[Clos] Centralisation Probleme Webcam+EasyCam

Aldones · Le 03/12/2005, à 13:02

Hello
Un petit retour pour signaler que le easyqce.deb a fonctionné nickel chrome avec ma quickcam web.
Même après reboot, aucun problème.
Merci beaucoup pour ton boulot

ours_polaire · Le 03/12/2005, à 13:03

l installation est correcte mais la petite fenetre "chooser" ne semble pas fonctionner idem pour test.tcl
ca me frustre grrr

Anbreizh · Le 03/12/2005, à 13:13

@ Aldones : Merci de ton retour ! Je pourrais juste avec le resultat de ton "lsusb" pour mon projet EasyCam ?

@ ours_polaire : Tu n'a pas d'erreur pendant l'install ? (test une installe depuis la console )

ours_polaire · Le 03/12/2005, à 13:38

bon... voila ce que je fais, c est peut etre pas bon
root@ubuntu:/usr/bin# /usr/bin/easypwc
je tape entrée
je clique sur l option aMSN et ça donne ça

Driver|Amsn
pwc 75892 0
videodev 9344 3 pwc,quickcam,ov511
usbcore 104316 9 pwc,quickcam,ov511,snd_usb_audio,snd_usb_lib,ehci_hcd,uhci_hcd,ohci_hcd
dlsym[./libng/plugins/drv0-v4l2.so]: ./libng/plugins/drv0-v4l2.so: undefined symbol: _ng_plugin_init
dlsym[./libng/plugins/drv1-v4l.so]: ./libng/plugins/drv1-v4l.so: undefined symbol: _ng_plugin_init
WARNING: no plugins found [/home/keyes/ubuntu/amsncvs-20051023]
vid-probe: trying: v4l2...
vid-probe: trying: v4l...
open(/dev/video0): No such device
open(/dev/video1): No such device
open(/dev/video2): No such device
open(/dev/video3): No such device
vid-probe: trying: v4l2...
open(/dev/video0): No such device
open(/dev/video1): No such device
open(/dev/video2): No such device
open(/dev/video3): No such device

si il y a un paquet .deb je suis preneur

Anbreizh · Le 03/12/2005, à 13:45

tester un "lauchpwc" dans la console

ours_polaire · Le 03/12/2005, à 13:52

pareil ,ça peut venir de la distrib ou de mon kernel ? breezy 2.6.10-12-386

Anbreizh · Le 03/12/2005, à 14:08

L'erreur viens du faite que le peripherique video n'existe pas !
Mais la commande que je t'ai donner soit le créer normalement. C'est bizarre que ca ne fonction pas ! Tu peux me faire une copier de la commande "dmseg" quand tu branche la webcam ?

Anbreizh · Le 03/12/2005, à 14:37

Beta-Test de EasyCam !!!!

Alors, etat des lieux pour le moment :

- Script opérationel
- Liste de webcam autodecter limité (merci de m'aider pour pallier ce probleme )

Rendez vous au premier post pour les details d'installation

Anbreizh · Le 03/12/2005, à 14:47

Mise a jour de EasyCam :

Changelog :

- Maintenant l'autodetection est compatible avec les webcam EyeToys !

ours_polaire · Le 03/12/2005, à 14:52

ca donne ça
franck@ubuntu:~$ dmseg
bash: dmseg: command not found

Anbreizh · Le 03/12/2005, à 14:54

pardon .... "dmesg"

Anbreizh · Le 03/12/2005, à 14:55

Mise a jour EasyCam :

Changelog :

- Création d'un raccourcis dans le menu Systeme -> Administration -> EasyCam

ours_polaire · Le 03/12/2005, à 14:58

désolé

root@ubuntu:/home/franck# dmesg
[4294671.105000] CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
[4294671.105000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294671.105000] CPU: L2 Cache: 256K (64 bytes/line)
[4294671.105000] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020 00000000 00000000 00000000
[4294671.105000] CPU: AMD Sempron(tm) 2800+ stepping 00
[4294671.105000] Enabling fast FPU save and restore... done.
[4294671.105000] Enabling unmasked SIMD FPU exception support... done.
[4294671.105000] Checking 'hlt' instruction... OK.
[4294671.109000] Checking for popad bug... OK.
[4294671.109000] checking if image is initramfs... it is
[4294671.553000] Freeing initrd memory: 5171k freed
[4294671.554000] ACPI: Looking for DSDT in initrd... not found!
[4294671.605000] not found!
[4294671.613000] ENABLING IO-APIC IRQs
[4294671.613000] ..TIMER: vector=0x31 pin1=2 pin2=-1
[4294671.724000] NET: Registered protocol family 16
[4294671.724000] EISA bus registered
[4294671.724000] ACPI: bus type pci registered
[4294671.724000] PCI: PCI BIOS revision 2.10 entry at 0xfdab1, last bus=1
[4294671.724000] PCI: Using configuration type 1
[4294671.724000] mtrr: v2.0 (20020519)
[4294671.725000] ACPI: Subsystem revision 20050729
[4294671.731000] ACPI: Interpreter enabled
[4294671.731000] ACPI: Using IOAPIC for interrupt routing
[4294671.732000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294671.732000] PCI: Probing PCI hardware (bus 00)
[4294671.732000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
[4294671.735000] Boot video device is 0000:01:00.0
[4294671.739000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294671.742000] ACPI: Power Resource [URP1] (off)
[4294671.742000] ACPI: Power Resource [URP2] (off)
[4294671.742000] ACPI: Power Resource [FDDP] (off)
[4294671.742000] ACPI: Power Resource [LPTP] (off)
[4294671.743000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[4294671.743000] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[4294671.743000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[4294671.743000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[4294671.744000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294671.744000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294671.744000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294671.744000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294671.744000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294671.744000] pnp: PnP ACPI init
[4294671.747000] pnp: PnP ACPI: found 10 devices
[4294671.748000] PnPBIOS: Disabled by ACPI PNP
[4294671.748000] PCI: Using ACPI for IRQ routing
[4294671.748000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294671.750000] audit: initializing netlink socket (disabled)
[4294671.750000] audit: initialized
[4294671.750000] VFS: Disk quotas dquot_6.5.1
[4294671.750000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294671.750000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
[4294671.750000] devfs: boot_options: 0x0
[4294671.751000] Initializing Cryptographic API
[4294671.751000] isapnp: Scanning for PnP cards...
[4294672.104000] isapnp: No Plug & Play device found
[4294672.121000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294672.717000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294672.718000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294672.718000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
[4294672.718000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.720000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.720000] io scheduler noop registered
[4294672.720000] io scheduler anticipatory registered
[4294672.720000] io scheduler deadline registered
[4294672.720000] io scheduler cfq registered
[4294672.720000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294672.722000] EISA: Probing bus 0 at eisa.0
[4294672.722000] EISA: Detected 0 cards.
[4294672.722000] NET: Registered protocol family 2
[4294672.737000] IP: routing cache hash table of 8192 buckets, 64Kbytes
[4294672.737000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[4294672.739000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294672.739000] TCP: Hash tables configured (established 131072 bind 65536)
[4294672.740000] NET: Registered protocol family 8
[4294672.740000] NET: Registered protocol family 20
[4294672.740000] ACPI wakeup devices:
[4294672.740000] PCI0 USB1 USB2 USB3 USB4 EHCI USBD UAR1 AC9 MC9 ILAN SLPB
[4294672.740000] ACPI: (supports S0 S3 S4 S5)
[4294672.740000] Freeing unused kernel memory: 224k freed
[4294672.757000] vga16fb: initializing
[4294672.757000] vga16fb: mapped to 0xc00a0000
[4294672.887000] Console: switching to colour frame buffer device 80x30
[4294672.887000] fb0: VGA16 VGA frame buffer device
[4294672.934000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294674.000000] Capability LSM initialized
[4294674.012000] NET: Registered protocol family 1
[4294674.023000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294674.023000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294674.023000] ACPI: bus type ide registered
[4294674.029000] VP_IDE: IDE controller at PCI slot 0000:00:0f.0
[4294674.029000] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 20
[4294674.029000] PCI: Via IRQ fixup for 0000:00:0f.0, from 255 to 4
[4294674.029000] VP_IDE: chipset revision 6
[4294674.029000] VP_IDE: not 100% native mode: will probe irqs later
[4294674.029000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
[4294674.029000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[4294674.029000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[4294674.029000] Probing IDE interface ide0...
[4294674.821000] hda: PHILIPS DVDR1640P, ATAPI CD/DVD-ROM drive
[4294675.535000] hdb: IDE-CD R/RW 16x10A, ATAPI CD/DVD-ROM drive
[4294675.586000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294675.587000] Probing IDE interface ide1...
[4294675.970000] hdc: Maxtor 6Y080L0, ATA DISK drive
[4294676.582000] ide1 at 0x170-0x177,0x376 on irq 15
[4294676.582000] Probing IDE interface ide2...
[4294677.095000] Probing IDE interface ide3...
[4294677.607000] Probing IDE interface ide4...
[4294678.119000] Probing IDE interface ide5...
[4294678.636000] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[4294678.636000] Uniform CD-ROM driver Revision: 3.20
[4294678.644000] hdb: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache
[4294678.652000] hdc: max request size: 128KiB
[4294678.659000] hdc: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[4294678.659000] hdc: cache flushes supported
[4294678.659000] /dev/ide/host0/bus1/target0/lun0: p1 < p5 p6 p7 >
[4294679.021000] Attempting manual resume
[4294679.034000] swsusp: Suspend partition has wrong signature?
[4294679.058000] usbcore: registered new driver usbfs
[4294679.058000] usbcore: registered new driver hub
[4294679.059000] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[4294679.059000] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294679.059000] ohci_hcd 0000:00:05.0: OPTi Inc. 82C861
[4294679.059000] ohci_hcd 0000:00:05.0: new USB bus registered, assigned bus number 1
[4294679.059000] ohci_hcd 0000:00:05.0: irq 16, io mem 0xdffff000
[4294679.112000] hub 1-0:1.0: USB hub found
[4294679.112000] hub 1-0:1.0: 2 ports detected
[4294679.130000] USB Universal Host Controller Interface driver v2.2
[4294679.130000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
[4294679.130000] PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5
[4294679.130000] uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[4294679.192000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[4294679.192000] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e000
[4294679.192000] hub 2-0:1.0: USB hub found
[4294679.192000] hub 2-0:1.0: 2 ports detected
[4294679.195000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
[4294679.195000] PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 5
[4294679.195000] uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
[4294679.257000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[4294679.257000] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e400
[4294679.257000] hub 3-0:1.0: USB hub found
[4294679.257000] hub 3-0:1.0: 2 ports detected
[4294679.260000] ACPI: PCI Interrupt 0000:00:10.2[b] -> GSI 21 (level, low) -> IRQ 21
[4294679.260000] PCI: Via IRQ fixup for 0000:00:10.2, from 3 to 5
[4294679.260000] uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
[4294679.292000] usb 1-2: new full speed USB device using ohci_hcd and address 2[4294679.322000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[4294679.322000] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800
[4294679.322000] hub 4-0:1.0: USB hub found
[4294679.322000] hub 4-0:1.0: 2 ports detected
[4294679.325000] ACPI: PCI Interrupt 0000:00:10.3[b] -> GSI 21 (level, low) -> IRQ 21
[4294679.325000] PCI: Via IRQ fixup for 0000:00:10.3, from 3 to 5
[4294679.325000] uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
[4294679.387000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[4294679.387000] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ec00
[4294679.387000] hub 5-0:1.0: USB hub found
[4294679.387000] hub 5-0:1.0: 2 ports detected
[4294679.419000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
[4294679.419000] ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0
[4294679.419000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 6
[4294679.419000] ehci_hcd 0000:00:10.4: irq 21, io mem 0xdfffee00
[4294679.419000] ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
[4294679.419000] hub 6-0:1.0: USB hub found
[4294679.419000] hub 6-0:1.0: 8 ports detected
[4294679.462000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[4294679.463000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
[4294679.463000] PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 7
[4294679.463000] eth0: VIA Rhine II at 0x1d800, 00:11:09:e9:fb:3d, IRQ 23.
[4294679.463000] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[4294681.963000] ACPI: CPU0 (power states: C1[C1])
[4294682.121000] Attempting manual resume
[4294682.121000] swsusp: Suspend partition has wrong signature?
[4294682.128000] EXT3-fs: INFO: recovery required on readonly filesystem.
[4294682.128000] EXT3-fs: write access will be enabled during recovery.
[4294682.136000] kjournald starting. Commit interval 5 seconds
[4294682.136000] EXT3-fs: recovery complete.
[4294682.136000] EXT3-fs: mounted filesystem with ordered data mode.
[4294683.167000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294686.628000] Adding 1172672k swap on /dev/hdc5. Priority:-1 extents:1
[4294686.841000] EXT3 FS on hdc6, internal journal
[4294692.011000] parport: PnPBIOS parport detected.
[4294692.011000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[4294692.096000] lp0: using parport0 (interrupt-driven).
[4294692.130000] mice: PS/2 mouse device common for all mice
[4294692.169000] Linux agpgart interface v0.101 (c) Dave Jones
[4294692.218000] nvidia: module license 'NVIDIA' taints kernel.
[4294692.246000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294692.247000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7667 Fri Jun 17 07:01:04 PDT 2005
[4294692.406000] input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
[4294692.859000] ts: Compaq touchscreen protocol output
[4294695.160000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294695.810000] cdrom: open failed.
[4294695.815000] cdrom: open failed.
[4294697.922000] kjournald starting. Commit interval 5 seconds
[4294697.923000] EXT3 FS on hdc7, internal journal
[4294697.923000] EXT3-fs: mounted filesystem with ordered data mode.
[4294699.875000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[4294699.900000] agpgart: AGP aperture is 128M @ 0xe0000000
[4294699.985000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294699.998000] shpchp: shpc_init : shpc_cap_offset == 0
[4294699.998000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294700.692000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
[4294700.692000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 6
[4294700.692000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[4294703.347000] usbcore: registered new driver snd-usb-audio
[4294703.693000] Real Time Clock Driver v1.12
[4294703.787000] input: PC Speaker
[4294704.006000] Floppy drive(s): fd0 is 1.44M
[4294704.021000] FDC 0 is a post-1991 82077
[4294704.875000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294704.886000] NET: Registered protocol family 17
[4294707.359000] NET: Registered protocol family 10
[4294707.360000] Disabled Privacy Extensions on device c02eb280(lo)
[4294707.360000] IPv6 over IPv4 tunneling driver
[4294708.592000] ACPI: Power Button (FF) [PWRF]
[4294708.592000] ACPI: Power Button (CM) [PWRB]
[4294708.592000] ACPI: Sleep Button (CM) [SLPB]
[4294708.693000] ibm_acpi: ec object not found
[4294713.908000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[4294713.908000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[4294713.908000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[4294714.161000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[4294714.161000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[4294714.161000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[4294716.846000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294716.846000] apm: overridden by ACPI.
[4294716.945000] ip_tables: (C) 2000-2002 Netfilter core team
[4294716.975000] ip_conntrack version 2.1 (6143 buckets, 49144 max) - 248 bytes per conntrack
[4294718.202000] eth0: no IPv6 routers present
[4294719.387000] Bluetooth: Core ver 2.7
[4294719.387000] NET: Registered protocol family 31
[4294719.387000] Bluetooth: HCI device and connection manager initialized
[4294719.387000] Bluetooth: HCI socket layer initialized
[4294719.422000] Bluetooth: L2CAP ver 2.7
[4294719.422000] Bluetooth: L2CAP socket layer initialized
[4294719.437000] Bluetooth: RFCOMM ver 1.5
[4294719.437000] Bluetooth: RFCOMM socket layer initialized
[4294719.437000] Bluetooth: RFCOMM TTY layer initialized
[4294914.461000] Linux video capture interface: v1.00
[4294914.468000] pwc Philips webcam module version 10.0.6-unofficial loaded.
[4294914.468000] pwc Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
[4294914.468000] pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
[4294914.468000] pwc the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
[4294914.468000] pwc Trace options: 0x00a1
[4294914.473000] usbcore: registered new driver Philips webcam
root@ubuntu:/home/franck#

Anbreizh · Le 03/12/2005, à 15:01

C'est bizarre , il semble bien la détecter.
Tu as un erreur avec la commande suivant : mknod /dev/video0 c 81 0 ?
Tu peux faire apres un :

sudo apt-get install webcam

puis un

webcam

dans la console ?

EDIT : Ne reboot pas apres la 1er commande !

Dernière modification par Anbreizh (Le 03/12/2005, à 15:04)

ours_polaire · Le 03/12/2005, à 15:13

ça donne ça

root@ubuntu:/home/franck# mknod /dev/video0 c 81 0
root@ubuntu:/home/franck# sudo apt-get install webcam
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Paquets recommandés :
ssh
Les NOUVEAUX paquets suivants seront installés :
webcam
0 mis à jour, 1 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 31,8ko dans les archives.
Après dépaquetage, 111ko d'espace disque supplémentaires seront utilisés.
Réception de : 1 http://fr.archive.ubuntu.com breezy/universe webcam 3.94-1ubuntu5 [31,8kB]
31,8ko réceptionnés en 0s (74,3ko/s)

Préconfiguration des paquets ...
Sélection du paquet webcam précédemment désélectionné.
(Lecture de la base de données... 92645 fichiers et répertoires déjà installés.)Dépaquetage de webcam (à partir de .../webcam_3.94-1ubuntu5_i386.deb) ...
Paramétrage de webcam (3.94-1ubuntu5) ...
root@ubuntu:/home/franck# webcam
reading config file: /root/.webcamrc
v4l2: open /dev/video0: No such device
v4l2: open /dev/video0: No such device
v4l: open /dev/video0: No such device
no grabber device available

Anbreizh · Le 03/12/2005, à 15:16

C'est vraiment bizarre ....... Il dis qu'il n'existe toujour pas. Je vais me vois comment c'est possible
Je te tient au courant !

Aldones · Le 03/12/2005, à 16:43

Mon lsusb comme demandé :

Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 046d:0850 Logitech, Inc. QuickCam Web
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 046d:c510 Logitech, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

Le seconde entrée logitech concerne ma souris, donc rien à voir avec la webcam

Anbreizh · Le 03/12/2005, à 16:51

Merci !

C'est ajouter pour le driver QCE !

Dernière modification par Anbreizh (Le 03/12/2005, à 16:52)

ours_polaire · Le 03/12/2005, à 19:01

ayé ça fonctionne sur gnome meeting
j ai suivi le tuto de cette page :
http://wiki.ubuntu-fr.org/materiel/webcam_logitech_msn

Anbreizh · Le 03/12/2005, à 19:04

Ok merci ! Je vais ameliorer mon script, voir ce qui manque !

Anbreizh · Le 03/12/2005, à 19:22

Ps : C'est totalement normal que ca marche pas avec le driver que je t'ai dis d'utiliser ! Dasn ton cas, il fallait utilise EasyQce (qui ne vas plus exister ! ). Pour m'aider, tu voudrais bien tester EasyCam et me dire si l'installation marche ?
Merci d'avance

Mantacool · Le 03/12/2005, à 20:13

Si je lance la commande "webcam en console "j'obtiens :
webcam
reading config file: /home/vincent/.webcamrc
v4l2: open /dev/video0: Device or resource busy
v4l2: open /dev/video0: Device or resource busy
v4l: open /dev/video0: Device or resource busy
no grabber device available

si ça peux aider ....

Anbreizh · Le 03/12/2005, à 20:17

Tu as un autre logiciel qui utilise la webcam ?

Anbreizh · Le 03/12/2005, à 20:28

Mise a jour de EasyCam :

Changelog :

- Ajout de ID 0ac8:301b Z-Star Microelectronics Corp. Sansun SN-510 WebCam [hv713d] pour l'autodetection

typhoe · Le 03/12/2005, à 20:30

bonjour,

je viens d'essayer de tester easycam sur une install "fraiche" de breezy.

Si je clique sur l'icone dans admininstration, rien ne se passe apèrs la demande de password
Si je le lance depuis un terminal, j'ai une erreur:
/usr/bin/easycam: line 119:syntax error near unexpected token `else'
/usr/bin/easycam: line 119:`else'

???

Merci de ton aide

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#226 Le 03/12/2005, à 13:02

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#227 Le 03/12/2005, à 13:03

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#228 Le 03/12/2005, à 13:13

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#229 Le 03/12/2005, à 13:38

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#230 Le 03/12/2005, à 13:45

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#231 Le 03/12/2005, à 13:52

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#232 Le 03/12/2005, à 14:08

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#233 Le 03/12/2005, à 14:37

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#234 Le 03/12/2005, à 14:47

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#235 Le 03/12/2005, à 14:52

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#236 Le 03/12/2005, à 14:54

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#237 Le 03/12/2005, à 14:55

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#238 Le 03/12/2005, à 14:58

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#239 Le 03/12/2005, à 15:01

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#240 Le 03/12/2005, à 15:13

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#241 Le 03/12/2005, à 15:16

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#242 Le 03/12/2005, à 16:43

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#243 Le 03/12/2005, à 16:51

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#244 Le 03/12/2005, à 19:01

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#245 Le 03/12/2005, à 19:04

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#246 Le 03/12/2005, à 19:22

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#247 Le 03/12/2005, à 20:13

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#248 Le 03/12/2005, à 20:17

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#249 Le 03/12/2005, à 20:28

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#250 Le 03/12/2005, à 20:30

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Pied de page des forums