    18.904] (II) event3  - CHERRY USB Wireless Device Mouse: device removed
[    18.937] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046A:B102.0005/input/input8/event3"
[    18.937] (II) XINPUT: Adding extended input device "CHERRY USB Wireless Device Mouse" (type: MOUSE, id 11)
[    18.937] (**) Option "AccelerationScheme" "none"
[    18.938] (**) CHERRY USB Wireless Device Mouse: (accel) selected scheme none/0
[    18.938] (**) CHERRY USB Wireless Device Mouse: (accel) acceleration factor: 2.000
[    18.938] (**) CHERRY USB Wireless Device Mouse: (accel) acceleration threshold: 4
[    18.940] (II) event3  - CHERRY USB Wireless Device Mouse: is tagged by udev as: Mouse
[    18.941] (II) event3  - CHERRY USB Wireless Device Mouse: device is a pointer
[    18.942] (II) config/udev: Adding input device CHERRY USB Wireless Device Mouse (/dev/input/mouse0)
[    18.942] (II) No input driver specified, ignoring this device.
[    18.942] (II) This device may have been added with another device file.
[    18.943] (II) config/udev: Adding input device CHERRY USB Wireless Device System Control (/dev/input/event4)
[    18.943] (**) CHERRY USB Wireless Device System Control: Applying InputClass "libinput keyboard catchall"
[    18.943] (II) Using input driver 'libinput' for 'CHERRY USB Wireless Device System Control'
[    18.943] (**) CHERRY USB Wireless Device System Control: always reports core events
[    18.943] (**) Option "Device" "/dev/input/event4"
[    18.943] (**) Option "_source" "server/udev"
[    18.944] (II) event4  - CHERRY USB Wireless Device System Control: is tagged by udev as: Keyboard
[    18.945] (II) event4  - CHERRY USB Wireless Device System Control: device is a keyboard
[    18.945] (II) event4  - CHERRY USB Wireless Device System Control: device removed
[    18.965] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046A:B102.0005/input/input9/event4"
[    18.965] (II) XINPUT: Adding extended input device "CHERRY USB Wireless Device System Control" (type: KEYBOARD, id 12)
[    18.965] (**) Option "xkb_model" "pc105"
[    18.965] (**) Option "xkb_layout" "fr"
[    18.965] (**) Option "xkb_variant" "oss_nodeadkeys"
[    18.968] (II) event4  - CHERRY USB Wireless Device System Control: is tagged by udev as: Keyboard
[    18.969] (II) event4  - CHERRY USB Wireless Device System Control: device is a keyboard
[    18.969] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event14)
[    18.969] (II) No input driver specified, ignoring this device.
[    18.969] (II) This device may have been added with another device file.
[    18.970] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event15)
[    18.970] (II) No input driver specified, ignoring this device.
[    18.970] (II) This device may have been added with another device file.
[    18.971] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event16)
[    18.971] (II) No input driver specified, ignoring this device.
[    18.971] (II) This device may have been added with another device file.
[    18.971] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event17)
[    18.971] (II) No input driver specified, ignoring this device.
[    18.971] (II) This device may have been added with another device file.
[    18.972] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event18)
[    18.972] (II) No input driver specified, ignoring this device.
[    18.972] (II) This device may have been added with another device file.
[    18.973] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[    18.973] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    18.973] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[    18.973] (**) Eee PC WMI hotkeys: always reports core events
[    18.973] (**) Option "Device" "/dev/input/event7"
[    18.973] (**) Option "_source" "server/udev"
[    18.974] (II) event7  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[    18.974] (II) event7  - Eee PC WMI hotkeys: device is a keyboard
[    18.974] (II) event7  - Eee PC WMI hotkeys: device removed
[    18.989] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input23/event7"
[    18.989] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 13)
[    18.989] (**) Option "xkb_model" "pc105"
[    18.989] (**) Option "xkb_layout" "fr"
[    18.989] (**) Option "xkb_variant" "oss_nodeadkeys"
[    18.991] (II) event7  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[    18.991] (II) event7  - Eee PC WMI hotkeys: device is a keyboard
[    19.002] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[    19.002] (II) Using input driver 'libinput' for 'Logitech K270'
[    19.002] (**) Logitech K270: always reports core events
[    19.002] (**) Option "Device" "/dev/input/event5"
[    19.002] (**) Option "_source" "_driver/libinput"
[    19.002] (II) libinput: Logitech K270: is a virtual subdevice
[    19.002] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:4003.0007/input/input22/event5"
[    19.002] (II) XINPUT: Adding extended input device "Logitech K270" (type: KEYBOARD, id 14)
[    19.002] (**) Option "xkb_model" "pc105"
[    19.002] (**) Option "xkb_layout" "fr"
[    19.002] (**) Option "xkb_variant" "oss_nodeadkeys"
[    19.007] (EE) Failed to open authorization file "/var/run/sddm/{a1e401ee-9337-463f-9489-dcb7dcf49a52}": No such file or directory
[    21.145] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    21.145] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    21.145] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    21.145] (--) NVIDIA(GPU-0): 
[    21.179] (--) NVIDIA(GPU-0): Samsung SMB2430H (DFP-1): connected
[    21.179] (--) NVIDIA(GPU-0): Samsung SMB2430H (DFP-1): Internal TMDS
[    21.179] (--) NVIDIA(GPU-0): Samsung SMB2430H (DFP-1): 600.0 MHz maximum pixel clock
[    21.179] (--) NVIDIA(GPU-0): 
[    21.179] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    21.179] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    21.179] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[    21.179] (--) NVIDIA(GPU-0): 
[    21.179] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    21.179] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    21.179] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    21.179] (--) NVIDIA(GPU-0): 
[    21.503] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    21.503] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    21.503] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    21.503] (--) NVIDIA(GPU-0): 
[    21.537] (--) NVIDIA(GPU-0): Samsung SMB2430H (DFP-1): connected
[    21.537] (--) NVIDIA(GPU-0): Samsung SMB2430H (DFP-1): Internal TMDS
[    21.537] (--) NVIDIA(GPU-0): Samsung SMB2430H (DFP-1): 600.0 MHz maximum pixel clock
[    21.537] (--) NVIDIA(GPU-0): 
[    21.537] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    21.537] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    21.537] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[    21.537] (--) NVIDIA(GPU-0): 
[    21.538] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    21.538] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    21.538] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    21.538] (--) NVIDIA(GPU-0): 
[    27.909] (II) config/udev: Adding input device Logitech Wireless Mouse M560 (/dev/input/mouse1)
[    27.909] (II) No input driver specified, ignoring this device.
[    27.909] (II) This device may have been added with another device file.
[    27.953] (II) config/udev: Adding input device Logitech Wireless Mouse M560 (/dev/input/event19)
[    27.953] (**) Logitech Wireless Mouse M560: Applying InputClass "libinput pointer catchall"
[    27.953] (II) Using input driver 'libinput' for 'Logitech Wireless Mouse M560'
[    27.953] (**) Logitech Wireless Mouse M560: always reports core events
[    27.953] (**) Option "Device" "/dev/input/event19"
[    27.953] (**) Option "_source" "server/udev"
[    27.955] (II) event19 - Logitech Wireless Mouse M560: is tagged by udev as: Mouse
[    27.955] (II) event19 - Logitech Wireless Mouse M560: device is a pointer
[    27.956] (II) event19 - Logitech Wireless Mouse M560: device removed
[    27.985] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:402D.0006/input/input35/event19"
[    27.985] (II) XINPUT: Adding extended input device "Logitech Wireless Mouse M560" (type: MOUSE, id 15)
[    27.986] (**) Option "AccelerationScheme" "none"
[    27.986] (**) Logitech Wireless Mouse M560: (accel) selected scheme none/0
[    27.986] (**) Logitech Wireless Mouse M560: (accel) acceleration factor: 2.000
[    27.986] (**) Logitech Wireless Mouse M560: (accel) acceleration threshold: 4
[    27.988] (II) event19 - Logitech Wireless Mouse M560: is tagged by udev as: Mouse
[    27.988] (II) event19 - Logitech Wireless Mouse M560: device is a pointer

En espérant que ça aide!
Merci beaucoup!

Dernière modification par jerm (Le 14/03/2021, à 23:02)

Nuliel · Le 14/03/2021, à 23:21

Je ne vois pas d'erreur vraiment en lien avec nvidia. Le logiciel de configuration nvidia te permet t'il d'augmenter la résolution?

lspci -k

te dit bien "kernel driver in use: nvidia"?

xubu1957 · Le 14/03/2021, à 23:23

Bonjour,

@Nuliel

[    17.399] Build Operating System: Linux 4.15.0-130-generic x86_64 Ubuntu
[    17.399] Current Operating System: Linux jerom 5.8.0-44-generic #50~20.04.1-Ubuntu SMP Wed Feb 10 21:07:30 UTC 2021 x86_64

Pourquoi le système cause du noyau 4.15.0-130 ?

Dernière modification par xubu1957 (Le 14/03/2021, à 23:24)

Nuliel · Le 14/03/2021, à 23:25

Exact! C'est bizarre
Je veux bien les retours de

uname -r

et

dpkg -l | grep nvidia

dpkg -l | grep -v ^ii | grep -v ^rc

Dernière modification par Nuliel (Le 14/03/2021, à 23:26)

jerm · Le 15/03/2021, à 07:44

Bonjour!

Voici les différents retour demandés:

lspci -k

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
        Subsystem: ASUSTeK Computer Inc. P8 series motherboard
        Kernel driver in use: ivb_uncore
        Kernel modules: ie31200_edac
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
        Kernel driver in use: pcieport
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
        Subsystem: ASUSTeK Computer Inc. P8 series motherboard
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci
00:16.0 Communication controller: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 (rev 04)
        Subsystem: ASUSTeK Computer Inc. P8 series motherboard
        Kernel driver in use: mei_me
        Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 (rev 04)
        Subsystem: ASUSTeK Computer Inc. P8 series motherboard
        Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller (rev 04)
        Subsystem: ASUSTeK Computer Inc. P8Z77-V LX Motherboard
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 (rev c4)
        Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4)
        Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 (rev 04)
        Subsystem: ASUSTeK Computer Inc. P8 series motherboard
        Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4)
00:1f.0 ISA bridge: Intel Corporation B75 Express Chipset LPC Controller (rev 04)
        Subsystem: ASUSTeK Computer Inc. B75 Express Chipset LPC Controller
        Kernel driver in use: lpc_ich
        Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
        Subsystem: ASUSTeK Computer Inc. P8 series motherboard
        Kernel driver in use: ahci
        Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller (rev 04)
        Subsystem: ASUSTeK Computer Inc. P8 series motherboard
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801
01:00.0 VGA compatible controller: NVIDIA Corporation GP107 [GeForce GTX 1050 Ti] (rev a1)
        Subsystem: ZOTAC International (MCO) Ltd. GP107 [GeForce GTX 1050 Ti]
        Kernel driver in use: nvidia
        Kernel modules: nvidiafb, nouveau, nvidia_drm, nvidia
01:00.1 Audio device: NVIDIA Corporation GP107GL High Definition Audio Controller (rev a1)
        Subsystem: ZOTAC International (MCO) Ltd. GP107GL High Definition Audio Controller
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
        Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
        Kernel driver in use: r8169
        Kernel modules: r8169

uname -r

5.8.0-44-generic

dpkg -l | grep nvidia

ii  libnvidia-cfg1-460:amd64                      460.39-0ubuntu0.20.04.1                     amd64        NVIDIA binary OpenGL/GLX configuration library
ii  libnvidia-common-460                          460.39-0ubuntu0.20.04.1                     all          Shared files used by the NVIDIA libraries
ii  libnvidia-compute-460:amd64                   460.39-0ubuntu0.20.04.1                     amd64        NVIDIA libcompute package
ii  libnvidia-compute-460:i386                    460.39-0ubuntu0.20.04.1                     i386         NVIDIA libcompute package
ii  libnvidia-decode-460:amd64                    460.39-0ubuntu0.20.04.1                     amd64        NVIDIA Video Decoding runtime libraries
ii  libnvidia-decode-460:i386                     460.39-0ubuntu0.20.04.1                     i386         NVIDIA Video Decoding runtime libraries
ii  libnvidia-encode-460:amd64                    460.39-0ubuntu0.20.04.1                     amd64        NVENC Video Encoding runtime library
ii  libnvidia-encode-460:i386                     460.39-0ubuntu0.20.04.1                     i386         NVENC Video Encoding runtime library
ii  libnvidia-extra-460:amd64                     460.39-0ubuntu0.20.04.1                     amd64        Extra libraries for the NVIDIA driver
ii  libnvidia-fbc1-460:amd64                      460.39-0ubuntu0.20.04.1                     amd64        NVIDIA OpenGL-based Framebuffer Capture runtime library
ii  libnvidia-fbc1-460:i386                       460.39-0ubuntu0.20.04.1                     i386         NVIDIA OpenGL-based Framebuffer Capture runtime library
ii  libnvidia-gl-460:amd64                        460.39-0ubuntu0.20.04.1                     amd64        NVIDIA OpenGL/GLX/EGL/GLES GLVND libraries and Vulkan ICD
ii  libnvidia-gl-460:i386                         460.39-0ubuntu0.20.04.1                     i386         NVIDIA OpenGL/GLX/EGL/GLES GLVND libraries and Vulkan ICD
ii  libnvidia-ifr1-460:amd64                      460.39-0ubuntu0.20.04.1                     amd64        NVIDIA OpenGL-based Inband Frame Readback runtime library
ii  libnvidia-ifr1-460:i386                       460.39-0ubuntu0.20.04.1                     i386         NVIDIA OpenGL-based Inband Frame Readback runtime library
ii  nvidia-compute-utils-460                      460.39-0ubuntu0.20.04.1                     amd64        NVIDIA compute utilities
ii  nvidia-dkms-460                               460.39-0ubuntu0.20.04.1                     amd64        NVIDIA DKMS package
ii  nvidia-driver-460                             460.39-0ubuntu0.20.04.1                     amd64        NVIDIA driver metapackage
ii  nvidia-kernel-common-460                      460.39-0ubuntu0.20.04.1                     amd64        Shared files used with the kernel module
ii  nvidia-kernel-source-460                      460.39-0ubuntu0.20.04.1                     amd64        NVIDIA kernel source package
ii  nvidia-prime                                  0.8.16~0.20.04.1                            all          Tools to enable NVIDIA's Prime
ii  nvidia-settings                               460.39-0ubuntu0.20.04.1                     amd64        Tool for configuring the NVIDIA graphics driver
ii  nvidia-utils-460                              460.39-0ubuntu0.20.04.1                     amd64        NVIDIA driver support binaries
ii  screen-resolution-extra                       0.18build1                                  all          Extension for the nvidia-settings control panel
ii  xserver-xorg-video-nvidia-460                 460.39-0ubuntu0.20.04.1                     amd64        NVIDIA binary Xorg driver

dpkg -l | grep -v ^ii | grep -v ^rc

Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                           Version                                     Architecture Description
+++-=============================================-===========================================-============-======================================================================================================

Merci à vous!

xubu1957 · Le 15/03/2021, à 07:47

Bonjour,

Fournis les noyaux présents :

echo; dpkg -l | awk '!/^rc/ && / linux-(c|g|h|i|lo|m|si|t)/{print $1,$2,$3,$4 | "sort -k3V | column -t"}' ; echo -e "\nNoyau courant : $(uname -mr)"

jerm · Le 15/03/2021, à 08:12

Voilà pour les noyaux!

ii  linux-hwe-5.8-headers-5.8.0-43        5.8.0-43.49~20.04.1   all
ii  linux-headers-5.8.0-43-generic        5.8.0-43.49~20.04.1   amd64
ii  linux-image-5.8.0-43-generic          5.8.0-43.49~20.04.1   amd64
ii  linux-modules-5.8.0-43-generic        5.8.0-43.49~20.04.1   amd64
ii  linux-modules-extra-5.8.0-43-generic  5.8.0-43.49~20.04.1   amd64
ii  linux-hwe-5.8-headers-5.8.0-44        5.8.0-44.50~20.04.1   all
ii  linux-headers-5.8.0-44-generic        5.8.0-44.50~20.04.1   amd64
ii  linux-image-5.8.0-44-generic          5.8.0-44.50~20.04.1   amd64
ii  linux-modules-5.8.0-44-generic        5.8.0-44.50~20.04.1   amd64
ii  linux-modules-extra-5.8.0-44-generic  5.8.0-44.50~20.04.1   amd64
ii  linux-generic-hwe-20.04               5.8.0.44.50~20.04.30  amd64
ii  linux-headers-generic-hwe-20.04       5.8.0.44.50~20.04.30  amd64
ii  linux-image-generic-hwe-20.04         5.8.0.44.50~20.04.30  amd64

Noyau courant : 5.8.0-44-generic x86_64

Merci (même si là, vous êtes un peu en train de me perdre, j'avoue! ;-) )

xubu1957 · Le 15/03/2021, à 08:19

Montre aussi :

xrandr

jerm · Le 15/03/2021, à 08:48

Voilà pour xrandr

Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
DVI-D-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 160mm x 90mm
   1920x1080     60.00*+  59.94    50.00    60.05    60.00    50.04  
   1680x1050     59.95  
   1600x1200     60.00  
   1440x900      74.98    59.89  
   1280x1024     75.02    60.02  
   1280x960      60.00  
   1280x800      59.81  
   1280x720      60.00    59.94    50.00  
   1152x864      75.00  
   1024x768      75.03    70.07    60.00  
   800x600       75.00    72.19    60.32    56.25  
   720x576       50.00  
   720x480       59.94  
   640x480       75.00    72.81    59.94  
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 13/03/2021, à 11:00

[RÉSOLU] NVIDIA et driver propriétaire

#2 Le 13/03/2021, à 11:33

Re : [RÉSOLU] NVIDIA et driver propriétaire

#3 Le 13/03/2021, à 11:46

Re : [RÉSOLU] NVIDIA et driver propriétaire

#4 Le 13/03/2021, à 12:14

Re : [RÉSOLU] NVIDIA et driver propriétaire

#5 Le 13/03/2021, à 13:58

Re : [RÉSOLU] NVIDIA et driver propriétaire

#6 Le 13/03/2021, à 18:50

Re : [RÉSOLU] NVIDIA et driver propriétaire

#7 Le 13/03/2021, à 20:34

Re : [RÉSOLU] NVIDIA et driver propriétaire

#8 Le 13/03/2021, à 21:34

Re : [RÉSOLU] NVIDIA et driver propriétaire

#9 Le 13/03/2021, à 21:53

Re : [RÉSOLU] NVIDIA et driver propriétaire

#10 Le 13/03/2021, à 21:59

Re : [RÉSOLU] NVIDIA et driver propriétaire

#11 Le 13/03/2021, à 22:04

Re : [RÉSOLU] NVIDIA et driver propriétaire

#12 Le 13/03/2021, à 23:59

Re : [RÉSOLU] NVIDIA et driver propriétaire

#13 Le 14/03/2021, à 15:26

Re : [RÉSOLU] NVIDIA et driver propriétaire

#14 Le 14/03/2021, à 18:15

Re : [RÉSOLU] NVIDIA et driver propriétaire

#15 Le 14/03/2021, à 21:38

Re : [RÉSOLU] NVIDIA et driver propriétaire

#16 Le 14/03/2021, à 22:29

Re : [RÉSOLU] NVIDIA et driver propriétaire

#17 Le 14/03/2021, à 23:00

Re : [RÉSOLU] NVIDIA et driver propriétaire

#18 Le 14/03/2021, à 23:21

Re : [RÉSOLU] NVIDIA et driver propriétaire

#19 Le 14/03/2021, à 23:23

Re : [RÉSOLU] NVIDIA et driver propriétaire

#20 Le 14/03/2021, à 23:25

Re : [RÉSOLU] NVIDIA et driver propriétaire

#21 Le 15/03/2021, à 07:44

Re : [RÉSOLU] NVIDIA et driver propriétaire

#22 Le 15/03/2021, à 07:47

Re : [RÉSOLU] NVIDIA et driver propriétaire

#23 Le 15/03/2021, à 08:12

Re : [RÉSOLU] NVIDIA et driver propriétaire

#24 Le 15/03/2021, à 08:19

Re : [RÉSOLU] NVIDIA et driver propriétaire

#25 Le 15/03/2021, à 08:48

Re : [RÉSOLU] NVIDIA et driver propriétaire

Pied de page des forums