[Clos] Centralisation Probleme Webcam+EasyCam

Kanor · Le 07/12/2007, à 14:30

nicopathe je réflechis toujours à ton prb sur ton post
granguignol de même ...
elmut
j'ai trouvé cette page sur ta cam il dit bien aussi d'installer les deux paquets que tu a installé (même si je ne parla pas espagnol ) .
http://ramielinux.wordpress.com/2007/11/10/webcam-ricoh-su-gutsy/
Mais essaye de faire ça tape
sudo modprobe ricoh et tape sur tabulation pour auto compléter la commande et tape sur entré
Aprés tape dmesg et donne les dernières lignes ici
Enfin tu peux aussi vérifier si tu a une périphérie video ..

cedthebear j'ai rien trouvé sur ta cam ..

elmut · Le 07/12/2007, à 15:10

Alors merci pour ton aide.

j'ai suivi ton tuto espagnol.

impossible de faire

sudo modprobe ricoh

réponse avec tab

 $ sudo modprobe ri
rio500  rivafb

dmesg

[    0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
[    0.000000]  BIOS-e820: 000000007fed0000 - 000000007fee0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] 1150MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f8090
[    0.000000] Entering add_active_range(0, 0, 523984) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   523984
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   523984
[    0.000000] On node 0 totalpages: 523984
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2301 pages used for memmap
[    0.000000]   HighMem zone: 292307 pages, LIFO batch:31
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP signature @ 0xC00F8060 checksum 0
[    0.000000] ACPI: RSDP 000F8060, 0024 (r2 PTLTD )
[    0.000000] ACPI: XSDT 7FED7F39, 0084 (r1   Sony     VAIO 20070704 PTL         0)
[    0.000000] ACPI: FACP 7FEDFC04, 00F4 (r3   Sony     VAIO 20070704 PTL         1)
[    0.000000] ACPI: DSDT 7FED9217, 6979 (r2   Sony     VAIO 20070704 PTL  20050624)
[    0.000000] ACPI: FACS 7FEE2FC0, 0040
[    0.000000] ACPI: APIC 7FEDFCF8, 0068 (r1   Sony     VAIO 20070704 PTL        5A)
[    0.000000] ACPI: HPET 7FEDFD60, 0038 (r1   Sony     VAIO 20070704 PTL        5A)
[    0.000000] ACPI: MCFG 7FEDFD98, 003C (r1   Sony     VAIO 20070704 PTL        5A)
[    0.000000] ACPI: SLIC 7FEDFDD4, 0176 (r1   Sony     VAIO 20070704 PTL   1000000)
[    0.000000] ACPI: TMOR 7FEDFF4A, 0026 (r1   Sony     VAIO 20070704 PTL         3)
[    0.000000] ACPI: APIC 7FEDFF70, 0068 (r1   Sony     VAIO 20070704 PTL         0)
[    0.000000] ACPI: BOOT 7FEDFFD8, 0028 (r1   Sony     VAIO 20070704 PTL         1)
[    0.000000] ACPI: SSDT 7FED90FA, 011D (r1   Sony     VAIO 20070704 PTL  20050624)
[    0.000000] ACPI: SSDT 7FED85A5, 0287 (r1   Sony     VAIO 20070704 PTL  20050624)
[    0.000000] ACPI: SSDT 7FED84F1, 00B4 (r1   Sony     VAIO 20070704 PTL  20050624)
[    0.000000] ACPI: SSDT 7FED7FBD, 0534 (r1   Sony     VAIO 20070704 PTL  20050624)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:15 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[    0.000000] Built 1 zonelists.  Total pages: 519891
[    0.000000] Kernel command line: root=UUID=dbee73f1-4084-456b-aa6d-c2963fc3aca7 ro quiet splash
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1995.242 MHz processor.
[   17.711354] Console: colour VGA+ 80x25
[   17.711644] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   17.712015] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   17.840826] Memory: 2066468k/2095936k available (2015k kernel code, 28176k reserved, 916k data, 364k init, 1178432k highmem)
[   17.840838] virtual kernel memory layout:
[   17.840839]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[   17.840841]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   17.840843]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   17.840845]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   17.840846]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[   17.840848]       .data : 0xc02f7d26 - 0xc03dce84   ( 916 kB)
[   17.840849]       .text : 0xc0100000 - 0xc02f7d26   (2015 kB)
[   17.840854] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   17.840900] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   17.841031] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   17.841038] hpet0: 3 64-bit timers, 14318180 Hz
[   17.922016] Calibrating delay using timer specific routine.. 3994.93 BogoMIPS (lpj=7989872)
[   17.922044] Security Framework v1.0.0 initialized
[   17.922051] SELinux:  Disabled at boot.
[   17.922067] Mount-cache hash table entries: 512
[   17.922217] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[   17.922227] monitor/mwait feature present.
[   17.922230] using mwait in idle threads.
[   17.922235] CPU: L1 I cache: 32K, L1 D cache: 32K
[   17.922239] CPU: L2 cache: 2048K
[   17.922242] CPU: Physical Processor ID: 0
[   17.922245] CPU: Processor Core ID: 0
[   17.922247] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[   17.922260] Compat vDSO mapped to ffffe000.
[   17.922275] Checking 'hlt' instruction... OK.
[   17.938138] SMP alternatives: switching to UP code
[   17.938676] Early unpacking initramfs... done
[   18.393119] ACPI: Core revision 20070126
[   18.393181] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   18.400195] CPU0: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
[   18.400217] SMP alternatives: switching to SMP code
[   18.400293] Booting processor 1/1 eip 3000
[   18.410573] Initializing CPU#1
[   18.489692] Calibrating delay using timer specific routine.. 3990.04 BogoMIPS (lpj=7980098)
[   18.489700] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[   18.489707] monitor/mwait feature present.
[   18.489711] CPU: L1 I cache: 32K, L1 D cache: 32K
[   18.489713] CPU: L2 cache: 2048K
[   18.489716] CPU: Physical Processor ID: 0
[   18.489718] CPU: Processor Core ID: 1
[   18.489720] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[   18.490370] CPU1: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
[   18.490397] Total of 2 processors activated (7984.98 BogoMIPS).
[   18.490591] ENABLING IO-APIC IRQs
[   18.490800] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   18.637716] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   18.657726] Brought up 2 CPUs
[   18.730645] migration_cost=22
[   18.730796] Booting paravirtualized kernel on bare hardware
[   18.730880] Time: 10:32:15  Date: 11/07/107
[   18.730902] NET: Registered protocol family 16
[   18.731001] EISA bus registered
[   18.731007] ACPI: bus type pci registered
[   18.731376] PCI: PCI BIOS revision 3.00 entry at 0xfddf1, last bus=10
[   18.731379] PCI: Using configuration type 1
[   18.731382] Setting up standard PCI resources
[   18.734573] ACPI: EC: Look up EC in DSDT
[   18.742654] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[   18.746624] ACPI: System BIOS is requesting _OSI(Linux)
[   18.746627] ACPI: Please test with "acpi_osi=!Linux"
[   18.746629] Please send dmidecode to linux-acpi@vger.kernel.org
[   18.748251] ACPI: Interpreter enabled
[   18.748255] ACPI: (supports S0 S3 S4 S5)
[   18.748279] ACPI: Using IOAPIC for interrupt routing
[   18.771243] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[   18.771309] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   18.771328] PCI: Probing PCI hardware (bus 00)
[   18.774131] PCI: Transparent bridge - 0000:00:1e.0
[   18.774330] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   18.774773] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[   18.774965] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[   18.775150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[   18.775334] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[   18.775518] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[   18.775725] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[   18.829111] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[   18.829259] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[   18.829404] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[   18.829548] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[   18.829697] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[   18.829842] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[   18.829985] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[   18.830128] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[   18.830301] Linux Plug and Play Support v0.97 (c) Adam Belay
[   18.830313] pnp: PnP ACPI init
[   18.830323] ACPI: bus type pnp registered
[   18.840639] pnp: PnP ACPI: found 10 devices
[   18.840643] ACPI: ACPI bus type pnp unregistered
[   18.840648] PnPBIOS: Disabled by ACPI PNP
[   18.840704] PCI: Using ACPI for IRQ routing
[   18.840707] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   18.958833] NET: Registered protocol family 8
[   18.958836] NET: Registered protocol family 20
[   18.958895] pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[   18.958900] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[   18.958905] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[   18.958909] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[   18.958919] pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[   18.961435] Time: tsc clocksource has been installed.
[   18.961450] Switched to high resolution mode on CPU 0
[   18.961549] Switched to high resolution mode on CPU 1
[   18.989320] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
[   18.989447] PCI: Bridge: 0000:00:01.0
[   18.989450]   IO window: 2000-2fff
[   18.989455]   MEM window: cc000000-ceffffff
[   18.989460]   PREFETCH window: d0000000-dfffffff
[   18.989465] PCI: Bridge: 0000:00:1c.0
[   18.989469]   IO window: 3000-3fff
[   18.989477]   MEM window: f6000000-f7ffffff
[   18.989483]   PREFETCH window: f0000000-f1ffffff
[   18.989491] PCI: Bridge: 0000:00:1c.1
[   18.989495]   IO window: 4000-4fff
[   18.989502]   MEM window: f8000000-f9ffffff
[   18.989508]   PREFETCH window: f2000000-f3ffffff
[   18.989516] PCI: Bridge: 0000:00:1c.2
[   18.989520]   IO window: 5000-5fff
[   18.989528]   MEM window: fa000000-fbffffff
[   18.989534]   PREFETCH window: f4000000-f5ffffff
[   18.989541] PCI: Bridge: 0000:00:1c.4
[   18.989545]   IO window: 6000-6fff
[   18.989553]   MEM window: fc000000-fc0fffff
[   18.989559]   PREFETCH window: disabled.
[   18.989569] PCI: Bus 10, cardbus bridge: 0000:09:03.0
[   18.989572]   IO window: 00007000-000070ff
[   18.989579]   IO window: 00007400-000074ff
[   18.989586]   PREFETCH window: 88000000-8bffffff
[   18.989592]   MEM window: 90000000-93ffffff
[   18.989598] PCI: Bridge: 0000:00:1e.0
[   18.989603]   IO window: 7000-7fff
[   18.989610]   MEM window: fc100000-fc1fffff
[   18.989616]   PREFETCH window: 88000000-8bffffff
[   18.989637] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   18.989644] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   18.989673] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[   18.989681] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   18.989709] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 16 (level, low) -> IRQ 16
[   18.989716] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   18.989746] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[   18.989754] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   18.989781] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[   18.989789] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   18.989806] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   18.989827] ACPI: PCI Interrupt 0000:09:03.0[A] -> GSI 16 (level, low) -> IRQ 16
[   18.989845] NET: Registered protocol family 2
[   19.041370] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   19.041436] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[   19.042243] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   19.042531] TCP: Hash tables configured (established 131072 bind 65536)
[   19.042534] TCP reno registered
[   19.057516] checking if image is initramfs... it is
[   19.955538] Freeing initrd memory: 7052k freed
[   19.955653] Simple Boot Flag at 0x36 set to 0x1
[   19.956227] audit: initializing netlink socket (disabled)
[   19.956243] audit(1197023535.496:1): initialized
[   19.956354] highmem bounce pool size: 64 pages
[   19.958844] VFS: Disk quotas dquot_6.5.1
[   19.958904] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   19.959015] io scheduler noop registered
[   19.959018] io scheduler anticipatory registered
[   19.959021] io scheduler deadline registered
[   19.959039] io scheduler cfq registered (default)
[   19.959191] Boot video device is 0000:01:00.0
[   19.959299] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   19.959349] assign_interrupt_mode Found MSI capability
[   19.959353] Allocate Port Service[0000:00:01.0:pcie00]
[   19.959397] Allocate Port Service[0000:00:01.0:pcie02]
[   19.959497] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   19.959568] assign_interrupt_mode Found MSI capability
[   19.959571] Allocate Port Service[0000:00:1c.0:pcie00]
[   19.959612] Allocate Port Service[0000:00:1c.0:pcie02]
[   19.959733] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   19.959804] assign_interrupt_mode Found MSI capability
[   19.959807] Allocate Port Service[0000:00:1c.1:pcie00]
[   19.959845] Allocate Port Service[0000:00:1c.1:pcie02]
[   19.959971] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   19.960042] assign_interrupt_mode Found MSI capability
[   19.960045] Allocate Port Service[0000:00:1c.2:pcie00]
[   19.960091] Allocate Port Service[0000:00:1c.2:pcie02]
[   19.960211] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   19.960281] assign_interrupt_mode Found MSI capability
[   19.960284] Allocate Port Service[0000:00:1c.4:pcie00]
[   19.960324] Allocate Port Service[0000:00:1c.4:pcie02]
[   19.960527] isapnp: Scanning for PnP cards...
[   20.315377] isapnp: No Plug & Play device found
[   20.342172] Real Time Clock Driver v1.12ac
[   20.342443] hpet_resources: 0xfed00000 is busy
[   20.342475] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   20.343815] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   20.343968] input: Macintosh mouse button emulation as /class/input/input0
[   20.344066] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   20.347406] i8042.c: Detected active multiplexing controller, rev 1.1.
[   20.351224] serio: i8042 KBD port at 0x60,0x64 irq 1
[   20.351230] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   20.351233] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   20.351237] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   20.351240] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   20.351380] mice: PS/2 mouse device common for all mice
[   20.351764] EISA: Probing bus 0 at eisa.0
[   20.351773] Cannot allocate resource for EISA slot 1
[   20.351778] Cannot allocate resource for EISA slot 2
[   20.351781] Cannot allocate resource for EISA slot 3
[   20.351784] Cannot allocate resource for EISA slot 4
[   20.351787] Cannot allocate resource for EISA slot 5
[   20.351790] Cannot allocate resource for EISA slot 6
[   20.351792] Cannot allocate resource for EISA slot 7
[   20.351800] EISA: Detected 0 cards.
[   20.351899] TCP cubic registered
[   20.351913] NET: Registered protocol family 1
[   20.351936] Using IPI No-Shortcut mode
[   20.352139]   Magic number: 3:100:527
[   20.352439] Freeing unused kernel memory: 364k freed
[   20.360741] input: AT Translated Set 2 keyboard as /class/input/input1
[   21.621561] AppArmor: AppArmor initialized<5>audit(1197023537.496:2):  type=1505 info="AppArmor initialized" pid=1252
[   21.632081] fuse init (API version 7.8)
[   21.638018] Failure registering capabilities with primary security module.
[   21.675251] ACPI: SSDT 7FED8D75, 02A1 (r1   Sony     VAIO 20070704 PTL  20050624)
[   21.675572] ACPI: SSDT 7FED882C, 04B7 (r1   Sony     VAIO 20070704 PTL  20050624)
[   21.676398] Monitor-Mwait will be used to enter C-1 state
[   21.676402] Monitor-Mwait will be used to enter C-2 state
[   21.676406] Monitor-Mwait will be used to enter C-3 state
[   21.676412] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   21.676419] ACPI: Processor [CPU0] (supports 8 throttling states)
[   21.676909] ACPI: SSDT 7FED9016, 00E4 (r1   Sony     VAIO 20070704 PTL  20050624)
[   21.677211] ACPI: SSDT 7FED8CE3, 0092 (r1   Sony     VAIO 20070704 PTL  20050624)
[   21.678132] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[   21.678139] ACPI: Processor [CPU1] (supports 8 throttling states)
[    3.716000] Marking TSC unstable due to: possible TSC halt in C2.
[    3.716000] ACPI: Thermal Zone [TZ00] (29 C)
[    3.716000] ACPI Exception (thermal-0400): AE_NOT_FOUND, Invalid active threshold [0] [20070126]
[    3.716000] ACPI Exception (thermal-0400): AE_NOT_FOUND, Invalid active threshold [1] [20070126]
[    3.716000] ACPI: Thermal Zone [TZ01] (29 C)
[    3.720000] Time: hpet clocksource has been installed.
[    4.360000] usbcore: registered new interface driver usbfs
[    4.360000] usbcore: registered new interface driver hub
[    4.360000] usbcore: registered new device driver usb
[    4.372000] SCSI subsystem initialized
[    4.380000] libata version 2.21 loaded.
[    4.392000] ata_piix 0000:00:1f.1: version 2.11
[    4.392000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
[    4.392000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    4.392000] scsi0 : ata_piix
[    4.404000] scsi1 : ata_piix
[    4.404000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118a0 irq 14
[    4.404000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118a8 irq 15
[    4.404000] USB Universal Host Controller Interface driver v3.0
[    4.724000] ata1.00: ATAPI: MATSHITABD-CMB UJ-120, 1.00, max UDMA/33
[    4.896000] ata1.00: configured for UDMA/33
[    5.000000] Clocksource tsc unstable (delta = -382433308 ns)
[    5.064000] scsi 0:0:0:0: CD-ROM            MATSHITA BD-CMB UJ-120    1.00 PQ: 0 ANSI: 5
[    5.064000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[    5.064000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[    5.064000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    5.064000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    5.064000] ehci_hcd 0000:00:1a.7: debug port 1
[    5.064000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[    5.064000] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404800
[    5.068000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    5.068000] usb usb1: configuration #1 chosen from 1 choice
[    5.068000] hub 1-0:1.0: USB hub found
[    5.068000] hub 1-0:1.0: 4 ports detected
[    5.084000] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.084000] Uniform CD-ROM driver Revision: 3.20
[    5.084000] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    5.092000] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    5.172000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[    5.172000] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[    5.172000] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    5.172000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[    5.172000] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[    5.172000] usb usb2: configuration #1 chosen from 1 choice
[    5.172000] hub 2-0:1.0: USB hub found
[    5.172000] hub 2-0:1.0: 2 ports detected
[    5.276000] ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 20
[    5.276000] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[    5.276000] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    5.276000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[    5.276000] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001820
[    5.276000] usb usb3: configuration #1 chosen from 1 choice
[    5.276000] hub 3-0:1.0: USB hub found
[    5.276000] hub 3-0:1.0: 2 ports detected
[    5.380000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
[    5.380000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    5.380000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.380000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    5.380000] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001840
[    5.380000] usb usb4: configuration #1 chosen from 1 choice
[    5.380000] hub 4-0:1.0: USB hub found
[    5.380000] hub 4-0:1.0: 2 ports detected
[    5.416000] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    5.496000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
[    5.496000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    5.496000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.496000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    5.496000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[    5.496000] usb usb5: configuration #1 chosen from 1 choice
[    5.496000] hub 5-0:1.0: USB hub found
[    5.496000] hub 5-0:1.0: 2 ports detected
[    5.576000] usb 1-2: configuration #1 chosen from 1 choice
[    5.600000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    5.600000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    5.600000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.600000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[    5.600000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[    5.600000] usb usb6: configuration #1 chosen from 1 choice
[    5.600000] hub 6-0:1.0: USB hub found
[    5.600000] hub 6-0:1.0: 2 ports detected
[    5.704000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
[    5.704000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    5.704000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    5.704000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[    5.704000] ehci_hcd 0000:00:1d.7: debug port 1
[    5.704000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    5.704000] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc404c00
[    5.708000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    5.708000] usb usb7: configuration #1 chosen from 1 choice
[    5.708000] hub 7-0:1.0: USB hub found
[    5.708000] hub 7-0:1.0: 6 ports detected
[    5.812000] ahci 0000:00:1f.2: version 2.2
[    5.812000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 19
[    5.812000] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match
[    6.448000] usb 6-1: new full speed USB device using uhci_hcd and address 2
[    6.624000] usb 6-1: configuration #1 chosen from 1 choice
[    6.624000] hub 6-1:1.0: USB hub found
[    6.628000] hub 6-1:1.0: 3 ports detected
[    6.816000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
[    6.816000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
[    6.816000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    6.816000] scsi2 : ahci
[    6.816000] ata3: SATA max UDMA/133 cmd 0xf8828100 ctl 0x00000000 bmdma 0x00000000 irq 19
[    6.936000] usb 6-1.1: new full speed USB device using uhci_hcd and address 3
[    7.068000] usb 6-1.1: configuration #1 chosen from 1 choice
[    7.280000] usb 6-1.2: new full speed USB device using uhci_hcd and address 4
[    7.308000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    7.308000] ata3.00: ATA-8: FUJITSU MHY2200BH, 0000000B, max UDMA/100
[    7.308000] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    7.308000] ata3.00: configured for UDMA/100
[    7.308000] scsi 2:0:0:0: Direct-Access     ATA      FUJITSU MHY2200B 0000 PQ: 0 ANSI: 5
[    7.308000] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[    7.308000] ACPI: PCI Interrupt 0000:09:03.1[b] -> GSI 17 (level, low) -> IRQ 17
[    7.360000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[fc102000-fc1027ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    7.360000] sd 2:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[    7.360000] sd 2:0:0:0: [sda] Write Protect is off
[    7.360000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.360000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.360000] sd 2:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[    7.360000] sd 2:0:0:0: [sda] Write Protect is off
[    7.360000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.360000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.360000]  sda:<6>usb 6-1.2: configuration #1 chosen from 1 choice
[    7.440000]  sda1 sda2 sda3 sda4 < sda5 >
[    7.484000] sd 2:0:0:0: [sda] Attached SCSI disk
[    7.612000] usb 6-1.3: new full speed USB device using uhci_hcd and address 5
[    7.732000] usb 6-1.3: configuration #1 chosen from 1 choice
[    7.736000] usbcore: registered new interface driver hiddev
[    7.736000] input: HID 044e:3013 as /class/input/input2
[    7.736000] input: USB HID v1.11 Keyboard [HID 044e:3013] on usb-0000:00:1d.2-1.2
[    7.740000] input: HID 044e:3012 as /class/input/input3
[    7.740000] input: USB HID v1.11 Mouse [HID 044e:3012] on usb-0000:00:1d.2-1.3
[    7.740000] usbcore: registered new interface driver usbhid
[    7.740000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[    8.384000] Attempting manual resume
[    8.384000] swsusp: Resume From Partition 8:2
[    8.384000] PM: Checking swsusp image.
[    8.384000] PM: Resume from disk failed.
[    8.444000] kjournald starting.  Commit interval 5 seconds
[    8.444000] EXT3-fs: mounted filesystem with ordered data mode.
[    8.640000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0800460302756bc0]
[   15.720000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   15.744000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.964000] Linux agpgart interface v0.102 (c) Dave Jones
[   16.480000] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   16.480000] PCI: Setting latency timer of device 0000:08:00.0 to 64
[   16.480000] sky2 0000:08:00.0: v1.18 addr 0xfc000000 irq 16 Yukon-FE (0xb7) rev 1
[   16.480000] sky2 eth0: addr 00:1a:80:18:82:71
[   16.592000] input: PS/2 Mouse as /class/input/input4
[   16.596000] Bluetooth: Core ver 2.11
[   16.596000] NET: Registered protocol family 31
[   16.596000] Bluetooth: HCI device and connection manager initialized
[   16.596000] Bluetooth: HCI socket layer initialized
[   16.608000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input5
[   16.680000] Linux video capture interface: v2.00
[   16.712000] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.0
[   16.712000] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[   16.724000] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[   16.724000] PCI: Setting latency timer of device 0000:06:00.0 to 64
[   16.724000] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[   16.760000] Bluetooth: HCI USB driver ver 2.9
[   16.760000] usbcore: registered new interface driver hci_usb
[   16.892000] ACPI: PCI Interrupt 0000:09:03.2[C] -> GSI 18 (level, low) -> IRQ 18
[   16.924000] Yenta: CardBus bridge found at 0000:09:03.0 [104d:9005]
[   16.924000] Yenta: Enabling burst memory read transactions
[   16.924000] Yenta: Using CSCINT to route CSC interrupts to PCI
[   16.924000] Yenta: Routing CardBus interrupts to PCI
[   16.924000] Yenta TI: socket 0000:09:03.0, mfunc 0x01121b22, devctl 0x64
[   16.980000] nvidia: module license 'NVIDIA' taints kernel.
[   17.232000] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[   17.232000] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[   17.232000] uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26).
[   17.232000] uvcvideo: Failed to initialize the device (-5).
[   17.232000] usbcore: registered new interface driver uvcvideo
[   17.232000] USB Video Class driver (v0.1.0)
[   17.244000] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
[   17.244000] wmaster0: Selected rate control algorithm 'iwl-4965-rs'
[   17.364000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[   17.364000] Socket status: 30000006
[   17.364000] Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d
[   17.364000] pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
[   17.364000] cs: IO port probe 0x7000-0x7fff: clean.
[   17.364000] pcmcia: parent PCI bridge Memory window: 0xfc100000 - 0xfc1fffff
[   17.364000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[   17.364000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   17.364000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   17.364000] NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
[   17.528000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[   17.528000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   17.700000] cs: IO port probe 0x100-0x3af: clean.
[   17.704000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   17.704000] cs: IO port probe 0x820-0x8ff: clean.
[   17.704000] cs: IO port probe 0xc00-0xcf7: clean.
[   17.704000] cs: IO port probe 0xa00-0xaff: clean.
[   18.088000] lp: driver loaded but no devices found
[   18.172000] ACPI Sony Notebook Control Driver v0.2 successfully installed
[   18.240000] usbcam: registering driver r5u870 0.10.0
[   18.240000] usbcore: registered new interface driver r5u870
[   18.292000] Adding 2040244k swap on /dev/sda2.  Priority:-1 extents:1 across:2040244k
[   18.696000] EXT3 FS on sda3, internal journal
[   21.816000] input: Lid Switch as /class/input/input6
[   21.816000] ACPI: Lid Switch [LID0]
[   21.816000] input: Power Button (CM) as /class/input/input7
[   21.816000] ACPI: Power Button (CM) [PWRB]
[   21.904000] ACPI: Battery Slot [BAT0] (battery present)
[   21.924000] No dock devices found.
[   22.008000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   22.120000] ACPI: AC Adapter [ADP1] (off-line)
[   23.744000] NET: Registered protocol family 10
[   23.744000] lo: Disabled Privacy Extensions
[   23.944000] sky2 eth0: enabling interface
[   23.948000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.036000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   24.128000] ppdev: user-space parallel port driver
[   24.420000] audit(1197019958.273:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5366 profile="/usr/sbin/cupsd"
[   24.484000] apm: BIOS not found.
[   24.676000] sonypi: Sony Programmable I/O Controller Driver v1.26.
[   24.680000] sonypi: please try the sony-laptop module instead and report failures, see also http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
[   24.680000] sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on
[   24.680000] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
[   24.680000] sonypi: device allocated minor is 63
[   24.680000] input: Sony Vaio Jogdial as /class/input/input8
[   24.680000] input: Sony Vaio Keys as /class/input/input9
[   24.724000] sonypi command failed at /build/buildd/linux-source-2.6.22-2.6.22/drivers/char/sonypi.c : sonypi_call1 (line 652)
[   24.768000] sonypi command failed at /build/buildd/linux-source-2.6.22-2.6.22/drivers/char/sonypi.c : sonypi_call2 (line 663)
[   24.808000] sonypi command failed at /build/buildd/linux-source-2.6.22-2.6.22/drivers/char/sonypi.c : sonypi_call2 (line 665)
[   24.852000] sonypi command failed at /build/buildd/linux-source-2.6.22-2.6.22/drivers/char/sonypi.c : sonypi_call1 (line 652)
[   25.052000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   25.144000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   25.156000] NFSD: starting 90-second grace period
[   27.188000] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   27.188000] vboxdrv: Successfully done.
[   27.720000] Failure registering capabilities with primary security module.
[   27.964000] Bluetooth: L2CAP ver 2.8
[   27.964000] Bluetooth: L2CAP socket layer initialized
[   28.036000] Bluetooth: RFCOMM socket layer initialized
[   28.036000] Bluetooth: RFCOMM TTY layer initialized
[   28.036000] Bluetooth: RFCOMM ver 1.8
[   33.068000] /dev/vmmon[5890]: Module vmmon: registered with major=10 minor=165
[   33.068000] /dev/vmmon[5890]: Module vmmon: initialized
[   33.856000] /dev/vmnet: open called by PID 5919 (vmnet-bridge)
[   33.856000] /dev/vmnet: hub 0 does not exist, allocating memory.
[   33.856000] /dev/vmnet: port on hub 0 successfully opened
[   33.856000] bridge-eth0: enabling the bridge
[   33.856000] bridge-eth0: up
[   33.856000] bridge-eth0: already up
[   33.856000] bridge-eth0: attached
[   33.892000] /dev/vmnet: open called by PID 5927 (vmnet-netifup)
[   33.892000] /dev/vmnet: hub 1 does not exist, allocating memory.
[   33.892000] /dev/vmnet: port on hub 1 successfully opened
[   33.892000] /dev/vmnet: open called by PID 5935 (vmnet-netifup)
[   33.892000] /dev/vmnet: hub 8 does not exist, allocating memory.
[   33.892000] /dev/vmnet: port on hub 8 successfully opened
[   33.972000] /dev/vmnet: open called by PID 5934 (vmnet-natd)
[   33.972000] /dev/vmnet: port on hub 8 successfully opened
[   34.156000] /dev/vmnet: open called by PID 5958 (vmnet-dhcpd)
[   34.156000] /dev/vmnet: port on hub 8 successfully opened
[   34.168000] /dev/vmnet: open called by PID 5959 (vmnet-dhcpd)
[   34.172000] /dev/vmnet: port on hub 1 successfully opened
[   37.148000] ata3.00: configured for UDMA/100
[   37.148000] ata3: EH complete
[   37.148000] sd 2:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[   37.160000] sd 2:0:0:0: [sda] Write Protect is off
[   37.160000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   37.160000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   44.508000] vmnet1: no IPv6 routers present
[   44.864000] vmnet8: no IPv6 routers present
[  137.624000] ata3.00: exception Emask 0x2 SAct 0x36 SErr 0x0 action 0x2 frozen
[  137.624000] ata3.00: (spurious completions during NCQ issue=0x0 SAct=0x36 FIS=004040a1:00000008)
[  137.624000] ata3.00: cmd 60/08:08:f4:88:97/00:00:0f:00:00/40 tag 1 cdb 0x0 data 4096 in
[  137.624000]          res 40/00:08:f4:88:97/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
[  137.624000] ata3.00: cmd 60/08:10:7c:a3:ce/00:00:0f:00:00/40 tag 2 cdb 0x0 data 4096 in
[  137.624000]          res 40/00:08:f4:88:97/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
[  137.624000] ata3.00: cmd 60/18:20:1c:63:a3/00:00:0f:00:00/40 tag 4 cdb 0x0 data 12288 in
[  137.624000]          res 40/00:08:f4:88:97/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
[  137.624000] ata3.00: cmd 60/48:28:5c:0d:aa/00:00:0f:00:00/40 tag 5 cdb 0x0 data 36864 in
[  137.624000]          res 40/00:08:f4:88:97/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
[  137.936000] ata3: soft resetting port
[  138.108000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  138.108000] ata3.00: configured for UDMA/100
[  138.108000] ata3: EH complete
[  138.108000] sd 2:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[  138.108000] sd 2:0:0:0: [sda] Write Protect is off
[  138.108000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[  138.108000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  140.276000] NET: Registered protocol family 17
[  142.556000] wlan0: Initial auth_alg=0
[  142.556000] wlan0: authenticate with AP 00:03:c9:1d:d5:d5
[  142.560000] wlan0: RX authentication from 00:03:c9:1d:d5:d5 (alg=0 transaction=2 status=0)
[  142.560000] wlan0: authenticated
[  142.560000] wlan0: associate with AP 00:03:c9:1d:d5:d5
[  142.560000] wlan0: RX AssocResp from 00:03:c9:1d:d5:d5 (capab=0x411 status=0 aid=1)
[  142.560000] wlan0: associated
[  142.568000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  153.068000] wlan0: no IPv6 routers present
[  175.340000] wlan0: no IPv6 routers present
[ 2904.224000] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 2904.396000] usb 5-1: configuration #1 chosen from 1 choice
[ 2904.412000] input: Logitech Optical USB Mouse as /class/input/input10
[ 2904.412000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1
[ 3070.388000] ata3.00: exception Emask 0x2 SAct 0x3339 SErr 0x0 action 0x2 frozen
[ 3070.388000] ata3.00: (spurious completions during NCQ issue=0x0 SAct=0x3339 FIS=004040a1:00000080)
[ 3070.388000] ata3.00: cmd 60/08:00:cc:e6:97/00:00:0f:00:00/40 tag 0 cdb 0x0 data 4096 in
[ 3070.388000]          res 40/00:68:c4:fd:93/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
[ 3070.388000] ata3.00: cmd 60/08:18:4c:41:98/00:00:0f:00:00/40 tag 3 cdb 0x0 data 4096 in
[ 3070.388000]          res 40/00:68:c4:fd:93/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
[ 3070.388000] ata3.00: cmd 60/08:20:3c:f9:97/00:00:0f:00:00/40 tag 4 cdb 0x0 data 4096 in
[ 3070.388000]          res 40/00:68:c4:fd:93/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
[ 3070.388000] ata3.00: cmd 60/08:28:94:0b:98/00:00:0f:00:00/40 tag 5 cdb 0x0 data 4096 in
[ 3070.388000]          res 40/00:68:c4:fd:93/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
[ 3070.388000] ata3.00: cmd 60/08:40:14:40:98/00:00:0f:00:00/40 tag 8 cdb 0x0 data 4096 in
[ 3070.388000]          res 40/00:68:c4:fd:93/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
[ 3070.388000] ata3.00: cmd 60/08:48:34:40:98/00:00:0f:00:00/40 tag 9 cdb 0x0 data 4096 in
[ 3070.388000]          res 40/00:68:c4:fd:93/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
[ 3070.388000] ata3.00: cmd 60/08:60:1c:f8:97/00:00:0f:00:00/40 tag 12 cdb 0x0 data 4096 in
[ 3070.388000]          res 40/00:68:c4:fd:93/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
[ 3070.388000] ata3.00: cmd 60/08:68:c4:fd:93/00:00:0f:00:00/40 tag 13 cdb 0x0 data 4096 in
[ 3070.388000]          res 40/00:68:c4:fd:93/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
[ 3070.700000] ata3: soft resetting port
[ 3070.872000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3070.872000] ata3.00: configured for UDMA/100
[ 3070.872000] ata3: EH complete
[ 3070.872000] sd 2:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 3070.872000] sd 2:0:0:0: [sda] Write Protect is off
[ 3070.872000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3070.872000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3115.824000] ata3.00: exception Emask 0x2 SAct 0x3cc0 SErr 0x0 action 0x2 frozen
[ 3115.824000] ata3.00: (spurious completions during NCQ issue=0x0 SAct=0x3cc0 FIS=004040a1:00000020)
[ 3115.824000] ata3.00: cmd 60/10:30:9c:12:9a/00:00:0e:00:00/40 tag 6 cdb 0x0 data 8192 in
[ 3115.824000]          res 40/00:68:0c:a9:e5/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
[ 3115.824000] ata3.00: cmd 60/78:38:9c:15:9b/00:00:0e:00:00/40 tag 7 cdb 0x0 data 61440 in
[ 3115.824000]          res 40/00:68:0c:a9:e5/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
[ 3115.824000] ata3.00: cmd 60/08:50:ac:12:9a/00:00:0e:00:00/40 tag 10 cdb 0x0 data 4096 in
[ 3115.824000]          res 40/00:68:0c:a9:e5/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
[ 3115.824000] ata3.00: cmd 60/38:58:14:16:9b/00:00:0e:00:00/40 tag 11 cdb 0x0 data 28672 in
[ 3115.824000]          res 40/00:68:0c:a9:e5/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
[ 3115.824000] ata3.00: cmd 60/08:60:fc:a8:e5/00:00:0f:00:00/40 tag 12 cdb 0x0 data 4096 in
[ 3115.824000]          res 40/00:68:0c:a9:e5/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
[ 3115.824000] ata3.00: cmd 60/10:68:0c:a9:e5/00:00:0f:00:00/40 tag 13 cdb 0x0 data 8192 in
[ 3115.824000]          res 40/00:68:0c:a9:e5/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
[ 3116.136000] ata3: soft resetting port
[ 3116.308000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3116.308000] ata3.00: configured for UDMA/100
[ 3116.308000] ata3: EH complete
[ 3116.308000] sd 2:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 3116.308000] sd 2:0:0:0: [sda] Write Protect is off
[ 3116.308000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3116.308000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3121.236000] /dev/vmnet: open called by PID 7777 (vmware-vmx)
[ 3121.236000] /dev/vmnet: port on hub 8 successfully opened
[ 3121.544000] /dev/vmmon[7795]: host clock rate change request 0 -> 100
[ 5229.084000] wlan0: CTS protection enabled (BSSID=00:03:c9:1d:d5:d5)
[ 5231.440000] wlan0: CTS protection disabled (BSSID=00:03:c9:1d:d5:d5)
[ 5231.540000] wlan0: CTS protection enabled (BSSID=00:03:c9:1d:d5:d5)
[ 5238.096000] wlan0: CTS protection disabled (BSSID=00:03:c9:1d:d5:d5)
[ 6872.316000] ata3.00: configured for UDMA/100
[ 6872.316000] ata3: EH complete
[ 6872.316000] sd 2:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 6872.316000] sd 2:0:0:0: [sda] Write Protect is off
[ 6872.316000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6872.320000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9012.172000] /dev/vmmon[7777]: host clock rate change request 100 -> 0
[ 9012.196000] vmmon: Had to deallocate locked 97002 pages from vm driver dc4de000
[ 9012.200000] vmmon: Had to deallocate AWE 5020 pages from vm driver dc4de000
[10231.456000] /dev/vmnet: open called by PID 9610 (vmware-vmx)
[10231.456000] /dev/vmnet: port on hub 8 successfully opened
[10231.544000] /dev/vmmon[9623]: host clock rate change request 0 -> 19
[10245.712000] /dev/vmmon[9623]: host clock rate change request 19 -> 0
[10245.712000] /dev/vmmon[9623]: host clock rate change request 0 -> 100
[10264.136000] /dev/vmmon[9623]: host clock rate change request 100 -> 101
[10274.168000] /dev/vmmon[9623]: host clock rate change request 101 -> 100
[12537.096000] /dev/vmmon[9610]: host clock rate change request 100 -> 0
[12537.132000] vmmon: Had to deallocate locked 130014 pages from vm driver d6450000
[12537.136000] vmmon: Had to deallocate AWE 5902 pages from vm driver d6450000

merci pour ton aide

Kanor · Le 07/12/2007, à 15:40

Bizarre donne le retour de
modprobe -l | grep ric

voila la partie qui nous intéresse

   17.232000] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[   17.232000] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[   17.232000] uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26).
[   17.232000] uvcvideo: Failed to initialize the device (-5).
[   17.232000] usbcore: registered new interface driver uvcvideo
[   17.232000] USB Video Class driver (v0.1.0)

K -Lune noire · Le 07/12/2007, à 18:49

Bonjour

Je suis sous Kubuntu Gutsy et ma cam n'est pas reconnue

lsusb

Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 2770:905c NHJ, Ltd Che-Ez Snap SNAP-U/Digigr8/Soundstar TDC-35
Bus 001 Device 001: ID 0000:0000

Pas de Dev/video
par contre elle est reconnue comme un appareil photo....

cedthebear · Le 07/12/2007, à 19:52

Kanor a écrit :

cedthebear[/b] j'ai rien trouvé sur ta cam ..

Moi non plus c'est bien ce qui me chagrine.

Enfin si j'ai trouvé que l'OV534 n'est à priori pas supporté pour le moment
Le problème est de savoir combien de temps va durer le moment.

MErci quand même !

bebert33 · Le 07/12/2007, à 21:54

je n'arive pas a installemon pilote pwc our ma logitech pro4000

bebert33 · Le 07/12/2007, à 21:58

Pour info mon retour est:
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 003: ID 046d:08b2 Logitech, Inc. QuickCam Pro 4000
Bus 002 Device 002: ID 045e:0009 Microsoft Corp. IntelliMouse
Bus 002 Device 001: ID 0000:0000
merci

elmut · Le 08/12/2007, à 11:46

En fait "modprobe -l | grep ric" me retourne toutes les ligne car j'ai generic dans mon module

Alors voici ce que je trouve avec "uvc"

/lib/modules/2.6.22-14-generic/ubuntu/media/usbvideo/uvcvideo.ko

et pour "video"

$ modprobe -l | grep video
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/cpia_usb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/tuner-3036.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/dabusb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa5246a.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/cpia_pp.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/stv680.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/pwc/pwc.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/upd64031a.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/cx25840/cx25840.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/tlv320aic23b.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/tea6415c.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/vpx3220.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/ks0127.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/hexium_gemini.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/cpia2/cpia2.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/v4l2-common.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/tuner.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/meye.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-dvb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-alsa.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-empress.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa6752hs.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-oss.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/tda9840.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/usbvision/usbvision.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/ir-kbd-i2c.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/pms.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/w9966.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/tda9875.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7114.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/videocodec.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/btcx-risc.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/zr36050.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/wm8775.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/adv7175.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/pvrusb2/pvrusb2.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/bt856.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/cafe_ccic.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/zr36067.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/tda7432.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7110.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/wm8739.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/tvaudio.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/video-buf-dvb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7111.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7127.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/bw-qcam.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7115.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/se401.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa5249.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/compat_ioctl32.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/cx88/cx88-blackbird.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/cx88/cx88xx.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/cx88/cx8802.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/cx88/cx88-dvb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/cx88/cx8800.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/cx88/cx88-vp3054-i2c.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/cx88/cx88-alsa.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/usbvideo/ultracam.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/usbvideo/quickcam_messenger.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/usbvideo/usbvideo.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/usbvideo/konicawc.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/usbvideo/vicam.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/usbvideo/ibmcam.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/ivtv/ivtv.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/c-qcam.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/vivi.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/adv7170.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/videodev.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/bt866.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7185.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/ovcamchip/ovcamchip.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/bt819.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/video-buf.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/zr36016.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/sn9c102/sn9c102.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/zr36060.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa6588.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/tvp5150.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/em28xx/em28xx.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/stradis.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7191.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/zc0301/zc0301.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/cx2341x.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/v4l1-compat.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/et61x251/et61x251.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/tea6420.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/hexium_orion.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/cpia.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/bt8xx/bttv.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/zr364xx.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/tveeprom.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/cs53l32a.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/upd64083.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/ov7670.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/msp3400.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/w9968cf.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/vgastate.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/nvidia/nvidiafb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/tdfxfb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/sis/sisfb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/kyro/kyrofb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/tridentfb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/intelfb/intelfb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/vesafb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/fb_ddc.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/pm2fb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/i810/i810fb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/backlight/progear_bl.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/backlight/lcd.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/backlight/cr_bllcd.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/hecubafb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/s3fb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/neofb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/sm501fb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/geode/gxfb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/geode/gx1fb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/sysimgblt.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/pm3fb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/cyber2000fb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/fb_sys_fops.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/display/display.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/vt8623fb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/savage/savagefb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/riva/rivafb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/cyblafb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/s1d13xxxfb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/aty/radeonfb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/aty/atyfb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/aty/aty128fb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/console/tileblit.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/console/fbcon.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/console/softcursor.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/console/font.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/console/mdacon.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/console/bitblit.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/sstfb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/arkfb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/matrox/matroxfb_DAC1064.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/matrox/matroxfb_misc.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/matrox/matroxfb_crtc2.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/matrox/g450_pll.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/matrox/matroxfb_Ti3026.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/matrox/matroxfb_base.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/matrox/matroxfb_maven.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/matrox/matroxfb_g450.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/matrox/matroxfb_accel.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/matrox/i2c-matroxfb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/hgafb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/syscopyarea.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/vga16fb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/sysfillrect.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/svgalib.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/vermilion/crvml.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/vermilion/vmlfb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/macmodes.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/video/cirrusfb.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/acpi/video.ko
/lib/modules/2.6.22-14-generic/kernel/drivers/ieee1394/video1394.ko
/lib/modules/2.6.22-14-generic/ubuntu/media/usbvideo/uvcvideo.ko

merci pour ton aide !

jul62 · Le 08/12/2007, à 16:26

Bonjours,<p> je suis un petit nouveau sous ubuntu et je souhaiterais installer ma msi starcam. Quand je tape lsusb j'obtien 0c45:60c0 Microdia, j'ai chercher mais je ne sais pas comment faire tous les driver dispo sur le forum ne la gere pas.</br>
Merci d'avance pour votre aide </p>

Kanor · Le 08/12/2007, à 16:36

Recherche google 0c45:60c0
=> http://www.google.fr/search?q=0c45%3A60c0&ie=utf-8&oe=utf-8&aq=t&rls=com.ubuntu:en-US:official&client=firefox-a
Premier résultat:
http://doc.ubuntu-fr.org/gspca_spca5xx

mais avant installe camorama pour voir si elle est pas déja reconnu

Dernière modification par Kanor (Le 08/12/2007, à 16:37)

toomail · Le 08/12/2007, à 19:23

Je n'arrive toujours pas, non de non, a faire reconnaitre ma
webcam 0ac8:307b Z-Star Microelectronics Corp !

tout aide, truc technique, m'intresse !!!!

Merci

jul62 · Le 08/12/2007, à 20:17

merci kanor,
L'ajout des driver gspca n'as pas changer mon probléme, en faite ma cam est reconnue mais pas comme il faut, elle est detecte comme un modele sangha qui n'utilise pas le meme matériel. J'ai demandé à google: je suis sur plusieur piste, la plus généraliste consiste en l'utilisation d'une machine virtuelle.

Mordinateur · Le 09/12/2007, à 10:03

Salut salut,

j'ai posté déjà un message mais je me suis dit qu'il vallait peut être mieux en parler ici,

j'ai une caméra Aiptek Pocket DV3300, mon pc la détecte mais rien de plus, ni camorama, ni pidgin, ni ekiga ne la capte. j'ai pas trouvé s'il y avait quelque chose sur ce modèle.

j'ai essayé hier d'installer easycam2 jusqu'à ce qu'on me demande le cd d'ubuntu que je n'ai pas su trouver au moment donné. J'ai essayé plus tard encore mais pas moyen de remettre la main sur ce fameux easycam...

merci de vos rep...

Eden6371 · Le 09/12/2007, à 18:19

Bonjour,

Moi j'ai un problème avec ma webcam Lifecam VX-6000 de microsoft. Pas moyen de la faie reconnaitre et j'ai aussi essayé de l'installer via Wine (je suis debutant) mais j'ai un message qui me dit que je dois obligatoirement être sous windows.

N'existe-t-il quant même pas un autre moyen?

Merci d'avance.

Kanor · Le 09/12/2007, à 18:47

toomail je crois qu'il n'y a pas encore de méthode pour l'installer

jul62 débranche branche et tape dans un terminal dmesg et copie les derniére ligne
Mordinateur sur ton post ...

Eden6371 tape lsusb dans un terminal et copie le résultat

Eden6371 · Le 09/12/2007, à 18:51

Eden6371 tape lsusb dans un terminal et copie le résultat

voila:

julien@julien-desktop:~$ lsusb
Bus 002 Device 002: ID 045e:00f4 Microsoft Corp. 
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 001: ID 0000:0000

maxr397 · Le 09/12/2007, à 18:55

Bonjour,
je veins d'installer easycam 2, et lorsque je fait suivant j'ai droit à "aucune caméra trouvée ou caméra non compatible". Il s'agit d'une webcam intégrer à un protable MSI VR600-203.
Merci de me dire si il y a un espoir pour la faire fonctionner.

Dernière modification par maxr397 (Le 09/12/2007, à 19:03)

Kanor · Le 09/12/2007, à 18:56

Essaye ça
http://www.linux-projects.org/modules/mydownloads/visit.php?cid=7&lid=54
installe le paquet et essaye avec camaroma
et donne le retour de dmesg

maxr397 · Le 09/12/2007, à 19:13

donc camorama me donne " Could not connect to video device /dev/video0. Please check connection "
et dmesg me donne quelque chose de tellement long que tout ne s'affiche pas dans la console.

Dernière modification par maxr397 (Le 09/12/2007, à 19:31)

Eden6371 · Le 09/12/2007, à 19:41

euh....chez moi ce paquet a fait planter mon pc. Maintenant je sait plus ouvrir synaptic parce qu'il me dit que le fichier sn9cxxx doit etre reinstallé....

C'est ce que j'ai fais mais il me dit qu'il y a eu une erreur lors de l'installation....pffff

Et en plus de ça, quand j'ouvre le fichier moi-même, il me dit que le fichier est corrumpu, alors que je l'ai téléchargé 3 fois et que la premiere fois je n'avais pas de problème.

J'adore.

koyot · Le 09/12/2007, à 19:44

Pour ceux qui n'arrivent pas installer le dirver pwc malgré la stricte application de la procédure multiplement expliquée ici ou ailleurs (télécharger chez saillard, décompresser, compiler, enlever les anciens fichiers, décharger les anciens modules, charger les nouveaux, enfin je résume), j'ai enfin trouvé ce qui bloque !

je suis doublement content : non seulement ma webcam fonctionne enfin, ce qui est déjà bien en soit, mais aussi j'ai trouvé tout seul (enfin j'ai trouvé la solution que quelqu'un d'autre a développé, mais je m'en contente aisément, lol), et enfin c'est l'occasion d'apporter ma première contribution ici, et assurément elle va être utile à plusieurs personnes désespérées !

trève de bavardage, voici le détail qui bloque :

sur le site suivant :
http://www.lavrsen.dk/twiki/bin/view/PW … eKernel2x6
il est expliqué la même procédure que sur les autres sites et forums, à ceci près qu'il est indiqué de patcher le driver pour les versions de noyau 2.6.22 et supérieures !

donc :

1) télécharger le patch ici :
http://www.xs4all.nl/~carlo17/pwc/index.html
(enregistrer la cible sous)

2) patcher le driver :

patch -p1 < pwc-10.0.12-rc1-2.6.22.patch

(c'est "-p UN" et pas "-p L")
ensuite poursuivre le reste de la procédure !

Dernière modification par koyot (Le 09/12/2007, à 19:45)

Eden6371 · Le 09/12/2007, à 19:55

Allélouà¯a, j'ai réussit à installer ce machin.

Re: Centralisation Probleme Webcam+EasyCam
Essaye ça
http://www.linux-projects.org/modules/m â€¦ amp;lid=54
installe le paquet et essaye avec camaroma
et donne le retour de dmesg

Alors, camorama me dit qu'il lui est impossible de se connecter. Ensuite, tu veux vraiment que je te retourne ce que me marque dmesg? Alors voila, bonne lecture:

[    0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007bfb0000 (usable)
[    0.000000]  BIOS-e820: 000000007bfb0000 - 000000007bfc0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007bfc0000 - 000000007bff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007bff0000 - 000000007c000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000] 1087MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000ff780
[    0.000000] Entering add_active_range(0, 0, 507824) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   507824
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   507824
[    0.000000] On node 0 totalpages: 507824
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2175 pages used for memmap
[    0.000000]   HighMem zone: 276273 pages, LIFO batch:31
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP signature @ 0xC00FA110 checksum 0
[    0.000000] ACPI: RSDP 000FA110, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT 7BFB0000, 0034 (r1 A M I  OEMRSDT   9000610 MSFT       97)
[    0.000000] ACPI: FACP 7BFB0200, 0084 (r2 A M I  OEMFACP   9000610 MSFT       97)
[    0.000000] ACPI: DSDT 7BFB0440, 4D15 (r1  ALVN6 ALVN6123      123 INTL 20051117)
[    0.000000] ACPI: FACS 7BFC0000, 0040
[    0.000000] ACPI: APIC 7BFB0390, 0070 (r1 A M I  OEMAPIC   9000610 MSFT       97)
[    0.000000] ACPI: MCFG 7BFB0400, 003C (r1 A M I  OEMMCFG   9000610 MSFT       97)
[    0.000000] ACPI: OEMB 7BFC0040, 0060 (r1 A M I  AMI_OEM   9000610 MSFT       97)
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:15 APIC version 16
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 7c000000:82c00000)
[    0.000000] Built 1 zonelists.  Total pages: 503857
[    0.000000] Kernel command line: root=UUID=8a8709b7-95f0-4c2e-b6ee-481ddb7bde0f ro quiet splash locale=fr_FR
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 2410.959 MHz processor.
[   18.913386] spurious 8259A interrupt: IRQ7.
[   18.916810] Console: colour VGA+ 80x25
[   18.917136] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   18.917445] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   18.972113] Memory: 2002248k/2031296k available (2015k kernel code, 27900k reserved, 916k data, 364k init, 1113792k highmem)
[   18.972122] virtual kernel memory layout:
[   18.972123]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[   18.972124]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   18.972125]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   18.972126]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   18.972127]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[   18.972128]       .data : 0xc02f7d26 - 0xc03dce84   ( 916 kB)
[   18.972129]       .text : 0xc0100000 - 0xc02f7d26   (2015 kB)
[   18.972131] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   18.972164] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   19.052053] Calibrating delay using timer specific routine.. 4826.87 BogoMIPS (lpj=9653743)
[   19.052077] Security Framework v1.0.0 initialized
[   19.052083] SELinux:  Disabled at boot.
[   19.052094] Mount-cache hash table entries: 512
[   19.052203] CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001d
[   19.052211] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   19.052213] CPU: L2 Cache: 512K (64 bytes/line)
[   19.052215] CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001d
[   19.052224] Compat vDSO mapped to ffffe000.
[   19.052233] Checking 'hlt' instruction... OK.
[   19.068157] SMP alternatives: switching to UP code
[   19.068348] Freeing SMP alternatives: 11k freed
[   19.068593] Early unpacking initramfs... done
[   19.316151] ACPI: Core revision 20070126
[   19.316211] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   19.318088] CPU0: AMD Athlon(tm) 64 Processor 3800+ stepping 02
[   19.318104] Total of 1 processors activated (4826.87 BogoMIPS).
[   19.318341] ENABLING IO-APIC IRQs
[   19.318575] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[   19.463415] Brought up 1 CPUs
[   19.463519] Booting paravirtualized kernel on bare hardware
[   19.463577] Time: 19:14:24  Date: 11/09/107
[   19.463595] NET: Registered protocol family 16
[   19.463658] EISA bus registered
[   19.463670] ACPI: bus type pci registered
[   19.464437] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[   19.464439] PCI: Using configuration type 1
[   19.464440] Setting up standard PCI resources
[   19.472124] ACPI: EC: Look up EC in DSDT
[   19.476414] ACPI: Interpreter enabled
[   19.476416] ACPI: (supports S0 S1 S3 S4 S5)
[   19.476429] ACPI: Using IOAPIC for interrupt routing
[   19.476575] Error attaching device data
[   19.476578] Error attaching device data
[   19.483974] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   19.483982] PCI: Probing PCI hardware (bus 00)
[   19.484523] PCI: Transparent bridge - 0000:00:04.0
[   19.484692] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   19.484844] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   19.484932] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[   19.485004] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[   19.491024] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[   19.491184] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[   19.491365] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[   19.491524] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[   19.491681] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[   19.491837] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[   19.491994] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[   19.492152] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[   19.492309] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[   19.492466] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[   19.492624] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[   19.492808] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[   19.492971] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[   19.493131] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *10
[   19.493293] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[   19.493473] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[   19.493631] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[   19.493788] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
[   19.493988] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[   19.494055] Linux Plug and Play Support v0.97 (c) Adam Belay
[   19.494064] pnp: PnP ACPI init
[   19.494070] ACPI: bus type pnp registered
[   19.498467] pnp: PnP ACPI: found 15 devices
[   19.498468] ACPI: ACPI bus type pnp unregistered
[   19.498472] PnPBIOS: Disabled by ACPI PNP
[   19.498513] PCI: Using ACPI for IRQ routing
[   19.498515] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   19.505995] NET: Registered protocol family 8
[   19.505996] NET: Registered protocol family 20
[   19.506047] pnp: 00:07: iomem range 0x0-0x0 could not be reserved
[   19.506050] pnp: 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
[   19.506052] pnp: 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
[   19.506055] pnp: 00:07: iomem range 0xfee01000-0xfeefffff could not be reserved
[   19.506058] pnp: 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[   19.506061] pnp: 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
[   19.506066] pnp: 00:0c: ioport range 0x290-0x29f has been reserved
[   19.506069] pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[   19.506073] pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
[   19.506075] pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[   19.506077] pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[   19.506080] pnp: 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
[   19.507317] Time: tsc clocksource has been installed.
[   19.536238] PCI: Bridge: 0000:00:04.0
[   19.536239]   IO window: disabled.
[   19.536242]   MEM window: disabled.
[   19.536244]   PREFETCH window: disabled.
[   19.536246] PCI: Bridge: 0000:00:09.0
[   19.536247]   IO window: disabled.
[   19.536249]   MEM window: disabled.
[   19.536251]   PREFETCH window: disabled.
[   19.536253] PCI: Bridge: 0000:00:0b.0
[   19.536254]   IO window: disabled.
[   19.536256]   MEM window: disabled.
[   19.536257]   PREFETCH window: disabled.
[   19.536259] PCI: Bridge: 0000:00:0c.0
[   19.536260]   IO window: disabled.
[   19.536262]   MEM window: disabled.
[   19.536264]   PREFETCH window: disabled.
[   19.536273] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   19.536280] PCI: Setting latency timer of device 0000:00:09.0 to 64
[   19.536285] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   19.536290] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   19.536301] NET: Registered protocol family 2
[   19.575237] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   19.575345] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[   19.576275] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   19.576572] TCP: Hash tables configured (established 131072 bind 65536)
[   19.576574] TCP reno registered
[   19.587291] checking if image is initramfs... it is
[   20.038455] Switched to high resolution mode on CPU 0
[   20.071977] Freeing initrd memory: 7328k freed
[   20.072275] audit: initializing netlink socket (disabled)
[   20.072288] audit(1197227663.936:1): initialized
[   20.072338] highmem bounce pool size: 64 pages
[   20.073523] VFS: Disk quotas dquot_6.5.1
[   20.073556] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   20.073627] io scheduler noop registered
[   20.073629] io scheduler anticipatory registered
[   20.073630] io scheduler deadline registered
[   20.073641] io scheduler cfq registered (default)
[   20.597406] Boot video device is 0000:00:0d.0
[   20.597470] PCI: Setting latency timer of device 0000:00:09.0 to 64
[   20.597489] assign_interrupt_mode Found MSI capability
[   20.597491] Allocate Port Service[0000:00:09.0:pcie00]
[   20.597537] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   20.597555] assign_interrupt_mode Found MSI capability
[   20.597557] Allocate Port Service[0000:00:0b.0:pcie00]
[   20.597596] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   20.597613] assign_interrupt_mode Found MSI capability
[   20.597615] Allocate Port Service[0000:00:0c.0:pcie00]
[   20.597698] isapnp: Scanning for PnP cards...
[   20.950085] isapnp: No Plug & Play device found
[   20.966187] Real Time Clock Driver v1.12ac
[   20.966258] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   20.966343] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   20.966844] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   20.967294] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   20.967455] input: Macintosh mouse button emulation as /class/input/input0
[   20.967506] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   20.970440] serio: i8042 KBD port at 0x60,0x64 irq 1
[   20.970446] serio: i8042 AUX port at 0x60,0x64 irq 12
[   20.970563] mice: PS/2 mouse device common for all mice
[   20.970644] EISA: Probing bus 0 at eisa.0
[   20.970657] Cannot allocate resource for EISA slot 4
[   20.970659] Cannot allocate resource for EISA slot 5
[   20.970660] Cannot allocate resource for EISA slot 6
[   20.970666] EISA: Detected 0 cards.
[   20.970743] TCP cubic registered
[   20.970755] NET: Registered protocol family 1
[   20.970775] Using IPI No-Shortcut mode
[   20.970922]   Magic number: 3:895:242
[   20.970967]   hash matches device ttysf
[   20.971300] Freeing unused kernel memory: 364k freed
[   21.047106] input: AT Translated Set 2 keyboard as /class/input/input1
[   22.150395] AppArmor: AppArmor initialized<5>audit(1197227665.936:2):  type=1505 info="AppArmor initialized" pid=1226
[   22.155666] fuse init (API version 7.8)
[   22.159592] Failure registering capabilities with primary security module.
[   22.173341] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[   22.660697] usbcore: registered new interface driver usbfs
[   22.660718] usbcore: registered new interface driver hub
[   22.660733] usbcore: registered new device driver usb
[   22.661230] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   22.661529] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[   22.661539] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 16
[   22.661550] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   22.661553] ohci_hcd 0000:00:02.0: OHCI Host Controller
[   22.661725] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[   22.661771] ohci_hcd 0000:00:02.0: irq 16, io mem 0xdffff000
[   22.716595] SCSI subsystem initialized
[   22.719979] libata version 2.21 loaded.
[   22.728158] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[   22.743816] usb usb1: configuration #1 chosen from 1 choice
[   22.743839] hub 1-0:1.0: USB hub found
[   22.743848] hub 1-0:1.0: 10 ports detected
[   22.845887] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[   22.845899] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 17
[   22.845910] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   22.845912] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   22.845933] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[   22.845959] ehci_hcd 0000:00:02.1: debug port 1
[   22.845962] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[   22.845973] ehci_hcd 0000:00:02.1: irq 17, io mem 0xdfffec00
[   22.845980] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   22.846040] usb usb2: configuration #1 chosen from 1 choice
[   22.846063] hub 2-0:1.0: USB hub found
[   22.846069] hub 2-0:1.0: 10 ports detected
[   22.888682] Floppy drive(s): fd0 is 1.44M
[   22.914852] FDC 0 is a post-1991 82077
[   22.952929] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   22.952934] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   22.953409] NFORCE-MCP61: IDE controller at PCI slot 0000:00:06.0
[   22.953428] NFORCE-MCP61: chipset revision 162
[   22.953430] NFORCE-MCP61: not 100% native mode: will probe irqs later
[   22.953434] NFORCE-MCP61: BIOS didn't set cable bits correctly. Enabling workaround.
[   22.953438] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
[   22.953445]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
[   22.953455] Probing IDE interface ide0...
[   23.240801] hda: HDS728080PLAT20, ATA DISK drive
[   23.244699] usb 2-3: new high speed USB device using ehci_hcd and address 2
[   23.379503] usb 2-3: configuration #1 chosen from 1 choice
[   23.688006] hdb: PIONEER DVD-RW DVR-112D, ATAPI CD/DVD-ROM drive
[   23.744510] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   23.758959] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[   23.758968] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 18
[   23.758974] PCI: Setting latency timer of device 0000:00:07.0 to 64
[   23.758980] forcedeth: using HIGHDMA
[   23.765616] hda: max request size: 512KiB
[   23.772264] hda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(133)
[   23.772674] hda: cache flushes supported
[   23.772715]  hda: hda1 hda2 hda3
[   23.800726] hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
[   23.800734] Uniform CD-ROM driver Revision: 3.20
[   24.127528] Attempting manual resume
[   24.127532] swsusp: Resume From Partition 3:2
[   24.127533] PM: Checking swsusp image.
[   24.140598] PM: Resume from disk failed.
[   24.165252] kjournald starting.  Commit interval 5 seconds
[   24.165262] EXT3-fs: mounted filesystem with ordered data mode.
[   24.275447] eth0: forcedeth.c: subsystem: 01849:03ef bound to 0000:00:07.0
[   24.275571] sata_nv 0000:00:08.0: version 3.4
[   24.275858] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[   24.275876] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 19
[   24.275916] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   24.275992] scsi0 : sata_nv
[   24.276025] scsi1 : sata_nv
[   24.276068] ata1: SATA max UDMA/133 cmd 0x0001e400 ctl 0x0001e082 bmdma 0x0001d880 irq 19
[   24.276070] ata2: SATA max UDMA/133 cmd 0x0001e000 ctl 0x0001dc02 bmdma 0x0001d888 irq 19
[   24.586325] ata1: SATA link down (SStatus 0 SControl 300)
[   24.905760] ata2: SATA link down (SStatus 0 SControl 300)
[   24.916270] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[   24.916274] ACPI: PCI Interrupt 0000:00:08.1[b] -> Link [LSA1] -> GSI 23 (level, low) -> IRQ 16
[   24.916314] PCI: Setting latency timer of device 0000:00:08.1 to 64
[   24.916348] scsi2 : sata_nv
[   24.916391] scsi3 : sata_nv
[   24.916431] ata3: SATA max UDMA/133 cmd 0x0001d800 ctl 0x0001d482 bmdma 0x0001d000 irq 16
[   24.916434] ata4: SATA max UDMA/133 cmd 0x0001d400 ctl 0x0001d082 bmdma 0x0001d008 irq 16
[   25.225191] ata3: SATA link down (SStatus 0 SControl 300)
[   25.544623] ata4: SATA link down (SStatus 0 SControl 300)
[   31.481960] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[   31.481984] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x6000
[   32.020974] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   32.026279] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   32.241522] Linux agpgart interface v0.102 (c) Dave Jones
[   32.364307] input: PC Speaker as /class/input/input2
[   32.378477] parport_pc 00:06: reported by Plug and Play ACPI
[   32.378531] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   32.485729] nvidia: module license 'NVIDIA' taints kernel.
[   32.802439] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 22
[   32.802444] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LMC9] -> GSI 22 (level, low) -> IRQ 17
[   32.802451] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   32.802660] NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
[   32.821869] logips2pp: Detected unknown logitech mouse model 89
[   33.058734] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[   33.058740] ACPI: PCI Interrupt 0000:00:05.0[b] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 18
[   33.058759] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   33.212243] 2:2:1: cannot get freq at ep 0x84
[   33.218685] usbcore: registered new interface driver snd-usb-audio
[   33.262945] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   33.295056] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input3
[   34.010776] lp0: using parport0 (interrupt-driven).
[   34.048410] Adding 1951888k swap on /dev/hda2.  Priority:-1 extents:1 across:1951888k
[   34.444541] EXT3 FS on hda3, internal journal
[   37.443799] No dock devices found.
[   37.520939] input: Power Button (FF) as /class/input/input4
[   37.524751] ACPI: Power Button (FF) [PWRF]
[   37.550094] input: Power Button (CM) as /class/input/input5
[   37.553880] ACPI: Power Button (CM) [PWRB]
[   37.732789] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors (version 2.00.00)
[   37.732828] powernow-k8:    0 : fid 0x10 (2400 MHz), vid 0x8
[   37.732830] powernow-k8:    1 : fid 0xe (2200 MHz), vid 0xa
[   37.732832] powernow-k8:    2 : fid 0xc (2000 MHz), vid 0xc
[   37.732834] powernow-k8:    3 : fid 0xa (1800 MHz), vid 0xe
[   37.732835] powernow-k8:    4 : fid 0x2 (1000 MHz), vid 0x12
[   38.834623] ppdev: user-space parallel port driver
[   39.017870] audit(1197224084.062:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4831 profile="/usr/sbin/cupsd"
[   39.064388] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[   39.064393] apm: overridden by ACPI.
[   39.265373] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   39.334531] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   39.343414] NFSD: starting 90-second grace period
[   20.752000] Marking TSC unstable due to: cpufreq changes.
[   20.756000] Time: acpi_pm clocksource has been installed.
[   20.964000] Clocksource tsc unstable (delta = -127766925 ns)
[   21.708000] Failure registering capabilities with primary security module.
[   21.924000] Bluetooth: Core ver 2.11
[   21.924000] NET: Registered protocol family 31
[   21.924000] Bluetooth: HCI device and connection manager initialized
[   21.924000] Bluetooth: HCI socket layer initialized
[   21.960000] Bluetooth: L2CAP ver 2.8
[   21.960000] Bluetooth: L2CAP socket layer initialized
[   22.000000] Bluetooth: RFCOMM socket layer initialized
[   22.000000] Bluetooth: RFCOMM TTY layer initialized
[   22.000000] Bluetooth: RFCOMM ver 1.8
[   26.784000] NET: Registered protocol family 17
[   31.720000] NET: Registered protocol family 10
[   31.720000] lo: Disabled Privacy Extensions
[   42.328000] eth0: no IPv6 routers present

jul62 · Le 09/12/2007, à 23:56

jul62 débranche branche et tape dans un terminal dmesg et copie les derniére ligne

Je crois que ce qu'y t'interesse c'est :

[17080.808358] usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 128 rq 6 len 255 ret -110
[17081.806458] usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 128 rq 6 len 255 ret -110
[18762.348379] usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 2 ret -110
[29192.349847] usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 2 ret -110
[29433.309978] usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 2 ret -110
[33780.867284] usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 128 rq 6 len 255 ret -110
[33781.871941] usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 128 rq 6 len 255 ret -110
[34237.671725] usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 2 ret -110
[38688.782657] usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 2 ret -110
[48472.918835] usb 2-1: new full speed USB device using ohci_hcd and address 3
[48473.128289] usb 2-1: configuration #1 chosen from 1 choice
[48473.395227] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.44
[48473.397933] usb 2-1: SN9C105 PC Camera Controller detected (vid:pid 0x0C45:0x60C0)
[48473.706634] usb 2-1: No supported image sensor detected for this bridge
[48473.706787] usbcore: registered new interface driver sn9c102
[48473.714901] /usr/src/modules/gspca/gspca_core.c: USB GSPCA camera found. SONIX JPEG (sn9c1xx)
[48473.714910] /usr/src/modules/gspca/gspca_core.c: [spca5xx_probe:4041] Camera type JPEG
[48473.717647] /usr/src/modules/gspca/gspca_core.c: [spca5xx_getcapability:1198] maxw 640 maxh 480 minw 160 minh 120
[48473.718004] usbcore: registered new interface driver gspca
[48473.718123] /usr/src/modules/gspca/gspca_core.c: gspca driver 01.00.16 registered
[48473.926747] usbcore: registered new interface driver snd-usb-audio

jul62 · Le 10/12/2007, à 00:01

JE me suis un peu renseigné sur des forum en anglais, et le probleme viendrait du faite que le driver sn9c n'est pas compatible. j' ajouterais que le fait qu'une autre webcam porte les meme code fabriquant et matériel n'aide pas.
Cordialement

bebert33 · Le 10/12/2007, à 14:22

ma webcam n'est par reconnu sous easy cam2 c'est une logitech pro4000 merci de votre aide

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1851 Le 07/12/2007, à 14:30

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1852 Le 07/12/2007, à 15:10

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1853 Le 07/12/2007, à 15:40

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1854 Le 07/12/2007, à 18:49

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1855 Le 07/12/2007, à 19:52

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1856 Le 07/12/2007, à 21:54

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1857 Le 07/12/2007, à 21:58

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1858 Le 08/12/2007, à 11:46

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1859 Le 08/12/2007, à 16:26

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1860 Le 08/12/2007, à 16:36

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1861 Le 08/12/2007, à 19:23

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1862 Le 08/12/2007, à 20:17

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1863 Le 09/12/2007, à 10:03

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1864 Le 09/12/2007, à 18:19

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1865 Le 09/12/2007, à 18:47

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1866 Le 09/12/2007, à 18:51

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1867 Le 09/12/2007, à 18:55

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1868 Le 09/12/2007, à 18:56

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1869 Le 09/12/2007, à 19:13

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1870 Le 09/12/2007, à 19:41

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1871 Le 09/12/2007, à 19:44

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1872 Le 09/12/2007, à 19:55

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1873 Le 09/12/2007, à 23:56

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1874 Le 10/12/2007, à 00:01

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#1875 Le 10/12/2007, à 14:22

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Pied de page des forums