#26 Le 11/10/2005, à 21:51
- amadeus
Re : installation du driver graphique intel 82845G/GL
Alors ça fait comme avant, les modules agpgart et drm n'ont pas pu être compilés
Dumbledore returns from the dead and declares it to be hammertime, Harry proceeds to break it down, Voldemort is unable to touch this.
Hors ligne
#27 Le 11/10/2005, à 23:13
- dylhoxic
Re : installation du driver graphique intel 82845G/GL
Peux-tu poster ce que tu as fait pour l'installation et les messages d'erreur exact ?
Bonne nuit ...
Kubuntu++
Hors ligne
#28 Le 11/10/2005, à 23:20
- amadeus
Re : installation du driver graphique intel 82845G/GL
YES YES YES YES YES YES
APRES 10 MOIS DE RECHERCHES, JE TIEN LA SOLUTION :
il faut aller sur le site de dri (dri.freedesktop.org/snapshot)
et prendre les paquet suivants :
common-20050718-linux.i386
i915-20050718-linux.i386
i810-20050718-linux.i386
les extraires, (attentions, par défaut ils se mettent tous dans le même dossier, il vaut mieux les extraire un par un) et les installer avec un
sudo sh install.sh
Il ne reste plus qu'à éditer /etc/X11/xorg.conf pour changer, dans la section Device, vesa par i810.
voilà
Dumbledore returns from the dead and declares it to be hammertime, Harry proceeds to break it down, Voldemort is unable to touch this.
Hors ligne
#29 Le 12/10/2005, à 09:01
- dylhoxic
Re : installation du driver graphique intel 82845G/GL
C'est génial on approche peut être enfin d'une solution ...
Si quelqu'un peut confirmer et tester ?
Est-ce qu'un article dans le WIKI serait interessant ?
@+
Kubuntu++
Hors ligne
#30 Le 28/10/2005, à 09:54
- Baf
Re : installation du driver graphique intel 82845G/GL
Oui un Wiki c une bonne idée, car moi j'ai pas réussi à installer le driver i915, car il me sort sa pendant l'install :
Compiling...
ERROR: Kernel modules did not compile
#31 Le 03/11/2005, à 15:58
- lolow
Re : installation du driver graphique intel 82845G/GL
Error:
DIRECT RENDERING OPEN SOURCE PROJECT - DRIVER INSTALLATION SCRIPT
[ http://dri.sourceforge.net ]
==========================================================================
The script will now compile the DRM kernel modules for your machine.
Press ENTER to continue or CTRL-C to exit.
Compiling...
ERROR: Kernel modules did not compileThe DRI drivers can not be installed without the latest kernel modules.
Installation will be aborted. See the dri.log file for information on
what went wrong.
J'ai réussi à compiler le package common-linux mais pas le i810 ni le i915.
Ce que j'ai fait:
sudo -s
export LINUXSOURCE=/usr/linux-source-2.6.12
sh install.sh
Hors ligne
#32 Le 03/11/2005, à 18:53
- dylhoxic
Re : installation du driver graphique intel 82845G/GL
Petite précision, je pense qu'il faut installer les paquets suivants :
sudo -s
sudo apt-get install linux-tree kernel-headers
cd /usr/src/
tar -xjf linux-source-2.6.12.tar.bz2
et ensuite comme le précise lolow :
export LINUXSOURCE=/usr/src/linux-source-2.6.12
sh install.sh
Kubuntu++
Hors ligne
#33 Le 05/11/2005, à 12:49
- LR
Re : installation du driver graphique intel 82845G/GL
il faut aller sur le site de dri (dri.freedesktop.org/snapshot)
et prendre les paquet suivants :common-20050718-linux.i386 i915-20050718-linux.i386 i810-20050718-linux.i386
L'adresse exacte est dri.freedesktop.org/snapshots
Petite précision, je pense qu'il faut installer les paquets suivants :
sudo -s
sudo apt-get install linux-tree kernel-headers
cd /usr/src/
tar -xjf linux-source-2.6.12.tar.bz2
Et je n'ai pas trouvé "kernel-headers" mais "linux-kernel-headers".
J'ai bien fait
sudo -s
export LINUXSOURCE=/usr/src/linux-source-2.6.12
sh install.sh
mais j'ai à nouveau la même erreur avec le i810 (cf lolow).
Pourtant j'ai bien détarré le fichier (cf dyloxic) et j'ai bien le répertoire /usr/src/linux-source-2.6.12.
J'ai téléchargé les dernières sources : 20051103
Dernière modification par LR (Le 05/11/2005, à 17:37)
Hors ligne
#34 Le 08/11/2005, à 14:47
- lolow
Re : installation du driver graphique intel 82845G/GL
Pour que ca compile il faut les sources 686!
apt-get install linux-headers-686
puis pour il faut définir les deux variables:
export LINUXSOURCE=/usr/src/linux-headers-2.6.12-9-686
export LINUXDIR=$LINUXSOURCE
sh install.sh
Hors ligne
#35 Le 08/11/2005, à 15:13
- lolow
Re : installation du driver graphique intel 82845G/GL
Attention des versions du snapshots ne fonctionnent pas ou mal. J'ai utilisé la version du 7-11 qui n'utilise plus le répertoire commun dripkg mais des répertoires distincts. Elle fonctionne chez moi. Par contre il faut redémarrer la machine
Hors ligne
#36 Le 08/11/2005, à 15:17
- LR
Re : installation du driver graphique intel 82845G/GL
Cool merci pour ton aide, je vais essayer. Par contre, tu penses que je devrais prendre quelle snapshot alors ? La 7-11 ? Une autre ? Comme tu as vu j'ai essayé avec la 7-18 et effectivement, ça m'a créé deux répertoires distincts.
Hors ligne
#37 Le 08/11/2005, à 19:47
- LR
Re : installation du driver graphique intel 82845G/GL
Même erreur...
Bon, je le refais en live
- download de i810-20051107-linux.i386.tar.bz2, common-20051107-linux.i386.tar.bz2 et i915-20051107-linux.i386.tar.bz2 dans /home/lilian/tentatives_DRI
- j'ai bien installé linux-tree, linux-kernel-headers et linux-headers-686
lilian@PCSANDRA:~/tentatives_DRI# sudo -s
password:
root@PCSANDRA:~/tentatives_DRI# tar xvfj common-20051107-linux.i386.tar.bz2.tar
...
root@PCSANDRA:~/tentatives_DRI# tar xvfj i810-20051107-linux.i386.tar.bz2.tar
...
root@PCSANDRA:~/tentatives_DRI# tar xvfj i910-20051107-linux.i386.tar.bz2.tar
...
root@PCSANDRA:~/tentatives_DRI# cd common-20051107-linux.i386
root@PCSANDRA:~/tentatives_DRI/common-20051107-linux.i386# echo $LINUXSOURCE
/usr/src/linux-headers-2.6.12-9-686
root@PCSANDRA:~/tentatives_DRI/common-20051107-linux.i386# echo $LINUXDIR
/usr/src/linux-headers-2.6.12-9-686
root@PCSANDRA:~/tentatives_DRI/common-20051107-linux.i386# sh install.sh
...je passe les premières pages...
--------------------------------------------------------------------------------------------------------
DIRECT RENDERING OPEN SOURCE PROJECT - DRIVER INSTALLATION SCRIPT
[ http://dri.sourceforge.net ]
==========================================================================
Installing files:
GL & GLU libraries...done
core libraries...done
Copying extra files...done
Updating configuration:
Running ldconfig...
Checking configuration...ldd: /usr/X11R6/bin/glxinfo: Aucun fichier ou répertoire de ce type
second copy of DRI libraries found in
libraries have been backed up to dri-old.* in
done
Press ENTER to continue.
--------------------------------------------------------------------------------------------------------
ENTER
--------------------------------------------------------------------------------------------------------
DIRECT RENDERING OPEN SOURCE PROJECT - DRIVER INSTALLATION SCRIPT
[ http://dri.sourceforge.net ]
==========================================================================
The DRI installation is complete.
Restart your X server to try the new DRI drivers.
If you have problems with the DRI after upgrading your drivers
please visit the DRI website and read the Help and FAQ section.
The FAQ contains solutions to many common problems.
Report any bugs, problems and comments on the dri-devel mailing list.
Thank you for using the DRI.
root@PCSANDRA:~/tentatives_DRI/common-20051107-linux.i386# cd ../i810-20051107-linux.i386
root@PCSANDRA:~/tentatives_DRI/i810-20051107-linux.i386# sh install.sh
--------------------------------------------------------------------------------------------------
DIRECT RENDERING OPEN SOURCE PROJECT - DRIVER INSTALLATION SCRIPT
[ http://dri.sourceforge.net ]
==========================================================================
Welcome to the DRI Driver Installation Script
The package you downloaded is for the following driver:
Driver Name : i810
Description : Intel i810/i815 Driver
Architecture :
Build Date : 20051107
Kernel Module : i810
Optional Information
Driver Version :
Special Description :
Press ENTER to continue or CTRL-C to exit.
--------------------------------------------------------------------------------------------------
ENTER
--------------------------------------------------------------------------------------------------
DIRECT RENDERING OPEN SOURCE PROJECT - DRIVER INSTALLATION SCRIPT
[ http://dri.sourceforge.net ]
==========================================================================
The script will need to copy the DRI XFree86 driver modules to
your XFree86 directory.
The script will use the following XFree86 directory:
/usr/X11R6
If this is correct press ENTER, press C to change or CTRL-C to exit.
--------------------------------------------------------------------------------------------------
ENTER
--------------------------------------------------------------------------------------------------
DIRECT RENDERING OPEN SOURCE PROJECT - DRIVER INSTALLATION SCRIPT
[ http://dri.sourceforge.net ]
==========================================================================
The script also needs to copy the DRM kernel modules to your
kernel module directory.
This version of the script supports 2.4.x and 2.6.x kernels.
Kernel Version : 2.6.12-9-386
Module Directory : /lib/modules/2.6.12-9-386
If this is correct press ENTER, press C to change or CTRL-C to exit.
--------------------------------------------------------------------------------------------------
ENTER
--------------------------------------------------------------------------------------------------
DIRECT RENDERING OPEN SOURCE PROJECT - DRIVER INSTALLATION SCRIPT
[ http://dri.sourceforge.net ]
==========================================================================
The script will now compile the DRM kernel modules for your machine.
Press ENTER to continue or CTRL-C to exit.
--------------------------------------------------------------------------------------------------
ENTER
--------------------------------------------------------------------------------------------------
Compiling...
ERROR: Kernel modules did not compile
The DRI drivers can not be installed without the latest kernel modules.
Installation will be aborted. See the dri.log file for information on
what went wrong.
root@PCSANDRA:~/tentatives_DRI/i810-20051107-linux.i386#
Et c'est pareil pour le i910...
Dernière modification par LR (Le 08/11/2005, à 19:49)
Hors ligne
#38 Le 09/11/2005, à 12:23
- lolow
Re : installation du driver graphique intel 82845G/GL
Il faut aussi installer le noyau 686 car le driver ne fonctionnera qu'avec celui-ci: apt-get install linux-686
Sinon si ca marche pas c'est quoi le contenu des dri.log (pour le i810 et le i915)?
Dernière modification par lolow (Le 09/11/2005, à 12:27)
Hors ligne
#39 Le 09/11/2005, à 22:07
- LR
Re : installation du driver graphique intel 82845G/GL
lilian@PCSANDRA:~$ uname -r
2.6.12-9-686
J'installe un nouveau noyau, je boot dessus comme si de rien n'était, c'est beau quand même ubuntu
Bon, j'ai du installer gcc-3.4 mais maintenant la compil est passée
J'ai redémarré mais ça ne marche toujours pas...
Dans le /var/log/Xorg.0.log je remarque :
(EE) I810(0): [dri] I810DRIScreenInit failed because of a version mismatch.
[dri] libdri version is 5.0.0 bug version 4.2.x is needed.
[dri] Disabling DRI.
et
(**) I810(0): DPMS enabled
(WW) I810(0): Direct rendering disabled
(==) RandR enabled
J'avais vraiment bon espoir là...
Dernière modification par LR (Le 09/11/2005, à 22:15)
Hors ligne
#40 Le 10/11/2005, à 18:22
- lolow
Re : installation du driver graphique intel 82845G/GL
Là je sais pas trop: moi j'ai dans mon Xorg:
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.99.15, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
puis
(II) I810(0): [dri] visual configs initialized
si jamais ca peut t'aider..
et ma carte est
0000:00:02.0 VGA compatible controller: Intel Corp. 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
Hors ligne
#41 Le 22/11/2005, à 14:06
- LR
Re : installation du driver graphique intel 82845G/GL
J'ai eu des infos supplémentaires sur la mailing-list de dri.freedesktop.org :
libdri is usually bundled with the X server. Clearly you are loading libdri
version 5.0; your 2D driver must be updated to deal with that.
Quelqu'un sait à quoi correspond le driver 2D et comment je peux le mettre à jour ?
Merci d'avance
Lilian
Hors ligne
#42 Le 22/11/2005, à 14:51
- playmobitch
Re : installation du driver graphique intel 82845G/GL
mets à jour ton Xorg en suivant la methode du site (Upgrading to X.org 6.9 CVS)
http://dri.freedesktop.org/wiki/Download
puis install les drivers et le common
http://dri.freedesktop.org/snapshots/
chez moi ca m'a permis d'obtenir l'acceleration graphique...
Hors ligne
#43 Le 24/11/2005, à 16:54
- LR
Re : installation du driver graphique intel 82845G/GL
Merci, sur la mailing list, d'après ce que j'ai compris, j'ai deux sons de cloche : mettre à jour mon Xorg ou mettre à jour mon driver 2D.
Je suis un peu craintif pour ce qui est de toucher à mon xorg. Je vais peut-être m'y résoudre mais pour l'instant je préfererais investiguer la piste du driver 2D qui me paraît plus facile. En plus je trouve plus logique vu le message d'erreur...
Je viens de poster un message pour avoir des infos sur le driver 2D et la façon de le mettre à jour.
Hors ligne
#44 Le 24/11/2005, à 18:57
- dylhoxic
Re : installation du driver graphique intel 82845G/GL
Pour les possesseurs de i915 :
Kubuntu++
Hors ligne
#45 Le 07/12/2005, à 01:40
- Pimouss
Re : installation du driver graphique intel 82845G/GL
Alors pour ma part:
- une i915, xorg en version experimental de debian (*.99.*)...
- le module de chez intel se compile parfaitement
- il est chargé correctement,
mais toujours "direct rendering: no" indiqué par glxinfo... la seule ligne suspecte serait un:
"(WW) i810: No matching Device section bla bla"
A moins que:
"PCI: unable tu reserve meme region #3:?????????? for device 0000:00:02.0", adresse PCI qui curieusement correspond à ma carte vidéo?
Cela pourrait-il etr un début d'explication du manque d'accélération 3D?
Merci par avance
#46 Le 10/12/2005, à 19:23
- bbtgv
Re : installation du driver graphique intel 82845G/GL
Un petit Up en esperant que quequ'un à trouvé la soluce à nos problèmes de 3D
Portable: HP Compaq NX6110 avec Ubuntu Edgy.
Process: Intel Celeron 360 (1,4 GHz) - Mémoire: 256Mo DD-SDRAM -
Carte Graphique: Media Accelerator 900 (Chipset: Intel)
Koi de plus ..... Vive Linuxxxx
Hors ligne
#47 Le 16/12/2005, à 14:10
- pes
Re : installation du driver graphique intel 82845G/GL
Bonjour,
Pour tes problèmes de compilation, es-tu sûr de bien avoir make contenu dans le package build-essential?
#48 Le 29/04/2007, à 20:27
- Cowa
Re : installation du driver graphique intel 82845G/GL
Le sujet date de longtemps o_o , le problème a été résolu ? car j'aimerais bien pouvoir activé :,)
Hors ligne
#49 Le 22/06/2007, à 17:21
- Bazoo
Re : installation du driver graphique intel 82845G/GL
Qu'en est il de l'installation de ces drivers ?
Quelqu'un a t'il une solution pour leur l'installation ?
Wiki ?
Hors ligne
#50 Le 22/06/2007, à 20:55
- bleach
Re : installation du driver graphique intel 82845G/GL
salut, jsui nouvo dans le forom. Vrémon j'ai apprécié ce forom dés la premiere vue et jvé m'en profiter beaucoup. En tous cas, jé une question : quel est la puissance d'une "Chipset Intel 915GM Express pour PC portables" ?? .
Merci d'avance .
Hors ligne