#1 Le 21/12/2010, à 03:18
- ben.schmark
[RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
Bonsoir,
J'essaie d'installer sans succès une imprimante hp photosmart b210a sur ubuntu 10.10.
J'ai suivi pas à pas la doc et les divers conseils du forum en installant les derniers pilotes hplip via sourceforge ou en passant par cups.
Mon imprimante est bien détectée mais lorsque j'imprime un document j'ai inévitablement une erreur de configuration d'imprimante. Le diagnostic de dépannage d'impression m'indique que ma photosmart b210 a besoin du programme "foomatic-rip-hplip" mais que celui ci n'est pas installé. Dans ma file d'attente de document j'ai un avertissement comme quoi un filtre d'impression est manquant sur mon imprimante.
J'ai tenté de l'installer avec Synaptic mais ce paquet est introuvable.
Voici le journal des erreurs :
D [21/Dec/2010:02:10:06 +0100] cupsdSetBusyState: Dirty files
D [21/Dec/2010:02:10:06 +0100] cupsdReadClient: 12 POST / HTTP/1.1
D [21/Dec/2010:02:10:06 +0100] cupsdSetBusyState: Active clients and dirty files
D [21/Dec/2010:02:10:06 +0100] cupsdAuthorize: No authentication data provided.
D [21/Dec/2010:02:10:06 +0100] cupsdReadClient: 12 1.1 Get-Jobs 1
D [21/Dec/2010:02:10:06 +0100] Get-Jobs ipp://localhost/printers/
D [21/Dec/2010:02:10:06 +0100] [Job 63] Loading attributes...
D [21/Dec/2010:02:10:06 +0100] [Job 64] Loading attributes...
D [21/Dec/2010:02:10:06 +0100] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/) from localhost
D [21/Dec/2010:02:10:06 +0100] cupsdSetBusyState: Dirty files
D [21/Dec/2010:02:10:06 +0100] cupsdReadClient: 12 POST / HTTP/1.1
D [21/Dec/2010:02:10:06 +0100] cupsdSetBusyState: Active clients and dirty files
D [21/Dec/2010:02:10:06 +0100] cupsdAuthorize: No authentication data provided.
D [21/Dec/2010:02:10:06 +0100] cupsdReadClient: 12 1.1 Get-Jobs 1
D [21/Dec/2010:02:10:06 +0100] Get-Jobs ipp://localhost/printers/
D [21/Dec/2010:02:10:06 +0100] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/) from localhost
D [21/Dec/2010:02:10:06 +0100] cupsdSetBusyState: Dirty files
D [21/Dec/2010:02:10:06 +0100] cupsdReadClient: 12 POST / HTTP/1.1
D [21/Dec/2010:02:10:06 +0100] cupsdSetBusyState: Active clients and dirty files
D [21/Dec/2010:02:10:06 +0100] cupsdAuthorize: No authentication data provided.
D [21/Dec/2010:02:10:06 +0100] cupsdReadClient: 12 1.1 Create-Printer-Subscription 1
D [21/Dec/2010:02:10:06 +0100] Create-Printer-Subscription /
D [21/Dec/2010:02:10:06 +0100] cupsdCreateSubscription(con=0x2237e220(12), uri="/")
D [21/Dec/2010:02:10:06 +0100] pullmethod="ippget"
D [21/Dec/2010:02:10:06 +0100] notify-lease-duration=86400
D [21/Dec/2010:02:10:06 +0100] notify-time-interval=0
D [21/Dec/2010:02:10:06 +0100] cupsdAddSubscription(mask=17800, dest=(nil)(), job=(nil)(0), uri="(null)")
D [21/Dec/2010:02:10:06 +0100] Added subscription 73 for server
D [21/Dec/2010:02:10:06 +0100] cupsdMarkDirty(-----S)
D [21/Dec/2010:02:10:06 +0100] Returning IPP successful-ok for Create-Printer-Subscription (/) from localhost
D [21/Dec/2010:02:10:06 +0100] cupsdSetBusyState: Dirty files
D [21/Dec/2010:02:10:08 +0100] cupsdReadClient: 12 POST / HTTP/1.1
D [21/Dec/2010:02:10:08 +0100] cupsdSetBusyState: Active clients and dirty files
D [21/Dec/2010:02:10:08 +0100] cupsdAuthorize: No authentication data provided.
D [21/Dec/2010:02:10:08 +0100] cupsdReadClient: 12 1.1 Get-Notifications 1
D [21/Dec/2010:02:10:08 +0100] Get-Notifications /
D [21/Dec/2010:02:10:08 +0100] cupsdIsAuthorized: requesting-user-name="ben"
D [21/Dec/2010:02:10:08 +0100] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [21/Dec/2010:02:10:08 +0100] cupsdSetBusyState: Dirty files
D [21/Dec/2010:02:10:10 +0100] cupsdAcceptClient: 13 from localhost (Domain)
D [21/Dec/2010:02:10:10 +0100] cupsdReadClient: 13 POST /printers/HP-Photosmart-Plus-b210 HTTP/1.1
D [21/Dec/2010:02:10:10 +0100] cupsdSetBusyState: Active clients and dirty files
D [21/Dec/2010:02:10:10 +0100] cupsdAuthorize: No authentication data provided.
D [21/Dec/2010:02:10:10 +0100] cupsdReadClient: 13 1.1 Print-Job 1
D [21/Dec/2010:02:10:10 +0100] Print-Job ipp://localhost/printers/HP-Photosmart-Plus-b210
D [21/Dec/2010:02:10:10 +0100] [Job ???] Auto-typing file...
I [21/Dec/2010:02:10:10 +0100] [Job ???] Request file type is application/vnd.cups-banner.
D [21/Dec/2010:02:10:10 +0100] cupsdMarkDirty(----J-)
D [21/Dec/2010:02:10:10 +0100] add_job: requesting-user-name="ben"
D [21/Dec/2010:02:10:10 +0100] Adding default job-sheets values "none,none"...
I [21/Dec/2010:02:10:10 +0100] [Job 65] Adding start banner page "none".
D [21/Dec/2010:02:10:10 +0100] cupsdMarkDirty(-----S)
D [21/Dec/2010:02:10:10 +0100] cupsdMarkDirty(----J-)
I [21/Dec/2010:02:10:10 +0100] [Job 65] Adding end banner page "none".
I [21/Dec/2010:02:10:10 +0100] [Job 65] File of type application/vnd.cups-banner queued by "ben".
D [21/Dec/2010:02:10:10 +0100] [Job 65] hold_until=0
I [21/Dec/2010:02:10:10 +0100] [Job 65] Queued on "HP-Photosmart-Plus-b210" by "ben".
D [21/Dec/2010:02:10:10 +0100] cupsdMarkDirty(----J-)
D [21/Dec/2010:02:10:10 +0100] cupsdSetBusyState: Active clients, printing jobs, and dirty files
D [21/Dec/2010:02:10:10 +0100] cupsdMarkDirty(-----S)
D [21/Dec/2010:02:10:10 +0100] [Job 65] job-sheets=none,none
D [21/Dec/2010:02:10:10 +0100] [Job 65] argv[0]="HP-Photosmart-Plus-b210"
D [21/Dec/2010:02:10:10 +0100] [Job 65] argv[1]="65"
D [21/Dec/2010:02:10:10 +0100] [Job 65] argv[2]="ben"
D [21/Dec/2010:02:10:10 +0100] [Job 65] argv[3]="Test Page"
D [21/Dec/2010:02:10:10 +0100] [Job 65] argv[4]="1"
D [21/Dec/2010:02:10:10 +0100] [Job 65] argv[5]="job-uuid=urn:uuid:52348182-a228-31bd-40c9-fa4bb725a3c5 job-originating-host-name=localhost"
D [21/Dec/2010:02:10:10 +0100] [Job 65] argv[6]="/var/spool/cups/d00065-001"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[8]="HOME=/var/spool/cups/tmp"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[10]="SERVER_ADMIN=root@ben-laptop"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[11]="SOFTWARE=CUPS/1.4.4"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[13]="USER=root"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[16]="IPP_PORT=631"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[17]="CHARSET=utf-8"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[18]="LANG=fr_FR.UTF-8"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[19]="PPD=/etc/cups/ppd/HP-Photosmart-Plus-b210.ppd"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[20]="RIP_MAX_CACHE=auto"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[21]="CONTENT_TYPE=application/vnd.cups-banner"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[22]="DEVICE_URI=socket://192.168.0.16:9100"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[23]="PRINTER_INFO=HP Photosmart Plus b210"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[24]="PRINTER_LOCATION=192.168.0.16"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[25]="PRINTER=HP-Photosmart-Plus-b210"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[26]="CUPS_FILETYPE=document"
D [21/Dec/2010:02:10:10 +0100] [Job 65] envp[27]="FINAL_CONTENT_TYPE=printer/HP-Photosmart-Plus-b210"
I [21/Dec/2010:02:10:10 +0100] [Job 65] Started filter /usr/lib/cups/filter/bannertops (PID 3592)
I [21/Dec/2010:02:10:10 +0100] [Job 65] Started filter /usr/lib/cups/filter/pstopdf (PID 3593)
I [21/Dec/2010:02:10:10 +0100] [Job 65] Started filter /usr/lib/cups/filter/pdftopdf (PID 3594)
E [21/Dec/2010:02:10:10 +0100] Unable to execute /usr/lib/cups/filter/foomatic-rip-hplip: No such file or directory
E [21/Dec/2010:02:10:10 +0100] [Job 65] Unable to start filter "foomatic-rip-hplip" - Success.
D [21/Dec/2010:02:10:10 +0100] cupsdMarkDirty(-----S)
E [21/Dec/2010:02:10:10 +0100] [Job 65] Stopping job because the scheduler could not execute a filter.
D [21/Dec/2010:02:10:10 +0100] cupsdMarkDirty(----J-)
D [21/Dec/2010:02:10:10 +0100] cupsdMarkDirty(-----S)
D [21/Dec/2010:02:10:10 +0100] Returning IPP successful-ok for Print-Job (ipp://localhost/printers/HP-Photosmart-Plus-b210) from localhost
D [21/Dec/2010:02:10:10 +0100] PID 3592 (/usr/lib/cups/filter/bannertops) was terminated normally with signal 15.
D [21/Dec/2010:02:10:10 +0100] PID 3593 (/usr/lib/cups/filter/pstopdf) was terminated normally with signal 15.
D [21/Dec/2010:02:10:10 +0100] PID 3594 (/usr/lib/cups/filter/pdftopdf) was terminated normally with signal 15.
D [21/Dec/2010:02:10:10 +0100] cupsdSetBusyState: Dirty files
D [21/Dec/2010:02:10:11 +0100] cupsdAcceptClient: 15 from localhost (Domain)
D [21/Dec/2010:02:10:11 +0100] [Job 65] Unloading...
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 15 POST / HTTP/1.1
D [21/Dec/2010:02:10:11 +0100] cupsdSetBusyState: Active clients and dirty files
D [21/Dec/2010:02:10:11 +0100] cupsdAuthorize: No authentication data provided.
D [21/Dec/2010:02:10:11 +0100] cupsdAcceptClient: 16 from localhost (Domain)
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 16 POST / HTTP/1.1
D [21/Dec/2010:02:10:11 +0100] cupsdAuthorize: No authentication data provided.
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 15 1.1 Get-Jobs 1
D [21/Dec/2010:02:10:11 +0100] Get-Jobs ipp://localhost/printers/
D [21/Dec/2010:02:10:11 +0100] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/) from localhost
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 16 1.1 Get-Notifications 1
D [21/Dec/2010:02:10:11 +0100] Get-Notifications /
D [21/Dec/2010:02:10:11 +0100] cupsdIsAuthorized: requesting-user-name="ben"
D [21/Dec/2010:02:10:11 +0100] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 15 WAITING Closing on EOF
D [21/Dec/2010:02:10:11 +0100] cupsdCloseClient: 15
D [21/Dec/2010:02:10:11 +0100] cupsdAcceptClient: 15 from localhost (Domain)
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 15 POST / HTTP/1.1
D [21/Dec/2010:02:10:11 +0100] cupsdAuthorize: No authentication data provided.
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 15 1.1 Get-Notifications 1
D [21/Dec/2010:02:10:11 +0100] Get-Notifications /
D [21/Dec/2010:02:10:11 +0100] cupsdIsAuthorized: requesting-user-name="ben"
D [21/Dec/2010:02:10:11 +0100] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 16 WAITING Closing on EOF
D [21/Dec/2010:02:10:11 +0100] cupsdCloseClient: 16
D [21/Dec/2010:02:10:11 +0100] cupsdSetBusyState: Dirty files
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 15 POST / HTTP/1.1
D [21/Dec/2010:02:10:11 +0100] cupsdSetBusyState: Active clients and dirty files
D [21/Dec/2010:02:10:11 +0100] cupsdAuthorize: No authentication data provided.
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 15 1.1 Get-Job-Attributes 1
D [21/Dec/2010:02:10:11 +0100] Get-Job-Attributes ipp://localhost/jobs/65
D [21/Dec/2010:02:10:11 +0100] [Job 65] Loading attributes...
D [21/Dec/2010:02:10:11 +0100] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/65) from localhost
D [21/Dec/2010:02:10:11 +0100] cupsdSetBusyState: Dirty files
D [21/Dec/2010:02:10:11 +0100] cupsdAcceptClient: 16 from localhost (Domain)
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 16 POST / HTTP/1.1
D [21/Dec/2010:02:10:11 +0100] cupsdSetBusyState: Active clients and dirty files
D [21/Dec/2010:02:10:11 +0100] cupsdAuthorize: No authentication data provided.
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 16 1.1 Get-Printer-Attributes 1
D [21/Dec/2010:02:10:11 +0100] Get-Printer-Attributes ipp://ben-laptop:0/printers/HP-Photosmart-Plus-b210
D [21/Dec/2010:02:10:11 +0100] Returning IPP successful-ok for Get-Printer-Attributes (ipp://ben-laptop:0/printers/HP-Photosmart-Plus-b210) from localhost
D [21/Dec/2010:02:10:11 +0100] cupsdSetBusyState: Dirty files
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 16 POST / HTTP/1.1
D [21/Dec/2010:02:10:11 +0100] cupsdSetBusyState: Active clients and dirty files
D [21/Dec/2010:02:10:11 +0100] cupsdAuthorize: No authentication data provided.
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 16 1.1 Get-Job-Attributes 1
D [21/Dec/2010:02:10:11 +0100] Get-Job-Attributes ipp://localhost/jobs/65
D [21/Dec/2010:02:10:11 +0100] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/65) from localhost
D [21/Dec/2010:02:10:11 +0100] cupsdSetBusyState: Dirty files
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 12 POST / HTTP/1.1
D [21/Dec/2010:02:10:11 +0100] cupsdSetBusyState: Active clients and dirty files
D [21/Dec/2010:02:10:11 +0100] cupsdAuthorize: No authentication data provided.
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 12 1.1 Get-Notifications 1
D [21/Dec/2010:02:10:11 +0100] Get-Notifications /
D [21/Dec/2010:02:10:11 +0100] cupsdIsAuthorized: requesting-user-name="ben"
D [21/Dec/2010:02:10:11 +0100] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [21/Dec/2010:02:10:11 +0100] cupsdSetBusyState: Dirty files
D [21/Dec/2010:02:10:11 +0100] cupsdAcceptClient: 17 from localhost (Domain)
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 17 POST / HTTP/1.1
D [21/Dec/2010:02:10:11 +0100] cupsdSetBusyState: Active clients and dirty files
D [21/Dec/2010:02:10:11 +0100] cupsdAuthorize: No authentication data provided.
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 17 1.1 Get-Printer-Attributes 1
D [21/Dec/2010:02:10:11 +0100] Get-Printer-Attributes ipp://ben-laptop:0/printers/HP-Photosmart-Plus-b210
D [21/Dec/2010:02:10:11 +0100] Returning IPP successful-ok for Get-Printer-Attributes (ipp://ben-laptop:0/printers/HP-Photosmart-Plus-b210) from localhost
D [21/Dec/2010:02:10:11 +0100] cupsdSetBusyState: Dirty files
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 17 POST / HTTP/1.1
D [21/Dec/2010:02:10:11 +0100] cupsdSetBusyState: Active clients and dirty files
D [21/Dec/2010:02:10:11 +0100] cupsdAuthorize: No authentication data provided.
D [21/Dec/2010:02:10:11 +0100] cupsdReadClient: 17 1.1 Get-Job-Attributes 1
D [21/Dec/2010:02:10:11 +0100] Get-Job-Attributes ipp://localhost/jobs/65
D [21/Dec/2010:02:10:11 +0100] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/65) from localhost
D [21/Dec/2010:02:10:11 +0100] cupsdSetBusyState: Dirty files
D [21/Dec/2010:02:10:21 +0100] cupsdReadClient: 12 POST / HTTP/1.1
D [21/Dec/2010:02:10:21 +0100] cupsdSetBusyState: Active clients and dirty files
D [21/Dec/2010:02:10:21 +0100] cupsdAuthorize: No authentication data provided.
D [21/Dec/2010:02:10:21 +0100] cupsdReadClient: 12 1.1 Get-Job-Attributes 1
D [21/Dec/2010:02:10:21 +0100] Get-Job-Attributes ipp://localhost/jobs/65
D [21/Dec/2010:02:10:21 +0100] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/65) from localhost
D [21/Dec/2010:02:10:21 +0100] cupsdSetBusyState: Dirty files
D [21/Dec/2010:02:10:21 +0100] cupsdReadClient: 12 POST / HTTP/1.1
D [21/Dec/2010:02:10:21 +0100] cupsdSetBusyState: Active clients and dirty files
D [21/Dec/2010:02:10:21 +0100] cupsdAuthorize: No authentication data provided.
D [21/Dec/2010:02:10:21 +0100] cupsdReadClient: 12 1.1 Cancel-Subscription 1
D [21/Dec/2010:02:10:21 +0100] Cancel-Subscription /
D [21/Dec/2010:02:10:21 +0100] cupsdIsAuthorized: requesting-user-name="ben"
D [21/Dec/2010:02:10:21 +0100] cupsdMarkDirty(-----S)
D [21/Dec/2010:02:10:21 +0100] Returning IPP successful-ok for Cancel-Subscription (/) from localhost
D [21/Dec/2010:02:10:21 +0100] cupsdSetBusyState: Dirty files
D [21/Dec/2010:02:10:21 +0100] cupsdReadClient: 12 PUT /admin/conf/cupsd.conf HTTP/1.1
D [21/Dec/2010:02:10:21 +0100] cupsdSetBusyState: Active clients and dirty files
D [21/Dec/2010:02:10:21 +0100] cupsdAuthorize: No authentication data provided.
D [21/Dec/2010:02:10:21 +0100] cupsdIsAuthorized: username=""
D [21/Dec/2010:02:10:21 +0100] cupsdSendHeader: 12 WWW-Authenticate: Basic realm="CUPS", trc="y"
D [21/Dec/2010:02:10:21 +0100] cupsdCloseClient: 12
D [21/Dec/2010:02:10:21 +0100] cupsdSetBusyState: Dirty files
D [21/Dec/2010:02:10:21 +0100] cupsdAcceptClient: 12 from localhost (Domain)
D [21/Dec/2010:02:10:21 +0100] cupsdReadClient: 12 PUT /admin/conf/cupsd.conf HTTP/1.1
D [21/Dec/2010:02:10:21 +0100] cupsdSetBusyState: Active clients and dirty files
D [21/Dec/2010:02:10:21 +0100] cupsdAuthorize: Authorized as ben using PeerCred
D [21/Dec/2010:02:10:21 +0100] cupsdIsAuthorized: username="ben"
I [21/Dec/2010:02:10:21 +0100] Installing config file "/etc/cups/cupsd.conf"...
D [21/Dec/2010:02:10:21 +0100] cupsdSetBusyState: Dirty files
D [21/Dec/2010:02:10:21 +0100] cupsdCloseClient: 13
D [21/Dec/2010:02:10:21 +0100] cupsdCloseClient: 15
D [21/Dec/2010:02:10:21 +0100] cupsdCloseClient: 16
D [21/Dec/2010:02:10:21 +0100] cupsdCloseClient: 17
D [21/Dec/2010:02:10:21 +0100] cupsdCloseClient: 12
D [21/Dec/2010:02:10:21 +0100] cupsdDeregisterPrinter(p=0x22369090(HP-Photosmart-Plus-b210), removeit=1)
I [21/Dec/2010:02:10:21 +0100] Saving printers.conf...
I [21/Dec/2010:02:10:21 +0100] Generating printcap /var/run/cups/printcap...
I [21/Dec/2010:02:10:21 +0100] Saving job cache file "/var/cache/cups/job.cache"...
I [21/Dec/2010:02:10:21 +0100] Saving subscriptions.conf...
D [21/Dec/2010:02:10:21 +0100] cupsdSetBusyState: Not busy
E [21/Dec/2010:02:10:21 +0100] Filter "/usr/lib/cups/filter/foomatic-rip-hplip" for printer "HP-Photosmart-Plus-b210" not available: No such file or directory
E [21/Dec/2010:02:10:21 +0100] Filter "/usr/lib/cups/filter/foomatic-rip-hplip" for printer "HP-Photosmart-Plus-b210" not available: No such file or directory
Je galère trop...Un peu d'aide serait la bienvenue !
Dernière modification par ben.schmark (Le 21/12/2010, à 22:03)
Hors ligne
#2 Le 21/12/2010, à 12:53
- gl38
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
Essaie
hpcheck -t
et regarde dans la section [configure].
si tu as
foomatic-rip-hplip-install=no
c'est assez normal que tu n'aies pas ton filtre.
Il faut sans doute recompiler hplip en disant que tu veux ce filtre en donnant la bonne option enable à configure.
Cordialement,
Guy
Hors ligne
#3 Le 21/12/2010, à 15:01
- ben.schmark
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
Merci Guy,
Effectivement dans la section "configure" j'ai bien "foomatic-rip-hplip-install=no".
Mais comment faire pour recompiler hplip en donnant l'option Enable à configure ? L'installation du pilote est automatisé ; j'ai fait un glisser-déplacer du pilote téléchargé sur sourcegorge dans un terminal en le rendant exécutable.
Faut il le recompiler avec la source et non pas avec le .run ? si oui, comment fait on ?
Hors ligne
#4 Le 21/12/2010, à 15:24
- gl38
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
Si tu télécharges le fichier hplip-3.10.9.tar.gz depuis sourceforge et que tu le décompactes depuis une fenêtre terminal avec
tar zxvf hplip-3.10.9.tar.gz
tu obtiens un dossier hplip-3.10.9
dans ce dossier il y a la commande configure qui avec l'option
--enable-foomatic-rip-hplip-install
devrait faire en sorte que le filtre soit compilé quand tu lanceras make
et installé avec
sudo make install
Par défaut les choses vont s'installer dans /usr/local si je lis bien ce qu'il y a dans configure.
J'ignore si ce hplip va se mélanger avec ce que tu as déjà,
En tout cas configure (à lancer par ./configure) et make n'engendrent aucun risque, ni aucune amélioration. C'est le make install qui craint un peu plus, mais on peut faire
make -n install
qui simule l'installation sans la faire et parfois on peut voir clairement ce qui va arriver, car ce serait bête de se retrouver avec une imprimante qui n'imprime plus !
Cordialement,
Guy
Hors ligne
#5 Le 21/12/2010, à 17:01
- ben.schmark
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
J'ai bien réussi à compiler le pilote en ajoutant l'option --enable-foomatic-rip-hplip-install
Apparemment tout s'installe correctement mais quand je lance la commande hp-check je remarque que :
foomatic-rip-hplip-install=no et par conséquent j'ai toujours ce problème de filtre sur mon imprimante.
Comment se fait-il que cette option n'ait pas été ajoutée à la compilation ?
Merci de ton aide Guy !
Hors ligne
#6 Le 21/12/2010, à 18:42
- ben.schmark
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
Bon, cette fois j'ai bien réussi à installer le filtre. Lorsque je fais hp-check j'ai bien : "foomatic-rip-hplip-install=yes".
L'imprimante est donc bien détectée, je n'ai plus d'erreur de configuration quand j'imprime. Bref, j'aurais presque pu mettre "RÉSOLU" sauf que :
ça imprime n'importe quoi, qu'il s'agisse d'une page test ou d'un document j'ai une série de chiffres incompréhensibles sur plusieurs pages...
C'est vraiment moche tout ça...:(
Hors ligne
#7 Le 21/12/2010, à 22:02
- ben.schmark
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
Enfin ça marche !
Le problème des séries de chiffres venait sans doute d'un mauvais pilote d'impression.
Pour la connexion USB de l'imprimante avec hplips je me suis servi du .ppd (cups) qui se trouvait dans la source du pilote 3.10.9 téléchargé sur sourceforge que j'ai ajouté manuellement lors de l'installation hp-setup.
Je n'arrivais pas à configurer l'imprimante en wifi avec hplips (erreur i/o) alors que l'imprimante était bien connectée en usb. J'ai donc utilisé l'interface de cups et ajouté le même .ppd cité précédemment.
Tout marche en wifi comme en usb. Bonheur.
Merci à Guy pour son aide concernant l'installation du filtre "foomatic-rip-hplip"
Hors ligne
#8 Le 14/01/2011, à 08:37
- Oliversace
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
Salut j'ai exactement le même problème, mais serait-il possible pour un très débutant de détailler un peu plus:
"Si tu télécharges le fichier hplip-3.10.9.tar.gz depuis sourceforge et que tu le décompactes depuis une fenêtre terminal avec
tar zxvf hplip-3.10.9.tar.gz
tu obtiens un dossier hplip-3.10.9" ça c'est fait!
Mais
dans ce dossier il y a la commande configure qui avec l'option
--enable-foomatic-rip-hplip-install
devrait faire en sorte que le filtre soit compilé quand tu lanceras make
et installé avec
sudo make install, ça se fait comment?
Merci d'avance...
Hors ligne
#9 Le 14/01/2011, à 09:54
- gl38
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
Il ouvrir une fenêtre-terminal (Applications > Accessoires > Terminal)
Aller dans le dossier hplip-3.10.9 avec la commande cd.
Puis taper
./configure --enable-foomatic-rip-hplip-install
puis lancer la compilation avec
make
et installer avec
sudo make install
Cordialement,
Guy
Hors ligne
#10 Le 14/01/2011, à 21:27
- Oliversace
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
Je ne suis pas arrivé plus loin que:
./configure --enable-foomatic-rip-hplip-install
ce qui donne:
root@Olivier:/home/duhen/Téléchargements/hplip-3.10.9# ./configure --enable-foomatic-rip-hplip-install
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for g++... g++
checking for C++ compiler default output file name... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether accepts -g... no
checking the maximum length of command line arguments... 1572864
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking for pthread_create in -lpthread... yes
checking for pow in -lm... yes
checking for jpeg_set_defaults in -ljpeg... yes
checking for dlopen in -ldl... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking jpeglib.h usability... yes
checking jpeglib.h presence... yes
checking for jpeglib.h... yes
checking whether byte ordering is bigendian... no
checking for uint32_t... yes
checking "for platform-dependencies"... "using Default platform.h"
checking for documentation build... yes
checking for hpijs only build... no
checking for lite build... no
checking for hpcups only build... no
checking for hpijs install... no
checking for hpcups install... yes
checking for new hpcups install... no
checking for network build... yes
checking for parallel port build... no
checking for scanner build... yes
checking for gui build... yes
checking for fax build... yes
checking for dbus build... yes
checking for cups 1.1.x build... no
checking for udev acl rules... no
checking for shadow build... no
checking for foomatic ppd install... no
checking for foomatic drv install... no
checking for cups drv install... yes
checking for cups ppd install... no
checking for foomatic-rip-hplip install... yes
checking for qt4... yes
checking for qt3... no
checking for policykit... no
checking for host machine platform... x86_32
checking for CRYPTO_free in -lcrypto... yes
checking for snmp_timeout in -lnetsnmp... no
checking for snmp_timeout in -lsnmp... no
configure: error: cannot find net/ucd-snmp support (or --disable-network-build)
root@Olivier:/home/duhen/Téléchargements/hplip-3.10.9# make
make: *** Pas de cibles spécifiées et aucun makefile n'a été trouvé. Arrêt.
root@Olivier:/home/duhen/Téléchargements/hplip-3.10.9# sudo make
make: *** Pas de cibles spécifiées et aucun makefile n'a été trouvé. Arrêt.
root@Olivier:/home/duhen/Téléchargements/hplip-3.10.9# sudo make install
make: *** Pas de règle pour fabriquer la cible « install ». Arrêt.
root@Olivier:/home/duhen/Téléchargements/hplip-3.10.9# ./configure --enable-foomatic-rip-hplip-install
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for g++... g++
checking for C++ compiler default output file name... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether accepts -g... no
checking the maximum length of command line arguments... 1572864
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking for pthread_create in -lpthread... yes
checking for pow in -lm... yes
checking for jpeg_set_defaults in -ljpeg... yes
checking for dlopen in -ldl... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking jpeglib.h usability... yes
checking jpeglib.h presence... yes
checking for jpeglib.h... yes
checking whether byte ordering is bigendian... no
checking for uint32_t... yes
checking "for platform-dependencies"... "using Default platform.h"
checking for documentation build... yes
checking for hpijs only build... no
checking for lite build... no
checking for hpcups only build... no
checking for hpijs install... no
checking for hpcups install... yes
checking for new hpcups install... no
checking for network build... yes
checking for parallel port build... no
checking for scanner build... yes
checking for gui build... yes
checking for fax build... yes
checking for dbus build... yes
checking for cups 1.1.x build... no
checking for udev acl rules... no
checking for shadow build... no
checking for foomatic ppd install... no
checking for foomatic drv install... no
checking for cups drv install... yes
checking for cups ppd install... no
checking for foomatic-rip-hplip install... yes
checking for qt4... yes
checking for qt3... no
checking for policykit... no
checking for host machine platform... x86_32
checking for CRYPTO_free in -lcrypto... yes
checking for snmp_timeout in -lnetsnmp... no
checking for snmp_timeout in -lsnmp... no
configure: error: cannot find net/ucd-snmp support (or --disable-network-build)
Une idée?
Hors ligne
#11 Le 15/01/2011, à 10:03
- gl38
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
Le ./configure n'a pas réussi à fabriquer le Makefile : ce n'est pas la peine de lancer make, ni de relancer configure sans rien modifier.
Il y a une suggestion : ajouter l'option --disable-network-build à ./configure ou installer le support de ucd-snmp.
Cordialement,
Guy
Hors ligne
#12 Le 21/01/2011, à 11:00
- ddjene02
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
bonjour, alors moi j'ai le meme probleme que vous. mais je n'arrive meme pas a aller dans le dossier hplip je tape cd /home/fafa/bureau et il veu pas ?????
je comprend pas
Hors ligne
#13 Le 21/01/2011, à 11:17
- gl38
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
Essaie Bureau avec un B.
Cordialement,
Guy
Hors ligne
#14 Le 21/01/2011, à 11:20
- ddjene02
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
merci de cette rapidité mais c'est pas bureau c'est fafa qui veu pas et j'ai essayer avec des majuscule ça marche pas non plus
Hors ligne
#15 Le 21/01/2011, à 11:44
- gl38
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
Pourquoi tu tapes fafa si ce n'est pas ton nom d'utilisateur ?
Ouvre un terminal.
Tu es chez toi,
la ligne commence par ton nom suivi de @ puis du nom de l'ordinateur.
Tape:
cd Bureau
puis
ls -l
tu as la liste des fichiers et des dossiers du bureau.
Cordialement,
Guy
Hors ligne
#16 Le 21/01/2011, à 15:02
- ddjene02
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
merci bcp ça marche. excuse je suis pas doué sous linux je debute
bon par contre quand je tape ça : ./configure --enable-foomatic-rip-hplip-install
il me dit permission non accorder !!
fafa@fafa-laptop:~$ cd Bureau
fafa@fafa-laptop:~/Bureau$ dir
framabook2_ubuntu-8-04_v4_creative-commons-by-sa.pdf hplip-3.10.9.tar.gz
hplip-3.10.9
fafa@fafa-laptop:~/Bureau$ cd hplip-3.10.9
fafa@fafa-laptop:~/Bureau/hplip-3.10.9$ ./configure --enable-foomatic-rip-hplip-install
bash: ./configure: Permission non accordée
fafa@fafa-laptop:~/Bureau/hplip-3.10.9$
j'ai loupé quelque chose surement
ah j'ai trouver j'ai mi sudo avant mais bon il me dit :
fafa@fafa-laptop:~/Bureau/hplip-3.10.9$ ./configure --enable-foomatic-rip-hplip-install
bash: ./configure: Permission non accordée
fafa@fafa-laptop:~/Bureau/hplip-3.10.9$ sudo ./configure --enable-foomatic-rip-hplip-install
[sudo] password for fafa:
sudo: ./configure: command not found
fafa@fafa-laptop:~/Bureau/hplip-3.10.9$
Dernière modification par ddjene02 (Le 21/01/2011, à 15:32)
Hors ligne
#17 Le 21/01/2011, à 15:42
- gl38
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
Il ne faut pas utiliser sudo inutilement, sinon gare aux catastrophes.
Quand tu es dans le dossier Bureau et que tapes
ls -l
qu'est que cela donne ?
Et dans le dossier hplip-3.10.9 il y a quoi ?
Cordialement,
Guy
Hors ligne
#18 Le 21/01/2011, à 15:46
- ddjene02
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
pardon j'utiliserai plus sudo
alors voila j'ai ça :
fafa@fafa-laptop:~/Bureau/hplip-3.10.9$ ls -l
total 6948
-rw-r--r-- 1 fafa fafa 285985 2010-09-26 19:09 aclocal.m4
-rw-rw-r-- 1 fafa fafa 8511 2010-09-26 19:07 align.py
drwxrwxrwx 2 fafa fafa 4096 2011-01-20 16:11 base
-rw-rw-r-- 1 fafa fafa 32226 2010-09-26 19:07 check.py
-rw-rw-r-- 1 fafa fafa 6444 2010-09-26 19:07 clean.py
-rw-rw-r-- 1 fafa fafa 9168 2010-09-26 19:07 colorcal.py
-rw-r--r-- 1 fafa fafa 44892 2008-08-30 00:27 config.guess
-rw-r--r-- 1 fafa fafa 42744 2011-01-21 09:07 config.log
-rw-r--r-- 1 fafa fafa 35363 2011-01-21 09:07 config.status
-rw-r--r-- 1 fafa fafa 33387 2008-08-30 00:27 config.sub
-rw-r--r-- 1 fafa fafa 825001 2010-09-26 19:09 configure
-rw-rw-rw- 1 fafa fafa 21052 2010-09-26 19:08 configure.in
drwxrwxrwx 2 fafa fafa 4096 2010-09-26 19:11 copier
-rw-rw-r-- 1 fafa fafa 17941 2010-09-26 19:07 COPYING
-rw-rw-r-- 1 fafa fafa 18229 2010-09-26 19:07 copyright
-rw-r--r-- 1 fafa fafa 29138 2010-09-26 19:09 cups_drv.inc
-rw-r--r-- 1 fafa fafa 807 2011-01-21 09:07 cupsext.la
-rw-r--r-- 1 fafa fafa 327 2011-01-21 09:07 cupsext_la-cupsext.lo
-rw-rw-r-- 1 fafa fafa 28704 2010-09-26 19:07 dat2drv.py
drwxrwxrwx 10 fafa fafa 4096 2010-09-26 19:11 data
-rw-r--r-- 1 fafa fafa 18615 2009-06-11 11:30 depcomp
-rw-rw-r-- 1 fafa fafa 2418 2010-09-26 19:07 devicesettings.py
drwxrwxrwx 4 fafa fafa 4096 2010-09-26 19:12 doc
-rw-rw-r-- 1 fafa fafa 24861 2010-09-26 19:07 fab.py
-rw-r--r-- 1 fafa fafa 30532 2011-01-21 09:08 fat.o
drwxrwxrwx 5 fafa fafa 4096 2010-09-26 19:11 fax
-rw-rw-r-- 1 fafa fafa 2299 2010-09-26 19:07 faxsetup.py
-rw-rw-r-- 1 fafa fafa 5477 2010-09-26 19:07 firmware.py
-rw-r--r-- 1 fafa fafa 41593 2010-09-26 19:09 foomatic_drv.inc
-rw-r--r-- 1 fafa fafa 5014 2011-01-21 09:08 hp
-rw-rw-r-- 1 fafa fafa 6992 2010-09-26 19:07 hpdio.py
-rw-r--r-- 1 fafa fafa 31336 2011-01-21 09:08 hp-hp.o
-rw-r--r-- 1 fafa fafa 5807 2011-01-21 09:08 hpijs
-rw-r--r-- 1 fafa fafa 33316 2011-01-21 09:08 hpijs-hpijsfax.o
-rw-r--r-- 1 fafa fafa 51216 2011-01-21 09:08 hpijs-hpijs.o
-rw-r--r-- 1 fafa fafa 22248 2011-01-21 09:08 hpijs-hpiom.o
-rw-r--r-- 1 fafa fafa 10304 2011-01-21 09:08 hpijs-ijs.o
-rw-r--r-- 1 fafa fafa 32776 2011-01-21 09:08 hpijs-ijs_server.o
-rw-r--r-- 1 fafa fafa 65356 2011-01-21 09:08 hpijs-services.o
-rw-r--r-- 1 fafa fafa 883 2011-01-21 09:07 hplip.conf
-rw-rw-r-- 1 fafa fafa 1112 2010-09-26 19:07 hplip.conf.in
-rw-r--r-- 1 fafa fafa 341 2011-01-21 09:07 hplip.desktop
-rw-rw-r-- 1 fafa fafa 344 2010-09-26 19:07 hplip.desktop.in
-rw-rw-r-- 1 fafa fafa 43 2010-09-26 19:07 hplip-install
-rw-r----- 1 fafa fafa 10369 2011-01-21 08:18 hplip-install_Fri-21-Jan-2011_08:17:31.log
-rw-r----- 1 fafa fafa 471232 2011-01-21 09:19 hplip-install_Fri-21-Jan-2011_09:06:19.log
-rw-r----- 1 fafa fafa 35200 2011-01-20 16:14 hplip-install_Thu-20-Jan-2011_16:11:20.log
-rw-r--r-- 1 fafa fafa 17785 2011-01-21 09:08 hplipjs
-rw-r--r-- 1 fafa fafa 11768 2011-01-21 09:08 hplipjs.o
-rw-r--r-- 1 fafa fafa 16953 2011-01-21 09:07 hplip.list
-rw-rw-r-- 1 fafa fafa 20151 2010-09-26 19:07 hplip.list.in
-rw-rw-r-- 1 fafa fafa 83 2010-09-26 19:07 hplip.state
-rw-r--r-- 1 fafa fafa 301 2011-01-21 09:07 hplip-systray.desktop
-rw-rw-r-- 1 fafa fafa 304 2010-09-26 19:07 hplip-systray.desktop.in
-rw-r--r-- 1 fafa fafa 5008 2011-01-21 09:08 hp-mkuri
-rw-r--r-- 1 fafa fafa 28812 2011-01-21 09:08 hp_mkuri-hp-mkuri.o
-rw-r--r-- 1 fafa fafa 1177 2011-01-21 09:07 hpmudext.la
-rw-r--r-- 1 fafa fafa 331 2011-01-21 09:07 hpmudext_la-hpmudext.lo
-rw-r--r-- 1 fafa fafa 1952142 2011-01-21 09:08 hppgsz
-rw-r--r-- 1 fafa fafa 35888 2011-01-21 09:08 hppgsz-PrinterProperties.o
-rw-rw-r-- 1 fafa fafa 18593 2010-09-26 19:07 hpssd.py
-rw-rw-r-- 1 fafa fafa 6338 2010-09-26 19:07 info.py
-rw-rw-r-- 1 fafa fafa 345 2010-09-26 19:07 init-iptables-firewall
-rw-rw-r-- 1 fafa fafa 799 2010-09-26 19:07 __init__.py
-rw-rw-r-- 1 fafa fafa 532 2010-09-26 19:07 init-suse-firewall
drwxrwxrwx 2 fafa fafa 4096 2011-01-20 16:11 installer
-rw-rw-r-- 1 fafa fafa 7674 2010-09-26 19:07 install.py
-rw-r--r-- 1 fafa fafa 13663 2009-06-11 11:30 install-sh
drwxrwxrwx 4 fafa fafa 4096 2010-09-26 19:11 io
drwxrwxrwx 2 fafa fafa 4096 2010-09-26 19:12 ip
-rw-r--r-- 1 fafa fafa 303 2011-01-21 09:07 ipmain.lo
-rw-rw-r-- 1 fafa fafa 6887 2010-09-26 19:07 levels.py
-rw-r--r-- 1 fafa fafa 731 2011-01-21 09:08 libapdk.la
-rw-r--r-- 1 fafa fafa 333 2011-01-21 09:08 libapdk_la-apollo21xx.lo
-rw-r--r-- 1 fafa fafa 333 2011-01-21 09:08 libapdk_la-apollo2560.lo
-rw-r--r-- 1 fafa fafa 333 2011-01-21 09:08 libapdk_la-apollo2xxx.lo
-rw-r--r-- 1 fafa fafa 335 2011-01-21 09:07 libapdk_la-breaks_open.lo
-rw-r--r-- 1 fafa fafa 327 2011-01-21 09:07 libapdk_la-capture.lo
-rw-r--r-- 1 fafa fafa 347 2011-01-21 09:07 libapdk_la-colormatcher_open.lo
-rw-r--r-- 1 fafa fafa 333 2011-01-21 09:07 libapdk_la-colormatch.lo
-rw-r--r-- 1 fafa fafa 335 2011-01-21 09:07 libapdk_la-compression.lo
-rw-r--r-- 1 fafa fafa 329 2011-01-21 09:07 libapdk_la-context2.lo
-rw-r--r-- 1 fafa fafa 331 2011-01-21 09:07 libapdk_la-create_so.lo
-rw-r--r-- 1 fafa fafa 327 2011-01-21 09:07 libapdk_la-creator.lo
-rw-r--r-- 1 fafa fafa 335 2011-01-21 09:08 libapdk_la-dj3320_cmap.lo
-rw-r--r-- 1 fafa fafa 325 2011-01-21 09:08 libapdk_la-dj3320.lo
-rw-r--r-- 1 fafa fafa 323 2011-01-21 09:08 libapdk_la-dj350.lo
-rw-r--r-- 1 fafa fafa 335 2011-01-21 09:08 libapdk_la-dj3600_cmap.lo
-rw-r--r-- 1 fafa fafa 325 2011-01-21 09:08 libapdk_la-dj3600.lo
-rw-r--r-- 1 fafa fafa 335 2011-01-21 09:08 libapdk_la-dj4100_cmap.lo
-rw-r--r-- 1 fafa fafa 323 2011-01-21 09:08 libapdk_la-dj540.lo
-rw-r--r-- 1 fafa fafa 323 2011-01-21 09:08 libapdk_la-dj600.lo
-rw-r--r-- 1 fafa fafa 333 2011-01-21 09:08 libapdk_la-dj600_maps.lo
-rw-r--r-- 1 fafa fafa 323 2011-01-21 09:08 libapdk_la-dj630.lo
-rw-r--r-- 1 fafa fafa 323 2011-01-21 09:08 libapdk_la-dj660.lo
-rw-r--r-- 1 fafa fafa 333 2011-01-21 09:08 libapdk_la-dj660_maps.lo
-rw-r--r-- 1 fafa fafa 323 2011-01-21 09:08 libapdk_la-dj690.lo
-rw-r--r-- 1 fafa fafa 333 2011-01-21 09:08 libapdk_la-dj690_maps.lo
-rw-r--r-- 1 fafa fafa 323 2011-01-21 09:08 libapdk_la-dj6xx.lo
-rw-r--r-- 1 fafa fafa 323 2011-01-21 09:08 libapdk_la-dj850.lo
-rw-r--r-- 1 fafa fafa 333 2011-01-21 09:08 libapdk_la-dj850_maps.lo
-rw-r--r-- 1 fafa fafa 323 2011-01-21 09:08 libapdk_la-dj890.lo
-rw-r--r-- 1 fafa fafa 335 2011-01-21 09:08 libapdk_la-dj895_maps2.lo
-rw-r--r-- 1 fafa fafa 333 2011-01-21 09:08 libapdk_la-dj895_maps.lo
-rw-r--r-- 1 fafa fafa 323 2011-01-21 09:08 libapdk_la-dj8x5.lo
-rw-r--r-- 1 fafa fafa 323 2011-01-21 09:08 libapdk_la-dj8xx.lo
-rw-r--r-- 1 fafa fafa 335 2011-01-21 09:08 libapdk_la-dj970_maps2.lo
-rw-r--r-- 1 fafa fafa 335 2011-01-21 09:08 libapdk_la-dj970_maps3.lo
-rw-r--r-- 1 fafa fafa 333 2011-01-21 09:08 libapdk_la-dj970_maps.lo
-rw-r--r-- 1 fafa fafa 323 2011-01-21 09:07 libapdk_la-dj9xx.lo
-rw-r--r-- 1 fafa fafa 329 2011-01-21 09:07 libapdk_la-dj9xxvip.lo
-rw-r--r-- 1 fafa fafa 337 2011-01-21 09:08 libapdk_la-djgenericvip.lo
-rw-r--r-- 1 fafa fafa 331 2011-01-21 09:08 libapdk_la-filterhpa.lo
-rw-r--r-- 1 fafa fafa 327 2011-01-21 09:08 libapdk_la-globals.lo
-rw-r--r-- 1 fafa fafa 331 2011-01-21 09:08 libapdk_la-halftoner.lo
-rw-r--r-- 1 fafa fafa 341 2011-01-21 09:08 libapdk_la-halftoner_open.lo
-rw-r--r-- 1 fafa fafa 327 2011-01-21 09:08 libapdk_la-header2.lo
-rw-r--r-- 1 fafa fafa 327 2011-01-21 09:08 libapdk_la-htmtxhi.lo
-rw-r--r-- 1 fafa fafa 327 2011-01-21 09:08 libapdk_la-jccolor.lo
-rw-r--r-- 1 fafa fafa 329 2011-01-21 09:08 libapdk_la-jdatadbf.lo
-rw-r--r-- 1 fafa fafa 319 2011-01-21 09:08 libapdk_la-job.lo
-rw-r--r-- 1 fafa fafa 327 2011-01-21 09:08 libapdk_la-ljcolor.lo
-rw-r--r-- 1 fafa fafa 337 2011-01-21 09:08 libapdk_la-ljfastraster.lo
-rw-r--r-- 1 fafa fafa 333 2011-01-21 09:08 libapdk_la-ljjetready.lo
-rw-r--r-- 1 fafa fafa 327 2011-01-21 09:08 libapdk_la-ljm1005.lo
-rw-r--r-- 1 fafa fafa 325 2011-01-21 09:08 libapdk_la-ljmono.lo
-rw-r--r-- 1 fafa fafa 333 2011-01-21 09:08 libapdk_la-ljzjscolor.lo
-rw-r--r-- 1 fafa fafa 323 2011-01-21 09:08 libapdk_la-ljzjs.lo
-rw-r--r-- 1 fafa fafa 331 2011-01-21 09:08 libapdk_la-ljzjsmono.lo
-rw-r--r-- 1 fafa fafa 325 2011-01-21 09:07 libapdk_la-models.lo
-rw-r--r-- 1 fafa fafa 337 2011-01-21 09:08 libapdk_la-phobos_cmaps.lo
-rw-r--r-- 1 fafa fafa 329 2011-01-21 09:08 libapdk_la-pmselect.lo
-rw-r--r-- 1 fafa fafa 341 2011-01-21 09:08 libapdk_la-printerfactory.lo
-rw-r--r-- 1 fafa fafa 327 2011-01-21 09:08 libapdk_la-printer.lo
-rw-r--r-- 1 fafa fafa 337 2011-01-21 09:08 libapdk_la-printerproxy.lo
-rw-r--r-- 1 fafa fafa 325 2011-01-21 09:08 libapdk_la-psp100.lo
-rw-r--r-- 1 fafa fafa 337 2011-01-21 09:08 libapdk_la-quickconnect.lo
-rw-r--r-- 1 fafa fafa 329 2011-01-21 09:08 libapdk_la-registry.lo
-rw-r--r-- 1 fafa fafa 325 2011-01-21 09:08 libapdk_la-scaler.lo
-rw-r--r-- 1 fafa fafa 335 2011-01-21 09:08 libapdk_la-scaler_open.lo
-rw-r--r-- 1 fafa fafa 325 2011-01-21 09:08 libapdk_la-script.lo
-rw-r--r-- 1 fafa fafa 341 2011-01-21 09:08 libapdk_la-systemservices.lo
-rw-r--r-- 1 fafa fafa 333 2011-01-21 09:08 libapdk_la-translator.lo
-rw-r--r-- 1 fafa fafa 335 2011-01-21 09:08 libapdk_la-versioncode.lo
-rw-r--r-- 1 fafa fafa 327 2011-01-21 09:08 libapdk_la-version.lo
-rw-r--r-- 1 fafa fafa 789 2011-01-21 09:07 libhpip.la
-rw-r--r-- 1 fafa fafa 843 2011-01-21 09:07 libhpmud.la
-rw-r--r-- 1 fafa fafa 323 2011-01-21 09:07 libhpmud_la-dot4.lo
-rw-r--r-- 1 fafa fafa 325 2011-01-21 09:07 libhpmud_la-hpmud.lo
-rw-r--r-- 1 fafa fafa 319 2011-01-21 09:07 libhpmud_la-jd.lo
-rw-r--r-- 1 fafa fafa 321 2011-01-21 09:07 libhpmud_la-mlc.lo
-rw-r--r-- 1 fafa fafa 325 2011-01-21 09:07 libhpmud_la-model.lo
-rw-r--r-- 1 fafa fafa 323 2011-01-21 09:07 libhpmud_la-musb.lo
-rw-r--r-- 1 fafa fafa 321 2011-01-21 09:07 libhpmud_la-pml.lo
-rw-r--r-- 1 fafa fafa 319 2011-01-21 09:07 libhpmud_la-pp.lo
-rw-r--r-- 1 fafa fafa 1686 2011-01-21 09:07 libsane-hpaio.la
-rw-r--r-- 1 fafa fafa 339 2011-01-21 09:07 libsane_hpaio_la-bb_ledm.lo
-rw-r--r-- 1 fafa fafa 337 2011-01-21 09:07 libsane_hpaio_la-common.lo
-rw-r--r-- 1 fafa fafa 335 2011-01-21 09:07 libsane_hpaio_la-hpaio.lo
-rw-r--r-- 1 fafa fafa 333 2011-01-21 09:07 libsane_hpaio_la-http.lo
-rw-r--r-- 1 fafa fafa 329 2011-01-21 09:07 libsane_hpaio_la-io.lo
-rw-r--r-- 1 fafa fafa 333 2011-01-21 09:07 libsane_hpaio_la-ledm.lo
-rw-r--r-- 1 fafa fafa 339 2011-01-21 09:07 libsane_hpaio_la-marvell.lo
-rw-r--r-- 1 fafa fafa 337 2011-01-21 09:07 libsane_hpaio_la-mfpdtf.lo
-rw-r--r-- 1 fafa fafa 331 2011-01-21 09:07 libsane_hpaio_la-pml.lo
-rw-r--r-- 1 fafa fafa 357 2011-01-21 09:07 libsane_hpaio_la-sanei_init_debug.lo
-rw-r--r-- 1 fafa fafa 331 2011-01-21 09:07 libsane_hpaio_la-scl.lo
-rw-r--r-- 1 fafa fafa 337 2011-01-21 09:07 libsane_hpaio_la-soapht.lo
-rw-r--r-- 1 fafa fafa 333 2011-01-21 09:07 libsane_hpaio_la-soap.lo
-rw-r--r-- 1 fafa fafa 331 2011-01-21 09:07 libsane_hpaio_la-xml.lo
-rw-r--r-- 1 fafa fafa 220383 2011-01-21 09:07 libtool
-rw-rw-r-- 1 fafa fafa 2541 2010-09-26 19:07 linefeedcal.py
-rw-r--r-- 1 fafa fafa 199705 2008-08-30 00:27 ltmain.sh
-rw-rw-r-- 1 fafa fafa 11572 2010-09-26 19:07 makecopies.py
-rw-r--r-- 1 fafa fafa 500546 2011-01-21 09:07 Makefile
-rw-rw-r-- 1 fafa fafa 26071 2010-09-26 19:07 Makefile.am
-rw-r--r-- 1 fafa fafa 560459 2010-09-26 19:09 Makefile.in
-rw-rw-r-- 1 fafa fafa 5744 2010-09-26 19:07 makeuri.py
-rw-r--r-- 1 fafa fafa 11419 2009-06-11 11:30 missing
drwxrwxrwx 3 fafa fafa 4096 2010-09-26 19:12 pcard
-rw-r--r-- 1 fafa fafa 806 2011-01-21 09:08 pcardext.la
-rw-r--r-- 1 fafa fafa 321 2011-01-21 09:08 pcardext_la-fat.lo
-rw-r--r-- 1 fafa fafa 331 2011-01-21 09:08 pcardext_la-pcardext.lo
-rw-rw-r-- 1 fafa fafa 3202 2010-09-26 19:07 pkservice.py
-rw-rw-r-- 1 fafa fafa 15418 2010-09-26 19:07 plugin.py
drwxrwxrwx 2 fafa fafa 4096 2010-09-26 19:11 plugins
drwxrwxrwx 4 fafa fafa 4096 2010-09-26 19:11 ppd
-rw-rw-r-- 1 fafa fafa 2393 2010-09-26 19:07 pqdiag.py
-rw-rw-r-- 1 fafa fafa 4024 2010-09-26 19:07 print.py
-rw-rw-r-- 1 fafa fafa 2696 2010-09-26 19:07 printsettings.py
drwxrwxrwx 9 fafa fafa 4096 2010-09-26 19:12 prnt
-rw-rw-r-- 1 fafa fafa 8190 2010-09-26 19:07 probe.py
-rw-r--r-- 1 fafa fafa 4959 2011-01-21 09:08 ptest
-rw-r--r-- 1 fafa fafa 24688 2011-01-21 09:08 ptest.o
-rw-rw-r-- 1 fafa fafa 5020 2010-09-26 19:07 query.py
drwxrwxrwx 4 fafa fafa 4096 2010-09-26 19:12 scan
-rw-r--r-- 1 fafa fafa 820 2011-01-21 09:08 scanext.la
-rw-r--r-- 1 fafa fafa 327 2011-01-21 09:08 scanext_la-scanext.lo
-rw-rw-r-- 1 fafa fafa 45196 2010-09-26 19:07 scan.py
-rw-rw-r-- 1 fafa fafa 20948 2010-09-26 19:07 sendfax.py
-rw-rw-r-- 1 fafa fafa 35641 2010-09-26 19:07 setup.py
-rw-rw-r-- 1 fafa fafa 4499 2010-09-26 19:07 systray.py
-rw-rw-r-- 1 fafa fafa 5701 2010-09-26 19:07 testpage.py
-rw-rw-r-- 1 fafa fafa 3308 2010-09-26 19:07 timedate.py
-rw-rw-r-- 1 fafa fafa 8162 2010-09-26 19:07 toolbox.py
drwxrwxrwx 2 fafa fafa 4096 2010-09-26 19:12 ui
drwxrwxrwx 2 fafa fafa 4096 2010-09-26 19:12 ui4
-rw-rw-r-- 1 fafa fafa 24540 2010-09-26 19:07 unload.py
-rw-r--r-- 1 fafa fafa 29 2010-09-26 19:09 unreleased.inc
-rw-rw-r-- 1 fafa fafa 2480 2010-09-26 19:07 wificonfig.py
-rw-r--r-- 1 fafa fafa 307 2011-01-21 09:07 xbi2gray.lo
-rw-r--r-- 1 fafa fafa 305 2011-01-21 09:07 xchgbpp.lo
-rw-r--r-- 1 fafa fafa 307 2011-01-21 09:07 xcolrspc.lo
-rw-r--r-- 1 fafa fafa 309 2011-01-21 09:07 xconvolve.lo
-rw-r--r-- 1 fafa fafa 301 2011-01-21 09:07 xcrop.lo
-rw-r--r-- 1 fafa fafa 309 2011-01-21 09:07 xfakemono.lo
-rw-r--r-- 1 fafa fafa 299 2011-01-21 09:07 xfax.lo
-rw-r--r-- 1 fafa fafa 303 2011-01-21 09:07 xgamma.lo
-rw-r--r-- 1 fafa fafa 307 2011-01-21 09:07 xgray2bi.lo
-rw-r--r-- 1 fafa fafa 307 2011-01-21 09:07 xgrayout.lo
-rw-r--r-- 1 fafa fafa 305 2011-01-21 09:07 xinvert.lo
-rw-r--r-- 1 fafa fafa 307 2011-01-21 09:07 xjpg_dct.lo
-rw-r--r-- 1 fafa fafa 307 2011-01-21 09:07 xjpg_dec.lo
-rw-r--r-- 1 fafa fafa 307 2011-01-21 09:07 xjpg_enc.lo
-rw-r--r-- 1 fafa fafa 307 2011-01-21 09:07 xjpg_fix.lo
-rw-r--r-- 1 fafa fafa 307 2011-01-21 09:07 xjpg_huf.lo
-rw-r--r-- 1 fafa fafa 305 2011-01-21 09:07 xmatrix.lo
-rw-r--r-- 1 fafa fafa 299 2011-01-21 09:07 xpad.lo
-rw-r--r-- 1 fafa fafa 299 2011-01-21 09:07 xpcx.lo
-rw-r--r-- 1 fafa fafa 299 2011-01-21 09:07 xpnm.lo
-rw-r--r-- 1 fafa fafa 305 2011-01-21 09:07 xrotate.lo
-rw-r--r-- 1 fafa fafa 313 2011-01-21 09:07 xsaturation.lo
-rw-r--r-- 1 fafa fafa 303 2011-01-21 09:07 xscale.lo
-rw-r--r-- 1 fafa fafa 301 2011-01-21 09:07 xskel.lo
-rw-r--r-- 1 fafa fafa 303 2011-01-21 09:07 xtable.lo
-rw-r--r-- 1 fafa fafa 303 2011-01-21 09:07 xthumb.lo
-rw-r--r-- 1 fafa fafa 301 2011-01-21 09:07 xtiff.lo
-rw-r--r-- 1 fafa fafa 307 2011-01-21 09:07 xtonemap.lo
-rw-r--r-- 1 fafa fafa 307 2011-01-21 09:07 xyxtract.lo
fafa@fafa-laptop:~/Bureau/hplip-3.10.9$
Hors ligne
#19 Le 21/01/2011, à 15:56
- gl38
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
Il y a un problème dans ton dossier hplip-3.10.9 : les fichiers exécutables ne le sont pas.
Comment as-tu extrait l'archive ?
Tu peux essayer de taper dans le dossier hplip-3.10.9
chmod +x configure
Alors
./configure devrait démarrer... et dire ce qu'il lui manque !
Cordialement,
Guy
Hors ligne
#20 Le 21/01/2011, à 16:08
- ddjene02
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
extrait avec ça : File Roller 2.32.0
et quand je tape ça : chmod +x configure
il ne se passe rien
alors je l'ai re extrait et la ça marche enfin l'installation mais il m'imprime que des truc bizarre je vais relire plus haut il est arriver la meme chose
Dernière modification par ddjene02 (Le 21/01/2011, à 16:14)
Hors ligne
#21 Le 21/01/2011, à 16:17
- gl38
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
Je préfète tar zxfv ... qui fait ce qu'il faut au lieu de File Roller.
chmod doit mettre des x sur la ligne de configure dans la liste des fichiers de hplip-3.10.9
-rw-r--r-- 1 fafa fafa 825001 2010-09-26 19:09 configure
doit devenir
-rwxr-xr-x 1 fafa fafa 825001 2010-09-26 19:09 configure
ce qui le rend exécutable.
Cordialement,
Guy
Hors ligne
#22 Le 21/01/2011, à 16:31
- ddjene02
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
Enfin ça marche !
Le problème des séries de chiffres venait sans doute d'un mauvais pilote d'impression.
Pour la connexion USB de l'imprimante avec hplips je me suis servi du .ppd (cups) qui se trouvait dans la source du pilote 3.10.9 téléchargé sur sourceforge que j'ai ajouté manuellement lors de l'installation hp-setup.
Je n'arrivais pas à configurer l'imprimante en wifi avec hplips (erreur i/o) alors que l'imprimante était bien connectée en usb. J'ai donc utilisé l'interface de cups et ajouté le même .ppd cité précédemment.
Tout marche en wifi comme en usb. Bonheur.
Merci à Guy pour son aide concernant l'installation du filtre "foomatic-rip-hplip"
et bien moi j'en suis la et je n'arrive pas a faire ce qui est expliquer ici. merci guy pour tes explication qui m'ont été et qui me seront utile, mais si tu pouvais aussi m'eclairer pour pouvoir imprimer autre chose que des chiffres ça m'aiderai
merci d'avance
Hors ligne
#23 Le 21/01/2011, à 17:38
- gl38
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
Si tu as fait l'installation de la version nouvellement compilée de hplip, tu as probablement deux hplip, celui qui vient de synaptic et celui qui est dans /usr/local qui ne doit pas agir, je suppose.
Je ne peux pas t'aider jusqu'au bout : je n'ai pas cette imprimante et je n'ai donc pas besoin du filtre foomatic.
Ton problème étant dans un post qui a été marqué résolu, ça n'aide pas à attirer les secours.
Cordialement,
Guy
Hors ligne
#24 Le 21/01/2011, à 17:47
- ddjene02
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
oui c'est exact c'est ecri resolu dans le sujet. bon merci quand meme.
j'arrive a imprimer maintenant c'est dejas pas mal. il me reste la wifi.
bon je trouve mon imprimante en wifi mais pas moyen de se connecter dessus
enfin merci bcp guy
Hors ligne
#25 Le 27/01/2011, à 18:14
- nico1375
Re : [RESOLU] Pilote manquant : foomatic-rip-hplip sur hp photosmart b210a
Tout marche en wifi comme en usb. Bonheur.
Tout fonctionne en wifi?
Tu peux scanner en wifi?
Hors ligne