Ubuntu-fr

surhimy

[Résolu] probleme bluetooth

Bonjour,

Suite à mon passage sous linux depuis un honor magicbook 14, je n'arrive plus a avoir le bluetooth que j'avais sur windows.
De plus lorsque j'essaye de réinstaller windows celui-ci ne me trouve ni le wifi, ni le bluetooth, je suis donc bloqué sans pouvoir revenir en arrière.
Pour être sur que le problème ne venait pas de la carte wifi/ bluetooth j'ai tester avec une clé bluetooth asus bt500 et là il me détecte bien la clé bluetooth mais impossible de l'activer.
Auriez-vous une solution pour régler ce problème ? Dans l’idéal j'aimerais retrouver le bluetooth d'origine sans la clé asus que j'ai ajoutée mais si cela n'est pas possible je m'en contenterai...

Merci de votre/ vos réponse(s),
Cordialement

Dernière modification par surhimy (Le 05/03/2023, à 14:49)

xubu1957

Re : [Résolu] probleme bluetooth

Bonjour,

Si tu ne trouves pas de solution dans > [Tuto] Pas de Bluetooth ? Quelques solutions

Il faudra fournir, en te servant du Retour utilisable de commande :

uname -a; lspci -nnk | grep -iA3 net; lsusb; sudo dmesg | grep -i bluetooth; sudo dmesg | grep -i firmware; lsmod | grep bluetooth

dpkg -l | grep blue

rfkill list all

et avec un terminal dont au préalable la fenêtre est élargie, afin de ne pas tronquer les lignes :

sudo service bluetooth status

Astuce pour copier / coller sans erreur :

• triple clic gauche pour sélectionner et copier une ligne entière

• clic molette pour coller dans le terminal

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

surhimy

Re : [Résolu] probleme bluetooth

Merci pour la rapidité de votre réponse
J'ai bien essayé de trouver la solution avec ce tuto il y a quelques semaines déjà, mais malheureusement rien n'y fait.

marc@marc-NMH-WCX9:~$ uname -a; lspci -nnk | grep -iA3 net; lsusb; sudo dmesg | grep -i bluetooth; sudo dmesg | grep -i firmware; lsmod | grep bluetooth
Linux marc-NMH-WCX9 5.15.0-60-generic #66~20.04.1-Ubuntu SMP Wed Jan 25 09:41:30 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux
01:00.0 Network controller [0280]: Qualcomm Device [17cb:1103] (rev 01)
	Subsystem: Foxconn International, Inc. Device [105b:e0cc]
	Kernel driver in use: ath11k_pci
	Kernel modules: ath11k_pci
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 27c6:5125 Shenzhen Goodix Technology Co.,Ltd. Goodix Fingerprint Device 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 0bda:9210 Realtek Semiconductor Corp. RTL9210
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0408:1042 Quanta Computer, Inc. HD Camera
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[    3.203648] Bluetooth: Core ver 2.22
[    3.204059] NET: Registered PF_BLUETOOTH protocol family
[    3.204063] Bluetooth: HCI device and connection manager initialized
[    3.204068] Bluetooth: HCI socket layer initialized
[    3.204070] Bluetooth: L2CAP socket layer initialized
[    3.204075] Bluetooth: SCO socket layer initialized
[    3.249468] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[    3.250438] Bluetooth: hci0: RTL: rom_version status=0 version=1
[    3.250445] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
[    3.250624] bluetooth hci0: Direct firmware load for rtl_bt/rtl8761bu_fw.bin failed with error -2
[    3.250628] Bluetooth: hci0: RTL: firmware file rtl_bt/rtl8761bu_fw.bin not found
[    4.048512] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.048519] Bluetooth: BNEP filters: protocol multicast
[    4.048524] Bluetooth: BNEP socket layer initialized
[  178.986523] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[  178.989493] Bluetooth: hci0: RTL: rom_version status=0 version=1
[  178.989499] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
[  178.989531] bluetooth hci0: Direct firmware load for rtl_bt/rtl8761bu_fw.bin failed with error -2
[  178.989534] Bluetooth: hci0: RTL: firmware file rtl_bt/rtl8761bu_fw.bin not found
[  641.737801] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[  641.739527] Bluetooth: hci0: RTL: rom_version status=0 version=1
[  641.739538] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
[  641.739613] bluetooth hci0: Direct firmware load for rtl_bt/rtl8761bu_fw.bin failed with error -2
[  641.739622] Bluetooth: hci0: RTL: firmware file rtl_bt/rtl8761bu_fw.bin not found
[    0.108212] Spectre V2 : Enabling Speculation Barrier for firmware calls
[    0.277416] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.287047] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    1.101306] [drm] Loading DMUB firmware via PSP: version=0x01010019
[    1.101422] [drm] Found VCN firmware Version ENC: 1.16 DEC: 5 VEP: 0 Revision: 3
[    1.101430] amdgpu 0000:03:00.0: amdgpu: Will use PSP to load VCN firmware
[    3.250624] bluetooth hci0: Direct firmware load for rtl_bt/rtl8761bu_fw.bin failed with error -2
[    3.250628] Bluetooth: hci0: RTL: firmware file rtl_bt/rtl8761bu_fw.bin not found
[  178.989531] bluetooth hci0: Direct firmware load for rtl_bt/rtl8761bu_fw.bin failed with error -2
[  178.989534] Bluetooth: hci0: RTL: firmware file rtl_bt/rtl8761bu_fw.bin not found
[  641.739613] bluetooth hci0: Direct firmware load for rtl_bt/rtl8761bu_fw.bin failed with error -2
[  641.739622] Bluetooth: hci0: RTL: firmware file rtl_bt/rtl8761bu_fw.bin not found
bluetooth             688128  11 btrtl,btintel,btbcm,bnep,btusb
ecdh_generic           16384  1 bluetooth

marc@marc-NMH-WCX9:~$ dpkg -l | grep blue
ii  bluez                                           5.53-0ubuntu3.6                         amd64        Bluetooth tools and daemons
ii  bluez-cups                                      5.53-0ubuntu3.6                         amd64        Bluetooth printer driver for CUPS
ii  bluez-obexd                                     5.53-0ubuntu3.6                         amd64        bluez obex daemon
ii  gir1.2-gnomebluetooth-1.0:amd64                 3.34.3-0ubuntu1                         amd64        Introspection data for GnomeBluetooth
ii  gnome-bluetooth                                 3.34.3-0ubuntu1                         amd64        GNOME Bluetooth tools
ii  libbluetooth3:amd64                             5.53-0ubuntu3.6                         amd64        Library to use the BlueZ Linux Bluetooth stack
ii  libgnome-bluetooth13:amd64                      3.34.3-0ubuntu1                         amd64        GNOME Bluetooth tools - support library
ii  pulseaudio-module-bluetooth                     1:13.99.1-1ubuntu3.13                   amd64        Bluetooth module for PulseAudio sound server

marc@marc-NMH-WCX9:~$ rfkill list all
1: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no

marc@marc-NMH-WCX9:~$ sudo service bluetooth status
● bluetooth.service - Bluetooth service
     Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)
     Active: active (running) since Sat 2023-03-04 11:54:56 CET; 30min ago
       Docs: man:bluetoothd(8)
   Main PID: 6666 (bluetoothd)
     Status: "Running"
      Tasks: 1 (limit: 8587)
     Memory: 716.0K
     CGroup: /system.slice/bluetooth.service
             └─6666 /usr/lib/bluetooth/bluetoothd

mars 04 11:54:56 marc-NMH-WCX9 systemd[1]: Starting Bluetooth service...
mars 04 11:54:56 marc-NMH-WCX9 bluetoothd[6666]: Bluetooth daemon 5.53
mars 04 11:54:56 marc-NMH-WCX9 systemd[1]: Started Bluetooth service.
mars 04 11:54:56 marc-NMH-WCX9 bluetoothd[6666]: Starting SDP server
mars 04 11:54:56 marc-NMH-WCX9 bluetoothd[6666]: Bluetooth management interface 1.21 initialized

Dans l'attente de votre retour

xubu1957

Re : [Résolu] probleme bluetooth

Tu avais récupéré le pilote Bluetooth > ♪ [SOLVED] ♫ Bluetooth USB (RTL8761) adapter ?

Et mise en place [Résolu] Dongle Bluetooth 5 - MPOW BH456A

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

surhimy

Re : [Résolu] probleme bluetooth

Alors j'ai essayé tout ça et malheureusement l'ordinateur ne me détecte même plus la clé.
Je ne comprends déjà pas pourquoi je ne peux pas activer le bluetooth interne mais alors en plus la clé....

xubu1957

Re : [Résolu] probleme bluetooth

Montre aussi d'éventuels paquets cassés :

dpkg -l | grep -v ^ii

Dernière modification par xubu1957 (Le 04/03/2023, à 17:31)

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

surhimy

Re : [Résolu] probleme bluetooth

Voici,

marc@marc-NMH-WCX9:~$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                             Version                                 Architecture Description
+++-===============================================-=======================================-============-================================================================================
rc  plexmediaserver                                 1.31.0.6654-02189b09f                   amd64        Plex organizes all of your personal media so you can easily access and enjoy it.

xubu1957

Re : [Résolu] probleme bluetooth

Regarde > fosspost.org/fix-bluetooth-rtl8761b-problem-on-linux-ubuntu-22-04

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

surhimy

Re : [Résolu] probleme bluetooth

Cela ne fonctionne toujours pas. La clé n'est pas détectée.

xubu1957

Re : [Résolu] probleme bluetooth

Montre :

sudo dmesg | grep -i usb

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

surhimy

Re : [Résolu] probleme bluetooth

Voici,

marc@marc-NMH-WCX9:~$ sudo dmesg | grep -i usb
[sudo] Mot de passe de marc :        
[    0.289351] ACPI: bus type USB registered
[    0.289351] usbcore: registered new interface driver usbfs
[    0.289351] usbcore: registered new interface driver hub
[    0.289351] usbcore: registered new device driver usb
[    0.356636] pci 0000:03:00.4: quirk_usb_early_handoff+0x0/0x6a0 took 26444 usecs
[    0.401168] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.401183] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.401194] uhci_hcd: USB Universal Host Controller Interface driver
[    0.778744] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 1
[    0.779222] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 2
[    0.779224] xhci_hcd 0000:03:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    0.779258] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    0.779260] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.779262] usb usb1: Product: xHCI Host Controller
[    0.779264] usb usb1: Manufacturer: Linux 5.15.0-60-generic xhci-hcd
[    0.779265] usb usb1: SerialNumber: 0000:03:00.3
[    0.779452] hub 1-0:1.0: USB hub found
[    0.780070] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.780084] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    0.780086] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.780087] usb usb2: Product: xHCI Host Controller
[    0.780088] usb usb2: Manufacturer: Linux 5.15.0-60-generic xhci-hcd
[    0.780098] usb usb2: SerialNumber: 0000:03:00.3
[    0.780177] hub 2-0:1.0: USB hub found
[    0.780535] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 3
[    0.780933] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 4
[    0.780935] xhci_hcd 0000:03:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[    0.780953] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    0.780955] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.780956] usb usb3: Product: xHCI Host Controller
[    0.780957] usb usb3: Manufacturer: Linux 5.15.0-60-generic xhci-hcd
[    0.780958] usb usb3: SerialNumber: 0000:03:00.4
[    0.781008] hub 3-0:1.0: USB hub found
[    0.781663] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.781677] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    0.781678] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.781679] usb usb4: Product: xHCI Host Controller
[    0.781680] usb usb4: Manufacturer: Linux 5.15.0-60-generic xhci-hcd
[    0.781681] usb usb4: SerialNumber: 0000:03:00.4
[    0.781733] hub 4-0:1.0: USB hub found
[    1.118431] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    1.350288] usb 1-2: New USB device found, idVendor=0b05, idProduct=190e, bcdDevice= 2.00
[    1.350295] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.350297] usb 1-2: Manufacturer: Realtei
[    1.350300] usb 1-2: SerialNumber: 00E04C239987
[    1.748981] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[    1.875425] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[    1.935035] usb 3-3: New USB device found, idVendor=27c6, idProduct=5125, bcdDevice= 2.00
[    1.935044] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.935048] usb 3-3: Product: Goodix Fingerprint Device 
[    1.935051] usb 3-3: Manufacturer: Shenzhen Goodix Technology Co.,Ltd.
[    1.935054] usb 3-3: SerialNumber: 00000000001A
[    2.031113] usb 1-4: New USB device found, idVendor=0408, idProduct=1042, bcdDevice= 0.03
[    2.031121] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.031124] usb 1-4: Product: HD Camera
[    2.031126] usb 1-4: Manufacturer: Quanta
[    2.031128] usb 1-4: SerialNumber: 0001
[    3.262785] usb 1-4: Found UVC 1.10 device HD Camera (0408:1042)
[    3.276459] input: HD Camera: HD Camera as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-4/1-4:1.0/input/input9
[    3.303921] usbcore: registered new interface driver uvcvideo
[    3.901743] audit: type=1400 audit(1677944346.993:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=620 comm="apparmor_parser"

xubu1957

Re : [Résolu] probleme bluetooth

Vu bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1968604,

as-tu essayé de débrancher-rebrancher le dongle ?

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

surhimy

Re : [Résolu] probleme bluetooth

Et bien pourtant oui, mais cela ne change rien, la clé n'est toujours pas détecté.
Je viens de redémarrer l'ordi au cas où ce serait ça le problème mais non rien y fait.

xubu1957

Re : [Résolu] probleme bluetooth

Je vais solliciter Nuliel.

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Nuliel

Re : [Résolu] probleme bluetooth

Hello,
Le problème est ici:

[  641.739613] bluetooth hci0: Direct firmware load for rtl_bt/rtl8761bu_fw.bin failed with error -2
[  641.739622] Bluetooth: hci0: RTL: firmware file rtl_bt/rtl8761bu_fw.bin not found

Effectivement linux-firmware n'embarque pas ce firmware pour l'instant. Il faut donc récupérer manuellement ce fichier.
D'après https://forums.linuxmint.com/viewtopic.php?t=377733 , renommer rtl8761b_fw.bin en rtl8761bu_fw.bin est suffisant:

cd /usr/lib/firmware/rtl_bt
sudo ln -s rtl8761b_fw.bin rtl8761bu_fw.bin

puis tu peux redémarrer et tester. Si ça ne fonctionne pas, tu peux redonner

uname -a; lspci -nnk | grep -iA3 net; lsusb; sudo dmesg | grep -i bluetooth; sudo dmesg | grep -i firmware; lsmod | grep bluetooth

---

[ poster un retour de commande ] [ poster une photo ]

surhimy

Re : [Résolu] probleme bluetooth

Bonsoir,
Les commandes effectuées me donnent ceci

marc@marc-NMH-WCX9:~$ cd /usr/lib/firmware/rtl_bt
marc@marc-NMH-WCX9:/usr/lib/firmware/rtl_bt$ sudo ln -s rtl8761b_fw.bin rtl8761bu_fw.bin
[sudo] Mot de passe de marc :        
ln: impossible de créer le lien symbolique 'rtl8761bu_fw.bin': Le fichier existe

Or malgré cela, après avoir redémarré aucun changement, cela ne fonctionne pas, pas de Bluetooth détecté

uname -a; lspci -nnk | grep -iA3 net; lsusb; sudo dmesg | grep -i bluetooth; sudo dmesg | grep -i firmware; lsmod | grep bluetooth
Linux marc-NMH-WCX9 5.15.0-60-generic #66~20.04.1-Ubuntu SMP Wed Jan 25 09:41:30 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux
01:00.0 Network controller [0280]: Qualcomm Device [17cb:1103] (rev 01)
	Subsystem: Foxconn International, Inc. Device [105b:e0cc]
	Kernel driver in use: ath11k_pci
	Kernel modules: ath11k_pci
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 27c6:5125 Shenzhen Goodix Technology Co.,Ltd. Goodix Fingerprint Device 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 0408:1042 Quanta Computer, Inc. HD Camera
Bus 001 Device 002: ID 1ea7:0064 SHARKOON Technologies GmbH 2.4G Mouse
Bus 001 Device 004: ID 0b05:190e ASUSTek Computer, Inc. ASUS USB-BT500
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[    0.103907] Spectre V2 : Enabling Speculation Barrier for firmware calls
[    0.272688] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.282226] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    1.038535] [drm] Loading DMUB firmware via PSP: version=0x01010019
[    1.038660] [drm] Found VCN firmware Version ENC: 1.16 DEC: 5 VEP: 0 Revision: 3
[    1.038670] amdgpu 0000:03:00.0: amdgpu: Will use PSP to load VCN firmware

Nuliel

Re : [Résolu] probleme bluetooth

Ah, tu as dû récupérer le firmware. Tu peux donner

ls -l /usr/lib/firmware/rtl_bt
file /usr/lib/firmware/rtl_bt/rtl8761bu_fw.bin

pour voir si le firmware est correctement mis

---

[ poster un retour de commande ] [ poster une photo ]

surhimy

Re : [Résolu] probleme bluetooth

Voici :

marc@marc-NMH-WCX9:~$ ls -l /usr/lib/firmware/rtl_bt
total 860
-rw-r--r-- 1 root root 38764 janv. 26 09:03 rtl8192ee_fw.bin
-rw-r--r-- 1 root root 37904 janv. 26 09:03 rtl8192eu_fw.bin
-rw-r--r-- 1 root root 24548 janv. 26 09:03 rtl8723a_fw.bin
-rw-r--r-- 1 root root 45048 janv. 26 09:03 rtl8723b_fw.bin
-rw-r--r-- 1 root root    64 janv. 26 09:03 rtl8723bs_config-OBDA8723.bin
-rw-r--r-- 1 root root 52116 janv. 26 09:03 rtl8723bs_fw.bin
-rw-r--r-- 1 root root    10 janv. 26 09:03 rtl8723d_config.bin
-rw-r--r-- 1 root root 52080 janv. 26 09:03 rtl8723d_fw.bin
-rw-r--r-- 1 root root 74488 janv. 26 09:03 rtl8761a_fw.bin
-rw-r--r-- 1 root root 74488 mars   4 16:05 rtl8761a_fw.bin-1677942321
-rw-r--r-- 1 root root    25 janv. 26 09:03 rtl8761b_config.bin
-rw-r--r-- 1 root root    25 mars   4 16:05 rtl8761b_config.bin-1677942321
-rw-r--r-- 1 root root 35644 janv. 26 09:03 rtl8761b_fw.bin
-rw-r--r-- 1 root root 35644 mars   4 16:05 rtl8761b_fw.bin-1677942321
lrwxrwxrwx 1 root root    19 mars   4 16:38 rtl8761bu_config.bin -> rtl8761b_config.bin
lrwxrwxrwx 1 root root    15 mars   4 16:38 rtl8761bu_fw.bin -> rtl8761b_fw.bin
-rw-r--r-- 1 root root 40520 janv. 26 09:03 rtl8812ae_fw.bin
lrwxrwxrwx 1 root root    19 janv. 26 09:03 rtl8821a_config.bin -> rtl8821c_config.bin
-rw-r--r-- 1 root root 37420 janv. 26 09:03 rtl8821a_fw.bin
-rw-r--r-- 1 root root    10 janv. 26 09:03 rtl8821c_config.bin
-rw-r--r-- 1 root root 51700 janv. 26 09:03 rtl8821c_fw.bin
-rw-r--r-- 1 root root    14 janv. 26 09:03 rtl8822b_config.bin
-rw-r--r-- 1 root root 51176 janv. 26 09:03 rtl8822b_fw.bin
-rw-r--r-- 1 root root    33 janv. 26 09:03 rtl8822cs_config.bin
-rw-r--r-- 1 root root 56288 janv. 26 09:03 rtl8822cs_fw.bin
-rw-r--r-- 1 root root     6 janv. 26 09:03 rtl8822cu_config.bin
-rw-r--r-- 1 root root 55296 janv. 26 09:03 rtl8822cu_fw.bin
-rw-r--r-- 1 root root     6 janv. 26 09:03 rtl8852au_config.bin
-rw-r--r-- 1 root root 53236 janv. 26 09:03 rtl8852au_fw.bin
marc@marc-NMH-WCX9:~$ file /usr/lib/firmware/rtl_bt/rtl8761bu_fw.bin
/usr/lib/firmware/rtl_bt/rtl8761bu_fw.bin: symbolic link to rtl8761b_fw.bin

Nuliel

Re : [Résolu] probleme bluetooth

Ok, impeccable pour le firmware.
Bon maintenant faut comprendre ce qu'il manque.

rfkill list all

indique t'il le bluetooth maintenant?

---

[ poster un retour de commande ] [ poster une photo ]

surhimy

Re : [Résolu] probleme bluetooth

Nan, toujours rien d'indiqué

marc@marc-NMH-WCX9:~$ rfkill list all
0: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no

Nuliel

Re : [Résolu] probleme bluetooth

Bizarre. Tu peux redémarrer et donner

sudo dmesg

---

[ poster un retour de commande ] [ poster une photo ]

surhimy

Re : [Résolu] probleme bluetooth

marc@marc-NMH-WCX9:~$ sudo dmesg
[sudo] Mot de passe de marc :        
[    0.000000] Linux version 5.15.0-60-generic (buildd@lcy02-amd64-017) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #66~20.04.1-Ubuntu SMP Wed Jan 25 09:41:30 UTC 2023 (Ubuntu 5.15.0-60.66~20.04.1-generic 5.15.78)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-60-generic root=UUID=1b94d47d-270d-4501-8096-524f3248dbbb ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000099fffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009a00000-0x0000000009dfffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000009e00000-0x0000000009efffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009f00000-0x0000000009f0efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000009f0f000-0x00000000b99e8fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b99e9000-0x00000000babe8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000babe9000-0x00000000c8dfefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c8dff000-0x00000000cbdfefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cbdff000-0x00000000cdf7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cdf7f000-0x00000000cdffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cdfff000-0x00000000cdffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ce000000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fde00000-0x00000000fdefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe0fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed81fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000020e2fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000020e300000-0x000000022fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xb5b28018-0xb5b35857] usable ==> usable
[    0.000000] e820: update [mem 0xb5b28018-0xb5b35857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000bffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000099fffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000009a00000-0x0000000009dfffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000009e00000-0x0000000009efffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000009f00000-0x0000000009f0efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000009f0f000-0x00000000b5b28017] usable
[    0.000000] reserve setup_data: [mem 0x00000000b5b28018-0x00000000b5b35857] usable
[    0.000000] reserve setup_data: [mem 0x00000000b5b35858-0x00000000b99e8fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000b99e9000-0x00000000babe8fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000babe9000-0x00000000c8dfefff] usable
[    0.000000] reserve setup_data: [mem 0x00000000c8dff000-0x00000000cbdfefff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000cbdff000-0x00000000cdf7efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000cdf7f000-0x00000000cdffefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000cdfff000-0x00000000cdffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000ce000000-0x00000000cfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fde00000-0x00000000fdefffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe0fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed81fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000020e2fffff] usable
[    0.000000] reserve setup_data: [mem 0x000000020e300000-0x000000022fffffff] reserved
[    0.000000] efi: EFI v2.70 by HONOR
[    0.000000] efi: ACPI=0xcdffe000 ACPI 2.0=0xcdffe014 TPMFinalLog=0xcdf40000 SMBIOS=0xca58c000 SMBIOS 3.0=0xca58a000 MEMATTR=0xb5bc0018 ESRT=0xb5af1a98 MOKvar=0xb5bc5000 RNG=0xcdfb4018 TPMEventLog=0xb5b36018 
[    0.000000] efi: seeding entropy pool
[    0.000000] random: crng init done
[    0.000000] secureboot: Secure boot enabled
[    0.000000] Kernel is locked down from EFI Secure Boot mode; see man kernel_lockdown.7
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: HONOR NMH-WCX9/NMH-WCX9-PCB, BIOS 1.11 03/31/2022
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2096.033 MHz processor
[    0.000352] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000354] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000364] last_pfn = 0x20e300 max_arch_pfn = 0x400000000
[    0.000630] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000911] last_pfn = 0xce000 max_arch_pfn = 0x400000000
[    0.005405] esrt: Reserving ESRT space from 0x00000000b5af1a98 to 0x00000000b5af1ad0.
[    0.005411] e820: update [mem 0xb5af1000-0xb5af1fff] usable ==> reserved
[    0.005429] e820: update [mem 0xb5bc5000-0xb5bc5fff] usable ==> reserved
[    0.005449] Using GB pages for direct mapping
[    0.006084] secureboot: Secure boot enabled
[    0.006086] RAMDISK: [mem 0xac147000-0xb31fefff]
[    0.006091] ACPI: Early table checksum verification disabled
[    0.006095] ACPI: RSDP 0x00000000CDFFE014 000024 (v02 HONOR )
[    0.006099] ACPI: XSDT 0x00000000CDFC5188 00012C (v01 HONOR  EDK2     00000002      01000013)
[    0.006104] ACPI: FACP 0x00000000CDFE9000 00010C (v05 HONOR  EDK2     00000002 ACPI 00040000)
[    0.006110] ACPI: DSDT 0x00000000CDFDA000 0094C2 (v01 HONOR  EDK2     00000002 ACPI 00040000)
[    0.006113] ACPI: FACS 0x00000000CCED5000 000040
[    0.006116] ACPI: UEFI 0x00000000CDF7E000 000236 (v01 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006119] ACPI: SSDT 0x00000000CDFF5000 007229 (v02 HONOR  EDK2     00000002 ACPI 00040000)
[    0.006122] ACPI: IVRS 0x00000000CDFF4000 0001A4 (v02 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006125] ACPI: SSDT 0x00000000CDFF0000 003A21 (v01 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006128] ACPI: SSDT 0x00000000CDFEF000 000472 (v02 HONOR  EDK2     00001000 ACPI 00040000)
[    0.006131] ACPI: TPM2 0x00000000CDFEE000 00004C (v04 HONOR  EDK2     00000002 ACPI 00040000)
[    0.006134] ACPI: MSDM 0x00000000CDFED000 000055 (v03 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006137] ACPI: SSDT 0x00000000CDFEC000 0008EB (v01 HONOR  EDK2     00001000 ACPI 00040000)
[    0.006140] ACPI: ASF! 0x00000000CDFEB000 0000A5 (v32 HONOR  EDK2     00000002 ACPI 00040000)
[    0.006143] ACPI: BOOT 0x00000000CDFEA000 000028 (v01 HONOR  EDK2     00000002 ACPI 00040000)
[    0.006146] ACPI: HPET 0x00000000CDFE8000 000038 (v01 HONOR  EDK2     00000002 ACPI 00040000)
[    0.006149] ACPI: APIC 0x00000000CDFE7000 000138 (v03 HONOR  EDK2     00000002 ACPI 00040000)
[    0.006153] ACPI: MCFG 0x00000000CDFE6000 00003C (v01 HONOR  EDK2     00000002 ACPI 00040000)
[    0.006156] ACPI: SSDT 0x00000000CDFD9000 000080 (v01 HONOR  EDK2     00000002 ACPI 00040000)
[    0.006159] ACPI: VFCT 0x00000000CDFCB000 00D884 (v01 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006162] ACPI: SSDT 0x00000000CDFCA000 0000F8 (v01 HONOR  EDK2     00001000 ACPI 00040000)
[    0.006165] ACPI: SSDT 0x00000000CDFC6000 003E88 (v02 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006168] ACPI: CRAT 0x00000000CDFFD000 000BA8 (v01 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006171] ACPI: CDIT 0x00000000CDFC4000 000029 (v01 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006174] ACPI: SSDT 0x00000000CDFC3000 000139 (v01 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006177] ACPI: SSDT 0x00000000CDFC2000 000D53 (v01 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006180] ACPI: SSDT 0x00000000CDFC0000 0010C5 (v01 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006183] ACPI: SSDT 0x00000000CDFBC000 0034AA (v01 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006186] ACPI: FPDT 0x00000000CDFBB000 000044 (v01 HONOR  EDK2     00000002 ACPI 00040000)
[    0.006189] ACPI: WSMT 0x00000000CDFB9000 000028 (v01 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006192] ACPI: SSDT 0x00000000CDFE5000 000042 (v01 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006195] ACPI: SSDT 0x00000000CDFE4000 00020A (v01 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006198] ACPI: SSDT 0x00000000CDFB8000 0005BC (v01 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006201] ACPI: SSDT 0x00000000CDFB7000 000307 (v01 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006204] ACPI: SSDT 0x00000000CDFB6000 00007D (v01 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006207] ACPI: SSDT 0x00000000CDFB5000 000517 (v01 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006210] ACPI: BGRT 0x00000000CDFBA000 000038 (v01 HONOR  EDK2     00000001 ACPI 00040000)
[    0.006212] ACPI: Reserving FACP table memory at [mem 0xcdfe9000-0xcdfe910b]
[    0.006214] ACPI: Reserving DSDT table memory at [mem 0xcdfda000-0xcdfe34c1]
[    0.006215] ACPI: Reserving FACS table memory at [mem 0xcced5000-0xcced503f]
[    0.006216] ACPI: Reserving UEFI table memory at [mem 0xcdf7e000-0xcdf7e235]
[    0.006217] ACPI: Reserving SSDT table memory at [mem 0xcdff5000-0xcdffc228]
[    0.006218] ACPI: Reserving IVRS table memory at [mem 0xcdff4000-0xcdff41a3]
[    0.006219] ACPI: Reserving SSDT table memory at [mem 0xcdff0000-0xcdff3a20]
[    0.006220] ACPI: Reserving SSDT table memory at [mem 0xcdfef000-0xcdfef471]
[    0.006221] ACPI: Reserving TPM2 table memory at [mem 0xcdfee000-0xcdfee04b]
[    0.006222] ACPI: Reserving MSDM table memory at [mem 0xcdfed000-0xcdfed054]
[    0.006223] ACPI: Reserving SSDT table memory at [mem 0xcdfec000-0xcdfec8ea]
[    0.006224] ACPI: Reserving ASF! table memory at [mem 0xcdfeb000-0xcdfeb0a4]
[    0.006225] ACPI: Reserving BOOT table memory at [mem 0xcdfea000-0xcdfea027]
[    0.006226] ACPI: Reserving HPET table memory at [mem 0xcdfe8000-0xcdfe8037]
[    0.006227] ACPI: Reserving APIC table memory at [mem 0xcdfe7000-0xcdfe7137]
[    0.006228] ACPI: Reserving MCFG table memory at [mem 0xcdfe6000-0xcdfe603b]
[    0.006229] ACPI: Reserving SSDT table memory at [mem 0xcdfd9000-0xcdfd907f]
[    0.006230] ACPI: Reserving VFCT table memory at [mem 0xcdfcb000-0xcdfd8883]
[    0.006231] ACPI: Reserving SSDT table memory at [mem 0xcdfca000-0xcdfca0f7]
[    0.006232] ACPI: Reserving SSDT table memory at [mem 0xcdfc6000-0xcdfc9e87]
[    0.006233] ACPI: Reserving CRAT table memory at [mem 0xcdffd000-0xcdffdba7]
[    0.006234] ACPI: Reserving CDIT table memory at [mem 0xcdfc4000-0xcdfc4028]
[    0.006235] ACPI: Reserving SSDT table memory at [mem 0xcdfc3000-0xcdfc3138]
[    0.006236] ACPI: Reserving SSDT table memory at [mem 0xcdfc2000-0xcdfc2d52]
[    0.006237] ACPI: Reserving SSDT table memory at [mem 0xcdfc0000-0xcdfc10c4]
[    0.006238] ACPI: Reserving SSDT table memory at [mem 0xcdfbc000-0xcdfbf4a9]
[    0.006239] ACPI: Reserving FPDT table memory at [mem 0xcdfbb000-0xcdfbb043]
[    0.006240] ACPI: Reserving WSMT table memory at [mem 0xcdfb9000-0xcdfb9027]
[    0.006241] ACPI: Reserving SSDT table memory at [mem 0xcdfe5000-0xcdfe5041]
[    0.006242] ACPI: Reserving SSDT table memory at [mem 0xcdfe4000-0xcdfe4209]
[    0.006243] ACPI: Reserving SSDT table memory at [mem 0xcdfb8000-0xcdfb85bb]
[    0.006244] ACPI: Reserving SSDT table memory at [mem 0xcdfb7000-0xcdfb7306]
[    0.006245] ACPI: Reserving SSDT table memory at [mem 0xcdfb6000-0xcdfb607c]
[    0.006246] ACPI: Reserving SSDT table memory at [mem 0xcdfb5000-0xcdfb5516]
[    0.006247] ACPI: Reserving BGRT table memory at [mem 0xcdfba000-0xcdfba037]
[    0.006375] No NUMA configuration found
[    0.006376] Faking a node at [mem 0x0000000000000000-0x000000020e2fffff]
[    0.006384] NODE_DATA(0) allocated [mem 0x20e2d6000-0x20e2fffff]
[    0.006582] Zone ranges:
[    0.006583]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.006585]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.006587]   Normal   [mem 0x0000000100000000-0x000000020e2fffff]
[    0.006589]   Device   empty
[    0.006590] Movable zone start for each node
[    0.006592] Early memory node ranges
[    0.006592]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.006593]   node   0: [mem 0x0000000000100000-0x00000000099fffff]
[    0.006594]   node   0: [mem 0x0000000009e00000-0x0000000009efffff]
[    0.006595]   node   0: [mem 0x0000000009f0f000-0x00000000b99e8fff]
[    0.006597]   node   0: [mem 0x00000000babe9000-0x00000000c8dfefff]
[    0.006597]   node   0: [mem 0x00000000cdfff000-0x00000000cdffffff]
[    0.006598]   node   0: [mem 0x0000000100000000-0x000000020e2fffff]
[    0.006600] Initmem setup node 0 [mem 0x0000000000001000-0x000000020e2fffff]
[    0.006604] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.006626] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.006790] On node 0, zone DMA32: 1024 pages in unavailable ranges
[    0.012499] On node 0, zone DMA32: 15 pages in unavailable ranges
[    0.013015] On node 0, zone DMA32: 4608 pages in unavailable ranges
[    0.013233] On node 0, zone DMA32: 20992 pages in unavailable ranges
[    0.022365] On node 0, zone Normal: 8192 pages in unavailable ranges
[    0.022450] On node 0, zone Normal: 7424 pages in unavailable ranges
[    0.022565] ACPI: PM-Timer IO Port: 0x408
[    0.022573] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.022575] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.022577] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.022578] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.022579] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.022580] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.022581] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.022582] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.022583] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.022584] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.022584] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.022585] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.022586] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.022587] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.022588] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.022589] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.022603] IOAPIC[0]: apic_id 33, version 33, address 0xfec00000, GSI 0-23
[    0.022608] IOAPIC[1]: apic_id 34, version 33, address 0xfec01000, GSI 24-55
[    0.022610] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.022612] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.022615] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.022616] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.022628] e820: update [mem 0xb5aa3000-0xb5acbfff] usable ==> reserved
[    0.022644] smpboot: Allowing 16 CPUs, 4 hotplug CPUs
[    0.022673] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.022675] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000bffff]
[    0.022676] PM: hibernation: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.022678] PM: hibernation: Registered nosave memory: [mem 0x09a00000-0x09dfffff]
[    0.022680] PM: hibernation: Registered nosave memory: [mem 0x09f00000-0x09f0efff]
[    0.022681] PM: hibernation: Registered nosave memory: [mem 0xb5aa3000-0xb5acbfff]
[    0.022683] PM: hibernation: Registered nosave memory: [mem 0xb5af1000-0xb5af1fff]
[    0.022685] PM: hibernation: Registered nosave memory: [mem 0xb5b28000-0xb5b28fff]
[    0.022687] PM: hibernation: Registered nosave memory: [mem 0xb5b35000-0xb5b35fff]
[    0.022689] PM: hibernation: Registered nosave memory: [mem 0xb5bc5000-0xb5bc5fff]
[    0.022690] PM: hibernation: Registered nosave memory: [mem 0xb99e9000-0xbabe8fff]
[    0.022692] PM: hibernation: Registered nosave memory: [mem 0xc8dff000-0xcbdfefff]
[    0.022693] PM: hibernation: Registered nosave memory: [mem 0xcbdff000-0xcdf7efff]
[    0.022694] PM: hibernation: Registered nosave memory: [mem 0xcdf7f000-0xcdffefff]
[    0.022696] PM: hibernation: Registered nosave memory: [mem 0xce000000-0xcfffffff]
[    0.022696] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
[    0.022697] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.022698] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfddfffff]
[    0.022699] PM: hibernation: Registered nosave memory: [mem 0xfde00000-0xfdefffff]
[    0.022699] PM: hibernation: Registered nosave memory: [mem 0xfdf00000-0xfdffffff]
[    0.022700] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe0fffff]
[    0.022701] PM: hibernation: Registered nosave memory: [mem 0xfe100000-0xfebfffff]
[    0.022702] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[    0.022702] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.022703] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.022704] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[    0.022705] PM: hibernation: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[    0.022705] PM: hibernation: Registered nosave memory: [mem 0xfec21000-0xfed7ffff]
[    0.022706] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed81fff]
[    0.022707] PM: hibernation: Registered nosave memory: [mem 0xfed82000-0xfedfffff]
[    0.022707] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.022708] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.022709] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.022711] [mem 0xd0000000-0xf7ffffff] available for PCI devices
[    0.022712] Booting paravirtualized kernel on bare hardware
[    0.022715] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.022724] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.023466] percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u262144
[    0.023476] pcpu-alloc: s208896 r8192 d28672 u262144 alloc=1*2097152
[    0.023479] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.023523] Built 1 zonelists, mobility grouping on.  Total pages: 1893509
[    0.023524] Policy zone: Normal
[    0.023526] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-60-generic root=UUID=1b94d47d-270d-4501-8096-524f3248dbbb ro quiet splash vt.handoff=7
[    0.023597] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-60-generic", will be passed to user space.
[    0.024576] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.025063] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.025130] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.055826] Memory: 7244180K/7694908K available (16393K kernel code, 4374K rwdata, 10792K rodata, 3236K init, 6572K bss, 450468K reserved, 0K cma-reserved)
[    0.055954] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.055969] ftrace: allocating 50047 entries in 196 pages
[    0.078384] ftrace: allocated 196 pages with 3 groups
[    0.078521] rcu: Hierarchical RCU implementation.
[    0.078522] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[    0.078523] 	Rude variant of Tasks RCU enabled.
[    0.078524] 	Tracing variant of Tasks RCU enabled.
[    0.078525] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.078525] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.081538] NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
[    0.081783] Console: colour dummy device 80x25
[    0.081799] printk: console [tty0] enabled
[    0.081817] ACPI: Core revision 20210730
[    0.082050] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.082069] APIC: Switch to symmetric I/O mode setup
[    0.082752] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:160
[    0.082754] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:160
[    0.082755] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:160
[    0.082756] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:160
[    0.083029] Switched APIC routing to physical flat.
[    0.083769] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.102077] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e368d1db5c, max_idle_ns: 440795292432 ns
[    0.102087] Calibrating delay loop (skipped), value calculated using timer frequency.. 4192.06 BogoMIPS (lpj=8384132)
[    0.102089] pid_max: default: 32768 minimum: 301
[    0.105843] LSM: Security Framework initializing
[    0.105861] landlock: Up and running.
[    0.105862] Yama: becoming mindful.
[    0.105894] AppArmor: AppArmor initialized
[    0.105947] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.105962] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.106228] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.106283] LVT offset 1 assigned for vector 0xf9
[    0.106388] LVT offset 2 assigned for vector 0xf4
[    0.106414] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.106415] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.106423] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.106425] Spectre V2 : Mitigation: Retpolines
[    0.106425] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.106426] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.106427] Spectre V2 : Enabling Speculation Barrier for firmware calls
[    0.106427] RETBleed: Mitigation: untrained return thunk
[    0.106429] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.106430] Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation
[    0.106431] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.106432] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.116568] Freeing SMP alternatives memory: 40K
[    0.227634] smpboot: CPU0: AMD Ryzen 5 5500U with Radeon Graphics (family: 0x17, model: 0x68, stepping: 0x1)
[    0.227774] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.227780] ... version:                0
[    0.227781] ... bit width:              48
[    0.227782] ... generic registers:      6
[    0.227782] ... value mask:             0000ffffffffffff
[    0.227783] ... max period:             00007fffffffffff
[    0.227784] ... fixed-purpose events:   0
[    0.227784] ... event mask:             000000000000003f
[    0.227850] rcu: Hierarchical SRCU implementation.
[    0.228276] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.228393] smp: Bringing up secondary CPUs ...
[    0.228477] x86: Booting SMP configuration:
[    0.228478] .... node  #0, CPUs:        #1
[    0.230081] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.230081]   #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
[    0.252330] smp: Brought up 1 node, 12 CPUs
[    0.252330] smpboot: Max logical packages: 2
[    0.252330] smpboot: Total of 12 processors activated (50304.79 BogoMIPS)
[    0.254337] devtmpfs: initialized
[    0.254337] x86/mm: Memory block size: 128MB
[    0.254540] ACPI: PM: Registering ACPI NVS region [mem 0x09f00000-0x09f0efff] (61440 bytes)
[    0.254540] ACPI: PM: Registering ACPI NVS region [mem 0xcbdff000-0xcdf7efff] (35127296 bytes)
[    0.254540] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.254540] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.254540] pinctrl core: initialized pinctrl subsystem
[    0.254589] PM: RTC time: 20:10:19, date: 2023-03-04
[    0.254742] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.254876] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.254959] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.255055] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.255066] audit: initializing netlink subsys (disabled)
[    0.255077] audit: type=2000 audit(1677960618.172:1): state=initialized audit_enabled=0 res=1
[    0.255077] thermal_sys: Registered thermal governor 'fair_share'
[    0.255077] thermal_sys: Registered thermal governor 'bang_bang'
[    0.255077] thermal_sys: Registered thermal governor 'step_wise'
[    0.255077] thermal_sys: Registered thermal governor 'user_space'
[    0.255077] thermal_sys: Registered thermal governor 'power_allocator'
[    0.255077] EISA bus registered
[    0.255077] cpuidle: using governor ladder
[    0.255077] cpuidle: using governor menu
[    0.255077] Simple Boot Flag at 0x44 set to 0x1
[    0.255077] ACPI: bus type PCI registered
[    0.255077] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.255077] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.255077] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.255077] PCI: Using configuration type 1 for base access
[    0.255448] Kprobes globally optimized
[    0.255451] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.255451] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.258143] ACPI: Added _OSI(Module Device)
[    0.258144] ACPI: Added _OSI(Processor Device)
[    0.258145] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.258146] ACPI: Added _OSI(Processor Aggregator Device)
[    0.258147] ACPI: Added _OSI(Linux-Dell-Video)
[    0.258148] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.258148] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.273715] ACPI: 18 ACPI AML tables successfully acquired and loaded
[    0.275264] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.277245] ACPI: EC: EC started
[    0.277246] ACPI: EC: interrupt blocked
[    0.277465] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.277467] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions
[    0.277468] ACPI: Interpreter enabled
[    0.277482] ACPI: PM: (supports S0 S4 S5)
[    0.277482] ACPI: Using IOAPIC for interrupt routing
[    0.277638] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.277640] PCI: Using E820 reservations for host bridge windows
[    0.279107] ACPI: PM: Power Resource [BTRT]
[    0.279181] ACPI: PM: Power Resource [P0NV]
[    0.279612] ACPI: PM: Power Resource [P0U0]
[    0.279630] ACPI: PM: Power Resource [P3U0]
[    0.280107] ACPI: PM: Power Resource [P0U1]
[    0.280124] ACPI: PM: Power Resource [P3U1]
[    0.280416] ACPI: PM: Power Resource [BTRT]
[    0.284523] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.284528] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.284677] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
[    0.284819] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.284827] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.285130] PCI host bridge to bus 0000:00
[    0.285134] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.285135] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.285137] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.285138] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000cffff window]
[    0.285139] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.285140] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000effff window]
[    0.285141] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff window]
[    0.285142] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfeafffff window]
[    0.285143] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfed811ff window]
[    0.285144] pci_bus 0000:00: root bus resource [mem 0xfed81900-0xfed81fff window]
[    0.285145] pci_bus 0000:00: root bus resource [mem 0xfedc0000-0xfedc0fff window]
[    0.285146] pci_bus 0000:00: root bus resource [mem 0xfedc6000-0xfedc6fff window]
[    0.285147] pci_bus 0000:00: root bus resource [mem 0x250200000-0xfcffffffff window]
[    0.285185] pci 0000:00:00.0: [1022:1630] type 00 class 0x060000
[    0.285310] pci 0000:00:00.2: [1022:1631] type 00 class 0x080600
[    0.285462] pci 0000:00:01.0: [1022:1632] type 00 class 0x060000
[    0.285588] pci 0000:00:02.0: [1022:1632] type 00 class 0x060000
[    0.285711] pci 0000:00:02.2: [1022:1634] type 01 class 0x060400
[    0.285762] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[    0.285883] pci 0000:00:02.4: [1022:1634] type 01 class 0x060400
[    0.285933] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[    0.286057] pci 0000:00:08.0: [1022:1632] type 00 class 0x060000
[    0.286173] pci 0000:00:08.1: [1022:1635] type 01 class 0x060400
[    0.286194] pci 0000:00:08.1: enabling Extended Tags
[    0.286222] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.286366] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.286529] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.286697] pci 0000:00:18.0: [1022:1448] type 00 class 0x060000
[    0.286791] pci 0000:00:18.1: [1022:1449] type 00 class 0x060000
[    0.286884] pci 0000:00:18.2: [1022:144a] type 00 class 0x060000
[    0.286978] pci 0000:00:18.3: [1022:144b] type 00 class 0x060000
[    0.287071] pci 0000:00:18.4: [1022:144c] type 00 class 0x060000
[    0.287165] pci 0000:00:18.5: [1022:144d] type 00 class 0x060000
[    0.287258] pci 0000:00:18.6: [1022:144e] type 00 class 0x060000
[    0.287352] pci 0000:00:18.7: [1022:144f] type 00 class 0x060000
[    0.287452] pci 0000:01:00.0: [17cb:1103] type 00 class 0x028000
[    0.287470] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd01fffff 64bit]
[    0.287566] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.287628] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:02.2 (capable of 7.876 Gb/s with 8.0 GT/s PCIe x1 link)
[    0.287760] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.287764] pci 0000:00:02.2:   bridge window [mem 0xd0000000-0xd01fffff]
[    0.287899] pci 0000:02:00.0: [15b7:5009] type 00 class 0x010802
[    0.287916] pci 0000:02:00.0: reg 0x10: [mem 0xd0600000-0xd0603fff 64bit]
[    0.287938] pci 0000:02:00.0: reg 0x20: [mem 0xd0604000-0xd06040ff 64bit]
[    0.288105] pci 0000:00:02.4: PCI bridge to [bus 02]
[    0.288109] pci 0000:00:02.4:   bridge window [mem 0xd0600000-0xd06fffff]
[    0.288200] pci 0000:03:00.0: [1002:164c] type 00 class 0x030000
[    0.288211] pci 0000:03:00.0: reg 0x10: [mem 0xfce0000000-0xfcefffffff 64bit pref]
[    0.288218] pci 0000:03:00.0: reg 0x18: [mem 0xfcf0000000-0xfcf01fffff 64bit pref]
[    0.288223] pci 0000:03:00.0: reg 0x20: [io  0x1000-0x10ff]
[    0.288228] pci 0000:03:00.0: reg 0x24: [mem 0xd0500000-0xd057ffff]
[    0.288236] pci 0000:03:00.0: enabling Extended Tags
[    0.288246] pci 0000:03:00.0: BAR 0: assigned to efifb
[    0.288282] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.288314] pci 0000:03:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[    0.288380] pci 0000:03:00.1: [1002:1637] type 00 class 0x040300
[    0.288387] pci 0000:03:00.1: reg 0x10: [mem 0xd05c8000-0xd05cbfff]
[    0.288407] pci 0000:03:00.1: enabling Extended Tags
[    0.288434] pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold
[    0.288504] pci 0000:03:00.2: [1022:15df] type 00 class 0x108000
[    0.288517] pci 0000:03:00.2: reg 0x18: [mem 0xd0400000-0xd04fffff]
[    0.288526] pci 0000:03:00.2: reg 0x24: [mem 0xd05cc000-0xd05cdfff]
[    0.288533] pci 0000:03:00.2: enabling Extended Tags
[    0.288630] pci 0000:03:00.3: [1022:1639] type 00 class 0x0c0330
[    0.288640] pci 0000:03:00.3: reg 0x10: [mem 0xd0200000-0xd02fffff 64bit]
[    0.288663] pci 0000:03:00.3: enabling Extended Tags
[    0.288691] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
[    0.288765] pci 0000:03:00.4: [1022:1639] type 00 class 0x0c0330
[    0.288775] pci 0000:03:00.4: reg 0x10: [mem 0xd0300000-0xd03fffff 64bit]
[    0.288798] pci 0000:03:00.4: enabling Extended Tags
[    0.288826] pci 0000:03:00.4: PME# supported from D0 D3hot D3cold
[    0.288901] pci 0000:03:00.5: [1022:15e2] type 00 class 0x048000
[    0.288909] pci 0000:03:00.5: reg 0x10: [mem 0xd0580000-0xd05bffff]
[    0.288929] pci 0000:03:00.5: enabling Extended Tags
[    0.288955] pci 0000:03:00.5: PME# supported from D0 D3hot D3cold
[    0.289026] pci 0000:03:00.6: [1022:15e3] type 00 class 0x040300
[    0.289033] pci 0000:03:00.6: reg 0x10: [mem 0xd05c0000-0xd05c7fff]
[    0.289053] pci 0000:03:00.6: enabling Extended Tags
[    0.289079] pci 0000:03:00.6: PME# supported from D0 D3hot D3cold
[    0.289149] pci 0000:00:08.1: PCI bridge to [bus 03]
[    0.289152] pci 0000:00:08.1:   bridge window [io  0x1000-0x1fff]
[    0.289154] pci 0000:00:08.1:   bridge window [mem 0xd0200000-0xd05fffff]
[    0.289156] pci 0000:00:08.1:   bridge window [mem 0xfce0000000-0xfcf01fffff 64bit pref]
[    0.289903] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.289905] ACPI: PCI: Interrupt link LNKA disabled
[    0.289971] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.289972] ACPI: PCI: Interrupt link LNKB disabled
[    0.290023] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.290024] ACPI: PCI: Interrupt link LNKC disabled
[    0.290092] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.290093] ACPI: PCI: Interrupt link LNKD disabled
[    0.290153] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.290154] ACPI: PCI: Interrupt link LNKE disabled
[    0.290201] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.290202] ACPI: PCI: Interrupt link LNKF disabled
[    0.290248] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.290249] ACPI: PCI: Interrupt link LNKG disabled
[    0.290296] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.290297] ACPI: PCI: Interrupt link LNKH disabled
[    0.291233] ACPI: EC: interrupt unblocked
[    0.291234] ACPI: EC: event unblocked
[    0.291244] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.291245] ACPI: EC: GPE=0x3
[    0.291246] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC initialization complete
[    0.291247] ACPI: \_SB_.PCI0.LPC0.EC0_: EC: Used to handle transactions and events
[    0.291293] iommu: Default domain type: Translated 
[    0.291293] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.291293] SCSI subsystem initialized
[    0.291293] libata version 3.00 loaded.
[    0.291293] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.291293] pci 0000:03:00.0: vgaarb: bridge control possible
[    0.291293] pci 0000:03:00.0: vgaarb: setting as boot device
[    0.291293] vgaarb: loaded
[    0.291293] ACPI: bus type USB registered
[    0.291293] usbcore: registered new interface driver usbfs
[    0.291293] usbcore: registered new interface driver hub
[    0.291293] usbcore: registered new device driver usb
[    0.295399] pps_core: LinuxPPS API ver. 1 registered
[    0.295401] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.295403] PTP clock support registered
[    0.295415] EDAC MC: Ver: 3.0.0
[    0.295415] Registered efivars operations
[    0.295415] NetLabel: Initializing
[    0.295415] NetLabel:  domain hash size = 128
[    0.295415] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.295415] NetLabel:  unlabeled traffic allowed by default
[    0.295415] PCI: Using ACPI for IRQ routing
[    0.296130] PCI: pci_cache_line_size set to 64 bytes
[    0.298095] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.298097] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.298098] e820: reserve RAM buffer [mem 0x09a00000-0x0bffffff]
[    0.298099] e820: reserve RAM buffer [mem 0x09f00000-0x0bffffff]
[    0.298100] e820: reserve RAM buffer [mem 0xb5aa3000-0xb7ffffff]
[    0.298101] e820: reserve RAM buffer [mem 0xb5af1000-0xb7ffffff]
[    0.298102] e820: reserve RAM buffer [mem 0xb5b28018-0xb7ffffff]
[    0.298103] e820: reserve RAM buffer [mem 0xb5bc5000-0xb7ffffff]
[    0.298103] e820: reserve RAM buffer [mem 0xb99e9000-0xbbffffff]
[    0.298104] e820: reserve RAM buffer [mem 0xc8dff000-0xcbffffff]
[    0.298105] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[    0.298105] e820: reserve RAM buffer [mem 0x20e300000-0x20fffffff]
[    0.298132] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.298136] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.301481] clocksource: Switched to clocksource tsc-early
[    0.305473] VFS: Disk quotas dquot_6.6.0
[    0.305489] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.305583] AppArmor: AppArmor Filesystem Enabled
[    0.305619] pnp: PnP ACPI init
[    0.313214] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[    0.313221] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.313224] system 00:00: [mem 0xfde00000-0xfdefffff] has been reserved
[    0.313519] system 00:03: [io  0x0400-0x04cf] has been reserved
[    0.313523] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.313525] system 00:03: [io  0x04d6] has been reserved
[    0.313528] system 00:03: [io  0x0c00-0x0c01] has been reserved
[    0.313530] system 00:03: [io  0x0c14] has been reserved
[    0.313532] system 00:03: [io  0x0c50-0x0c52] has been reserved
[    0.313535] system 00:03: [io  0x0c6c] has been reserved
[    0.313537] system 00:03: [io  0x0c6f] has been reserved
[    0.313539] system 00:03: [io  0x0cd0-0x0cdb] has been reserved
[    0.313642] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.314803] pnp: PnP ACPI: found 5 devices
[    0.322193] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.322333] NET: Registered PF_INET protocol family
[    0.322521] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.324063] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.324105] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.324164] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.324422] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.324566] TCP: Hash tables configured (established 65536 bind 65536)
[    0.324661] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    0.324689] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.324711] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.324757] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.324761] NET: Registered PF_XDP protocol family
[    0.324776] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.324782] pci 0000:00:02.2:   bridge window [mem 0xd0000000-0xd01fffff]
[    0.324786] pci 0000:00:02.4: PCI bridge to [bus 02]
[    0.324789] pci 0000:00:02.4:   bridge window [mem 0xd0600000-0xd06fffff]
[    0.324794] pci 0000:00:08.1: PCI bridge to [bus 03]
[    0.324796] pci 0000:00:08.1:   bridge window [io  0x1000-0x1fff]
[    0.324798] pci 0000:00:08.1:   bridge window [mem 0xd0200000-0xd05fffff]
[    0.324800] pci 0000:00:08.1:   bridge window [mem 0xfce0000000-0xfcf01fffff 64bit pref]
[    0.324804] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.324806] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.324807] pci_bus 0000:00: resource 6 [mem 0x000c0000-0x000cffff window]
[    0.324808] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff window]
[    0.324809] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000effff window]
[    0.324810] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xf7ffffff window]
[    0.324811] pci_bus 0000:00: resource 10 [mem 0xfc000000-0xfeafffff window]
[    0.324813] pci_bus 0000:00: resource 11 [mem 0xfed45000-0xfed811ff window]
[    0.324814] pci_bus 0000:00: resource 12 [mem 0xfed81900-0xfed81fff window]
[    0.324815] pci_bus 0000:00: resource 13 [mem 0xfedc0000-0xfedc0fff window]
[    0.324816] pci_bus 0000:00: resource 14 [mem 0xfedc6000-0xfedc6fff window]
[    0.324817] pci_bus 0000:00: resource 15 [mem 0x250200000-0xfcffffffff window]
[    0.324818] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd01fffff]
[    0.324820] pci_bus 0000:02: resource 1 [mem 0xd0600000-0xd06fffff]
[    0.324821] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.324822] pci_bus 0000:03: resource 1 [mem 0xd0200000-0xd05fffff]
[    0.324823] pci_bus 0000:03: resource 2 [mem 0xfce0000000-0xfcf01fffff 64bit pref]
[    0.325002] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0
[    0.325010] pci 0000:03:00.3: extending delay after power-on from D3hot to 20 msec
[    0.332268] pci 0000:03:00.4: extending delay after power-on from D3hot to 20 msec
[    0.359756] pci 0000:03:00.4: quirk_usb_early_handoff+0x0/0x6a0 took 26840 usecs
[    0.359767] PCI: CLS 64 bytes, default 64
[    0.359778] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.359829] Trying to unpack rootfs image as initramfs...
[    0.359832] pci 0000:00:00.2: can't derive routing for PCI INT A
[    0.359833] pci 0000:00:00.2: PCI INT A: not connected
[    0.359847] pci 0000:00:01.0: Adding to iommu group 0
[    0.359858] pci 0000:00:02.0: Adding to iommu group 1
[    0.359864] pci 0000:00:02.2: Adding to iommu group 2
[    0.359871] pci 0000:00:02.4: Adding to iommu group 3
[    0.359880] pci 0000:00:08.0: Adding to iommu group 4
[    0.359885] pci 0000:00:08.1: Adding to iommu group 4
[    0.359896] pci 0000:00:14.0: Adding to iommu group 5
[    0.359902] pci 0000:00:14.3: Adding to iommu group 5
[    0.359921] pci 0000:00:18.0: Adding to iommu group 6
[    0.359927] pci 0000:00:18.1: Adding to iommu group 6
[    0.359933] pci 0000:00:18.2: Adding to iommu group 6
[    0.359940] pci 0000:00:18.3: Adding to iommu group 6
[    0.359946] pci 0000:00:18.4: Adding to iommu group 6
[    0.359952] pci 0000:00:18.5: Adding to iommu group 6
[    0.359958] pci 0000:00:18.6: Adding to iommu group 6
[    0.359964] pci 0000:00:18.7: Adding to iommu group 6
[    0.359972] pci 0000:01:00.0: Adding to iommu group 7
[    0.359979] pci 0000:02:00.0: Adding to iommu group 8
[    0.359992] pci 0000:03:00.0: Adding to iommu group 4
[    0.359996] pci 0000:03:00.1: Adding to iommu group 4
[    0.360000] pci 0000:03:00.2: Adding to iommu group 4
[    0.360004] pci 0000:03:00.3: Adding to iommu group 4
[    0.360007] pci 0000:03:00.4: Adding to iommu group 4
[    0.360010] pci 0000:03:00.5: Adding to iommu group 4
[    0.360014] pci 0000:03:00.6: Adding to iommu group 4
[    0.361364] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    0.361371] AMD-Vi: Extended features (0x206d73ef22254ade): PPR X2APIC NX GT IA GA PC GA_vAPIC
[    0.361377] AMD-Vi: Interrupt remapping enabled
[    0.361379] AMD-Vi: Virtual APIC enabled
[    0.361379] AMD-Vi: X2APIC enabled
[    0.361629] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.361630] software IO TLB: mapped [mem 0x00000000c452f000-0x00000000c852f000] (64MB)
[    0.361693] LVT offset 0 assigned for vector 0x400
[    0.362003] perf: AMD IBS detected (0x000003ff)
[    0.362010] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.362723] Initialise system trusted keyrings
[    0.362735] Key type blacklist registered
[    0.362847] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.363658] zbud: loaded
[    0.363862] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.364090] fuse: init (API version 7.34)
[    0.364342] integrity: Platform Keyring initialized
[    0.366955] Key type asymmetric registered
[    0.366957] Asymmetric key parser 'x509' registered
[    0.366983] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.367090] io scheduler mq-deadline registered
[    0.368836] pcieport 0000:00:02.2: PME: Signaling with IRQ 34
[    0.368930] pcieport 0000:00:02.4: PME: Signaling with IRQ 35
[    0.369020] pcieport 0000:00:08.1: PME: Signaling with IRQ 36
[    0.369090] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.371192] ACPI: AC: AC Adapter [ACAD] (off-line)
[    0.371259] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.371279] ACPI: button: Power Button [PWRB]
[    0.371322] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.371333] ACPI: button: Lid Switch [LID0]
[    0.371465] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1501
[    0.371487] Monitor-Mwait will be used to enter C-1 state
[    0.371493] ACPI: \_SB_.PLTF.C000: Found 3 idle states
[    0.371596] ACPI: \_SB_.PLTF.C001: Found 3 idle states
[    0.380334] ACPI: \_SB_.PLTF.C002: Found 3 idle states
[    0.380830] ACPI: \_SB_.PLTF.C003: Found 3 idle states
[    0.381038] ACPI: \_SB_.PLTF.C004: Found 3 idle states
[    0.381309] ACPI: \_SB_.PLTF.C005: Found 3 idle states
[    0.381522] ACPI: \_SB_.PLTF.C006: Found 3 idle states
[    0.381822] ACPI: \_SB_.PLTF.C007: Found 3 idle states
[    0.382149] ACPI: \_SB_.PLTF.C008: Found 3 idle states
[    0.382477] ACPI: \_SB_.PLTF.C009: Found 3 idle states
[    0.382744] ACPI: \_SB_.PLTF.C00A: Found 3 idle states
[    0.382967] ACPI: \_SB_.PLTF.C00B: Found 3 idle states
[    0.383631] thermal LNXTHERM:00: registered as thermal_zone0
[    0.383635] ACPI: thermal: Thermal Zone [TZ01] (9 C)
[    0.383873] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.384439] ACPI: battery: Slot [BAT1] (battery present)
[    0.385319] Linux agpgart interface v0.103
[    0.410288] loop: module loaded
[    0.410648] tun: Universal TUN/TAP device driver, 1.6
[    0.410712] PPP generic driver version 2.4.2
[    0.410771] VFIO - User Level meta-driver version: 0.3
[    0.410926] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.410930] ehci-pci: EHCI PCI platform driver
[    0.410937] ehci-platform: EHCI generic platform driver
[    0.410944] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.410946] ohci-pci: OHCI PCI platform driver
[    0.410951] ohci-platform: OHCI generic platform driver
[    0.410956] uhci_hcd: USB Universal Host Controller Interface driver
[    0.411014] i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
[    0.411016] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.412467] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.412571] mousedev: PS/2 mouse device common for all mice
[    0.412676] rtc_cmos 00:01: RTC can wake from S4
[    0.412862] rtc_cmos 00:01: registered as rtc0
[    0.412891] rtc_cmos 00:01: setting system clock to 2023-03-04T20:10:19 UTC (1677960619)
[    0.412908] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.412913] i2c_dev: i2c /dev entries driver
[    0.412967] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    0.412997] device-mapper: uevent: version 1.0.3
[    0.413042] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    0.413059] platform eisa.0: Probing EISA bus 0
[    0.413062] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.413063] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.413064] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.413065] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.413066] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.413067] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.413068] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.413069] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.413070] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.413071] platform eisa.0: EISA: Detected 0 cards
[    0.414899] ledtrig-cpu: registered to indicate activity on CPUs
[    0.414952] efifb: probing for efifb
[    0.414991] efifb: showing boot graphics
[    0.416385] efifb: framebuffer at 0xfce0000000, using 8100k, total 8100k
[    0.416388] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.416390] efifb: scrolling: redraw
[    0.416391] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.416484] fbcon: Deferring console take-over
[    0.416486] fb0: EFI VGA frame buffer device
[    0.416497] EFI Variables Facility v0.08 2004-May-17
[    0.420333] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.421222] drop_monitor: Initializing network drop monitor service
[    0.421341] NET: Registered PF_INET6 protocol family
[    0.560704] Freeing initrd memory: 115424K
[    0.566173] Segment Routing with IPv6
[    0.566197] In-situ OAM (IOAM) with IPv6
[    0.566247] NET: Registered PF_PACKET protocol family
[    0.566373] Key type dns_resolver registered
[    0.567948] microcode: CPU0: patch_level=0x08608103
[    0.567958] microcode: CPU1: patch_level=0x08608103
[    0.567980] microcode: CPU2: patch_level=0x08608103
[    0.567990] microcode: CPU3: patch_level=0x08608103
[    0.568005] microcode: CPU4: patch_level=0x08608103
[    0.568011] microcode: CPU5: patch_level=0x08608103
[    0.568030] microcode: CPU6: patch_level=0x08608103
[    0.568041] microcode: CPU7: patch_level=0x08608103
[    0.568056] microcode: CPU8: patch_level=0x08608103
[    0.568063] microcode: CPU9: patch_level=0x08608103
[    0.568082] microcode: CPU10: patch_level=0x08608103
[    0.568093] microcode: CPU11: patch_level=0x08608103
[    0.568159] microcode: Microcode Update Driver: v2.2.
[    0.568376] resctrl: L3 allocation detected
[    0.568377] resctrl: MB allocation detected
[    0.568378] resctrl: L3 monitoring detected
[    0.568382] IPI shorthand broadcast: enabled
[    0.568392] sched_clock: Marking stable (568019454, 342749)->(1313431194, -745068991)
[    0.568705] registered taskstats version 1
[    0.568900] Loading compiled-in X.509 certificates
[    0.569406] Loaded X.509 cert 'Build time autogenerated kernel key: 52e754b11b45338343277fbd8546035bc6526e3e'
[    0.569756] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    0.570101] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    0.570102] blacklist: Loading compiled-in revocation X.509 certificates
[    0.570114] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[    0.570125] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
[    0.570137] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
[    0.570146] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
[    0.570156] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
[    0.570166] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
[    0.570175] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
[    0.570185] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
[    0.570693] zswap: loaded using pool lzo/zbud
[    0.571191] Key type .fscrypt registered
[    0.571192] Key type fscrypt-provisioning registered
[    0.571340] Key type trusted registered
[    0.573194] Key type encrypted registered
[    0.573198] AppArmor: AppArmor sha1 policy hashing enabled
[    0.574573] integrity: Loading X.509 certificate: UEFI:db
[    0.574636] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.574638] integrity: Loading X.509 certificate: UEFI:db
[    0.574670] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.574672] integrity: Loading X.509 certificate: UEFI:db
[    0.575032] integrity: Loaded X.509 cert 'H98Q KEY: 3d526896dedc1ea94520cc0062409aaf'
[    0.575033] integrity: Loading X.509 certificate: UEFI:db
[    0.575149] integrity: Loaded X.509 cert 'HWSecureKey: b5e37413591731a947645727eb6923f7'
[    0.577737] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
[    0.578024] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.578031] Loading compiled-in module X.509 certificates
[    0.578825] Loaded X.509 cert 'Build time autogenerated kernel key: 52e754b11b45338343277fbd8546035bc6526e3e'
[    0.578828] ima: Allocated hash algorithm: sha1
[    0.614046] ima: No architecture policies found
[    0.614076] evm: Initialising EVM extended attributes:
[    0.614078] evm: security.selinux
[    0.614081] evm: security.SMACK64
[    0.614083] evm: security.SMACK64EXEC
[    0.614084] evm: security.SMACK64TRANSMUTE
[    0.614085] evm: security.SMACK64MMAP
[    0.614087] evm: security.apparmor
[    0.614088] evm: security.ima
[    0.614089] evm: security.capability
[    0.614091] evm: HMAC attrs: 0x1
[    0.614606] PM:   Magic number: 15:20:194
[    0.615509] acpi_cpufreq: overriding BIOS provided _PSD data
[    0.616532] RAS: Correctable Errors collector initialized.
[    0.616536] Lockdown: swapper/0: hibernation is restricted; see man kernel_lockdown.7
[    0.618837] Freeing unused decrypted memory: 2036K
[    0.619303] Freeing unused kernel image (initmem) memory: 3236K
[    0.636461] Write protecting the kernel read-only data: 30720k
[    0.637230] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    0.637546] Freeing unused kernel image (rodata/data gap) memory: 1496K
[    0.693747] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.693754] Run /init as init process
[    0.693755]   with arguments:
[    0.693757]     /init
[    0.693757]     splash
[    0.693758]   with environment:
[    0.693758]     HOME=/
[    0.693759]     TERM=linux
[    0.693760]     BOOT_IMAGE=/boot/vmlinuz-5.15.0-60-generic
[    0.756867] hid: raw HID events driver (C) Jiri Kosina
[    0.756939] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    0.756943] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    0.757203] ACPI: video: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    0.757713] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    0.757762] xhci_hcd 0000:03:00.3: xHCI Host Controller
[    0.757768] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 1
[    0.757863] xhci_hcd 0000:03:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
[    0.758262] xhci_hcd 0000:03:00.3: xHCI Host Controller
[    0.758266] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 2
[    0.758268] xhci_hcd 0000:03:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    0.758299] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    0.758301] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758302] usb usb1: Product: xHCI Host Controller
[    0.758303] usb usb1: Manufacturer: Linux 5.15.0-60-generic xhci-hcd
[    0.758305] usb usb1: SerialNumber: 0000:03:00.3
[    0.758427] acpi device:10: registered as cooling_device12
[    0.758460] hub 1-0:1.0: USB hub found
[    0.758475] hub 1-0:1.0: 4 ports detected
[    0.758554] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0f/LNXVIDEO:00/input/input3
[    0.759133] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.759138] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    0.759153] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    0.759155] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.759157] usb usb2: Product: xHCI Host Controller
[    0.759158] usb usb2: Manufacturer: Linux 5.15.0-60-generic xhci-hcd
[    0.759160] usb usb2: SerialNumber: 0000:03:00.3
[    0.759247] hub 2-0:1.0: USB hub found
[    0.759252] hub 2-0:1.0: 2 ports detected
[    0.759521] nvme 0000:02:00.0: platform quirk: setting simple suspend
[    0.759577] nvme nvme0: pci function 0000:02:00.0
[    0.759660] xhci_hcd 0000:03:00.4: xHCI Host Controller
[    0.759668] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 3
[    0.759756] xhci_hcd 0000:03:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
[    0.760052] xhci_hcd 0000:03:00.4: xHCI Host Controller
[    0.760054] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 4
[    0.760055] xhci_hcd 0000:03:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[    0.760078] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    0.760080] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.760081] usb usb3: Product: xHCI Host Controller
[    0.760082] usb usb3: Manufacturer: Linux 5.15.0-60-generic xhci-hcd
[    0.760083] usb usb3: SerialNumber: 0000:03:00.4
[    0.760153] hub 3-0:1.0: USB hub found
[    0.760159] hub 3-0:1.0: 4 ports detected
[    0.760859] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.760875] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    0.760877] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.760878] usb usb4: Product: xHCI Host Controller
[    0.760879] usb usb4: Manufacturer: Linux 5.15.0-60-generic xhci-hcd
[    0.760880] usb usb4: SerialNumber: 0000:03:00.4
[    0.760938] hub 4-0:1.0: USB hub found
[    0.760943] hub 4-0:1.0: 2 ports detected
[    0.776739] nvme nvme0: allocated 32 MiB host memory buffer.
[    0.779022] nvme nvme0: 16/0/0 default/read/poll queues
[    0.782963]  nvme0n1: p1 p2
[    0.933308] input: GXTP7863:00 27C6:01E0 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-GXTP7863:00/0018:27C6:01E0.0001/input/input4
[    0.933372] input: GXTP7863:00 27C6:01E0 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-GXTP7863:00/0018:27C6:01E0.0001/input/input5
[    0.933415] hid-generic 0018:27C6:01E0.0001: input,hidraw0: I2C HID v1.00 Mouse [GXTP7863:00 27C6:01E0] on i2c-GXTP7863:00
[    0.944439] AMD-Vi: AMD IOMMUv2 loaded and initialized
[    1.058030] [drm] amdgpu kernel modesetting enabled.
[    1.065226] amdgpu: Virtual CRAT table created for CPU
[    1.065239] amdgpu: Topology: Add CPU node
[    1.065291] checking generic (fce0000000 7e9000) vs hw (fce0000000 10000000)
[    1.065389] amdgpu 0000:03:00.0: vgaarb: deactivate vga console
[    1.065452] amdgpu 0000:03:00.0: enabling device (0006 -> 0007)
[    1.065505] [drm] initializing kernel modesetting (RENOIR 0x1002:0x164C 0x152D:0x1413 0xC2).
[    1.065507] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled
[    1.065572] [drm] register mmio base: 0xD0500000
[    1.065573] [drm] register mmio size: 524288
[    1.065574] [drm] PCIE atomic ops is not supported
[    1.066647] [drm] add ip block number 0 <soc15_common>
[    1.066648] [drm] add ip block number 1 <gmc_v9_0>
[    1.066649] [drm] add ip block number 2 <vega10_ih>
[    1.066650] [drm] add ip block number 3 <psp>
[    1.066651] [drm] add ip block number 4 <smu>
[    1.066652] [drm] add ip block number 5 <gfx_v9_0>
[    1.066652] [drm] add ip block number 6 <sdma_v4_0>
[    1.066653] [drm] add ip block number 7 <dm>
[    1.066654] [drm] add ip block number 8 <vcn_v2_0>
[    1.066655] [drm] add ip block number 9 <jpeg_v2_0>
[    1.066669] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from VFCT
[    1.066671] amdgpu: ATOM BIOS: 113-LUCIENNE-016
[    1.066706] [drm] VCN decode is enabled in VM mode
[    1.066706] [drm] VCN encode is enabled in VM mode
[    1.066707] [drm] JPEG decode is enabled in VM mode
[    1.066730] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    1.066735] amdgpu 0000:03:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
[    1.066737] amdgpu 0000:03:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[    1.066738] amdgpu 0000:03:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[    1.066744] [drm] Detected VRAM RAM=512M, BAR=512M
[    1.066745] [drm] RAM width 128bits DDR4
[    1.066782] [drm] amdgpu: 512M of VRAM memory ready
[    1.066783] [drm] amdgpu: 3072M of GTT memory ready.
[    1.066787] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.066904] [drm] PCIE GART of 1024M enabled.
[    1.066905] [drm] PTB located at 0x000000F400900000
[    1.067084] amdgpu 0000:03:00.0: amdgpu: PSP runtime database doesn't exist
[    1.068086] [drm] Loading DMUB firmware via PSP: version=0x01010019
[    1.068197] [drm] Found VCN firmware Version ENC: 1.16 DEC: 5 VEP: 0 Revision: 3
[    1.068205] amdgpu 0000:03:00.0: amdgpu: Will use PSP to load VCN firmware
[    1.095341] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    1.099351] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[    1.320355] usb 1-2: New USB device found, idVendor=0b05, idProduct=190e, bcdDevice= 2.00
[    1.320363] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.320367] usb 1-2: Manufacturer: Realtei
[    1.320370] usb 1-2: SerialNumber: 00E04C239987
[    1.322564] usb 3-3: New USB device found, idVendor=27c6, idProduct=5125, bcdDevice= 2.00
[    1.322573] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.322577] usb 3-3: Product: Goodix Fingerprint Device 
[    1.322580] usb 3-3: Manufacturer: Shenzhen Goodix Technology Co.,Ltd.
[    1.322582] usb 3-3: SerialNumber: 00000000001A
[    1.358661] tsc: Refined TSC clocksource calibration: 2099.698 MHz
[    1.358672] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e441308c86, max_idle_ns: 440795202126 ns
[    1.735122] clocksource: Switched to clocksource tsc
[    1.754986] [drm] reserve 0x400000 from 0xf41f800000 for PSP TMR
[    1.793449] usb 1-3: new full-speed USB device number 3 using xhci_hcd
[    1.843919] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available
[    1.853307] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available
[    1.853311] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[    1.854650] amdgpu 0000:03:00.0: amdgpu: SMU is initialized successfully!
[    1.855992] [drm] kiq ring mec 2 pipe 1 q 0
[    1.856833] [drm] Display Core initialized with v3.2.149!
[    1.857278] [drm] DMUB hardware initialized: version=0x01010019
[    1.955562] usb 1-3: New USB device found, idVendor=1ea7, idProduct=0064, bcdDevice= 2.00
[    1.955573] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.955577] usb 1-3: Product: 2.4G Mouse
[    1.971013] input: 2.4G Mouse as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-3/1-3:1.0/0003:1EA7:0064.0002/input/input7
[    1.971249] input: 2.4G Mouse as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-3/1-3:1.0/0003:1EA7:0064.0002/input/input8
[    1.971596] hid-generic 0003:1EA7:0064.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:03:00.3-3/input0
[    1.971672] usbcore: registered new interface driver usbhid
[    1.971675] usbhid: USB HID core driver
[    2.023771] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[    2.023792] [drm] JPEG decode initialized successfully.
[    2.025477] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[    2.068515] memmap_init_zone_device initialised 131072 pages in 0ms
[    2.068529] amdgpu: HMM registered 512MB device memory
[    2.068581] amdgpu: SRAT table not found
[    2.068582] amdgpu: Virtual CRAT table created for GPU
[    2.068667] amdgpu: Topology: Add dGPU node [0x164c:0x1002]
[    2.068675] kfd kfd: amdgpu: added device 1002:164c
[    2.068808] amdgpu 0000:03:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 7
[    2.071857] [drm] fb mappable at 0x210CD2000
[    2.071864] [drm] vram apper at 0x210000000
[    2.071866] [drm] size 8294400
[    2.071868] [drm] fb depth is 24
[    2.071869] [drm]    pitch is 7680
[    2.072032] fbcon: amdgpudrmfb (fb0) is primary device
[    2.072036] fbcon: Deferring console take-over
[    2.072040] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[    2.089623] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[    2.105686] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
[    2.105697] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[    2.105701] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[    2.105704] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[    2.105706] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[    2.105709] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[    2.105712] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[    2.105714] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[    2.105717] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[    2.105720] amdgpu 0000:03:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[    2.105724] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1
[    2.105727] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1
[    2.105730] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1
[    2.105732] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1
[    2.105735] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1
[    2.107720] [drm] Initialized amdgpu 3.42.0 20150101 for 0000:03:00.0 on minor 0
[    2.129829] clocksource: timekeeping watchdog on CPU3: Marking clocksource 'tsc' as unstable because the skew is too large:
[    2.129839] clocksource:                       'hpet' wd_nsec: 513084344 wd_now: 2621599 wd_last: 1f1fc97 mask: ffffffff
[    2.129846] clocksource:                       'tsc' cs_nsec: 512196057 cs_now: 5d5a7122f cs_last: 5958ce65e mask: ffffffffffffffff
[    2.129851] clocksource:                       'tsc' is current clocksource.
[    2.129863] tsc: Marking TSC unstable due to clocksource watchdog
[    2.129877] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[    2.129879] sched_clock: Marking unstable (2130190967, -110095)<-(2874944937, -745068991)
[    2.130299] clocksource: Checking clocksource tsc synchronization from CPU 8 to CPUs 0,5-6,11.
[    2.130412] clocksource: Switched to clocksource hpet
[    2.246191] usb 1-4: New USB device found, idVendor=0408, idProduct=1042, bcdDevice= 0.03
[    2.246195] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.246196] usb 1-4: Product: HD Camera
[    2.246197] usb 1-4: Manufacturer: Quanta
[    2.246198] usb 1-4: SerialNumber: 0001
[    2.364784] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    2.468260] systemd[1]: Inserted module 'autofs4'
[    2.492828] systemd[1]: systemd 245.4-4ubuntu3.19 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.510021] systemd[1]: Detected architecture x86-64.
[    2.582724] systemd[1]: Set hostname to <marc-NMH-WCX9>.
[    2.583515] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
[    2.738883] systemd[1]: Created slice system-modprobe.slice.
[    2.739036] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.739188] systemd[1]: Created slice User and Session Slice.
[    2.739232] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.739347] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.739388] systemd[1]: Reached target User and Group Name Lookups.
[    2.739406] systemd[1]: Reached target Remote File Systems.
[    2.739421] systemd[1]: Reached target Slices.
[    2.739438] systemd[1]: Reached target Mounting snaps.
[    2.739524] systemd[1]: Listening on Syslog Socket.
[    2.739580] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.739615] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.739726] systemd[1]: Listening on Journal Audit Socket.
[    2.739778] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.739836] systemd[1]: Listening on Journal Socket.
[    2.739895] systemd[1]: Listening on udev Control Socket.
[    2.739948] systemd[1]: Listening on udev Kernel Socket.
[    2.740531] systemd[1]: Mounting Huge Pages File System...
[    2.741057] systemd[1]: Mounting POSIX Message Queue File System...
[    2.741726] systemd[1]: Mounting Kernel Debug File System...
[    2.742353] systemd[1]: Mounting Kernel Trace File System...
[    2.743289] systemd[1]: Starting Journal Service...
[    2.744005] systemd[1]: Starting Set the console keyboard layout...
[    2.744719] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    2.745391] systemd[1]: Starting Load Kernel Module chromeos_pstore...
[    2.745416] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[    2.746074] systemd[1]: Starting Load Kernel Module efi_pstore...
[    2.746643] systemd[1]: Starting Load Kernel Module pstore_blk...
[    2.747475] systemd[1]: Starting Load Kernel Module pstore_zone...
[    2.748371] systemd[1]: Starting Load Kernel Module ramoops...
[    2.748884] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    2.748928] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    2.750754] systemd[1]: Starting Load Kernel Modules...
[    2.751888] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.753318] systemd[1]: Starting udev Coldplug all Devices...
[    2.754643] pstore: Using crash dump compression: deflate
[    2.754655] pstore: Registered efi as persistent store backend
[    2.754746] systemd[1]: Starting Uncomplicated firewall...
[    2.756079] systemd[1]: Mounted Huge Pages File System.
[    2.756328] systemd[1]: Mounted POSIX Message Queue File System.
[    2.756463] systemd[1]: Mounted Kernel Debug File System.
[    2.756573] systemd[1]: Mounted Kernel Trace File System.
[    2.756906] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    2.757259] systemd[1]: modprobe@efi_pstore.service: Succeeded.
[    2.757590] systemd[1]: Finished Load Kernel Module efi_pstore.
[    2.757829] systemd[1]: modprobe@pstore_blk.service: Succeeded.
[    2.758111] systemd[1]: Finished Load Kernel Module pstore_blk.
[    2.758276] systemd[1]: modprobe@pstore_zone.service: Succeeded.
[    2.758487] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[    2.758553] systemd[1]: Finished Load Kernel Module pstore_zone.
[    2.759363] systemd[1]: modprobe@ramoops.service: Succeeded.
[    2.759665] systemd[1]: Finished Load Kernel Module ramoops.
[    2.760109] systemd[1]: Finished Remount Root and Kernel File Systems.
[    2.760584] systemd[1]: Finished Uncomplicated firewall.
[    2.761285] lp: driver loaded but no devices found
[    2.761831] systemd[1]: Activating swap /swapfile...
[    2.762582] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    2.763532] systemd[1]: Starting Load/Save Random Seed...
[    2.763899] ppdev: user-space parallel port driver
[    2.764807] systemd[1]: Starting Create System Users...
[    2.765710] Adding 2097148k swap on /swapfile.  Priority:-2 extents:19 across:232914944k SSFS
[    2.765798] systemd[1]: Activated swap /swapfile.
[    2.765922] systemd[1]: Reached target Swap.
[    2.769940] systemd[1]: Finished Load/Save Random Seed.
[    2.771107] systemd[1]: Finished Load Kernel Modules.
[    2.771913] systemd[1]: Mounting FUSE Control File System...
[    2.772600] systemd[1]: Mounting Kernel Configuration File System...
[    2.773288] systemd[1]: Starting Apply Kernel Variables...
[    2.774080] systemd[1]: Mounted FUSE Control File System.
[    2.775063] systemd[1]: Mounted Kernel Configuration File System.
[    2.775631] systemd[1]: Finished Create System Users.
[    2.776638] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.781756] systemd[1]: Finished Set the console keyboard layout.
[    2.784199] systemd[1]: Finished Create Static Device Nodes in /dev.
[    2.784328] systemd[1]: Reached target Local File Systems (Pre).
[    2.786899] systemd[1]: Mounting Mount unit for bare, revision 5...
[    2.787794] systemd[1]: Mounting Mount unit for core18, revision 2697...
[    2.788649] systemd[1]: Mounting Mount unit for gnome-3-28-1804, revision 161...
[    2.789768] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1535...
[    2.790203] loop0: detected capacity change from 0 to 113888
[    2.790949] systemd[1]: Mounting Mount unit for raindrop, revision 7...
[    2.791894] systemd[1]: Mounting Mount unit for snapd, revision 18357...
[    2.792721] systemd[1]: Starting udev Kernel Device Manager...
[    2.798411] systemd[1]: Started Journal Service.
[    2.803509] systemd-journald[368]: Received client request to flush runtime journal.
[    2.834019] loop1: detected capacity change from 0 to 8
[    2.834162] loop2: detected capacity change from 0 to 102072
[    2.877946] loop3: detected capacity change from 0 to 337424
[    2.878071] loop4: detected capacity change from 0 to 187776
[    2.897811] loop5: detected capacity change from 0 to 149384
[    3.038243] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.038427] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.079171] ccp 0000:03:00.2: enabling device (0000 -> 0002)
[    3.079368] ccp 0000:03:00.2: ccp: unable to access the device: you might be running a broken BIOS.
[    3.081433] snd_rn_pci_acp3x 0000:03:00.5: enabling device (0000 -> 0002)
[    3.089521] ccp 0000:03:00.2: tee enabled
[    3.089527] ccp 0000:03:00.2: psp enabled
[    3.107006] ath11k_pci 0000:01:00.0: BAR 0: assigned [mem 0xd0000000-0xd01fffff 64bit]
[    3.107026] ath11k_pci 0000:01:00.0: enabling device (0000 -> 0002)
[    3.108384] ath11k_pci 0000:01:00.0: wcn6855 hw2.0
[    3.111975] mc: Linux media interface: v0.10
[    3.113716] NET: Registered PF_QIPCRTR protocol family
[    3.118494] videodev: Linux video capture interface: v2.00
[    3.168844] mhi mhi0: Requested to power ON
[    3.168988] mhi mhi0: Power on setup success
[    3.189125] input: Huawei WMI hotkeys as /devices/platform/huawei-wmi/input/input9
[    3.190423] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[    3.190427] RAPL PMU: hw unit of domain package 2^-16 Joules
[    3.196446] cryptd: max_cpu_qlen set to 1000
[    3.198490] snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002)
[    3.198869] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
[    3.199228] snd_hda_intel 0000:03:00.6: enabling device (0000 -> 0002)
[    3.204324] AVX2 version of gcm_enc/dec engaged.
[    3.204626] AES CTR mode by8 optimization enabled
[    3.209452] snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    3.210540] usb 1-4: Found UVC 1.10 device HD Camera (0408:1042)
[    3.235477] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input10
[    3.241528] input: HD Camera: HD Camera as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-4/1-4:1.0/input/input11
[    3.263555] snd_hda_codec_generic hdaudioC1D0: autoconfig for Generic: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    3.263572] snd_hda_codec_generic hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.263574] snd_hda_codec_generic hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[    3.263577] snd_hda_codec_generic hdaudioC1D0:    mono: mono_out=0x0
[    3.263578] snd_hda_codec_generic hdaudioC1D0:    inputs:
[    3.263580] snd_hda_codec_generic hdaudioC1D0:      Internal Mic=0x1a
[    3.263582] snd_hda_codec_generic hdaudioC1D0:      Mic=0x19
[    3.272914] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input12
[    3.275224] kvm: Nested Virtualization enabled
[    3.275228] SVM: kvm: Nested Paging enabled
[    3.275243] SVM: Virtual VMLOAD VMSAVE supported
[    3.275243] SVM: Virtual GIF supported
[    3.280276] usbcore: registered new interface driver uvcvideo
[    3.280327] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input13
[    3.281229] ACPI: battery: new extension: Huawei Battery Extension
[    3.294732] MCE: In-kernel MCE decoding enabled.
[    3.358452] input: GXTP7863:00 27C6:01E0 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-GXTP7863:00/0018:27C6:01E0.0001/input/input14
[    3.358702] input: GXTP7863:00 27C6:01E0 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-GXTP7863:00/0018:27C6:01E0.0001/input/input15
[    3.358897] hid-multitouch 0018:27C6:01E0.0001: input,hidraw0: I2C HID v1.00 Mouse [GXTP7863:00 27C6:01E0] on i2c-GXTP7863:00
[    3.409534] intel_rapl_common: Found RAPL domain package
[    3.409540] intel_rapl_common: Found RAPL domain core
[    3.537705] mhi mhi0: Wait for device to enter SBL or Mission mode
[    3.827104] audit: type=1400 audit(1677960622.909:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=623 comm="apparmor_parser"
[    3.827182] audit: type=1400 audit(1677960622.909:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=615 comm="apparmor_parser"
[    3.827313] audit: type=1400 audit(1677960622.909:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=617 comm="apparmor_parser"
[    3.827586] audit: type=1400 audit(1677960622.909:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=621 comm="apparmor_parser"
[    3.828168] audit: type=1400 audit(1677960622.909:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=622 comm="apparmor_parser"
[    3.828176] audit: type=1400 audit(1677960622.909:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=622 comm="apparmor_parser"
[    3.828225] audit: type=1400 audit(1677960622.909:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=624 comm="apparmor_parser"
[    3.828894] audit: type=1400 audit(1677960622.909:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=620 comm="apparmor_parser"
[    3.828902] audit: type=1400 audit(1677960622.909:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=620 comm="apparmor_parser"
[    4.201797] ath11k_pci 0000:01:00.0: chip_id 0x12 chip_family 0xb board_id 0xff soc_id 0x400c1211
[    4.201803] ath11k_pci 0000:01:00.0: fw_version 0x11090c35 fw_build_timestamp 2022-04-18 20:23 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9
[    4.510680] ath11k_pci 0000:01:00.0 wlp1s0: renamed from wlan0
[    4.786376] loop6: detected capacity change from 0 to 8
[    6.824021] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[    6.928300] rfkill: input handler disabled
[    8.307581] wlp1s0: authenticate with 14:0c:76:54:69:b0
[    8.449302] wlp1s0: send auth to 14:0c:76:54:69:b0 (try 1/3)
[    8.461804] wlp1s0: authenticated
[    8.465900] wlp1s0: associate with 14:0c:76:54:69:b0 (try 1/3)
[    8.472074] wlp1s0: RX AssocResp from 14:0c:76:54:69:b0 (capab=0x1411 status=0 aid=1)
[    8.486879] wlp1s0: associated
[    8.594779] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[   10.150125] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[   10.150137] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[   10.223171] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[   10.223181] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[   13.210572] rfkill: input handler enabled
[   14.853074] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[   15.526016] rfkill: input handler disabled
[   19.869798] pcieport 0000:00:08.1: PME: Spurious native interrupt!

Nuliel

Re : [Résolu] probleme bluetooth

Alors les messages utiles:

[    0.023597] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-60-generic", will be passed to user space.
secure boot actif
[    0.760859] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.

Le secure boot est activé, et empêche le chargement de pilotes non signés. A mon avis il faudrait désactiver le secure boot dans le BIOS et voir si ça marche mieux (et peut-être réinstaller le pilote à nouveau, mais avec le secure boot désactivé)

---

[ poster un retour de commande ] [ poster une photo ]

surhimy

Re : [Résolu] probleme bluetooth

Malheureusement, en désactivant simplement le secure-boot cela ne marche toujours pas.
Pourriez-vous me montrer la marche à suivre pour désinstaller le firmware puis le réinstaller.
Merci d'avance

Nuliel

Re : [Résolu] probleme bluetooth

Le firmware on y touche pas, par contre le pilote on va le réinstaller (parce que j'imagine que tu as déjà essayé de l'installer, mais sur un ancien noyau)
Faut que je me renseigne sur le pilote à installer, je pense que celui du mpow n'est plus assez récent.

---

[ poster un retour de commande ] [ poster une photo ]