Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 15/09/2022, à 11:58

Davidvincent

message d'erreur pendant l'installation [Résolu] réponse #11

Bonjour, (j'espère être au bon endroit pour ma question)

J'essaye d'installer Ubuntu sur unn Acer Aspire E 15 (i3 8GB)
à la fin de l'instalation ce message s'affiche,

x86/cpu: SGXdisabled by BIOS.
platform MSFT0101:00: failed to claimresource 1: [mem 0xfed40000-0xfed40fff]
acpi MSFT0101:00: platform device creation failed: -16

ensuite l'écran d’installation apparaît.
Le live fonctionne très bien, mais l’installation semble bien se passer mais au redémarrage rien ne se passe.
sauf Checking média
et ensuite un message m'indiquant que boot n'a pas fonctionné et me redirige vers le boot manager où je ne vois plus le HDD,
seulement la clé si je la remet.

je ne veux que linux sur le pc, donc pas de dual boot.
Je suis néophyte en Linux

Merci de m'avoir lu
David

Dernière modification par Davidvincent (Le 16/09/2022, à 00:05)

Hors ligne

#2 Le 15/09/2022, à 13:15

malbo

Re : message d'erreur pendant l'installation [Résolu] réponse #11

Bonjour,
Quelle est la version de Ubuntu que tu tentes d'installer (22.04 ou une version plus ancienne) ?

Hors ligne

#3 Le 15/09/2022, à 13:23

Davidvincent

Re : message d'erreur pendant l'installation [Résolu] réponse #11

Hola,
22.04 LTS
je pense que c'est au niveau du boot mais n'étant pas un spécialiste...
Je voulais remplacer un windows 10 devenu beaucoup trop lent

Hors ligne

#4 Le 15/09/2022, à 15:04

iznobe

Re : message d'erreur pendant l'installation [Résolu] réponse #11

Bonjour , ces messages :

x86/cpu: SGXdisabled by BIOS.
platform MSFT0101:00: failed to claimresource 1: [mem 0xfed40000-0xfed40fff]
acpi MSFT0101:00: platform device creation failed: -16

sont sans importance et n' impacte pas le systeme ni le demarrage .

Avec la clé et choix essayer au demarrage , peux tu donner ce retour stp :

lsblk -fe7
sudo mount /dev/sda2 /mnt
cat /mnt/etc/fstab

ci dessous le 1er message de la discussion du lien indique comment poster un retour corretement si besoin .

Dernière modification par iznobe (Le 15/09/2022, à 17:44)


retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .

Hors ligne

#5 Le 15/09/2022, à 15:04

malbo

Re : message d'erreur pendant l'installation [Résolu] réponse #11

Je te prie de démarrer sur ta LiveUSB Ubuntu 22.04 avec le choix "Essayer Ubuntu" afin d'ouvrir une session live. Depuis cette session live, fais un Boot-info et donne l'URL de ce Boot-info dans ta réponse.
D'autre part, pour qu'on puisse vérifier certains éléments, je te prie de faire ce que j'explique dans ce post, toujours en session live : https://forum.ubuntu-fr.org/viewtopic.p … #p22447655

Hors ligne

#6 Le 15/09/2022, à 17:39

Davidvincent

Re : message d'erreur pendant l'installation [Résolu] réponse #11

iznobe a écrit :

Bonjour , ces messages :

x86/cpu: SGXdisabled by BIOS.
platform MSFT0101:00: failed to claimresource 1: [mem 0xfed40000-0xfed40fff]
acpi MSFT0101:00: platform device creation failed: -16

sont sans importance et n' impacte pas le systeme ni le demarrage .

Avec la clé et choix essayer au demarrage , peux tu donner ce retour stp :

lsblk -fe7
sudo mount /dev/sda /mnt
cat /mnt/etc/fstab

ci dessous le 1er message de la discussion du lien indique comment poster un retour corretement si besoin .

1)
~$

lsblk -fe7
NAME FSTYPE FSVER LABEL UUID                                 FSAVAIL FSUSE% MOUNTPOINTS
sda                                                                         
├─sda1
│    vfat   FAT32       A96C-A466                                           
├─sda2
│    ext4   1.0         fdd0fc60-1d1b-43ad-97cc-f1b54961cddd                
└─sda3
     ext4   1.0         940b640b-9c67-4dd3-80fc-8559cf490ef1                
sdb                                                                         
└─sdb1
     vfat   FAT32 UBUNTU 22_0
                        42BA-750B                              26,1G    12% /cdrom
sr0                    

2)

sudo mount /dev/sda /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sda, missing codepage or helper program, or other error.

3)

cat /mnt/etc/fstab
cat: /mnt/etc/fstab: Aucun fichier ou dossier de ce type

Voilà

Hors ligne

#7 Le 15/09/2022, à 17:44

iznobe

Re : message d'erreur pendant l'installation [Résolu] réponse #11

sudo mount /dev/sda2 /mnt
cat /mnt/etc/fstab

erreur de ma part , correction apportée .

tu devrais fournir le boot-info demandé par @malbo . cela donne un rapport complet et détaillé qui permet de tout voir d ' un coup wink

Dernière modification par iznobe (Le 15/09/2022, à 17:46)


retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .

Hors ligne

#8 Le 15/09/2022, à 17:54

Davidvincent

Re : message d'erreur pendant l'installation [Résolu] réponse #11

malbo a écrit :

Je te prie de démarrer sur ta LiveUSB Ubuntu 22.04 avec le choix "Essayer Ubuntu" afin d'ouvrir une session live. Depuis cette session live, fais un Boot-info et donne l'URL de ce Boot-info dans ta réponse.
D'autre part, pour qu'on puisse vérifier certains éléments, je te prie de faire ce que j'explique dans ce post, toujours en session live : https://forum.ubuntu-fr.org/viewtopic.p … #p22447655

Bonjour,

Voici le boot-info
https://paste.ubuntu.com/p/MysXg2VWFT/

Hors ligne

#9 Le 15/09/2022, à 18:07

Davidvincent

Re : message d'erreur pendant l'installation [Résolu] réponse #11

voilà

gedit lshw.txt
computer
    description: Ordinateur Bloc-notes
    produit: Aspire E5-575 (Aspire E5-575_1094_1.25)
    fabricant: Acer
    version: V1.25
    numéro de série: [REMOVED]
    bits: 64 bits
    fonctionnalités: smbios-3.0.0 dmi-3.0.0 smp vsyscall32
    configuration : chassis=notebook family=SKL sku=Aspire E5-575_1094_1.25 uuid=[REMOVED]
  *-core
       description: Carte mère
       produit: Ironman_SK
       fabricant: Acer
       identifiant matériel: 0
       version: V1.25
       numéro de série: [REMOVED]
       emplacement: Type2 - Board Chassis Location
     *-firmware
          description: BIOS
          fabricant: Insyde Corp.
          identifiant matériel: 0
          version: V1.25
          date: 03/03/2017
          taille: 128KiB
          capacité: 4608KiB
          fonctionnalités: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification uefi
     *-cpu
          description: CPU
          produit: Intel(R) Core(TM) i3-6006U CPU @ 2.00GHz
          fabricant: Intel Corp.
          identifiant matériel: 4
          information bus: cpu@0
          version: 6.78.3
          numéro de série: [REMOVED]
          emplacement: U3E1
          taille: 1999MHz
          capacité: 4005MHz
          bits: 64 bits
          horloge: 100MHz
          fonctionnalités: lm fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp x86-64 constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm arat pln pts hwp hwp_notify hwp_act_window hwp_epp md_clear flush_l1d arch_capabilities cpufreq
          configuration : cores=2 enabledcores=2 microcode=240 threads=4
        *-cache:0
             description: L1 cache
             identifiant matériel: 6
             emplacement: L1 Cache
             taille: 64KiB
             capacité: 64KiB
             fonctionnalités: synchronous internal write-back instruction
             configuration : level=1
        *-cache:1
             description: L2 cache
             identifiant matériel: 7
             emplacement: L2 Cache
             taille: 512KiB
             capacité: 512KiB
             fonctionnalités: synchronous internal write-back unified
             configuration : level=2
        *-cache:2
             description: L3 cache
             identifiant matériel: 8
             emplacement: L3 Cache
             taille: 3MiB
             capacité: 3MiB
             fonctionnalités: synchronous internal write-back unified
             configuration : level=3
     *-cache
          description: L1 cache
          identifiant matériel: 5
          emplacement: L1 Cache
          taille: 64KiB
          capacité: 64KiB
          fonctionnalités: synchronous internal write-back data
          configuration : level=1
     *-memory
          description: Mémoire Système
          identifiant matériel: f
          emplacement: Carte mère
          taille: 8GiB
        *-bank:0
             description: SODIMM DDR4 Synchrone 2133 MHz (0,5 ns)
             produit: HMA451S6AFR8N-TF
             fabricant: SK Hynix
             identifiant matériel: 0
             numéro de série: [REMOVED]
             emplacement: ChannelA-DIMM0
             taille: 4GiB
             bits: 64 bits
             horloge: 2133MHz (0.5ns)
        *-bank:1
             description: Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2022-04-01 21:15+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2022-07-21 13:07+0000X-Generator: Launchpad (build 025a39fd866a641b6ae33074cda0d02a2c712d38)Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2022-04-01 21:15+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2022-07-21 13:07+0000X-Generator: Launchpad (build 025a39fd866a641b6ae33074cda0d02a2c712d38) [vide]
             identifiant matériel: 1
             emplacement: ChannelA-DIMM1
        *-bank:2
             description: SODIMM DDR4 Synchrone 2133 MHz (0,5 ns)
             produit: HMA451S6AFR8N-TF
             fabricant: SK Hynix
             identifiant matériel: 2
             numéro de série: [REMOVED]
             emplacement: ChannelB-DIMM0
             taille: 4GiB
             bits: 64 bits
             horloge: 2133MHz (0.5ns)
        *-bank:3
             description: Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2022-04-01 21:15+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2022-07-21 13:07+0000X-Generator: Launchpad (build 025a39fd866a641b6ae33074cda0d02a2c712d38)Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2022-04-01 21:15+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2022-07-21 13:07+0000X-Generator: Launchpad (build 025a39fd866a641b6ae33074cda0d02a2c712d38) [vide]
             identifiant matériel: 3
             emplacement: ChannelB-DIMM1
     *-pci
          description: Host bridge
          produit: Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers
          fabricant: Intel Corporation
          identifiant matériel: 100
          information bus: pci@0000:00:00.0
          version: 08
          bits: 32 bits
          horloge: 33MHz
          configuration : driver=skl_uncore
          ressources : irq:0
        *-display
             description: VGA compatible controller
             produit: Skylake GT2 [HD Graphics 520]
             fabricant: Intel Corporation
             identifiant matériel: 2
             information bus: pci@0000:00:02.0
             nom logique: /dev/fb0
             version: 07
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pciexpress msi pm vga_controller bus_master cap_list rom fb
             configuration : depth=32 driver=i915 latency=0 resolution=1366,768
             ressources : irq:129 mémoire:c0000000-c0ffffff mémoire:b0000000-bfffffff portE/S:4000(taille=64) mémoire:c0000-dffff
        *-usb
             description: USB controller
             produit: Sunrise Point-LP USB 3.0 xHCI Controller
             fabricant: Intel Corporation
             identifiant matériel: 14
             information bus: pci@0000:00:14.0
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi xhci bus_master cap_list
             configuration : driver=xhci_hcd latency=0
             ressources : irq:126 mémoire:c1300000-c130ffff
           *-usbhost:0
                produit: xHCI Host Controller
                fabricant: Linux 5.15.0-43-generic xhci-hcd
                identifiant matériel: 0
                information bus: usb@1
                nom logique: usb1
                version: 5.15
                fonctionnalités: usb-2.00
                configuration : driver=hub slots=12 speed=480Mbit/s
              *-usb:0
                   description: Souris
                   produit: Trust Wireless Mouse
                   fabricant: Trust
                   identifiant matériel: 1
                   information bus: usb@1:1
                   nom logique: input7
                   nom logique: /dev/input/event7
                   nom logique: input8
                   nom logique: /dev/input/event8
                   nom logique: /dev/input/mouse2
                   version: 2.00
                   fonctionnalités: usb-1.10 usb
                   configuration : driver=usbhid maxpower=100mA speed=12Mbit/s
              *-usb:1
                   description: Périphérique de stockage de masse
                   produit: Mass Storage
                   fabricant: Generic
                   identifiant matériel: 4
                   information bus: usb@1:4
                   nom logique: scsi2
                   version: 1.00
                   numéro de série: [REMOVED]
                   fonctionnalités: usb-2.00 scsi emulated scsi-host
                   configuration : driver=usb-storage maxpower=200mA speed=480Mbit/s
                 *-disk
                      description: SCSI Disk
                      produit: Flash Disk
                      fabricant: Generic
                      identifiant matériel: 0.0.0
                      information bus: scsi@2:0.0.0
                      nom logique: /dev/sdb
                      version: 8.07
                      numéro de série: [REMOVED]
                      taille: 29GiB (31GB)
                      fonctionnalités: removable
                      configuration : ansiversion=4 logicalsectorsize=512 sectorsize=512
                    *-medium
                         identifiant matériel: 0
                         nom logique: /dev/sdb
                         taille: 29GiB (31GB)
                         fonctionnalités: partitioned partitioned:dos
                         configuration : signature=142d3891
                       *-volume
                            description: Windows FAT volume
                            fabricant: MSWIN4.1
                            identifiant matériel: 1
                            nom logique: /dev/sdb1
                            nom logique: /cdrom
                            version: FAT32
                            numéro de série: [REMOVED]
                            taille: 29GiB
                            capacité: 29GiB
                            fonctionnalités: primary bootable fat initialized
                            configuration : FATs=2 filesystem=fat label=UBUNTU 22_0 mount.fstype=vfat mount.options=ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro state=mounted
              *-usb:2
                   description: Interface sans fil Bluetooth
                   produit: Qualcomm Atheros QCA9377 Bluetooth
                   fabricant: Lite-On Technology Corp.
                   identifiant matériel: 5
                   information bus: usb@1:5
                   version: 0.01
                   fonctionnalités: bluetooth usb-2.01
                   configuration : driver=btusb maxpower=100mA speed=12Mbit/s
              *-usb:3
                   description: Vidéo
                   produit: HD WebCam: HD WebCam
                   fabricant: Chicony Electronics Co.,Ltd.
                   identifiant matériel: 7
                   information bus: usb@1:7
                   nom logique: input19
                   nom logique: /dev/input/event17
                   version: 92.01
                   fonctionnalités: usb-2.00 usb
                   configuration : driver=uvcvideo maxpower=500mA speed=480Mbit/s
           *-usbhost:1
                produit: xHCI Host Controller
                fabricant: Linux 5.15.0-43-generic xhci-hcd
                identifiant matériel: 1
                information bus: usb@2
                nom logique: usb2
                version: 5.15
                fonctionnalités: usb-3.00
                configuration : driver=hub slots=6 speed=5000Mbit/s
        *-generic:0
             description: Signal processing controller
             produit: Sunrise Point-LP Thermal subsystem
             fabricant: Intel Corporation
             identifiant matériel: 14.2
             information bus: pci@0000:00:14.2
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi bus_master cap_list
             configuration : driver=intel_pch_thermal latency=0
             ressources : irq:18 mémoire:c132a000-c132afff
        *-generic:1
             description: Signal processing controller
             produit: Sunrise Point-LP Serial IO I2C Controller #0
             fabricant: Intel Corporation
             identifiant matériel: 15
             information bus: pci@0000:00:15.0
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm bus_master cap_list
             configuration : driver=intel-lpss latency=0
             ressources : irq:16 mémoire:c132b000-c132bfff
        *-communication
             description: Communication controller
             produit: Sunrise Point-LP CSME HECI #1
             fabricant: Intel Corporation
             identifiant matériel: 16
             information bus: pci@0000:00:16.0
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi bus_master cap_list
             configuration : driver=mei_me latency=0
             ressources : irq:130 mémoire:c132c000-c132cfff
        *-sata
             description: SATA controller
             produit: Sunrise Point-LP SATA Controller [AHCI mode]
             fabricant: Intel Corporation
             identifiant matériel: 17
             information bus: pci@0000:00:17.0
             nom logique: scsi0
             nom logique: scsi1
             version: 21
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: sata msi pm ahci_1.0 bus_master cap_list emulated
             configuration : driver=ahci latency=0
             ressources : irq:125 mémoire:c1328000-c1329fff mémoire:c132f000-c132f0ff portE/S:4080(taille=8) portE/S:4088(taille=4) portE/S:4060(taille=32) mémoire:c132d000-c132d7ff
           *-disk
                description: ATA Disk
                produit: ST1000LM035-1RK1
                identifiant matériel: 0
                information bus: scsi@0:0.0.0
                nom logique: /dev/sda
                version: ACM1
                numéro de série: [REMOVED]
                taille: 931GiB (1TB)
                fonctionnalités: gpt-1.00 partitioned partitioned:gpt
                configuration : ansiversion=5 guid=d48b0382-e6f7-4a88-912c-4b8928f0aad6 logicalsectorsize=512 sectorsize=4096
              *-volume:0
                   description: Windows FAT volume
                   fabricant: mkfs.fat
                   identifiant matériel: 1
                   information bus: scsi@0:0.0.0,1
                   nom logique: /dev/sda1
                   version: FAT32
                   numéro de série: [REMOVED]
                   taille: 510MiB
                   capacité: 511MiB
                   fonctionnalités: boot fat initialized
                   configuration : FATs=2 filesystem=fat name=EFI System Partition
              *-volume:1
                   description: Volume EXT4
                   fabricant: Linux
                   identifiant matériel: 2
                   information bus: scsi@0:0.0.0,2
                   nom logique: /dev/sda2
                   version: 1.0
                   numéro de série: [REMOVED]
                   taille: 474GiB
                   capacité: 474GiB
                   fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink 64bit extents ext4 ext2 initialized
                   configuration : created=2022-09-15 05:45:50 filesystem=ext4 lastmountpoint=/mnt/boot-sav/sda2 modified=2022-09-15 15:43:17 mounted=2022-09-15 15:42:33 state=clean
              *-volume:2
                   description: Volume EXT4
                   fabricant: Linux
                   identifiant matériel: 3
                   information bus: scsi@0:0.0.0,3
                   nom logique: /dev/sda3
                   version: 1.0
                   numéro de série: [REMOVED]
                   taille: 456GiB
                   fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink 64bit extents ext4 ext2 initialized
                   configuration : created=2022-09-15 06:32:58 filesystem=ext4 lastmountpoint=/mnt/boot-sav/sda3 modified=2022-09-15 15:43:18 mounted=2022-09-15 15:42:34 state=clean
           *-cdrom
                description: DVD-RAM writer
                produit: DVD A  DA8AESH
                fabricant: Slimtype
                identifiant matériel: 1
                information bus: scsi@1:0.0.0
                nom logique: /dev/cdrom
                nom logique: /dev/sr0
                version: XA11
                fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
                configuration : ansiversion=5 status=nodisc
        *-pci:0
             description: PCI bridge
             produit: Sunrise Point-LP PCI Express Root Port #9
             fabricant: Intel Corporation
             identifiant matériel: 1d
             information bus: pci@0000:00:1d.0
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration : driver=pcieport
             ressources : irq:122 portE/S:5000(taille=4096) mémoire:ad900000-adafffff portE/S:adb00000(taille=2097152)
        *-pci:1
             description: PCI bridge
             produit: Sunrise Point-LP PCI Express Root Port #11
             fabricant: Intel Corporation
             identifiant matériel: 1d.2
             information bus: pci@0000:00:1d.2
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration : driver=pcieport
             ressources : irq:123 mémoire:c1000000-c11fffff
           *-network
                description: Interface réseau sans fil
                produit: QCA9377 802.11ac Wireless Network Adapter
                fabricant: Qualcomm Atheros
                identifiant matériel: 0
                information bus: pci@0000:02:00.0
                nom logique: wlp2s0
                version: 31
                numéro de série: [REMOVED]
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
                configuration : broadcast=yes driver=ath10k_pci driverversion=5.15.0-43-generic firmware=WLAN.TF.2.1-00021-QCARMSWP-1 ip=[REMOVED] latency=0 link=yes multicast=yes wireless=IEEE 802.11
                ressources : irq:132 mémoire:c1000000-c11fffff
        *-pci:2
             description: PCI bridge
             produit: Intel Corporation
             fabricant: Intel Corporation
             identifiant matériel: 1d.3
             information bus: pci@0000:00:1d.3
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration : driver=pcieport
             ressources : irq:124 portE/S:3000(taille=4096) mémoire:c1200000-c12fffff
           *-generic
                description: MMC Host
                produit: RTL8411B PCI Express Card Reader
                fabricant: Realtek Semiconductor Co., Ltd.
                identifiant matériel: 0
                information bus: pci@0000:03:00.0
                nom logique: mmc0
                version: 01
                bits: 32 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list rom
                configuration : driver=rtsx_pci latency=0
                ressources : irq:127 mémoire:c1205000-c1205fff mémoire:c1210000-c121ffff
           *-network
                description: Ethernet interface
                produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
                fabricant: Realtek Semiconductor Co., Ltd.
                identifiant matériel: 0.1
                information bus: pci@0000:03:00.1
                nom logique: enp3s0f1
                version: 12
                numéro de série: [REMOVED]
                capacité: 1Gbit/s
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
                configuration : autonegotiation=on broadcast=yes driver=r8169 driverversion=5.15.0-43-generic firmware=rtl8411-2_0.0.1 07/08/13 latency=0 link=no multicast=yes port=twisted pair
                ressources : irq:19 portE/S:3000(taille=256) mémoire:c1204000-c1204fff mémoire:c1200000-c1203fff
        *-isa
             description: ISA bridge
             produit: Sunrise Point-LP LPC Controller
             fabricant: Intel Corporation
             identifiant matériel: 1f
             information bus: pci@0000:00:1f.0
             version: 21
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: isa bus_master
             configuration : latency=0
           *-pnp00:00
                produit: PnP device PNP0c02
                identifiant matériel: 0
                fonctionnalités: pnp
                configuration : driver=system
           *-pnp00:01
                produit: PnP device PNP0c02
                identifiant matériel: 1
                fonctionnalités: pnp
                configuration : driver=system
           *-pnp00:02
                produit: PnP device PNP0c02
                identifiant matériel: 2
                fonctionnalités: pnp
                configuration : driver=system
           *-pnp00:03
                produit: PnP device PNP0b00
                identifiant matériel: 3
                fonctionnalités: pnp
                configuration : driver=rtc_cmos
           *-pnp00:04
                produit: PnP device INT3f0d
                identifiant matériel: 4
                fonctionnalités: pnp
                configuration : driver=system
           *-pnp00:05
                produit: PnP device PNP0303
                identifiant matériel: 5
                fonctionnalités: pnp
                configuration : driver=i8042 kbd
           *-pnp00:06
                produit: PnP device PNP0c02
                identifiant matériel: 6
                fonctionnalités: pnp
                configuration : driver=system
           *-pnp00:07
                produit: PnP device PNP0c02
                identifiant matériel: 7
                fonctionnalités: pnp
                configuration : driver=system
        *-memory NON-RÉCLAMÉ
             description: Memory controller
             produit: Sunrise Point-LP PMC
             fabricant: Intel Corporation
             identifiant matériel: 1f.2
             information bus: pci@0000:00:1f.2
             version: 21
             bits: 32 bits
             horloge: 33MHz (30.3ns)
             fonctionnalités: bus_master
             configuration : latency=0
             ressources : mémoire:c1324000-c1327fff
        *-multimedia
             description: Audio device
             produit: Sunrise Point-LP HD Audio
             fabricant: Intel Corporation
             identifiant matériel: 1f.3
             information bus: pci@0000:00:1f.3
             nom logique: card0
             nom logique: /dev/snd/controlC0
             nom logique: /dev/snd/hwC0D0
             nom logique: /dev/snd/hwC0D2
             nom logique: /dev/snd/pcmC0D0c
             nom logique: /dev/snd/pcmC0D0p
             nom logique: /dev/snd/pcmC0D10p
             nom logique: /dev/snd/pcmC0D3p
             nom logique: /dev/snd/pcmC0D7p
             nom logique: /dev/snd/pcmC0D8p
             nom logique: /dev/snd/pcmC0D9p
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi bus_master cap_list
             configuration : driver=snd_hda_intel latency=32
             ressources : irq:131 mémoire:c1320000-c1323fff mémoire:c1310000-c131ffff
           *-input:0
                produit: HDA Intel PCH Front Headphone
                identifiant matériel: 0
                nom logique: input13
                nom logique: /dev/input/event11
           *-input:1
                produit: HDA Intel PCH HDMI/DP,pcm=3
                identifiant matériel: 1
                nom logique: input14
                nom logique: /dev/input/event12
           *-input:2
                produit: HDA Intel PCH HDMI/DP,pcm=7
                identifiant matériel: 2
                nom logique: input15
                nom logique: /dev/input/event13
           *-input:3
                produit: HDA Intel PCH HDMI/DP,pcm=8
                identifiant matériel: 3
                nom logique: input16
                nom logique: /dev/input/event14
           *-input:4
                produit: HDA Intel PCH HDMI/DP,pcm=9
                identifiant matériel: 4
                nom logique: input17
                nom logique: /dev/input/event15
           *-input:5
                produit: HDA Intel PCH HDMI/DP,pcm=10
                identifiant matériel: 5
                nom logique: input18
                nom logique: /dev/input/event16
        *-serial
             description: SMBus
             produit: Sunrise Point-LP SMBus
             fabricant: Intel Corporation
             identifiant matériel: 1f.4
             information bus: pci@0000:00:1f.4
             version: 21
             bits: 64 bits
             horloge: 33MHz
             configuration : driver=i801_smbus latency=0
             ressources : irq:16 mémoire:c132e000-c132e0ff portE/S:4040(taille=32)
  *-input:0
       produit: Power Button
       identifiant matériel: 1
       nom logique: input0
       nom logique: /dev/input/event0
       fonctionnalités: platform
  *-input:1
       produit: Sleep Button
       identifiant matériel: 2
       nom logique: input1
       nom logique: /dev/input/event1
       fonctionnalités: platform
  *-input:2
       produit: Acer WMI hotkeys
       identifiant matériel: 3
       nom logique: input10
       nom logique: /dev/input/event10
       fonctionnalités: platform
  *-input:3
       produit: ELAN0501:00 04F3:3019 Mouse
       identifiant matériel: 4
       nom logique: input11
       nom logique: /dev/input/event5
       nom logique: /dev/input/mouse0
       fonctionnalités: i2c
  *-input:4
       produit: ELAN0501:00 04F3:3019 Touchpad
       identifiant matériel: 5
       nom logique: input12
       nom logique: /dev/input/event6
       nom logique: /dev/input/mouse1
       fonctionnalités: i2c
  *-input:5
       produit: Lid Switch
       identifiant matériel: 6
       nom logique: input2
       nom logique: /dev/input/event2
       fonctionnalités: platform
  *-input:6
       produit: Power Button
       identifiant matériel: 7
       nom logique: input3
       nom logique: /dev/input/event3
       fonctionnalités: platform
  *-input:7
       produit: AT Translated Set 2 keyboard
       identifiant matériel: 8
       nom logique: input4
       nom logique: /dev/input/event4
       nom logique: input4::capslock
       nom logique: input4::numlock
       nom logique: input4::scrolllock
       fonctionnalités: i8042
  *-input:8
       produit: Video Bus
       identifiant matériel: 9
       nom logique: input9
       nom logique: /dev/input/event9
       fonctionnalités: platform

Hors ligne

#10 Le 15/09/2022, à 18:15

xubu1957

Re : message d'erreur pendant l'installation [Résolu] réponse #11

Bonjour,

Collage du Boot-info, pour les spécialistes :

boot-info-4ppa200                                              [20220915_1542]

============================== Boot Info Summary ===============================

 => No boot loader is installed in the MBR of /dev/sda.
 => Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (hd0,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    biosdisk fshelp fat exfat ext2 ntfs ntfscomp part_msdos
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /efi/BOOT/fbx64.efi /efi/BOOT/mmx64.efi 
                       /efi/ubuntu/grubx64.efi /efi/ubuntu/mmx64.efi 
                       /efi/ubuntu/shimx64.efi /efi/ubuntu/grub.cfg

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 22.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub

sda3: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 22.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  MSWIN4.1: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /efi/boot/bootx64.efi 
                       /efi/boot/grubx64.efi /efi/boot/mmx64.efi


================================ 2 OS detected =================================

OS#1:   Ubuntu 22.04.1 LTS on sda2
OS#2:   Ubuntu 22.04.1 LTS on sda3

================================ Host/Hardware =================================

CPU architecture: 64-bit
Video: Skylake GT2 [HD Graphics 520] from Intel Corporation
Live-session OS is Ubuntu 64-bit (Ubuntu 22.04.1 LTS, jammy, x86_64)

===================================== UEFI =====================================

BIOS/UEFI firmware: V1.25(0.0) from Insyde Corp.
The firmware is EFI-compatible, and is set in EFI-mode for this live-session.
SecureBoot enabled but mokutil says: SecureBoot enabled - Veuillez indiquer ce message à boot.repair@gmail.com.
BootCurrent: 0002
Timeout: 0 seconds
BootOrder: 0002,2003,2001,2002
Boot0000* ubuntu	HD(1,GPT,b73a427c-2702-4130-ae23-54190b4f558b,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)
Boot0001* Unknown Device: 	HD(1,GPT,b73a427c-2702-4130-ae23-54190b4f558b,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)RC
Boot0002* Linpus lite	HD(1,MBR,0x142d3891,0x800,0x3b5f800)/File(\EFI\Boot\grubx64.efi)RC
Boot0003* Network Boot-IPV4: A8-1E-84-80-4E-6F	PciRoot(0x0)/Pci(0x1d,0x3)/Pci(0x0,0x1)/MAC(a81e84804e6f,0)/IPv4(0.0.0.00.0.0.0,0,0)RC
Boot0004* Network Boot-IPV6: A8-1E-84-80-4E-6F	PciRoot(0x0)/Pci(0x1d,0x3)/Pci(0x0,0x1)/MAC(a81e84804e6f,0)/IPv6([::]:<->[::]:,0,0)RC
Boot0005* Unknown Device: 	HD(1,GPT,c3d1aabd-0084-45e1-97ac-09669bdc6873,0x800,0x32000)/File(\EFI\ubuntu\shimx64.efi)RC
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

c152ec201c37b6e97bbc2207e49d1271   sda1/BOOT/fbx64.efi
fdafb5eece6caeccb788c946a28e6872   sda1/BOOT/mmx64.efi
f62c28d9b477b6a1a7b1c991b2b6637d   sda1/ubuntu/grubx64.efi
fdafb5eece6caeccb788c946a28e6872   sda1/ubuntu/mmx64.efi
728124f6ec8e22fbdbe7034812c81b95   sda1/ubuntu/shimx64.efi
728124f6ec8e22fbdbe7034812c81b95   sda1/BOOT/BOOTX64.efi

============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sda	: is-GPT,	no-BIOSboot,	has---ESP, 	not-usb,	not-mmc, has-os,	no-wind,	2048 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sda1	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far
sda2	: is-os,	64, apt-get,	signed grub-pc grub-efi ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sda3	: is-os,	64, apt-get,	signed grub-pc grub-efi ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios

Partitions info (2/3): _________________________________________________________

sda1	: is---ESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda2	: isnotESP,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda3	: isnotESP,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot

Partitions info (3/3): _________________________________________________________

sda1	: not--sepboot,	no---boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	no--grub.d,	sda
sda2	: not--sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda
sda3	: not--sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda

fdisk -l (filtered): ___________________________________________________________

Disk sda: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: D48B0382-E6F7-4A88-912C-4B8928F0AAD6
          Start        End   Sectors   Size Type
sda1       2048    1050623   1048576   512M EFI System
sda2    1050624  995208418 994157795 474.1G Linux filesystem
sda3  995209216 1953523711 958314496   457G Linux filesystem
Disk sdb: 29.69 GiB, 31876710400 bytes, 62259200 sectors
Disk identifier: 0x142d3891
      Boot Start      End  Sectors  Size Id Type
sdb1  *     2048 62259199 62257152 29.7G  c W95 FAT32 (LBA)

parted -lm (filtered): _________________________________________________________

sda:1000GB:scsi:512:4096:gpt:ATA ST1000LM035-1RK1:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:510GB:509GB:ext4::;
3:510GB:1000GB:491GB:ext4::;
sdb:31.9GB:scsi:512:512:msdos:Generic Flash Disk:;
1:1049kB:31.9GB:31.9GB:fat32::boot, lba;

blkid (filtered): ______________________________________________________________

NAME   FSTYPE   UUID                                 PARTUUID                             LABEL       PARTLABEL
sda                                                                                                   
├─sda1 vfat     A96C-A466                            b73a427c-2702-4130-ae23-54190b4f558b             EFI System Partition
├─sda2 ext4     fdd0fc60-1d1b-43ad-97cc-f1b54961cddd facb21e2-2ecd-4055-a161-04d062136344             
└─sda3 ext4     940b640b-9c67-4dd3-80fc-8559cf490ef1 bcb6396b-f642-41f0-b124-e988cbb730bb             
sdb                                                                                                   
└─sdb1 vfat     42BA-750B                            142d3891-01                          UBUNTU 22_0 

Mount points (filtered): _______________________________________________________

                        Avail Use% Mounted on
/dev/sda1              505.7M   1% /mnt/boot-sav/sda1
/dev/sda2              433.3G   2% /mnt/boot-sav/sda2
/dev/sda3              417.3G   2% /mnt/boot-sav/sda3
/dev/sdb1               26.1G  12% /cdrom

Mount options (filtered): ______________________________________________________

/dev/sda1              vfat            rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
/dev/sda2              ext4            rw,relatime
/dev/sda3              ext4            rw,relatime
/dev/sdb1              vfat            ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro

===================== sda1/efi/ubuntu/grub.cfg (filtered) ======================

search.fs_uuid 940b640b-9c67-4dd3-80fc-8559cf490ef1 root hd0,gpt3 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg

====================== sda2/boot/grub/grub.cfg (filtered) ======================

Ubuntu   fdd0fc60-1d1b-43ad-97cc-f1b54961cddd
Ubuntu, with Linux 5.15.0-43-generic   fdd0fc60-1d1b-43ad-97cc-f1b54961cddd
### END /etc/grub.d/30_os-prober ###
UEFI Firmware Settings   uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###

========================== sda2/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=fdd0fc60-1d1b-43ad-97cc-f1b54961cddd /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=A96C-A466  /boot/efi       vfat    umask=0077      0       1
/swapfile                                 none            swap    sw              0       0

======================= sda2/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sda2: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 340,634845734 = 365,753880576  boot/grub/grub.cfg                             1
   5,977535248 = 6,418329600    boot/vmlinuz                                   2
   5,977535248 = 6,418329600    boot/vmlinuz-5.15.0-43-generic                 2
   7,129356384 = 7,655088128    boot/initrd.img                                1
   7,129356384 = 7,655088128    boot/initrd.img-5.15.0-43-generic              1
   7,129356384 = 7,655088128    boot/initrd.img.old                            1

===================== sda2: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 18683 Apr 15 21:50 10_linux
-rwxr-xr-x 1 root root 43031 Apr 15 21:50 10_linux_zfs
-rwxr-xr-x 1 root root 14180 Apr 15 21:50 20_linux_xen
-rwxr-xr-x 1 root root 13369 Apr 15 21:50 30_os-prober
-rwxr-xr-x 1 root root  1372 Apr 15 21:50 30_uefi-firmware
-rwxr-xr-x 1 root root   700 Feb 19  2022 35_fwupd
-rwxr-xr-x 1 root root   214 Apr 15 21:50 40_custom
-rwxr-xr-x 1 root root   215 Apr 15 21:50 41_custom

=========================== sda2/etc/grub.d/35_fwupd ===========================

#! /bin/sh
# SPDX-License-Identifier: LGPL-2.1+
set -e
[ -d ${pkgdatadir:?} ]
# shellcheck source=/dev/null
. "$pkgdatadir/grub-mkconfig_lib"
if [ -f /var/lib/fwupd/uefi_capsule.conf ] &&
   ls /sys/firmware/efi/efivars/fwupd-*-0abba7dc-e516-4167-bbf5-4d9d1c739416 1>/dev/null 2>&1; then
      . /var/lib/fwupd/uefi_capsule.conf
      if [ "${EFI_PATH}" != "" ] && [ "${ESP}" != "" ]; then
      echo "Adding Linux Firmware Updater entry" >&2
cat << EOF
menuentry 'Linux Firmware Updater' \$menuentry_id_option 'fwupd' {
EOF
      ${grub_probe:?}
      prepare_grub_to_access_device '`${grub_probe} --target=device \${ESP}` | sed -e "s/^/\t/"'
cat << EOF
	chainloader ${EFI_PATH}
}
EOF
      fi
fi

====================== sda3/boot/grub/grub.cfg (filtered) ======================

Ubuntu   940b640b-9c67-4dd3-80fc-8559cf490ef1
Ubuntu, with Linux 5.15.0-43-generic   940b640b-9c67-4dd3-80fc-8559cf490ef1
Ubuntu 22.04.1 LTS (22.04) (on sda2)   fdd0fc60-1d1b-43ad-97cc-f1b54961cddd
Ubuntu (on sda2)   fdd0fc60-1d1b-43ad-97cc-f1b54961cddd
Ubuntu, with Linux 5.15.0-43-generic (on sda2)   fdd0fc60-1d1b-43ad-97cc-f1b54961cddd
### END /etc/grub.d/30_os-prober ###
UEFI Firmware Settings   uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###

========================== sda3/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda3 during installation
UUID=940b640b-9c67-4dd3-80fc-8559cf490ef1 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=A96C-A466  /boot/efi       vfat    umask=0077      0       1
/swapfile                                 none            swap    sw              0       0

======================= sda3/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sda3: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 807,052104950 = 866,565599232  boot/grub/grub.cfg                             1
 807,404293060 = 866,943758336  boot/vmlinuz                                   2
 807,404293060 = 866,943758336  boot/vmlinuz-5.15.0-43-generic                 2
 808,431114197 = 868,046299136  boot/initrd.img                                1
 808,431114197 = 868,046299136  boot/initrd.img-5.15.0-43-generic              1
 808,431114197 = 868,046299136  boot/initrd.img.old                            1

===================== sda3: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 18683 Apr 15 21:50 10_linux
-rwxr-xr-x 1 root root 43031 Apr 15 21:50 10_linux_zfs
-rwxr-xr-x 1 root root 14180 Apr 15 21:50 20_linux_xen
-rwxr-xr-x 1 root root 13369 Apr 15 21:50 30_os-prober
-rwxr-xr-x 1 root root  1372 Apr 15 21:50 30_uefi-firmware
-rwxr-xr-x 1 root root   700 Feb 19  2022 35_fwupd
-rwxr-xr-x 1 root root   214 Apr 15 21:50 40_custom
-rwxr-xr-x 1 root root   215 Apr 15 21:50 41_custom

=========================== sda3/etc/grub.d/35_fwupd ===========================

#! /bin/sh
# SPDX-License-Identifier: LGPL-2.1+
set -e
[ -d ${pkgdatadir:?} ]
# shellcheck source=/dev/null
. "$pkgdatadir/grub-mkconfig_lib"
if [ -f /var/lib/fwupd/uefi_capsule.conf ] &&
   ls /sys/firmware/efi/efivars/fwupd-*-0abba7dc-e516-4167-bbf5-4d9d1c739416 1>/dev/null 2>&1; then
      . /var/lib/fwupd/uefi_capsule.conf
      if [ "${EFI_PATH}" != "" ] && [ "${ESP}" != "" ]; then
      echo "Adding Linux Firmware Updater entry" >&2
cat << EOF
menuentry 'Linux Firmware Updater' \$menuentry_id_option 'fwupd' {
EOF
      ${grub_probe:?}
      prepare_grub_to_access_device '`${grub_probe} --target=device \${ESP}` | sed -e "s/^/\t/"'
cat << EOF
	chainloader ${EFI_PATH}
}
EOF
      fi
fi

====================== sdb1/boot/grub/grub.cfg (filtered) ======================

Try or Install Ubuntu
Ubuntu (safe graphics)
OEM install (for manufacturers)
Boot from next volume
UEFI Firmware Settings
Test memory

==================== sdb1: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
            ?? = ??             boot/grub/grub.cfg                             1



Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of
sda2,
using the following options:  sda1/boot/efi
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file

Final advice in case of suggested repair: ______________________________________

Please do not forget to make your UEFI firmware boot on the Ubuntu 22.04.1 LTS entry (sda1/efi/****/shim****.efi (**** will be updated in the final message) file) !

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#11 Le 15/09/2022, à 18:58

malbo

Re : message d'erreur pendant l'installation [Résolu] réponse #11

Il faut utiliser la méthode décrite dans ce post de fnx : https://forum.ubuntu-fr.org/viewtopic.p … #p21604079
Elle consiste à utiliser la fonctionnalité "select an uefi file as trusted" proposée dans le Bios.

Si tu fais une recherche de "Aspire E5-575" dans la Liste des portables « Acer », tu verras qu'ils ont tous été obligés d'utiliser cette fonctionnalité pour parvenir à démarrer sur Ubuntu

Dernière modification par malbo (Le 15/09/2022, à 19:01)

Hors ligne

#12 Le 15/09/2022, à 23:59

Davidvincent

Re : message d'erreur pendant l'installation [Résolu] réponse #11

Un tout grand merci vous avez assuré !!
Et bravo pour vos connaissances, compétences, réactivités, passions et gentillesses, les mots me manquent.
Je n'aurait pas trouvé sans vous, du moins pas avant l'age de la pension.
MERCI !!!

Hors ligne

#13 Le 16/09/2022, à 07:02

malbo

Re : message d'erreur pendant l'installation [Résolu] réponse #11

Bonjour,
C'est une excellente nouvelle.
Je viens d'ajouter une ligne Aspire E5-575_1094_1.25 dans la Liste des portables « Acer »
Les caractéristiques de ce modèle sont visibles dans le post #9. En bref : processeur Intel Core i3-6006U ; partie graphique HD Graphics 520 intégrée au processeur. Il n'y a pas de carte graphique dédiée.

EDIT : le Boot-info montre deux installations de Ubuntu 22.04.1 (la première a été faite sur sda2, la seconde sur sda3). As-tu déjà fait le nécessaire pour supprimer une des deux  ?

Dernière modification par malbo (Le 16/09/2022, à 07:22)

Hors ligne