probleme avec ma cle tnt

serced · Le 28/07/2009, à 17:33

Bonjour
Connaissez vous un logiciel pour ma cle tv tnt EMTEC (S810) de chez INTUIX
Je suis un nouvel utilisateur
Merci

toitoinebzh · Le 28/07/2009, à 18:58

salut
petite balade sur la doc

http://doc.ubuntu-fr.org/s810
http://doc.ubuntu-fr.org/tnt

serced · Le 28/07/2009, à 20:10

rien ou je suis vraiment nul ou ............:mad:

serced · Le 28/07/2009, à 20:34

Heeeeeeeeeeeeellllllllllllpppppppppppppp Me

toitoinebzh · Le 28/07/2009, à 23:37

le premier lien t'indique comment faire si ta clé n'est pas reconnu
et

Branchez votre clé, installez Kaffeine, scannez les chaines, et voilà !

quelqu'un qui s'en est sorti
http://forum.ubuntu-fr.org/viewtopic.php?id=334787

Dernière modification par toitoinebzh (Le 28/07/2009, à 23:40)

serced · Le 30/07/2009, à 19:02

je fais et refais tout mais rien..............

compte supprimé · Le 30/07/2009, à 19:57

Et avec me-tv?
Sinon branche ta clé usb, et de suite après tape dans un terminal:

dmesg

Et copie/colle ce que ça t'envoie.

serced · Le 30/07/2009, à 19:58

et ca fais quoi
je le copi ou?

Dernière modification par serced (Le 30/07/2009, à 20:14)

compte supprimé · Le 30/07/2009, à 20:44

Ça nous dira précisemment le modèle de clé TNT que tu utilise (et pas la marque, donnée relativement inutile s'il en est). Et tu le met ici, qu'on puisse voir .

serced · Le 30/07/2009, à 20:56

[ 0.004000] vmalloc : 0xdc770000 - 0xff3fe000 ( 556 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdbf70000 ( 447 MB)
[ 0.004000] .init : 0xc0731000 - 0xc07b6000 ( 532 kB)
[ 0.004000] .data : 0xc0504def - 0xc0729e60 (2196 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0504def (4115 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004038] Calibrating delay loop (skipped), value calculated using timer frequency.. 3190.00 BogoMIPS (lpj=6380004)
[ 0.004108] Security Framework initialized
[ 0.004143] SELinux: Disabled at boot.
[ 0.004209] AppArmor: AppArmor initialized
[ 0.004255] Mount-cache hash table entries: 512
[ 0.004781] Initializing cgroup subsys ns
[ 0.004800] Initializing cgroup subsys cpuacct
[ 0.004810] Initializing cgroup subsys memory
[ 0.004829] Initializing cgroup subsys freezer
[ 0.004891] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004907] CPU: L2 cache: 512K
[ 0.004922] CPU: Hyper-Threading is disabled
[ 0.004976] Checking 'hlt' instruction... OK.
[ 0.022612] SMP alternatives: switching to UP code
[ 0.394583] Freeing SMP alternatives: 18k freed
[ 0.394602] ACPI: Core revision 20080926
[ 0.412570] ACPI: Checking initramfs for custom DSDT
[ 1.434987] ACPI: setting ELCR to 0200 (from 0420)
[ 1.436120] weird, boot CPU (#0) not listedby the BIOS.
[ 1.436125] SMP motherboard not detected.
[ 1.436130] Local APIC not detected. Using dummy APIC emulation.
[ 1.436134] SMP disabled
[ 1.436688] Brought up 1 CPUs
[ 1.436695] Total of 1 processors activated (3190.00 BogoMIPS).
[ 1.436723] CPU0 attaching NULL sched-domain.
[ 1.440258] net_namespace: 776 bytes
[ 1.440291] Booting paravirtualized kernel on bare hardware
[ 1.440768] Time: 18:34:17 Date: 07/30/09
[ 1.440781] regulator: core version 0.5
[ 1.440860] NET: Registered protocol family 16
[ 1.441139] EISA bus registered
[ 1.441173] ACPI: bus type pci registered
[ 1.499402] PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=2
[ 1.499407] PCI: Using configuration type 1 for base access
[ 1.503134] ACPI: EC: Look up EC in DSDT
[ 1.517236] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 1.517343] ACPI: Interpreter enabled
[ 1.517343] ACPI: (supports S0 S3 S4 S5)
[ 1.517343] ACPI: Using PIC for interrupt routing
[ 1.532759] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 1.532765] ACPI: EC: driver started in interrupt mode
[ 1.532968] ACPI: No dock devices found.
[ 1.532989] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.533073] pci 0000:00:00.0: reg 10 32bit mmio: [0xd4000000-0xd7ffffff]
[ 1.533082] pci 0000:00:00.0: reg 14 32bit mmio: [0xd0009000-0xd0009fff]
[ 1.533172] pci 0000:00:06.0: reg 10 io port: [0x1000-0x10ff]
[ 1.533181] pci 0000:00:06.0: reg 14 32bit mmio: [0xd0000000-0xd0000fff]
[ 1.533214] pci 0000:00:06.0: supports D1 D2
[ 1.533218] pci 0000:00:06.0: PME# supported from D2 D3hot D3cold
[ 1.533224] pci 0000:00:06.0: PME# disabled
[ 1.533328] pci 0000:00:08.0: reg 10 32bit mmio: [0xd0001000-0xd0001fff]
[ 1.533337] pci 0000:00:08.0: reg 14 io port: [0x1400-0x14ff]
[ 1.533370] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 1.533376] pci 0000:00:08.0: PME# disabled
[ 1.533412] pci 0000:00:0a.0: reg 10 32bit mmio: [0xd0002000-0xd0002fff]
[ 1.533424] pci 0000:00:0a.0: supports D1 D2
[ 1.533428] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.533434] pci 0000:00:0a.0: PME# disabled
[ 1.533484] pci 0000:00:0b.0: reg 20 io port: [0x2000-0x201f]
[ 1.533551] pci 0000:00:0b.1: reg 20 io port: [0x2020-0x203f]
[ 1.533601] pci 0000:00:0b.2: reg 10 32bit mmio: [0xd0003000-0xd00030ff]
[ 1.533639] pci 0000:00:0b.2: PME# supported from D0 D3hot
[ 1.533644] pci 0000:00:0b.2: PME# disabled
[ 1.533684] pci 0000:00:0c.0: reg 10 32bit mmio: [0xd0003800-0xd0003fff]
[ 1.533694] pci 0000:00:0c.0: reg 14 32bit mmio: [0xd0004000-0xd0007fff]
[ 1.533728] pci 0000:00:0c.0: supports D1 D2
[ 1.533731] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot
[ 1.533737] pci 0000:00:0c.0: PME# disabled
[ 1.533790] pci 0000:00:10.0: reg 20 io port: [0x2040-0x204f]
[ 1.533867] pci 0000:00:11.0: quirk: region 8000-803f claimed by ali7101 ACPI
[ 1.533872] pci 0000:00:11.0: quirk: region 8040-805f claimed by ali7101 SMB
[ 1.533909] pci 0000:00:12.0: reg 10 io port: [0x2400-0x24ff]
[ 1.533918] pci 0000:00:12.0: reg 14 32bit mmio: [0xd0008000-0xd0008fff]
[ 1.533944] pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 1.533955] pci 0000:00:12.0: supports D1 D2
[ 1.533959] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.533965] pci 0000:00:12.0: PME# disabled
[ 1.534032] pci 0000:01:05.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
[ 1.534040] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
[ 1.534049] pci 0000:01:05.0: reg 18 32bit mmio: [0xd0300000-0xd030ffff]
[ 1.534069] pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 1.534083] pci 0000:01:05.0: supports D1 D2
[ 1.534125] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[ 1.534132] pci 0000:00:01.0: bridge 32bit mmio: [0xd0300000-0xd03fffff]
[ 1.534139] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff]
[ 1.534165] bus 00 -> node 0
[ 1.534176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.534342] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 1.537430] ACPI: PCI Interrupt Link [LNK0] (IRQs 7 10) *0, disabled.
[ 1.537739] ACPI: PCI Interrupt Link [LNK1] (IRQs 7 *10)
[ 1.538043] ACPI: PCI Interrupt Link [LNK2] (IRQs 7 *10)
[ 1.538346] ACPI: PCI Interrupt Link [LNK3] (IRQs 7 *10)
[ 1.538648] ACPI: PCI Interrupt Link [LNK4] (IRQs 7 10) *0, disabled.
[ 1.538953] ACPI: PCI Interrupt Link [LNK5] (IRQs 7 *11)
[ 1.539256] ACPI: PCI Interrupt Link [LNK6] (IRQs 7 10) *0, disabled.
[ 1.539562] ACPI: PCI Interrupt Link [LNK7] (IRQs *5)
[ 1.539864] ACPI: PCI Interrupt Link [LNK8] (IRQs 7 10) *0, disabled.
[ 1.540129] ACPI: WMI: Mapper loaded
[ 1.540576] SCSI subsystem initialized
[ 1.540655] libata version 3.00 loaded.
[ 1.540759] usbcore: registered new interface driver usbfs
[ 1.540798] usbcore: registered new interface driver hub
[ 1.540853] usbcore: registered new device driver usb
[ 1.541088] PCI: Using ACPI for IRQ routing
[ 1.541242] Bluetooth: Core ver 2.13
[ 1.541242] NET: Registered protocol family 31
[ 1.541242] Bluetooth: HCI device and connection manager initialized
[ 1.541242] Bluetooth: HCI socket layer initialized
[ 1.541242] NET: Registered protocol family 8
[ 1.541242] NET: Registered protocol family 20
[ 1.541242] NetLabel: Initializing
[ 1.541242] NetLabel: domain hash size = 128
[ 1.541242] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.541242] NetLabel: unlabeled traffic allowed by default
[ 1.541242] AppArmor: AppArmor Filesystem Enabled
[ 1.541242] pnp: PnP ACPI init
[ 1.541242] ACPI: bus type pnp registered
[ 1.544746] pnp 00:07: io resource (0x8004-0x8005) overlaps 0000:00:11.0 BAR 7 (0x8000-0x803f), disabling
[ 1.549781] pnp: PnP ACPI: found 11 devices
[ 1.549787] ACPI: ACPI bus type pnp unregistered
[ 1.549796] PnPBIOS: Disabled by ACPI PNP
[ 1.549824] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 1.549829] system 00:07: ioport range 0x480-0x48f has been reserved
[ 1.549834] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 1.549839] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 1.549844] system 00:07: ioport range 0x8000-0x807f could not be reserved
[ 1.549849] system 00:07: ioport range 0xff00-0xff01 has been reserved
[ 1.549854] system 00:07: ioport range 0x80f0-0x80f3 has been reserved
[ 1.549858] system 00:07: ioport range 0xfe00-0xfefe has been reserved
[ 1.549865] system 00:07: iomem range 0xd0009000-0xd0009fff has been reserved
[ 1.584778] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.584785] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 1.584792] pci 0000:00:01.0: MEM window: 0xd0300000-0xd03fffff
[ 1.584798] pci 0000:00:01.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff
[ 1.584806] pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02
[ 1.584810] pci 0000:00:0a.0: IO window: 0x001800-0x0018ff
[ 1.584816] pci 0000:00:0a.0: IO window: 0x001c00-0x001cff
[ 1.584823] pci 0000:00:0a.0: PREFETCH window: 0x30000000-0x33ffffff
[ 1.584829] pci 0000:00:0a.0: MEM window: 0x34000000-0x37ffffff
[ 1.584852] pci 0000:00:0a.0: enabling device (0005 -> 0007)
[ 1.585257] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11
[ 1.585264] PCI: setting IRQ 11 as level-triggered
[ 1.585272] pci 0000:00:0a.0: PCI INT A -> Link[LNK5] -> GSI 11 (level, low) -> IRQ 11
[ 1.585282] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.585286] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 1.585290] bus: 01 index 0 io port: [0x9000-0x9fff]
[ 1.585294] bus: 01 index 1 mmio: [0xd0300000-0xd03fffff]
[ 1.585298] bus: 01 index 2 mmio: [0xd8000000-0xdfffffff]
[ 1.585302] bus: 01 index 3 mmio: [0x0-0x0]
[ 1.585306] bus: 02 index 0 io port: [0x1800-0x18ff]
[ 1.585310] bus: 02 index 1 io port: [0x1c00-0x1cff]
[ 1.585314] bus: 02 index 2 mmio: [0x30000000-0x33ffffff]
[ 1.585318] bus: 02 index 3 mmio: [0x34000000-0x37ffffff]
[ 1.585336] NET: Registered protocol family 2
[ 1.585596] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 1.586041] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.586179] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.586303] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.586308] TCP reno registered
[ 1.586472] NET: Registered protocol family 1
[ 1.586725] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 2.100663] it is
[ 2.675907] Freeing initrd memory: 7368k freed
[ 2.676114] Simple Boot Flag at 0x37 set to 0x1
[ 2.676182] cpufreq: No nForce2 chipset.
[ 2.676540] audit: initializing netlink socket (disabled)
[ 2.676588] type=2000 audit(1248978858.676:1): initialized
[ 2.688821] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.691101] VFS: Disk quotas dquot_6.5.1
[ 2.691216] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.692484] fuse init (API version 7.10)
[ 2.692651] msgmni has been set to 866
[ 2.693056] alg: No test for stdrng (krng)
[ 2.693082] io scheduler noop registered
[ 2.693086] io scheduler anticipatory registered
[ 2.693090] io scheduler deadline registered
[ 2.693128] io scheduler cfq registered (default)
[ 2.693182] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 2.693264] pci 0000:01:05.0: Boot video device
[ 2.699453] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.699476] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.699923] ACPI: AC Adapter [ACAD] (on-line)
[ 2.700247] ACPI: Battery Slot [BAT1] (battery absent)
[ 2.700374] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.700379] ACPI: Power Button (FF) [PWRF]
[ 2.700474] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.700480] ACPI: Power Button (CM) [PWRB]
[ 2.700568] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 2.706732] ACPI: Lid Switch [LID]
[ 2.707213] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 2.707270] processor ACPI_CPU:00: registered as cooling_device0
[ 2.712522] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.717896] ACPI: Thermal Zone [THRM] (39 C)
[ 2.717988] isapnp: Scanning for PnP cards...
[ 3.072332] isapnp: No Plug & Play device found
[ 3.074706] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 3.074910] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.075460] serial 0000:00:08.0: enabling device (0000 -> 0003)
[ 3.075920] ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 10
[ 3.075927] PCI: setting IRQ 10 as level-triggered
[ 3.075934] serial 0000:00:08.0: PCI INT A -> Link[LNK6] -> GSI 10 (level, low) -> IRQ 10
[ 3.075945] serial 0000:00:08.0: PCI INT A disabled
[ 3.077372] brd: module loaded
[ 3.078030] loop: module loaded
[ 3.078246] Fixed MDIO Bus: probed
[ 3.078259] PPP generic driver version 2.4.2
[ 3.078398] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 3.078470] Driver 'sd' needs updating - please use bus_type methods
[ 3.078490] Driver 'sr' needs updating - please use bus_type methods
[ 3.078934] pata_ali 0000:00:10.0: can't derive routing for PCI INT A
[ 3.079265] scsi0 : pata_ali
[ 3.079486] scsi1 : pata_ali
[ 3.079911] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2040 irq 14
[ 3.079916] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2048 irq 15
[ 3.244472] ata1.00: ATA-7: SAMSUNG HM080HC, AM100-16, max UDMA/100
[ 3.244478] ata1.00: 156301488 sectors, multi 16: LBA48
[ 3.260427] ata1.00: configured for UDMA/100
[ 3.424364] ata2.00: ATAPI: HL-DT-ST DVD+RW GCA-4040N, 1.15, max MWDMA2
[ 3.424415] ata2.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled
[ 3.424420] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[ 3.440346] ata2.00: configured for MWDMA2
[ 3.441641] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM080HC AM10 PQ: 0 ANSI: 5
[ 3.441853] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 3.441889] sd 0:0:0:0: [sda] Write Protect is off
[ 3.441894] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.441947] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.442094] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 3.442123] sd 0:0:0:0: [sda] Write Protect is off
[ 3.442128] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.442179] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.442186] sda: sda1 sda2 < sda5 >
[ 3.492544] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.492675] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.493396] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+RW GCA-4040N 1.15 PQ: 0 ANSI: 5
[ 3.496641] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 3.496648] Uniform CD-ROM driver Revision: 3.20
[ 3.496872] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.496971] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.497875] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.497909] ehci_hcd 0000:00:0b.2: enabling device (0010 -> 0012)
[ 3.497929] ehci_hcd 0000:00:0b.2: PCI INT C -> Link[LNK5] -> GSI 11 (level, low) -> IRQ 11
[ 3.497973] ehci_hcd 0000:00:0b.2: EHCI Host Controller
[ 3.498113] ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 1
[ 3.498178] ehci_hcd 0000:00:0b.2: irq 11, io mem 0xd0003000
[ 3.508067] ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 0.95
[ 3.508237] usb usb1: configuration #1 chosen from 1 choice
[ 3.508296] hub 1-0:1.0: USB hub found
[ 3.508315] hub 1-0:1.0: 4 ports detected
[ 3.508526] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.508576] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.509143] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
[ 3.509153] uhci_hcd 0000:00:0b.0: PCI INT A -> Link[LNK2] -> GSI 10 (level, low) -> IRQ 10
[ 3.509170] uhci_hcd 0000:00:0b.0: UHCI Host Controller
[ 3.509280] uhci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 3.509314] uhci_hcd 0000:00:0b.0: irq 10, io base 0x00002000
[ 3.509475] usb usb2: configuration #1 chosen from 1 choice
[ 3.509528] hub 2-0:1.0: USB hub found
[ 3.509545] hub 2-0:1.0: 2 ports detected
[ 3.510120] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 10
[ 3.510128] uhci_hcd 0000:00:0b.1: PCI INT B -> Link[LNK3] -> GSI 10 (level, low) -> IRQ 10
[ 3.510139] uhci_hcd 0000:00:0b.1: UHCI Host Controller
[ 3.510235] uhci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 3
[ 3.510262] uhci_hcd 0000:00:0b.1: irq 10, io base 0x00002020
[ 3.510408] usb usb3: configuration #1 chosen from 1 choice
[ 3.510461] hub 3-0:1.0: USB hub found
[ 3.510476] hub 3-0:1.0: 2 ports detected
[ 3.510751] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 3.513229] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.513244] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.513480] mice: PS/2 mouse device common for all mice
[ 3.513870] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.513908] rtc0: alarms up to one month, y3k, 242 bytes nvram
[ 3.514068] device-mapper: uevent: version 1.0.3
[ 3.514305] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.514395] device-mapper: multipath: version 1.0.5 loaded
[ 3.514402] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.514582] EISA: Probing bus 0 at eisa.0
[ 3.514596] Cannot allocate resource for EISA slot 1
[ 3.514601] Cannot allocate resource for EISA slot 2
[ 3.514633] Cannot allocate resource for EISA slot 8
[ 3.514636] EISA: Detected 0 cards.
[ 3.514749] cpuidle: using governor ladder
[ 3.514843] cpuidle: using governor menu
[ 3.515846] TCP cubic registered
[ 3.515985] NET: Registered protocol family 10
[ 3.516756] lo: Disabled Privacy Extensions
[ 3.517336] NET: Registered protocol family 17
[ 3.517381] Bluetooth: L2CAP ver 2.11
[ 3.517385] Bluetooth: L2CAP socket layer initialized
[ 3.517391] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.517394] Bluetooth: SCO socket layer initialized
[ 3.517464] Bluetooth: RFCOMM socket layer initialized
[ 3.517484] Bluetooth: RFCOMM TTY layer initialized
[ 3.517488] Bluetooth: RFCOMM ver 1.10
[ 3.517654] Marking TSC unstable due to cpufreq changes
[ 3.518667] IO APIC resources could be not be allocated.
[ 3.518718] Using IPI No-Shortcut mode
[ 3.518889] registered taskstats version 1
[ 3.519051] Magic number: 1:201:596
[ 3.519216] rtc_cmos 00:02: setting system clock to 2009-07-30 18:34:20 UTC (1248978860)
[ 3.519220] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.519223] EDD information not available.
[ 3.520681] Freeing unused kernel memory: 532k freed
[ 3.520835] Write protecting the kernel text: 4116k
[ 3.520876] Write protecting the kernel read-only data: 1524k
[ 3.567595] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.820102] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 3.953115] usb 1-3: configuration #1 chosen from 1 choice
[ 4.084064] Clocksource tsc unstable (delta = 333302742 ns)
[ 4.197610] Floppy drive(s): fd0 is 1.44M
[ 4.215422] FDC 0 is a post-1991 82077
[ 4.360105] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 4.534196] usb 3-2: configuration #1 chosen from 1 choice
[ 4.665163] ohci1394 0000:00:0c.0: enabling device (0010 -> 0012)
[ 4.665178] ohci1394 0000:00:0c.0: PCI INT A -> Link[LNK2] -> GSI 10 (level, low) -> IRQ 10
[ 4.715033] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d0003800-d0003fff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.800972] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[ 4.800975] originally by Donald Becker <becker@scyld.com>
[ 4.800976] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[ 4.801421] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
[ 4.801428] natsemi 0000:00:12.0: PCI INT A -> Link[LNK1] -> GSI 10 (level, low) -> IRQ 10
[ 4.803833] natsemi eth0: NatSemi DP8381[56] at 0xd0008000 (0000:00:12.0), 00:0d:9d:8b:4c:ea, IRQ 10, port TP.
[ 5.609573] usbcore: registered new interface driver hiddev
[ 5.623539] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:0b.1/usb3/3-2/3-2:1.0/input/input5
[ 5.628824] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:0b.1-2/input0
[ 5.628863] usbcore: registered new interface driver usbhid
[ 5.628870] usbhid: v2.6:USB HID core driver
[ 5.685490] PM: Starting manual resume from disk
[ 5.685496] PM: Resume from partition 8:5
[ 5.685499] PM: Checking hibernation image.
[ 5.685808] PM: Resume from disk failed.
[ 5.740251] kjournald starting. Commit interval 5 seconds
[ 5.740273] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.044241] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000d9d71a08bb918]
[ 11.784777] udev: starting version 141
[ 12.077839] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.156186] Linux agpgart interface v0.103
[ 12.484467] yenta_cardbus 0000:00:0a.0: CardBus bridge found [103c:0850]
[ 12.484490] yenta_cardbus 0000:00:0a.0: O2: res at 0x94/0xD4: 00/ea
[ 12.484492] yenta_cardbus 0000:00:0a.0: O2: enabling read prefetch/write burst
[ 12.497606] parport_pc 00:09: reported by Plug and Play ACPI
[ 12.497688] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 12.526563] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input6
[ 12.537330] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 12.556360] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 12.617806] yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x0038, PCI irq 11
[ 12.617813] yenta_cardbus 0000:00:0a.0: Socket status: 30000828
[ 12.624544] agpgart-ati 0000:00:00.0: Ati IGP345M chipset
[ 12.633135] agpgart-ati 0000:00:00.0: AGP aperture is 64M @ 0xd4000000
[ 12.663544] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 12.866112] ALI 5451 0000:00:06.0: enabling device (0005 -> 0007)
[ 12.866557] ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 5
[ 12.866562] PCI: setting IRQ 5 as level-triggered
[ 12.866567] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNK7] -> GSI 5 (level, low) -> IRQ 5
[ 13.144140] ppdev: user-space parallel port driver
[ 13.268051] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 13.268099] pci 0000:02:00.0: reg 10 io port: [0x00-0xff]
[ 13.268107] pci 0000:02:00.0: reg 14 32bit mmio: [0x000000-0x0001ff]
[ 13.268146] pci 0000:02:00.0: supports D1 D2
[ 13.268149] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 13.268154] pci 0000:02:00.0: PME# disabled
[ 13.311084] cfg80211: Calling CRDA to update world regulatory domain
[ 13.403659] cfg80211: World regulatory domain updated:
[ 13.403668] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.403672] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.403675] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.403678] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.403680] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.403683] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.494752] rtl8180 0000:02:00.0: enabling device (0000 -> 0003)
[ 13.494773] rtl8180 0000:02:00.0: PCI INT A -> Link[LNK5] -> GSI 11 (level, low) -> IRQ 11
[ 13.494792] rtl8180 0000:02:00.0: setting latency timer to 64
[ 13.511347] phy0: Selected rate control algorithm 'pid'
[ 13.608881] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f
[ 13.611049] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 13.611950] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 13.612816] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 13.613850] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 13.632840] phy0: hwaddr 00:30:bd:4f:43:f8, RTL8180 + Philips
[ 13.662037] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
[ 13.696885] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 15.584035] AC'97 1 does not respond - RESET
[ 15.600035] AC'97 1 access is not valid [0xffffffff], removing mixer.
[ 15.600043] ali mixer 1 creating error.
[ 15.817281] lp0: using parport0 (interrupt-driven).
[ 15.956910] Adding 1301224k swap on /dev/sda5. Priority:-1 extents:1 across:1301224k
[ 16.527428] EXT3 FS on sda1, internal journal
[ 17.842442] type=1505 audit(1248978874.820:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1984
[ 17.907853] type=1505 audit(1248978874.884:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1988
[ 17.908301] type=1505 audit(1248978874.888:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1988
[ 17.908384] type=1505 audit(1248978874.888:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1988
[ 17.908458] type=1505 audit(1248978874.888:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1988
[ 18.091147] type=1505 audit(1248978875.068:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1993
[ 18.091622] type=1505 audit(1248978875.068:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1993
[ 18.135494] type=1505 audit(1248978875.112:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1997
[ 22.162968] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.162973] Bluetooth: BNEP filters: protocol multicast
[ 22.193464] Bridge firewalling registered
[ 24.462423] pci 0000:01:05.0: power state changed by ACPI to D0
[ 24.462787] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10
[ 24.462793] pci 0000:01:05.0: PCI INT A -> Link[LNK0] -> GSI 10 (level, low) -> IRQ 10
[ 28.021052] eth0: DSPCFG accepted after 0 usec.
[ 28.021178] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.652240] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.668083] wlan0: authenticate with AP 3a:6e:d6:29:f9:ea
[ 30.669663] wlan0: authenticated
[ 30.669667] wlan0: associate with AP 3a:6e:d6:29:f9:ea
[ 30.671788] wlan0: RX AssocResp from 3a:6e:d6:29:f9:ea (capab=0x1 status=0 aid=2)
[ 30.671792] wlan0: associated
[ 30.672323] wlan0: disassociating by local choice (reason=3)
[ 35.991424] glxinfo[3182]: segfault at 0 ip 0804ad46 sp bfcc6c60 error 4 in glxinfo[8048000+5000]
[ 36.030956] glxinfo[3185]: segfault at 0 ip 0804ad46 sp bf94b0b0 error 4 in glxinfo[8048000+5000]
[ 76.848069] wlan0: authenticate with AP 3a:6e:d6:29:f9:e8
[ 76.849701] wlan0: authenticated
[ 76.849705] wlan0: associate with AP 3a:6e:d6:29:f9:e8
[ 76.852755] wlan0: RX AssocResp from 3a:6e:d6:29:f9:e8 (capab=0x11 status=0 aid=2)
[ 76.852761] wlan0: associated
[ 76.854609] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 77.307824] padlock: VIA PadLock not detected.
[ 1228.670471] type=1505 audit(1248980085.648:10): operation="profile_replace" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4548
[ 1228.913266] type=1505 audit(1248980085.892:11): operation="profile_replace" name="/sbin/dhclient-script" name2="default" pid=4552
[ 1228.913931] type=1505 audit(1248980085.892:12): operation="profile_replace" name="/sbin/dhclient3" name2="default" pid=4552
[ 1228.914050] type=1505 audit(1248980085.892:13): operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=4552
[ 1228.914155] type=1505 audit(1248980085.892:14): operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=4552
[ 1228.993283] type=1505 audit(1248980085.972:15): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=4557
[ 1229.236423] type=1505 audit(1248980086.216:16): operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4561
[ 1229.237088] type=1505 audit(1248980086.216:17): operation="profile_replace" name="/usr/sbin/cupsd" name2="default" pid=4561
[ 1229.289588] type=1505 audit(1248980086.268:18): operation="profile_replace" name="/usr/sbin/tcpdump" name2="default" pid=4565

serced · Le 30/07/2009, à 20:57

il y en as assez
????

compte supprimé · Le 30/07/2009, à 21:12

Même trop, je m'y retrouve pas: on va essayer en prenant que les trucs en usb:

 dmesg | grep usb

serced · Le 31/07/2009, à 11:16

[ 1.552951] usbcore: registered new interface driver usbfs
[ 1.552990] usbcore: registered new interface driver hub
[ 1.553046] usbcore: registered new device driver usb
[ 3.536230] usb usb1: configuration #1 chosen from 1 choice
[ 3.537425] usb usb2: configuration #1 chosen from 1 choice
[ 3.538352] usb usb3: configuration #1 chosen from 1 choice
[ 3.848109] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 3.981057] usb 1-3: configuration #1 chosen from 1 choice
[ 4.360086] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 4.534202] usb 3-2: configuration #1 chosen from 1 choice
[ 5.605220] usbcore: registered new interface driver hiddev
[ 5.619542] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:0b.1/usb3/3-2/3-2:1.0/input/input5
[ 5.623223] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:0b.1-2/input0
[ 5.623263] usbcore: registered new interface driver usbhid
[ 5.623270] usbhid: v2.6:USB HID core driver

compte supprimé · Le 31/07/2009, à 11:25

Euh elle est bien branchée ta clé?
Renvoie ce que te donne la commande:

lsusb

Et change de port usb pour ta clé (si possible)

serced · Le 31/07/2009, à 11:42

lsusb
Bus 001 Device 004: ID 1164:2edc YUAN High-Tech Development Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

il y a que ma cle de branchée

compte supprimé · Le 31/07/2009, à 12:12

Ok ça doit être YUAN machin truc.
Bon dans la doc il est dit ça:

Installation sous Intrepid, Hardy et Jaunty
Cette méthode a été testée sous Intrepid 8.10, Hardy 8.04 et Jaunty 9.04 (Pour Jaunty, voir la nouvelle méthode, plus rapide). Elle se base en partie sur la méthode précédente qui aujourd'hui ne fonctionne plus sous Hardy.
Bien qu'accessible, cette méthode est loin d'être aussi évidente que la méthode Gutsy/Feisty. Elle comporte plus d'étapes différentes et nécessite donc plus de rigueur. Il ne faut pas hésiter à consulter le forum en rapport, en particulier les pages 19 et 20.
D'abord, récupérer les sources de V4l (sujet officiel)
sudo apt-get install mercurial linux-headers-$(uname -r) build-essential
hg clone http://linuxtv.org/hg/v4l-dvb
cd v4l-dvb
hg pull -u http://linuxtv.org/hg/v4l-dvb
hg update
Ensuite, dans le même répertoire, récupérer le script d'installation de jojo (merci jojo)
wget http://www.jojodu0010.123.fr/installs810
gedit installs810
Editer le script et supprimer (ou commenter) toutes les lignes contenant un "rm", puis l'exécuter:
sh installs810
Ensuite:
cp ~/v4l-dvb/v4l-dvb-3a880d2669a6/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c ~/v4l-dvb/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
gedit ~/v4l-dvb/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
Rajouter les deux lignes suivantes à la fin, juste avant le #endif.
#define USB_PID_YUANRD_STK7700D 0x2edc
#define USB_VID_YUANRD 0x1164
On doit obtenir un truc du genre:
..
#define USB_PID_DW2102 0x2102
#define USB_PID_XTENSIONS_XD_380 0x0381
#define USB_PID_TELESTAR_STARSTICK_2 0x8000
#define USB_PID_MSI_DIGI_VOX_MINI_III 0x8807
#define USB_PID_YUANRD_STK7700D 0x2edc
#define USB_VID_YUANRD 0x1164
#endif
Sauvegarder et quitter. Il ne reste plus qu'à compiler:
$ cd ~/v4l-dvb
$ sudo make unload
$ sudo make rminstall
$ sudo make distclean
$ make
$ sudo make install
Enfin, rebooter. Normalement, l'icone "télévision" de Kaffeine devrait être active et la TV fonctionnelle.

As tu suivi le tuto? Si oui, ça a foiré ou? Dans tout les cas, utilise plutôt me-tv (avec la version de developpement, un ppa est dispo: au moins celle la elle a un truc pour évaluer le signal) que kaffeine.

serced · Le 31/07/2009, à 16:13

oui j'ai même fais tout les tutos

compte supprimé · Le 31/07/2009, à 17:10

Ça n'a pas coincé quelque part?
As tu installé me-tv? Si oui, il trouve bien un périphérique DVB?

Edit: je viens de voir qu'il y a une méthode simplifiée:

sudo apt-get install mercurial linux-headers-$(uname -r) build-essential

hg clone http://linuxtv.org/hg/v4l-dvb

cd ~/v4l-dvb

sudo make unload

sudo make rminstall

sudo make distclean

make

sudo make install

Il faut taper ligne par ligne, et pas tout d'un bloc.

Dernière modification par monsieurweller (Le 31/07/2009, à 17:14)

serced · Le 31/07/2009, à 17:13

j'ai fais tout les tutos il y en a 1 qui bloque car il me manque une ligne pour le terminal
et pour me tv je l'ai instale mais rien

$ cd ~/v4l-dvb
$ sudo make unload
$ sudo make rminstall
$ sudo make distclean
$ make
$ sudo make install

pour make ca coupe et je ne sais pas si ca c'est terminé et je ne peux donc pas faire la derniere ligne

compte supprimé · Le 31/07/2009, à 17:16

serced a écrit :

pour make ca coupe et je ne sais pas si ca c'est terminé et je ne peux donc pas faire la derniere ligne

Donc le driver n'est pas installé. Bon essaye la méthode que j'ai mise juste au dessus (la simplifiée), et si ça recoupe au make, copie/colle l'erreur ici.

serced · Le 31/07/2009, à 17:19

c comme ca que j'ai fais et c touours a "make" que ca coupe
pour le mess d'erreur j'ai rien et je peux le trouver ou?

compte supprimé · Le 31/07/2009, à 17:21

serced a écrit :

c comme ca que j'ai fais et c touours a "make" que ca coupe
pour le mess d'erreur j'ai rien et je peux le trouver ou?

Les 20 dernières lignes du terminal devraient suffire .

serced · Le 31/07/2009, à 17:26

vu que l'ordi c'est coupe je n'ai plus rien!!!

compte supprimé · Le 31/07/2009, à 17:28

serced a écrit :

vu que l'ordi c'est coupe je n'ai plus rien!!!

Quoi il se coupe pendant le make??? C'est quoi ce bazar?

serced · Le 31/07/2009, à 17:33

????:(
ca signifi quoi alors

Dernière modification par serced (Le 31/07/2009, à 17:40)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 28/07/2009, à 17:33

probleme avec ma cle tnt

#2 Le 28/07/2009, à 18:58

Re : probleme avec ma cle tnt

#3 Le 28/07/2009, à 20:10

Re : probleme avec ma cle tnt

#4 Le 28/07/2009, à 20:34

Re : probleme avec ma cle tnt

#5 Le 28/07/2009, à 23:37

Re : probleme avec ma cle tnt

#6 Le 30/07/2009, à 19:02

Re : probleme avec ma cle tnt

#7 Le 30/07/2009, à 19:57

Re : probleme avec ma cle tnt

#8 Le 30/07/2009, à 19:58

Re : probleme avec ma cle tnt

#9 Le 30/07/2009, à 20:44

Re : probleme avec ma cle tnt

#10 Le 30/07/2009, à 20:56

Re : probleme avec ma cle tnt

#11 Le 30/07/2009, à 20:57

Re : probleme avec ma cle tnt

#12 Le 30/07/2009, à 21:12

Re : probleme avec ma cle tnt

#13 Le 31/07/2009, à 11:16

Re : probleme avec ma cle tnt

#14 Le 31/07/2009, à 11:25

Re : probleme avec ma cle tnt

#15 Le 31/07/2009, à 11:42

Re : probleme avec ma cle tnt

#16 Le 31/07/2009, à 12:12

Re : probleme avec ma cle tnt

#17 Le 31/07/2009, à 16:13

Re : probleme avec ma cle tnt

#18 Le 31/07/2009, à 17:10

Re : probleme avec ma cle tnt

#19 Le 31/07/2009, à 17:13

Re : probleme avec ma cle tnt

#20 Le 31/07/2009, à 17:16

Re : probleme avec ma cle tnt

#21 Le 31/07/2009, à 17:19

Re : probleme avec ma cle tnt

#22 Le 31/07/2009, à 17:21

Re : probleme avec ma cle tnt

#23 Le 31/07/2009, à 17:26

Re : probleme avec ma cle tnt

#24 Le 31/07/2009, à 17:28

Re : probleme avec ma cle tnt

#25 Le 31/07/2009, à 17:33

Re : probleme avec ma cle tnt

Pied de page des forums