#176 Le 15/08/2013, à 14:37
- spinoziste
Re : A quoi ressemble votre environnement -- Printemps/été 2013
J'ai déjà vu ce spectrum3d mais le top serait que ce soit intégré dans le bureau sans cadre comme un conky. Je vais poster pour voir ce qu'en pense Didier T, le spécialiste conky maison.
Je plussoie .
@golgot : Classe !
Nous mourrons tous .
Hors ligne
#177 Le 15/08/2013, à 15:21
- Compte anonymisé
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Je vais poster pour voir ce qu'en pense Didier T
Je crois que sur le post en question la demande ai déjà été posée
Dernière modification par Compte anonymisé (Le 15/08/2013, à 15:22)
#178 Le 16/08/2013, à 08:39
- F50
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Je crois que sur le post en question la demande ai déjà été posée
Où est le poste et quelle est la réponse?
#179 Le 16/08/2013, à 11:24
- Compte anonymisé
Re : A quoi ressemble votre environnement -- Printemps/été 2013
@fcn50
Bonjour,
http://forum.ubuntu-fr.org/viewtopic.php?id=1231521&p=5
Tiens si tu es sous Gnome, peut-être que ça pourrait faire :
http://impulse.ian-halpern.com/
http://gnome-look.org/content/show.php/?content=99383
Pour moi, trop de merde à rajouter (KDE)
Dernière modification par Compte anonymisé (Le 16/08/2013, à 11:32)
#180 Le 16/08/2013, à 18:57
- Phlox
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Bon, allez, je suis à fond dans les captures d'écrans en ce moment !
Donc ça, c'est mon Thinkpad T61p qui me suit presque partout, pas de grosses différences par rapport à l'autre, sauf que ce n'est plus Debian mais Xubuntu 12.04 et Xfce 4.10.
Dernière modification par tsagobar (Le 16/08/2013, à 21:33)
Hors ligne
#181 Le 16/08/2013, à 20:10
- jean4111
Re : A quoi ressemble votre environnement -- Printemps/été 2013
tsagobar, comment a tu installé la barrre de droite ? ca m'interesse bien d'avoir toutes ses infos a disposition
Dernière modification par jean4111 (Le 16/08/2013, à 20:10)
Samuel - Angers
HDD SATA 1 TB + 160GB + 80GB
Hors ligne
#182 Le 16/08/2013, à 20:41
- Phlox
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Salut jean4111,
C'est un petit logiciel qui s'appelle conky, faut d'abord installer le paquet conky-all. Ensuite tu crées un fichier .conkyrc que tu places dans ton home (pour le mien il y a en plus un script lua pour afficher les barres vertes). Tu trouveras plein d'exemples sur ce topic.
Je te laisse le mien pour te donner une idée (en sachant qu'il faudra le modifier pour qu'il fonctionne sur ton ordi) :
###### ####### ## ## ## ## ## ## ######## ###### ### ###### ####### ######## ### ########
## ## ## ## ### ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
## ## ## #### ## ## ## #### ## ## ## ## ## ## ## ## ## ## ## ## ##
## ## ## ## ## ## ##### ## ## ###### ## ## ## #### ## ## ######## ## ## ########
## ## ## ## #### ## ## ## ## ## ######### ## ## ## ## ## ## ######### ## ##
## ## ## ## ## ### ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
###### ####### ## ## ## ## ## ## ###### ## ## ###### ####### ######## ## ## ## ##
background yes #Pour que conky tourne en arrière plan ; no = pour les tests
update_interval 1
total_run_times 0 #Temps en secondes ; 0 = toujours actif
cpu_avg_samples 2 #Nb d'échantillons pour calculer la moyenne d'utilisation CPU
net_avg_samples 2
override_utf8_locale yes
double_buffer yes
no_buffers yes
text_buffer_size 2048
#imlib_cache_size 0
# Window specifications #
own_window yes
own_window_transparent yes
own_window_argb_value 0
own_window_argb_visual yes
own_window_type desktop
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
border_inner_margin 0
border_outer_margin 0
minimum_size 300 0
maximum_width 340
alignment top_right
gap_x 10
gap_y 80
# Graphics settings #
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
# Text settings #
use_xft yes
xftfont dejavusansmono:size=10
xftalpha 0.9
# Pour affichier les caracteres speciaux
override_utf8_locale yes
short_units yes
uppercase no
temperature_unit celsius
default_color 7F7F7F #gris fer
color1 766F64 #ARDOISE
color2 FF7F00 #carotte
color3 BABABA #Étain
color4 FF0000 #rouge
color5 00561B #vert impérial
color6 34C924 #vert pomme
color7 149414 #emeraude
color8 096A09 #vert clair
## ││ ▽▼△▲▵▴▾▿ ◥▶◀◤ ✌
#
## │ ─ ┌ ┬ ┐ └ ┴ ┘ ├ ┼ ┤
#
## ║ ═ ╔ ╦ ╗ ╚ ╩ ╝ ╠ ╬ ╣
#lua_load ~/.conky/scripts/draw_bg.lua
#lua_draw_hook_pre draw_bg
lua_load ~/.conky/scripts/bargraph_small.lua
lua_draw_hook_post main_bars
TEXT
┌─┬${color3}Système${color}──────────────────────$color3${time %d/%m/%Y}$color
│ ├Bureaux ${goto 152}${desktop}/$desktop_number$color3${alignr 4}${time %H:%M:%S}$color
│ ├Uptime ${goto 152}${uptime}
│ ├Hostname ${goto 152}${nodename}
│ ├Linux ${goto 152}${kernel}
│ └Températures───┬C/M ${hwmon 0 temp 1}°C CPU ${hwmon 0 temp 2}°C
│ └C/G ${nvidia temp}°C HDD ${hddtemp /dev/sda}°C
├─┬${color3}Charge Système$color
│ ├┬Core 1 ${voffset 5}${goto 122}${freq_g 1} GHz${goto 210}${cpugraph cpu1 14,85 303030 149414}${alignr 6}${cpu cpu1}%${voffset -5}
│ │└───────────
│ ├┬Core 2 ${voffset 5}${goto 122}${freq_g 2} GHz${goto 210}${cpugraph cpu2 14,85 303030 149414}${alignr 6}${cpu cpu2}%${voffset -5}
│ │└───────────
│ ├┬Ram ${voffset 5}${goto 122}${mem}/$memmax${alignr 6}$memperc%${voffset -5}
│ │└───────────
│ └┬Swap ${voffset 5}${goto 122}${swap}/$swapmax${alignr 6}$swapperc%${voffset -5}
│ └───────────
│
├─┬${color3}Système de Fichiers$color
│ ├┬root ${voffset 5}${goto 122}${fs_used /}/${fs_size /}${goto 247}${diskiograph_read /dev/sda1 14,22 303030 149414}\
${goto 270}${diskiograph_write /dev/sda1 14,22 6E0B14 FF0000}${alignr 6}${fs_used_perc /}%${voffset -5}
│ │└───────────
│ └┬home ${voffset 5}${goto 122}${fs_used /home}/${fs_size /home}${goto 247}${diskiograph_read /dev/sda3 14,22 303030 149414}\
${goto 270}${diskiograph_write /dev/sda3 14,22 6E0B14 FF0000}${alignr 6}${fs_used_perc /home}%${voffset -5}
│ └───────────
│
├─┬${color3}Mini-Top${color}──────────load : $loadavg
│ ├───┬─────────────────────┬─────┬─────┐
│ │${goto 41}NOM${goto 216}CPU${goto 265}MEM${goto 313}PID
│ ├1.${color4}${top name 1}$alignr${top cpu 1}${top mem 1} ${top pid 1}$color
│ ├2.${color6}${top name 2}$alignr${top cpu 2}${top mem 2} ${top pid 2}$color
│ ├3.${color7}${top name 3}$alignr${top cpu 3}${top mem 3} ${top pid 3}$color
│ ├4.${color8}${top name 4}$alignr${top cpu 4}${top mem 4} ${top pid 4}$color
│ ├5.${color5}${top name 5}$alignr${top cpu 5}${top mem 5} ${top pid 5}$color
│ │${goto 41}Total ${alignr}${processes} ($running_processes en cours)
│ └────┴────────────────────┴─────┘
│
├─┬${color3}Net${color}───────────────\
(${goto 169}${texeci 5000 wget http://checkip.dyndns.org -O - -o /dev/null | cut -d : -f 2 | cut -d \< -f 1})
│ ├┬${color3}Eth0${color}─────────────(${addr eth0})
│ │${if_existing /sys/class/net/eth0/operstate up}├Sortant ${goto 101}${upspeedgraph eth0 14,60 303030 149414} ${upspeed eth0}/s${goto 240}↑${totalup eth0}
│ │└Entrant ${goto 101}${downspeedgraph eth0 14,60 6E0B14 FF0000} ${downspeed eth0}/s${goto 240}↓${totaldown eth0}$else└Débranché !$endif
│ ├┬${color3}Wlan0${color}────────────(${addr wlan0})
│ │${if_existing /sys/class/net/wlan0/operstate up}├Sortant ${goto 101}${upspeedgraph wlan0 14,60 303030 149414} ${upspeed wlan0}/s${goto 240}↑${totalup wlan0}
│ │├Entrant ${goto 101}${downspeedgraph wlan0 14,60 6E0B14 FF0000} ${downspeed wlan0}/s${goto 240}↓${totaldown wlan0}
│ │└Signal ${wireless_link_qual wlan0}%$else└Déconnecté !$endif
│ └┬${color3}Ports${color}─────────┬───────┐
│ ├Ouverts(${tcp_portmon 1 65535 count})${goto 137}In(${tcp_portmon 1 32767 count})${goto 201}Out(${tcp_portmon 32768 61000 count})
│ ├${tcp_portmon 1 65535 rport 0}${goto 95}${tcp_portmon 1 65535 rip 0}
│ ├${tcp_portmon 1 65535 rport 1}${goto 95}${tcp_portmon 1 65535 rip 1}
│ ├${tcp_portmon 1 65535 rport 2}${goto 95}${tcp_portmon 1 65535 rip 2}
│ ├${tcp_portmon 1 65535 rport 3}${goto 95}${tcp_portmon 1 65535 rip 3}
│ ├${tcp_portmon 1 65535 rport 4}${goto 95}${tcp_portmon 1 65535 rip 4}
│ ├${tcp_portmon 1 65535 rport 5}${goto 95}${tcp_portmon 1 65535 rip 5}
│ ├${tcp_portmon 1 65535 rport 6}${goto 95}${tcp_portmon 1 65535 rip 6}
│ ├${tcp_portmon 1 65535 rport 7}${goto 95}${tcp_portmon 1 65535 rip 7}
│ ├${tcp_portmon 1 65535 rport 8}${goto 95}${tcp_portmon 1 65535 rip 8}
│ ├${tcp_portmon 1 65535 rport 9}${goto 95}${tcp_portmon 1 65535 rip 9}
│ ├${tcp_portmon 1 65535 rport 10}${goto 95}${tcp_portmon 1 65535 rip 10}
│ └${tcp_portmon 1 65535 rport 11}${goto 95}${tcp_portmon 1 65535 rip 11}
│
└─┬${color3}Moc$color
${if_running mocp}├$color6${execpi 1 mocp -Q %state}$color
├${execpi 1 mocp -Q %artist}
├${execpi 1 mocp -Q %album}
├${execpi 1 mocp -Q %song}
├${execpi 1 mocp -Q %ct} / ${execpi 1 mocp -Q %tt}
└${execpi 1 mocp -Q %b}kbps${else}└Pas de musique !$endif
Et le script bargraph_small.lua de wlourf à placer dans ~/.conky/scripts :
--[[ BARGRAPH WIDGET
v2.1 by wlourf (07 Jan. 2011)
this widget draws a bargraph with different effects
http://u-scripts.blogspot.com/2010/07/bargraph-widget.html
To call the script in a conky, use, before TEXT
lua_load /path/to/the/script/bargraph.lua
lua_draw_hook_pre main_rings
and add one line (blank or not) after TEXT
Parameters are :
3 parameters are mandatory
name - the name of the conky variable to display, for example for {$cpu cpu0}, just write name="cpu"
arg - the argument of the above variable, for example for {$cpu cpu0}, just write arg="cpu0"
arg can be a numerical value if name=""
max - the maximum value the above variable can reach, for example, for {$cpu cpu0}, just write max=100
Optional parameters:
x,y - coordinates of the starting point of the bar, default = middle of the conky window
cap - end of cap line, ossibles values are r,b,s (for round, butt, square), default="b"
http://www.cairographics.org/samples/set_line_cap/
angle - angle of rotation of the bar in degress, default = 0 (i.e. a vertical bar)
set to 90 for an horizontal bar
skew_x - skew bar around x axis, default = 0
skew_y - skew bar around y axis, default = 0
blocks - number of blocks to display for a bar (values >0) , default= 10
height - height of a block, default=10 pixels
width - width of a block, default=20 pixels
space - space between 2 blocks, default=2 pixels
angle_bar - this angle is used to draw a bar on a circular way (ok, this is no more a bar !) default=0
radius - for cicular bars, internal radius, default=0
with radius, parameter width has no more effect.
Colours below are defined into braces {colour in hexadecimal, alpha}
fg_colour - colour of a block ON, default= {0x00FF00,1}
bg_colour - colour of a block OFF, default = {0x00FF00,0.5}
alarm - threshold, values after this threshold will use alarm_colour colour , default=max
alarm_colour - colour of a block greater than alarm, default=fg_colour
smooth - (true or false), create a gradient from fg_colour to bg_colour, default=false
mid_colour - colours to add to gradient, with this syntax {position into the gradient (0 to1), colour hexa, alpha}
for example, this table {{0.25,0xff0000,1},{0.5,0x00ff00,1},{0.75,0x0000ff,1}} will add
3 colurs to gradient created by fg_colour and alarm_colour, default=no mid_colour
led_effect - add LED effects to each block, default=no led_effect
if smooth=true, led_effect is not used
possibles values : "r","a","e" for radial, parallelel, perdendicular to the bar (just try!)
led_effect has to be used with theses colours :
fg_led - middle colour of a block ON, default = fg_colour
bg_led - middle colour of a block OFF, default = bg_colour
alarm_led - middle colour of a block > ALARM, default = alarm_colour
reflection parameters, not avaimable for circular bars
reflection_alpha - add a reflection effect (values from 0 to 1) default = 0 = no reflection
other values = starting opacity
reflection_scale - scale of the reflection (default = 1 = height of text)
reflection_length - length of reflection, define where the opacity will be set to zero
calues from 0 to 1, default =1
reflection - position of reflection, relative to a vertical bar, default="b"
possibles values are : "b","t","l","r" for bottom, top, left, right
draw_me - if set to false, text is not drawn (default = true or 1)
it can be used with a conky string, if the string returns 1, the text is drawn :
example : "${if_empty ${wireless_essid wlan0}}${else}1$endif",
v1.0 (10 Feb. 2010) original release
v1.1 (13 Feb. 2010) numeric values can be passed instead conky stats with parameters name="", arg = numeric_value
v1.2 (28 Feb. 2010) just renamed the widget to bargraph
v1.3 (03 Mar. 2010) added parameters radius & angle_bar to draw the bar in a circular way
v2.0 (12 Jul. 2010) rewrite script + add reflection effects and parameters are now set into tables
v2.1 (07 Jan. 2011) Add draw_me parameter and correct memory leaks, thanks to "Creamy Goodness"
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation version 3 (GPLv3)
--
-- This program is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
--
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software
-- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-- MA 02110-1301, USA.
]]
require 'cairo'
----------------START OF PARAMETERS ----------
function conky_main_bars()
local bars_settings={
{ --[ Graph for CPU1 ]--
name="cpu",
arg="cpu1",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.3},
fg_colour={0x00FF00,0.65},
mid_colour={{0.45,0xFFFF00,0.70}},
x=122,y=158,
blocks=108,
space=1,
height=1,width=12,
angle=90,
smooth=true
},
{ --[ Graph for CPU2 ]--
name="cpu",
arg="cpu2",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.3},
fg_colour={0x00FF00,0.65},
mid_colour={{0.45,0xFFFF00,0.70}},
x=122,y=192,
blocks=108,
space=1,
height=1,width=12,
angle=90,
smooth=true
},
{ --[ Graph for Memory ]--
name="memperc",
arg="",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.3},
fg_colour={0x00FF00,0.65},
mid_colour={{0.45,0xFFFF00,0.70}},
x=122,y=226,
blocks=108,
space=1,
height=1,width=12,
angle=90,
smooth=true
},
{ --[ Graph for Root ]--
name="fs_used_perc",
arg="/",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.3},
fg_colour={0x00FF00,0.65},
mid_colour={{0.45,0xFFFF00,0.70}},
x=122,y=328,
blocks=108,
space=1,
height=1,width=12,
angle=90,
smooth=true
},
{ --[ Graph for Root ]--
name="fs_used_perc",
arg="/home",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.3},
fg_colour={0x00FF00,0.65},
mid_colour={{0.45,0xFFFF00,0.70}},
x=122,y=362,
blocks=108,
space=1,
height=1,width=12,
angle=90,
smooth=true
},
{ --[ Graph for Swap ]--
name="swapperc",
arg="",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.3},
fg_colour={0x00FF00,0.65},
mid_colour={{0.45,0xFFFF00,0.70}},
x=122,y=260,
blocks=108,
space=1,
height=1,width=12,
angle=90,
smooth=true
},
}
-----------END OF PARAMETERS--------------
if conky_window == nil then return end
local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
cr = cairo_create(cs)
--prevent segmentation error when reading cpu state
if tonumber(conky_parse('${updates}'))>3 then
for i in pairs(bars_settings) do
draw_multi_bar_graph(bars_settings[i])
end
end
cairo_destroy(cr)
cairo_surface_destroy(cs)
cr=nil
end
function draw_multi_bar_graph(t)
cairo_save(cr)
--check values
if t.draw_me == true then t.draw_me = nil end
if t.draw_me ~= nil and conky_parse(tostring(t.draw_me)) ~= "1" then return end
if t.name==nil and t.arg==nil then
print ("No input values ... use parameters 'name' with 'arg' or only parameter 'arg' ")
return
end
if t.max==nil then
print ("No maximum value defined, use 'max'")
return
end
if t.name==nil then t.name="" end
if t.arg==nil then t.arg="" end
--set default values
if t.x == nil then t.x = conky_window.width/2 end
if t.y == nil then t.y = conky_window.height/2 end
if t.blocks == nil then t.blocks=10 end
if t.height == nil then t.height=10 end
if t.angle == nil then t.angle=0 end
t.angle = t.angle*math.pi/180
--line cap style
if t.cap==nil then t.cap = "b" end
local cap="b"
for i,v in ipairs({"s","r","b"}) do
if v==t.cap then cap=v end
end
local delta=0
if t.cap=="r" or t.cap=="s" then delta = t.height end
if cap=="s" then cap = CAIRO_LINE_CAP_SQUARE
elseif cap=="r" then
cap = CAIRO_LINE_CAP_ROUND
elseif cap=="b" then
cap = CAIRO_LINE_CAP_BUTT
end
--end line cap style
--if t.led_effect == nil then t.led_effect="r" end
if t.width == nil then t.width=20 end
if t.space == nil then t.space=2 end
if t.radius == nil then t.radius=0 end
if t.angle_bar == nil then t.angle_bar=0 end
t.angle_bar = t.angle_bar*math.pi/360 --halt angle
--colours
if t.bg_colour == nil then t.bg_colour = {0x00FF00,0.5} end
if #t.bg_colour~=2 then t.bg_colour = {0x00FF00,0.5} end
if t.fg_colour == nil then t.fg_colour = {0x00FF00,1} end
if #t.fg_colour~=2 then t.fg_colour = {0x00FF00,1} end
if t.alarm_colour == nil then t.alarm_colour = t.fg_colour end
if #t.alarm_colour~=2 then t.alarm_colour = t.fg_colour end
if t.mid_colour ~= nil then
for i=1, #t.mid_colour do
if #t.mid_colour[i]~=3 then
print ("error in mid_color table")
t.mid_colour[i]={1,0xFFFFFF,1}
end
end
end
if t.bg_led ~= nil and #t.bg_led~=2 then t.bg_led = t.bg_colour end
if t.fg_led ~= nil and #t.fg_led~=2 then t.fg_led = t.fg_colour end
if t.alarm_led~= nil and #t.alarm_led~=2 then t.alarm_led = t.fg_led end
if t.led_effect~=nil then
if t.bg_led == nil then t.bg_led = t.bg_colour end
if t.fg_led == nil then t.fg_led = t.fg_colour end
if t.alarm_led == nil then t.alarm_led = t.fg_led end
end
if t.alarm==nil then t.alarm = t.max end --0.8*t.max end
if t.smooth == nil then t.smooth = false end
if t.skew_x == nil then
t.skew_x=0
else
t.skew_x = math.pi*t.skew_x/180
end
if t.skew_y == nil then
t.skew_y=0
else
t.skew_y = math.pi*t.skew_y/180
end
if t.reflection_alpha==nil then t.reflection_alpha=0 end
if t.reflection_length==nil then t.reflection_length=1 end
if t.reflection_scale==nil then t.reflection_scale=1 end
--end of default values
local function rgb_to_r_g_b(col_a)
return ((col_a[1] / 0x10000) % 0x100) / 255., ((col_a[1] / 0x100) % 0x100) / 255., (col_a[1] % 0x100) / 255., col_a[2]
end
--functions used to create patterns
local function create_smooth_linear_gradient(x0,y0,x1,y1)
local pat = cairo_pattern_create_linear (x0,y0,x1,y1)
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(t.fg_colour))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(t.alarm_colour))
if t.mid_colour ~=nil then
for i=1, #t.mid_colour do
cairo_pattern_add_color_stop_rgba (pat, t.mid_colour[i][1], rgb_to_r_g_b({t.mid_colour[i][2],t.mid_colour[i][3]}))
end
end
return pat
end
local function create_smooth_radial_gradient(x0,y0,r0,x1,y1,r1)
local pat = cairo_pattern_create_radial (x0,y0,r0,x1,y1,r1)
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(t.fg_colour))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(t.alarm_colour))
if t.mid_colour ~=nil then
for i=1, #t.mid_colour do
cairo_pattern_add_color_stop_rgba (pat, t.mid_colour[i][1], rgb_to_r_g_b({t.mid_colour[i][2],t.mid_colour[i][3]}))
end
end
return pat
end
local function create_led_linear_gradient(x0,y0,x1,y1,col_alp,col_led)
local pat = cairo_pattern_create_linear (x0,y0,x1,y1) ---delta, 0,delta+ t.width,0)
cairo_pattern_add_color_stop_rgba (pat, 0.0, rgb_to_r_g_b(col_alp))
cairo_pattern_add_color_stop_rgba (pat, 0.5, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1.0, rgb_to_r_g_b(col_alp))
return pat
end
local function create_led_radial_gradient(x0,y0,r0,x1,y1,r1,col_alp,col_led,mode)
local pat = cairo_pattern_create_radial (x0,y0,r0,x1,y1,r1)
if mode==3 then
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(col_alp))
cairo_pattern_add_color_stop_rgba (pat, 0.5, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(col_alp))
else
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(col_alp))
end
return pat
end
local function draw_single_bar()
--this fucntion is used for bars with a single block (blocks=1) but
--the drawing is cut in 3 blocks : value/alarm/background
--not zvzimzblr for circular bar
local function create_pattern(col_alp,col_led,bg)
local pat
if not t.smooth then
if t.led_effect=="e" then
pat = create_led_linear_gradient (-delta, 0,delta+ t.width,0,col_alp,col_led)
elseif t.led_effect=="a" then
pat = create_led_linear_gradient (t.width/2, 0,t.width/2,-t.height,col_alp,col_led)
elseif t.led_effect=="r" then
pat = create_led_radial_gradient (t.width/2, -t.height/2, 0, t.width/2,-t.height/2,t.height/1.5,col_alp,col_led,2)
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(col_alp))
end
else
if bg then
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(t.bg_colour))
else
pat = create_smooth_linear_gradient(t.width/2, 0, t.width/2,-t.height)
end
end
return pat
end
local y1=-t.height*pct/100
local y2,y3
if pct>(100*t.alarm/t.max) then
y1 = -t.height*t.alarm/100
y2 = -t.height*pct/100
if t.smooth then y1=y2 end
end
if t.angle_bar==0 then
--block for fg value
local pat = create_pattern(t.fg_colour,t.fg_led,false)
cairo_set_source(cr,pat)
cairo_rectangle(cr,0,0,t.width,y1)
cairo_fill(cr)
cairo_pattern_destroy(pat)
-- block for alarm value
if not t.smooth and y2 ~=nil then
pat = create_pattern(t.alarm_colour,t.alarm_led,false)
cairo_set_source(cr,pat)
cairo_rectangle(cr,0,y1,t.width,y2-y1)
cairo_fill(cr)
y3=y2
cairo_pattern_destroy(pat)
else
y2,y3=y1,y1
end
-- block for bg value
cairo_rectangle(cr,0,y2,t.width,-t.height-y3)
pat = create_pattern(t.bg_colour,t.bg_led,true)
cairo_set_source(cr,pat)
cairo_pattern_destroy(pat)
cairo_fill(cr)
end
end --end single bar
local function draw_multi_bar()
--function used for bars with 2 or more blocks
for pt = 1,t.blocks do
--set block y
local y1 = -(pt-1)*(t.height+t.space)
local light_on=false
--set colors
local col_alp = t.bg_colour
local col_led = t.bg_led
if pct>=(100/t.blocks) or pct>0 then --ligth on or not the block
if pct>=(pcb*(pt-1)) then
light_on = true
col_alp = t.fg_colour
col_led = t.fg_led
if pct>=(100*t.alarm/t.max) and (pcb*pt)>(100*t.alarm/t.max) then
col_alp = t.alarm_colour
col_led = t.alarm_led
end
end
end
--set colors
--have to try to create gradients outside the loop ?
local pat
if not t.smooth then
if t.angle_bar==0 then
if t.led_effect=="e" then
pat = create_led_linear_gradient (-delta, 0,delta+ t.width,0,col_alp,col_led)
elseif t.led_effect=="a" then
pat = create_led_linear_gradient (t.width/2, -t.height/2+y1,t.width/2,0+t.height/2+y1,col_alp,col_led)
elseif t.led_effect=="r" then
pat = create_led_radial_gradient (t.width/2, y1, 0, t.width/2,y1,t.width/1.5,col_alp,col_led,2)
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(col_alp))
end
else
if t.led_effect=="a" then
pat = create_led_radial_gradient (0, 0, t.radius+(t.height+t.space)*(pt-1),
0, 0, t.radius+(t.height+t.space)*(pt),
col_alp,col_led,3)
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(col_alp))
end
end
else
if light_on then
if t.angle_bar==0 then
pat = create_smooth_linear_gradient(t.width/2, t.height/2, t.width/2,-(t.blocks-0.5)*(t.height+t.space))
else
pat = create_smooth_radial_gradient(0, 0, (t.height+t.space), 0,0,(t.blocks+1)*(t.height+t.space),2)
end
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(t.bg_colour))
end
end
cairo_set_source (cr, pat)
cairo_pattern_destroy(pat)
--draw a block
if t.angle_bar==0 then
cairo_move_to(cr,0,y1)
cairo_line_to(cr,t.width,y1)
else
cairo_arc( cr,0,0,
t.radius+(t.height+t.space)*(pt)-t.height/2,
-t.angle_bar -math.pi/2 ,
t.angle_bar -math.pi/2)
end
cairo_stroke(cr)
end
end
local function setup_bar_graph()
--function used to retrieve the value to display and to set the cairo structure
if t.blocks ~=1 then t.y=t.y-t.height/2 end
local value = 0
if t.name ~="" then
value = tonumber(conky_parse(string.format('${%s %s}', t.name, t.arg)))
--$to_bytes doesn't work when value has a decimal point,
--https://garage.maemo.org/plugins/ggit/browse.php/?p=monky;a=commitdiff;h=174c256c81a027a2ea406f5f37dc036fac0a524b;hp=d75e2db5ed3fc788fb8514121f67316ac3e5f29f
--http://sourceforge.net/tracker/index.php?func=detail&aid=3000865&group_id=143975&atid=757310
--conky bug?
--value = (conky_parse(string.format('${%s %s}', t.name, t.arg)))
--if string.match(value,"%w") then
-- value = conky_parse(string.format('${to_bytes %s}',value))
--end
else
value = tonumber(t.arg)
end
if value==nil then value =0 end
pct = 100*value/t.max
pcb = 100/t.blocks
cairo_set_line_width (cr, t.height)
cairo_set_line_cap (cr, cap)
cairo_translate(cr,t.x,t.y)
cairo_rotate(cr,t.angle)
local matrix0 = cairo_matrix_t:create()
tolua.takeownership(matrix0)
cairo_matrix_init (matrix0, 1,t.skew_y,t.skew_x,1,0,0)
cairo_transform(cr,matrix0)
--call the drawing function for blocks
if t.blocks==1 and t.angle_bar==0 then
draw_single_bar()
if t.reflection=="t" or t.reflection=="b" then cairo_translate(cr,0,-t.height) end
else
draw_multi_bar()
end
--dot for reminder
--[[
if t.blocks ~=1 then
cairo_set_source_rgba(cr,1,0,0,1)
cairo_arc(cr,0,t.height/2,3,0,2*math.pi)
cairo_fill(cr)
else
cairo_set_source_rgba(cr,1,0,0,1)
cairo_arc(cr,0,0,3,0,2*math.pi)
cairo_fill(cr)
end]]
--call the drawing function for reflection and prepare the mask used
if t.reflection_alpha>0 and t.angle_bar==0 then
local pat2
local matrix1 = cairo_matrix_t:create()
tolua.takeownership(matrix1)
if t.angle_bar==0 then
pts={-delta/2,(t.height+t.space)/2,t.width+delta,-(t.height+t.space)*(t.blocks)}
if t.reflection=="t" then
cairo_matrix_init (matrix1,1,0,0,-t.reflection_scale,0,-(t.height+t.space)*(t.blocks-0.5)*2*(t.reflection_scale+1)/2)
pat2 = cairo_pattern_create_linear (t.width/2,-(t.height+t.space)*(t.blocks),t.width/2,(t.height+t.space)/2)
elseif t.reflection=="r" then
cairo_matrix_init (matrix1,-t.reflection_scale,0,0,1,delta+2*t.width,0)
pat2 = cairo_pattern_create_linear (delta/2+t.width,0,-delta/2,0)
elseif t.reflection=="l" then
cairo_matrix_init (matrix1,-t.reflection_scale,0,0,1,-delta,0)
pat2 = cairo_pattern_create_linear (-delta/2,0,delta/2+t.width,-0)
else --bottom
cairo_matrix_init (matrix1,1,0,0,-1*t.reflection_scale,0,(t.height+t.space)*(t.reflection_scale+1)/2)
pat2 = cairo_pattern_create_linear (t.width/2,(t.height+t.space)/2,t.width/2,-(t.height+t.space)*(t.blocks))
end
end
cairo_transform(cr,matrix1)
if t.blocks==1 and t.angle_bar==0 then
draw_single_bar()
cairo_translate(cr,0,-t.height/2)
else
draw_multi_bar()
end
cairo_set_line_width(cr,0.01)
cairo_pattern_add_color_stop_rgba (pat2, 0,0,0,0,1-t.reflection_alpha)
cairo_pattern_add_color_stop_rgba (pat2, t.reflection_length,0,0,0,1)
if t.angle_bar==0 then
cairo_rectangle(cr,pts[1],pts[2],pts[3],pts[4])
end
cairo_clip_preserve(cr)
cairo_set_operator(cr,CAIRO_OPERATOR_CLEAR)
cairo_stroke(cr)
cairo_mask(cr,pat2)
cairo_pattern_destroy(pat2)
cairo_set_operator(cr,CAIRO_OPERATOR_OVER)
end --reflection
pct,pcb=nil
end --setup_bar_graph()
--start here !
setup_bar_graph()
cairo_restore(cr)
end
Dernière modification par tsagobar (Le 17/08/2013, à 11:50)
Hors ligne
#183 Le 17/08/2013, à 08:24
- F50
Re : A quoi ressemble votre environnement -- Printemps/été 2013
@ golgot200: Je ne veux pas non plus de 18'000 paquets KDE, je suis sous Xfce. Pour le spectro, y'a pas eu foule dans le lien que tu as mis, dommage.
#185 Le 19/08/2013, à 13:08
- Compte anonymisé
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Bonjour,
@fcn50
J'ai découvert QMMP , un player style Winamp , il a un plugin Analyser comme j'aime bien. Par contre les Skins Version Winamp 2 sont chiant pour la transparence ( Coins arrondis non transparent). Les skins proposés sont horribles à mon goût. Ça manque vraiment de finition en double size. Je me fais mon skin maison pour que ça colle à mon bureau. L'analyser est bien et garde bien sa position une fois placé sur le bureau.
Dernière modification par Compte anonymisé (Le 19/08/2013, à 13:14)
#186 Le 19/08/2013, à 13:48
- F50
Re : A quoi ressemble votre environnement -- Printemps/été 2013
@ golgot200: Merci mais y'a un cadre à ce spectro c'est pas incrusté dans le bureau... Je vais contacter le dev de Deadbeef pour voir si y'a rien de faisable de ce côté et te tiens au courant.
#188 Le 20/08/2013, à 09:50
- F50
Re : A quoi ressemble votre environnement -- Printemps/été 2013
La classe bravo, mais je suis sous Xfce et je ne pense pas que ce soit possible. Tu arrives à le rendre transparent? Ce serait le top.
#189 Le 20/08/2013, à 10:28
- Compte anonymisé
Re : A quoi ressemble votre environnement -- Printemps/été 2013
#190 Le 20/08/2013, à 11:11
- F50
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Pour l'instant, je trouve juste la transparence du player etc mais pas dans le plugin Analyzer ....
C'est pourtant ce qui serait chouette, de l'avoir en transparent sur le bureau avec uniquement les colonnes visibles. Les couleurs du spectro sont fixes ou on peut les changer?
#191 Le 20/08/2013, à 11:27
- Compte anonymisé
Re : A quoi ressemble votre environnement -- Printemps/été 2013
On peut tout changer, couleurs épaisseur vitesse etc (post 185 et maintenant)
Dernière modification par Compte anonymisé (Le 20/08/2013, à 11:29)
#192 Le 21/08/2013, à 08:23
- F50
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Perso, celui que je regrette c'est le Visualisation: Spectrum de Foobar2000:
#193 Le 21/08/2013, à 14:09
- Compte anonymisé
Re : A quoi ressemble votre environnement -- Printemps/été 2013
@fcn50
Il tourne bien avec Wine 1.6 et s'intègre pas mal ...
EDIT : mais bon, je ne suis pas vraiment pour wine
Dernière modification par Compte anonymisé (Le 21/08/2013, à 14:45)
#194 Le 22/08/2013, à 07:04
- F50
Re : A quoi ressemble votre environnement -- Printemps/été 2013
EDIT : mais bon, je ne suis pas vraiment pour wine
Moins non plus, Deadbeef me va bien, c'est un peu le Foobar2000 de nunux.
#195 Le 22/08/2013, à 12:34
- Compte anonymisé
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Bonjour,
le mien toujours en chantier ....
Un GMMP qui reste bien à sa place. J'ai trouvé son fichier .conkyrc que je vais essayer d'ici peu.
J'aimerai virer l'icône par défaut de cette application (GMMP et son style sphère papillon) mais pas moyen. Une solution ?
Dernière modification par Compte anonymisé (Le 22/08/2013, à 12:37)
#196 Le 22/08/2013, à 12:42
- spinoziste
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Peut-être le recompiler avec les icônes qui vont bien .
Nous mourrons tous .
Hors ligne
#197 Le 22/08/2013, à 15:13
- stalingrad
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Hors ligne
#198 Le 23/08/2013, à 10:54
- Compte anonymisé
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Peut-être le recompiler avec les icônes qui vont bien .
Oui, j'avais pensé à cette solution.
J'en ai trouvé une autre. Virer le plasmoid gestionnaire de taches par défaut dans le tableau de bord. Le remplacer par un gestionnaire de taches avec icônes uniquement et choisir l'option avec icônes uniquement et mettre un fond coloré me va très bien.
Dernière modification par Compte anonymisé (Le 23/08/2013, à 10:56)
#199 Le 23/08/2013, à 15:36
- petzouill
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Bonjour.
J'aime beaucoup ton pack d'icones. Peux tu me donner le nom, que je me le procure.
Merci.
Ubuntu 12.04
Phenom II x6 1055
GeForce GT 220
Hors ligne
#200 Le 23/08/2013, à 17:38
- stalingrad
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Il s'appelle Nitrux, trouvé sur cette page.
Hors ligne