#1 Le 30/12/2008, à 01:11
- baignoire
[resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
bonjour a tous,
j ai installé avec (quasi) succes intrepid sur mon mon joli HP mini 2133 de noel.
j'ai bien suivi le tuto : https://wiki.ubuntu.com/LaptopTestingTeam/HP2133
mqis je me trouve avec un probleme qui semble inédit sur les forums que google me propose :
ma résolution d'ecran se trouve etre en 640X480 et aucun autre choix n'est disponible via "systeme>preferences>resolution de l'ecran".
mon xorg.conf est celui du tuto (apres 42 tentatives de modifs) :
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by reidy90, by copying correct settings from
# the xorg.conf that was provided with the SUSE hp 2133.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
BoardName "Framebuffer Graphics"
Driver "vesa"
Identifier "Device[0]"
Screen 0
VendorName "VIA Technology"
Option "NoDDCValue"
Option "ActiveDevice" "LCD,CRT"
Option "PanelID" "3"
Option "DisplayHardwareLayout" "LCD"
Option "ForceLCD"
#[<bool>]
Option "VideoOnDevice" "LCD"
# Option "LCDPort" "DVP0"
EndSection
Section "Monitor"
DisplaySize 250 150
HorizSync 28-500
Identifier "Monitor[0]"
ModelName "VIEWSONIC VA912-4SERIES"
Option "DPMS"
VendorName "VSC"
VertRefresh 43-60
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1280x800" 120.33 1280 1368 1504 1728 800 801 804 839
Modeline "1280x800" 118.88 1280 1368 1504 1728 800 801 804 839
Modeline "1280x800" 116.21 1280 1360 1496 1712 800 801 804 838
# Modeline "1280x768" 114.53 1280 1360 1496 1712 768 769 772 806
# Modeline "1280x768" 113.01 1280 1360 1496 1712 768 769 772 805
# Modeline "1280x768" 111.63 1280 1360 1496 1712 768 769 772 805
Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795 -HSync +Vsync
Modeline "1024x768" 92.05 1024 1088 1200 1376 768 769 772 806
Modeline "1024x768" 90.83 1024 1088 1200 1376 768 769 772 805
Modeline "1024x768" 89.72 1024 1088 1200 1376 768 769 772 805
Modeline "1280x600" 88.68 1280 1352 1488 1696 600 601 604 630
Modeline "1280x600" 87.48 1280 1352 1488 1696 600 601 604 629
Modeline "1280x600" 85.59 1280 1344 1480 1680 600 601 604 629
Modeline "1024x600" 71.11 1024 1080 1192 1360 600 601 604 630
Modeline "1024x600" 69.32 1024 1080 1184 1344 600 601 604 629
Modeline "1024x600" 68.48 1024 1080 1184 1344 600 601 604 629
Modeline "800x600" 55.22 800 840 928 1056 600 601 604 630
Modeline "800x600" 54.47 800 840 928 1056 600 601 604 629
Modeline "800x600" 53.80 800 840 928 1056 600 601 604 629
Modeline "768x576" 50.62 768 808 888 1008 576 577 580 605
Modeline "768x576" 49.92 768 808 888 1008 576 577 580 604
Modeline "768x576" 49.32 768 808 888 1008 576 577 580 604
Modeline "640x480" 34.80 640 672 736 832 480 481 484 504
Modeline "640x480" 34.38 640 672 736 832 480 481 484 504
Modeline "640x480" 33.90 640 672 736 832 480 481 484 503
EndSection
Section "Screen"
SubSection "Display"
Modes "1280x768"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
j ai installé le dernier driver via trouvé là : http://linux.via.com.tw/support/downloadFiles.action
j ai tenté (bricolé) pas mal de trucs et j'avoue etre a court d'idées et de courage....
autre chose, la fin de l'cran de chargement ubuntu lors du démarrage presente de droles de couleurs, et j ai desz ecrans moches, colorés et bigarrés qui apparaissent en 'flashs' juste avant l ecran beige clair d'ouverture d ubuntu, meme chose lors des redemarrages du serveur x 'ctrl+alt+backspace'
si vous avez des idées.....
merci
Dernière modification par baignoire (Le 01/01/2009, à 16:45)
Hors ligne
#2 Le 30/12/2008, à 05:03
- andso
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
bonjour,
HorizSync 28-500
jamais vu ça
sauvegardes ce xorg.conf et repars d' un neuf par
sudo dpkg-reconfigure -phigh xserver-xorg
puis
http://forum.ubuntu-fr.org/viewtopic.ph … 9#p2259389
ou google
étonné que celui-ci marche
edit: que donnes
sudo ddcprobe | grep monitorrange
sudo xresprobe --help
Dernière modification par andso (Le 30/12/2008, à 22:58)
IMPORTANT: Booster votre (X et K)ubuntu: http://forum.ubuntu-fr.org/viewtopic.php?id=241092 (pfou!...)
à essayer, et... demain debian? http://fr.wikipedia.org/wiki/Demain_les_chiens
demain les biens? mes biens biens? t' exagére ... la banque!
Hors ligne
#3 Le 31/12/2008, à 14:15
- baignoire
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
merci de l'aide
j ai testé :
sudo dpkg-reconfigure -phigh xserver-xorg
qui me donne un xorg.conf suivant :
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Configured Video Device"
Driver "vesa"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
puis le resultat des deux commandes demandées:
raf@raf-mini:~$ sudo ddcprobe | grep monitorrange
sudo: ddcprobe: command not found
raf@raf-mini:~$ sudo xresprobe --help
sudo: xresprobe: command not found
c'est grave docteur ?
Hors ligne
#4 Le 31/12/2008, à 15:32
- andso
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
un post ou d' autres ont le même pb
http://forum.ubuntu-fr.org/viewtopic.php?id=252423
bon le module ddc ne doit pas être activé
xresprobe à installer par synaptic puis postes le retour
et le contenu de /var/log/xorg.0.log
je t' aurais bien indiquer ça
http://forum.ubuntu-fr.org/viewtopic.php?pid=2259389#p2259389
mais après recherches google pas d' infos sur l' écran
Dernière modification par andso (Le 31/12/2008, à 15:33)
IMPORTANT: Booster votre (X et K)ubuntu: http://forum.ubuntu-fr.org/viewtopic.php?id=241092 (pfou!...)
à essayer, et... demain debian? http://fr.wikipedia.org/wiki/Demain_les_chiens
demain les biens? mes biens biens? t' exagére ... la banque!
Hors ligne
#5 Le 31/12/2008, à 17:52
- baignoire
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
oui, j ai vu sur l'autre post, un des gars a visiblement le meme probleme d'affichage
je le renvoie ici puisque ce post sera bientot résolu
xeresprobe donne :
raf@raf-mini:~$ sudo xresprobe --help
id:
res:
freq:
disptype: lcd/lvds
et le xorg.0.log est visible à :
http://www.paraglidingearth.com/Xorg.0.log
Hors ligne
#6 Le 31/12/2008, à 18:33
- andso
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
bon resolu! tu vas vite en besogne
il charge pas le driver via
(II) VESA(0): VESA VBE OEM: VIA N3364
pas ddc (pour identifier l' écran)
II) Module "ddc" already built-in
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): VESA VBE DDC Level 2
(II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
(II) VESA(0): VESA VBE DDC read failed
bon 640*480
(WW) VESA(0): Unable to estimate virtual size
(--) VESA(0): Virtual size is 640x480 (pitch 640)
(**) VESA(0): *Built-in mode "640x480"
good
(==) RandR enabled
2 soluces soit partir du xorg minimal soit du xorg étonnant de suse
que donnes
xrandr
et pendant ce temps je vais essayé de te filer un xorg élagué
t' es sous hardy?
IMPORTANT: Booster votre (X et K)ubuntu: http://forum.ubuntu-fr.org/viewtopic.php?id=241092 (pfou!...)
à essayer, et... demain debian? http://fr.wikipedia.org/wiki/Demain_les_chiens
demain les biens? mes biens biens? t' exagére ... la banque!
Hors ligne
#7 Le 31/12/2008, à 18:59
- andso
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
je tenterais, à tout hasard ???
dans le xorg.conf
Section "Screen"
[...]
SubSection "Display"
[...]
Virtual 2048 2048
EndSubSection
EndSection
mauvaise idée, ton ecran est pas détecté
Dernière modification par andso (Le 31/12/2008, à 19:08)
IMPORTANT: Booster votre (X et K)ubuntu: http://forum.ubuntu-fr.org/viewtopic.php?id=241092 (pfou!...)
à essayer, et... demain debian? http://fr.wikipedia.org/wiki/Demain_les_chiens
demain les biens? mes biens biens? t' exagére ... la banque!
Hors ligne
#8 Le 31/12/2008, à 19:29
- baignoire
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
raf@raf-mini:~$ xrandr
Screen 0: minimum 640 x 480, current 640 x 480, maximum 640 x 480
default connected 640x480+0+0 0mm x 0mm
640x480 60.0*
je suis sous intrepid
Hors ligne
#9 Le 31/12/2008, à 20:12
- andso
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
bon,
je m' absente, très beaucoup trop d'infos ici et là
http://forums.mininoteuser.com/viewtopi … 4576#p4576
http://hp2133.umsw.de/xorg.conf
IMPORTANT: Booster votre (X et K)ubuntu: http://forum.ubuntu-fr.org/viewtopic.php?id=241092 (pfou!...)
à essayer, et... demain debian? http://fr.wikipedia.org/wiki/Demain_les_chiens
demain les biens? mes biens biens? t' exagére ... la banque!
Hors ligne
#10 Le 01/01/2009, à 16:44
- baignoire
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
youpi, résolu !!!
la solution a été de "lire le manuel" (RTFM!) et de bien copier le driver dans son repertoire (via.ko dans /usr/lib/xorg/modules/drivers ) , je m explique : j ai suivi les lignes du tuto : https://wiki.ubuntu.com/LaptopTestingTeam/HP2133#Video%20Driver%20Fix
The vesa driver works well for most tasks, however it does not support an external display. Via provides binary frame buffer (will not enable compiz effects) at this site. Select Ubuntu 8.10 and download the package (desktop is fine).
* Right click the downloaded file and click "Extract here"
* Go into the newly extracted folder and right click via.ko. Select copy.
* Press Alt F2 and type "gksu nautilus". Press Enter. Type your password.
* Navigate to /usr/lib/xorg/modules/drivers and Paste the file in the directory.
* Close nautilus.
* Press Alt F2 and type "gksu gedit /etc/X11/xorg.conf" Press Enter. Type your password.
* Edit "Driver" under the "Section Device" to read "via" instead of "vesa." Save and exit.Note: Using the via driver without explicitly defining the screen modes and refresh rates results in strange cycling colours. However it does work with the xorg.conf as provided above.
et y avait plus qu a changer la taille de l ecran en 1024x600 selon les posts #19 et #20 de cette discussion : http://forum.ubuntu-fr.org/viewtopic.php?pid=22702393
et voila c est tout bon ca marche !!
merci andso pour ton aide
Dernière modification par baignoire (Le 01/01/2009, à 16:47)
Hors ligne
#11 Le 01/01/2009, à 19:04
- Adirondack
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
J'ai installé le driver de chez via, mais le xorg.conf pose encore problème...
Baignoire, peux tu poster le contenu de ton xorg.conf ? (ton lien vers une autre discussion ne fonctionne pas...)
#12 Le 01/01/2009, à 19:09
- baignoire
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
le fameux lien : http://forum.ubuntu-fr.org/viewtopic.php?id=277039
mon xorg.conf :
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by reidy90, by copying correct settings from
# the xorg.conf that was provided with the SUSE hp 2133.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
BoardName "Framebuffer Graphics"
Driver "via"
Identifier "Device[0]"
Screen 0
VendorName "VIA Technology"
Option "NoDDCValue"
Option "ActiveDevice" "LCD,CRT"
Option "PanelID" "9"
Option "DisplayHardwareLayout" "LCD"
Option "ForceLCD"
#[<bool>]
Option "VideoOnDevice" "LCD"
# Option "LCDPort" "DVP0"
EndSection
Section "Monitor"
DisplaySize 250 150
HorizSync 28-500
Identifier "Monitor[0]"
ModelName "VIEWSONIC VA912-4SERIES"
Option "DPMS"
VendorName "VSC"
VertRefresh 43-60
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1280x800" 120.33 1280 1368 1504 1728 800 801 804 839
Modeline "1280x800" 118.88 1280 1368 1504 1728 800 801 804 839
Modeline "1280x800" 116.21 1280 1360 1496 1712 800 801 804 838
# Modeline "1280x768" 114.53 1280 1360 1496 1712 768 769 772 806
# Modeline "1280x768" 113.01 1280 1360 1496 1712 768 769 772 805
# Modeline "1280x768" 111.63 1280 1360 1496 1712 768 769 772 805
Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795 -HSync +Vsync
Modeline "1024x768" 92.05 1024 1088 1200 1376 768 769 772 806
Modeline "1024x768" 90.83 1024 1088 1200 1376 768 769 772 805
Modeline "1024x768" 89.72 1024 1088 1200 1376 768 769 772 805
Modeline "1280x600" 88.68 1280 1352 1488 1696 600 601 604 630
Modeline "1280x600" 87.48 1280 1352 1488 1696 600 601 604 629
Modeline "1280x600" 85.59 1280 1344 1480 1680 600 601 604 629
Modeline "1024x600" 71.11 1024 1080 1192 1360 600 601 604 630
Modeline "1024x600" 69.32 1024 1080 1184 1344 600 601 604 629
Modeline "1024x600" 68.48 1024 1080 1184 1344 600 601 604 629
Modeline "800x600" 55.22 800 840 928 1056 600 601 604 630
Modeline "800x600" 54.47 800 840 928 1056 600 601 604 629
Modeline "800x600" 53.80 800 840 928 1056 600 601 604 629
Modeline "768x576" 50.62 768 808 888 1008 576 577 580 605
Modeline "768x576" 49.92 768 808 888 1008 576 577 580 604
Modeline "768x576" 49.32 768 808 888 1008 576 577 580 604
Modeline "640x480" 34.80 640 672 736 832 480 481 484 504
Modeline "640x480" 34.38 640 672 736 832 480 481 484 504
Modeline "640x480" 33.90 640 672 736 832 480 481 484 503
EndSection
Section "Screen"
SubSection "Display"
Modes "1024x600"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
bon courage !
Dernière modification par baignoire (Le 01/01/2009, à 19:09)
Hors ligne
#13 Le 02/01/2009, à 00:30
- andso
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
pour info
This option is used to assign the value of panel ID.
According to the value of panel ID, you can determine the characteristics
of the panel. In general, it isn't necessary to set this option because you
can get panel ID from CMOS setting. But you also can set it manually to
fit for your requirement. The legal values of panel ID are listed below:
"0" #640x480, Single, Dithering
"1" #800x600, Single, Dithering
"2" #1024x768, Single, Dithering
"3" #1280x720, Single, Dithering
"4" #1280x1024, Dual, Dithering
"5" #1400x1050, Dual, Dithering
"7" #1280x800, Single, Dithering
"8" #800x480, Single, Dithering
"9" #1366x768, Single, Non-Dithering
"10" #1360x768, Single, Non-Dithering
"11" #1024x768, Dual, Non-Dithering
"12" #1280x768, Single, Non-Dithering
"13" #1280x1024, Dual, Non-Dithering
"14" #1600x1200, Dual, Non-Dithering
"15" #1600x1200, Dual, Non-Dithering
"16" #1280x768, Dual, Non_Dithering
"15" #1600x1200, Dual, Non-Dithering
"17" #1024x600, Single, Dithering
"18" #480x640 Single, Dithering
"19" #1440x900 Dual, Non_Dithering
ATTENTION pour le driver de la 8.04 Merci qui ? merci VIA
Dernière modification par andso (Le 04/01/2009, à 02:25)
IMPORTANT: Booster votre (X et K)ubuntu: http://forum.ubuntu-fr.org/viewtopic.php?id=241092 (pfou!...)
à essayer, et... demain debian? http://fr.wikipedia.org/wiki/Demain_les_chiens
demain les biens? mes biens biens? t' exagére ... la banque!
Hors ligne
#14 Le 03/01/2009, à 02:32
- Adirondack
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
J'ai fait tout comme "Baignoire" mais cela ne fonctionne pas
au démarrage j'ai le message suivant :
Ubuntu is running in low-graphics mode
(EE) via(0) : Couldn't open "/dev/video2"
#15 Le 03/01/2009, à 02:49
- andso
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
zut
pas pour toi, mais parce que ça marche pas
si un connaisseur passe postes le contenu de /var/log/xorg.0.log
il est tard, c' est pénible ces "détails"
tu as un hp2133 différent de celui de baignoire?
les ref c' est comme les fenêtres (la pub)
IMPORTANT: Booster votre (X et K)ubuntu: http://forum.ubuntu-fr.org/viewtopic.php?id=241092 (pfou!...)
à essayer, et... demain debian? http://fr.wikipedia.org/wiki/Demain_les_chiens
demain les biens? mes biens biens? t' exagére ... la banque!
Hors ligne
#16 Le 03/01/2009, à 15:09
- Joliveira
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
Bonjour j'ai le hp mini FU339EA.
J'ai réussi à installer Ubuntu 8.10 mais pour l'instant j'ai des problemes avec ma carte graphique.
Le seul résultat positif que j'obtiens est en suivant le tuto de cette page:
http://ubuntuforums.org/showthread.php?t=1000966
Probleme: Le bureau ubuntu dépasse de mon écran et je n'ai aucun moyen de changer cela
dans la résolution de l'écran.
#17 Le 03/01/2009, à 15:37
- baignoire
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
@joliv : as tu essayé comme décrit dans les messages #19 et #20 de la discussion : http://forum.ubuntu-fr.org/viewtopic.php?id=277039 ???
ca a marché impec chez moi
Hors ligne
#18 Le 03/01/2009, à 16:22
- Joliveira
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
Je viens de refaire l'installation du pilote via ainsi que la modif du xorg en suivant ce que tu m'as dis et je me retrouve toujours avec un blocage devant un écran noir après le démarrage.:/
I don't understand
#19 Le 03/01/2009, à 18:37
- Adirondack
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
Sur les conseils de anso voici le contenu de mon fichier /var/log/xorg.0.log
X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-19-server i686 Ubuntu
Current Operating System: Linux adirondack-laptop 2.6.27-9-generic #1 SMP Thu Nov 20 21:57:00 UTC 2008 i686
Build Date: 24 October 2008 08:00:16AM
xorg-server 2:1.5.2-2ubuntu3 (buildd@rothera.buildd)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 3 13:03:31 2009
(==) Using config file: "/etc/X11/xorg.conf.failsafe"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d9a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 10
(--) PCI:*(0@1:0:0) VIA Technologies, Inc. CN896/VN896/P4M900 [Chrome 9 HC] rev 1, Mem @ 0xd0000000/0, 0xfc000000/0, BIOS @ 0x????????/65536
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 32768 kB
(II) VESA(0): VESA VBE OEM: VIA N3364
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor:
(II) VESA(0): VESA VBE OEM Product:
(II) VESA(0): VESA VBE OEM Product Rev:
(II) VESA(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) VESA(0): Depth 24, (--) framebuffer bpp 32
(==) VESA(0): RGB weight 888
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): VESA VBE DDC Level 2
(II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
(II) VESA(0): VESA VBE DDC read failed
(II) VESA(0): Searching for matching VESA mode(s):
Mode: 101 (640x480)
ModeAttributes: 0x9f
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0xa000
WinFuncPtr: 0xc0007f83
BytesPerScanline: 640
XResolution: 640
YResolution: 480
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 101
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 2
PhysBasePtr: 0xd0000000
LinBytesPerScanLine: 640
BnkNumberOfImagePages: 101
LinNumberOfImagePages: 101
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 0
Mode: 111 (640x480)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0xa000
WinFuncPtr: 0xc0007f83
BytesPerScanline: 1280
XResolution: 640
YResolution: 480
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 50
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 2
PhysBasePtr: 0xd0000000
LinBytesPerScanLine: 1280
BnkNumberOfImagePages: 50
LinNumberOfImagePages: 50
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 0
*Mode: 112 (640x480)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0xa000
WinFuncPtr: 0xc0007f83
BytesPerScanline: 2560
XResolution: 640
YResolution: 480
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 25
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 2
PhysBasePtr: 0xd0000000
LinBytesPerScanLine: 2560
BnkNumberOfImagePages: 25
LinNumberOfImagePages: 25
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 0
(II) VESA(0): Total Memory: 512 64KB banks (32768kB)
(II) VESA(0): Configured Monitor: Using default hsync range of 31.50-37.90 kHz
(II) VESA(0): Configured Monitor: Using default vrefresh range of 50.00-70.00 Hz
(WW) VESA(0): Unable to estimate virtual size
(II) VESA(0): Not using built-in mode "640x480" (no mode of this name)
(WW) VESA(0): No valid modes left. Trying less strict filter...
(II) VESA(0): Configured Monitor: Using hsync range of 31.50-37.90 kHz
(II) VESA(0): Configured Monitor: Using vrefresh range of 50.00-70.00 Hz
(WW) VESA(0): Unable to estimate virtual size
(--) VESA(0): Virtual size is 640x480 (pitch 640)
(**) VESA(0): *Built-in mode "640x480"
(==) VESA(0): DPI set to (96, 96)
(II) VESA(0): Attempting to use 60Hz refresh for mode "640x480" (112)
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 32768 kB
(II) VESA(0): VESA VBE OEM: VIA N3364
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor:
(II) VESA(0): VESA VBE OEM Product:
(II) VESA(0): VESA VBE OEM Product Rev:
(II) VESA(0): virtual address = 0xb589e000,
physical address = 0xd0000000, size = 33554432
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(II) VESA(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.99
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 0.15.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 0.15.2
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(**) Option "Device" "/dev/input/event8"
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "fr"
(**) AT Translated Set 2 keyboard: xkb_layout: "fr"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Video Bus: xkb_model: "pc105"
(**) Option "xkb_layout" "fr"
(**) Video Bus: xkb_layout: "fr"
#20 Le 03/01/2009, à 19:28
- andso
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
Adirondack
ton xorg correspond à celui de baignoire en vesa post #3
Joliveira
si tu utilises le dernier xorg de baignoire une chose me gêne terriblement que je changerait en accord avec http://hp2133.umsw.de/xorg.conf mais il est en 1280*768
Section "Monitor"
DisplaySize 250 150
# HorizSync 28-500
HorizSync 30-113
VertRefresh 50-100
Identifier "Monitor[0]"
ModelName "VIEWSONIC VA912-4SERIES"
Option "DPMS"
VendorName "VSC"
# VertRefresh 43-60
UseModes "Modes[0]"
EndSection
il est sûr que HorizSync 28-500 n' existe pas
baignoire
tu pourrais poster ton xorg.0.log?
edit: quelles sont les résolutions max que peuvent prendre vos Hp puisqu' ils existe plusieurs modèles et c' est ce qui crée la confusion
edit 2 Joliveira quelle est la valeur de Option "PanelID" "?"
Dernière modification par andso (Le 03/01/2009, à 19:41)
IMPORTANT: Booster votre (X et K)ubuntu: http://forum.ubuntu-fr.org/viewtopic.php?id=241092 (pfou!...)
à essayer, et... demain debian? http://fr.wikipedia.org/wiki/Demain_les_chiens
demain les biens? mes biens biens? t' exagére ... la banque!
Hors ligne
#21 Le 04/01/2009, à 00:00
- Joliveira
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
Bonsoir, merci pour les infos!
Je viens de remplacer mon xorg par celui de baignoire et j'ai remplacé les horizsynch et vertsynch par ceux indiqués mais toujours rien. écran noir
J'utilise 17 pour le PanelID
Le seul xorg qui me donne un résultat est celui ci:
ftp://ftp.mangohabanero.com/public/ubuntu8.10-hp2133-compiz-info-2DEC2008/xorg.conf
Mais il me fait apparaitre une fenetre plus grande que mon écran et aucune modification possible dans la résolution d'écran.
Je ne réussi pas non plus à modifier ce dernier xorg pour l"adapter à mon écran.
#22 Le 04/01/2009, à 00:06
- typhoo
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
J'ai les mêmes problèmes que Adirondack !!! Et avec un xorg.conf trouvé sur le net j'ai eu le même problème que Joliveira !
Mon modèle FU339EA doit pouvoir faire du 1024*600
il a 1Go de ram et un DD de 120Go
Est-ce qu'un nouveau Xorg.0.log (Baignoire HELP!!!) suffirait ?
packard bell easy note sb89 P 023w on 10.10
hp mininote 2133 10.10
Hors ligne
#23 Le 04/01/2009, à 01:21
- andso
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
j' ai fait un xorg minimaliste que vous pouvez essayer
si ça marche pas postez le contenu de /var/log/xorg.0.log généré avec ce xorg
Section "Device"
Identifier "Device 0"
Driver "via"
VendorName "VIA Technology"
Option "NoDDCValue"
Option "ActiveDevice" "LCD" # si pas d' écran externe
# Option "PanelID" "17" # si ubuntu 8.04
Option "PanelID" "9" # si ubuntu 8.10
# Option "DisplayHardwareLayout" "LCD" # This option is for the chip (CX700, CX800) which have the internal
# LVDS/TMDS support Note: please do not set this options at the chipset which do not have
#internal transmitter(CN896, CN700).
Option "ForceLCD" "TRUE"
Option "VideoOnDevice" "LCD" # mettre CRT si écran externe
# Option "ActiveDevice" "LCD,CRT" # si écran externe
# Option "DeviceSwitchHotkey" # si écran externe
Option "Refresh" "60"
EndSection
Section "Monitor"
Identifier "Monitor 0"
# DisplaySize 250 150
DisplaySize 196 116 # typhoo post #33
HorizSync 28-50 # à confirmer ok
VertRefresh 43-60 # à confirmer ok
Option "DPMS"
Modeline "1024x600_60" 48.96 1024 1064 1168 1312 600 601 604 622 -hsync +vsync # http://hp2133.umsw.de/xorg.conf
EndSection
Section "Screen"
Identifier "Screen 0"
DefaultDepth 24
SubSection "Display"
Virtual 1024 600
Modes "1024x600_60"
EndSubSection
Device "Device 0"
Monitor "Monitor 0"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Screen 0"
# Option "RandR" "False" # d' après viax.conf but no resolution choice in xfce/gnome
EndSection
Dernière modification par andso (Le 06/01/2009, à 19:36)
IMPORTANT: Booster votre (X et K)ubuntu: http://forum.ubuntu-fr.org/viewtopic.php?id=241092 (pfou!...)
à essayer, et... demain debian? http://fr.wikipedia.org/wiki/Demain_les_chiens
demain les biens? mes biens biens? t' exagére ... la banque!
Hors ligne
#24 Le 04/01/2009, à 01:50
- Joliveira
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
Avec ce xorg je retrouve ma fenêtre plus grande que mon écran comme avec le xorg précédent
Je ne vois plus ma souris. je vais chercher encore un peu
#25 Le 04/01/2009, à 01:56
- Joliveira
Re : [resolu] HP mini 2133 . resolution bloquée a 640x480 (intrepid 8.10)
X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-19-server i686 Ubuntu
Current Operating System: Linux jose-folie 2.6.27-9-generic #1 SMP Thu Nov 20 21:57:00 UTC 2008 i686
Build Date: 24 October 2008 08:00:16AM
xorg-server 2:1.5.2-2ubuntu3 (buildd@rothera.buildd)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 4 00:41:34 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Screen[0]" (0)
(**) | |-->Monitor "Monitor[0]"
(**) | |-->Device "Device[0]"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d9a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) VIA Technologies, Inc. CN896/VN896/P4M900 [Chrome 9 HC] rev 1, Mem @ 0xd0000000/0, 0xfc000000/0, BIOS @ 0x????????/65536
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "via"
(II) Loading /usr/lib/xorg/modules/drivers//via_drv.so
(II) Module via: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 5.74.255
Module class: X.Org Video Driver
(II) via: driver for VIA chipsets: P4M800PRO, CX700, K8M890, P4M890,
P4M900, VX800, VX855
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(**) via(0): Depth 24, (--) framebuffer bpp 32
(==) via(0): RGB weight 888
(==) via(0): Default visual is TrueColor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) via(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) via(0): VESA BIOS detected
(II) via(0): VESA VBE Version 3.0
(II) via(0): VESA VBE Total Mem: 32768 kB
(II) via(0): VESA VBE OEM: VIA N3364
(II) via(0): VESA VBE OEM Software Rev: 1.0
(II) via(0): VESA VBE OEM Vendor:
(II) via(0): VESA VBE OEM Product:
(II) via(0): VESA VBE OEM Product Rev:
(II) via(0): MapBase = 0xb778e000, MmioBase=fc000000
(II) via(0): RegCR08 = 0, RegCR09=4f
(--) via(0): Chipset: "P4M900"
(--) via(0): Chipset Rev.: 0
(**) via(0): Option "ActiveDevice" "LCD"
(**) via(0): Option "DisplayHardwareLayout" "LCD"
(**) via(0): Option "PanelID" "17"
(**) via(0): Option "NoDDCValue"
(**) via(0): Option "VideoOnDevice" "LCD"
(**) via(0): Option "ForceLCD" "TRUE"
(==) via(0): Not using video BIOS to set modes
(**) via(0): Option: Not using DDC probed value to set HorizSync & VertRefresh
(==) via(0): Using XAA acceleration architecture.
(II) via(0): MergedFB mode forced off.
(**) via(0): Active Device is LCD.
(**) via(0): Display Hardware Layout is LCD
(**) via(0): (OPTION) Force enable LCD.
(**) via(0): (OPTION) LCD Panel ID is 17.
(**) via(0): TV scan mode is 0
(**) via(0): Option: Cap0 auto detect= 0
(**) via(0): Option: Cap1 auto detect= 0
(**) via(0): Option: Cap0_FieldSwap Disabled
(**) via(0): Option: Cap0_HFilter Enabled
(**) via(0): Option: Cap1_HFilter Enabled
(**) via(0): Option: Capture Over Scan ON
(**) via(0): Option: HQV Filter Manual Select Disabled
(**) via(0): Option: Set MPEG decode frame buffer number Disable
(**) via(0): Option: Capture 1 use H/W auto flip
(**) via(0): Option: Capture 0 use V1 engine : Default path
(**) via(0): Option: HQV Manual Switch Disabled
(**) via(0): Option: No mpeg add one line on bottom = 0
(**) via(0): Option: DeBlocking Disable!!
(**) via(0): DeBlocking Minimum Width Default : 320
(**) via(0): DeBlocking Minimum Height Default: 240
(**) via(0): Option: Use 2D BitBlt method to write event-tag into VQ and make sure MPEG decode END Disable
(**) via(0): Video has been set to LCD
(--) via(0): mapping MMIO @ 0xfc000000 with size 0x9000
(--) via(0): mapping BitBlt MMIO @ 0xfc200000 with size 0x200000
(II) via(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) via(0): Using gamma correction (1.0, 1.0, 1.0)
(--) via(0): videoram = 131072k
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) via(0): I2C bus "I2C bus 1" initialized.
(II) via(0): I2C bus "I2C bus 2" initialized.
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(==) via(0): DPI set to (96, 96)
(II) via(0): Output CRT using monitor section Monitor[0]
(II) via(0): Output LCD has no monitor section
(II) via(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) via(0): I2C device "I2C bus 1:ddc2" removed.
(II) via(0): Output CRT disconnected
(II) via(0): Output LCD connected
(II) via(0): Using exact sizes for initial modes
(II) via(0): Output LCD using initial mode 1360x768
(**) via(0): disable DVI Display SW scaling, It isn't HDMI
(II) via(0): VIASetDisplayPath is Single
(II) VIALoadVideoOption
(WW) No Video option file .VIAVIDEORC exist.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(--) via(0): mapping framebuffer @ 0xd0000000 with size 0x8000000
(--) via(0): Frame buffer start: 0xaf504000, free start: 0x70e400 end: 0x8000000
(--) via(0): mapping MMIO @ 0xfc000000 with size 0x9000
(--) via(0): mapping BitBlt MMIO @ 0xfc200000 with size 0x200000
(II) via(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(EE) via(0): Couldn't open "/dev/video2"
(II) via(0): VIAScreenInit : V4L Disabled : fd2 = -1
(II) via(0): [drm] Detect H5s1 chipset: 0005 chipid: 3371
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "via_chrome9"
(EE) via(0): DRM open error
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
[drm] failed to load kernel module "via_chrome9"
(EE) [drm] drmOpen failed.
(EE) via(0): [dri] DRIScreenInit failed. Disabling DRI.
(II) via(0): I2C device "I2C bus 2:TV" registered at address 0x40.
(II) via(0): I2C device "I2C bus 2:TV" removed.
(II) via(0): VIASetDisplayPath is Single
(II) via(0): VIALoadUserDuoViewVideoOutputDeviceSetting exit:TVtype=1, TVScan=0
(II) via(0): LCD Max Resolution 1360x768, set virtual desktop!!
(II) via(0): VIAFindModeUseBIOSTable exit:TVtype=1, TVScan=0
(II) via(0): VIADISP3DScalingParasSetting exit:TVtype=1, TVScan=0
(II) via(0): I2C device "I2C bus 2:TV" registered at address 0x40.
(II) via(0): I2C device "I2C bus 2:TV" removed.
(II) via(0): I2C device "I2C bus 2:TV" registered at address 0x40.
(II) via(0): I2C device "I2C bus 2:TV" removed.
(II) via(0): VIASetMode exit:TVtype=1, TVScan=0
(II) via(0): into 3D initial...3Dinitial? 0
(II) via(0): H5 3D Engine has been initilized.
(II) via(0): VIAWriteMode exit:TVtype=1, TVScan=0
(II) via(0): lpVIAGraphicInfo->dwXServerEnabled is 1
(EE) via(0): Couldn't open "/dev/video2"
(II) via(0): VIAModeInit exit:TVtype=1, TVScan=0
(II) via(0): VIAInternalScreenInit
(II) via(0): Frame Buffer From (0,0) To (1360,2047)
(II) via(0): Using 2047 lines for offscreen memory.
(II) via(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
CPU to Screen color expansion
Solid Lines
Dashed Lines
Image Writes
Setting up tile and stipple cache:
26 128x128 slots
6 256x256 slots
32 8x8 color pattern slots
(==) via(0): Backing store disabled
(==) via(0): Silken mouse enabled
(II) via(0): LCD Max Resolution 1360x768, set virtual desktop!!
(II) via(0): lpVIAGraphicInfo->dwXServerEnabled is 1
(II) via(0): RandR 1.2 enabled, ignore the following RandR disabled message.
Apply expand
(II) via(0): LCD Max Resolution 1360x768, set virtual desktop!!
(II) via(0): lpVIAGraphicInfo->dwXServerEnabled is 1
(**) Option "dpms"
(**) via(0): DPMS enabled
(II) via(0): direct rendering disabled
(II) via(0): lpVIAGraphicInfo->dwXServerEnabled is 1
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) via(0): Setting screen physical size to 359 x 203
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.99
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device SynPS/2 Synaptic s TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 0.15.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 0.15.2
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(**) Option "Device" "/dev/input/event10"
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "fr"
(**) AT Translated Set 2 keyboard: xkb_layout: "fr"
(**) Option "xkb_variant" "oss"
(**) AT Translated Set 2 keyboard: xkb_variant: "oss"
(II) config/hal: Adding input device PS/2+USB Mouse
(**) PS/2+USB Mouse: always reports core events
(**) PS/2+USB Mouse: Device: "/dev/input/event2"
(II) PS/2+USB Mouse: Found x and y relative axes
(II) PS/2+USB Mouse: Found 4 mouse buttons
(II) PS/2+USB Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "PS/2+USB Mouse" (type: MOUSE)
(**) PS/2+USB Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Video Bus: xkb_model: "pc105"
(**) Option "xkb_layout" "fr"
(**) Video Bus: xkb_layout: "fr"
(**) Option "xkb_variant" "oss"
(**) Video Bus: xkb_variant: "oss"
(II) via(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) via(0): I2C device "I2C bus 1:ddc2" removed.
AUDIT: Sun Jan 4 00:41:44 2009: 4960 X: client 4 rejected from local host ( uid=0 gid=0 pid=5144 )
AUDIT: Sun Jan 4 00:41:51 2009: 4960 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5148 )
AUDIT: Sun Jan 4 00:41:51 2009: 4960 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5149 )
AUDIT: Sun Jan 4 00:41:51 2009: 4960 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5150 )
(II) via(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) via(0): I2C device "I2C bus 1:ddc2" removed.
(II) via(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) via(0): I2C device "I2C bus 1:ddc2" removed.
(II) via(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) via(0): I2C device "I2C bus 1:ddc2" removed.
(II) via(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) via(0): I2C device "I2C bus 1:ddc2" removed.
(EE) PS/2+USB Mouse: Read error: No such device
(II) config/hal: removing device PS/2+USB Mouse
(II) PS/2+USB Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device PS/2+USB Mouse
(**) PS/2+USB Mouse: always reports core events
(**) PS/2+USB Mouse: Device: "/dev/input/event2"
(II) PS/2+USB Mouse: Found x and y relative axes
(II) PS/2+USB Mouse: Found 4 mouse buttons
(II) PS/2+USB Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "PS/2+USB Mouse" (type: MOUSE)
(**) PS/2+USB Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-19-server i686 Ubuntu
Current Operating System: Linux jose-folie 2.6.27-9-generic #1 SMP Thu Nov 20 21:57:00 UTC 2008 i686
Build Date: 24 October 2008 08:00:16AM
xorg-server 2:1.5.2-2ubuntu3 (buildd@rothera.buildd)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 4 00:41:34 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Screen[0]" (0)
(**) | |-->Monitor "Monitor[0]"
(**) | |-->Device "Device[0]"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d9a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) VIA Technologies, Inc. CN896/VN896/P4M900 [Chrome 9 HC] rev 1, Mem @ 0xd0000000/0, 0xfc000000/0, BIOS @ 0x????????/65536
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "via"
(II) Loading /usr/lib/xorg/modules/drivers//via_drv.so
(II) Module via: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 5.74.255
Module class: X.Org Video Driver
(II) via: driver for VIA chipsets: P4M800PRO, CX700, K8M890, P4M890,
P4M900, VX800, VX855
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(**) via(0): Depth 24, (--) framebuffer bpp 32
(==) via(0): RGB weight 888
(==) via(0): Default visual is TrueColor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) via(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) via(0): VESA BIOS detected
(II) via(0): VESA VBE Version 3.0
(II) via(0): VESA VBE Total Mem: 32768 kB
(II) via(0): VESA VBE OEM: VIA N3364
(II) via(0): VESA VBE OEM Software Rev: 1.0
(II) via(0): VESA VBE OEM Vendor:
(II) via(0): VESA VBE OEM Product:
(II) via(0): VESA VBE OEM Product Rev:
(II) via(0): MapBase = 0xb778e000, MmioBase=fc000000
(II) via(0): RegCR08 = 0, RegCR09=4f
(--) via(0): Chipset: "P4M900"
(--) via(0): Chipset Rev.: 0
(**) via(0): Option "ActiveDevice" "LCD"
(**) via(0): Option "DisplayHardwareLayout" "LCD"
(**) via(0): Option "PanelID" "17"
(**) via(0): Option "NoDDCValue"
(**) via(0): Option "VideoOnDevice" "LCD"
(**) via(0): Option "ForceLCD" "TRUE"
(==) via(0): Not using video BIOS to set modes
(**) via(0): Option: Not using DDC probed value to set HorizSync & VertRefresh
(==) via(0): Using XAA acceleration architecture.
(II) via(0): MergedFB mode forced off.
(**) via(0): Active Device is LCD.
(**) via(0): Display Hardware Layout is LCD
(**) via(0): (OPTION) Force enable LCD.
(**) via(0): (OPTION) LCD Panel ID is 17.
(**) via(0): TV scan mode is 0
(**) via(0): Option: Cap0 auto detect= 0
(**) via(0): Option: Cap1 auto detect= 0
(**) via(0): Option: Cap0_FieldSwap Disabled
(**) via(0): Option: Cap0_HFilter Enabled
(**) via(0): Option: Cap1_HFilter Enabled
(**) via(0): Option: Capture Over Scan ON
(**) via(0): Option: HQV Filter Manual Select Disabled
(**) via(0): Option: Set MPEG decode frame buffer number Disable
(**) via(0): Option: Capture 1 use H/W auto flip
(**) via(0): Option: Capture 0 use V1 engine : Default path
(**) via(0): Option: HQV Manual Switch Disabled
(**) via(0): Option: No mpeg add one line on bottom = 0
(**) via(0): Option: DeBlocking Disable!!
(**) via(0): DeBlocking Minimum Width Default : 320
(**) via(0): DeBlocking Minimum Height Default: 240
(**) via(0): Option: Use 2D BitBlt method to write event-tag into VQ and make sure MPEG decode END Disable
(**) via(0): Video has been set to LCD
(--) via(0): mapping MMIO @ 0xfc000000 with size 0x9000
(--) via(0): mapping BitBlt MMIO @ 0xfc200000 with size 0x200000
(II) via(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) via(0): Using gamma correction (1.0, 1.0, 1.0)
(--) via(0): videoram = 131072k
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) via(0): I2C bus "I2C bus 1" initialized.
(II) via(0): I2C bus "I2C bus 2" initialized.
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(==) via(0): DPI set to (96, 96)
(II) via(0): Output CRT using monitor section Monitor[0]
(II) via(0): Output LCD has no monitor section
(II) via(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) via(0): I2C device "I2C bus 1:ddc2" removed.
(II) via(0): Output CRT disconnected
(II) via(0): Output LCD connected
(II) via(0): Using exact sizes for initial modes
(II) via(0): Output LCD using initial mode 1360x768
(**) via(0): disable DVI Display SW scaling, It isn't HDMI
(II) via(0): VIASetDisplayPath is Single
(II) VIALoadVideoOption
(WW) No Video option file .VIAVIDEORC exist.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(--) via(0): mapping framebuffer @ 0xd0000000 with size 0x8000000
(--) via(0): Frame buffer start: 0xaf504000, free start: 0x70e400 end: 0x8000000
(--) via(0): mapping MMIO @ 0xfc000000 with size 0x9000
(--) via(0): mapping BitBlt MMIO @ 0xfc200000 with size 0x200000
(II) via(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(EE) via(0): Couldn't open "/dev/video2"
(II) via(0): VIAScreenInit : V4L Disabled : fd2 = -1
(II) via(0): [drm] Detect H5s1 chipset: 0005 chipid: 3371
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "via_chrome9"
(EE) via(0): DRM open error
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
[drm] failed to load kernel module "via_chrome9"
(EE) [drm] drmOpen failed.
(EE) via(0): [dri] DRIScreenInit failed. Disabling DRI.
(II) via(0): I2C device "I2C bus 2:TV" registered at address 0x40.
(II) via(0): I2C device "I2C bus 2:TV" removed.
(II) via(0): VIASetDisplayPath is Single
(II) via(0): VIALoadUserDuoViewVideoOutputDeviceSetting exit:TVtype=1, TVScan=0
(II) via(0): LCD Max Resolution 1360x768, set virtual desktop!!
(II) via(0): VIAFindModeUseBIOSTable exit:TVtype=1, TVScan=0
(II) via(0): VIADISP3DScalingParasSetting exit:TVtype=1, TVScan=0
(II) via(0): I2C device "I2C bus 2:TV" registered at address 0x40.
(II) via(0): I2C device "I2C bus 2:TV" removed.
(II) via(0): I2C device "I2C bus 2:TV" registered at address 0x40.
(II) via(0): I2C device "I2C bus 2:TV" removed.
(II) via(0): VIASetMode exit:TVtype=1, TVScan=0
(II) via(0): into 3D initial...3Dinitial? 0
(II) via(0): H5 3D Engine has been initilized.
(II) via(0): VIAWriteMode exit:TVtype=1, TVScan=0
(II) via(0): lpVIAGraphicInfo->dwXServerEnabled is 1
(EE) via(0): Couldn't open "/dev/video2"
(II) via(0): VIAModeInit exit:TVtype=1, TVScan=0
(II) via(0): VIAInternalScreenInit
(II) via(0): Frame Buffer From (0,0) To (1360,2047)
(II) via(0): Using 2047 lines for offscreen memory.
(II) via(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
CPU to Screen color expansion
Solid Lines
Dashed Lines
Image Writes
Setting up tile and stipple cache:
26 128x128 slots
6 256x256 slots
32 8x8 color pattern slots
(==) via(0): Backing store disabled
(==) via(0): Silken mouse enabled
(II) via(0): LCD Max Resolution 1360x768, set virtual desktop!!
(II) via(0): lpVIAGraphicInfo->dwXServerEnabled is 1
(II) via(0): RandR 1.2 enabled, ignore the following RandR disabled message.
Apply expand
(II) via(0): LCD Max Resolution 1360x768, set virtual desktop!!
(II) via(0): lpVIAGraphicInfo->dwXServerEnabled is 1
(**) Option "dpms"
(**) via(0): DPMS enabled
(II) via(0): direct rendering disabled
(II) via(0): lpVIAGraphicInfo->dwXServerEnabled is 1
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) via(0): Setting screen physical size to 359 x 203
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.99
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device SynPS/2 Synaptic s TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 0.15.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 0.15.2
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(**) Option "Device" "/dev/input/event10"
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "fr"
(**) AT Translated Set 2 keyboard: xkb_layout: "fr"
(**) Option "xkb_variant" "oss"
(**) AT Translated Set 2 keyboard: xkb_variant: "oss"
(II) config/hal: Adding input device PS/2+USB Mouse
(**) PS/2+USB Mouse: always reports core events
(**) PS/2+USB Mouse: Device: "/dev/input/event2"
(II) PS/2+USB Mouse: Found x and y relative axes
(II) PS/2+USB Mouse: Found 4 mouse buttons
(II) PS/2+USB Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "PS/2+USB Mouse" (type: MOUSE)
(**) PS/2+USB Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Video Bus: xkb_model: "pc105"
(**) Option "xkb_layout" "fr"
(**) Video Bus: xkb_layout: "fr"
(**) Option "xkb_variant" "oss"
(**) Video Bus: xkb_variant: "oss"
(II) via(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) via(0): I2C device "I2C bus 1:ddc2" removed.
AUDIT: Sun Jan 4 00:41:44 2009: 4960 X: client 4 rejected from local host ( uid=0 gid=0 pid=5144 )
AUDIT: Sun Jan 4 00:41:51 2009: 4960 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5148 )
AUDIT: Sun Jan 4 00:41:51 2009: 4960 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5149 )
AUDIT: Sun Jan 4 00:41:51 2009: 4960 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5150 )
(II) via(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) via(0): I2C device "I2C bus 1:ddc2" removed.
(II) via(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) via(0): I2C device "I2C bus 1:ddc2" removed.
(II) via(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) via(0): I2C device "I2C bus 1:ddc2" removed.
(II) via(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) via(0): I2C device "I2C bus 1:ddc2" removed.
(EE) PS/2+USB Mouse: Read error: No such device
(II) config/hal: removing device PS/2+USB Mouse
(II) PS/2+USB Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device PS/2+USB Mouse
(**) PS/2+USB Mouse: always reports core events
(**) PS/2+USB Mouse: Device: "/dev/input/event2"
(II) PS/2+USB Mouse: Found x and y relative axes
(II) PS/2+USB Mouse: Found 4 mouse buttons
(II) PS/2+USB Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "PS/2+USB Mouse" (type: MOUSE)
(**) PS/2+USB Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200