#1926 Le 06/01/2008, à 08:50
- tania boréalis et dia
Re : [Clos] Centralisation Probleme Webcam+EasyCam
voici un script qui soit disant affiche la liste des signeaux
d'interruption disponibles mais il y'a des erreurs on n' a pas compris
#!/bin/sh
cat/usr/src/linux/include/asm/signal.h|grep"definSIG"|
awk'{print $2 " " $NF}'
voici le resultat
./script: line 2: cat/usr/src/linux/include/asm/signal.h: Aucun fichier ou répertoire de ce type
./script: line 2: grepdefinSIG: command not found
./script: line 3: awk{print $2 " " $NF}: command not found
on cherche une commande sous shell plus facile qu'on peut comprendre
#1927 Le 06/01/2008, à 13:34
- Kanor
Re : [Clos] Centralisation Probleme Webcam+EasyCam
tania boréalis et dia toi tu es vraiment à coté du sujet 
ouvre un nouveau topic
Sinon EASYCAM n'est pas à jour (mais la version mise à jour arrive deux trois bricole à corriger ... )
w33zer essaye avec ce tutot
http://doc.ubuntu-fr.org/logitech_quickcam
olazon toi c'est le tuto suivant
http://doc.ubuntu-fr.org/gspca_spca5xx
adrd donne le retour de lsusb
Hors ligne
#1928 Le 06/01/2008, à 15:28
- olazon
Re : [Clos] Centralisation Probleme Webcam+EasyCam
olazon toi c'est le tuto suivant
http://doc.ubuntu-fr.org/gspca_spca5xx
j'ai du faire ce qui est indiqué dans le tuto 4 ou 5 fois
mais toujours rien dans /dev/video
xawtv me renvoie
manu@manux:~$ xawtv
This is xawtv-3.95.dfsg.1, running on Linux/i686 (2.6.22-14-generic)
xinerama 0: 1280x800+0+0
can't open /dev/video0: No such file or directory
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: Aucun fichier ou répertoire de ce type
v4l2: open /dev/video0: Aucun fichier ou répertoire de ce type
v4l: open /dev/video0: Aucun fichier ou répertoire de ce type
no video grabber device available...si l'utopie est une chimère comme le dit le dictionnaire,
alors nous voulons des chimères partout sur la terre... (Les barbarins fourchus)
Hors ligne
#1929 Le 06/01/2008, à 15:35
- Kanor
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Pas de message d'erreur quand tu a lancé sudo ./gspca_build
Sinon est ce que tu a un tunner ?
Ah aussi débranche ta webcam rebranche et donne les derniére ligne de dmesg
Hors ligne
#1930 Le 06/01/2008, à 18:11
- olazon
Re : [Clos] Centralisation Probleme Webcam+EasyCam
pas de messages d'erreur
pas de tuner
dmesg=
[ 55.680000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 7029.676000] usb 5-1: new high speed USB device using ehci_hcd and address 3
[ 7029.836000] usb 5-1: configuration #1 chosen from 1 choice
[ 7134.128000] Linux video capture interface: v2.00
[ 7134.152000] usbcore: registered new interface driver gspca
[ 7134.152000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[19901.164000] usb 5-1: USB disconnect, address 3
[19904.216000] usb 5-1: new high speed USB device using ehci_hcd and address 4
[19904.376000] usb 5-1: configuration #1 chosen from 1 choice...si l'utopie est une chimère comme le dit le dictionnaire,
alors nous voulons des chimères partout sur la terre... (Les barbarins fourchus)
Hors ligne
#1931 Le 06/01/2008, à 18:42
- Kanor
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Donne le retour de
cd /dev/
ls -la | grep video
Hors ligne
#1932 Le 06/01/2008, à 18:48
- olazon
Re : [Clos] Centralisation Probleme Webcam+EasyCam
manu@manux:/dev$ ls -la | grep video
crw-rw---- 1 root video 10, 175 2008-01-06 12:37 agpgart
crw-rw---- 1 root video 195, 0 2008-01-06 12:38 nvidia0
crw-rw---- 1 root video 195, 255 2008-01-06 12:38 nvidiactl...si l'utopie est une chimère comme le dit le dictionnaire,
alors nous voulons des chimères partout sur la terre... (Les barbarins fourchus)
Hors ligne
#1933 Le 07/01/2008, à 20:04
- quick
Re : [Clos] Centralisation Probleme Webcam+EasyCam
hello
j'ai suivi ce tuto pour installer ma webcam :
http://doc.ubuntu-fr.org/gspca_spca5xx
et pas de webcam fonctionnelle (trust wp 1200)
j'ai installer easyspca mais ne fonctionne pas non plus.
fred@quick:/$ lsusb
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 005: ID 093a:2468 Pixart Imaging, Inc. Easy Snap Snake Eye WebCam
Bus 002 Device 004: ID 058f:9360 Alcor Micro Corp.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000fred@quick:/$ cd /dev
fred@quick:/dev$ ls -la | grep video
crw-rw---- 1 root video 195, 0 2008-01-07 19:07 nvidia0
crw-rw---- 1 root video 195, 255 2008-01-07 19:07 nvidiactl
drwxr-xr-x 2 root root 40 2008-01-07 19:26 video0
fred@quick:/dev$donc apparement la webcam est bien dedectée mais impossible de la faire fonctionné.
fred@quick:/$ lsmod
Module Size Used by
snd_rtctimer 4384 0
ov511 80160 0
ipv6 273892 8
af_packet 24840 2
binfmt_misc 12936 1
fglrx 656352 43
rfcomm 42136 2
l2cap 26240 11 rfcomm
bluetooth 57060 4 rfcomm,l2cap
ppdev 10244 0
powernow_k8 16960 0
cpufreq_stats 7232 0
cpufreq_conservative 8072 0
cpufreq_powersave 2688 0
cpufreq_userspace 5280 0
cpufreq_ondemand 9612 1
freq_table 5792 3 powernow_k8,cpufreq_stats,cpufreq_ondemand
ac 6148 0
container 5504 0
button 8976 0
video 18060 0
dock 10656 0
sbs 19592 0
battery 11012 0
sbp2 24072 0
lp 12580 0
snd_atiixp 21132 1
snd_ac97_codec 100644 1 snd_atiixp
ac97_bus 3200 1 snd_ac97_codec
snd_pcm_oss 44672 0
snd_mixer_oss 17664 1 snd_pcm_oss
snd_pcm 80388 3 snd_atiixp,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 4740 0
snd_seq_oss 33152 0
snd_seq_midi 9600 0
snd_rawmidi 25728 1 snd_seq_midi
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
snd_seq 53232 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
gspca 608336 0
videodev 29312 2 ov511,gspca
snd_timer 24324 3 snd_rtctimer,snd_pcm,snd_seq
snd_seq_device 9228 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
sg 36764 0
v4l2_common 18432 1 videodev
v4l1_compat 15364 1 videodev
serio_raw 8068 0
sd_mod 30336 0
parport_pc 37412 1
parport 37448 3 ppdev,lp,parport_pc
psmouse 39952 0
snd 54660 12 snd_atiixp,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 8800 1 snd
k8temp 6656 0
pcspkr 4224 0
snd_page_alloc 11400 2 snd_atiixp,snd_pcm
i2c_piix4 9740 0
ati_agp 10124 0
i2c_core 26112 1 i2c_piix4
agpgart 35016 2 fglrx,ati_agp
shpchp 34580 0
pci_hotplug 32704 1 shpchp
evdev 11136 3
ext3 133896 1
jbd 60456 1 ext3
mbcache 9732 1 ext3
ide_cd 32672 0
cdrom 37536 1 ide_cd
ide_disk 18560 3
8139too 27776 0
usb_storage 73024 0
libusual 18448 1 usb_storage
sata_sil 12168 0
ohci1394 36528 0
ieee1394 96312 2 sbp2,ohci1394
8139cp 25088 0
mii 6528 2 8139too,8139cp
atiixp 7056 0 [permanent]
ide_core 116804 4 ide_cd,ide_disk,usb_storage,atiixp
ehci_hcd 36492 0
ata_generic 8452 0
libata 125168 2 sata_sil,ata_generic
scsi_mod 147084 5 sbp2,sg,sd_mod,usb_storage,libata
ohci_hcd 22916 0
usbcore 138632 7 ov511,gspca,usb_storage,libusual,ehci_hcd,ohci_hcd
thermal 14344 0
processor 32072 2 powernow_k8,thermal
fan 5764 0
fuse 47124 1
apparmor 40728 0
commoncap 8320 1 apparmor
fred@quick:/$fred@quick:/$ dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 08:02:57 UTC 2007 (Ubuntu 2.6.22-14.47-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
[ 0.000000] BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 62MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f48c0
[ 0.000000] Entering add_active_range(0, 0, 245488) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 245488
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 245488
[ 0.000000] On node 0 totalpages: 245488
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 125 pages used for memmap
[ 0.000000] HighMem zone: 15987 pages, LIFO batch:3
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F87E0 checksum 0
[ 0.000000] ACPI: RSDP 000F87E0, 0014 (r0 HP-CPC)
[ 0.000000] ACPI: RSDT 3BEF3040, 0038 (r1 HP-CPC AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 3BEF30C0, 0084 (r2 HP-CPC AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 3BEF31C0, 3A20 (r1 HP-CPC AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3BEF0000, 0040
[ 0.000000] ACPI: SSDT 3BEF6D00, 00B5 (r1 HP-CPC POWERNOW 1 LTP 1)
[ 0.000000] ACPI: SRAT 3BEF6E00, 0090 (r1 HP-CPC HAMMER 1 AMD 1)
[ 0.000000] ACPI: MCFG 3BEF6F00, 003C (r1 HP-CPC AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 3BEF6C40, 0068 (r1 HP-CPC AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:15 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3bf00000:a4100000)
[ 0.000000] Built 1 zonelists. Total pages: 243571
[ 0.000000] Kernel command line: root=UUID=29356b76-fa17-4b5d-a9b5-1bd04ef67898 ro quiet splash locale=fr_FR
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1790.859 MHz processor.
[ 28.125348] Console: colour VGA+ 80x25
[ 28.125910] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 28.126847] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 28.148608] Memory: 961928k/981952k available (2015k kernel code, 19424k reserved, 916k data, 364k init, 64448k highmem)
[ 28.148619] virtual kernel memory layout:
[ 28.148620] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 28.148622] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 28.148623] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 28.148624] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 28.148626] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 28.148627] .data : 0xc02f7de6 - 0xc03dce84 ( 916 kB)
[ 28.148628] .text : 0xc0100000 - 0xc02f7de6 (2015 kB)
[ 28.148631] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 28.148673] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 28.228594] Calibrating delay using timer specific routine.. 3585.37 BogoMIPS (lpj=7170744)
[ 28.228625] Security Framework v1.0.0 initialized
[ 28.228634] SELinux: Disabled at boot.
[ 28.228648] Mount-cache hash table entries: 512
[ 28.228783] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[ 28.228792] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 28.228795] CPU: L2 Cache: 128K (64 bytes/line)
[ 28.228798] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[ 28.228808] Compat vDSO mapped to ffffe000.
[ 28.228821] Checking 'hlt' instruction... OK.
[ 28.244715] SMP alternatives: switching to UP code
[ 28.244959] Freeing SMP alternatives: 11k freed
[ 28.245283] Early unpacking initramfs... done
[ 28.568005] ACPI: Core revision 20070126
[ 28.568078] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 28.577110] CPU0: AMD Sempron(tm) Processor 3000+ stepping 00
[ 28.577131] Total of 1 processors activated (3585.37 BogoMIPS).
[ 28.577293] ENABLING IO-APIC IRQs
[ 28.577488] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 28.617162] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 28.617204] ...trying to set up timer (IRQ0) through the 8259A ... failed.
[ 28.617207] ...trying to set up timer as Virtual Wire IRQ... works.
[ 28.763922] Brought up 1 CPUs
[ 28.764027] Booting paravirtualized kernel on bare hardware
[ 28.764104] Time: 18:06:46 Date: 00/07/108
[ 28.764129] NET: Registered protocol family 16
[ 28.764223] EISA bus registered
[ 28.764239] ACPI: bus type pci registered
[ 28.799538] PCI: PCI BIOS revision 3.00 entry at 0xfac80, last bus=2
[ 28.799540] PCI: Using configuration type 1
[ 28.799542] Setting up standard PCI resources
[ 28.802431] ACPI: EC: Look up EC in DSDT
[ 28.805407] ACPI: Interpreter enabled
[ 28.805410] ACPI: (supports S0 S1 S3 S4 S5)
[ 28.805425] ACPI: Using IOAPIC for interrupt routing
[ 28.809614] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 28.809625] PCI: Probing PCI hardware (bus 00)
[ 28.810745] PCI: Transparent bridge - 0000:00:14.4
[ 28.810780] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 28.810944] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 28.811082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 28.824709] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 28.824799] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 28.824885] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 28.824971] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 28.825057] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11)
[ 28.825147] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11)
[ 28.825232] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11)
[ 28.825317] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 28.825412] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 28.825423] pnp: PnP ACPI init
[ 28.825438] ACPI: bus type pnp registered
[ 28.827642] pnp: PnP ACPI: found 12 devices
[ 28.827645] ACPI: ACPI bus type pnp unregistered
[ 28.827649] PnPBIOS: Disabled by ACPI PNP
[ 28.827698] PCI: Using ACPI for IRQ routing
[ 28.827701] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 28.827712] PCI: Cannot allocate resource region 3 of device 0000:00:00.0
[ 28.876003] NET: Registered protocol family 8
[ 28.876005] NET: Registered protocol family 20
[ 28.876085] pnp: 00:01: ioport range 0x228-0x22f has been reserved
[ 28.876088] pnp: 00:01: ioport range 0x40b-0x40b has been reserved
[ 28.876091] pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved
[ 28.876094] pnp: 00:01: ioport range 0xc00-0xc01 has been reserved
[ 28.876097] pnp: 00:01: ioport range 0xc14-0xc14 has been reserved
[ 28.876100] pnp: 00:01: ioport range 0xc50-0xc52 has been reserved
[ 28.876103] pnp: 00:01: ioport range 0xc6c-0xc6d has been reserved
[ 28.876106] pnp: 00:01: ioport range 0xc6f-0xc6f has been reserved
[ 28.876120] pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
[ 28.876128] pnp: 00:0b: iomem range 0xcd000-0xcffff has been reserved
[ 28.876131] pnp: 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
[ 28.876134] pnp: 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
[ 28.876137] pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved
[ 28.879739] Time: tsc clocksource has been installed.
[ 28.906363] PCI: Bridge: 0000:00:01.0
[ 28.906366] IO window: e000-efff
[ 28.906370] MEM window: fdd00000-fddfffff
[ 28.906372] PREFETCH window: d8000000-dfffffff
[ 28.906377] PCI: Bridge: 0000:00:14.4
[ 28.906380] IO window: d000-dfff
[ 28.906386] MEM window: fdc00000-fdcfffff
[ 28.906392] PREFETCH window: fde00000-fdefffff
[ 28.906423] NET: Registered protocol family 2
[ 28.943696] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 28.943841] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 28.945686] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 28.946333] TCP: Hash tables configured (established 131072 bind 65536)
[ 28.946337] TCP reno registered
[ 28.955772] checking if image is initramfs... it is
[ 29.407039] Switched to high resolution mode on CPU 0
[ 29.587924] Freeing initrd memory: 7065k freed
[ 29.588285] audit: initializing netlink socket (disabled)
[ 29.588300] audit(1199729206.088:1): initialized
[ 29.588362] highmem bounce pool size: 64 pages
[ 29.589965] VFS: Disk quotas dquot_6.5.1
[ 29.590012] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 29.590109] io scheduler noop registered
[ 29.590111] io scheduler anticipatory registered
[ 29.590113] io scheduler deadline registered
[ 29.590129] io scheduler cfq registered (default)
[ 29.590140] PCI: MSI quirk detected. MSI deactivated.
[ 29.590180] Boot video device is 0000:01:05.0
[ 29.590330] isapnp: Scanning for PnP cards...
[ 29.944228] isapnp: No Plug & Play device found
[ 29.990021] Real Time Clock Driver v1.12ac
[ 29.990106] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 29.991680] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 29.991888] input: Macintosh mouse button emulation as /class/input/input0
[ 29.991960] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 29.995445] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 29.995452] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 29.995635] mice: PS/2 mouse device common for all mice
[ 29.995739] EISA: Probing bus 0 at eisa.0
[ 29.995762] Cannot allocate resource for EISA slot 4
[ 29.995782] EISA: Detected 0 cards.
[ 29.995878] TCP cubic registered
[ 29.995891] NET: Registered protocol family 1
[ 29.995915] Using IPI No-Shortcut mode
[ 29.996100] Magic number: 8:467:139
[ 29.996223] hash matches device device:10
[ 29.996578] Freeing unused kernel memory: 364k freed
[ 30.034126] input: AT Translated Set 2 keyboard as /class/input/input1
[ 31.257944] AppArmor: AppArmor initialized<5>audit(1199729207.588:2): type=1505 info="AppArmor initialized" pid=1196
[ 31.267564] fuse init (API version 7.8)
[ 31.274455] Failure registering capabilities with primary security module.
[ 31.295517] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 31.295530] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 32.012105] usbcore: registered new interface driver usbfs
[ 32.012127] usbcore: registered new interface driver hub
[ 32.012145] usbcore: registered new device driver usb
[ 32.012902] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 32.012942] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 16
[ 32.012956] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 32.013159] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 32.013181] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 32.030440] SCSI subsystem initialized
[ 32.035123] libata version 2.21 loaded.
[ 32.073360] usb usb1: configuration #1 chosen from 1 choice
[ 32.073390] hub 1-0:1.0: USB hub found
[ 32.073403] hub 1-0:1.0: 4 ports detected
[ 32.094831] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 32.094837] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 32.151077] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 32.175152] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 16
[ 32.175168] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 32.175191] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 32.175208] ohci_hcd 0000:00:13.1: irq 16, io mem 0xfe02d000
[ 32.235034] usb usb2: configuration #1 chosen from 1 choice
[ 32.235060] hub 2-0:1.0: USB hub found
[ 32.235074] hub 2-0:1.0: 4 ports detected
[ 32.341676] sata_sil 0000:00:12.0: version 2.2
[ 32.341731] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 17
[ 32.341825] scsi0 : sata_sil
[ 32.349657] scsi1 : sata_sil
[ 32.349780] ata1: SATA max UDMA/100 cmd 0xf8852080 ctl 0xf885208a bmdma 0xf8852000 irq 17
[ 32.349786] ata2: SATA max UDMA/100 cmd 0xf88520c0 ctl 0xf88520ca bmdma 0xf8852008 irq 17
[ 32.642304] usb 2-3: new full speed USB device using ohci_hcd and address 2
[ 32.658287] ata1: SATA link down (SStatus 0 SControl 300)
[ 32.850184] usb 2-3: configuration #1 chosen from 1 choice
[ 32.969834] ata2: SATA link down (SStatus 0 SControl 300)
[ 32.970008] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 16
[ 32.970022] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 32.970057] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 32.970117] ehci_hcd 0000:00:13.2: irq 16, io mem 0xfe02c000
[ 32.970129] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 32.970248] usb usb3: configuration #1 chosen from 1 choice
[ 32.970274] hub 3-0:1.0: USB hub found
[ 32.970282] hub 3-0:1.0: 8 ports detected
[ 33.073894] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 33.073918] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
[ 33.073929] ATIIXP: chipset revision 0
[ 33.073931] ATIIXP: not 100% native mode: will probe irqs later
[ 33.073941] ide0: BM-DMA at 0xf800-0xf807, BIOS settings: hda:pio, hdb:pio
[ 33.073956] ide1: BM-DMA at 0xf808-0xf80f, BIOS settings: hdc:pio, hdd:pio
[ 33.073967] Probing IDE interface ide0...
[ 33.105699] usb 2-3: USB disconnect, address 2
[ 33.361693] hda: ST340014A, ATA DISK drive
[ 33.641276] hdb: ST3160021A, ATA DISK drive
[ 33.696793] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
[ 33.696796] hda: selected mode 0x42
[ 33.697155] hdb: host side 80-wire cable detection failed, limiting max speed to UDMA33
[ 33.697158] hdb: selected mode 0x42
[ 33.697550] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 33.705641] Probing IDE interface ide1...
[ 34.016314] usb 2-3: new full speed USB device using ohci_hcd and address 3
[ 34.223257] usb 2-3: configuration #1 chosen from 1 choice
[ 34.440150] hdc: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
[ 34.527589] usb 2-4: new full speed USB device using ohci_hcd and address 4
[ 34.736533] usb 2-4: configuration #1 chosen from 1 choice
[ 34.750740] usbcore: registered new interface driver libusual
[ 34.755885] Initializing USB Mass Storage driver...
[ 34.755959] scsi2 : SCSI emulation for USB Mass Storage devices
[ 34.756000] usb-storage: device found at 4
[ 34.756002] usb-storage: waiting for device to settle before scanning
[ 34.756015] usbcore: registered new interface driver usb-storage
[ 34.756018] USB Mass Storage support registered.
[ 35.110753] hdc: selected mode 0x42
[ 35.110935] ide1 at 0x170-0x177,0x376 on irq 15
[ 35.112970] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 35.112975] 8139cp 0000:02:03.0: Try the "8139too" driver instead.
[ 35.114568] 8139too Fast Ethernet driver 0.9.28
[ 35.114628] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 35.115301] eth0: RealTek RTL8139 at 0xf883e000, 00:13:d3:0f:52:7b, IRQ 19
[ 35.115304] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 35.115434] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 35.168255] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fdcfd000-fdcfd7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 35.182395] hda: max request size: 512KiB
[ 35.195422] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33)
[ 35.195844] hda: cache flushes supported
[ 35.195890] hda: hda1 hda2 < hda5 >
[ 35.236153] hdb: max request size: 512KiB
[ 35.236159] hdb: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(33)
[ 35.236548] hdb: cache flushes supported
[ 35.236578] hdb: hdb1 hdb2 < hdb5 >
[ 35.278707] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 35.278718] Uniform CD-ROM driver Revision: 3.20
[ 35.780810] Attempting manual resume
[ 35.780813] swsusp: Resume From Partition 3:5
[ 35.780815] PM: Checking swsusp image.
[ 35.781391] PM: Resume from disk failed.
[ 35.809226] kjournald starting. Commit interval 5 seconds
[ 35.809240] EXT3-fs: mounted filesystem with ordered data mode.
[ 36.440933] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000a8c5c4]
[ 39.748429] usb-storage: device scan complete
[ 39.754413] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 39.760415] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 39.766387] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 39.772380] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 43.961761] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 43.986869] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 44.059155] Linux agpgart interface v0.102 (c) Dave Jones
[ 44.127833] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 45.068741] input: PC Speaker as /class/input/input2
[ 45.370777] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 45.382328] sd 2:0:0:1: [sdb] Attached SCSI removable disk
[ 45.391568] sd 2:0:0:2: [sdc] Attached SCSI removable disk
[ 45.401552] sd 2:0:0:3: [sdd] Attached SCSI removable disk
[ 45.453432] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 45.453464] sd 2:0:0:1: Attached scsi generic sg1 type 0
[ 45.453492] sd 2:0:0:2: Attached scsi generic sg2 type 0
[ 45.453523] sd 2:0:0:3: Attached scsi generic sg3 type 0
[ 45.496805] logips2pp: Detected unknown logitech mouse model 26
[ 45.521646] Linux video capture interface: v2.00
[ 45.681151] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found. (PAC207)
[ 45.688622] usbcore: registered new interface driver gspca
[ 45.688628] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[ 45.965168] ACPI: PCI Interrupt 0000:00:14.5[b] -> GSI 17 (level, low) -> IRQ 20
[ 45.974410] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input3
[ 45.980049] parport_pc 00:07: reported by Plug and Play ACPI
[ 45.980096] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 47.143956] lp0: using parport0 (interrupt-driven).
[ 47.253849] Adding 1646620k swap on /dev/hda5. Priority:-1 extents:1 across:1646620k
[ 47.563785] EXT3 FS on hda1, internal journal
[ 48.727740] No dock devices found.
[ 48.820998] input: Power Button (FF) as /class/input/input4
[ 48.825400] ACPI: Power Button (FF) [PWRF]
[ 48.865083] input: Power Button (CM) as /class/input/input5
[ 48.869413] ACPI: Power Button (CM) [PWRB]
[ 49.161268] powernow-k8: Found 1 AMD Sempron(tm) Processor 3000+ processors (version 2.00.00)
[ 49.161301] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6
[ 49.161304] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12
[ 50.434491] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 50.441406] ppdev: user-space parallel port driver
[ 50.725573] audit(1199729228.324:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4823 profile="/usr/sbin/cupsd"
[ 50.794898] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 50.794903] apm: overridden by ACPI.
[ 50.996840] Failure registering capabilities with primary security module.
[ 51.201669] Bluetooth: Core ver 2.11
[ 51.201777] NET: Registered protocol family 31
[ 51.201780] Bluetooth: HCI device and connection manager initialized
[ 51.201783] Bluetooth: HCI socket layer initialized
[ 51.224967] Bluetooth: L2CAP ver 2.8
[ 51.224971] Bluetooth: L2CAP socket layer initialized
[ 51.360257] Bluetooth: RFCOMM socket layer initialized
[ 51.360340] Bluetooth: RFCOMM TTY layer initialized
[ 51.360343] Bluetooth: RFCOMM ver 1.8
[ 24.460000] Marking TSC unstable due to: cpufreq changes.
[ 24.464000] Time: acpi_pm clocksource has been installed.
[ 24.612000] Clocksource tsc unstable (delta = -67578225 ns)
[ 24.984000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 24.988000] [fglrx] Maximum main memory to use for locked dma buffers: 865 MBytes.
[ 24.988000] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0
[ 25.004000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 20
[ 25.768000] [fglrx] total GART = 130023424
[ 25.768000] [fglrx] free GART = 114032640
[ 25.768000] [fglrx] max single GART = 114032640
[ 25.768000] [fglrx] total LFB = 67108864
[ 25.768000] [fglrx] free LFB = 49278976
[ 25.768000] [fglrx] max single LFB = 49278976
[ 25.768000] [fglrx] total Inv = 0
[ 25.768000] [fglrx] free Inv = 0
[ 25.768000] [fglrx] max single Inv = 0
[ 25.768000] [fglrx] total TIM = 0
[ 27.440000] NET: Registered protocol family 17
[ 31.780000] NET: Registered protocol family 10
[ 31.780000] lo: Disabled Privacy Extensions
[ 42.084000] eth0: no IPv6 routers present
[ 411.908000] usbcore: registered new interface driver ov511
[ 411.908000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/ov511/ov511.c: v1.64 for Linux 2.5 : ov511 USB Camera Driver
[ 467.260000] usb 2-3: USB disconnect, address 3
[ 512.052000] hdc: tray open
[ 512.052000] end_request: I/O error, dev hdc, sector 0
[ 512.052000] Buffer I/O error on device hdc, logical block 0
[ 512.052000] Buffer I/O error on device hdc, logical block 1
[ 512.052000] Buffer I/O error on device hdc, logical block 2
[ 512.052000] Buffer I/O error on device hdc, logical block 3
[ 512.052000] Buffer I/O error on device hdc, logical block 4
[ 512.052000] Buffer I/O error on device hdc, logical block 5
[ 512.052000] Buffer I/O error on device hdc, logical block 6
[ 512.052000] Buffer I/O error on device hdc, logical block 7
[ 512.052000] hdc: tray open
[ 512.052000] end_request: I/O error, dev hdc, sector 0
[ 512.052000] Buffer I/O error on device hdc, logical block 0
[ 512.052000] hdc: tray open
[ 512.056000] end_request: I/O error, dev hdc, sector 4
[ 512.056000] Buffer I/O error on device hdc, logical block 1
[ 3021.864000] usb 2-3: new full speed USB device using ohci_hcd and address 5
[ 3022.072000] usb 2-3: configuration #1 chosen from 1 choice
[ 3022.072000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found. (PAC207)
fred@quick:/$donc j'espere trouvé une solution ici 
merci
Dernière modification par quick (Le 07/01/2008, à 20:06)
Hors ligne
#1934 Le 07/01/2008, à 20:48
- yamo
Re : [Clos] Centralisation Probleme Webcam+EasyCam
quick a écrit :
drwxr-xr-x 2 root root 40 2008-01-07 19:26 video0
ça me semble bizarre comme droits.
SI tu arrives à lancer xawtv en root : "sudo xawtv" c'est que tu as des problèmes de droits.
Sur ce pc j'ai :
ls -al /dev/video0
crw-rw---- 1 root video 81, 0 2008-01-02 20:34 /dev/video0Je ne sais pas ce que "c" veut dire mais ici ça fonctionne et je fait parti du groupe video (sinon je n'aurai pas le droit d'utiliser ma webcam).
Sur un autre PC j'ai du faire un chmod 666 pour que xawtv accède à la webcam!
Stéphane
--
Debian 9 XFCE Xubuntu 16.04.2 - #ubuntu sur freenode
sudo / matrix
Hors ligne
#1935 Le 08/01/2008, à 09:06
- quick
Re : [Clos] Centralisation Probleme Webcam+EasyCam
bon le probleme vient apparement du fait que je n'ais pas de /dev/video0 
fred@quick:/$ xawtv
This is xawtv-3.95.dfsg.1, running on Linux/i686 (2.6.22-14-generic)
WARNING: Your X-Server has no DGA support.
can't open /dev/video0: No such file or directory
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: Aucun fichier ou répertoire de ce type
v4l2: open /dev/video0: Aucun fichier ou répertoire de ce type
v4l: open /dev/video0: Aucun fichier ou répertoire de ce type
no video grabber device availableHors ligne
#1936 Le 12/01/2008, à 01:32
- rsb
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Forum address : http://forum.ubuntu-fr.org/viewtopic.php?id=16670
Email address : jbtheou@gmail.com
Please forward me the following text to one of following addresses :
ID 0546:3191 Polaroid Corp.
#1937 Le 13/01/2008, à 08:13
- Jonathan Métillon
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Bonjour,
J'utilise Ubuntu 7.10 Desktop sur un Sony Vaio VGN-TX3XP. J'ai une Creative WebCam NX Ultra.
J'ai installé le paquet easycam2 depuis le dépà´t http://blognux.free.fr, puis j'ai exécuté la commande sudo apt-get install linux-headers-`uname -r` et j'ai lancé lauchcam2 depuis un terminal.
Easycam se lance, et la webcam est détectée :
Bus 005 Device 008: ID 041e:401d Creative Technology, Ltd WebCam NX Ultra
Lorsque je clique "Starting installation" j'ai une fenêtre log qui s'ouvre avec "L'installation à échouer" et le résultat suivant dans le terminal :
$ lauchcam2
Reading package lists... Done
Building dependency tree
Reading state information... Done
linux-headers-2.6.22-14-generic is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
rm -r -f drivers/usb/*.o drivers/usb/.spcadecoder.o.cmd \
drivers/usb/.spca5xx.o.cmd *.o *.ko *.mod.* .[a-z]* core *.i
mkdir -p /lib/modules/2.6.22-14-generic/kernel/drivers/usb/media/
rm -f /lib/modules/2.6.22-14-generic/kernel/drivers/usb/media/spca50x.ko
rm -f /lib/modules/2.6.22-14-generic/kernel/drivers/usb/media/et61x.ko
install -c -m 0644 spca5xx.ko /lib/modules/2.6.22-14-generic/kernel/drivers/usb/media/
install: cannot stat `spca5xx.ko': No such file or directory
make: *** [install] Error 1Je vais essayer Easycam (le premier).
Hors ligne
#1938 Le 13/01/2008, à 08:16
- Jonathan Métillon
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Lors de la suppression du paquet easycam2 j'ai eu les erreurs suivantes :
Removing easycam2 ...
dpkg - warning: while removing easycam2, directory `/usr/share/EasyCam2/drivers/spca/drivers/usb' not empty so not removed.
dpkg - warning: while removing easycam2, directory `/usr/share/EasyCam2/drivers/spca/drivers' not empty so not removed.
dpkg - warning: while removing easycam2, directory `/usr/share/EasyCam2/drivers/spca' not empty so not removed.
dpkg - warning: while removing easycam2, directory `/usr/share/EasyCam2/drivers' not empty so not removed.
dpkg - warning: while removing easycam2, directory `/usr/share/EasyCam2' not empty so not removed.J'ai donc supprimé manuellement le répertoire :
sudo rm -rf /usr/share/EasyCam2
Hors ligne
#1939 Le 13/01/2008, à 08:18
- Jonathan Métillon
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Je viens d'installer et lancer easycam, premier du nom :
$ lauchcam
creating symbolic link `/dev/video' to `/dev/video0': File exists
--08:17:04-- http://blognux.free.fr/Liste/spca
=> `spca'
Resolving blognux.free.fr... ID 041e:401d Creative Technology, Ltd WebCam NX Ultra
gspca 608336 0
videodev 29312 1 gspca
usbcore 138632 8 gspca,hci_usb,usbhid,usb_storage,libusual,ehci_hcd,uhci_hcd
rm -r -f drivers/usb/*.o drivers/usb/.spcadecoder.o.cmd \
drivers/usb/.spca5xx.o.cmd *.o *.ko *.mod.* .[a-z]* core *.i
Building SPCA5XX driver for 2.5/2.6 kernel.
Remember: you must have read/write access to your kernel source tree.
make -C /lib/modules/`uname -r`/build SUBDIRS=/usr/share/EasyCam/Spca/spca5xx-20051212 CC=cc modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.22-14-generic'
CC [M] /usr/share/EasyCam/Spca/spca5xx-20051212/drivers/usb/spca5xx.o
make[1]: Leaving directory `/usr/src/linux-headers-2.6.22-14-generic'à‡a semble s'être mieux passé ?
Hors ligne
#1940 Le 13/01/2008, à 08:20
- Jonathan Métillon
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Ah ben. Je ne sais pas si c'est dû à easycam, mais je ne peux plus lancer Skype ! (Version 2.0.0.27 -- Beta pour Linux).
skype
terminate called after throwing an instance of 'Skype::Exceptions::GetObjectError'
what(): CallMember
Aborted (core dumped)Dernière modification par Jonathan Métillon (Le 13/01/2008, à 08:21)
Hors ligne
#1941 Le 13/01/2008, à 08:29
- Jonathan Métillon
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Ok à ce moment je n'ai personne pour tester le chat vidéo mais dans aMSN, dans l'Audio and Video assistant j'ai bien ma vidéo en preview. Pour l'instant c'est un succès donc ;-)
Cela dit comme je l'avais posté ici, c'est après, lorsque j'essaye de faire un chat vidéo, que ça ne fonctionne pas. Je posterai le résultat dès que j'aurai trouvé un(e) cobaye :-)
Hors ligne
#1942 Le 13/01/2008, à 08:43
- Jonathan Métillon
Re : [Clos] Centralisation Probleme Webcam+EasyCam
A propos de mon problème avec Skype, comme indiqué ici dans le message de sidders, supprimer le répertoire ~/.Skype permet de reconfigurer son compte et régler le problème du crash au démarrage.
Hors ligne
#1943 Le 13/01/2008, à 10:02
- Jonathan Métillon
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Ok j'ai testé sous Skype 2 et sous aMSN et c'est toujours pareil : la fenêtre vidéo reste bleue ou noire et rien ne se passe.
Sous Skype le CPU s'emballe même à 100% jusqu'à ce que j'arrête la vidéo.
Pour aMSN j'ai bien forwardé les ports 6891 et 1863 depuis mon routeur vers ma machine.
A noter que sous aMSN dans l'Audio and Video assistant, quand j'arrive sur la page Step 1 la fenêtre vidéo reste bleue, avec la mention Preview:/dev/video0:0 qui s'affiche une seconde. Je fais Next et sur la Step 2 c'est pareil, bleue encore. Mais si à ce moment je fais Back cette fois dans la Step 1 la vidéo va s'afficher !
Une idée ?
Dernière modification par Jonathan Métillon (Le 13/01/2008, à 10:07)
Hors ligne
#1944 Le 13/01/2008, à 10:20
- Jonathan Métillon
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Je crois que je vais revendre ma NX Ultra sur eBay.
Quelle webcam me conseillez-vous qui soit absolument compatible avec Ubuntu, idéalement sans aucune configuration, et à un prix honnête bien sûr ?
Hors ligne
#1945 Le 14/01/2008, à 12:12
- galenskap
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Bonjour !
J'ai un problème : j'ai installé easycam2, mais il n'est pas dans le menu Système > Administration (ni dans les autres menus d'ailleurs)
Il est pourtant bien installé :
$ sudo apt-get install easycam2
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
easycam2 est déjà la plus récente version disponible.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.Quelqu'un peut m'aider ?
PS : au passage, lsusb me donne "Bus 007 Device 003: ID 04f2:b015 Chicony Electronics Co., Ltd ", est-ce que cette webcam sera reconnue avec easycam2 ou je fais fausse route ?
"In a world without walls and fences, who needs windows and gates ?"
Stop Monsanto
Hors ligne
#1946 Le 14/01/2008, à 21:33
- adrd
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Bus 007 Device 001: ID 0000:0000
Bus 008 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 005 Device 004: ID 099a:610c Zippy Technology Corp. EL-610 Super Mini Electron luminescent Keyboard
Bus 005 Device 005: ID 046d:c501 Logitech, Inc. Cordless Mouse Receiver
Bus 005 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 006 Device 006: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter
Bus 006 Device 007: ID 04b8:0103 Seiko Epson Corp. Perfection 610
Bus 006 Device 005: ID 046d:08b5 Logitech, Inc.
Bus 006 Device 004: ID 05e3:0604 Genesys Logic, Inc. USB 1.1 Hub
Bus 006 Device 001: ID 0000:0000Je suppose que c'est la ligne là qui t'intéresse Kanor :
Bus 006 Device 005: ID 046d:08b5 Logitech, Inc.
Hors ligne
#1947 Le 16/01/2008, à 11:01
- Serj Tiutiun
Re : [Clos] Centralisation Probleme Webcam+EasyCam
ID 0ac8:303b Z-Star Microelectronics Corp. ZC0303 WebCam
#1948 Le 16/01/2008, à 11:34
- Kanor
Re : [Clos] Centralisation Probleme Webcam+EasyCam
olazon Bizarre ton probléme le driver est bien installé d'aprés dmesg mais il n'y a pas de périphérie video de crée
est ce que tu peux donner les message aprés sudo ./gspca_build ?
quick elle devrait marcher avec ce tuto http://doc.ubuntu-fr.org/gspca_spca5xx
on voit bien la périphérie
drwxr-xr-x 2 root root 40 2008-01-07 19:26 video0
plus le bon message
usb 2-3: new full speed USB device using ohci_hcd and address 5
[ 3022.072000] usb 2-3: configuration #1 chosen from 1 choice
[ 3022.072000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found. (PAC207)
Tu a essayé avec quel logiciel pour téster ta webcam ?
Essaye la méthode de yamo
sudo xawtv
rsb Hi you must use the driver gspca_spca5xx
Jonathan Métillon utilise ce tuto http://doc.ubuntu-fr.org/gspca_spca5xx EASYCAM n'est pas à JOUR
galenskap regarde sur cette page
http://openfacts.berlios.de/index-en.phtml?title=Linux+UVC
adrd je ne sais pas la ??
Serj Tiutiun regarde ce tuto http://doc.ubuntu-fr.org/gspca_spca5xx
Hors ligne
#1949 Le 16/01/2008, à 11:57
- olazon
Re : [Clos] Centralisation Probleme Webcam+EasyCam
manu@manux:~/src/gspcav1-20071224$ sudo ./gspca_build
[sudo] password for manu:
REMOVE the old module if present
CLEAN gspca source tree
rm -r -f *.o decoder/.gspcadecoder.o.cmd decoder/*.o \
.gspca.o.cmd *.o *.ko *.mod.* .[a-z]* core *.i \
*.symvers *.err
COMPILE gspca Please Wait ....!!
INSTALL gspca in the kernel binary tree
mkdir -p /lib/modules/`uname -r`/kernel/drivers/usb/media/
rm -f /lib/modules/`uname -r`/kernel/drivers/usb/media/spca5xx.ko
rm -f /lib/modules/`uname -r`/kernel/drivers/media/video/gspca.ko
install -c -m 0644 gspca.ko /lib/modules/`uname -r`/kernel/drivers/usb/media/
/sbin/depmod -ae
LOAD gspca in memory
PRINT COMPILATION MESSAGES if ERRORS look kgspca.err
make -C /lib/modules/`uname -r`/build SUBDIRS=/home/manu/src/gspcav1-20071224 CC=cc modules
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.22-14-generic »
CC [M] /home/manu/src/gspcav1-20071224/gspca_core.o
CC [M] /home/manu/src/gspcav1-20071224/decoder/gspcadecoder.o
LD [M] /home/manu/src/gspcav1-20071224/gspca.o
Building modules, stage 2.
MODPOST 1 modules
CC /home/manu/src/gspcav1-20071224/gspca.mod.o
LD [M] /home/manu/src/gspcav1-20071224/gspca.ko
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.22-14-generic »...si l'utopie est une chimère comme le dit le dictionnaire,
alors nous voulons des chimères partout sur la terre... (Les barbarins fourchus)
Hors ligne
#1950 Le 17/01/2008, à 18:29
- Eden6371
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Bonjour,
J'ai une webcam Microsoft Lifecam VX-6000 et ubuntu refuse de l'utiliser. En faisant un lsusb, je vois bien la webcam mais c'est tout.
Je vois sur internet que celle ci pose beaucoup de problèmes mais y a-t-il quant même un moyen de pouvoir la faire fonctionner? Une webcam à 100 euros, j'apprécierai de pouvoir l'utiliser sans devoir rebooter sous windaube.
A default, si je pouvais, au moins, faire fonctionner le micro intégré.....ça serait cool....:P
Merci la compagnie. 
Hors ligne