Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1 2

#1 Le 22/11/2023, à 10:08

zebone

HDD inaccessible

bonjour à tous ,  depuis   une serie de coupure  de courant  chez moi  , mon  disque dur  HDD  de  données est  non reconnu  au  demarrage  avec  le  message  suivant :
" dev/sdb unable to read RDB block:
je comprend  qu'il  y  a du  avoir  des  anomalies  sur le  MBR ?  dans  GRUB ?
bref  je  ne suis pas  capable de m'en tirer  seul
auriez vous  une  solution  à  me  proposer ?
dois-jeme loguer  en  root ? ou en  administrateur  simple ?
je  suis  sous  ubuntu 22.04.3 LTS,  mon  disque  systeme  est  un  SSD et  j'ai  deux  disques  de  données : sdb = 3To invisible et sdc =1 To lui accessible

Hors ligne

#2 Le 22/11/2023, à 10:31

geole

Re : HDD inaccessible

Bonjour.
C'est certainement plus grave que tu le penses.

Root Cause. The Dev sdx: unable to read RDB block 0 message indicates the system is not able to pull the Rigid Disk Block (RDB) information from the disk. The RDB stores disk's geometry (cylinders, heads, sectors) and partitioning information.

Donne ces retours.

sudo fdisk -l /dev/sdb
journalctl -g sdb | tail -30

Tu vas installer le logiciel smartmontools et publier l'état du disque.

sudo smartctl -s on  -a /dev/sdb

Dernière modification par geole (Le 22/11/2023, à 10:38)

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#3 Le 22/11/2023, à 11:39

zebone

Re : HDD inaccessible

reponse aux  tests a écrit :

administrateur@francois-B250M-DS3H:~/Bureau$ sudo fdisk -l /dev/sdb
[sudo] Mot de passe de administrateur :
fdisk: impossible d'ouvrir /dev/sdb: Aucun fichier ou dossier de ce type
administrateur@francois-B250M-DS3H:~/Bureau$ journalctl -g sdb | tail -30
Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
nov. 22 10:28:41 francois-B250M-DS3H sudo[64287]: administrateur : TTY=pts/1 ; PWD=/home/administrateur/Bureau ; USER=root ; COMMAND=/usr/sbin/fdisk -l /dev/sdb
administrateur@francois-B250M-DS3H:~/Bureau$ sudo smartctl -s on  -a /dev/sdb
sudo: smartctl : commande introuvable
administrateur@francois-B250M-DS3H:~/Bureau$ sudo smartctl --smart=on --offlineauto=on --saveauto=on /dev/sdb
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.2.0-36-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

Short INQUIRY response, skip product id
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
administrateur@francois-B250M-DS3H:~/Bureau$

Hors ligne

#4 Le 22/11/2023, à 11:43

zebone

Re : HDD inaccessible

juste une  question  dois-je  eteindre la  machine  , l'ouvrir  et  verifier  les connexions

Hors ligne

#5 Le 22/11/2023, à 11:44

xubu1957

Re : HDD inaccessible

Bonjour,

Pour ajouter toi-même les balises code (au lieu des balises de citation), à ton précédent message #3 :

  • Cliquer sur le lien « Modifier » en bas à droite du message

  • Sélectionner le texte

  • Cliquer sur le <> de l'éditeur de message

moko138 a écrit :

1) Les balises-code sont les < > (crochets bleus) de la barre de mise en forme.
Balisesmoko138.jpg
_ _ _

3) /!\  Si vous avez plusieurs retours à donner, séparez-les bien (toujours pour la lisibilité) :

comme
cela.

comme indiqué dans le : Retour utilisable de commande

administrateur@francois-B250M-DS3H:~/Bureau$ sudo fdisk -l /dev/sdb
[sudo] Mot de passe de administrateur :
fdisk: impossible d'ouvrir /dev/sdb: Aucun fichier ou dossier de ce type
administrateur@francois-B250M-DS3H:~/Bureau$ journalctl -g sdb | tail -30
Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
nov. 22 10:28:41 francois-B250M-DS3H sudo[64287]: administrateur : TTY=pts/1 ; PWD=/home/administrateur/Bureau ; USER=root ; COMMAND=/usr/sbin/fdisk -l /dev/sdb
administrateur@francois-B250M-DS3H:~/Bureau$ sudo smartctl -s on  -a /dev/sdb
sudo: smartctl : commande introuvable
administrateur@francois-B250M-DS3H:~/Bureau$ sudo smartctl --smart=on --offlineauto=on --saveauto=on /dev/sdb
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.2.0-36-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

Short INQUIRY response, skip product id
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
administrateur@francois-B250M-DS3H:~/Bureau$

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#6 Le 22/11/2023, à 12:06

zebone

Re : HDD inaccessible

oups  désolé  de  ne  pas être très  performant  dans le  forum 
je  vais refaire    la derniere commande mais  on  me  demande  d'ajouter  un  attribut  ( lettre  ) pour  preciser . que  dois-je choisir

Hors ligne

#7 Le 22/11/2023, à 12:13

xubu1957

Re : HDD inaccessible

Tente :

sudo smartctl -s on  -a /dev/sdb1

Lecture conseillée > memento des balises code.

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#8 Le 22/11/2023, à 13:27

zebone

Re : HDD inaccessible

voici  le  resultat  de  la derniere  ligne  de  commande  :

  <pre><font color="#26A269"><b>administrateur@francois-B250M-DS3H</b></font>:<font color="#12488B"><b>~/Bureau</b></font>$ sudo smartctl -s on  -a /dev/sdb1
[sudo] Mot de passe de administrateur : 
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.2.0-36-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

Smartctl open device: /dev/sdb1 failed: No such device
</pre>

Hors ligne

#9 Le 22/11/2023, à 13:30

zebone

Re : HDD inaccessible

je  comprend que le  disque dur  n'est  pas ou n'existe  pas pour  le systeme d'exploitation  ,  je vais  donc  arreter  la  machine  , l'ouvrir  et  verifier  la  connectique   et  je  vous  tiens au  courant

Hors ligne

#10 Le 22/11/2023, à 13:50

zebone

Re : HDD inaccessible

me revoila, j'ai interverti les  disques durs pour voir  si  la connectique  etait  responsable :
cette fois  ci  c'est  sdc qui  est  en  erreur  avec  un info  pendant  le  demarrage  de la  machien 

  buffer I/O  erreur  sur sdc

le  disque dur  est mal en point ?
merci  de  vos  éclairages

Hors ligne

#11 Le 22/11/2023, à 14:01

geole

Re : HDD inaccessible

redonne

sudo journalctl -g sdc| tail -30

Ainsi que

sudo smartctl -s on -T verypermissive -a /dev/sdc

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#12 Le 22/11/2023, à 14:04

zebone

Re : HDD inaccessible

lorsque  je  lance  Disques   dans  la  liste  il y  a  mmon disque  systeme en  dessous  mon  disque HD = sdb maintenant puis  un hard  disk = sdc mais  son  modele  et sa taille  sont non mentionnés et  sur  l'engrenage   en dessous  du  volume  la seule ligne  qui  est  active   est  : modifier  les  options de montage .toutes  les  autres lignes  sont grisées .

Hors ligne

#13 Le 22/11/2023, à 14:10

zebone

Re : HDD inaccessible

 dministrateur@francois-B250M-DS3H:~/Bureau$ sudo journalctl -g sdc| tail -30 
[sudo] Mot de passe de administrateur : 
Unknown SIGBUS page, aborting.
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#4 CDB: Read(10) 28 00 00 00 00 04 00 00 02 00
nov. 22 12:44:33 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 4 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 2, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=12s
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#5 CDB: Read(10) 28 00 00 00 00 02 00 00 02 00
nov. 22 12:44:33 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 2 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 1, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=12s
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#6 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
nov. 22 12:44:33 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 0, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=12s
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#7 CDB: Read(10) 28 00 00 00 00 06 00 00 02 00
nov. 22 12:44:33 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 6 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 3, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#13 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#13 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
nov. 22 12:44:33 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 4 prio class 2
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 0, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 1, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 2, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 3, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#14 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
nov. 22 12:44:33 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 4 prio class 2
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 0, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 1, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#14 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
nov. 22 12:44:33 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flag

Hors ligne

#14 Le 22/11/2023, à 14:12

zebone

Re : HDD inaccessible

  administrateur@francois-B250M-DS3H:~/Bureau$ sudo smartctl -s on -T verypermissive -a /dev/sdcissive -a /dev/sdc
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.2.0-37-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

Short INQUIRY response, skip product id

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
unable to fetch IEC (SMART) mode page [scsi response fails sanity test]

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Read defect list: asked for grown list but didn't get it
Error Counter logging not supported

Device does not support Self Test logging

Hors ligne

#15 Le 22/11/2023, à 14:13

geole

Re : HDD inaccessible

Pour le moment, laisse donc tomber les commandes classiques qui ne fonctionnent que sur des disques en bon état
Et prépare-toi à rechercher un réparateur de disque capable de remplacer la pièce qui à cramé car je suppose que tu n'as pas de double du contenu de ce disque.

Dans le forum on cite RMY
Il n'est pas certain que je sache te faire retrouver la géographie virtuelle de ce disque dont je ne sais rien. Tu peux toujours commencer à installer tesdisk et lire sa documentation.

Dernière modification par geole (Le 22/11/2023, à 14:20)

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#16 Le 22/11/2023, à 14:24

geole

Re : HDD inaccessible

Je n'ai pas demandé suffisamment.

sudo journalctl -g sdc| tail -300
sudo journalctl --no-pager  -b -p err

Dernière modification par geole (Le 22/11/2023, à 16:10)

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#17 Le 22/11/2023, à 14:46

nany

Re : HDD inaccessible

Bonjour,



geole a écrit :

Dans le forum on cite RMY

Cette page de doc est un peu vieillotte (pas sûr que le mail de contact soit encore valable).
Il vaut mieux aller voir son profil du forum où on peut trouver dans sa signature :
« mon site pro pour les particuliers : www.diskcard.fr ».

Le mot de passe sudo ne s'affiche pas - Comment bien utiliser les balises BBcode
Retour aux sources.
Urtikan.net - https://youtu.be/2uznaTjvb7I
LIBRARIES ARE NOT BOOK-STORES!

Hors ligne

#18 Le 22/11/2023, à 15:43

zebone

Re : HDD inaccessible

geole  à écrit : j
e n'ai pas demandé suffisamment.

sudo journalctl -g sdc| tail -300

  administrateur@francois-B250M-DS3H:~/Bureau$ sudo journalctl -g sdc| tail -300
[sudo] Mot de passe de administrateur : 
Unknown SIGBUS page, aborting.
août 27 10:28:35 francois-B250M-DS3H kernel: EXT4-fs (sdc1): mounted filesystem 904083d6-7ddd-4ec0-a8dd-515d28e9e581 with ordered data mode. Quota mode: none.
août 27 10:29:03 francois-B250M-DS3H udisksd[1350]: Mounted /dev/sdc1 at /media/franc/904083d6-7ddd-4ec0-a8dd-515d28e9e581 on behalf of uid 1003
août 27 10:30:04 francois-B250M-DS3H systemd-udevd[546]: sdc1: Worker [5381] processing SEQNUM=4623 is taking a long time
-- Boot 2f723ed74a38428b9c1f4874e1ab4e67 --
août 28 07:23:05 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
août 28 07:23:05 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write Protect is off
août 28 07:23:05 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
août 28 07:23:05 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
août 28 07:23:05 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
août 28 07:23:05 francois-B250M-DS3H kernel:  sdc: sdc1
août 28 07:23:05 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
août 28 07:23:09 francois-B250M-DS3H systemd-udevd[567]: sdc: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc' failed with exit code 1.
août 28 07:23:09 francois-B250M-DS3H systemd-udevd[569]: sdc1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc1' failed with exit code 1.
-- Boot cf13b460ade74e74b196ef59941c9e0b --
août 29 07:15:40 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
août 29 07:15:40 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write Protect is off
août 29 07:15:40 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
août 29 07:15:40 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
août 29 07:15:40 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
août 29 07:15:40 francois-B250M-DS3H kernel:  sdc: sdc1
août 29 07:15:40 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
août 29 07:15:44 francois-B250M-DS3H systemd-udevd[567]: sdc: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc' failed with exit code 1.
août 29 07:15:44 francois-B250M-DS3H systemd-udevd[559]: sdc1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc1' failed with exit code 1.
-- Boot 7d681cdbe43847fc840c93c3b86b5faa --
sept. 06 17:31:19 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sept. 06 17:31:19 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write Protect is off
sept. 06 17:31:19 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sept. 06 17:31:19 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sept. 06 17:31:19 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
sept. 06 17:31:19 francois-B250M-DS3H kernel:  sdc: sdc1
sept. 06 17:31:19 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
sept. 06 17:31:20 francois-B250M-DS3H systemd-udevd[550]: sdc: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc' failed with exit code 1.
sept. 06 17:31:20 francois-B250M-DS3H systemd-udevd[520]: sdc1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc1' failed with exit code 1.
-- Boot f1b31ae4d1f2454eb895aa3c23467191 --
sept. 17 09:01:01 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sept. 17 09:01:01 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write Protect is off
sept. 17 09:01:01 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sept. 17 09:01:01 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sept. 17 09:01:01 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
sept. 17 09:01:01 francois-B250M-DS3H kernel:  sdc: sdc1
sept. 17 09:01:01 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
sept. 17 09:01:06 francois-B250M-DS3H systemd-udevd[556]: sdc: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc' failed with exit code 1.
sept. 17 09:01:06 francois-B250M-DS3H systemd-udevd[569]: sdc1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc1' failed with exit code 1.
-- Boot 2a50ccbcd9e94e8db90a29973229c53c --
sept. 17 19:17:41 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sept. 17 19:17:41 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write Protect is off
sept. 17 19:17:41 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sept. 17 19:17:41 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sept. 17 19:17:41 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
sept. 17 19:17:41 francois-B250M-DS3H kernel:  sdc: sdc1
sept. 17 19:17:41 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
sept. 17 19:17:47 francois-B250M-DS3H systemd-udevd[570]: sdc: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc' failed with exit code 1.
sept. 17 19:17:48 francois-B250M-DS3H systemd-udevd[575]: sdc1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc1' failed with exit code 1.
-- Boot 76061853b43e41df921e11e6f4d3513a --
sept. 17 19:22:48 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sept. 17 19:22:48 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write Protect is off
sept. 17 19:22:48 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sept. 17 19:22:48 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sept. 17 19:22:48 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
sept. 17 19:22:48 francois-B250M-DS3H kernel:  sdc: sdc1
sept. 17 19:22:48 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
sept. 17 19:22:55 francois-B250M-DS3H systemd-udevd[575]: sdc: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc' failed with exit code 1.
sept. 17 19:22:55 francois-B250M-DS3H systemd-udevd[555]: sdc1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc1' failed with exit code 1.
-- Boot 58d4531eec244205a7a69380dc95fdcc --
sept. 17 19:46:17 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sept. 17 19:46:17 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write Protect is off
sept. 17 19:46:17 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sept. 17 19:46:17 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sept. 17 19:46:17 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
sept. 17 19:46:17 francois-B250M-DS3H kernel:  sdc: sdc1
sept. 17 19:46:17 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
sept. 17 19:46:18 francois-B250M-DS3H systemd-udevd[553]: sdc: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc' failed with exit code 1.
sept. 17 19:46:18 francois-B250M-DS3H systemd-udevd[553]: sdc1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc1' failed with exit code 1.
-- Boot 6750569342e04f2bbbcd618b24891242 --
oct. 03 19:15:12 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
oct. 03 19:15:12 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write Protect is off
oct. 03 19:15:12 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
oct. 03 19:15:12 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
oct. 03 19:15:12 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
oct. 03 19:15:12 francois-B250M-DS3H kernel:  sdc: sdc1
oct. 03 19:15:12 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
oct. 03 19:15:13 francois-B250M-DS3H systemd-udevd[559]: sdc: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc' failed with exit code 1.
oct. 03 19:15:13 francois-B250M-DS3H systemd-udevd[559]: sdc1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc1' failed with exit code 1.
-- Boot fa871270f1b446d9816fe0b3bf42b3f2 --
oct. 04 07:55:18 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
oct. 04 07:55:18 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write Protect is off
oct. 04 07:55:18 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
oct. 04 07:55:18 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
oct. 04 07:55:18 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
oct. 04 07:55:18 francois-B250M-DS3H kernel:  sdc: sdc1
oct. 04 07:55:18 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
oct. 04 07:55:19 francois-B250M-DS3H systemd-udevd[550]: sdc: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc' failed with exit code 1.
oct. 04 07:55:19 francois-B250M-DS3H systemd-udevd[550]: sdc1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc1' failed with exit code 1.
-- Boot 26b273da55eb4c27825daa55a347f73b --
oct. 12 22:05:26 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
oct. 12 22:05:26 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write Protect is off
oct. 12 22:05:26 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
oct. 12 22:05:26 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
oct. 12 22:05:26 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
oct. 12 22:05:26 francois-B250M-DS3H kernel:  sdc: sdc1
oct. 12 22:05:26 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
oct. 12 22:05:26 francois-B250M-DS3H systemd-udevd[495]: sdc: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc' failed with exit code 1.
oct. 12 22:05:27 francois-B250M-DS3H systemd-udevd[481]: sdc1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc1' failed with exit code 1.
-- Boot 6fef8180cb6a4dd3860d4717e909fb63 --
oct. 12 22:08:23 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
oct. 12 22:08:23 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write Protect is off
oct. 12 22:08:23 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
oct. 12 22:08:23 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
oct. 12 22:08:23 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
oct. 12 22:08:23 francois-B250M-DS3H kernel:  sdc: sdc1
oct. 12 22:08:23 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
oct. 12 22:08:24 francois-B250M-DS3H systemd-udevd[553]: sdc: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc' failed with exit code 1.
oct. 12 22:08:24 francois-B250M-DS3H systemd-udevd[549]: sdc1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc1' failed with exit code 1.
-- Boot 42258bd30dbc4b4dab9f287c846a523a --
oct. 23 16:55:05 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
oct. 23 16:55:05 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write Protect is off
oct. 23 16:55:05 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
oct. 23 16:55:05 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
oct. 23 16:55:05 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
oct. 23 16:55:05 francois-B250M-DS3H kernel:  sdc: sdc1
oct. 23 16:55:05 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
oct. 23 16:55:07 francois-B250M-DS3H systemd-udevd[487]: sdc: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc' failed with exit code 1.
oct. 23 16:55:07 francois-B250M-DS3H systemd-udevd[487]: sdc1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc1' failed with exit code 1.
-- Boot 44e79c3429a14f41800be032b0fe71dc --
oct. 31 07:19:09 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
oct. 31 07:19:09 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write Protect is off
oct. 31 07:19:09 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
oct. 31 07:19:09 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
oct. 31 07:19:09 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
oct. 31 07:19:09 francois-B250M-DS3H kernel:  sdc: sdc1
oct. 31 07:19:09 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
oct. 31 07:19:10 francois-B250M-DS3H systemd-udevd[513]: sdc: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc' failed with exit code 1.
oct. 31 07:19:10 francois-B250M-DS3H systemd-udevd[508]: sdc1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc1' failed with exit code 1.
-- Boot f9695806974c41a5ab90dde40f7291e8 --
oct. 31 07:21:11 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
oct. 31 07:21:11 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write Protect is off
oct. 31 07:21:11 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
oct. 31 07:21:11 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
oct. 31 07:21:11 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
oct. 31 07:21:11 francois-B250M-DS3H kernel:  sdc: sdc1
oct. 31 07:21:11 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
oct. 31 07:21:12 francois-B250M-DS3H systemd-udevd[510]: sdc: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc' failed with exit code 1.
oct. 31 07:21:12 francois-B250M-DS3H systemd-udevd[512]: sdc1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc1' failed with exit code 1.
nov. 19 20:03:00 francois-B250M-DS3H kernel: EXT4-fs (sdc1): recovery complete
nov. 19 20:03:01 francois-B250M-DS3H kernel: EXT4-fs (sdc1): mounted filesystem 904083d6-7ddd-4ec0-a8dd-515d28e9e581 with ordered data mode. Quota mode: none.
nov. 19 20:03:01 francois-B250M-DS3H udisksd[1293]: Mounted /dev/sdc1 at /media/francois/904083d6-7ddd-4ec0-a8dd-515d28e9e581 on behalf of uid 1000
nov. 19 21:21:09 francois-B250M-DS3H kernel: EXT4-fs (sdc1): unmounting filesystem 904083d6-7ddd-4ec0-a8dd-515d28e9e581.
-- Boot f3c0c29f921d4d31984d2f1348579a88 --
nov. 19 21:23:09 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
nov. 19 21:23:09 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write Protect is off
nov. 19 21:23:09 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
nov. 19 21:23:09 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
nov. 19 21:23:09 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
nov. 19 21:23:09 francois-B250M-DS3H kernel:  sdc: sdc1
nov. 19 21:23:09 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
nov. 19 21:23:11 francois-B250M-DS3H systemd-udevd[500]: sdc: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc' failed with exit code 1.
nov. 19 21:23:11 francois-B250M-DS3H systemd-udevd[500]: sdc1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc1' failed with exit code 1.
-- Boot de1d73060d3f403daca1d6773e6c557f --
nov. 19 21:59:13 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
nov. 19 21:59:13 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write Protect is off
nov. 19 21:59:13 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
nov. 19 21:59:13 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
nov. 19 21:59:13 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
nov. 19 21:59:13 francois-B250M-DS3H kernel:  sdc: sdc1
nov. 19 21:59:13 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
nov. 19 21:59:15 francois-B250M-DS3H systemd-udevd[523]: sdc: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc' failed with exit code 1.
nov. 19 21:59:15 francois-B250M-DS3H systemd-udevd[510]: sdc1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc1' failed with exit code 1.
-- Boot 6e0554326dce4ab18bd588ed06ce74b7 --
nov. 20 07:34:06 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
nov. 20 07:34:06 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write Protect is off
nov. 20 07:34:06 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
nov. 20 07:34:06 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
nov. 20 07:34:06 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
nov. 20 07:34:06 francois-B250M-DS3H kernel:  sdc: sdc1
nov. 20 07:34:06 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
nov. 20 07:34:07 francois-B250M-DS3H systemd-udevd[501]: sdc: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc' failed with exit code 1.
nov. 20 07:34:07 francois-B250M-DS3H systemd-udevd[501]: sdc1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc1' failed with exit code 1.
nov. 22 08:23:56 francois-B250M-DS3H kernel:  sdc: sdc1
nov. 22 08:23:59 francois-B250M-DS3H systemd-udevd[61583]: sdc1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc1' failed with exit code 1.
nov. 22 10:32:56 francois-B250M-DS3H smartd[64592]: Device: /dev/sdc, type changed from 'scsi' to 'sat'
nov. 22 10:32:56 francois-B250M-DS3H smartd[64592]: Device: /dev/sdc [SAT], opened
nov. 22 10:32:56 francois-B250M-DS3H smartd[64592]: Device: /dev/sdc [SAT], WDC WD10EADS-00M2B0, S/N:WD-WMAV50722716, WWN:5-0014ee-001f39ea3, FW:01.00A01, 1.00 TB
nov. 22 10:32:56 francois-B250M-DS3H smartd[64592]: Device: /dev/sdc [SAT], found in smartd database: Western Digital Caviar Green
nov. 22 10:32:59 francois-B250M-DS3H smartd[64592]: Device: /dev/sdc [SAT], is SMART capable. Adding to "monitor" list.
nov. 22 10:33:02 francois-B250M-DS3H smartd[64592]: Device: /dev/sdc [SAT], 1318 Currently unreadable (pending) sectors
nov. 22 10:33:02 francois-B250M-DS3H smartd[64592]: Device: /dev/sdc [SAT], 685 Offline uncorrectable sectors
nov. 22 10:33:04 francois-B250M-DS3H smartd[64592]: Device: /dev/sdc [SAT], state written to /var/lib/smartmontools/smartd.WDC_WD10EADS_00M2B0-WD_WMAV50722716.ata.state
nov. 22 11:03:05 francois-B250M-DS3H smartd[64592]: Device: /dev/sdc [SAT], 1318 Currently unreadable (pending) sectors
nov. 22 11:03:05 francois-B250M-DS3H smartd[64592]: Device: /dev/sdc [SAT], 685 Offline uncorrectable sectors
nov. 22 11:33:07 francois-B250M-DS3H smartd[64592]: Device: /dev/sdc [SAT], 1318 Currently unreadable (pending) sectors
nov. 22 11:33:07 francois-B250M-DS3H smartd[64592]: Device: /dev/sdc [SAT], 685 Offline uncorrectable sectors
nov. 22 12:03:06 francois-B250M-DS3H smartd[64592]: Device: /dev/sdc [SAT], 1318 Currently unreadable (pending) sectors
nov. 22 12:03:06 francois-B250M-DS3H smartd[64592]: Device: /dev/sdc [SAT], 685 Offline uncorrectable sectors
nov. 22 12:31:39 francois-B250M-DS3H smartd[64592]: Device: /dev/sdc [SAT], state written to /var/lib/smartmontools/smartd.WDC_WD10EADS_00M2B0-WD_WMAV50722716.ata.state
-- Boot 261d93f680844ffe9348555a97ddb20f --
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 8089950 512-byte logical blocks: (4.14 GB/3.86 GiB)
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write Protect is off
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#4 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=12s
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#4 CDB: Read(10) 28 00 00 00 00 04 00 00 02 00
nov. 22 12:44:33 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 4 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 2, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=12s
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#5 CDB: Read(10) 28 00 00 00 00 02 00 00 02 00
nov. 22 12:44:33 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 2 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 1, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=12s
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#6 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
nov. 22 12:44:33 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 0, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=12s
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#7 CDB: Read(10) 28 00 00 00 00 06 00 00 02 00
nov. 22 12:44:33 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 6 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 3, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#13 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#13 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
nov. 22 12:44:33 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 4 prio class 2
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 0, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 1, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 2, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 3, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#14 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
nov. 22 12:44:33 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 4 prio class 2
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 0, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 1, async page read
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#14 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
nov. 22 12:44:33 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#15 CDB: Read(10) 28 00 00 00 00 02 00 00 02 00
nov. 22 12:44:33 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 2 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#16 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#16 CDB: Read(10) 28 00 00 00 00 04 00 00 02 00
nov. 22 12:44:33 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 4 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#17 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#17 CDB: Read(10) 28 00 00 00 00 06 00 00 02 00
nov. 22 12:44:33 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 6 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 12:44:33 francois-B250M-DS3H kernel: Dev sdc: unable to read RDB block 0
nov. 22 12:44:33 francois-B250M-DS3H kernel:  sdc: unable to read partition table
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Sense not available.
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Sense not available.
nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 0 512-byte logical blocks: (0 B/0 B)
nov. 22 12:44:33 francois-B250M-DS3H kernel: sdc: detected capacity change from 8089950 to 0
nov. 22 12:44:33 francois-B250M-DS3H systemd-udevd[518]: sdc: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdc' failed with exit code 1.
nov. 22 13:06:01 francois-B250M-DS3H sudo[5001]:    franc : user NOT in sudoers ; TTY=pts/0 ; PWD=/home/franc/Bureau ; USER=root ; COMMAND=/usr/bin/journalctl -g sdc
nov. 22 13:08:22 francois-B250M-DS3H sudo[7306]: administrateur : TTY=pts/0 ; PWD=/home/administrateur/Bureau ; USER=root ; COMMAND=/usr/bin/journalctl -g sdc
nov. 22 13:11:25 francois-B250M-DS3H sudo[7362]: administrateur : TTY=pts/0 ; PWD=/home/administrateur/Bureau ; USER=root ; COMMAND=/usr/sbin/smartctl -s on -T verypermissive -a /dev/sdc
-- Boot 97ae2ada3e6c4ac281e7fb339ae46c6c --
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 8089950 512-byte logical blocks: (4.14 GB/3.86 GiB)
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write Protect is off
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=12s
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#6 CDB: Read(10) 28 00 00 00 00 04 00 00 04 00
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 2, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 3, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=12s
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#7 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 0, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#9 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=12s
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#9 CDB: Read(10) 28 00 00 00 00 02 00 00 02 00
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 2 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 1, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#10 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#10 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 4 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 0, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 1, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 2, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 3, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#22 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#22 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 4 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 0, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 1, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#11 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#11 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#12 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#12 CDB: Read(10) 28 00 00 00 00 02 00 00 02 00
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 2 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#13 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#13 CDB: Read(10) 28 00 00 00 00 04 00 00 02 00
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 4 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#14 CDB: Read(10) 28 00 00 00 00 06 00 00 02 00
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 6 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#23 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
nov. 22 14:29:14 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] tag#23 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 4 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: Dev sdc: unable to read

Hors ligne

#19 Le 22/11/2023, à 15:48

zebone

Re : HDD inaccessible

puis  geole  a  écrit :
sudo journalctl -b -p err

   ov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: cmd 60/02:c8:00:00:00/00:00:00:00:00/40 tag 25 ncq dma 1024 in
lines 1-23
























nov. 22 14:29:14 francois-B250M-DS3H kernel: x86/cpu: SGX disabled by BIOS.
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: Read log 0x10 page 0x00 failed, Emask 0x1
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4: failed to read log page 10h (errno=-5)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: exception Emask 0x1 SAct 0x6000000 SErr 0x0 action 0x6
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: irq_stat 0x40000001
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed command: READ FPDMA QUEUED
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: cmd 60/02:c8:00:00:00/00:00:00:00:00/40 tag 25 ncq dma 1024 in
lines 1-23
























nov. 22 14:29:14 francois-B250M-DS3H kernel: x86/cpu: SGX disabled by BIOS.
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: Read log 0x10 page 0x00 failed, Emask 0x1
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4: failed to read log page 10h (errno=-5)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: exception Emask 0x1 SAct 0x6000000 SErr 0x0 action 0x6
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: irq_stat 0x40000001
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed command: READ FPDMA QUEUED
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: cmd 60/02:c8:00:00:00/00:00:00:00:00/40 tag 25 ncq dma 1024 in
                                                      res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed command: READ FPDMA QUEUED
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: cmd 60/02:d0:02:00:00/00:00:00:00:00/40 tag 26 ncq dma 1024 in
                                                      res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: Read log 0x10 page 0x00 failed, Emask 0x1
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4: failed to read log page 10h (errno=-5)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: exception Emask 0x1 SAct 0x70000000 SErr 0x0 action 0x6
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: irq_stat 0x40000001
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed command: READ FPDMA QUEUED
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: cmd 60/04:e0:04:00:00/00:00:00:00:00/40 tag 28 ncq dma 2048 in
                                                      res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed command: READ FPDMA QUEUED
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: cmd 60/02:e8:02:00:00/00:00:00:00:00/40 tag 29 ncq dma 1024 in
                                                      res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed command: READ FPDMA QUEUED
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: cmd 60/02:f0:00:00:00/00:00:00:00:00/40 tag 30 ncq dma 1024 in
                                                      res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: irq_stat 0x40000001
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed command: READ DMA
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: cmd c8/00:02:00:00:00/00:00:00:00:00/e0 tag 6 dma 1024 in
                                                      res 51/04:02:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: status: { DRDY ERR }
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: error: { ABRT }
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: irq_stat 0x40000001
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed command: READ DMA
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: cmd c8/00:02:02:00:00/00:00:00:00:00/e0 tag 20 dma 1024 in
                                                      res 51/04:02:02:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: status: { DRDY ERR }
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: error: { ABRT }
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed to set xfermode (err_mask=0x1)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed to set xfermode (err_mask=0x1)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed to set xfermode (err_mask=0x1)
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 2, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 3, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 0, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 2 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 1, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 4 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 0, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 1, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 2, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 3, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 4 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 0, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 1, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 2 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 4 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 6 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 4 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: Dev sdc: unable to read RDB block 0
nov. 22 14:29:14 francois-B250M-DS3H systemd-udevd[450]: /etc/udev/rules.d/60-brother-brscan4-libsane-type1.rules:9 Invalid key 'SYSFS'
nov. 22 14:29:14 francois-B250M-DS3H systemd-udevd[450]: /etc/udev/rules.d/60-brother-libsane-type1-inst.rules:14 Invalid key 'SYSFS'
nov. 22 14:29:14 francois-B250M-DS3H systemd-udevd[450]: /etc/udev/rules.d/60-brother-libsane-type1.rules:17 Invalid key 'SYSFS'
nov. 22 14:29:15 francois-B250M-DS3H systemd[1]: Failed to mount /mnt/pci-0000:00:17.0-ata-2.0.
nov. 22 14:29:15 francois-B250M-DS3H systemd[1]: Failed to mount /mnt/pci-0000:00:17.0-ata-2.0.
nov. 22 14:29:16 francois-B250M-DS3H systemd[1]: Failed to start Process error reports when automatic reporting is enabled.
nov. 22 14:29:18 francois-B250M-DS3H systemd[1543]: Failed to start Application launched by gnome-session-binary.
nov. 22 14:29:18 francois-B250M-DS3H canonical-livepatch.canonical-livepatchd[1380]: Task "refresh" returned an error: livepatch check failed: POST request to "https://>
nov. 22 14:29:19 francois-B250M-DS3H systemd[1]: Failed to start Service for snap application tor-daemon.tor.
nov. 22 14:29:21 francois-B250M-DS3H hpfax[2368]: [2368]: error: Failed to create /var/spool/cups/tmp/.hplip
nov. 22 14:29:29 francois-B250M-DS3H smartd[1320]: Device: /dev/sdb [SAT], 1318 Currently unreadable (pending) sectors
nov. 22 14:29:29 francois-B250M-DS3H smartd[1320]: Device: /dev/sdb [SAT], 685 Offline uncorrectable sectors
nov. 22 14:29:33 francois-B250M-DS3H systemd[1543]: Failed to start Application launched by gnome-session-binary.
nov. 22 14:29:33 francois-B250M-DS3H systemd[1543]: Failed to start Application launched by gnome-session-binary.
nov. 22 14:29:42 francois-B250M-DS3H pulseaudio[1577]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include:>
nov. 22 14:30:11 francois-B250M-DS3H gnome-session-binary[4068]: GLib-GIO-CRITICAL: g_bus_get_sync: assertion 'error == NULL || *error == NULL' failed
nov. 22 14:30:11 francois-B250M-DS3H gnome-session-binary[4068]: GLib-GIO-CRITICAL: g_bus_get_sync: assertion 'error == NULL || *error == NULL' failed
nov. 22 14:30:12 francois-B250M-DS3H systemd[1]: Failed to start Process error reports when automatic reporting is enabled.
nov. 22 14:30:13 francois-B250M-DS3H systemd[1]: Failed to start Process error reports when automatic reporting is enabled.
nov. 22 14:30:24 francois-B250M-DS3H gdm-password][4504]: gkr-pam: unable to locate daemon control file
nov. 22 14:30:25 francois-B250M-DS3H systemd[4518]: Failed to start Application launched by gnome-session-binary.
nov. 22 14:30:26 francois-B250M-DS3H systemd[4518]: Failed to start Application launched by gnome-session-binary.
nov. 22 14:30:26 francois-B250M-DS3H systemd[4518]: Failed to start Application launched by gnome-session-binary.
nov. 22 14:30:28 francois-B250M-DS3H gdm-launch-environment][4021]: GLib-GObject: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
nov. 22 14:30:37 francois-B250M-DS3H pulseaudio[4528]: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed ou>
nov. 22 14:39:56 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x18000000 SErr 0x0 action 0x0
nov. 22 14:39:56 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:39:56 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:39:56 francois-B250M-DS3H kernel: ata1.00: cmd 60/00:d8:30:40:e8/01:00:36:00:00/40 tag 27 ncq dma 131072 in
                                                      res 41/40:00:b0:40:e8/00:01:36:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:39:56 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:39:56 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:39:56 francois-B250M-DS3H kernel: I/O error, dev sda, sector 921190576 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x0
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:78:b0:40:e8/00:00:36:00:00/40 tag 15 ncq dma 4096 in
                                                      res 41/40:08:b0:40:e8/00:00:36:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:39:57 francois-B250M-DS3H kernel: I/O error, dev sda, sector 921190576 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x1000000 SErr 0x0 action 0x0
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:c0:b0:40:e8/00:00:36:00:00/40 tag 24 ncq dma 4096 in
                                                      res 41/40:08:b0:40:e8/00:00:36:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:39:57 francois-B250M-DS3H kernel: I/O error, dev sda, sector 921190576 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: cmd 60/c8:08:78:4b:70/00:00:20:00:00/40 tag 1 ncq dma 102400 in
                                                      res 41/40:c8:98:4b:70/00:00:20:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:39:58 francois-B250M-DS3H kernel: I/O error, dev sda, sector 544230296 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x80fff80f SErr 0x0 action 0x0
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: cmd 60/00:00:50:cf:5c/01:00:00:00:00/40 tag 0 ncq dma 131072 in
                                                      res 41/40:00:d8:cf:5c/00:01:00:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:39:58 francois-B250M-DS3H kernel: I/O error, dev sda, sector 6082520 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x0
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:78:d8:cf:5c/00:00:00:00:00/40 tag 15 ncq dma 4096 in
                                                      res 41/40:08:d8:cf:5c/00:00:00:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:39:59 francois-B250M-DS3H kernel: I/O error, dev sda, sector 6082520 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x8 SErr 0x0 action 0x0
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:18:d8:cf:5c/00:00:00:00:00/40 tag 3 ncq dma 4096 in
                                                      res 41/40:08:d8:cf:5c/00:00:00:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:39:59 francois-B250M-DS3H kernel: I/O error, dev sda, sector 6082520 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x5 SErr 0x0 action 0x0
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: cmd 60/00:00:98:d9:c0/01:00:2a:00:00/40 tag 0 ncq dma 131072 in
                                                      res 41/40:00:00:da:c0/00:01:2a:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:00 francois-B250M-DS3H kernel: I/O error, dev sda, sector 717281792 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x200 SErr 0x0 action 0x0
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:48:00:da:c0/00:00:2a:00:00/40 tag 9 ncq dma 4096 in
                                                      res 41/40:08:00:da:c0/00:00:2a:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:00 francois-B250M-DS3H kernel: I/O error, dev sda, sector 717281792 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x4000 SErr 0x0 action 0x0
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:70:00:da:c0/00:00:2a:00:00/40 tag 14 ncq dma 4096 in
                                                      res 41/40:08:00:da:c0/00:00:2a:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:00 francois-B250M-DS3H kernel: I/O error, dev sda, sector 717281792 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x60000 SErr 0x0 action 0x0
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: cmd 60/00:88:68:51:a4/01:00:00:00:00/40 tag 17 ncq dma 131072 in
                                                      res 41/40:00:30:52:a4/00:01:00:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:02 francois-B250M-DS3H kernel: I/O error, dev sda, sector 10768944 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x20000 SErr 0x0 action 0x0
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:88:30:52:a4/00:00:00:00:00/40 tag 17 ncq dma 4096 in
                                                      res 41/40:08:30:52:a4/00:00:00:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:02 francois-B250M-DS3H kernel: I/O error, dev sda, sector 10768944 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x400 SErr 0x0 action 0x0
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:50:30:52:a4/00:00:00:00:00/40 tag 10 ncq dma 4096 in
                                                      res 41/40:08:30:52:a4/00:00:00:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:02 francois-B250M-DS3H kernel: I/O error, dev sda, sector 10768944 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x80800000 SErr 0x0 action 0x0
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: cmd 60/00:b8:80:a7:09/01:00:02:00:00/40 tag 23 ncq dma 131072 in
                                                      res 41/40:00:f8:a7:09/00:01:02:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:04 francois-B250M-DS3H kernel: I/O error, dev sda, sector 34187256 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x600000 SErr 0x0 action 0x0
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: cmd 60/00:a8:50:b1:09/01:00:02:00:00/40 tag 21 ncq dma 131072 in
                                                      res 41/40:00:08:b2:09/00:01:02:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:04 francois-B250M-DS3H kernel: I/O error, dev sda, sector 34189832 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x0
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:78:08:b2:09/00:00:02:00:00/40 tag 15 ncq dma 4096 in
                                                      res 41/40:08:08:b2:09/00:00:02:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:05 francois-B250M-DS3H kernel: I/O error, dev sda, sector 34189832 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x100000 SErr 0x0 action 0x0
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:a0:08:b2:09/00:00:02:00:00/40 tag 20 ncq dma 4096 in
                                                      res 41/40:08:08:b2:09/00:00:02:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:05 francois-B250M-DS3H kernel: I/O error, dev sda, sector 34189832 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x40000000 SErr 0x0 action 0x0
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: cmd 60/00:f0:d8:65:1c/01:00:0a:00:00/40 tag 30 ncq dma 131072 in
                                                      res 41/40:00:78:66:1c/00:01:0a:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:05 francois-B250M-DS3H kernel: I/O error, dev sda, sector 169633400 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x80000 SErr 0x0 action 0x0
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:98:78:66:1c/00:00:0a:00:00/40 tag 19 ncq dma 4096 in
                                                      res 41/40:08:78:66:1c/00:00:0a:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:06 francois-B250M-DS3H kernel: I/O error, dev sda, sector 169633400 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x200000 SErr 0x0 action 0x0
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:a8:78:66:1c/00:00:0a:00:00/40 tag 21 ncq dma 4096 in
                                                      res 41/40:08:78:66:1c/00:00:0a:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:06 francois-B250M-DS3H kernel: I/O error, dev sda, sector 169633400 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x8000000 SErr 0x0 action 0x0
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:d8:78:03:ce/00:00:29:00:00/40 tag 27 ncq dma 4096 in
                                                      res 41/40:08:78:03:ce/00:00:29:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x20 SErr 0x0 action 0x0
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:28:78:03:ce/00:00:29:00:00/40 tag 5 ncq dma 4096 in
                                                      res 41/40:08:78:03:ce/00:00:29:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:07 francois-B250M-DS3H kernel: I/O error, dev sda, sector 701367160 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x400 SErr 0x0 action 0x0
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:50:78:03:ce/00:00:29:00:00/40 tag 10 ncq dma 4096 in
                                                      res 41/40:08:78:03:ce/00:00:29:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:07 francois-B250M-DS3H kernel: I/O error, dev sda, sector 701367160 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: cmd 60/00:00:90:2e:c9/01:00:33:00:00/40 tag 0 ncq dma 131072 in
                                                      res 41/40:00:c8:2e:c9/00:01:33:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:08 francois-B250M-DS3H kernel: I/O error, dev sda, sector 868822728 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x4000 SErr 0x0 action 0x0
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:70:c8:2e:c9/00:00:33:00:00/40 tag 14 ncq dma 4096 in
                                                      res 41/40:08:c8:2e:c9/00:00:33:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:08 francois-B250M-DS3H kernel: I/O error, dev sda, sector 868822728 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x4 SErr 0x0 action 0x0
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:10:c8:2e:c9/00:00:33:00:00/40 tag 2 ncq dma 4096 in
                                                      res 41/40:08:c8:2e:c9/00:00:33:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:08 francois-B250M-DS3H kernel: I/O error, dev sda, sector 868822728 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x800 SErr 0x0 action 0x0
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:58:d0:83:3c/00:00:13:00:00/40 tag 11 ncq dma 4096 in
                                                      res 41/40:08:d0:83:3c/00:00:13:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:09 francois-B250M-DS3H kernel: I/O error, dev sda, sector 322733008 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x400000 SErr 0x0 action 0x0
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:b0:d0:83:3c/00:00:13:00:00/40 tag 22 ncq dma 4096 in
                                                      res 41/40:08:d0:83:3c/00:00:13:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:09 francois-B250M-DS3H kernel: I/O error, dev sda, sector 322733008 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:08:d0:83:3c/00:00:13:00:00/40 tag 1 ncq dma 4096 in
                                                      res 41/40:08:d0:83:3c/00:00:13:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:09 francois-B250M-DS3H kernel: I/O error, dev sda, sector 322733008 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x1000 SErr 0x0 action 0x0
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:60:88:a9:74/00:00:31:00:00/40 tag 12 ncq dma 4096 in
                                                      res 41/40:08:88:a9:74/00:00:31:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:09 francois-B250M-DS3H kernel: I/O error, dev sda, sector 829729160 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x20000 SErr 0x0 action 0x0
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:88:88:a9:74/00:00:31:00:00/40 tag 17 ncq dma 4096 in
                                                      res 41/40:08:88:a9:74/00:00:31:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:09 francois-B250M-DS3H kernel: I/O error, dev sda, sector 829729160 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x4000000 SErr 0x0 action 0x0
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:d0:58:b3:ad/00:00:08:00:00/40 tag 26 ncq dma 4096 in
                                                      res 41/40:08:58:b3:ad/00:00:08:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x200000 SErr 0x0 action 0x0
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:a8:58:b3:ad/00:00:08:00:00/40 tag 21 ncq dma 4096 in
                                                      res 41/40:08:58:b3:ad/00:00:08:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:13 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x100000 SErr 0x0 action 0x0
nov. 22 14:40:13 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:13 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:13 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:a0:58:b3:ad/00:00:08:00:00/40 tag 20 ncq dma 4096 in
                                                      res 41/40:08:58:b3:ad/00:00:08:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:13 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:13 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:13 francois-B250M-DS3H kernel: I/O error, dev sda, sector 145601368 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x300 SErr 0x0 action 0x0
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: cmd 60/00:40:88:da:44/01:00:02:00:00/40 tag 8 ncq dma 131072 in
                                                      res 41/40:00:78:db:44/00:01:02:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:15 francois-B250M-DS3H kernel: I/O error, dev sda, sector 38067064 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x2000 SErr 0x0 action 0x0
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:68:78:db:44/00:00:02:00:00/40 tag 13 ncq dma 4096 in
                                                      res 41/40:08:78:db:44/00:00:02:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:15 francois-B250M-DS3H kernel: I/O error, dev sda, sector 38067064 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x40000 SErr 0x0 action 0x0
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:90:78:db:44/00:00:02:00:00/40 tag 18 ncq dma 4096 in
                                                      res 41/40:08:78:db:44/00:00:02:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:15 francois-B250M-DS3H kernel: I/O error, dev sda, sector 38067064 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2

Hors ligne

#20 Le 22/11/2023, à 16:09

geole

Re : HDD inaccessible

Deux remarques
A) Pour le disque de 1 To

nov. 20 07:34:06 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
nov. 22 11:33:07 francois-B250M-DS3H smartd[64592]: Device: /dev/sdc [SAT], 685 Offline uncorrectable sectors
nov. 22 12:03:06 francois-B250M-DS3H smartd[64592]: Device: /dev/sdc [SAT], 1318 Currently unreadable (pending) sectors

Tu lui feras aussi un rapport smartctl.

B) Pour le disque de 3 To.       En fait celui que tu dis faire 3 TO.

nov. 22 12:44:33 francois-B250M-DS3H kernel: sd 3:0:0:0: [sdc] 8089950 512-byte logical blocks: (4.14 GB/3.86 GiB)

Il est vu comme un disque ayant  une taille de 4 Go.
Cela devient assez compliqué. Je peux juste proposer quelque chose
a) Tu donnes le nom  commercial du disque.
b) Avec ce nom,  je tente de trouver dans internet les caractéristiques CHS  de ce disque
c) Je tente de te les faire EMULER avec testdisk.   Exemple de grille à remplir

TestDisk 7.1, Data Recovery Utility, July 2019
Christophe GRENIER <grenier@cgsecurity.org>
https://www.cgsecurity.org


Disk /dev/sdd - 15 GB / 14 GiB - CHS 15000 64 32, sector size=512

Because these numbers change the way that TestDisk looks for partitions
and calculates their sizes, it's important to have the correct disk geometry.
PC partitioning programs often make partitions end on cylinder boundaries.

A partition's CHS values are based on disk translations which make them
different than its physical geometry. The most common CHS head values
are: 255, 240 and sometimes 16.




 [ Cylinders ]  [   Heads   ]  [  Sectors  ]  [Sector Size] >[    Ok     ]

Si cela fonctionne et qu'il voit alors le disque comme ayant une taille de  4 To.
d)  On parcourt le disque et espérant  qu'il acceptera de lire les  secteurs.
e) On duplique les fichiers sur un autre disque    donc la taille dépend    du taux de remplissage du disque ( pas nécessairement 4 To) en espérant ne pas rencontrer trop de secteurs illisibles.

Peux-tu refaire

sudo journalctl --no-pager  -b -p err

Dernière modification par geole (Le 22/11/2023, à 16:12)

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#21 Le 22/11/2023, à 16:17

zebone

Re : HDD inaccessible

   administrateur@francois-B250M-DS3H:~/Bureau$ sudo journalctl --no-pager  -b -p err
[sudo] Mot de passe de administrateur : 
nov. 22 14:29:14 francois-B250M-DS3H kernel: x86/cpu: SGX disabled by BIOS.
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: Read log 0x10 page 0x00 failed, Emask 0x1
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4: failed to read log page 10h (errno=-5)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: exception Emask 0x1 SAct 0x6000000 SErr 0x0 action 0x6
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: irq_stat 0x40000001
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed command: READ FPDMA QUEUED
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: cmd 60/02:c8:00:00:00/00:00:00:00:00/40 tag 25 ncq dma 1024 in
                                                      res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed command: READ FPDMA QUEUED
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: cmd 60/02:d0:02:00:00/00:00:00:00:00/40 tag 26 ncq dma 1024 in
                                                      res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: Read log 0x10 page 0x00 failed, Emask 0x1
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4: failed to read log page 10h (errno=-5)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: exception Emask 0x1 SAct 0x70000000 SErr 0x0 action 0x6
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: irq_stat 0x40000001
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed command: READ FPDMA QUEUED
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: cmd 60/04:e0:04:00:00/00:00:00:00:00/40 tag 28 ncq dma 2048 in
                                                      res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed command: READ FPDMA QUEUED
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: cmd 60/02:e8:02:00:00/00:00:00:00:00/40 tag 29 ncq dma 1024 in
                                                      res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed command: READ FPDMA QUEUED
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: cmd 60/02:f0:00:00:00/00:00:00:00:00/40 tag 30 ncq dma 1024 in
                                                      res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: irq_stat 0x40000001
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed command: READ DMA
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: cmd c8/00:02:00:00:00/00:00:00:00:00/e0 tag 6 dma 1024 in
                                                      res 51/04:02:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: status: { DRDY ERR }
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: error: { ABRT }
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: irq_stat 0x40000001
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed command: READ DMA
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: cmd c8/00:02:02:00:00/00:00:00:00:00/e0 tag 20 dma 1024 in
                                                      res 51/04:02:02:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: status: { DRDY ERR }
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: error: { ABRT }
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed to set xfermode (err_mask=0x1)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed to set xfermode (err_mask=0x1)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20221020/psargs-330)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
nov. 22 14:29:14 francois-B250M-DS3H kernel: ata4.00: failed to set xfermode (err_mask=0x1)
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 2, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 3, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 0, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 2 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 1, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 4 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 0, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 1, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 2, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 3, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 4 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 0, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: Buffer I/O error on dev sdc, logical block 1, async page read
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 2 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 4 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 6 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 4 prio class 2
nov. 22 14:29:14 francois-B250M-DS3H kernel: Dev sdc: unable to read RDB block 0
nov. 22 14:29:14 francois-B250M-DS3H systemd-udevd[450]: /etc/udev/rules.d/60-brother-brscan4-libsane-type1.rules:9 Invalid key 'SYSFS'
nov. 22 14:29:14 francois-B250M-DS3H systemd-udevd[450]: /etc/udev/rules.d/60-brother-libsane-type1-inst.rules:14 Invalid key 'SYSFS'
nov. 22 14:29:14 francois-B250M-DS3H systemd-udevd[450]: /etc/udev/rules.d/60-brother-libsane-type1.rules:17 Invalid key 'SYSFS'
nov. 22 14:29:15 francois-B250M-DS3H systemd[1]: Failed to mount /mnt/pci-0000:00:17.0-ata-2.0.
nov. 22 14:29:15 francois-B250M-DS3H systemd[1]: Failed to mount /mnt/pci-0000:00:17.0-ata-2.0.
nov. 22 14:29:16 francois-B250M-DS3H systemd[1]: Failed to start Process error reports when automatic reporting is enabled.
nov. 22 14:29:18 francois-B250M-DS3H systemd[1543]: Failed to start Application launched by gnome-session-binary.
nov. 22 14:29:18 francois-B250M-DS3H canonical-livepatch.canonical-livepatchd[1380]: Task "refresh" returned an error: livepatch check failed: POST request to "[url]https://livepatch.canonical.com/v1/client/43847d051aed4468a31b0b80dd3f53ee/updates[/url]" failed, retrying in 30s.
nov. 22 14:29:19 francois-B250M-DS3H systemd[1]: Failed to start Service for snap application tor-daemon.tor.
nov. 22 14:29:21 francois-B250M-DS3H hpfax[2368]: [2368]: error: Failed to create /var/spool/cups/tmp/.hplip
nov. 22 14:29:29 francois-B250M-DS3H smartd[1320]: Device: /dev/sdb [SAT], 1318 Currently unreadable (pending) sectors
nov. 22 14:29:29 francois-B250M-DS3H smartd[1320]: Device: /dev/sdb [SAT], 685 Offline uncorrectable sectors
nov. 22 14:29:33 francois-B250M-DS3H systemd[1543]: Failed to start Application launched by gnome-session-binary.
nov. 22 14:29:33 francois-B250M-DS3H systemd[1543]: Failed to start Application launched by gnome-session-binary.
nov. 22 14:29:42 francois-B250M-DS3H pulseaudio[1577]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
nov. 22 14:30:11 francois-B250M-DS3H gnome-session-binary[4068]: GLib-GIO-CRITICAL: g_bus_get_sync: assertion 'error == NULL || *error == NULL' failed
nov. 22 14:30:11 francois-B250M-DS3H gnome-session-binary[4068]: GLib-GIO-CRITICAL: g_bus_get_sync: assertion 'error == NULL || *error == NULL' failed
nov. 22 14:30:12 francois-B250M-DS3H systemd[1]: Failed to start Process error reports when automatic reporting is enabled.
nov. 22 14:30:13 francois-B250M-DS3H systemd[1]: Failed to start Process error reports when automatic reporting is enabled.
nov. 22 14:30:24 francois-B250M-DS3H gdm-password][4504]: gkr-pam: unable to locate daemon control file
nov. 22 14:30:25 francois-B250M-DS3H systemd[4518]: Failed to start Application launched by gnome-session-binary.
nov. 22 14:30:26 francois-B250M-DS3H systemd[4518]: Failed to start Application launched by gnome-session-binary.
nov. 22 14:30:26 francois-B250M-DS3H systemd[4518]: Failed to start Application launched by gnome-session-binary.
nov. 22 14:30:28 francois-B250M-DS3H gdm-launch-environment][4021]: GLib-GObject: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
nov. 22 14:30:37 francois-B250M-DS3H pulseaudio[4528]: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms)
nov. 22 14:39:56 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x18000000 SErr 0x0 action 0x0
nov. 22 14:39:56 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:39:56 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:39:56 francois-B250M-DS3H kernel: ata1.00: cmd 60/00:d8:30:40:e8/01:00:36:00:00/40 tag 27 ncq dma 131072 in
                                                      res 41/40:00:b0:40:e8/00:01:36:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:39:56 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:39:56 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:39:56 francois-B250M-DS3H kernel: I/O error, dev sda, sector 921190576 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x0
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:78:b0:40:e8/00:00:36:00:00/40 tag 15 ncq dma 4096 in
                                                      res 41/40:08:b0:40:e8/00:00:36:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:39:57 francois-B250M-DS3H kernel: I/O error, dev sda, sector 921190576 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x1000000 SErr 0x0 action 0x0
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:c0:b0:40:e8/00:00:36:00:00/40 tag 24 ncq dma 4096 in
                                                      res 41/40:08:b0:40:e8/00:00:36:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:39:57 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:39:57 francois-B250M-DS3H kernel: I/O error, dev sda, sector 921190576 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: cmd 60/c8:08:78:4b:70/00:00:20:00:00/40 tag 1 ncq dma 102400 in
                                                      res 41/40:c8:98:4b:70/00:00:20:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:39:58 francois-B250M-DS3H kernel: I/O error, dev sda, sector 544230296 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x80fff80f SErr 0x0 action 0x0
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: cmd 60/00:00:50:cf:5c/01:00:00:00:00/40 tag 0 ncq dma 131072 in
                                                      res 41/40:00:d8:cf:5c/00:01:00:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:39:58 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:39:58 francois-B250M-DS3H kernel: I/O error, dev sda, sector 6082520 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x0
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:78:d8:cf:5c/00:00:00:00:00/40 tag 15 ncq dma 4096 in
                                                      res 41/40:08:d8:cf:5c/00:00:00:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:39:59 francois-B250M-DS3H kernel: I/O error, dev sda, sector 6082520 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x8 SErr 0x0 action 0x0
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:18:d8:cf:5c/00:00:00:00:00/40 tag 3 ncq dma 4096 in
                                                      res 41/40:08:d8:cf:5c/00:00:00:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:39:59 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:39:59 francois-B250M-DS3H kernel: I/O error, dev sda, sector 6082520 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x5 SErr 0x0 action 0x0
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: cmd 60/00:00:98:d9:c0/01:00:2a:00:00/40 tag 0 ncq dma 131072 in
                                                      res 41/40:00:00:da:c0/00:01:2a:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:00 francois-B250M-DS3H kernel: I/O error, dev sda, sector 717281792 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x200 SErr 0x0 action 0x0
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:48:00:da:c0/00:00:2a:00:00/40 tag 9 ncq dma 4096 in
                                                      res 41/40:08:00:da:c0/00:00:2a:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:00 francois-B250M-DS3H kernel: I/O error, dev sda, sector 717281792 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x4000 SErr 0x0 action 0x0
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:70:00:da:c0/00:00:2a:00:00/40 tag 14 ncq dma 4096 in
                                                      res 41/40:08:00:da:c0/00:00:2a:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:00 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:00 francois-B250M-DS3H kernel: I/O error, dev sda, sector 717281792 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x60000 SErr 0x0 action 0x0
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: cmd 60/00:88:68:51:a4/01:00:00:00:00/40 tag 17 ncq dma 131072 in
                                                      res 41/40:00:30:52:a4/00:01:00:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:02 francois-B250M-DS3H kernel: I/O error, dev sda, sector 10768944 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x20000 SErr 0x0 action 0x0
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:88:30:52:a4/00:00:00:00:00/40 tag 17 ncq dma 4096 in
                                                      res 41/40:08:30:52:a4/00:00:00:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:02 francois-B250M-DS3H kernel: I/O error, dev sda, sector 10768944 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x400 SErr 0x0 action 0x0
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:50:30:52:a4/00:00:00:00:00/40 tag 10 ncq dma 4096 in
                                                      res 41/40:08:30:52:a4/00:00:00:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:02 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:02 francois-B250M-DS3H kernel: I/O error, dev sda, sector 10768944 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x80800000 SErr 0x0 action 0x0
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: cmd 60/00:b8:80:a7:09/01:00:02:00:00/40 tag 23 ncq dma 131072 in
                                                      res 41/40:00:f8:a7:09/00:01:02:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:04 francois-B250M-DS3H kernel: I/O error, dev sda, sector 34187256 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x600000 SErr 0x0 action 0x0
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: cmd 60/00:a8:50:b1:09/01:00:02:00:00/40 tag 21 ncq dma 131072 in
                                                      res 41/40:00:08:b2:09/00:01:02:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:04 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:04 francois-B250M-DS3H kernel: I/O error, dev sda, sector 34189832 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x0
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:78:08:b2:09/00:00:02:00:00/40 tag 15 ncq dma 4096 in
                                                      res 41/40:08:08:b2:09/00:00:02:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:05 francois-B250M-DS3H kernel: I/O error, dev sda, sector 34189832 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x100000 SErr 0x0 action 0x0
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:a0:08:b2:09/00:00:02:00:00/40 tag 20 ncq dma 4096 in
                                                      res 41/40:08:08:b2:09/00:00:02:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:05 francois-B250M-DS3H kernel: I/O error, dev sda, sector 34189832 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x40000000 SErr 0x0 action 0x0
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: cmd 60/00:f0:d8:65:1c/01:00:0a:00:00/40 tag 30 ncq dma 131072 in
                                                      res 41/40:00:78:66:1c/00:01:0a:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:05 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:05 francois-B250M-DS3H kernel: I/O error, dev sda, sector 169633400 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x80000 SErr 0x0 action 0x0
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:98:78:66:1c/00:00:0a:00:00/40 tag 19 ncq dma 4096 in
                                                      res 41/40:08:78:66:1c/00:00:0a:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:06 francois-B250M-DS3H kernel: I/O error, dev sda, sector 169633400 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x200000 SErr 0x0 action 0x0
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:a8:78:66:1c/00:00:0a:00:00/40 tag 21 ncq dma 4096 in
                                                      res 41/40:08:78:66:1c/00:00:0a:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:06 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:06 francois-B250M-DS3H kernel: I/O error, dev sda, sector 169633400 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x8000000 SErr 0x0 action 0x0
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:d8:78:03:ce/00:00:29:00:00/40 tag 27 ncq dma 4096 in
                                                      res 41/40:08:78:03:ce/00:00:29:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x20 SErr 0x0 action 0x0
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:28:78:03:ce/00:00:29:00:00/40 tag 5 ncq dma 4096 in
                                                      res 41/40:08:78:03:ce/00:00:29:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:07 francois-B250M-DS3H kernel: I/O error, dev sda, sector 701367160 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x400 SErr 0x0 action 0x0
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:50:78:03:ce/00:00:29:00:00/40 tag 10 ncq dma 4096 in
                                                      res 41/40:08:78:03:ce/00:00:29:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:07 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:07 francois-B250M-DS3H kernel: I/O error, dev sda, sector 701367160 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: cmd 60/00:00:90:2e:c9/01:00:33:00:00/40 tag 0 ncq dma 131072 in
                                                      res 41/40:00:c8:2e:c9/00:01:33:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:08 francois-B250M-DS3H kernel: I/O error, dev sda, sector 868822728 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x4000 SErr 0x0 action 0x0
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:70:c8:2e:c9/00:00:33:00:00/40 tag 14 ncq dma 4096 in
                                                      res 41/40:08:c8:2e:c9/00:00:33:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:08 francois-B250M-DS3H kernel: I/O error, dev sda, sector 868822728 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x4 SErr 0x0 action 0x0
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:10:c8:2e:c9/00:00:33:00:00/40 tag 2 ncq dma 4096 in
                                                      res 41/40:08:c8:2e:c9/00:00:33:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:08 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:08 francois-B250M-DS3H kernel: I/O error, dev sda, sector 868822728 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x800 SErr 0x0 action 0x0
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:58:d0:83:3c/00:00:13:00:00/40 tag 11 ncq dma 4096 in
                                                      res 41/40:08:d0:83:3c/00:00:13:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:09 francois-B250M-DS3H kernel: I/O error, dev sda, sector 322733008 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x400000 SErr 0x0 action 0x0
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:b0:d0:83:3c/00:00:13:00:00/40 tag 22 ncq dma 4096 in
                                                      res 41/40:08:d0:83:3c/00:00:13:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:09 francois-B250M-DS3H kernel: I/O error, dev sda, sector 322733008 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:08:d0:83:3c/00:00:13:00:00/40 tag 1 ncq dma 4096 in
                                                      res 41/40:08:d0:83:3c/00:00:13:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:09 francois-B250M-DS3H kernel: I/O error, dev sda, sector 322733008 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x1000 SErr 0x0 action 0x0
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:60:88:a9:74/00:00:31:00:00/40 tag 12 ncq dma 4096 in
                                                      res 41/40:08:88:a9:74/00:00:31:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:09 francois-B250M-DS3H kernel: I/O error, dev sda, sector 829729160 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x20000 SErr 0x0 action 0x0
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:88:88:a9:74/00:00:31:00:00/40 tag 17 ncq dma 4096 in
                                                      res 41/40:08:88:a9:74/00:00:31:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:09 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:09 francois-B250M-DS3H kernel: I/O error, dev sda, sector 829729160 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x4000000 SErr 0x0 action 0x0
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:d0:58:b3:ad/00:00:08:00:00/40 tag 26 ncq dma 4096 in
                                                      res 41/40:08:58:b3:ad/00:00:08:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x200000 SErr 0x0 action 0x0
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:a8:58:b3:ad/00:00:08:00:00/40 tag 21 ncq dma 4096 in
                                                      res 41/40:08:58:b3:ad/00:00:08:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:10 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:13 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x100000 SErr 0x0 action 0x0
nov. 22 14:40:13 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:13 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:13 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:a0:58:b3:ad/00:00:08:00:00/40 tag 20 ncq dma 4096 in
                                                      res 41/40:08:58:b3:ad/00:00:08:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:13 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:13 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:13 francois-B250M-DS3H kernel: I/O error, dev sda, sector 145601368 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x300 SErr 0x0 action 0x0
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: cmd 60/00:40:88:da:44/01:00:02:00:00/40 tag 8 ncq dma 131072 in
                                                      res 41/40:00:78:db:44/00:01:02:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:15 francois-B250M-DS3H kernel: I/O error, dev sda, sector 38067064 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x2000 SErr 0x0 action 0x0
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:68:78:db:44/00:00:02:00:00/40 tag 13 ncq dma 4096 in
                                                      res 41/40:08:78:db:44/00:00:02:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:15 francois-B250M-DS3H kernel: I/O error, dev sda, sector 38067064 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: exception Emask 0x0 SAct 0x40000 SErr 0x0 action 0x0
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: irq_stat 0x40000008
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: failed command: READ FPDMA QUEUED
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: cmd 60/08:90:78:db:44/00:00:02:00:00/40 tag 18 ncq dma 4096 in
                                                      res 41/40:08:78:db:44/00:00:02:00:00/00 Emask 0x409 (media error) <F>
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: status: { DRDY ERR }
nov. 22 14:40:15 francois-B250M-DS3H kernel: ata1.00: error: { UNC }
nov. 22 14:40:15 francois-B250M-DS3H kernel: I/O error, dev sda, sector 38067064 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
nov. 22 14:59:32 francois-B250M-DS3H smartd[1320]: Device: /dev/sda [SAT], ATA error count increased from 359 to 396
nov. 22 14:59:33 francois-B250M-DS3H smartd[1320]: Device: /dev/sdb [SAT], 1318 Currently unreadable (pending) sectors
nov. 22 14:59:33 francois-B250M-DS3H smartd[1320]: Device: /dev/sdb [SAT], 685 Offline uncorrectable sectors

Dernière modification par zebone (Le 22/11/2023, à 18:37)

Hors ligne

#22 Le 22/11/2023, à 16:18

zebone

Re : HDD inaccessible

je navigue  dans  le cosmos  quand je  lis  ça !

Hors ligne

#23 Le 22/11/2023, à 16:34

cqfd93

Re : HDD inaccessible

Modération

Bonjour,

Pour ajouter toi-même les balises code à ton message #21 :

  • Cliquer sur le lien « Modifier » en bas à droite du message

  • Sélectionner le texte

  • Cliquer sur le <> de l'éditeur de message
    1530289742.png

− cqfd93 −

Hors ligne

#24 Le 22/11/2023, à 16:46

geole

Re : HDD inaccessible

Du coup, tu donneras aussi ces retours

sudo smartctl -s on  -a /dev/sda
sudo smartctl -s on  -a /dev/sdb

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#25 Le 22/11/2023, à 18:29

zebone

Re : HDD inaccessible

geole a écrit :

Du coup, tu donneras aussi ces retours

sudo smartctl -s on  -a /dev/sda
sudo smartctl -s on  -a /dev/sdb
  administrateur@francois-B250M-DS3H:~/Bureau$ sudo smartctl -s on  -a /dev/sda
[sudo] Mot de passe de administrateur : 
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.2.0-37-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     Samsung SSD 870 EVO 500GB
Serial Number:    S6PYNJ0R512715W
LU WWN Device Id: 5 002538 f315230e3
Firmware Version: SVT01B6Q
User Capacity:    500107862016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available, deterministic, zeroed
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is:  SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Nov 22 17:24:21 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x53) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  85) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   026   026   010    Pre-fail  Always       -       443
  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       15986
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       118
177 Wear_Leveling_Count     0x0013   099   099   000    Pre-fail  Always       -       8
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   026   026   010    Pre-fail  Always       -       443
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0
183 Runtime_Bad_Block       0x0013   026   026   010    Pre-fail  Always       -       443
187 Reported_Uncorrect      0x0032   099   099   000    Old_age   Always       -       396
190 Airflow_Temperature_Cel 0x0032   069   051   000    Old_age   Always       -       31
195 Hardware_ECC_Recovered  0x001a   199   199   000    Old_age   Always       -       396
199 UDMA_CRC_Error_Count    0x003e   100   100   000    Old_age   Always       -       0
235 Unknown_Attribute       0x0012   099   099   000    Old_age   Always       -       62
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       8226384157

SMART Error Log Version: 1
ATA Error Count: 396 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 396 occurred at disk power-on lifetime: 15983 hours (665 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 90 78 db 44 40  Error: UNC at LBA = 0x0044db78 = 4512632

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 90 78 db 44 40 12      01:57:03.496  READ FPDMA QUEUED
  47 00 01 00 00 00 40 0d      01:57:03.496  READ LOG DMA EXT
  47 00 01 30 06 00 40 0d      01:57:03.496  READ LOG DMA EXT
  47 00 01 30 00 00 40 0d      01:57:03.496  READ LOG DMA EXT
  47 00 01 00 00 00 40 0d      01:57:03.496  READ LOG DMA EXT

Error 395 occurred at disk power-on lifetime: 15983 hours (665 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 68 78 db 44 40  Error: UNC at LBA = 0x0044db78 = 4512632

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 68 78 db 44 40 0d      01:57:03.244  READ FPDMA QUEUED
  60 08 60 70 db 44 40 0c      01:57:03.244  READ FPDMA QUEUED
  60 08 58 68 db 44 40 0b      01:57:03.244  READ FPDMA QUEUED
  60 08 50 60 db 44 40 0a      01:57:03.244  READ FPDMA QUEUED
  60 08 48 58 db 44 40 09      01:57:03.244  READ FPDMA QUEUED

Error 394 occurred at disk power-on lifetime: 15983 hours (665 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 40 88 da 44 40  Error: UNC at LBA = 0x0044da88 = 4512392

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 40 88 da 44 40 08      01:57:03.001  READ FPDMA QUEUED
  60 00 38 88 d9 44 40 07      01:57:03.001  READ FPDMA QUEUED
  60 00 30 88 d8 44 40 06      01:57:03.001  READ FPDMA QUEUED
  60 00 28 88 d7 44 40 05      01:57:03.001  READ FPDMA QUEUED
  60 00 20 88 d6 44 40 04      01:57:03.001  READ FPDMA QUEUED

Error 393 occurred at disk power-on lifetime: 15983 hours (665 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 a0 58 b3 ad 40  Error: UNC at LBA = 0x00adb358 = 11383640

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 a0 58 b3 ad 40 14      01:57:01.439  READ FPDMA QUEUED
  60 08 98 08 c0 ad 40 13      01:57:01.439  READ FPDMA QUEUED
  60 08 90 e8 7a 17 40 12      01:57:01.439  READ FPDMA QUEUED
  60 08 88 e0 7a 17 40 11      01:57:01.439  READ FPDMA QUEUED
  60 08 80 d8 7a 17 40 10      01:57:01.439  READ FPDMA QUEUED

Error 392 occurred at disk power-on lifetime: 15983 hours (665 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 a8 58 b3 ad 40  Error: UNC at LBA = 0x00adb358 = 11383640

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 a8 58 b3 ad 40 15      01:56:58.579  READ FPDMA QUEUED
  47 00 01 00 00 00 40 1a      01:56:58.579  READ LOG DMA EXT
  47 00 01 30 06 00 40 1a      01:56:58.579  READ LOG DMA EXT
  47 00 01 30 00 00 40 1a      01:56:58.579  READ LOG DMA EXT
  47 00 01 00 00 00 40 1a      01:56:58.579  READ LOG DMA EXT

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
  256        0    65535  Read_scanning was never started
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Hors ligne

Pages : 1 2