Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1 … 11 12 13 14 15 … 48

#301 Le 26/11/2005, à 10:15

da_last_dodo

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Bonjour,
J'ai installé les pilotes qui vient du site d'Ati quelques temps avant de tomber sur ce poste et je voudrais savoir comment les désinstaller pour suivre ce tuto.
Merci d'avance !

Netbook Acer 1410 - Dual Ubuntu 10.04 / Windows 7

Hors ligne

#302 Le 26/11/2005, à 11:02

racoon

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Bonjour les gens, je suis nouveau ici (et nouveau aussi pour Ubuntu et Linux, même si j'avais déjà un peu bidouillé Nux dans le passé).

Bon, j'avais galéré pour configurer ma connexion réseau (Wifi et WPA), mais ça, c'est fait.

Maintenant, je galère pour configurer ma Radeon 9800 PRO.

Ma config :
P4-3.2GHZ HT
1 Go RAM
Chipset Intel (enfin, je suppose, mon PC est un DELL)
Radeon 9800 PRO avec 128 MB de RAM

Et, meme avec ce matos respectable, avec glxgears je suis à.............. 190fps roll

J'ai suivi le tuto en tête de ce topic, fouiné partout sur le net, retourné mes fichiers de config dans tous les sens, rien n'y fait.

Voici ce que donne glxinfo chez moi :

name of display: :0.0
display: :0  screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_ATI_pixel_format_float,
    GLX_ATI_render_texture
GLX version: 1.2
GLX extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_multisample
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.2.1)
OpenGL extensions:
    GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_texture_border_clamp,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
    GL_ARB_transpose_matrix, GL_EXT_abgr, GL_EXT_blend_color,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_texture_env_add,
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
    GL_EXT_texture_lod_bias
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 24 tc  0 24  0 r  y  .  8  8  8  0  0 16  0  0  0  0  0  1 0 None
0x24 24 tc  0 24  0 r  y  .  8  8  8  0  0 16  8 16 16 16  0  1 0 None
0x25 24 tc  0 32  0 r  y  .  8  8  8  8  0 16  8 16 16 16 16  1 0 None
0x26 24 tc  0 32  0 r  .  .  8  8  8  8  0 16  8 16 16 16 16  1 0 None
0x27 24 dc  0 24  0 r  y  .  8  8  8  0  0 16  0  0  0  0  0  1 0 None
0x28 24 dc  0 24  0 r  y  .  8  8  8  0  0 16  8 16 16 16  0  1 0 None
0x29 24 dc  0 32  0 r  y  .  8  8  8  8  0 16  8 16 16 16 16  1 0 None
0x2a 24 dc  0 32  0 r  .  .  8  8  8  8  0 16  8 16 16 16 16  1 0 Non

Donc, si je pige bien, j'ai l'accélération 2D matérielle, mais la 3D logicielle...

Voici mon /etc/modules :

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
agpgart
intel-agp
fglrx
lp
mousedev
psmouse
sbp2
sr_mod

Et enfin voici mon /etc/X11/xorg.conf :

# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.

# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 

#    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
#    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
#    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

    FontPath	"/usr/share/X11/fonts/misc"
    FontPath	"/usr/share/X11/fonts/cyrillic"
    FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath	"/usr/share/X11/fonts/Type1"
    FontPath	"/usr/share/X11/fonts/CID"
    FontPath	"/usr/share/X11/fonts/100dpi"
    FontPath	"/usr/share/X11/fonts/75dpi"
    # paths to defoma fonts
    FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option "Protocol"   "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"

#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"   "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"   "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"   "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"   "xfree86"
#    Option "XkbModel"   "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""

#    Option "XkbDisable"

    Option "XkbRules"	"xfree86"
    Option "XkbModel"	"pc105"
    Option "XkbLayout"	"fr"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier	"Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"   "9600"
#    Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "1412"
#    Option     "MaxX"           "15184"
#    Option     "MinY"           "15372"
#    Option     "MaxY"           "1230"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "231"
#    Option     "MaxX"           "3868"
#    Option     "MinY"           "3858"
#    Option     "MaxY"           "272"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonThreshold"    "17"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier  "Monitor0"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode 
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset     "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver      "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.

#    BusID       "PCI:0:10:0"

#    VideoRam    256

#    Clocks      25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "(null)" 
    Option "ScreenOverlap"              "0" 
    Option "GammaCorrectionI"           "0x06419064"
    Option "GammaCorrectionII"          "0x06419064"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
    Option "CapabilitiesEx"             "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "yes"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:0:0"    # vendor=1002, device=4e48
    Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

    Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###

Voilà, si une bonne âme pouvait me filer un coup de main big_smile

Hors ligne

#303 Le 26/11/2005, à 15:12

SkeRoy

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

oups, je me disais bien que c'est faible chez moi (radeon 9700 128Mo).
M'enfin, je peux jouer à tous les jeux 3D...

~$ fgl_glxgears
2410 frames in 5.0 seconds = 482.000 FPS
3679 frames in 5.0 seconds = 735.800 FPS
3712 frames in 5.0 seconds = 742.400 FPS
3744 frames in 5.0 seconds = 748.800 FPS
3743 frames in 5.0 seconds = 748.600 FPS
3747 frames in 5.0 seconds = 749.400 FPS
3748 frames in 5.0 seconds = 749.600 FPS
3635 frames in 5.0 seconds = 727.000 FPS
3713 frames in 5.0 seconds = 742.600 FPS
3482 frames in 5.0 seconds = 696.400 FPS

Hors ligne

#304 Le 09/12/2005, à 19:04

ToRkEm

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Bonjour à tous,

Tout d'abord, merci pour le HowTo...j'avoue que j'aurais galéré pas mal sinon....Je viens juste d'installer fglrx et sans ce tuto....
Bon j'ai un petit soucis : Quand je fait fglrxgears, j'ai bien les roues dentées mais il ne me renvoie aucun résultats...pas de fps, rien, que dalle, nada, niet !

Soit j'ai loupé un épisode soit il y a une option que je n'ai pas utilisée....

Merci à tous pour l'aide que vous apportez sur ce forum !!

To[Rk]Em
Ubuntu 8.10
---------------------------------------------------------
Rien ne sert de courir...non ca sert à rien

Hors ligne

#305 Le 09/12/2005, à 19:07

jap

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

glxgears -printfps

A compléter ...

Hors ligne

#306 Le 09/12/2005, à 19:24

SkeRoy

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Merci!
Ah oui chez moi c'est mieux alors!!

glxgears -printfps
10478 frames in 5.0 seconds = 2095.584 FPS
10739 frames in 5.0 seconds = 2147.611 FPS
18629 frames in 5.0 seconds = 3725.681 FPS
16981 frames in 5.0 seconds = 3395.993 FPS
13325 frames in 5.0 seconds = 2664.973 FPS
22761 frames in 5.0 seconds = 4552.084 FPS
22813 frames in 5.0 seconds = 4562.585 FPS
22890 frames in 5.0 seconds = 4577.961 FPS

Hors ligne

#307 Le 09/12/2005, à 19:28

ToRkEm

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Bon sang mais pourquoi n'y ai je pas pensé....
Merci !

To[Rk]Em
Ubuntu 8.10
---------------------------------------------------------
Rien ne sert de courir...non ca sert à rien

Hors ligne

#308 Le 10/12/2005, à 11:45

beny

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

fgl_glxgears
3749 frames in 5.0 seconds = 749.800 FPS
3123 frames in 5.0 seconds = 624.600 FPS
4275 frames in 5.0 seconds = 855.000 FPS
1836 frames in 5.0 seconds = 367.200 FPS
4420 frames in 5.0 seconds = 884.000 FPS
4436 frames in 5.0 seconds = 887.200 FPS
4434 frames in 5.0 seconds = 886.800 FPS
glxgears -printfps
21380 frames in 5.0 seconds = 4275.865 FPS
22886 frames in 5.0 seconds = 4577.026 FPS
22886 frames in 5.0 seconds = 4577.098 FPS
22885 frames in 5.0 seconds = 4576.908 FPS
22885 frames in 5.0 seconds = 4576.867 FPS
22883 frames in 5.0 seconds = 4576.592 FPS
22881 frames in 5.0 seconds = 4576.090 FPS

athlonXP 2.2
512 mb
ati 9800pro 128 mb:D

#309 Le 13/12/2005, à 11:44

PsykotropyK

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

moi qui trouvé que ct ultra lent, j'ai fait avec printfps et en fait chui content... C'est que ca allé trop vite pour que ca s'affiche bien lol...

25734 frames in 5.0 seconds = 5146.751 FPS
25908 frames in 5.0 seconds = 5181.432 FPS
25876 frames in 5.0 seconds = 5175.041 FPS
25927 frames in 5.0 seconds = 5185.306 FPS
25971 frames in 5.0 seconds = 5194.077 FPS
24956 frames in 5.0 seconds = 4991.082 FPS
25910 frames in 5.0 seconds = 5181.991 FPS
25823 frames in 5.0 seconds = 5164.468 FPS

Hors ligne

#310 Le 16/12/2005, à 17:21

ursule

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

J'ai fait l'install sur mon Asus portable avec une Mobility Radeon 9700.
Ca marche impeccable, mais ça diminue la résolution de l'écran. fglrx ne propose pas de résolution 1200x800, seule la résolution 1024x768 est possible. Quelqu'un aurait déjà trouvé une solution?

Hors ligne

#311 Le 17/12/2005, à 12:49

yassine2005

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

yassine@Yasine-Ubuntu510:~$ glxgears -printfps
11284 frames in 5.2 seconds = 2180.779 FPS
20250 frames in 5.0 seconds = 4049.898 FPS
15069 frames in 5.0 seconds = 2987.175 FPS
20368 frames in 5.0 seconds = 4073.543 FPS
16515 frames in 5.0 seconds = 3302.755 FPS
11423 frames in 5.0 seconds = 2284.550 FPS
18523 frames in 5.0 seconds = 3704.513 FPS
15320 frames in 5.0 seconds = 3063.951 FPS
19925 frames in 5.0 seconds = 3953.459 FPS
16112 frames in 5.0 seconds = 3222.269 FPS
20205 frames in 5.0 seconds = 4040.943 FPS
13892 frames in 5.0 seconds = 2778.396 FPS
17953 frames in 5.0 seconds = 3590.512 FPS
16280 frames in 5.0 seconds = 3255.909 FPS
yassine@Yasine-Ubuntu510:~$ fgl_glxgears
1599 frames in 5.0 seconds = 319.800 FPS
2681 frames in 5.0 seconds = 536.200 FPS
1681 frames in 5.0 seconds = 336.200 FPS
yassine@Yasine-Ubuntu510:~$





amd athlon xp 2400+
ati radeon 9600 pro 256 ddr 4x
512 sdram pc 133

#312 Le 17/12/2005, à 16:04

ursule

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

[b]J'ai trouvé la solution à mon problème de résolution d'écran: j'édite le fichier /etc/X11/xorg.conf[/b]::)

**********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1280x800" "800x600" "640x480"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection

[b]A la ligne "Modes" rajouter la résolution de mon écran, ici 1280x800[/b]

Dernière modification par ursule (Le 17/12/2005, à 16:06)

Hors ligne

#313 Le 19/12/2005, à 20:59

BlindeKinder

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Encore un heureux (pour l'instant):
Ati Radeon 9600XT 256Mo

x@x:~$ glxgears -printfps
12995 frames in 5.0 seconds = 2598.893 FPS
12962 frames in 5.0 seconds = 2592.319 FPS
12962 frames in 5.0 seconds = 2592.278 FPS
12258 frames in 5.0 seconds = 2451.474 FPS
26694 frames in 5.0 seconds = 5338.796 FPS
29537 frames in 5.0 seconds = 5907.240 FPS
24802 frames in 5.0 seconds = 4960.162 FPS
14043 frames in 5.0 seconds = 2808.490 FPS
x@x:~$ fgl_glxgears
2369 frames in 6.0 seconds = 394.833 FPS
2071 frames in 5.0 seconds = 414.200 FPS
2207 frames in 5.0 seconds = 441.400 FPS
2604 frames in 5.0 seconds = 520.800 FPS
2618 frames in 5.0 seconds = 523.600 FPS
2617 frames in 5.0 seconds = 523.400 FPS
2621 frames in 5.0 seconds = 524.200 FPS
2612 frames in 5.0 seconds = 522.400 FPS
2522 frames in 5.0 seconds = 504.400 FPS

(ok, les 5000 c'est triche, la fenetre etait derriere le terminal)
Merci...

Mais il me reste mon probleme de clavier qui provient de mes premiers essais a installer le driver, si ca interesse quelqu'un, c'est ici que ca se passe

earth@universe:~$ sudo dpkg --force-remove-essential /usa/bill_gates.deb

Hors ligne

#314 Le 20/12/2005, à 12:38

zedtux

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Moi j'ai un portable ASUS ASUS A2DA28-RW, AMD Athlon XP Mobility 2800+ et une ATi Radeon Mobility 9600Pro 64Mo DDR SDRAM AGP 8x DAC Speed 400Mhz

glxgears -printfps
7628 frames in 5.0 seconds = 1525.538 FPS
8600 frames in 5.0 seconds = 1719.896 FPS
8601 frames in 5.0 seconds = 1720.074 FPS
8601 frames in 5.0 seconds = 1720.096 FPS
8601 frames in 5.0 seconds = 1720.104 FPS
8600 frames in 5.0 seconds = 1719.945 FPS
8600 frames in 5.0 seconds = 1719.830 FPS

fgl_glxgears
1456 frames in 5.0 seconds = 291.200 FPS
1757 frames in 5.0 seconds = 351.400 FPS
1752 frames in 5.0 seconds = 350.400 FPS
1750 frames in 5.0 seconds = 350.000 FPS
1749 frames in 5.0 seconds = 349.800 FPS

Driver ATi version 8.16.20

Voila smile

RECOLLER VOS FICHIERS XTM AVEC TUXTREMSPLIT !!
Adhérant April numéro 4985 [Rejoindre l'April moi aussi !].

Hors ligne

#315 Le 23/12/2005, à 09:43

CHUCKYCHUCK

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

vous savez s'il y a un gain de performance notable entre les drivers de base fournis avec la breezy, et les derniers publiés par ATI ??
merci

Dual Boot Win 7 Pro + Lucid Lynx
Asus G60JX 16'' - Core i5 430M 2.26 Ghz - 4 Go Ram - Geforce GTS 360 M 1GB

Hors ligne

#316 Le 27/12/2005, à 05:30

QuerMit

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Salut les copains

Bon voici le topo

Mobo = AMD266-d
CPU = AMD Athlon 2100+
Carte graphique = ATI 8500LE 128 MB
Mémoire = 512 MB Registered DDR

glxgears =
1400 frames in 5.2 seconds = 266.673 FPS
2100 frames in 5.2 seconds = 401.128 FPS
2240 frames in 5.5 seconds = 408.934 FPS
1820 frames in 5.1 seconds = 356.301 FPS
2240 frames in 5.3 seconds = 421.804 FPS
2240 frames in 5.2 seconds = 428.009 FPS

fgl_glxgears =
X Error of failed request:  BadMatch (invalid parameter attributes)
  Major opcode of failed request:  143 (GLX)
  Minor opcode of failed request:  5 (X_GLXMakeCurrent)
  Serial number of failed request:  32
  Current serial number in output stream:  32

lsmod | grep agp =
amd_k7_agp              8716  1
agpgart                34888  2 fglrx,amd_k7_agp

Si j'essais d'installer les drivers de ATI avec  l'installation graphique d'ATI tout est ok.
C'est après fglrxconf (tout les choix par défaut) et le reboot que je ne peut démarrer X.
L'erreur que je recois =
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
Fatal server error:
could not open default font 'fixed';
the X server's font paths might be misconfigured, remote font server(s)
may be unreachable, and/or local fonts may not be installed or are not
configured correctly.



Xorg d'origine modifier avec ce HOWTO

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
#   cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
#   sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
#   sudo dpkg-reconfigure xserver-xorg

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
        # paths to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
	Load	"GLcore"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
#	Load	"extmod"
    SubSection "extmod"
        Option    "omit xfree86-dga"
    EndSubSection
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"speedo"
	Load	"type1"
	Load	"v4l"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"ca(fr)"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. Radeon 8500 (R200 QL)"
	Driver		"fglrx"
	Option "UseInternalAGPGART" "no"
	BusID		"PCI:1:5:0"
EndSection

Section "Monitor"
	Identifier	"AOC Spectrum"
	Option		"DPMS"
	HorizSync	30-70
	VertRefresh	50-130
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. Radeon 8500 (R200 QL)"
	Monitor		"AOC Spectrum"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection

Voici le xorg.conf générer par fglrxconfig de ATI

# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.

# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"
# Ceci ajoute des modules présent dans le xorg.conf originale
	Load	"GLcore"
	Load	"bitmap"
	Load	"ddc"
	Load	"extmod"
	Load	"int10"
	Load	"record"
	Load	"speedo"
	Load	"v4l"
	Load	"vbe"
# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 

#    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option "Protocol"   "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"

#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"   "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"   "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"   "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"   "xfree86"
#    Option "XkbModel"   "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""

#    Option "XkbDisable"

    Option "XkbRules"	"xfree86"
    Option "XkbModel"	"pc105"
    Option "XkbLayout"	"ca"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier	"Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"   "9600"
#    Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "1412"
#    Option     "MaxX"           "15184"
#    Option     "MinY"           "15372"
#    Option     "MaxY"           "1230"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "231"
#    Option     "MaxX"           "3868"
#    Option     "MinY"           "3858"
#    Option     "MaxY"           "272"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonThreshold"    "17"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier  "Monitor0"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode 
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset     "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver      "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.

#    BusID       "PCI:0:10:0"

#    VideoRam    256

#    Clocks      25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "(null)" 
    Option "ScreenOverlap"              "0" 
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
    Option "CapabilitiesEx"             "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "2"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "yes"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:5:0"    # vendor=1002, device=514c
    Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

    Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###

En attendant de trouver une solution, Bonne Année 2006 à tous :-D
J'ai hâte d'essayer CEDEGA_DEMO

Dernière modification par QuerMit (Le 30/12/2005, à 21:46)

Hors ligne

#317 Le 02/01/2006, à 18:35

Chatmuel

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Hello ca marche meme sur un Pentium 3 733 MHz  smile

P3 733 384 Mo de RAM
Ati Radeon 9200 SE 128 DDR

chatmuel@Bastringue:~$ glxgears -printfps
5105 frames in 5.0 seconds = 1020.871 FPS
4312 frames in 5.0 seconds = 862.372 FPS
5166 frames in 5.0 seconds = 1033.141 FPS
4888 frames in 5.0 seconds = 977.560 FPS
5151 frames in 5.0 seconds = 1030.197 FPS
5152 frames in 5.0 seconds = 1030.307 FPS
4892 frames in 5.0 seconds = 978.159 FPS
3496 frames in 5.0 seconds = 699.155 FPS
chatmuel@Bastringue:~$ fgl_glxgears
662 frames in 5.0 seconds = 132.400 FPS
531 frames in 5.0 seconds = 106.200 FPS
687 frames in 5.0 seconds = 137.400 FPS

#318 Le 04/01/2006, à 22:31

M@Nu-SoLo

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

P4 3Ghz, 1Go DDR et X700 pro 128Mo

manu@MaNuX:~$ fgl_glxgears
Using GLX_SGIX_pbuffer
7150 frames in 5.0 seconds = 1430.000 FPS
7074 frames in 5.0 seconds = 1414.800 FPS
6695 frames in 5.0 seconds = 1339.000 FPS
7079 frames in 5.0 seconds = 1415.800 FPS
6747 frames in 5.0 seconds = 1349.400 FPS

manu@MaNuX:~$ glxgears -printfps
38286 frames in 5.0 seconds = 7657.139 FPS
40728 frames in 5.0 seconds = 8145.284 FPS
22072 frames in 5.0 seconds = 4414.354 FPS
29877 frames in 5.0 seconds = 5975.223 FPS
28199 frames in 5.0 seconds = 5639.664 FPS
29872 frames in 5.0 seconds = 5974.288 FPS
29802 frames in 5.0 seconds = 5960.272 FPS
36107 frames in 5.0 seconds = 7221.247 FPS

Hors ligne

#319 Le 05/01/2006, à 03:54

Gallenza

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Bonjour,
J'ai suivi tous les tutoriaux possibles pour réussir à installer les drivers fglrx sur mon Thinkpad X22 équipé d'une radeon mobility 9000 M6 et j'ai toujours échoué.
Quelqu'un a-t-il déjà réussi avec ce chip graphique?
Merci de votre aide.

#320 Le 08/01/2006, à 16:25

Luke

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Je me trompe peut-être, mais mes résultats me paraissent légèrement élevés pour ma config. Ils commencent faiblement puis montent... Ca me le faisait pas avant je crois.

Athlon 64 3000+
512 Mo
Ati Radeon 9800 Pro

clement:16:17:45:~$ glxgears
21369 frames in 5.0 seconds = 4273.760 FPS
34330 frames in 5.0 seconds = 6865.971 FPS
36772 frames in 5.0 seconds = 7354.397 FPS
36881 frames in 5.0 seconds = 7376.153 FPS
36980 frames in 5.0 seconds = 7395.990 FPS
36942 frames in 5.0 seconds = 7388.358 FPS

clement:16:19:04:~$ fgl_glxgears
3249 frames in 5.0 seconds = 649.800 FPS
5815 frames in 5.0 seconds = 1163.000 FPS
5816 frames in 5.0 seconds = 1163.200 FPS
5201 frames in 5.0 seconds = 1040.200 FPS
5417 frames in 5.0 seconds = 1083.400 FPS
5819 frames in 5.0 seconds = 1163.800 FPS

Hors ligne

#321 Le 08/01/2006, à 16:35

XioNoX

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Moblity radeon 9700

xionox@laptop:~$ glxgears -printfps
16249 frames in 5.0 seconds = 3249.796 FPS
31173 frames in 5.0 seconds = 6234.584 FPS
31766 frames in 5.0 seconds = 6353.112 FPS
32153 frames in 5.0 seconds = 6430.488 FPS
25338 frames in 5.0 seconds = 5067.493 FPS
27535 frames in 5.0 seconds = 5506.986 FPS
29933 frames in 5.0 seconds = 5986.577 FPS
29754 frames in 5.0 seconds = 5950.616 FPS
29993 frames in 5.0 seconds = 5998.451 FPS
30229 frames in 5.0 seconds = 6045.653 FPS
29995 frames in 5.0 seconds = 5998.956 FPS
30027 frames in 5.0 seconds = 6005.286 FPS
29850 frames in 5.0 seconds = 5969.994 FPS
30215 frames in 5.0 seconds = 6042.876 FPS
29913 frames in 5.0 seconds = 5982.422 FPS
30506 frames in 5.0 seconds = 6101.117 FPS
26381 frames in 5.0 seconds = 5275.819 FPS
xionox@laptop:~$ fgl_glxgears
Using GLX_SGIX_pbuffer
3658 frames in 5.0 seconds = 731.600 FPS
5372 frames in 5.0 seconds = 1074.400 FPS
5321 frames in 5.0 seconds = 1064.200 FPS
5209 frames in 5.0 seconds = 1041.800 FPS
5215 frames in 5.0 seconds = 1043.000 FPS
5180 frames in 5.0 seconds = 1036.000 FPS
4947 frames in 5.0 seconds = 989.400 FPS
4996 frames in 5.0 seconds = 999.200 FPS
4770 frames in 5.0 seconds = 954.000 FPS
4950 frames in 5.0 seconds = 990.000 FPS
5148 frames in 5.0 seconds = 1029.600 FPS
5325 frames in 5.0 seconds = 1065.000 FPS
5118 frames in 5.0 seconds = 1023.600 FPS
5212 frames in 5.0 seconds = 1042.400 FPS
4948 frames in 5.0 seconds = 989.600 FPS
xionox@laptop:~$

Hors ligne

#322 Le 08/01/2006, à 17:26

riri

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Luke a écrit :

Je me trompe peut-être, mais mes résultats me paraissent légèrement élevés pour ma config. Ils commencent faiblement puis montent... Ca me le faisait pas avant je crois.

Athlon 64 3000+
512 Mo
Ati Radeon 9800 Pro

Athlon 64 3500+ (socket 939)
512Mo 1 barrette Single Chanel (oui j'ai fait une bêtise à l'achat)
Ati Radeon 9800 Pro

Donc sensiblement la même config que toi. Avec d'autres trucs qui tournent et une image de fond, voilà ce que j'ai :

riri@chewie:~$ fgl_glxgears
3622 frames in 5.0 seconds = 724.400 FPS
4737 frames in 5.0 seconds = 947.400 FPS
4724 frames in 5.0 seconds = 944.800 FPS
4738 frames in 5.0 seconds = 947.600 FPS
4760 frames in 5.0 seconds = 952.000 FPS
4749 frames in 5.0 seconds = 949.800 FPS
4740 frames in 5.0 seconds = 948.000 FPS
4741 frames in 5.0 seconds = 948.200 FPS
5888 frames in 5.0 seconds = 1177.600 FPS
6576 frames in 5.0 seconds = 1315.200 FPS
6550 frames in 5.0 seconds = 1310.000 FPS
4819 frames in 5.0 seconds = 963.800 FPS

Quand ça a monté en puissance, c'est parce que j'ai mis une fenêtre devant celle de gears :-) (le dernier, 963,8, c'est quand j'ai repassé gears devant)

riri - tulkluteur avertit.
La liberté d'une personne s'arrête où commence celle des autres.

Hors ligne

#323 Le 12/01/2006, à 13:46

Daniel Moyne

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

moi aucun progrès avec la config suivante :
- AMD Athlon 64 3500+ (socket 939) sur carte mère AMD MSI K8N neo 4F,
- Carte video PCI-X ATI Radeon X300 SE.

Je n'ai même pas dans "/dev" un dossier "dri"

Est-ce pour ce dernier point un pb deconfiguration du BIOS car il me semble que pour la carte video on a l'option "PCI" et "PCI Express" à choisir.

Je suis en Ubuntu Breezy 64 bits mais je ne pense pas que le problème soit là !

Qui avec une config identique a réussi ?
Merci.

AMD 64 bits 1024 Mb DDR + ATI Radeon X300 (RV370) 128 Mb PCIE
K8N Neo4

Hors ligne

#324 Le 14/01/2006, à 01:41

Europeen

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Athlon 2000+
1go DDR
Ati Radeon 9800 Pro 128MB

kawada@ubuntu:~$ glxgears -printfps
18929 frames in 5.0 seconds = 3785.786 FPS
33178 frames in 5.0 seconds = 6635.496 FPS
35832 frames in 5.0 seconds = 7166.255 FPS
18806 frames in 5.3 seconds = 3524.079 FPS
24858 frames in 5.0 seconds = 4971.380 FPS
23156 frames in 5.0 seconds = 4631.109 FPS
29565 frames in 5.0 seconds = 5912.978 FPS
33949 frames in 5.0 seconds = 6789.770 FPS
34026 frames in 5.0 seconds = 6805.170 FPS
32243 frames in 5.0 seconds = 6448.521 FPS
35107 frames in 7.0 seconds = 4991.104 FPS
34412 frames in 5.0 seconds = 6882.325 FPS

kawada@ubuntu:~$ fgl_glxgears
3466 frames in 5.0 seconds = 693.200 FPS
3970 frames in 5.0 seconds = 794.000 FPS
3806 frames in 5.0 seconds = 761.200 FPS
4621 frames in 5.0 seconds = 924.200 FPS
5193 frames in 5.0 seconds = 1038.600 FPS
5528 frames in 5.0 seconds = 1105.600 FPS
4702 frames in 5.0 seconds = 940.400 FPS
5551 frames in 5.0 seconds = 1110.200 FPS
5628 frames in 5.0 seconds = 1125.600 FPS
4690 frames in 5.0 seconds = 938.000 FPS
5554 frames in 5.0 seconds = 1110.800 FPS

big_smile J'ai l'air con mais ca veut dire quoi ? big_smile  C'est bien ? C'est pas bien ?

La France Qui gagne avec http://www.claviceps.com   ::....._.....::

Hors ligne

#325 Le 30/01/2006, à 20:20

Muscardin

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

N'oublie pas de débrancher le cable tv de votre sortie tv wink

Pages : 1 … 11 12 13 14 15 … 48