#1 Le 24/10/2007, à 21:28
- clapico
[Résolu]kernel panic
Bonsoir,
lorsque je démarre mon PC, apres le grub, voici ce qui s'affiche :
[ 31.798891] RAMDISK ran outcf compressed data
[ 31.798965] invalid compressed format (err = 1)
[ 31.799427] Kernel panic-not syncing : VFS : Unable to mount root fs on unknown-block (0,0)
Dernière modification par clapico (Le 03/11/2007, à 23:56)
http://www.clapico.com/ : mon p'tit blog avec mes p'tits trucs et mes p'tites découvertes de p'tit Ubuntéro
Hors ligne
#2 Le 24/10/2007, à 21:32
- MattX
Re : [Résolu]kernel panic
Plus d'info sur ta config ? Ton partionnement disque ?
Marvin: “I am at a rough estimate thirty billion times more intelligent than you. Let me give you an example. Think of a number, any number.” — Zem: “Er, five.” — Marvin: “Wrong. You see?”
Accélération nominale d'un iPad pour fonctionnement optimal : 9.81 m/s² sur 10 mètres, puis arrêt.
GMT-5
Hors ligne
#3 Le 24/10/2007, à 21:33
- clapico
Re : [Résolu]kernel panic
un seul dd, linux uniquement, pb depuis passage a gusty
http://www.clapico.com/ : mon p'tit blog avec mes p'tits trucs et mes p'tites découvertes de p'tit Ubuntéro
Hors ligne
#4 Le 24/10/2007, à 22:02
- vond
Re : [Résolu]kernel panic
@clapico,
J'ai eu le même problème, je l'ai résolu en me connectant en mode caractères. Peux tu faire une hard copy complete car il me semble qu'il donne la manip pour se connecter en mode caractères ainsi que la commande à lancer pour réparer le prb.
Dernière modification par vond (Le 24/10/2007, à 22:03)
Core 2 duo 1,8 Ghz Packard Bell nvidia GeForce 6600LE Precise
eeepc 1005 PX Seven, Precise
Hors ligne
#5 Le 24/10/2007, à 22:02
- clapico
Re : [Résolu]kernel panic
help svp
http://www.clapico.com/ : mon p'tit blog avec mes p'tits trucs et mes p'tites découvertes de p'tit Ubuntéro
Hors ligne
#6 Le 24/10/2007, à 22:03
- clapico
Re : [Résolu]kernel panic
@clapico,
J'ai eu le même problème, je l'ai résolu en me connectant en mode caractères. Peux tu faire une hard copy complete car il me semble qu'il donne la manip pour se connecter en mode caractèes ainsi que la commande à lancer pour réparer le prb.
Etant débutant tu me parles chinois, peux-tu essayer de m'expliquer stp ?
http://www.clapico.com/ : mon p'tit blog avec mes p'tits trucs et mes p'tites découvertes de p'tit Ubuntéro
Hors ligne
#7 Le 24/10/2007, à 22:15
- vond
Re : [Résolu]kernel panic
pendant la phase de démarrage (après grub), tu vois le logo Ubuntu mais aussi des info textes qui s'affichent et défilent sur l'écran. se sont ces infos qu'il faudrait que tu envoies, ou prend le temps de les lire, il me semble qu'il y a la solution a ton prb.
les quelques lignes juste avant/après
[ 31.798891] RAMDISK ran outcf compressed data
devraient suffir
Dernière modification par vond (Le 24/10/2007, à 22:18)
Core 2 duo 1,8 Ghz Packard Bell nvidia GeForce 6600LE Precise
eeepc 1005 PX Seven, Precise
Hors ligne
#8 Le 24/10/2007, à 22:20
- clapico
Re : [Résolu]kernel panic
le pb est qu'après grub ubuntu ne charge pas, je n'ai que :
[ 31.798891] RAMDISK ran outcf compressed data
[ 31.798965] invalid compressed format (err = 1)
[ 31.799427] Kernel panic-not syncing : VFS : Unable to mount root fs on unknown-block (0,0)
pour demarrer je tape esc pendant le grub et je démarre avec kernel 2.6.22.14
http://www.clapico.com/ : mon p'tit blog avec mes p'tits trucs et mes p'tites découvertes de p'tit Ubuntéro
Hors ligne
#9 Le 24/10/2007, à 22:26
- vond
Re : [Résolu]kernel panic
tu vas peut-être en savoir plus en démarrant Gutsy en recovery mode, dans grub c'est la deuxième option.
fais le test et tiens moi au courant
Dernière modification par vond (Le 24/10/2007, à 22:26)
Core 2 duo 1,8 Ghz Packard Bell nvidia GeForce 6600LE Precise
eeepc 1005 PX Seven, Precise
Hors ligne
#10 Le 24/10/2007, à 22:29
- clapico
Re : [Résolu]kernel panic
j'essaye de suite
http://www.clapico.com/ : mon p'tit blog avec mes p'tits trucs et mes p'tites découvertes de p'tit Ubuntéro
Hors ligne
#11 Le 24/10/2007, à 22:33
- clapico
Re : [Résolu]kernel panic
la liste est longue mais un message me semble important : VFS : cannot opent root device "UUID = etc.....
Please append a correct "root=" boot option; here are the available partition
Kernel panic-not syncing : VFS : Unable to mount root fs on unknown-block (0,0)
http://www.clapico.com/ : mon p'tit blog avec mes p'tits trucs et mes p'tites découvertes de p'tit Ubuntéro
Hors ligne
#12 Le 24/10/2007, à 22:45
- vond
Re : [Résolu]kernel panic
recommence ton boot et après le message d'erreur, normalement tu peux prendre la main (avec la touche ESC ou en validant ...) il va te demander ton "username"
tu te connectes comme en mode graphique en tapant ton user + entrée puis ton mot de passe + entrée et tu vas te retrouver connecté en mode caractères (contrairement au mode graphique habituel)
si tu as la main tu pourras taper :
sudo dpkg --configure -a
+ mot de passe de root + entrée (tu le laisses bosser)
sudo reboot
+ mot de passe (ca va redémarrer)
chez moi cela a corrigé le prb.
Dernière modification par vond (Le 24/10/2007, à 22:47)
Core 2 duo 1,8 Ghz Packard Bell nvidia GeForce 6600LE Precise
eeepc 1005 PX Seven, Precise
Hors ligne
#13 Le 24/10/2007, à 22:49
- clapico
Re : [Résolu]kernel panic
je ne peux rien faire avec esc, je redemarre avec kernel 2.6.20-16 generic
http://www.clapico.com/ : mon p'tit blog avec mes p'tits trucs et mes p'tites découvertes de p'tit Ubuntéro
Hors ligne
#14 Le 24/10/2007, à 22:56
- clapico
Re : [Résolu]kernel panic
j'ai le sentiment que mon 2.6.22.14 n'est pas au bon endroit, y a t'il une manip a effectuer dans le bios ?
http://www.clapico.com/ : mon p'tit blog avec mes p'tits trucs et mes p'tites découvertes de p'tit Ubuntéro
Hors ligne
#15 Le 24/10/2007, à 22:56
- vond
Re : [Résolu]kernel panic
non, il faut démarrer le noyau 2.6.22-14 pour passer la commande dpkg
Core 2 duo 1,8 Ghz Packard Bell nvidia GeForce 6600LE Precise
eeepc 1005 PX Seven, Precise
Hors ligne
#16 Le 24/10/2007, à 22:57
- clapico
Re : [Résolu]kernel panic
il ne veut pas demarrer
http://www.clapico.com/ : mon p'tit blog avec mes p'tits trucs et mes p'tites découvertes de p'tit Ubuntéro
Hors ligne
#17 Le 24/10/2007, à 22:57
- vond
Re : [Résolu]kernel panic
non rien à voir avec le bios, il est ou ton 2.6.22-14 et qu'est-ce qui te fait dire cela ?
Dernière modification par vond (Le 24/10/2007, à 22:59)
Core 2 duo 1,8 Ghz Packard Bell nvidia GeForce 6600LE Precise
eeepc 1005 PX Seven, Precise
Hors ligne
#18 Le 24/10/2007, à 22:59
- clapico
Re : [Résolu]kernel panic
ce qui me fait dire ça, c'est ce message : Please append a correct "root=" boot option; here are the available partition
http://www.clapico.com/ : mon p'tit blog avec mes p'tits trucs et mes p'tites découvertes de p'tit Ubuntéro
Hors ligne
#19 Le 24/10/2007, à 23:06
- clapico
Re : [Résolu]kernel panic
Bon, pour ce soir j'abandonne car je me lève tôt demain, merci pour le coup de main et n'hésitez pas à laisser des post si vous avez des idées.
A demain soir
http://www.clapico.com/ : mon p'tit blog avec mes p'tits trucs et mes p'tites découvertes de p'tit Ubuntéro
Hors ligne
#20 Le 24/10/2007, à 23:06
- vond
Re : [Résolu]kernel panic
pour info, les noyaux sont dans /boot
le prb de "root= ..." vient des options passées à linux pour son démarrage, root= lui indique ou il va pouvoir trouver "/" et je ne sais pas ce qui c'est passé mais l"UID passé en paramètre n'a pas l"air bon chez toi, donc linux ne sait pas ou se trouve la partition "/" (c'est'y clair ?)
Core 2 duo 1,8 Ghz Packard Bell nvidia GeForce 6600LE Precise
eeepc 1005 PX Seven, Precise
Hors ligne
#21 Le 24/10/2007, à 23:08
- clapico
Re : [Résolu]kernel panic
disons que je comprends la logique. Maintenant, comment résoudre ce problème, c'est une autre histoire. Encore merci pour le coup de main et si tu as des idées, n'hésite pas. Pour ma part c'est fini pour ce soir
http://www.clapico.com/ : mon p'tit blog avec mes p'tits trucs et mes p'tites découvertes de p'tit Ubuntéro
Hors ligne
#22 Le 25/10/2007, à 09:20
- clapico
Re : [Résolu]kernel panic
bonjour, si quelqu'un peut m'aider.
..
http://www.clapico.com/ : mon p'tit blog avec mes p'tits trucs et mes p'tites découvertes de p'tit Ubuntéro
Hors ligne
#23 Le 25/10/2007, à 09:56
- vond
Re : [Résolu]kernel panic
Bonjour Clapico, j'espère que la nuit n'a pas été trop agitée.
peux-tu faire un test, tu démarres en 2.6.22-14 jusqu'au message d'erreur et là tu fais CTRL+ALT+F1 pour ouvrir une session en mode caractère, si ca fonctionne tu pourras te connecter et lancer dpkg.
Core 2 duo 1,8 Ghz Packard Bell nvidia GeForce 6600LE Precise
eeepc 1005 PX Seven, Precise
Hors ligne
#24 Le 25/10/2007, à 10:08
- vond
Re : [Résolu]kernel panic
pourrait-on vérifier l'UID de ton disque ?
Poste le contenu des fichiers menu.lst et fstab
tu te connectes en 2.6.20-16 (celle qui fonctionne)
dans un terminal : gksudo gedit /boot/grub/menu.lst
toujours dans un terminal : gksudo gedit /etc/fstab
copier/coller + poste
Core 2 duo 1,8 Ghz Packard Bell nvidia GeForce 6600LE Precise
eeepc 1005 PX Seven, Precise
Hors ligne
#25 Le 25/10/2007, à 12:29
- clapico
Re : [Résolu]kernel panic
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=3cc6ba07-bb0d-4b5c-ac5f-e416ee4c4d85 ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=fr_FR
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 7.10, kernel 2.6.22-14-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=3cc6ba07-bb0d-4b5c-ac5f-e416ee4c4d85 ro quiet splash locale=fr_FR
initrd /boot/initrd.img-2.6.22-14-generic
quiet
title Ubuntu 7.10, kernel 2.6.22-14-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=3cc6ba07-bb0d-4b5c-ac5f-e416ee4c4d85 ro single
initrd /boot/initrd.img-2.6.22-14-generic
title Ubuntu 7.10, kernel 2.6.20-16-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=3cc6ba07-bb0d-4b5c-ac5f-e416ee4c4d85 ro quiet splash locale=fr_FR
initrd /boot/initrd.img-2.6.20-16-generic
quiet
title Ubuntu 7.10, kernel 2.6.20-16-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=3cc6ba07-bb0d-4b5c-ac5f-e416ee4c4d85 ro single
initrd /boot/initrd.img-2.6.20-16-generic
title Ubuntu 7.10, kernel 2.6.20-15-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=3cc6ba07-bb0d-4b5c-ac5f-e416ee4c4d85 ro quiet splash locale=fr_FR
initrd /boot/initrd.img-2.6.20-15-generic
quiet
title Ubuntu 7.10, kernel 2.6.20-15-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=3cc6ba07-bb0d-4b5c-ac5f-e416ee4c4d85 ro single
initrd /boot/initrd.img-2.6.20-15-generic
title Ubuntu 7.10, memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
http://www.clapico.com/ : mon p'tit blog avec mes p'tits trucs et mes p'tites découvertes de p'tit Ubuntéro
Hors ligne